NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart Switch Software Administration Manual

Introduction to the Web Browser Interface 2-15 v1.1, September 2009 ...

x v1.1, September 2009 • Chapter 6, “Managing Security” describes how to configure security. • Chapter 7, “Monitoring the Switch” describes how to configure switch monitoring. • Chapter 8, “Maintenance” describes the firmware upgrade procedure and reset functions. • Chapter 9, “Online Help” describes how to obtain online help and support. • Appendix A, “Default Settings” gives FS728TP Smart Switch specifications and lists default feature values. Conventions, Formats, and Scope The conventions, formats, and scope ...

3-32 Managing System Settings v1.1, September 2009 • Authentication Notifications – Select the SNMP authentication failure notification status on the device. The possible field values are: – Disable – Disables the device from sending authentication failure notifications. – Enable – Enables the device to send authentication failure notifications. This is the default value. 2. Select either Enable or Disable in the SNMP Notifications provided field. 3. Select either Enable or Disable in the Authentication Notifications provided fiel ...

Monitoring the Switch 7-17 v1.1, September 2009 To add a history control entry: 1. Click Monitoring >RMON > Advanced > History Control. The RMON History Control screen displays. 2. Enter the Source Interface, Sampling Interval, Samples Requested and Owner in the provided field in the first row. 3. Click ADD to update the device. To remove a history control entry: 1. Click Monitoring >RMON > Advanced > History Control. The RMON History Control screen displays. 2. Select the history control entry. 3. Click DELETE to remove the history control e ...