NETGEAR TA612V Reference Manual

Connecting the Router to the Internet 3-5 202-10037-01, March 2005 2. Connect to the broadband voice adapter by typing http://192.168.61.1 in the address field of your browser, then click Enter. Figure 3-5: Login address 3. For security reasons, the router has its own user name and password. When prompted, enter admin for the router user name and password for the router password in lower case letters. Note: The router user name and password are not the same as any user name or password you may use to log in to your Internet connection. A ...

Preparing Your Network C-17 202-10037-01, March 2005 Verifying TCP/IP Properties for Windows XP, 2000, and NT4 To check your PC’s TCP/IP configuration: 1. On the Windows taskbar, click the Start button, and then click Run. The Run window opens. 2. Type cmd and then click OK. A command window opens 3. Type ipconfig /all Your IP Configuration information will be listed, and should match the values below if you are using the default TCP/IP settings that NETGEAR recommends for connecting through a router or gateway: • The IP address is be ...

5-6 Maintenance 202-10037-01, March 2005 • LAN Port – MAC Address - the physical address of the router, as seen from the local LAN. • Line 1/Line 2 – Display Name: This is the name you have already chosen when you first opened your account. Your "Display Name" will be visible to other individuals with caller ID. If your display name appears as "UNAVAILABLE", either your account has not been established or your router has been unable to connect to the Internet. – Telephone Number: This is the telephone number other people will us ...

C-20 Preparing Your Network 202-10037-01, March 2005 Verifying the Readiness of Your Internet Account For broadband access to the Internet, you need to contract with an Internet service provider (ISP) for a single-user Internet access account using a cable modem or DSL modem. This modem must be a separate physical box (not a card) and must provide an Ethernet port intended for connection to a Network Interface Card (NIC) in a computer. Your firewall does not support a USB-connected broadband modem. For a single-user Internet account, your ...

Preparing Your Network C-19 202-10037-01, March 2005 2. If not already selected, select Built-in Ethernet in the Configure list. 3. If not already selected, Select Using DHCP in the TCP/IP tab. 4. Click Save. Verifying TCP/IP Properties for Macintosh Computers After your Macintosh is configured and has rebooted, you can check the TCP/IP configuration by returning to the TCP/IP Control Panel. From the Apple menu, select Control Panels, then TCP/IP. The panel is updated to show your settings, which should match the values below if you are u ...

vi Contents Blocking Access to Internet Services .............................................................................4-2 Configuring E-Mail Alert and Web Access Log Notifications ..........................................4-4 Viewing Logs of Web Access or Attempted Web Access ...............................................4-6 Chapter 5 Maintenance Viewing Status Information .............................................................................................5-1 Viewing VoIP Status ......................................................................... ...