Nike TRIAX C10 Quick Start Manual

TIME mode Set Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Set Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 RUN mode Using the Chronograph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Setting Heart Rate Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Customizing Primary Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setting “My View” Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 INTERVAL mode Setting Training Intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 DATA mode Review Saved Runs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Heart Rate Intensity Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Linking the HR Transmitter to the Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 FCC Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 This document with updates is available online at www.niketiming.com Printed on Wood Free Paper

3 1 2 4 Push tab up through slot in HR transmitter. Press down tab until flush. Attach other side of HR transmitter around chest. Position on rib cage just below the breast plate. The transmitter should be worn directly against skin and snug enough to stay in place during workout. Generously wet both grooved areas on the back of the HR transmitter to ensure a strong connection between your pulse and the transmitter.

Chronograph View Heart-Rate View My View See page 10 for setup or No Heart Rate Displayed If you see three blinking lines in the display, the watch is not receiving transmission from the HR transmitter. Run through the Quick Start again or see page 15 Troubleshooting. HRM linking If you see the HRM LINK display within either RUN or INTR mode, the watch is not recognizing the digital ID of the HR transmitter. See page 14, Linking the HR Transmitter to the Watch.

the button chime ON and OFF. Follow steps through to set the time and date. 4 EXIT 3 sec Scroll to TIME mode Press button to select adjustable element. Switch Time Zones Hold 1 sec to view Hold 4 sec to switch. 4 sec Turn Chime ON/OFF Chime sounds at the press of any button. Electrolight ON Set Hour Set Minutes Set Seconds Set Day Set Month Set Year Choose 12 or 24 Hour Clock Power Save (0-24 hrs.) After X hours with no activity, watch goes to sleep. Push any button to wake. Alarm will still function.

Set Alarm EXIT (Alarm On) 3sec Scroll to TIME mode Press button to select adjustable element. Set Hour Set Minutes Alarm 1 View Alarm 2 View Time View Turn Alarm ON/OFF The alarm icon will show in the display of any mode when the alarm is turned ON.

times during your run. Both lap times and total times are captured simultaneously when you press the lap button. Average heart rate is also captured for each lap/total period. After you stop the chronograph, you can save your run information and review it in DATA mode. See page 12 for DATA mode. Follow steps through to use your chronograph. Using the Chronograph 4 Press button to switch views at any time during your run. Scroll to RUN mode CHRONOGRAPH View Heart-Rate View My View See page 10 for setup Mark Laps Lap time is the time required to go once around a track or complete a segment of a run. and Mark Totals Total time is the time from the beginning of the run up to the point you mark. Start Run A blinking stopwatch will appear. LAP 1 TOTAL 1 Mark Lap/Total You will have 7 seconds to read your lap and total time. Heart rate is also captured for each lap/total period and can be viewed in DATA mode if the run is saved.

Run Information LAP 2 TOTAL 2 Mark Lap/Total LAP 3 LAP 4 TOTAL 4 TOTAL 3 Mark Lap/Total Stop Run Stopwatch will disappear. Save Run Run information is saved to DATA mode. See Page 12 for DATA mode. 3 sec 3 sec Clear Run Run information is erased.

lower heart-rate limit. Follow steps through to set a target heart-rate zone. Setting Heart Rate Zone 4 EXIT 4 sec Scroll to RUN mode Press button to select adjustable element. Turn Heart-Rate Zone ON Set HIGH HR Limit Set LOW HR Limit Turn Audible Zone Alarm ON/OFF Above your heart-rate zone. or Out-of Zone Indicators If your heart rate is out of your zone, the LO ( ) or HI ( ) arrow indicators will flash in the display. Zone Alarm ON Indicator If the zone alrm is ON, the watch will beep as your heart rate moves out of your zone. Below your heart-rate zone.

Follow steps through to switch your views. Customizing Primary Display 4 EXIT 3 sec Scroll to RUN mode Scroll to TOTAL/LAP Examples TOTAL time in primary display or Lap time in primary display

When activated MY VIEW will appear as the first view in RUN mode. This feature allows you to choose which information appears in the Primary (larger) and the Secondary (smaller) displays. Follow steps through to create your view. Setting “My View” Display 4 EXIT 3 sec Scroll to RUN mode Press button to scroll to MY VIEW and select display choice. Turn MY VIEW ON/OFF PRIMARY display choices SECONDARY display choices Note: Your primary display choice will not show up in the secondary list of choices. NO display

individual segments as a timed interval or a threshold recovery heart rate. As each segment is complete, as either a set time or specified heart rate; the next segment begins. All segments will continue to repeat until the timer is stopped. Follow steps through to set your training intervals. Setting Training Intervals 4 EXIT 3 sec Scroll to INTR mode Press button to select adjustable element. Segment 1 as timed interval Segment 1 Set seconds Segment 1 Set Minutes Segment 1 Set Hours Switch to Segment 2... 3...4...5 Segment 1 as threshold recovery heart rate Setting Threshold This number acts as a recovery heart rate. The segment will not work if your recent heart rate is less than the set value. Cycle Segments Press button to select beginning segment. Timer must be reset. See Reset Timer. Start Timer 2 sec Stop Timer Switch to Segment 2... 3...4...5 Reset Timer or Note: You do not have to set all the segments. For example, if you only want to use 2 of the segments, set segments 3, 4 and 5 as zero timed intervals (00:00’00”). A zero timed segment will not be active when the timer is started. Note: Press the VIEW button to switch views during an active training interval session. 3 sec Save Intervals to DATA mode

100 laps each. See page 7 for saving runs to DATA mode. Total time and segment data completed in INTERVAL mode will also be available for review in DATA mode. Follow steps through to view data saved for each run. Review Saved Runs 4 Scroll to DATA mode Select a Run or Interval Workout Press button to view stats in each category. Total Time Averages (not available on intervals) HR Zone (not available on intervals) Best Lap (not available on intervals) Lap 1 or Segment 1 Lap 2 or Segment 2 Up to 100 laps or 5 segments Average HR Average Lap Above Zone Below Zone In Zone HR Zones will not appear if they are turned OFF during recording. Total Time Average HR Lap 1 Time Total Time (Lap 1 + Lap 2) Average HR Lap 2 Time 3 sec Clear This Run 5 sec Clear ALL Runs

This is another way to gauge your approximate heart rate zones based on sex, age and weight. Starting with your Max Heart Rate, use the chart to help calculate your zones depending on the intensity of your workout. Note this formula may not work for everyone. 205 bpm 200 195 190 185 180 175 170 165 160 155 150 123 - 143 bpm 120 - 139 117 - 136 114 - 132 111 - 129 108 - 125 105 - 122 102 - 118 99 - 115 96 - 111 93 - 108 90 - 104 144 - 163 bpm 140 - 159 137 - 155 133 - 151 130 - 147 126 - 143 123 - 139 119 - 135 116 - 131 112 - 127 109 - 123 105 - 119 164 - 184 bpm 160 - 179 156 - 175 152 - 170 148 - 166 144 - 161 140 - 157 136 - 152 132 - 148 128 - 143 124 - 139 120 - 134 184 - 205 bpm 180 - 200 176 - 195 171 - 190 167 - 185 162 - 180 158 - 175 153 - 170 149 - 165 144 - 160 125 - 155 121 - 150 Find your Max Heart Rate Determine your Target Heart Rate Zones (Intensities) 210 - (0.7 x age) Light Intensity (60-70% of Max HR) Exercise in this range at the start of a workout or to recover from a tough workout or race. You should be able to easily maintain a conversation while exercising at this intensity. Moderate Intensity (70-80% of Max HR) Exercise in this range to develop endurance and prepare your muscles to make the transition from aerobic to anaerobic. You should be able to maintain this for a while. You should not be completely breathless and this should not hurt. Heavy Intensity (80-90% of Max HR) Exercise in this range to increase muscle strength and improve your anaerobic threshold. This is uncomfortable. You should be breathing very heavily. You should only be able to sustain this for a brief time. Maximum Intensity (90-100% of Max HR) Exercise in this range to increase mental toughness, Max V02 and tolerance to lactic acid. This is very uncomfortable. You can barely sustain it. You should be completely breathless. Do not exercise at this intensity except on the advice of a trained medical professional. Max Heart Rate

each end, making sure to touch the sensors on the back side of the transmitter. There is no ON/OFF switch for the transmitter. It sends a digital signal during the first 10 seconds of connection with the sensors. NOTE: If you are unable to enter HRM LINK OK screen before the 10 seconds expires, wait two minutes for the HR transmitter to automatically turn off and try again. After a few seconds the watch should display HRM LINK OK. The watch has located the digital ID of the HR transmitter and will store the ID until you either change the watch battery or reset the watch. 14 Linking the HR Transmitter to the Watch The HR transmitter has a unique digital ID to avoid crosstalk with other transmitters. Before your transmitter can communicate properly, the watch must be linked to the HR transmitter to establish and share this ID. The original transmitter which came with the watch was linked at the factory. Once linked, the digital ID of your HR transmitter is stored by the watch until you change the watch battery or reset the watch. Follow steps through to re-link the original or any replacement transmitters to the watch. 2 Scroll to RUN or INTR mode 3 4 Press and hold all four side buttons simultaneously until the watch beeps and all segments of the watch LCD flash in the display SENSORS

The grooved sensors may not be wet enough. Wet and try again. It is recommended that you wear the Heart Rate Transmitter directly against your skin. If you are wearing the HR Transmitter over clothing, try getting the clothing wet also. The HR Transmitter may not be positioned correctly. Make sure the grooved sensors are flat against the skin. Heart rate reading on watch is erratic or stops: You may need to replace the battery in the HR Transmitter. Sources of electromagnetic fields like appliances, computers and power lines can cause interference. Change your location. This product complies with EN60601-1-2 Watch display is frozen: The display of your watch may "freeze" due to static electricity or recent battery replacement. If this occurs, press and hold all four buttons at the same time. This will erase the data in the memory and allow you to reset the watch to the factory settings. Watch beeps continuously: If you have the zone alarm on and your heart rate does not fall within any of your zones, the watch will beep to indicate you are out of your zones. See page 8 for instructions on how to turn off the zone alarm. Specifications Watch Water Resistant up to 50 Meters: Designed for underwater performance to a depth of 165 feet (50 m). ATTENTION: Water damage will occur if watch buttons are pressed while underwater! Operating Temperature: -5 to 50˚ Celsius Material Specifications: Crystal: Mineral Glass Case: Polycarbonate Buckle: Stainless Steel Bezel: Stainless Steel Caseback: Stainless Steel Strap: Polyurethane Mode Limits: Chronograph: 23:59’59” Heart Rate: 30 - 240 bpm Timer: 23:59’59” HR Transmitter Water Resistant up to 30 Meters: Wipe dry after use. Do not store among conductive material. Operating Temperature: -5 to 50˚ Celsius Accuracy: +- 1% or +- 1% bpm, whichever larger (steady state) Material Specifications: Case: Polycarbonate Strap: Urethane Band: Elastic Press and hold all four buttons at the same time to reset the watch to the factory settings.

WARNING! Batteries contain chemical substances. They should be disposed of properly according to local regulations. Watch Battery Type: CR2032 3V Lithium Battery Life: The battery is estimated to last 1.5 years depending on frequency and use of certain features. Activating the Electrolite feature will contribute to battery drain. Utilizing the Power Save function will help conserve battery life. Battery Replacement: Follow steps below to replace your watch battery. For best results, you can have Nike’s authorized service center change the watch battery. HR Transmitter Battery Type: CR2032 3V Lithium Battery Life: The battery is estimated to last 1 year if HR Transmitter is used one hour per day. Using a coin, unscrew the battery hatch on the watch by turning counter-clockwise. Twist and remove battery holder cover. Remove old battery. Insert a CR2032, 3V lithium battery with the writing facing you. Do not touch the 2 contacts. Replace the battery holder cover and battery hatch. Using a coin, unscrew the battery hatch by turning it counter-clockwise. Insert a CR2032 3V lithium battery with the writing facing you. Do not touch the 2 contacts. Replace the battery lid.

Your NIKE watch is warranted to be free of defects in materials or workmanship,under normal use, for a period of two years from the date of delivery. This limited warranty excludes the battery, crystal, strap, or damage resulting from improper care or handling, accidents, modification, unauthorized repairs or normal wear. Return the defective watch and the store receipt to the place of purchase. If there is a covered defect, you have the option to have the defective parts or watch repaired or replaced with the same product (if available) or a similar product of equal price. However, NIKE reserves the right to refuse either repair or replacement (but not both) if the cost of doing so would be disproportionate to the defect. This limited warranty is in place of all other express warranties, and excludes refund of the purchase price. Any implied warranties, including merchantability and fitness for a particular purpose, are limited to the duration of this limited warranty. In no event shall NIKE be liable for direct, indirect, incidental or consequential damages arising out of the use of the watch, and any recovery is limited to the purchase price. No other person or company is authorized to change this limited warranty, and your dealer is solely responsible for any other warranties. For U.S. Purchasers: Some states do not allow limitations on how long an implied warranty lasts, or exclusions of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. The foregoing is without prejudice to other legal rights that may arise under applicable national legislation. For non-warranty service like battery or strap replacement, contact one of the listed service centers. FCC and RSS-210 Compliance This device complies with part 15 of the FCC and RSS-210 of the IC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference that may cause undesired operation of the device. Tested to comply with FCC standards. For home or office use. FCC WARNING: Changes or modifications not expressly approved by Nike could void your authority to operate this device under FCC regulations.