NEC MULTISYNC LCD1510+ Operation & User’s Manual
Text of the manual
NEC LCD Series
NEC LCD Series
You can
register your
product online at
www.nectech.com/
productregistration
78134702.wpc
8/20/99, 10:46 AM
1
Mise en marche rapide
23-27
Commandes
28-30
Usage recommandé
31-32
Fiche technique
33
Fonctions
34
Dépannage
35
Références
36
Garantie limitée
37
TCO�
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE
THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS
CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
WARNING
CAUTION
CAU
Your new NEC Technologies MultiSync® LCD monitor box* should
contain the following:
• MultiSync LCD1510+™ Monitor with
tilt/swivel/pivot stand
• Power Cord (Part # 79PM1764)
• AC Adapter (#A1240T01)
• Video Signal Cable
• User’s Manual
• Pivot® Driver Software CD
Contents
2
* Remember to save your original box and packing material to transp
To attach your MultiSync® LCD monitor to your system, follow these
instructions:
1. Turn off the power to your computer.
2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable
to the connector of the display card in your system (Figure A.1). Tighten all screws.
For the Mac: Connect the MultiSync Macintosh cable adapter to t
