Multitech RF802 Quick Start Manual

1. Right click on My Computer located on the desktop � Properties � click the Hardware tab � Device Manager 2. Click Network adapters, and then remove Wireless USB RF802USB. 3. Click Windows Explorer � C:\ Program Files � Remove Wireless USB RF802USB. 4. Click Start � Run � type “ regedit “ command, � Local machine � System � Current control set � Enum � Remove USB RF802USB Important: Restart your PC to make the changes effective before you reinstall the driver. ...

cell and across access points (subject to access point) Network Protocol TCP/IP, IPX, NDIS3, NDIS4 Management Ability Link Config for network join and diagnosis EMC Certification FCC Part 15 Class in US, ETSI 300.328 and CE EMC-EEC in Europe, ARIB-Telec in Japan Packaging Generic, Multi-Tech Systems, Inc., private labeling optional Data Encryption 64 bit and 128 Bit WEP Encryption Supported Bit Rates 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps Utility Software Configuration Utility Software Standards IEEE 802.11b Transpo ...

When Associated fields are listed, the normal flow of operation is Infrastructure Mode, the PC is connected to its access point, and networking is available. BSSID is shown in the form of hex digits. Tx/Rx Rate Information Group The Tx Packets and Rx Packets display the instantaneous wireless Receive and Transmit throughput displayed in bytes per second. These values are updated every two seconds. Signal Strength The Signal Strength sliding bar displays the quality of the link between the node and its Access Point. This bar is active only when the n ...

Select a key and then enter the keys in the corresponding fields. Mode There are two options. The default is Mandatory. Mandatory Mode – This mode is the WEP encryption that should be used. The other station also needs to use WEP encryption in order to establish a communication with your station. This mode is required for compliance with the IEEE 802.11b standard. Optional Mode - This mode allows your station to communicate with other stations that may or may not use WEP encryption. Authentication Type There are two options. The default is Open System. Open Sy ...

control are provided by the Configuration Utility. Usually, this application starts automatically. To start the utility manually, click the Start button, > Programs, > UBS 11 Mbps Wireless Network Adapter. A new icon should appear in your Icon tray. If the icon is green, the Wireless USB adapter is configured right. If the icon is red, the Wireless USB adapter configuration is invalid or complete. In this case, re-check your configuration by following the same steps you will use in t ...

Multi-Tech Systems, Inc., (hereafter “MTS”) warrants that its products will be free from defects in material or workmanship for a period of two years from date of purchase, or if proof of purchase is not provided, two years from date of shipment. MTS MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. This warranty does not apply to any products which have been damaged by lightning storms, water, or power surges or whi ...

application version numbers. Use this information when contacting Tech Support. Configuration Utility with About Tab Selected ...