Nikon COOLPIX L820 Reference Manual

and hints about using the camera. Shooting Using Easy Panorama (Shooting and Playback) ................................. _2 Playback Viewing and Deleting Images Captured Continuously (Sequence) ... _6 Editing Still Images ....................................................................................... 8"_9 Editing Movies .............................................................................................. _ 19 Connecting the Camera to a TV (Viewing Images on a TV) .......... _21 Connecting the Camera to a Printer (Direct Print) .......................... _23 Menu The Shooting Menu (for I_1 (Auto) Mode) ......................................... _31 The Smart Portrait Menu ........................................................................... _40 The Playback Menu ..................................................................................... _42 The Movie Menu .......................................................................................... _53 The Setup Menu ........................................................................................... _59 Additional Information File and Folder Names ............................................................................... _83 Optional Accessories .................................................................................. _85 Error Messages ............................................................................................. _86

last scene selected is displayed, 1 Select Normal (180 °} or Wide (360 °} as the ....... shooting range, and then press the _) button. / / • When the camera is readied in the horizontal position, the _ I image size (width x height) is as follows: l 1 Normal (180°): 4800 x 920 when moved horizontally, 1536 x 4800 when moved vertically Wide (360°}: 9600 x 920 when moved horizontally, 1536 x 9600 when moved vertically When the camera is readied in the vertical position, the direction and the width and height are switched, 2 Frame the first edge of the panorama scene, and then press the shutter-release button halfway to focus. • The zoom is fixed at the wide angle position, • A grid is displayed in the monitor. • The camera focuses on the subject in the center of the frame, • Exposure compensation (_ 61) can be set. • If the focus and exposure are not correct, try using focus lock (_ 70), _'62

movement, shooting ends. Example of camera movement Guide • Stand in place and move the camera horizontally or vertically in an arc so that the guide travels from one edge to the other. • Shooting stops if the guide does not reach the edge within about 15 seconds (when Normal (180 °) isselected) or within about 30 seconds (when Wide (360 °) is selected) after shooting starts. 4" R te t_ _3

seen in the saved image is narrower than that seen in the monitor at the time of shooting, • if the camera is moved too quickly or shaken too much, or if the sub]ect is too uniform (e,g, walls or darkness), an error may occur. • if shooting is stopped before the camera reaches the halPway point in the panorama range, a panorama image is not saved, • if more than half of the panorama range is captured but shooting ends before reaching the edge of the range, the range not captured is recorded and displayed in gray. m o _,4

30), display an image captured using easy panorama in full-frame playback mode, and then press the _) button to display the short edge of the image using the entire monitor and automatically move (scroll) the displayed area. • The image scrolls in the direction that was used when shooting. Playback controls are displayed at the top of the monitor during playback. Press the multi selector • or • to choose a control, and then press the _) button to perform the following operations. Function Icon i Description ,,,,,,,,, Rewind Hold down the _) button to scroll backward quickly, Advance _ Hok] down the _) butto_ t_ scroll forward quickly_ The following operations can be performed while playback ispaused using the controls displayed at the top in the monitor. Pause _i!?11 _Holddownthe_)buttontorewind. Hold down the _) button to scroll. Resumesautomatic scrolling. End m Switches to full frame playback mode. S" R te t_ _1_ Notes About Easy Panorama Scroll Playback Thiscamera may not be able to scroll or zoom when viewing easy panorama images captured with another make or model of digital camera.

Each series of images captured using tile following settings is saved in a sequence. • Scene mode (_ 37) • _ (auto) mode (_ 52) Sports - Continuous H Pet portrait (when Continuous is selected) - Continuous L - Continuous H:]2Ofps - Continuous H: 60 fps By default, only the first image of a sequence (key picture) is displayed to represent the images in the sequence in full- frame playback mode ([_] 30) or thumbnail playback mode (I]]3 75). • When only the key picture is displayed for a sequence, the picture cannot be zoomed in on. When only the key picture is displayed for a sequence, press the _) button to display each image in a sequence individually. • To display the previous or next image, press the multi selector • or I_. • To return _okey picture only display, pressthe multi sdector A • When displaying images individually, thumbnails are not displayed. To display images in a sequence as thumbnails, set Sequence display options to Individual pictures in the playback menu (_52). _6

menu to set all sequences to be displayed using their key pictures or to display them as individual images • If only one image is captured when using Continuous the image is not displayed as a sequence • images captured continuously with another make or model of digital camera cannot be displayed as a sequence [] Changing Key Picture in Sequence A sequence's key picture can be changed using Choose key picture (6_52) in the playback menu, [] Playback Menu Options Available When Using Sequence When the MENUbutton is pressed the _llowing menu operations are available _r the images in that sequence • Quick retouch 1 * _'_11 • Skin softening 1 * _13 • Printorder 2 * _'B42 • Protect 2 * _46 • Small picture ] * _16 • Sequence display options * _52 D Lighting ] * _12 Filter effects 1 * _ 14 Slide show * _45 Rotate image 1 * _49 Copy 2 * _50 Choose key picture * _'BS2 1 This operation is not available when only a key picture is displayed Display the images in the sequence individually and then press the MENUbutton $" 2 If the MENUbutton is pressed when only a key picture displayed, the same settings can be applied to all images in that sequence Press the MENU button after displaying individual images to apply settings to each displayed image 6 _7

picture only, imagesto be deletedvaryasdescribedbelow.Todisplaythe screenfor selectingthe deletion method, pressthe "_ button. • If only keypicturesare displayedfor sequenceswhen the _ button ispressed: Current image: When a key picture isselected,all imagesinthat sequencearedeleted. Eraseselected images:Whena keypicture isselectedinthe eraseselectedimages screen(_ 33),allpictures in the sequencearedeleted. All images: All imagesaredeleted, including the sequencerepresentedby the currently displayed key picture. • If the _) button hasbeen pressedand eachindividual imagein the sequenceisdisplayed before pressingthe "_ button: Deletion methods change asfollows. Current image:The imagecurrently displayed isdeleted. Eraseselected images: When multiple imagesin the sequenceareselectedinthe eraseselectedimagesscreen(_ 33),the selectedimagesaredeleted. Entire sequence:All imagesin the sequence,including the imagecurrently displayed, aredeleted. B" 8 m o _,8

features to edit your images. Edited images are saved as separate files (_83), Editing function Description Allows you to easily create retouched copies in which contrast and Quick retouch (_ 11) saturation have been enhanced. Allows you to create a copy of the current image with enhanced D-Lighting (_12) brightness and contrast, brightening dark portions of the image, Skin softening (_ 13) Allows you to make the skin tones in people's faces smoother, Digital filter effects are available to apply a variety of effects to images. Filter effects (_14) Effect types include Soft, Selective color, Cross screen, Fisheye, Miniature effect, Painting, and Toy camera effect, Small picture (_16) Allows you to create a small copy of images suitable for use as e mail attachments. Crop (_ 17) Allows you to crop a portion of the image. Use to zoom in on a subiect or arrange a composition. _9

cannot edit images captured with another make or model of digital camera, • Images captured using Easy panorama (_ 43) or 3D photography (_ 45) cannot be edited, • If no people's faces are detected in an image, a copy cannot be created using the skin softening fu nction (_ 13), • When using another make or model of digital camera, images edited with this camera may not be displayed properly and may not be able to be transferred to a computer, • Editing functions are not available when there is not enough free space in the internal memory or on the memory card. • To edit an individual image in a sequence of images (_6) when only the key picture is displayed, perform one of the following procedures: Press the _) button to display a sequence of images as individual images and select an image in the sequence. Set Sequence display options (_52) in the playback menu to Individual pictures to display them as individual images and select an image. [] Restrictions on Image Editing When an edited copy is further modified with another editing function, check the following restrictions, Editing function used Editing functions that can be added Quick retouch The skin softening, small picture, or crop function can be used, D-Lighting The quick retouch, D Lighting, and filter effects functions cannot be Filter effects used together, Skin softening The quick retouch, D Lighting, filter effects, small picture, or crop function can be used. Small picture Another editing function cannot be added, Crop • Copies created with editin_ functions cannot be further edited with the same function used to create them, • When combining the small picture or crop function and another editing function, use the small picture and crop functions after other editing functions have been applied, • You can apply skin softening to images that were captured using skin softening (_'_40), _I0

if the original images are deleted, The original images are not deleted if copies created with editing functions are deleted. • Edited copies are saved with the same shooting date and time as the original. • Print order (_'_42) and protect settings (_'_46) do not remain effective in edited copies. Quick Retouch: Enhancing Contrast and Saturation Press the [] button mode) -) MENU button ") Quick retouch ") (_) button (playback Press the multi selector • or • to select the amount of effect applied and then press the I_) button. • The original version is displayed on the left and an example of the edited version is displayed on the right, • To exit without saving the copy, press ", • Copies created with this feature are indicated by _s displayed during playback. [] More Information File and Folder Names , _'_83

brightness and contrast, brightening dark portions of the image. Press the multi selector • or • to select OK and then press the _) button. • The original version is displayed on the left and an example of the edited version is displayed on the right, • A new, edited copy is saved as a separate image, • Copies created with this feature are indicated by _ displayed during playback. $,, p_ m o [] More Information File and Folder Names * _'_83 _12

1 Press the multi selector • or • to select the degree of softening and then press the I_) button. • The confirmation dialog is displayed with the face to which the effect was applied enlarged in the center of the monitor, • To exit without saving the copy, press •, 2 Check the preview of the copy and then press the I_) button. • Skin tones of up to 12 faces, in the order of that closest to the center of the frame, are softened, • If more than one face was processed, press • or • to display a different face. • Press the MENUbutton to adjust the degree of softening, The monitor display returns to that shown in step 1, • Edited copies are saved as separate images, and _ is displayed when you play them back, _1_ Notes About Skin Softening Depending upon the direction in which faces are looking, or the brightness of faces, the camera may be unable to accurately detect faces, or the skin softening function may not perform as expected, [] More Information File and Folder Names , _'_83 _-B13

the image by adding a slight blur around the Soft center of the image. In images captured using face detection (_ 68) or pet detection (_ 44), areas around faces are blurred. Selective color Allows you to keep one specified color in the image, and change the other colors to black and white. Allows you to produce star like rays of light that radiate outward from Cross screen brig ht objects such as sunlight reflections or street Iights. This effect is suitable for night scenes. Allows you to make an image look as if it were captured with a Fisheye fisheye lens. This effect is well suited for images captured in macro mode. Allows you to make an image look like a miniature scene captured in Miniature effect macro mode. This effect is well suited for images captured from a high vantage point with the main subject at the center of the image. Painting Allows you to give images a hand painted appearance. Toy camera effect Allows you to decrease the color saturation of the entire image and darkens the image periphery, 1 Press the multi selector • or • to select the filter effect type and then press the _) button, • When Cross screen, Fisheye, Miniature effect, Painting, or Toy camera effect is selected, proceed to step 3. 6"_14

• When using Soft: Press • or • to select the range of the effect, • When using Selective color: Press • or • to select the color to be retained, • Press • to return to the Filter effects selection screen without making any changes. Example: Soft 3 Confirm the effect and then press the I_) button. • A new, edited copy is created, • To exit without saving the copy, press •, • Copies created with this feature are indicated by © displayed during playback, [] More Information File and Folder Names , _'_83

Press the [] button mode) _ MENU button _ Small _ _) button (playback picture You can create a small copy of the current image. 1 Press the multi selector • or • to select the desired copy size and then press the button. • For images captured at an Image mode (_31) setting of 4608x2592, only 640x360 is displayed. 2 Select Yes and then press the _ button. • A new, edited copy is saved as a separate image with a compression ratio of 1:16. m o • Copies created with this feature are smaller than other images when displayed during playback, and are indicated bye. [] More Information File and Folder Names * _83

control to T (o_)in full-frame 1" playback mode ([_ 30) to zoom in on the image. • Tocropan image displayed in "tall" (portrait)orientation, zoom in on the image until the black bars displayed on the both sides of the monitor disappear. The cropped image is displayed in landscape orientation. To crop the image in its current "tall" (portrait) orientation, first use the Rotate image option (_49) to rotate the image so that it is displayed in landscape orientation. Next, enlarge the image for cropping, crop the image, and then rotate the cropped image back to "tall" (portrait) orientation. 2 Refine copy composition. • Rotate the zoom control to T (0_) or W ([]) to adjust the zoom ratio. • Press the multi selector A V, • or _ to scroll the image so that only the portion to be copied is visible in the monitor, 3 Pressthe MENUbutton. 4 Use the multi selector to select Yes and then press the _) button. • A new, cropped copy is saved as a separate image. • Copies created with this feature are indicated by displayed during playback. t_ _17

• Images cropped to an image sizeof 320 x 240 or 160 x 120 are smaller than other images when displayed during playback. [] More Information File and Folder Names , _'_83 p_ m o _18

movie can be saved as a separate flee (except movies recorded using ,_-_ iFrame 540/30p; _53). 1 Play back the desired movie and pause playback (1_[_]93). 2 Press the multi selector _ or i_ to select the , _ Ilk_l control, and then press the I_) button. • The movie edit screen is displayed, 1 3 Press • or • to select the _t control (choose start point). • When you start editing a movie, the frame displayed when the movie was paused is the start point of the edit, • Press • or • to move the start point to the beginning of the desired portion of the movie. • To cancel editing, press • or • to select _ (return), and then press the _) button, 4" Press • or • to select _ (choose end point). • Press • or • to move the end point on the right edge to the end of the desired portion of the movie. • Select [-_"1(preview) and then press the _) button to pby back the specified portion of the movie that will be saved, While the preview is playing, rotate the zoom control to adjust the volume. While the preview is playing back, press the _) button again to stop playback.

are finished, press • or • to select _ Save and then press the I_) button. o _1_ Notes About Movie Editing • A movie that was created by editing cannot be trimmed again. To trim another area of the movie, select and edit the original movie. • Movies are trimmed in one second intervals; therefore, the actual trimmed portion of the movie may differ slightly from the selected start and end points. Movies cannot be trimmed so that they are less than two seconds long. • Editing functions are not available when there is not enough free space in the internal memory or on the memory card. [] More Information File and Folder Names * _'_83

If your TV is equipped with an HDMI jack, a commercially available HDMI cable can be used to connect the camera to tile TV. 1 Turn offthe camera. 2 Connect the camera to the-IV. When using the included audio/video cable Connect the yellow plug to the video in lack and the white and red plugs to the audio in lacks on the TV, When using a commercially available HDMI cable Connect the plug to the HDMIiack on the TV. l i'ii y V To HDMI jack HDMI micro connector (Type D) 8"62/ rb

to external video input. • See your TV's documentation for details. m rD 6" Off. _1_ Notes About Connecting the HDMI Cable An HDM[ cable is not included. Use a commercially available HDM[ cable to connect the camera to a TV. The output terminal on this camera is an HDM[ micro connector _ype D). When purchasing an HDM[ cable, be sure that one end of the cable is an HDM[ micro connector. _1_ Notes About Connecting the Cable • When connecting the cable, be sure that the camera connector is properly oriented, do not insert the cable at an angle, and do not use excessive force. When disconnecting the cable, do not pu[[ the connector at an angle. • Do not connect cables to the HDM[ micro connector and to the USB/audio/video output connector simultaneously. _1_ If the Images Are Not Displayed on the TV Be sure that the camera's TV settings (_74) in the setup menu matches the standard used by your TV. [] Using a TV Remote Control (HDMI Device Control) The remote control of an HDMI CEC compatible TV can be used to control playback. It can be used instead of the camera's multi selector and zoom control to select images, start and pause movie playback, switch between fuji screen playback mode and 4 image thumbnail playback mode, etc. • Set the HDMI device control setting (_74) in TV settings to On (default setting) and then connect the camera and TV using an HDM[ cable. • Aim the remote control at the TV when operating it. • Refer to the TV's operating instructions for information about the TV's HDM[ CEC compatibility. 6"_22

(_:'21) printers can connect the camera directly to the printer and print images without using a computer. Follow the procedures below to print images. Connect to the pdnter (_2@ _magesone ate time 1 (_26) J Pdat multiple irnages (_'_28) (when printing is Complete: turn the Camera Off and disc°nnect the USB 5" _23

use batteries with a sufficient amount of charge remaining to prevent the camera from turning off unexpectedly. • You can use the AC Adapter EH 67 (available separately) to power the camera from an electrical outlet. Do not use any other make or model of AC adapter as it may cause the camera to heat up or malfunction. [] Printing Images In addition to printing images transferred to a computer from your personal printer and printing over a direct camera to printer connection, the _llowing options are also available _r printing images saved on the memory card: • Inserting the memory card into a DPOF compatible printer's card slot • Taking the memory card to a digital photo lab When using these methods to print, you can use the Print order option in the playback menu to speci_ which images will be printed and how many copies of each image will be printed, and save these settings on the memory card (_42). Connecting the Camera to a Printer 1 Turn offthe camera. 2 Turn on the printer. • Check printer settings, _24

using the included USB cable. • Be sure that connectors are properly oriented, do not insert the cable at an angle, and do not use excessive force. When disconnecting the cable, do not remove the cable at an angle, 4 Turn on the camera. • When properly connected, the PictBridge startup screen is displayed in the camera monitor, followed by the Print selection screen. /!/ R r_ _25

below to print an image. 1 Use the multi selector to select the desired image and then press the _) button, • To make it easier to select images, rotate the zoom control to W (_;;_) to switch to 6 image thumbnail playback mode, Rotate the zoom control to T (c_) to switch to full frame playback mode. 2 Select Copies and then press the _) button. ¢D m o 3 Press • or • to select the desired number of copies (up to nine) and then press the _) button. _26

press the _) button. 5 Select the desired paper size and then press the _ button. • To specify paper size using settings on the printer, select Default in the paper size option. 6 Select Start print and then press the _) button. 7 Printing begins. • Monitor display returns to the print selection screen shown in step 1 when printing is complete, Current number of copies/ total number of copies _'_ 2 7

below to print multiple images. 1 When the Print selection screen is displayed, press the MENUbutton. 2 Use the multi selector to select Paper size and then press the _) button. • To exit the print menu, press the MENUbutton, $- 2 rD m o 3 Select the desired paper size and then press the _) button. • To specify paper size using settings on the printer, select Default in the paper size option. 4 Select Print selection, Print all images, or DPOF printing and then press the _) button. _28

(up to 99) and how many copies of each image will be printed (up to nine). • Press the multi selector • or I_ to select images, and then press • or • to set the number of copies for each. • _ and the numeral indicating the number of copies to be printed are displayed under images selected for printing, If no copies have been specified for an image, the selection is canceled, • Rotate the zoom control to T (% to switch to full frame playback mode. Rotate the zoom control to W (_i_) to switch to 6 image thumbnail playback mode. • Press the _) button when setting is complete, • When the screen shown on the right is displayed, select Start print and then press the _ button to start printing. Select Cancel and then press the _ button to return to the print menu. Print all images One copy of each image saved in the internal memory, or on the memory card, is printed, • When the screen shown on the right is displayed, select Start print and then press the _) button to start printing. Select Cancel and then press the _) button to return to the print menu. _29

on the right is displayed, select Start print and then press the _) button to start printing. Select Cancel and then press the _) button to return to the print menu. • To view the current print order, select View images and then press the _) button, To print images, press the _) button again, $- p_ m o S Printing begins. • Monitor display returns to the print menu shown in step 2 when printing is complete. Current number of copies/ total number of copies [] Paper Size The camera supports the following paper sizes: Default (the default paper size for the printer connected to the ca mera), 3.5x5 in., 5x7 in., 100x150 mm, 4x6 in., 8x10 in., Letter, A3, and A4, Only sizes supported by the printer are displayed. _-B30

Enter shooting mode -> MENUbutton -> Shooting menu -> Image mode -) _) button You can select the combination of image size and image quality (i.e., image compression ratio) that is used when saving images. The higher the image mode setting, the larger the size at which images can be printed, and the lower the compression ratio, the higher the quality of the images, but the number of Option I l Aspect ratio Print size2 (cm/in.) _* 4608x3456_I1_ 4:3 39 X 29/I 5 X 11.5 4608x3456 (default setting) 4:3 39 x 29/15 x 11.5 1_1 3264x2448 4:3 28 × 21/11 x 8 [] 2272xl 704 4:3 19 x 14/7.5 x 5,6 [] 1600x 1200 4:3 13 x 10/5,3 x 4 [] 640x480 4:3 5 x 4/2 × 1,5 4608x2592 16:9 39 x 22/15 x 8.5 images that can be saved (_'_32) is reduced, Compression ratio Appro×, 1:4 Appro×, 1:8 Approx, 1:8 Approx, 1:8 Approx, 1:8 Approx, 1:8 Approx, 1:8 1 The total number of pixels captured, and the number of pixels captured horizontally and vertically. Example: i_ 4608x3456 approx, 16 megapixels, 4608 x 3456 pixels 2 Print size at an output resolution of 300 dpk Print sizes are calculated by dividing the number of pixels by printer resolution (dpi) and multiplying by 2,54 cm (1 in,). However, at the same image size, images printed at higher resolutions will be printed smaller than the size indicated, and those printed at lower resolutions will be printed larger than the size indicated, 8 t_ _31

to other shooting modes. • Some settings cannot be used with other functions (_ 66). • Image mode cannot be selected when using Easy panorama (_ 43) or 3D photography (_ 4S) in scene mode. [] Number of Images That Can Be Saved The following table lists the approximate number of images that can be saved on a 4 GB memory card. Note that due to JPEG compression, the number of images that can be saved varies greatly depending on the composition of the image, even when memory capacity and image mode settings remain constant. The number of images that can be saved may also vary depending on the type of memory card being used. Image mode Number of images that can be Saved (4 GB) I_* 4608x3456_11_ 490 F_ 4608x3456 (default setting) 970 3264x2448 1910 [] 2272x1704 3370 [] 1600xi 200 71 O0 [] 640x480 24100 [] 4608x2592 1290 • If the number of exposures remaining is 10,000 or more, the number of exposures remaining display shows "9999", • To confirm the number of images that can be saved in the internal memory (appro×, 65 MB), remove the memory card from the camera, and then check the number of remaining exposures displayed in the monitor when shooting. _'632

Tile color of %ht reflected from an object varies with the color of the light source. Tile human brain is able to adapt to changes in the color of the light source, with the result that white objects appear white whether seen in the shade, direct sunlight, or under incandescent lighting. Digital cameras can mimic this adjustment by processing images according to the color of the light source. This is known as "white balance." For natural colors, select a white balance setting that matches the light source before shooting. Although Auto (the default setting) can be used under most types of lighting, white balance can be adjusted to suit the sky conditions or light source and achieve more natural color tones in the image. Description White balance isautomatically adjusted to suit lighting conditions. Usewhen shooting under unusual lighting (_34). Usewhen shooting outdoors in direct sunlight, Usewhen shooting under incandescent lighting. Usewhen shooting under fluorescent lighting. Usewhen shooting under overcast skies, Usewhen shooting with the flash. The icon for the current setting is displayed in the monitor when the camera is in shooting mode (_]] 8). No icon is displayed when Auto is selected. S" _33

unusual lighting or to compensate for light sources with a strong color cast when the desired effect has not been achieved with white balance settings like Auto and Incandescent (for example, to make images shot under a lamp with a red shade look as though they had been shot under white light). Use the procedure below to measure the white balance value under the lighting used when shooting. 1 Prepare a white or gray-colored subject and then place it under the lighting that will be used when shooting. 2 Display the shooting menu ([_ 65), use the multi selector to select PREPreset manual in the White balance menu, and then press the I_) button. • The camera zooms in to the position for measuring white balance, 3 Select Measure. • To apply the most recently measured white balance value, select Cancel and then press the _) button. The white balance setting is not measured again and the most recently measured value is set, _34

object in the measuring window. Measuring window 5 Press the _) button to measure a value for preset manual. • The shutter is released and the new white balance value is set, No image is saved. w Notes About White Balance • Some settings cannot be used with other functions (_ 66). • When white balance is set to any setting other than Auto and Flash, lower the flash (_ S). _1_ Notes About Preset Manual A value for flash lighting cannot be measured with Preset manual, When shooting using the flash, set White balance to Auto or Flash.

shot selector). _pt_"_ aescr ipti on_ [] Single One picture is taken each time the shutter release button is pressed. (default setting) While the shutter release button is held all the way down, images are captured continuously at a rate of about 8 fps (when image mode is set to Continuous H _ 4608x3456), Shooting ends when the shutter release button is released, or six images have been captured. While the shutter release button is held all the way down, up to 38 images are captured continuously at a rate of about 2.1 fps (when Image mode is Continuous L set to _ 4608x3456), Shooting ends when the shutter release button is released. __1|2[} Continuous H: Each time the shutter release button is pressed all the way, 50 frames are 120 fps captured at a speed of about 1/120 s or faster. Image mode is fixed at [] (image size: 640 × 480 pixels). D_il60 Continuous H: Each time the shutter release button is pressed all the way, 25 frames are captured at a speed of about 1/60 s or faster. 60 fps Image mode is fixed at [] (image size: 1280 x 960 pixels). The "best shot selector" is recommended when shooting with the flash off or the camera zoomed in, or in other situations in which inadvertent motion can result in blurred images. When BSS is on, the camera captures BSS BSS up to 10 images while the shutter release button is held down. The (best shot selector) sharpest image in the series is automatically selected and saved. BS$ is best suited to shooting subjects that are not moving. When shooting moving subjects or when the composition of the picture changes while shooting, the desired results may not be achieved. _36

of about 30 fps and arranges them in a single _1 Multi-shot 16 image. images are captured with the Image mode fixed at _ (image size is 2560 x 1920 pixels), Digital zoom cannot be used, The icon for the current setting is displayed in the monitor when the camera is in shooting mode ([]_ 8). No icon is displayed when Single is selected. _1_ Notes About Continuous Shooting • When a setting other than Single is selected, flash cannot be used, Focus, exposure, and white balance are fixed at the values determined with the first image in each series, • it may take some time to save the images after shooting, The amount of time it takes to finish saving the images depends on the number of images, image mode, the write speed of the memory card, etc, • When ISO sensitivity increases, noise may appear in captured images, • The frame rate with continuous shooting may vary depending upon the current image mode setting, the memory card used, or shooting condition. • When Continuous is set to Continuous H: 120 fps, Continuous H: 60 fps, or Multi-shot 16, banding or variance in brightness or hue may occur in images that were captured under lighting that flickers at high speeds, such as fluorescent, mercury vapor, or sodium vapor lghting. • When iSO sensitivity is 1600 or 3200, the rate at which images are captured continuously may decrease. • Some settings cannot be used with other functions (_ 66). [] Images Captured Using Continuous Shooting Each series of images captured is saved as a "sequence" (_'_6). R te t_ _'_37

With Continuous Shooting You can use the self timer when shooting using Continuous to reduce the effects of camera shake (_ SS). [] More Information • Subjects NotSuRableforAutofocus * _ 71 • Viewing and Deleting images Captured Continuously (Sequence) * _'_6 8 m 6" ISO Sensitivity Enter _ (auto) mode -> MENUbutton -> ISO -) _) button sensitivity When ISOsensitivity is increased, less light is needed when taking pictures. Higher ISO sensitivity allows darker subjects to be captured. Additionally, even with subjects of similar brightness, pictures can be taken at faster shutter speeds, and blurring caused by camera shake and subject movement can be reduced. • Although higher ISOsensitivity is effective when shooting darker subjects, shooting without the flash, shooting while using the zoom, etc., images may contain noise. The icon for the current setting is displayed in the monitor when the camera is in shooting mode ([_) 8). • When Auto is selected, []_ is not displayed at ISO 125, but is displayed if the ISO sensitivity automatically increases to more than 125. _38

66). • When the ISOsensitivity isset to any setting other than Auto, Motion detection (_68) is disabled. Color Options Enter _ (auto) mode -> MENU button -> Color -) _) button options You can adjust the colors when images are saved. Option Description Standard color Use to achieve natural colors in your images, (default setting) _._VI Vivid color Use to achieve vivid colors in your images, -'_z_BWBlack-and-white Use to save images in black and white, _SE Sepia Use to save images in sepia tones. C Cyanotype Use to save images in cyan blue monochrome. The icon for the current setting is displayed in the monitor when the camera is in shooting mode ([_) 8). When Standard color is selected, no icon is displayed. Color tones shown in the monitor when shooting change according to the selected color option. 4" R te t_ 5" _1_ Notes About Color Options Some settings cannot be used with other functions (_ 66), _39

for information about Image mode. Skin Softening Enter smart mode -) MENUbutton -) Skin -) _) button portrait softening You carl change skin softening settings. # rD s m o The icon for the current setting is displayed in the monitor when the camera is in shooting mode ([]_] 8). No icon is displayed when Off is selected. The degree of skin softening effect cannot be confirmed on the subject on the shooting screen. Check the degree of skin softening performed in playback mode. _40

_) button portrait The camera detects people's faces and then automatically releases the shutter whenever a smile is detected. Option Description On (default setting) Enablesthe smile timer. Off Turns the smile timer off. The icon for the current setting is displayed in the monitor when the camera is in shooting mode ([_ 8). No icon is displayed when Off is selected. Blink Proof Enter smart mode -_ MENUbutton -_ Blink -_ _) button portrait proof The camera automatically releases the shutter twice each time a picture is taken. Of the two shots, the image in which the subject's eyes are more open compared to the other shot is saved. Option Description Enables blink proof. Flashcannot be used when On is selected, Ifthe camera saved an image in _On which the subject's eyes may have been closed, the dialog shown on the right isdisplayed for afew seconds. Off (default setting) Turns blink proof off, The icon for the current setting is displayed in the monitor when the camera is in shooting mode ([_ 8). No icon is displayed when Off is selected. _41

for information about image editing features. Print Order (Creating a DPOF Print Order) Press the [] button mode) -) MENUbutton ") Print order -') _) button (playback When printing images saved on the memory card using any of the following methods, the Print order option in the playback menu is used to create digital "print orders." • Inserting the memory card into a DPOF-compatible (_1"21) printer's card slot. • Taking the memory card to a digital photo lab. • Connecting the camera to a PictBridge-compatible (_721) printer (_'623). A print order can also be created for images saved in the internal memory if the memory card is removed from the camera. 1 Use the multi selector to select Select images and then press the _) button. _=_42

selector • or • to select images, and then press • or • to set the nu tuber of copies for each. • _ and the numeral indicating the number of copies to be printed are displayed under images selected for printing, If no copies have been specified for an image, the selection is canceled, • Rotate the zoom control to T (o) to switch to full frame playback mode, Rotate the zoom control to W (_;;_) to switch to 6 image thumbnail playback mode, • Press the _) button when setting is complete. 3 Select whether or not to print shooting date and shooting information. • Select Date and press the _) button to print the shooting date on all images in the print order, • Select Info and press the _) button to print shooting information (shutter speed and aperture value) on all images in the print order, • Select Done and press the _) button to corn plete the print order. Images selected for printing are indicated by _ during playback. _43

printing of shooting date and shooting information is used. • Shooting information cannot be printed when the camera is connected to a DPOF compatible printer via the included USB cable (_30). • Note that the Date and Info settings are reset each time the Print order option is displayed, • The date printed is that saved when the image was captured, Changing the camera's date using Date and time or Time zone .... in the Time zone and date option in the setup menu after an image has been captured has no effect on the date printed on the image. £ m rD o _1_ Notes About Print Order • Print orders cannot be created for images captured using 3D photography in scene mode. [] Canceling Existing Print Order Select Delete print order in step 1 (6"_42) of"Print Order (Creating a DPOF Print Order)" and press the _) button to remove print marking from all images and cancel the print order. ] Print Date When shooting date and time are imprinted on images using the Print date option (_65) in the setup menu, images are saved with shooting date and time imprinted on the image when they are captured. Images with the date imprinted on them can be printed from printers that do not support printing of the date on images, Only the date and time imprinted on images with the print date option will be printed, even if the Print order date option is enabled, _44

selector to select Start and then press the I_) button. • To repeat the slide show automatically, select Loop and then press the _) button before selecting Start, The check mark (V) is added to the loop option when enabled. 2 The slide show begins, • While the slide show is in progress, press the multi selector • or • to display the next image or • or • to display the previous image, Press and hold • or • to fast forward, or • or • to fast rewind. • To end or pause the slide show, press the _) button, 3 End the slide show or restart it. • The display at right appears when the last slide is displayed or the show is paused, Highlight [] and press _) to return to Step 1, or select [] to restart the show, 4" _45

of movies is displayed. • When Key picture only is selected as the method to display sequences (_'_6), only the key picture is displayed, • Images captured using easy panorama (_ 43, _'B2) are displayed full frame when played in a slide show. They do not scroll, • The maximum playback time is up to about 30 minutes even if Loop is enabled (_'B71), m m o Protect Press the [] button mode) -_ MENU button -_ Protect -_ _) button (playback You can protect selected images from accidental deletion. Select images to protect or cancel protection for previously protected images from tile image selection screen. '%he Image Selection Screen" (_47) Note that formatting tile camera's internal memory or the memory card permanently deletes protected files (_72). Protected images are indicated by [_] during playback (_ 11). _46

(_26, _29) Follow the procedures described below to select images. 1 Press the multi selector _ or i_ to select an image. • Rotate the zoom control (_ 2) to T (C() to switch to full frame playback mode or W (_;_) to switch to 6 thumbnail playback mode. • When selecting an image for Rotate image, Choose key picture, or Welcome screen, or when using the Print selection screen to print individual images, only one image can be selected, Proceed to step 3, 2 Press • or • to select or deselect (or to specify the number of copies), • When an image is selected, an icon is displayed under the image, Repeat steps 1 and 2 to select additional images, S" te _47

to apply image selection. • For some operations, such as when you have selected Copy > Selected images, a confirmation screen is displayed, Follow the instructions displayed in the monitor, p_ m o _48

in which still images are displayed. Still images can be rotated 90 degrees clockwise or 90 degrees counterclockwise. When you select an image you want to rotate in the image selection screen (_47), the Rotate image screen is displayed. You can then rotate the image 90 degrees by pressing the multi selector _1 or i_. Rotate 90 degrees Rotate 90 degrees counterclockwise clockwise When you press the _) button, the displayed orientation is applied, and the orientation information is saved with the image. _1_ Notes About Image Rotation • The camera cannot rotate images captured with another make or model of digital camera, or images captured with 3D photography (_ 45). • images captured in sequence cannot be rotated when only the key pictures are displayed for them, First display the images individually, and then rotate the desired image (_'_6). s" R te t_ _49

the internal memory and a memory card. i Use the multi selector to select a destination option to which images are copied and then press the I_) button. • Camera to card: Copies images from internal memory to memory card. • Card to camera; Copies images from memory card to internal memory. 2 Select a copy option and then press the I_) button. • Selected images: Copies images selected from the image selection screen (_47), • All images: Copies all images.

MPO files can be copied. • Operation is not guaranteed with images captured with another make of camera or that have been modified on a computer. • When copying images for which Print order (_'B42) options are enabled, the print order settings are not copied, However, when copying images for which Protect (_'B46) is enabled, the protect setting is copied, [] Copying Images in a Sequence • If you select a key picture of a sequence in Selected images when only the key picture is displayed for the sequence (_'_6), all images in the sequence are copied, • If you press the MENUbutton and select Current sequence after you press the _) button and display images in a sequence as individual images, all images in the sequence are copied, • If you press the _) button and display images in a sequence as individual images, only Card to camera (memory card to internal memory) image copy is available, [] If "Memory contains no images," Is Displayed If a memory card that contains no images is inserted into the camera, Memory contains no images, is displayed when the camera is switched to playback mode, Press the MENUbutton to display the copy options screen, and copy the images saved in the camera's internal memory to the memory card, [] More Information File and Folder Names * _'_83 4" te

used to display a series of images shot continuously (sequence; _6) when viewing them in full-frame playback mode (_ 30) or in thumbnail playback mode (_] 75). Settings are applied to all sequences, and the setting issaved in the camera's memory even if the camera isturned off. m Choose Key Picture Press the [] button (playback mode) _ select an image in a sequence _ MENUbutton Choose key picture _ (_) button When Sequence display options is set to Key picture only, the key picture displayed in full-frame playback mode ([_] 30) and thumbnail playback mode (_ 75) can be set for each sequence of images. • When changing this setting, before pressing the MENUbutton, first select the desired sequence using full-frame playback mode or thumbnail playback mode. • When the key picture selection screen is displayed, select an image. _ '%he image Selection Screen" (_47) _52

for recording movies. Select either normal speed movies or HS (high speed) movies, which allow slow motion or fast motion playback (_'_54). Larger image sizes and faster movie bit rates produce greater image quality and larger movie file sizes. Normal Speed Movie Options Image size (pixels) Movie bit rate Aspect ratio _ 1080"1_/30p (default setting) 1920 x 1080 Approx. 15 Mbps 16:9 _] 1080130p 1920 x 1080 Approx. 12 Mbps 16:9 72_] 720130p 1280 × 720 Approx. 9 Mbps 16:9 ,_1:_o iFrame 540130p _ 960 x 540 Approx. 24 Mbps 16:9 4_=_=_E 480130p 640 X 480 Approx. 6 Mbps 4:3 * iFrame isa format supported by Apple inc. Movies cannot be edited (0"519). • When recording movies to the internal memory, recording may stop unexpectedly in some shooting conditions. When recording movies of important events, recording to a memory card (class 6 or higher) is recommended. • The frame rate isapprox. 30 fps no matter which option is selected (0"554). _53 g 4" 8. o

• Bit rates describe the amount ofdata captured each second.The camera uses variable bit rate (VBR) encoding to automatically adjust the bit rate depending on the subject being recorded, Movies of subjects with large amounts of motion have larger file sizes. HS Movie Options Recorded movies are played back in slow motion or fast motion. "Recording Movies in Slow Motion and Fast Motion (HS Movie)" (_56) -_::":' ::!;::': _]mag_siz e (pixelsh'] Option Aspect ratio ! 320 x 240 4:3 _p 2_a_:r:HS 240/8x 640 x 480 _ HS 480/4x 4:3 1280 x 720 _1 HS 720/2x 16:9 1920× 1080 _j HS 1080/0.5x 16:9 Records movies eight times faster than normal. Movies are played back in slow motion at 1/8 speed. Max. recording time: 10 seconds (playback time: one minute and 20 seconds) Records movies four times faster than normal. Movies are played back in slow motion at 1/4 speed. Max. recording time: 15 seconds (playback time: one minute) Records movies two times faster than normal. Movies are played back in slow motion at 1/2 speed. Max. recording time: 30 seconds (playback time: one minute) Records 2x speed fast motion movies. Max. recording time: two minutes (playback time: one minute) _1_ Notes About HS Movie • Sound is not recorded. • Zoom position, focus, exposure, and white balance are locked when you start recording. _54

recording time available when using a 4 GB memory card. Actual recording time and file size may vary depending on subject movement and image composition, even when memory capacity and movie settings remain constant, Available recording time may also vary depending on the type of memory card being used. Movie options Maximum recording time (4 GB) _ _ 1080"J%/30p (default setting) 30 rain _E 1080/30p 40 min _E 720/30p 55 rain ,$_ iFrame 540/30p 20 rain 4_,_E 480/30p 2 h 45 rain * The maximum size for a single movie is 4 GB, and the maximum recording time for a single movie is 29 minutes, even when there is sufficient free space on the memory card, When recording a movie, the remaining recording time that is displayed is the amount of recording time available for one movie, If the camera becomes hot, movie recording may stop before these limits are reached, • To confirm the maximum length of a movie that can be recorded in the internal memory (approx. 65 MB), remove the memory card from the camera, and then check the maximum recording time displayed in the monitor when shooting. [] More Information File and Folder Names , _83 rb r_ 5" _55

and Fast Motion (HS Movie) Enter mode -')' MENUbutton -')' _ icon -') Movie -')' _) button shooting menu options HS(high speed)moviescan be recorded Moviesrecorded using an HSmovie option canbe played back in slowmotion at 1/8to 1/2 of normal playbackspeed,or played back infast motion at a speedtwo times fasterthan normal speed 1 Press the multi selector • or • to select an HS movie option (_54) and then press the I_) button. • Press the MENUbutton after changing the settings and return to the shooting screen, B" 8 r_ o 2 Press the • (*_ movie-record) button to start HSmovieoptions recording. • Movie recording begins after the monitor briefly turns off • Themaximumrecordingtimedisplayindicatesthe maximum recording time for HS movies 3 Press the • (_ movie-record) button to end recording. _56

• Zoom position, focus, exposure, and white balance are locked when you press the • ('_ movie record) button to start recording a movie. [] HS Movie Recorded movies are played back at about 30 fps, When Movie options (_'_53) is set to 2_'_ HS 240/8x, 4_pi_ HS 480/4x, or _ HS 720/2x, you can record movies that can be played back in slow motion. When set to _[,1 HS 1080/0.5x, movies that can be played back in fast motkm at a speed two times fester than normal speed can be recorded. When _ HS 480/4x is selected: Movies are recorded at high speeds _r up to 15 seconds, and are played back in slow motion at a speed four times slower than normal speed, Recording i 15s ] _i ......................... Playback L 1 min Slow motion playback (no sound) When _j HS 1080/0.5x is selected: Movies of up to two minutes in length are recorded when recording for the purpose of high speed playback, Movies are played back two times faster than normal speed, Recording i 2min i Playback I_ 1 min _r ........ Fast motion playback (no sound) R re r_ _57

mode -') _) button shooting menu You can select how the camera focuses in movie mode. Option Description Focus is locked when the • (_ movie record) button ispressed to AF-SSingle AF start recording, (default setting) Select this option when the distance between the camera and the subject remains fairly consistent, Camera focuses continuously. Selectthis option when the distancebetween the camera and subject AF-F Full-time AF changessignificantly during recording. Thesound of the camera focusing may beheard in the recorded movie.Useof Single AF isrecommended to preventthe soundof the camerafocusing from interfering with recording. • When an HS movie option is selected in Movie options, the setting isfixed at Single AF. Wind Noise Reduction m m Enter shooting mode -) MENUbutton -) _ menu icon -) Wind noise reduction -) _) button You can select the wind noise reduction setting used when recording movies. Op_ R_d when wind passesover the microphone. _ On _U__s in locations with strong winds, Other _ _ ng playback, Off (default setting) _Wir/d noi_or_s disabled, • The icon for the current setting isdisplayed in the monitor when the camera is in shooting mode (_ 8). No icon is displayed when Off is selected. • When an HS movie option is selected in Movie options, the setting isfixed at Off. _$8

icon -) Welcome screen -) _) button You can configure the welcome screen that is displayed when you turn on the camera. Option Description The camera enters shooting or playback mode without displaying None (default setting) the welcome screen, The camera displays a welcome screen and enters shooting or COOLPIX playback mode, Displays an image selected for the welcome screen, When the image selection screen is displayed, select an image (_47) and then press the _ button, • As the selected image is saved by the camera, it is displayed when Select an image the camera is turned on even if the original image is deleted. • Images captured using Easy panorama (_ 43) or 3D photography (_ 45), and images created by using small picture (_]6) or crop (_] 7) that are 320 x 240 or smaller, cannot be selected. S" _59

Option Date and time Date format Time zone Description Allows you to set the camera's clock to the current date and time. Use the multi selector to set each item displayed on the screen. • Select an item: Press _" or • (changes between D, M, Y, hour, minute). Edit the highlighted item: Press • or V. Apply the setting; Select the minute setting and then press the _) button. The available date formats are YearlMonthlDay, Month/Day/Year, and Day/Month/Year, Home time zone (_') can be specified and daylight saving time car/be enabled or disabled. When the travel destination (_]lm)is selected, the time difference between the travel destination and the home time zone (_') is automatically calculated and the date and time in the selected region are used when the camera records the shooting date and time. This can be useful when traveling. _60

selector to select Time zone and then press the I_) button. 2 Select _" Travel destination and then press the _) button. • The date and time displayed in the monitor changes according to the region currently selected, 3 Press b. • The travel destination screen is displayed. s" s _61

destination time zone. • If daylight saving time is in effect, press • to enable the daylight saving time function. % is displayed in the monitor and the camera clock is advanced one hour. Press • to disable the daylight saving time function. • Press the _) button to apply the travel destination time zone. • If the desired time zone is not available, set the camera clock to local time using the Date and time setting. • While the travel destination time zone is selected, _ is displayed in the monitor when the camera is in shooting mode. $- s 8 n o [] _ Home Time Zone • To switch to the home time zone, select _ Home time zone in step 2, and then press the @ button. • To change the home time zone, select _ Home time zone in step 2, and then complete steps 3 and 4. [] Daylight Saving Time When daylight saving time starts or ends, turn the daylight saving time function on or off from the time zone selection screen displayed in step 4. ] Imprinting Date on Images Enable date imprint from the Print date option (_'565) in the setup menu after the date and time have been set. When the Print date option is enabled, images are saved with shooting date imprinted on them. _62

info is displayed, If no operations are Auto info (default setting) performed after a few seconds, the display is the same as Hide info, The information is displayed again when an operation is performed, Hide info PD R r_ g_ r_

when recording movies. In addition to information shown with Auto info, a frame that represents the area that is captured when recording movies is displayed before recording begins. The movie frame is not displayed when recording movies, Playback mode The same information as in Auto info is displayed, The same information as in Auto info is displayed, ] Battery Level When the battery level is low, _] is always displayed regardless of the Photo info setting.

_) button menu The shooting date and time can be imprinted on the images when shooting, allowing the information to be printed even from printers that do not support date printing (_44). The icon for the current setting is displayed in the monitor when the camera is in shooting mode (_]] 8). No icon is displayed when Off is selected. _65

cannot be imprinted in the following situations: When using Sports, Night portrait (when Hand-held is selected), Night landscape (when Hand-held is selected), Museum, Backlighting (when HDR is set to On), Easy panorama, Pet portrait (when Continuous is selected), or 3D photography in scene mode When the continuous shooting setting (_36) is set to Continuous H, Continuous L, Continuous H: 120 fps, Continuous H: 60 fps, or BSS When recording movies • Dates imprinted at an Image mode setting (_31) of l_! 640x480 may be difficult to read, Select an Image mode setting of [] 1600xl 200 or larger when using print date, • The date is saved using the format selected in the setup menu's Time zone and date option (_ _8, _,_60). [] Print Date and Print Order When printing with a DPOF compatible printer that can print the shooting date and shooting information, you can use the Print order option (_42) to print this information in images, even if the Print date function was set to Off at the time of shooting, _66

with zoom applied or when shooting at slow shutter speeds. The effects of camera shake are reduced when recording movies, in addition to when shooting stillimages. Set Vibration reduction to Off when shooting using a tripod to stabilize the camera. Option Description Images are corrected optically using the lens shift method to reduce the effects of camera shake when shooting still images, and under the following conditions, images are processed and corrected before saving them. • When the flash does not fire ((4111))* On (hybrid) • When the shutter speed is slower than 1/30 second (at the maximum wide-angle position) or 1/250 second (at the maximum telephoto position) • When the selfitimer is off • When Single is selected for the Continuous setting • When iSO sensitivity is 200 or lower _1) On (default setting) The effects of camera shake are reduced using the lens shift method. Off Vibration reduction is disabled. The icon for the current setting is displayed in the monitor when the camera is in shooting mode ([_) 8). No icon is displayed when Off is sdected. _1_ Notes About Vibration Reduction • After turning on the camera or after switching from pbyback mode to shooting mode, wait for the shooting mode screen to be displayed completely before taking pictures. • Due to characteristics of the vibration reduction function, images displayed in the camera's monitor immediately after shooting may be displayed blurry, • Vibration reduction may be unable to completely eliminate the effects of camera shake in some situations, • When camera shake isextremely high or low, images may not be corrected even when this feature isset to On (hybrid}. • When the shutter speed is fast or extremely slow, images may not be corrected even when this feature is set to On (hybrid}, • When this feature is set to On (hybrid) and images are corrected, it takes more time than normal to save images, This is because when you take a picture, the shutter is released twice automatically in order to correct the image. Shutter sound (_'_ 70) is heard only once, One image is saved. _67 4" R t_ 5"

detection setting which reduces the effects of subject movement and camera shake used when shooting still images. Option Description _,_Auto (default setting) When the camera detects subject movement or camera shake, the ISO sensitivity and shutter speed are automatically increased to reduce blurring. However, motion detection does not function in the following situations: • When the flash fires • In the followinq scene modes: Sports (_ 38), Night portrait (_ 39), Dusk/dawn (_ 40), Night landscape (_ 40), Museum (_ 41), Fireworks show (_ 41), Backlighting (_ 42), Easy panorama (_ 43), Pet portrait (_ 44), and 3D photography (_ 45) • In I_l (auto) mode, when Continuous is set to Continuous H: 120 fps (_'_36), Continuous H: 60 fps (6"_36), or Multi-shot 16 (6"_37) • When the ISO sensitivity option (_38) is fixed at a particular value in It_ (auto) mode Off Motion detection is disabled. The icon for the current setting is displayed in the monitor when the camera is in shooting mode ([[_ 8). When the camera detects camera shake or subject movement, it increases shutter speed and the motion detection icon turns green. No icon is displayed when Off is selected. _1_ Notes About Motion Detection • Motion detection may be unable to completely eliminate the effects of subject movement and camera shake in some situations. • Motion detection may not function if the subject exhibits significant movement or is too dark. • The images captured using motion detection may be somewhat "grainy" in appearance. _68

which assists autofocus operation when the subject is dimly lit. _.... Description Option The AF assist illuminator lights automatically when the subject is dimly lit, AUTOAuto The illuminator has a range of about 5.0 m (16 ft) at the maximum wide angle position and about S,Om (16 ft) at the maximum telephoto position, (default setting) Note that for some scene modes such as Museum (_ 41) and Pet portrait (_ 44), the AF assist illuminator may not light even when Auto is selected, The AF assist illuminator does not light, The camera may be unable to focus Off under dim lighting. te t_ _69

Option Button sound Shutter sound following sound settings. Description Select On (default setting) or Off, When On is selected, a beep sounds once when operations are completed successfully, two times when the focus has been locked, and three times when an error is detected, and the welcome sound is played when the camera is turned on. Select On (default setting) or Off. Even when set to On, the shutter sound is not heard in the following situations: _o When Continuous is set to any setting other than Single (_36). When using Sports (_ 38), Museum (_ 41), Easy panorama (_ 43), or Pet portrait (_ 44) in scene mode When recording movies B" m o _1_ Notes About Sound Settings Button sounds and the shutter sound are not heard when using the Pet portrait scene mode. _70

mode, the power on lamp flashes, • If no operations are performed for approx, another three minutes, the camera turns off automatically. • When the power on lamp is flashing, pressing any of the following buttons turns the monitor back on: * Power switch, shutter release button, O button, [] button, or • (_1_ movie record) button [] The Auto Off Setting • The time that passes before the camera enters standby mode is fixed in the following situations: When a menu is displayed; Three minutes (when auto off is set to 30 s or 1 rain) During slide show playback: Up to 30 minutes When the audio/video cable is connected: 30 minutes When an HDMI cable is connected: 30 minutes • The camera does not enter standby mode when using the AC Adapter EH 67, • The camera does not enter standby mode while the Eye Fi card is uploading images.

to format the internal memory or a memory card. Formatting the internal memory or memory cards permanently deletes all data. Data thathas been deleted cannot be recovered. Be sure to transfer important data to a computer before formatting. Formatting the Internal Memory To format the internal memory, remove tile memory card from the camera. The Format memory option isdisplayed in the setup menu. ra- m o Formatting Memory Cards When a memory card is inserted in tile camera, the Format card option is displayed in tile setup menu _1_ Notes About Formatting Internal Memory and Memory Cards • Do not turn the camera off or open the battery chamber/memory card skit cover du ring formatting, • The first time you insert a memory card that has been used in another device into this camera, be sure to format it with this camera, _-B72

Czech Finnish Dansk Danish Swedish Deutsch German TJ_ng Vi_t Vietnamese English T_irkqe Turkish Espa_o_ "S"p'a"n"i";"h ............................................................................... y_o%_T'%"_"Z"n"i"a"n ......................... -_n_,_a Gre;"_ ................................................................................. _5_-_ Arabic Fran_ais French ;_¢I'._T[ Bengali indonesia Indonesian 1_ Simplified Chinese italian _1!_ Hungarian Nederlands Norse Polski r,ort._;;'i3¥f PyccK_ Russian "_--_ Rorn_n_ Romanian aqteq_,_ Dutch Norwegian "_" Polish Brazilian Portuguese _4 L_ Traditional Chinese Hindi Japanese Korean Marathi Persian Tamil TNugu Thai s" R _73

Option Description Video mode Set the camera's analog video output signal to NTSC or PAL according to the specification of your TV. Select the HDMI output image resolution from Auto (default setting), H DMI 480p, 720p, or 1080i. When Auto is selected, the option best suited to the TV to which the camera is connected is automatically selected from 480p, 720p, or 1080i. Set whether or not the camera receives signals from an HDMI CEC compatible television when connected with an HDMI cable. HDMI device control Select On (default setting) to use the television's remote control to perform playback operations. , "Using a TV Remote Control (HDMi Device Control)" (_22) Set the method used to output 3D images to HDMi devices. HDMI 3D output Select On (default setting) to play back 3D images captured with this camera in 3D, HDMI and HDMI-CEC "HDMI" is the abbreviation for High Definition Multimedia Interface and is one type of multimedia interface. "HDMI CEC" is the abbreviation for HDMI Consumer Electronics Control, which enables compatible devices to control each other and allows the user to operate multiple devices with one remote control.

modes: • I_ (easyauto) mode • Portrait (_) 38) or Night portrait ([_) 39) scene mode Option Description When the camera detects that one or more human subjects may have blinked in an image captured using face detection, the Did someone blink? screen is displayed in the monitor, On The face of the human subject that may have blinked when the shutter was released is framed by a yellow border. Should this occur, check the image and determine whether or not another image should be captured (_76), Off (default setting) Blink warning is disabled. g 4" R re r_ _75

Screen When tile Did someone blink? screen shown on tile right is displayedin the monitor, the operationsdescribed below are available. If no operations are performed within a few seconds, the camera automatically returns to shooting mode. m o Function Ill Description Enlargethefaceinwhichblinkingeyes Rotate the zoom control to T (¢{). were detected Switch to full-frame playback mode Rotate the zoom control to W (_;;_). While zoomed in, press the multi selector • or • to Select the face to be displayed switch to another face. Delete the image Press the -_ button. Press the _) button, shutter release button, 0 button Switch to shooting mode or the • (_ movie record) button. _76

camera's Eye-Fi card (available from third-party manufacturers) sends images to your computer. / ...... Description 2 ] Enable _ Images created with this camera are uploaded to the pre determined _fault setting) 1 computer. Disable ] Images are not uploaded. _1_ Notes About Eye-Fi Cards • Note that images are not uploaded if signal strength is insufficient even if Enable is selected, • When using the camera in an area where wireless signal output is not permitted, set this feature to Disable, • Refer to the instruction manual of your Eye Fi card for more information, In the event of malfunction or if you have any questions, contact the card manufacturer, • The camera can be used to turn Eye Fi cards on and off, but may not support all Eye Fi functions, • The camera is not compatible with the Endless Memory function. When it is set on a computer, disable the fu notion, if the Endless Memory function is enabled, the nu m bar of pictures taken may not be displayed correctly, • The Eye Fi upload feature is intended for use only in the country of purchase. Before using it in other countries, refer to laws and regulations of that country. • When this setting is set to Enable, batteries are drained faster than normal, [] Eye-Fi Upload Indicator The upload status of the Eye Fi card in the camera can be confirmed on the monitor (_ 8, 10). • _: Eye-Fi upload is set to Disable. • _' (lights): Eye Fi upload enabled; waiting for image upload, • _' (flashes): Eye Fi upload enabled; uploading images. • _': Eye Fi upload enabled but no images available for upload, • _: An error occurred, The camera cannot control the Eye Fi card. R re r_ _'_ 77

(_ 42) Off Easy panorama (_ 43) Normal (180 °) Continuous shooting in pet portrait (_ 44) Continuous Pet portrait auto release in pet portrait (_ 44) On Special Effects Mode selection menu (_ 47) _78

_"w_÷_WE)e fa u It value Movie options (_53) _ 1080_/30p Autofocus mode (_58) Single AF Wind noise reduction (_58) Off Setup Menu Option Default value Welcome screen (_59) None Photo info (_63) Auto info Image review (_63) On Brightness (_63) 3 Print date (_65) Off R ta t_ 5" _79

(d_'_83). After a reset, the camera determines the largest file number in the internal memory or on the memory card and saves images using the next available file number. To reset file numbering to "0001", delete all images saved in the internal memory or on the memory card (_ 32) before selecting Reset all. • The following menu settings remain unaffectect when menus are reset with Reset all. Shooting menu: Preset manual data (_34) acquired for White balance Playback menu: Choose key picture (d_'_52) _'_80

Setup menu: Settings for image registerect for Welcome screen (_59), Time zone and date (_60), Language (_73), Video mode [or TV settings (_74), and Battery type (_82) S"

22), select the type that matches the batteries currently in use. Option _ Description Alkaline (default setting) LR6/L40 (AA size) alkaline batteries COOLPIX (Ni-MH) Nikon EN MH2 rechargeable Ni MH (nickel metal hydride) batteries Lithium FRd/L91 (AA size)lithium batteries $- 8 m o Firmware Version MENU button -) _ icon -) Firmware version -) _) button menu You can view the current camera firmware version. _82

I Identifier (not shown on camera monitor) Original still images DSCN and movies Small copies Cropped copies !mages created by an image editing function other than small picture or crop FSCN and movies created bythe movie editing function DSCNOOO1.JPG I II II SSCN RSCN Extension (indicates file format) File number (assigned automatically in ascending order, starting with "0001 ") • Files are saved in folders named with a folder number followed by "NIKON" (e.g. "IOONIKON"). A single folder can hold up to 200 images; if the current folder already contains 200 images, a new folder, named by adding one to the current folder name, is created the next time an image is captured (e.g. "100NIKON" _ "101NIKON"). When the number of files within afolder reaches gggg, a new folder is created. File numbers are assigned automatically starting with 0001. • Files copied using Copy > Selected images are copied to the current folder, where they are assigned new file numbers in ascending order starting from the largest file number in memory. Copy > All images copies all folders from the source medium; file names do not change but new folder numbers are assigned in ascending order, starting from the largest folder number on the destination medium (_50). 4" R re r_ 5" _83

is numbered 999 and contains 200 images, or an image is numbered 9999, no further images can be captured until the internal memory or memory card is formatted (_72), or a new memory card is inserted. m o _84

Battery charger, batteries) rechargeable batteries X • Replacement rechargeable batteries: Bechargeable Ni MH batteries EN MH2 B4(set of four EN MH? batteries) AC adapter AC Adapter EH67 Hand strap Hand Strap AH CP1 When using EN MH2 rechargeable Ni MH batteries with the camera, charge the batteries four at a time using Battery Charger MH 73. Also,do not charge batteries at the same time if they have different amounts of charge remaining (_:4). EN MH] rechargeable Ni MH batteries cannot be used, 4" _85

of the camera or the batteries have become The camera will turn off hot, 23 to prevent overheating. The camera turns off automatically. Allow the camera or the batteries to cool down before turning the camera on again. _I_tt Camera cannot focus, • Refocus, 28, 71 (flashes in red) • Use focus lock, 70 Please wait for the camera to finish Wait until the image is saved and the message disappears from the display, recording, Memory card is write protected, Not available if Eye Fi card is locked. This card cannot be used. This card cannot be read, Write protect switch is in "lock" position. Slide write protect switch to "write" position, Eye Fi card write protect switch is in "lock" position. Slide write protect switch to "write" position, Error accessing Eye Fi card. • Check that terminals are clean, • Confirm that the card is correctly inserted. Error accessing memory card. • Use approved card. • Check that terminals are clean, • Confirm that the card is correctly inserted. 16 16 @':_'-20 16 16 6"_86

Memory card has not been formatted for use in the camera, Format card? Formatting deletes all data saved on the memory card, Be sure to select No and make copies of any images which need _'_'-5 Yes to be kept before formatting the memory card. Select Yes No and then press the _) button to format the memory card. Memory card is full, • Change the image mode setting. _31 Out of memory. • Delete images, 32, 92 • Insert new memory card, 16 • Remove memory card and use internal memory. 17 Error occurred while saving image. _'572 Format internal memory or memory card. Camera has run out of file numbers. insert a new memory card or format internal memory or _'583 memory card. image cannot be used for welcome screen. image cannot be saved. The following images cannot be registered as welcome screen. • images captured using Easy panorama or 3D _'559 photography • Images reduced to 320 × 240 size or smaller with cropping or small picture editing insufficient space to save a copy, 32 Delete images from destination, One or more portrait subjects may have blinked when the A blink was detected in _icture was taken. 30, the picture ]ust taken, Check the image in playback mode, _41 Cannot edit selected image, Image cannot be • Select images that support editing function, modified, • Movies cannot be edited. R te t_ _87

card, Select a memory card with faster write speed. Memory contains no images, No images in the internal memory or memory card. • Remove the memory card from the camera to play back images saved in the camera's internal memory, • To copy images from internal memory to memory card, press the MENUbutton, The copy screen is displayed and images in the internal memory can be copied to memory card, 16 16 0"_50 File not created with this camera, File contains no image File cannot be viewed on this camera. data. View file using a computer or the device used to create or edit this file, All images are hidden. No images available for a slide show, _45 This image cannot be image is protected, _46 deleted, Disable protection. Travel destination is in Home and travel destination are in the same time zone, _61 the current time zone, The flash is lowered, 39, 42, Raise the flash, Raise the flash when using Night portrait or Backlighting 54 (when I"IDR is set to Off) in scene mode. _'_88

only, Unable to create panorama, Pan the camera more slowly. Shooting failed Failed to take second shot Failed to save 3D image Could not shoot using easy panorama, Shooting with easy panorama may not be possible in the following situations. • When shooting does not end after a certain amount of time, • When the camera is moved too fast. • When the camera is not moved properly in the panorama direction. When capturing 3D images, the first image could not be captured. • Try shooting again. • In some shooting conditions, such as when the subject is moving, dark, or low in contrast, shooting may not be possible, When capturing 3D images, the second shot could not be successfully taken after the first shot. • Try shooting again, After capturing the first image, move the camera horizontally and frame the subject so that it is aligned with the guide, • In some shooting conditions, such as when the subject is dark or low in contrast, the second image may not be captured, The camera failed to save the 3D image, • Try shooting again. • Delete images, • 3D images may not be created depending on the subject or shooting conditions, resulting in failure to save them. _2 45 45 45 32 R _89

be attached, or a lens error has occurred. Make sure that the lens cap has been removed, then turn the Lens error camera on again. If the error persists even after the camera is turned offand then on again, contact retailer or Nikon authorized service representative. Communications error Error occurred during communication with printer. Turn camera offand reconnect USB cable. Error has occurred in camera's internal circuitry. Turn camera off, remove and reinsert batteries, and turn System error camera on. If error persists, contact retailer or Nikon authorized service representative. Printer error. Printer error: check Check printer. After solving the problem, select Resume and printer status, then press the _) button to resume printing. _ Printer error: check Specified size of paper is not loaded in printer. Load the specified size of paper, select Resume, and then paper _ress the _) button to resume printing. _ Paper has jammed in printer. Printer error: paperjam Remove the jammed paper, select Resume, and then press the _) button to resume printing. _ Printer error: out of No paper is loaded in printer. Load the specified size of paper, select Resume, and then paper _ress the _) button to resume printing. _ Inkerror. Printer error: check ink Check ink, select Resume, and then press the _) button to resume printing. _ Running out of ink or ink cartridge is empty. Printer error: out of ink Replace ink cartridge, select Resume, and then press the _) button to resume printing. _ 4,22 _24 14, 23 _90

_ Select Cancel and then press the _) button to cancel printing, _ See the documentation provided with your printer for further guidance and information. S" te t_

Caring for the Product ............................................... _2 The Camera ............................................................................................................. _:-2 Batteries ................................................................................................................... _)_-3 Memory Cards ....................................................................................................... _)_-5 Cleaning and Storage ................................................ _-6 Cleaning ................................................................................................................... _)_-6 Storage ..................................................................................................................... _)_-7 Troubleshooting ........................................................ _)1-8 Specifications ........................................................... _)_-16 Approved Memory Cards ............................................................................... _)i-20 Supported Standards ....................................................................................... _)_-21 Index ......................................................................... _-23 m Z o D_

Safety" ([_) ix-xiv) when using or storing your camera. _1_ Do Not Subject the Product to Strong Shocks The product may malfunction if dropped or struck. Additionally, do not touch or apply _rce to the lens. Keep Dry If water enters the camera, internal components may rust or otherwise become damaged, and repairing the camera may be expensive or even impossible. _1_ Avoid Sudden Changes in Temperature Sudden changes in temperature, such as when entering or leaving a heated building on a cold day, can cause condensation to form inside the device. To prevent condensation, place the device in a carrying case or a plastic bag before exposing it to sudden changes in temperature. _1_ Keep away from Strong Magnetic Fields Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields, Strong static charge or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage data saved on the memory card, or affect the product's internal circuitry, _1_ Do Not Point the Lens at Strong Light Sources for Extended Periods Avoid pointing the lens at the sun or other strong light sources _r extended periods when using or storing the camera. Intense light may damage the image sensor or other components, producing a white blur effect in photographs. _2

damage the camera or memory card. If removed while the camera is saving or deleting data, data may be lost and the camera's memory or the memory card may be damaged, _1_ Notes on the Monitor • Monitors and electronic viewfinders are constructed with extremely high precision; at least 99.99% of pixels are effective, with no more than 0,01% being missing or defective. Hence while these displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is not a malfunction and has no effect on images recorded with the device. • Scraping or pressing on the surface of the monitor may result in damage or malfunction, Should the monitor break, care should be taken to avoid injury caused by broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes or mouth, • images in the monitor may be difficult to see under bright lighting. • The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your Nikon authorized service representative, Batteries Be sure to read and follow the warnings noted in "For Your Safety" (_ ix-xiv) before use. _1_ Notes About Using Batteries • Used batteries may overheat. Handle with caution. • Do not use batteries beyond their recommended expiration date. • Do not turn the camera on and off repeatedly if discharged batteries are inserted in the camera. _1_ Spare Batteries We recommend carrying spare batteries depending on where you are shooting. It may be difficult to purchase batteries in certain areas, _1_ Charging Batteries If using optional rechargeable batteries, charge the batteries he.re taking pictures. Batteries are not charged at the time of purchase, Be sure to read and follow the warnings noted in the operating instructions included with the battery charger. £- o_

batteries with different amounts of charge remaining, or batteries of a different make or model, • When using EN MH2 batteries with the COOLPIX L820, charge four batteries at a time using Battery Charger MH 73. Use only Battery Charger MH 73 to charge EN MH2 batteries. • When using Battery Charger MH 73, only charge EN MH2 batteries. • EN MH1 rechargeable Ni MH batteries cannot be used, Notes About Rechargeable Ni-MH Batteries • If you repeatedly charge rechargeable Ni MH batteries while they still have some charge remaining, the message Batter,/exhausted, may be displayed prematurely when using the batteries, This is due to the "memory effect," in which the amount of charge the batteries can hold decreases temporarily, Use the batteries until there is no charge remaining and they will return to their normal behavior. • Rechargeable Ni MH batteries discharge even when not being used, We recommend charging the batteries just before using them. _1_ Cold Environment Usage Battery performance decreases in cold environments. When using the camera in cold environments, try not to let the camera and batteries become too cold, The camera may not function if you use discharged batteries in cold environments, Keep spare batteries warm and alternate between two sets of batteries, Batteries that cannot be used because they have become too cold can often be used again when they have been warmed up. Battery Terminals Dirt on the battery terminals can prevent the camera from functioning, Remove dirt from the terminals using a dry cloth, Remaining Battery Charge If you insert discharged batteries into the camera, the camera may indicate that the batteries have adequate charge remaining. This is a characteristic of batteries, Recycling Used batteries are a valuable resource. Please recycle used batteries in accordance with local regulations, Cover the battery terminals with plastic tape when recycling, #:4

__20 • Observe the precautions noted in the documentation included with your memory card. • Do not affix labels or stickers to the memory card. • Do not format the memory card using a computer. • Before using a memory card with this camera, format the card using this camera if the card has been used with another device. Before using a new memory card, we recommend using this camera to format the card, • Note that formatting o memory cardpermanently deletes oil images and other data on the memory cord, If there isdata saved on the memory card that you wish to keep, copy that data to a computer be_re _rmatting, • If the messageCard is not formatted. Format card? isdisplayed when you insert a memory card, the memory card must be formatted. Ifthere isdata on the memory card that you do not want to delete, select No, Copy that data to a computer before formatting, To format the memory card, select Yes and then pressthe @ button. • Observe the following precautions while formatting the memory card, saving and deleting images, and copying images to a computer, otherwise data or the memory card itself may be damaged, Do not open the battery chamber/memory card slot cover or remove the memory card or batteries. Do not turn off the camera Do not disconnect the ACadapter 2- o_ _5

grime that cannot be removed with a blower, wioe the lens with a soft, dry cloth or an eveqlass cleanina cloth, usinq - ...J_ Lens a gentle spiral motion that starts in the center and moves toward the edges, Do not wipe forcefully or wipe with a rough cloth, otherwise the camera may be damaged or malfunction, If you still cannot remove the grime, wet a soft cloth with a commercial liquid lens cleaner and gently wipe offthe grime, Remove dust or lint with a blower, To remove fingerprints, oil, or other grime, wipe Monitoi" the area with a soft, dry cloth or an eyeglass cleaning cloth. Do not wipe forcefully or wipe with a rough cloth, otherwise the camera may be damaged or malfunction, ......................... • After using the camera at the beach or other sandy or dusty environment, wipe off Body any sand, dust, or salt with a dry cloth lightly dampened with fresh water and dry thoroughly. Note that foreign matter inside the camera could cause damage not covered by the warranty, _6

period. To prevent mold or malfunction and to ensure long, trouble-free use of the camera, we recommend you insert the batteries and operate the camera approx, once a month. Do not store the camera with naphtha or camphor moth balls, or in any of the following locations: • Next to equipment that produces strong electromagnetic fields, such as televisions or radios • Places that are exposed to temperatures below 10 °C (14 °F) or above 50 °C (122 °F) • Places that are poorly ventilated or subject to humidity of over 60% 2- Q_ _7