NETGEAR WGT624 - 108 Mbps Wireless Firewall Router Reference Manual

C-6 Preparing Your Network 202-10090-01, April 2005 Selecting Windows’ Internet Access Method 1. On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Internet Options icon. 3. Select “I want to set up my Internet connection manually” or “I want to connect through a Local Area Network” and click Next. 4. Select “I want to connect through a Local Area Network” and click Next. 5. Uncheck all boxes in the LAN Internet Configuration screen and click Next ...

6-18 Advanced Configuration 202-10090-01, April 2005 b. To allow access from a range of IP addresses on the Internet, select IP address range. Enter a beginning and ending IP address to define the allowed range. c. To allow access from a single IP address on the Internet, select Only this PC. Enter the IP address that will be allowed access. 3. Specify the Port Number that will be used for accessing the management interface. web browser access normally uses the standard HTTP service port 80. For greater security, you can chan ...

About This Manual 1-3 202-10090-01, April 2005 How to Print this Manual To print this manual you can choose one of the following several options, according to your needs. • Printing a Page in the HTML View. Each page in the HTML version of the manual is dedicated to a major topic. Use the Print button on the browser toolbar to print the page contents. • Printing a Chapter. Use the PDF of This Chapter link at the top left of any page. – Click the PDF of This Chapter link at the top right of any page in the chapter you wa ...

C-4 Preparing Your Network 202-10090-01, April 2005 If you need Client for Microsoft Networks: a. Click the Add button. b. Select Client, and then click Add. c. Select Microsoft. d. Select Client for Microsoft Networks, and then click OK. 3. Restart your PC for the changes to take effect. Enabling DHCP to Automatically Configure TCP/IP Settings After the TCP/IP protocol components are installed, each PC must be assigned specific information about itself and resources that are available on its network. The simplest way to conf ...

Advanced Configuration 6-15 202-10090-01, April 2005 How to Configure Static Routes Static Routes provide additional routing information to your router. Under normal circumstances, the router has adequate routing information after it has been configured for Internet access, and you do not need to configure additional static routes. You must configure static routes only for unusual cases such as multiple routers or multiple IP subnets located on your network. From the Main Menu of the browser interface, under Advanced, click o ...

Wireless Networking Basics D-13 202-10090-01, April 2005 Figure 4-7: 802.1x Authentication Sequence The AP sends Beacon Frames with WPA/WPA2 information element to the stations in the service set. Information elements include the required authentication method (802.1x or Pre-shared key) and the preferred cipher suite (WEP, TKIP, or AES). Probe Responses (AP to station) and Association Requests (station to AP) also contain WPA information elements. 1. Initial 802.1x communications begin with an unauthenticated supplicant (cli ...

C-2 Preparing Your Network 202-10090-01, April 2005 In your IP network, each PC and the firewall must be assigned a unique IP addresses. Each PC must also have certain other IP configuration information such as a subnet mask (netmask), a domain name server (DNS) address, and a default gateway address. In most cases, you should install TCP/IP so that the PC obtains its specific network configuration information automatically from a DHCP server during bootup. For a detailed explanation of the meaning and purpose of these config ...

Configuring the Internet and Wireless Settings 3-7 202-10090-01, April 2005 Click an item in the leftmost column. The current settings or information for that area appear in the center column. Helpful information related to the selected Settings page appears in this column. If you are using Internet Explorer, you may click an item in the center column to jump directly to the related help section; otherwise, scroll down until you reach it. For the most current documentation, go to: http://kbserver.netgear.com/products_automati ...