NEC MT40 - Introduction Manual
Text of the manual
The interactive remote control demonstrates the features,
functions, settings and adjustable menus of the remote
controls for the LT series and MT series.
Simply click any button on the remote control on the left to
display descriptions of the menus and functions.
Click the menus and submenus to display more detailed
descriptions.
Your projector
The input switches each time this button is pressed. (RGB a
Video a S-Video a PC Card Viewer)
AUTO ADJUST button
Press this to automatically adjust the vertical/horizontal
position, clock frequency/phase and resolution if the
projected picture is not centered, if there are vertical stripes
on the picture or if the picture is flickering. (The Position and
Pixel Adjust are only adjusted for RGB inputs.)
Menu buttons/On-screen menu
When pressed, the main menu appears. Use the LM buttons
to select the submenus or adjustment or setting items.
See below for a list of the remote control unit buttons that can
be used while the menu is displayed and the functions of the
menus and dialog box elements.
LM buttons
: Used to select items on menus or elements
in dialo
Close box (x)
: Closes the window without saving the setting or adjustment values.
Highlight
: Indicates that the menu or item is selected.
Solid triangle button : Indicates that there are selection items on the pull-down menu.
Tabs
: Indicate the number of pages when the item in the dialog box is
divided on more than one page.
Radio buttons
: Select the dia
