Nikon COOLPIX S1200pj Reference Manual

and use the camera to project them. 1 In PowerPoint, save a PowerPoint file with a different name in JPEG format. • A new folder with the same name as the renamed file is created, and a JPEGfile for each slide of the PowerPoint document is saved in the new folder. • Be sure to use PowerPoint to save the file with a new name. Refer to the PowerPoint Help documentation for more information on saving files with new names and in different formats. 2 Change the name of the folderand JPEG files. • Folde[ name: three-digit single byte number 1+ five-character single-byte alphabetic string 2 e.g. "IOSUSERS" JPEGfile name: FSCN+ four digit single-byte number 3 e.g. "FSCN0001.j pg," "FSCNOOO2jpg," etc. 1. Use a three digit number that is one higher than the highest number used for existing subfolders in the DCIM folder described in step 3.The "105" in the example above is used when "104" isthe highest number in the names of existing subfolders. 2. "NIKON" cannot be used asthe five character single byte alphabetic string. 3. The JPEGfiles can be projected in the same order as the slides in the PowerPoint presentation if their four-digit single byte file numbers are placed in the same order. 3 Using the card reader, open the memory card 4 folder on the computer desktop. • Open the DCIM folder and copy the folder containing the JPEGfiles created in step 2 into it. • Additional JPEGfiles created from PowerPoint files can be added to the folders containing the JPEGfiles. (However, only the files can be added to these folders. The folders containing the files cannot be placed in these folders.) • When removing the memory card from the computer, remove the removable disk first and then remove the memory card. 4. Use a memory card that has been formatted or used for shooting at least once with the COOLPIX S1200pj. 4 Insert the memory card into the camera, turn on the camera, and open the projector cover. • The camera's built-in projector operates the same as normal when projecting PowerPoint documents converted to JPEGformat. [] Notes on Playing Back PowerPoint Documents (JPEG Files) • PowerPoint animations cannot be projected. • In thumbnail playback mode, PowerPoint documents are displayed as black thumbnails. 4" s t_

movies recorded using ,/_'_ iFrame 540 (960x540) (_'_ 58)). 1 Play back the desired movie and pause playback (1_ 94). 2 Press the multi selector _ or i_ to choose [] on the control panel, and press the _) button. _-_ • The movie edit screen is displayed. 3 Press • or • to choose _ (Choose start point) on the control panel. • When edidng begins, theffamewhereplaybackwaSpausedisthestartpoint. • Pressthe multi selector • or i_ to move the start point to the beginning of the desired portion of the movie. • To cancel editing, choose • or • and select _'J (Back) and press the 0 button. 4 Press•or •tochoose _ (Choose end ,..__,...,_ point). • Pressthe multi selector • or i_ to move the end point on the right edge to the end of the desired portion of the movie. Select [] (Preview) and press the _) button to play back the specified portion of the movie that will be saved. While the preview is playing, rotate the zoom control to T or W to adjust playback volume. While the preview is playing back, press the _) button to stop playback. .5 When the settings are finished, press • or • to choose ill Save, press the _) button. _34

• The edited movie is saved. • To exit without saving, sdect No. £ £. Notes on Movie Editing • A movie that was created by editing cannot be trimmed again. To trim another area of the movie, select and edit the original movie. • Movies are trimmed in one second intervals, therefore the actual trimmed portion of the movie may differ slightly from the selected start and end points. Movies cannot be trimmed so that they are less than two seconds long. • Editing functions are not available when there is not enough free space in the internal memory or on the memory card to save the edited copies. [] More Information See "image/Sound File and FokJer Names" (_ 80) for more information. _35

mode --_ MENUbutton --_ [] tab --_ Skin portrait screen softening Enable skin softening. When the shutter is released, the camera detects one or more human faces (up to three), and processes tile picture to soften facial skin tones before saving tile picture. Tile degree of skin softening applied can be selected from High, Normal (default setting), and Low. • Tile current setting can be confirmed by tile indicator displayed in tile monitor with shooting ([_[_ 8). No indicator is displayed when Off is selected. Tile effects of skin softening are not visible when framing pictures for shooting. Check tile degree of skin softening performed in playback mode. Smile Timer In tile smart mode --_ MENUbutton --_ [] tab --_ Smile timer portrait screen When On (default setting) is selected, the camera detects human faces and then automatically releases the shutter whenever a smile is detected. • The current smile timer setting is indicated by an icon when shooting ([_[_ 8). No icon is displayed when Off is selected. Blink Proof In the smart mode _ MENUbutton _ [] tab _ Blink portrait screen proof When On is selected, tile camera automatically releases the shutter twice each time a picture is taken. Of the two shots, one in which the subject's eyes are open is saved. • If the camera saved a picture in which the subiect's eyes may have been closed, the dialog shown at right is displayed for a few seconds. • Flash cannot be used when On is selected. • The default setting is Off. • The current blink proof setting is indicated by an icon when shooting ([_[_ 8). No icon is displayed when Off is selected. _36

The human brain is able to adapt to changes in the color of the light source, with the result that white objects appear white whether seen in the shade, direct sunlight, or under incandescent lighting. Digital cameras can mimic this adjustment by processing pictures according to the color of the light source. This is known as "white balance." For natural colors, choose a white balance setting that matches the Iight source before shooting. Although the default setting, Auto, can be used under most types of lighting, the white balance setting suited to a particular light source can be specified manually to achieve more accurate results. Option Description _UTOAuto White balanceautomatically adjusted to suit lighting (default setting) conditions. Bestchoice in most sRuadons. Neutral colored object used as reference to set white balance PRIt Preset manual under unusual lighting conditions. See "Preset Manual" for more information (_ 38). _i)} Daylight White balance adjusted for direct sunlight. _t)} Incandescent Use under incandescent lighting. Fluorescent Use under fluorescent lighting. Cloudy Use when taking pictures under overcast skies. Flash Use with the flash. The icon for the current setting is displayed in the monitor ([_ 8). However, when Auto is selected, no icon is displayed. t_ _1_ Noteon White Balance At white balance settings other than Auto or Flash, turn the flash off (_) (_ 54). _37

iseffective with mixed lighting or to compensate for light sources with a strong color cast when the desired effect has not been achieved with white balance settings like Auto and Incandescent (for example, to make pictures taken under a lamp with a red shade Iookas though they had been shot under white light). Follow the procedure below to measure the white balance value according to the light source when shooting. 1 Place a white or gray reference object under the lighting that will be used during shooting. _I Display shooting menu ([_[_ 12, 51), use the multi selector to choose PR[Preset manual in the White balance menu and press the _}_ button. • Thecamerazooms in to the positionfor measuring white balance. 3 Choose Measure. • To apply tile most recently measured value for preset manual, choose Cancel and press the _) button. $- p_ m o 4 Frame the reference object in the measuring window. Measuring window 5 Press the _ button to measure a value for preset manual. • Theshutter isreleasedand the new white-balance value isset.No pictureisrecorded. L_l Note on Preset Manual Avalueforflashlighting cannot be measuredwith Presetmanual.Whenshooting using the flash, setWhitebalanceto AutoorFlash. _'_ 38

Mode) Continuous In the i_1 mode -_ MENUbutton -_ IL_ tab -_ Continuous (auto) shooting screen Enable continuous shootinc or BSS (best shot selector). Ill . . Option Description [] Single One picture is taken each time the shutter-release button is (default setting) )ressed. While the shutter release button is held down, up to 18 Continuous )ictures are taken at a rate of about 0.8 frames per second (fps) when Image mode is set to [] 4320x3240. Tile "best shot selector" is recommended when shooting with the flash off or the camera zoomed in, or in other situations in BSSBSS which inadvertent motion can result in blurred pictures. When (Best Shot Selector) BSS is on, the camera takes up to ten pictures while the shutter release button is held down.The sharpest picture in the series is automatically selected and saved. Each time the shutter-release button is )ressed, camera takes 16 shots at a rate of about 30 fps and arranges them in a _1 Multi-shot 16 single image shots. • Image mode is fixed at _ (2560 x ]920). • Digital zoom is not available. lie, the indicator for the current setting is displayed in At settings other than Sin( the monitor (1_[_8). _3P

16 is selected, flash is disabled, Focus, exposure, and white balance are fixed at the values determined with the first picture in each series. • The frame rate with continuous shooting may vary depending upon the current image mode setting, the memory card used, or shooting condition, • There are functions with which this setting cannot be enabled. See "Features That Cannot Be Applied Simultaneously" (_ 63) for more information, Note on BSS BSS may not produce the desired results if the subject moves or the corn position changes while the shutter release button is held down. _1_ Note on Multi-shot 16 Smear (_):- 5) visible in the monitor when shooting with Multi-shot 16 enabled will be recorded with pictures, Avoiding bright objects such as the sun, reflections of the sun, and electric lights when shooting with Multi-shot 16 enabled is recommended. B" p_ n o

Mode) ISO Sensitivity In the i_1 nqode -_ MENU button -_ i_1 tab -_ ISO (auto) shooting screen sensitivity The higher the sensitivity, the less light is needed to expose an picture, allowing capturing darker subjects. Also, a higher sensitivity allows higher shutter speeds, resulting in the picture with less camera shake and subject blur in comparison to the same subject taken under the same brightness. • Although high ISO sensitivity settings are suited to pictures of subjects taken under dim lighting, those taken without flash, or those taken at telephoto setting, high sensitivity settings are often associated with "noise" randomly spaced, brightly colored pixels concentrated in dark portions of pictures. Option " . . i.... Descn ptlon Sensitivity is ISO80 when there is sufficient lighting, the Auto (default setting) camera compensates by raising sensitivity to a maximum of ISO 800 when lighting is dim. Choose the range in which the camera automatically adjusts ISO sensitivity, from ISO 80-200 (default setting) or ISO 80- Fixed range auto 400. The camera will not increase sensitivity beyond the maximum value in the selected range. Specify the maximum ISO sensitivity for effective control over the amount of "grain" that appears in pictures. 80, 100, 200, 400, 800, 1600, 3200, 6400 The current ISO sensitivit • If Auto is selected and displayed ([_ 8). Sensitivity is locked at the specified value. setting is indicated byan icon when shooting ([_ 8). the sensitivity is raised above ISO80, the _ icon will be • When Fixed range auto isselected, _ and the maximum value of ISO sensitivity isdisplayed. _1_ Notes on ISO sensitivity • There are functions with which this setting cannot be enabled. See "Features That Cannot Be Applied Simultaneously" (_ 63) for more information, • Motion detection (_ 68) does not function when the ISO sensitivity is set to any setting other than Auto. _1_ Notes on ISO Sensitivity 3200 and 6400 • When ISO sensitivity is set to 3200 or 6400, Image mode settings are limited to _'_ 2048×1536, [] 1024x768, and _ 640×480, • When ISO sensitivity is set to 3200 or 6400, the image mode icon is dispbyed in red during shooting. t_ _41

In the i_1 mode -)' MENUbutton -)' i_1 tab -)' AF mode (auto) shooting screen area Use this option to determine how the camera selects the focus area for autofocus. _?=_,=,w_,_=77_ _=_ ............. Option Description When tile camera detects a human c:_ face, it focuses on that face. See "Face Detection" (_ 65) for more information. If more than one face is detected, the camera focuses on the [_-] Face priority face closest to the camera. When (default setting) taking pictures of subjects other than people, or framing a subject with which no face is detected, the AF area mode setting switches to Auto, and the camera automatically selects the focus area (up to nine areas) containing the subject closest to the camera and focus on it. The camera automatically selects the focus area (up to nine areas) containing the subject closest to the camera and focus on it. Pressthe [11]Auto shutter release button halfway to activate the focus area. When the shutter release button is pressed halfway, the focus area (up to nine areas) selected by the camera will be Focus area displayed in the monitor. Focus area _42

Mode) _,_,w_,_,_ o_-_ Option Description [_:_]Manual [=] Center Subject tracking Select one of gg focus areas displayed in the monitor.This option issuited to situations in which the intended subject is relatively still and not _osidoned in the center of the frame. Press the muki selector A, V, _, or • to move the focus area to the _osRion where you want to focus, and then shoot. • Before making any of the settings below, press the _}_ button to cancel the focus-area selection. Flash mode Focus area Selectable focus area Macro mode, self-timer, or exposure compensation When the settings are complete, press the _) button again to reactivate the focus area selection. The camera focuses on the subject at the center of the frame. The center focus area is always displayed. Use this function to take pictures of moving subjects. Register the subject on which the camera will focus. The focus area will automatically move to track the subject. See "Using Subject Tracking" (_ 44) for more information. Focusarea _1_ Notes on AF Area Mode • When digital zoom is in effect, focus will be on the center of tile screen regardless of tile AF area mode setting. • Autofocus may not perform as expected (_ 31). • There are functions with which this setting cannot be enabled. See "Features That Cannot Be Applied Simultaneously" (_ 63) for more information. _43

(auto) mode shooting screen -) MENUbutton -) i_1 tab -) AF area mode -,) Subject tracking Use ttqis function to take pictures of moving subjects. Wiqen a subject is registered, the camera automatically moves the focus area to track the subject. I Register a subject. I_ _ • When the white border isdisplayed at the center ofthe screen, align the subject with the border and press the ® button. Whenthe borderg ows red,thecamera isunab eto foc us on the subject. Change the composition and try to register the subject again. displayed on that subject and the camera begins tracking that subject. To deregister the subject, press the ® button. If the camera cannot track the registered subject anymore, the focus area will disappear and the registration will be canceled. Register the subject again. 2 Pressthe shutter-release button all the way down to take a picture. • The camera focuses on the focus area when the shutter-release button is pressed haFway. The focus area will glow green and focus will be locked. • If the focus area is not displayed when the shutter- _ r release button is pressed halfway, the camera focuses on the subject at the center of the frame. _1_ Notes on Subject Tracking Mode • Adjust zoom position, exposure, flash mode, and menu settings prior to registering the subject. • Subject tracking may not be possible in certain shooting conditions. • Digital zoom is not available. _44

Mode) Autofocus Mode In the I_ nqode -_ MENUbutton -_ I_ tab -_ Autofocus mode (auto) shooting screen Choose how the camera focuses. Option ° Description AF-S Single AF The camera focuses when the shutter-release button is (default setting) pressed haffvvay. The camera focuses continuously until the shutter release button is pressed clown haffvvay. Use with moving subjects. AF-F Full-time AF The sound of lens drive movement will be heard while the camera focuses. £ t_ £. [] Autofocus Mode for Movie Recording Autofocus mode for movie recording car/be set with Autofocus mode (_ 58) in the movie menu _45

Order) button -)' Playback menu -.) _3, Print order When printing pictures stored on the memory card using any of the following methods, the Print order option in the playback menu is used to create digital "print orders" for printing on DPOF compatible devices. • Inserting tile memory card into a DPOF compatible (_)i- 18) printer's card slot. • Taking tile memory card to a digital photo Jab. • Connecting tile camera to a PictBridge compatible (_)i- 18) printer (_ 22). A print order can also be created for pictures stored in tile internal memory if tile memory card is removed from tile camera. 1 Use the multi selector to choose _:_ Print order and press the _) button. • Proceed to step 3 when playing back in favorite pictures mode, auto sort mode, or list by date mode. 2 Choose Select images and press the _) button. _46

_ or i_ to select pictures, and press • or • to specify the number of copies to be printed. • Picture selected for printing can be recognized by the check marl< (e_) icon and the numeral indicating the number of copies to be printed. If no copies have been specified for pictures, the selection is canceled. • Rotate the zoom control to T (O_)to switch to full frame playback. Rotate the zoom control to W (_i_) to switch back to 12-thumbnail display. • Pressthe _) button when setting iscomplete. 4 Choosewhetherornotto print shooting date and photo information. • Choose Date and press the _) button to print the shooting date on all pictures in the print order. • Choose Info and press the _) button to print shutter speed and aperture value information on all pictures in the print order. • Choose Done and press the _) button to complete the print order and exit. Pictures selected for printing are recognized by the icon displayed with playback. ®,,_f,_,,_,_ 4" _47

mode, the screen shown below is displayed if pictures other than those in the selected album, or category, or taken on the selected shooting date, have been marked for printing, • Select Yes to mark the selected pictures for printing without changing the marking of other pictures, • Select No to remove print marking from previously marked pictures and restrict the )rint order to pictures in the selected album or category, or taken on the selected shooting date, Favorite pictures mode/ auto sort mode List by date mode If the total number of marked pictures exceeds 99 as a result of adding the current print order setting, the screen shown below will be displayed. • Select Yes to remove print marking previously added from the print order and restrict the print order to pictures just marked. • Select Cancel to cancel the settings that were just added without changing the print marking for previously marked pictures. p_ m o _48 Favorite pictures mode/ auto sort mode List by date mode

order option, shooting date and photo information are printed on pictures when a DPOF compatible (_):- 18) printer which supports printing of shooting date and photo information is used. • Photo information cannot be printed when the camera is connected directly to a printer, via the included USB cable, for DPOF printing (_ 28). • Note that Date and Info settings are reset when the Print order option is displayed, • The date printed is that recorded when the picture was taken, Changing the camera' s date using the Time zone and date option in the setup menu after a picture has been taken has no effect on the date printed on the picture. [] Canceling Existing Print Order Select Delete print order in step 2 of"/_, Print Order (Creating a DPOF Print Order)" (_ 46) and press the _) button to remove print marking from all pictures and cancel the print order. [] Print Date When date and time of recording are imprinted on pictures using the Print date option (_ 66) in the setup menu, pictures are recorded with shooting date and time imprinted on the picture when they are taken, Pictures with the date imprinted on them can be printed from printers that do not support printing of the date on pictures. Only the date and time imprinted on pictures using the print date option will be printed, even if the date print option is enabled in the Print order menu. t_ _4P

-_ _ Slide show Play back pictures stored in the internal memory or on a memory card one by one in an automated "slide show." I Use the multi selector to choose Start and press the _) button. • See "Slide Show Options" (_ 51) for more information. • To repeat the slide show automatically, choose loop and press the _) button before choosing Start. The check mark (_j') will be added to the loop option when enabled. 2 The slide show begins. • While the slide show is in progress, press the multi selector • to display the subsequent picture or • to display the previous picture. Hold down either button to fast forward or rewind. • To end or pause slide show, press the _}_ button. • During a slide show with Background music, the volume can be adjusted by rotating zoom control to T or W. 3 End the slide show or restart it. ,_< • The screen shown on the right is displayed when the slide show has ended or is paused. To return to the playback menu, use the multi selector • or • to select I11 and then press the 0 button.To resume the slide show, use the multi selector • or • to select IMI _50

each setting. Effects Select from Classic (default setting), Zoom, Fade in, Selective color, Random flow, or Frosted glass. Background music Select from Up-tempo, Moderate tempo, Slow tempo, or None (default setting). Frame intvl Specify the length of time a picture isdisplayed. Default setting is3 s. When Manual advance only is selected, the displayed pictures do not advance automatically. The displayed picture can be switched only by pressing the • or • button. Use this setting to manually switch the pictures in slide shows using transition effects or background music. t_ L_ Notes on Slide Show • Only the first frame of movies (_ 94) included in aslide show is displayed. • When using the Rechargeable Li ion Battery EN ELI 2, the maximum playback time is about 60 minutes, even if Loop is enabled (_ 70). • When Effects isset to Random flow, you cannot change the displayed picture by pressing the multi selector • or _ during slide show. When Frame intvl isset to Manual advance only, the length of time isequivalent to 2 s. [] Operate the Remote Control ML-LS (Available Separately) to Project Slide Show See"_ Projecting Slide Shows" (_ 86) for more information,

O_a Protect button -)' Playbackmenu --)0,,! Protect Protect selected pictures from accidental deletion. Select pictures to protect or cancel protection for previously protected pictures from the picture selection screen. See "Selecting Pictures" (_ 53). Note that formatting the camera's internal memory or the memory card will permanently delete protected files (_ 71). Protected pictures are recognized by the @_ icon ([_ 9). m o _52

Follow the procedures described below to choose the pictures. 1 Press the multi selector _ or i_ to choose the desired picture. • Rotate the zoom control (_] 2) to T (q) to switch to fullframe playback or W ([]) to switch back to 12 thumbnail display. • Only one picture can be selected at a time for Rotate image and Welcome screen. Proceed to step 3. 2 Press• or • to select or deselect (or to specify the number of copies). • When a picture is selected, a check mark (_) is 4" displayed with the picture. Repeat steps ] and 2 to select additional pictures. 3 Press the I_) button to finalize selection. _ • When Selected images is selected, a confirmation dialog is displayed. Follow the instructions displayed in the monitor. _$3

--) _ Rotate image Specify the orientation in which recorded pictures are displayed with playback. Still pictures can be rotated 90 degrees clockwise or 90 degrees counterclockwise. Pictures that were recorded in portrait ("tall") orientation can be rotated up to 180 degrees in either direction. Select a picture in the picture selection screen (_ 53). When the rotate image screen is displayed, press the multi selector _ or _" to rotate the picture 90 degrees. Rotate 90 degrees Rotate 90 degrees counterclockwise clockwise m o Press the _) button to finalize display orientation, and save orientation data with the picture. _54

to record voice memos for pictures. • When playing back an image with no voice memo attached, the screen changes to the recording screen. When playing back an image with a voice memo attached (indicated by the _ icon in full frame), the screen changes to the voice memo playback screen. Recording Voice Memos • A voice memo of up to 20 seconds carl be recorded while tile _) button is pressed. • Do not touch tile built in microphone during recording. • During recording, _ and _ blink in tile monitor. • When recording ends, the voice memo playback screen isdisplayed. Playing Voice Memos • Press the _) button to play the voice memo. • Press the _) button again to stop playback. • Rotate the zoom control to T or W during playback to adjust playback volume. • Press tile multi selector _ before or after playing back a voice memo to return to the playback menu. Press tile MENUbutton to exit tile playback menu. s" s ,8 _55

Press tile mt.llti selector • or • to choose Yes and press tile _) button. Only tile voice memo will be deletd. 2_ n o _1_ Notes on Voice Memos • When a picture with a voice memo attached is deleted, both the picture and its voice memo are deleted. • Voice memos cannot be deleted from protected images. • Ifa voice memo already exists for the current picture, it must be deleted before a new voice memo can be recorded. • The COOLPIX $1200pj is not able to record a voice memo for pictures taken with another make or model of digital camera. [] More Information See 'Image/Sound File and Folder Names" (_ 80) for more information. _56

[] button (playback mode) -) MENU button -) Playback menu --) _ Copy Copy pictures between the internal memory and a memory card. 1 Use the multi selector to select an option from the copy screen and press the _) button. • I_1 _1, L_:Copy pictures from internal memory to memory card. • l_l _1_1: Copy pictures from memory card to internal memory. 2 Select a copy option and press the _) button. • Selected images: Copy pictures selected from the picture selection screen (_'_ 53). • All images: Copy all pictures. _1_ Notes on Copying Pictures JPEG, MOV, and WAV _rmat files can be copied. Files recorded in any other _rmat cannot be copied. if voice memos (_'_ 55) are attached to pictures selected for copying, voice memos are copied with the pictures. Operation is not guaranteed with pictures taken with another make of camera or that have been modified on a computer, When copying pictures selected for a Print order (_'_ 46), the print marking is not copied. However, Protect (_'_ 52) settings are copied with pictures. Pictures or movies copied from the internal memory or a memory card cannot be displayed in auto sort mode (_'_ 7), When pictures added to albums (_'B 4) are copied, the copies are not automatically added to the same albums as the original pictures. 4" [] "Memory contains no images." Message If there are no pictures stored on the memory card when playback mode is applied, the message Memory contains no images, will be displayed, Press the MENUbutton to display the copy option screen, and copy the pictures stored in the camera's internal memory to the memory card. [] More Information See 'Image/Sound File and Folder Names" (_ 80) for more information. _57

(default setting) ,_,_'_oiFrame 540 (g60x540) Z VGA (640x480) Description Movies with an aspect ratio of 16:9 are recorded. • Movie bit rate: 9.0 Mbps Movies with an aspect ratio of 16:9 are recorded. A format supported by Apple Inc. • Movie bit rate: 24 Mbps Movies cannot be edited (_ 34). When recording movies to the internal memory, recording may stop unexpectedly in some shooting conditions. When recording movies of important events, recording to a memory card (class .6 or higher) is recommended. Movies with an aspect ratio of 4:3 are recorded. • Movie bit rate: 3.0 Mbps • The frame rate isapproximately 30 frames per second in any options. • See page 92 for more information about maximum movie length. [] Image File Names and Folder Names See"image/Sound File and FokJerNames" (_ 80) for more information. Autofocus Mode In the _ MENUbutton _ _ tab _ Autofocus mode shooting screen Select the autofocus method used when recording normal speed movies. Option " Description _F-S Single AF (default Focus islocked when the • (_ movie record) button ispressed to start recording. Select this option when the distance between setting) the camera and the subject will remain fairly consistent. Camera focuses continuously during movie recording. Select this option when the distance between the camera and AF-FFull-time AF subject will change significantly during recording. To prevent sound of camera focusing from interfering with recording, use of Single AF is recommended _58

shooting screen light Enable or disable the movie light, which is used to illuminate dimly lit subjects when recording movies. Wind Noise Reduction In the -) MENUbutton -) _ tab -) Wind noise reduction shooting screen Select whether wind noise is reduced when recording normal speed movies. Option Description Records while minimizing the noise of wind blowing on the _ On (default setting) microphone. Suitable for recording in strong winds. During playback, not only wind noise, but other sounds may also become difficult to hear. OFFOff Wind noise is not reduced. When the wind noise reduction setting is enabled, the current setting is displayed during shooting ([_[_ 8). When Off is selected, an icon for the current setting is not displayed. Enhanced Resolution in the -)' MENUbutton -)' Jl_ tab -)' Enhanced resolution shooting screen Set whether or not to enhance the resolution during movie recording. 4" £ When changes in the brightness of the subject are severe, selecting Off may be appropriate. Change the setting and experiment to find the ideal setting for each situation. _59

or playback mode without displaying setting) the welcome screen. The camera displays a welcome screen and enters shooting or COOLPIX playback mode. Select an image Displays a picture selected for the welcome screen. When the _icture selection screen is displayed, select a picture (_ 53) and _ress 0 button. • As the selected picture isstored by the camera, it will be displayed when the camera is turned on even if the original picture is deleted. • Pictures taken at an Image mode (_ .61)setting of 4224x2376, and copies created at a size of 320 x 240 or smaller using the small picture (_ 18) or crop (_ 19) function, cannot be used. m o _60

and date zone Set the camera clock. option " Description Set camera clock to current date and time. Use the multi selector to set the date and time in the displayed screen. • Select afield: Press • or • (the Date and time highlight switches between D, M, Y, hour, and minute). • Edit the highlighted field: Press • or_ I'. • Apply the settings: Select the minute field and press the _) button. Select the order in which the day, month, and year are displayed Date format from Year/Month/Day, Month/Day/Year, and Day/Month/Year. _" Home time zone can be specified and daylight saving enabled or disabled from time zone options. When Travel destination (:_I-) Time zone is selected, local time (_ 63) isautomatically calculated and date and time in the selected region are recorded with pictures. Useful when traveling. Selecting Travel Destination Time Zone 1 Use the multi selector to choose Time zone and press the _}_ button. • TheTime zone screenisdisplayed. 2 Choose _ Travel destination and press the button. • The date and time dispJayed in the monitor changes according to the region currently selected. _61

screen is displayed. 4 Press _ or i_ to choose the travel destination time zone. • Press • in a time zone where daylight saving is in effect to enable the daylight saving time function and automatically advance the time by one hour. The % icon will be displayed at the top of the monitor. Press • to disable the daylight saving time function. • Press the _) button to choose the travel destination time zone. • While the travel destination time zone is selected, the icon will be displayed in the monitor when the camera is in shooting mode. [] _" Home Time Zone • To switch to the home time zone, choose _ Home time zone in step 2 and press the _ button. • To change the hot'he time zone, d/oose _ Home time zone in step 2 and complete steps 3 and [] Daylight Saving Time When daylight saving time starts or ends, turn the daylight saving time function on or off from the time zone selection screen displayed in step 4. [] Imprinting the Date on Pictures Enable the Print date option (_'_ 66/in the setup menu after the date and time have been set. When the Print date option is enabled, pictures will be recorded with shooting date imprinted on them. _62

clock to local time from the Date and time option, UTC ÷/- Location UTC ÷/- Location ] I Midway, Samoa 10 Hawaii, Tahid 9 Alaska, Anchorage PST (PDT): Los Angeles, Seattle, 8 Vancouver 7 MST (MDT): Denver, Phoenix 6 CST (CDT): Chicago, Houston, Mexico City S EST (EDT): New York, Toronto, Lima 4.5 Caracas 4 Manaus 3 Buenos Aires, Sao Paulo 2 Fernando de Noronha 1 Azores ±0 London, Casablanca +1 +2 +3 +4 +5 +5,5 +6 +7 +8 +9 +10 +11 +12 Athens, Helsinki, Ankara Moscow, Nairobi, Riyadh, Kuwait, Manama Abu Dhabi, Dubai Islamabad, Karachi New Delhi Colombo, Dhaka Bangkok, Jakarta BeUing,Hong Kong, Singapore Tokyo, Seoul Sydney, Guam New Caledonia Auckland, Fiji s £

settings Set the options below. Option " Description Choose information displayed in the monitor during shooting Photo info and playback mode. On (default setting): Picture is automatically displayed in the monitor immediately after it istaken and the monitor display Image review* returns to shooting mode. Off: Picture is not displayed after it is taken. Choose from five settings for monitor brightness. The default Brightness* setting is3. * When projecting pictures or movies, the camera cannot be set Image review, or Brightness. Photo Info Select whether or not the photo information is ctisplayect in the monitor. See"TheMonitor" (I]_ 8) for information on indicatorsdisplayedin the monitor. Shooting mode Playback mode Show info Auto info (default setting) Hide info Current settings and operational guides are displayed as in Show info above. If no operations are performed for a few seconds, the display will be the same as Hide info. Information will be displayed again when the next operation is performed. _64

grid is displayed as a reference for framing a picture. The grid is not displayed when recording movies. In addition to information shown with Auto info, a frame indicating the area captured in the recorded movie is displayed before recording starts. This information isnot displayed when the shutter-release button is pressed halfway or when a movie is being recorded. Playback mo_ ...... The current settings or operation guide is displayed, as in Auto info. The current settings or operation guide isdisplayed, as in Auto info. Projector Settings MENUbutton @ V tab Projector settings Power saving mode offers automatic adjustment of projection brightness to save power. Option iii Description On: Enable power saving mode. Projection may appear slightly darker than when Off is selected. Power saving Off (default setting): Power saving mode is disabled. When the battery is low, the camera automatically adjusts projection brightness to save power even when Off isselected. 4" t_ _55

on the pictures with shooting, allowing the information to be printed even from printers that do not support date printing (_ 49). The current print date setting can be confirmed in the camera monitor with shooting ([_[_ 8). When Off is selected, no icon is displayed. S" s n o L_ Notes on Print Date • Imprinted dates form a permanent part of image data and cannot be deleted. The date and time cannot be imprinted on pictures after they have been taken, • The date cannot be imprinted in the following situations; When using Sports, Museum, or Panorama assist, or When Continuous is selected for the Pet portrait scene mode When On is selected for Blink proof (_'_ 36) in smart portrait mode. When Continuous or BSS is selected for the continuous setting (_'_ 39), When shooting movies • Dates imprinted at an Image mode setting (_ 61) of_ 640x480 may be difficult to read. Choose [] 1024x768 or larger when using the Print date option, • The date is recorded using the format selected in the setup menu's Time zone and (late item [] Print Date and Print Order If using a DPOF compatible printer that supports the printing of shooting date and photo information, it is possible to use the Print order option (_'_ 46) to print such information even on pictures that were not taken using the Print date option,

reduction option for shooting. Vibration reduction reduces blur, caused by slight hand movement known as camera shake, which commonly occurs when shooting with telephoto zoom applied or at slow shutter speeds. The effects of camera shake are reduced when recording movies, in addition to when taking still pictures. Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting. Option Description The effects of camera shake are reduced optically only using a lens shift method. Additional image processing with electronic vibration reduction is applied to further reduce the effects of camera shake with recording of still pictures taken under the On (hybrid) following conditions. • when flash is disabled. • when a shutter speed slower than 1/.60 seconds is used. • when Self-timer is disabled. • when Single is selected for the Continuous setting. • when ISO sensitivity is set to 200 or less. Lens shift method vibration reduction reduces the effects of On (default setting) camera shake. OFF off Vibration reduction is disabled. The current vibration reduction setting can be confirmed in the camera monitor with shooting ([_ 8). When Off is selected, no icon isdisplayed. Notes on Vibration Reduction • Vibration reduction may take a few seconds to activate after the power is turned on, or the camera enters shooting mode from playback mode. Wait until the picture of the monitor stabilizes before shooting, • Due to characteristics of the vibration reduction function, pictures displayed in the camera's monitor immediately after shooting may be displayed blurry, • Vibration reduction may be unable to completely eliminate the effects of camera shake in some situations. • image processing with electronic vibration reduction may not perform as expected with very slight or extreme camera shake, even when On (hybrid} is selected, • image processing with electronic vibration reduction is not enabled at fast or extremely slow shutter speeds, even when On {hybrid} is selected, • When On (hybrid} is selected and electronic vibration reduction is activated, the shutter is automatically released twice when a picture is taken to allow for image processing, Therefore, the time required to record pictures increases, Shutter sound (_ 70) can be heard only when the shutter is released the first time and a single picture will be recorded, S" s £ t_ _67

detection Enable motion detection to reduce the effects of subject movement and camera shake when shooting still pictures. Option Description When the camera detects subject movement or camera shake, the ISO sensitivity and shutter speed are automatically increased to reduce blurring. However, motion detection does not function in the following situations. • When the flash fires. • When Sports, Night portrait, Dusk/dawn, Night _'_ Auto (default setting) landscape, Museum, Fireworks show, Backlighting, or Pet portrait scene mode is enabled. • When ISO sensitivity (_ 41) is set to Fixed range auto, or ISO sensitivity isfixed at a particular value in i_1 (auto) mode. • In i_1 (auto) mode, when Multi-shot 16 (_ 39)is enabled. • When AF area mode (_ 42) is set to Subject tracking in I_ (auto) mode • When shooting movies OFFOff Motion detection is not enabled. The current motion detection setting can be confirmed in the camera monitor S" $ with shooting ([_ 8). The motion detection icon turns green when the camera R detects camera shake and increases shutter speed. When Off is selected, no icon is displayed. m o L_ Notes on Motion Detection • Modon detection may be unable to completely eliminate the effects of subject movement and camera shake in some situations. • Motion detection may not function if the subject exhibits significant movement or is too dark. • The pictures taken using motion detection may be somewhat "grainy" in appearance, _68

Enable or disable AF assist illumination, which assists autofocus operation when the subject is poorly lit. Option Description AF-assist illumination is used to assist the focus operation when the subject is poorly lit. The illuminator has a range of about 4.5 m (14 ft) at the maximum wide-angle position and Auto (default setting) about 3.0 m (9ft 10 in.) at the maximum telephoto position. Note that for some scene modes such as Museum (_ 43) or Pet portrait ([_Q 45) scene mode, or focus areas, the AF-assist illuminator may not light even when Auto is selected. AF-assist illuminator does not light up. The camera may be Off unable to focus under dim lighting. Digital Zoom MENUbutton -) V tab Digital zoom Enable or disable digital zoom. When the camera is zoomed in to the maximum optical zoom On (default setting) _position, rotating the zoom control to T (% triggers digital Off / Digital zoom will not be activated (except during movie l recording). Notes on Digital Zoom • When d ig ital zoom is used, the camera _cuses at the center of the fra me regard less of the AF area mode setting, • Digital zoom cannot be used in the following situations, When Portrait, Night portrait, Night landscape, or Pet portrait scene mode is selected When smart portrait mode is selected When Continuous is set to Multi-shot 16 (_ 39) When AF area mode (_ 42) is set to Subject tracking in auto mode _69

Adjust the following sound settings. Option Ill Description Select On (default setting) or Off. When On is selected, a beep will sound once when operations are completed successfully, Button sound twice when the camera acquires focus on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on. Select On (default setting) or Off. No sound is played with shutter release when some features such as continuous Shutter sound shooting or BSS(best shot selector) are enabled, or recording movies, even if On is selected. _1_ Notes on Sound Settings • In Pet portrait scene mode, button and shutter sounds are disabled. • The button sound isnot generated when the projector is in operation, Auto Off MENU button -'_ V tab -_ Auto off When the camera is on and a period of time passes without any operations having been performed, the monitor will be turned offand the camera will enter standby mode ([_ 23) to save power. In this option, set the time allowed to elapse before rD the camera enters standby mode. 30 s, 1 min (default setting), S rain, and 30min _. can be selected. o [] When the Monitor Turns off for the Power Saving Function • Power on lamp blinks in standby mode. • Camera turns off after three minutes passes in standby mode. • To reactivate the monitor while the power on lamp is blinking, press any of the following buttons: Power switch, shutter release button, I_1 button, [] button or • (_ movie record) button • See "Auto Offwith Projection" (_ 82) for more information. [] Auto Off Settings The time allowed to elapse be_ the camera enters standby mode is fixed in the _llowing situations: • When a menu is displayed: three minutes • During slide show playback: up to 60 minutes {when using the Rechargeable Li ion Battery EN EL12) • When the AC adapter EH 62F is connected: 30 minutes _70

Formatting the internal memory or memory cards permanently deletes all data. Data that []as been deleted cannot be restored. Be sure to transfer important pictures to a computer before formatting. Formatting the Internal Memory To format tile internal memory, remove tile memory card from the camera. The Format memory option is displayed in the setup menu. Formatting a Memory Card When the memory card isinserted in the camera, the Format card option is displayed in the setup menu. S" s £ t_ Formatting Internal Memory and Memory Cards • Formatting the internal memory or memory card restores album icon settings (_ 6) to the default setting (displayed as number). • Do not turn the camera off, or open the battery chamber/memory card slot cover during formatting. • The first time you insert a memory card that has been used in another device into this camera, be sure to format it with this camera.

_e_tina Czech Dansk Danish Deutsch German English default setting) Espa_ol Spanish EAArlvIK_ Greek Fran_;ais French Russian Rom&n_ Romanian Finnish 'Swedish ..... _o_u_ ........ Ti_nq Vi_t Vietnamese Tiirkr_e Turkish Ukrainian Arabic indonesia i Indonesian _ Italian Simplified Chinese Magyar Hungarian _J@:_ Traditional Chinese _o_ ....... o_._,_ .................................................................... Nederlands Dutch EI;_ Japanese Norwegian Korean PoJski Polish : Thai Portugu_s (BR) Brazilian Portuguese %'-e4f Hindi Portugu_s (PT) Portuguese _72

Adjust settings necessary for connection to computer or television. Option " Description Select the communication method used when the camera is connected to a computer or printer. • MTP/PTP(default setting): Select when transferring pictures USB from the camera to the computer ([_ 75), or when connecting the camera to the printer (_ 72, _ 23). • Projector: Select when using the built-in projector to project the computer display. Video mode Adjust video mode settings for connection to a television. Select from NTSC and PAL. Charge by Computer MENUbutton -'_ V tab -_ Charge by computer Choose whether or not the battery inserted in the camera is charged when the camera is connected to a computer via USB cable. / When the camera is connected to a computer that is running, Auto (default setting) _the battery inserted into the camera isautomatically charged 1 t£r Off / The battery inserted into the camera is not charged when the l camera is connected to a computer. _1_ Notes on Connecting the Camera to a Printer • The battery cannot be charged with connection to a printer, even if the printer complies with the PictBridge standard. • When Auto is selected for Charge by computer, it may be impossible to print pictures with direct connection of the camera to some printers, if the PictBridge startup screen is not displayed in the monitor after the camera is connected to a printer and turned on, turn the camera off and disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the printer, _73

be transferred, when the camera is connected to a computer before the camera' s display language and date and time have been set (_ 24). If the camera's clock battery (_ 25) has been exhausted, the date and time must be reset before the battery can be charged or pictures can be transferred with connection to a computer. In this case, use the Charging AC Adapter EH 69P (_ 18) to charge the battery and then set the ca mera's date and time, • If the camera is turned off, charging will also stop. • If a computer enters sleep mode while charging, charging will stop and the camera may be turned off. • When disconnecting the camera from a computer, turn the camera off and then disconnect the USB ca ble. • It takes about 5 hours to charge a fully exhausted battery, Charging time increases when pictures are transferred while the battery is charging. • When the camera is connected to a computer, an application installed on the computer, such as Nikon Transfer 2, may start. If the camera was connected to the computer for the sole purpose of charging the battery, exit the application. • The camera turns off automatically if there is no communication with the computer for 30 minutes after the battery has finished charging, • Depending upon computer specifications, settings, and power supply and allocation, it may be impossible to charge the battery inserted into the camera via computer connection, [] Charge Lamp The following chart explains charge lamp status when the camera is connected to a computer, Charge lamp Description Blinks slowly (green) Battery charging, Battery not charging. When the charge lamp changes from slow blinking (green) to off while the power on lamp is lit, charging is complete. _°_'_°_ _ • The ambient temperature is not suited to charging. Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F). • A USB cable is not correctly connected or the battery is faulty, Flickers (green) Reconnect the USB ca ble correctly or replace the battery, • Computer is in sleep mode and does not supply power. Reboot the computer. • The battery cannot be charged because the computer' s specifications or settings do not support power supply to the camera. _74

Specify whether or not the camera detects human subjects that have blinked when shooting with face detection ([_ 65)in the following modes. • When I_ (easy auto) mode is selected. • Portrait ([_ 40), or Night portrait ([_ 41) is selected for the scene mode. • I_1 (auto) mode (when Face priority (_ 42) is selected for AF area mode option). Option Description When the camera detects that one or more human subjects may have blinked in a picture taken using face detection, the Did someone blink? screen isdisplayed in the monitor. The face of the human subject that may have blinked when the On shutter was released is framed by a yellow border. Should this occur, check the picture and determine whether or not another picture should be taken. See "Operating the Blink Warning Screen" (_ 76) for more information. Off (default setting) Blink warning is not enabled. 4" t_ Note on Blink Warning The blink warning does not fu nction at continuous settings of Continuous, BSS, or Multi-shot 16. _7S

Screen Whentile Did someone blink?screenshown on tile right is displayedin the monitor, the operationsdescribed below are available. If no operations are performed within a few seconds, the camera automatically returns to shooting mode. Option Use Description Enlarge the detected face T (C_) Rotate the zoom controWto T (%. that blinked Switch to full-frame playback W (_1_) Rotate the zoom control to W (_;_). Ifthe camera detects that more than one Select the face to be human subject blinked, press _ or i_ dis olayed _ I_ with display zoomed in to switch to another face. Delete the picture "_ Pressthe "_ button. ® Pressthe _) button or the shutter-release Switch to shooting mode _, button. m o _76

Reset all When Yes is selected, the camera's settings will be restored to their default values. Basic Shooting Functions Scene Mode Smart Portrait Menu :--o!!__,__ Option i _a 4" s k!L ° e , Blink proof (_ 36) _Ofl Shooting Menu Option Default value Image mode ([_ 61) [] 4320×3240 White balance (_'_ 37) Auto Continuous (_'_ 39) SingJe ISO sensitivity (_'_ 41) Auto AF area mode (_'_ 42) Face priority Autofocus mode (_'6 45) SingWeAF _77

64) Auto info Image review (_ 64) i On i.............................................................................................................................. Brightness (_ 64) i 3 Power saving (_ 65) Off Print date (_ 66) Off Vibration reduction (_'_ 67) On Motion detection (_-5 68) Auto AF assist (_'_ 69) Auto Digital zoom (_ 69) On Button sound (_'_ 70) Shutter sound (_'_ 70) A_=uto"off (_'_ 70) _ rain USB (_ 73) MTP/PTP Video mode (_ 73) NTSC Charge by computer (_ 73) Auto Blink warning (_'_ 75) Off _'_78

Numbering will continue from the lowest number available. To reset file numbering to "0001", delete all pictures ([_ 34) before selecting Reset all. • The following menu settings will remain unaffected when menus are reset with Reset all. Shooting menu: Preset manual data (_ 38) acquired for White balance Setup menu: Picture selected for Welcome screen (dl-_ 60), Time zone and date (dl-_ 61 ), Language (dl-_ 72), and Video mode in Interface (dl-_ 73) Firmware Version MENUbutton _ _1I tab _ Firmware version View the current camera firmware version. _79

DSCN0001,JPG I I J[ _ Voice Identifier (not shown on camera monitor) Extension (indicates file format) Original still Pictures (voice Still pictures .JPG memo attachment included)DSCN _Mov!e_=i_:i_,;__u_. MOV and movies memos h _ W A V Small Copies(voice memo qcckl attachment included) ...... Cropped Copies(voice memo Rqckl File number (assignedautomatically in attachment included) .... ascending order, starting with "0001") Copies created using editing functions other than small pictureand crop (voice memo attachment included) and FSCN moviescreated by movie editing function • Files are stored in folders named with a folder number followed by a five character identifier: "P_" plus a three digit sequential number for pictures taken in Panorama assist scene mode (e.g."101P 001"; _ 2) and "NIKON" for all other pictures (e.g. "100NIKON"). When the number of files within a folder reaches 9999, a new folder will be created. File numbers will be assigned automatically starting with "0001." • Voice memo file names have the same identifier and file number as the picture to which the voice memo is attached. • Files copied using Copy>Selected images are copied to the current folder, where they are assigned new file numbers in ascending order starting from the largest file number in memory. Copy>All images copies all folders from the source medium; file names do not change but new folder numbers are assigned in ascending order, starting from the largest folder number on the destination medium (_ 57). • A single folder can hold up to 200 files; if the current folder already contains 200 files, a new folder, named by adding one to the current folder name, will be created the next time a file is stored. If the current folder is numbered 999 and contains 200 files, or a file is numbered 9999, no further files can be stored until the internal memory or memory card isformatted (_ 71), or a new memory card is inserted. _80

battery Charging AC Adapter Charging AC Adapter EH 69P1'2 Battery charger Battery Charger MH 652 AC Adapter EH 62F (connect as shown) iJ 1 AC adapter Be sure that the power connector cord has been properly aligned in )ower connector and battery chamber grooves before closing the battery-cham ber/memory card slot cover. If part of the cord runs out of the grooves, the cover or cord may be damaged when the cover is closed. Audio/video cable Audio Video Cable EG CP16 Remote control Remote Control ML-L5 2 3 ....... 1 Included with the camera at the time of purchase ( * _ ii). 2 When using in other countries, use a plug adapter (available commercially) as necessary. For more information about plug adapters, consult your travel agency. £ _81

solutions for dealing with them. Display Description Solution (blinks) Clock not set. 0 Battery exhausted. Battery exhausted. Battery tern peratu re high Battery temperature is high. (l) The camera will turn The camera has become off to prevent hot. overheating. O There is no signal from No signal. The the connected device. camera will turn off. Close the projector Cover The projector cover is opened. Set date and time. _ 61 Charge or replace the battery. 16, 18 Turn off camera, and allow battery to cool down before resuming use. After five seconds, the monitor will turn offand the power-on lamp will blink rapidly. After the lamps blink for three minutes, the camera will turn off automatically. Pressing the power switch also turns off the camera. The camera turns off automaticaWly. Leave the camera off until it has cooled and then turn it on again. 23 81 Input a signal from the 81 connected device. _O (Q blinks red) Camera cannot focus. 28, 31 68 Camera cannot perform other operations until recording is complete. Write-protect switch is in "lock" position. Close the projector cover To resume projection, close the projector cover, turn the camera offand back on, and open the projector cover. Refocus. Use focus lock. Wait until message clears from display automatically when recording is complete. Slide write protect switch to "write" position. Please wait for the camera to finish recording. O Memory card is write protected. _82

be Use approved card. used. (1) This card cannot be read. Error accessing memory card. Memory card has not been formatted for use in COOLPIX $1200pj. Check that connectors are clean. Confirm that memory card iscorrectly inserted. Formatting deletes all data stored on the memory card. Besure to select No and make copies of any pictures you wish to keep before formatting the memory card. Select Yes and press the _) button to format the memory card. Choose smaller image size. Delete pictures. Insert new memory card. Remove memory card and use internal memory. Format internal memory or memory card. Insert a new memory card, or format internal memory or memory card. The following pictures cannot be registered as welcome screen. Pictures taken at an Image mode setting of 4224x2376 Pictures reduced to 320 × 240 size or smaller with cropping or small picture editing Delete pictures from destination. Remove some pictures from album. Add to other albums. Card is not formatted. Format card? Yes No Out of memory. Image cannot be saved. @ Album is full. No further pictures can be added. Memory card isfull. Error occurred while recording picture. Camera has run out of file numbers. Picture cannot be used for welcome screen. Insufficient space to save a copy. 200 pictures have already been added to album. A voice memo cannot be attached to this file. Sound file cannot be saved. Voice memos cannot be attached to movies. Select a picture taken with COOLPIX $1200pj. 21 20 2O 2O 61 34 2O 21 _71 8O 6O 34 _5 _4 56 s 8 _83

taken. 0 Image cannot be modified. (9 Cannot record movie. 0 Memory contains no Description Solution One or more portrait subjects may have blinked when the _icture was taken. Cannot edit selected _icture. Time out error while recording movie. No pictures in the internal memory or memory card. Check the picture in playback mode. Be sure that the picture meets editing requirements. Movies cannot be edited. Choose memory card with faster write speed. 49 21 21 _57 images. _4 The picture has not _ 5 been added to album. No pictures are Select the category contained in the category selected in containing the sorted _'_ 7 )ictures. auto sort mode. To play back pictures stored in internal memory, remove memory card from the camera. To copy picture from internal memory to memory card, press the MENUbutton. The copy screen will be displayed and pictures in the internal memory can be copied to memory card. Add the picture to album. Choose the album that the picture was added. File cannot be viewed on COOLPIX $1200pj. View file using a computer or the devices used to create or edit this file. _-_ 5O Disable protection. _ 52 File not created with COOLPIX S] 200pj. No pictures available for a slide show. Picture is protected. O File contains no image data. This file cannot be played back. O All images are hidden. O This image cannot be deleted. _84

time zone as home. zone. Turn camera offand then on Lens error again. If error persists, contact 0 Lens error, retailer or Nikon-authorized 22 service representative. (D Error occurred during Turn camera offand Communications communication with _ 23 reconnect USBcable. error printer. Turn camera 01_; remove and Error has occurred in feJnseft battery, and turn System error camera's internal camera on. If error persists, 7 O contact retailer or Nikon- circuitry, authorized service representative. (D/FI, Check printer. After solving the problem, select Resume Printer error: check Printer error, and press the _) button to printer status, resume printing. _ (D/FI, Load the specified paper, Printer error: check Specified size of paper is select Resume and press the not loaded in printer. _) button to resume paper printing? (D/FI, Remove thejammed paper, Paper has jammed in select Resume and press the Printer error: paper the printer. _) button to resume jam printing? (D/FI, Load the specified paper, Printer error: out of No paper is loaded in select Resume and press the _rinter. _) button to resume paper printing? (D/FI" Check ink, select Resume and Printer error: check Ink error, press the 0 button to ink resume printing? Replace ink cartridge, select (D/Fl'Printer error: out of Running out ofinkor ink Resume and press the _) ink cartridge is empty, button to resume printing. _ @4' An error caused by the Select Cancel and press the Printer error: file image file has occurred. _) button to cancel printing. corrupt See the documentation provided with your printer for further guidance and information. t_ _85

Maximizing Camera Life and Performance ................. _',- 2 Memory Cards ............................................................................................................... _- 4 Cleaning .......................................................................................................................... _:)i-5 Storage ............................................................................................................................ _:)i- 5 Troubleshooting ............................................................ _',- 6 Specifications ............................................................... _',- 15 Supported Standards .............................................................................................. _)i- 18 Index ............................................................................. _',- 19 2- z o Q_

enjoyment of this Nikon product, observe the precautions described below in addition to the warnings in "For Your Safety" ([_ vi) when using or storing the device. _1_ Keep Dry The device will be damaged if immersed in water or su_ected to high humidity. _1_ Do Not Drop The product may mal_nction if su _ected to strong shock or vibration. _1_ Handle the Lens and All Moving Parts with Care Do not apply force to the lens, fans cover, monitor, memory card slot or battery chamber. These parts are easily damaged. Applying force to the fans cover could result in camera malfunction or damage to the lens. Should the monitor break, care should be taken to avoid injury caused by broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes or mouth, _1_ Do Not Point the Lens at Strong Light Sources for Extended Periods Avoid pointing the lens at the sun or other strong light sources _r extended periods when using or storing the camera. Intense light may cause deterioration of the CCD image sensor, producing a white blur effect in photographs, _1_ Keep Away from Strong Magnetic Fields Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields, Strong static charge or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage data stored on the memory card, or affect the product's internal circuitry. _1_ Avoid Sudden Changes in Temperature Sudden changes in temperature, such as when entering or leaving a heated building on a cold day, can cause condensation to form inside the device, To prevent condensation, place the device in a carrying case or a plastic bag before exposing it to sudden changes in temperature, _1_ Turn the Product Off Before Removing or Disconnecting the Power Source or Memory Card Do not remove the battery while the product is on, or while pictures are being recorded or deleted. Forcibly cutting power in these circumstances could result in loss of data or in damage to product memory or internal circuitry, _1_ Do Not Leave the Projector Cover Open When the COOLPIX S1200pj Is Not in Use The pr_ected image may become faded or discolored if the projector window is exposed to direct or indirect sunlight or bright electric light for an extended period of time,

[] The Battery • Check the battery level before using the camera and replace or charge the battery if necessary. Do not continue charging once the battery is fully charged as this will result in reduced battery performance. Whenever possible, carry a fully charged spare battery when taking pictures on important occasions. • Do not use the battery at am blent temperatures below 10°C (14°F) or above 40°C (104°F). • Charge the battery indoors with an ambient temperature of 5°C to 35°C (41 °F to 95°F) before use. • When charging the battery inserted into the COOLPIX S1200pj using the Charging AC Adapter EH 69P or a computer, the charge capacity may decrease at ambient temperatures 45 °C to 60 °C (113 °F to 140 °F). The battery is not charged at am blent temperatures below 0 °C (32 °F) or ahove 60 °C (140 °F). • Note that the battery may become hot during use; wait for the battery to cool before charging. Failure to observe these precautions could damage the battery, impair its performance, or prevent it from charging normally. • On cold days, the capacity of batteries tends to decrease. Be sure that the battery is fully charged before heading outside to take pictures in cold weather. Keep spare batteries in a warm place and exchange as necessary. Once warmed, a cold battery may recover some of its charge. • Dirt on the battery terminals can prevent the camera from functioning. Should the battery terminals become dirty, wipe them off with a clean, dry cloth before use. • If the battery will not be used for some time, insert it in the camera and completely exhaust it before removing it for storage. The battery should be stored in a cool location with an ambient tern perature of 15°C to 25°C (59°F to 77°F). Do not store the battery in hot or extremely cold locations. • Always remove the battery from the camera or optional battery charger when it is not being used. When inserted, minute amounts of current flow even when unused, and the battery may become excessively drained and no longer function. Turning the camera on or off while the battery is exhausted can result in reduced battery life. • Recharge the battery at least once every six months and completely exhaust it before returning it to storage. • After removing the battery from the camera or optional battery charger, replace the included terminal cover and store it in a cool place. • A marked drop in the time a fully charged battery retains its charge, when used at room temperature, indicates that the battery needs to be replaced. Purchase a new EN EL12 battery. • Replace the battery when it no longer holds a charge. Used batteries are a valuable resource. Please recycle used batteries in accordance with local regulations. [] Charging AC Adapter Information • The Charging AC Adapter EH 69P is _r use only with compatible devices. Do not use with another make or model of device. • The EH 69P is compatible with AC 100 240 V, 50/60 Hz electrical outlets. When using in other countries, use a plug adapter (available commercially) as necessary. For more information about plug adapters, consult your travel agency. • Do not, under any circumstances, use another make or model of AC adapter other than Charging AC Adapter EH 69P or USB AC adapter. Failure to observe this precaution could result in overheating or in damage to the camera. 2- z o o_

Memory Cards" ([_ 21) for more information about memory cards. • Be sure to follow the precautions described in the documentation included with the memory card. • Do not put labels or stickers on memory cards. • We recommend using the camera to format memory cards that have never been used with the camera. Before using a memory card that was previously used in another device, be sure to use this camera to format the memory card. • Note that formatting permanently deletes allimages and other data on the memory card. Be sure to make copies of any pictures you wish to keep before formatting the memory card. • If the message Card is not formatted. Format card? isdisplayed when the camera isturned on, the memory card must be formatted. If there is data that you do not want to delete, select No. Copy the necessary date to a computer, etc. If you want to format the card, select Yes. The confirmation dialog will be displayed. To start formatting, press the _) button. • Do not perform the following during formatting, while data is being written to or deleted from the memory card, or during data transfer to a computer. Failure to observe this precaution could result in the loss of data or in damage to the camera or memory card: Open the battery chamberJmemory card slot cover to remove/insert the battery or memory card. Turn offthe camera Disconnect the AC adapter • Do not format the memory card using a computer. _t4

Cleaning Avoid touching tile lens/proJector window with your fingers. Recnove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end). To remove Lens fingerprints or other stains that cannot be removed with a blower, wipe the lens/projector window with a soft cloth, using a spiral motion that starts at the center of them and working toward the edges. If this fails, clean them using a cloth lightly dampened with commercial lens cleaner. _,0_, Use a blower to remove dust, dirt or sand, then wipe gently with a soft, dry cloth. After using the camera at the beach or other sandy or dusty Body environment, wipe off any sand, dust or salt with a dry cloth lightly dampened with fresh water and dry thoroughly. Note that foreign matter inside the camera could cause damage not covered by the warranty, Do not use alcohol, thinner, or other volatile chemicals. Storage Turn the camera off when not in use. Be sure that the power on lamp is off before putting the camera away. Remove the battery if the camera will not be used for an extended period. Do not store the camera with naphtha or camphor moth balls, or in any of the following locations: • Next to equipment that produces strong electromagnetic fields, such as televisions or radios • Exposed to temperatures below -10°C (14°F) or above 50°C (122°F) • Placesthat are poorly ventilated or subject to humidity of over dO% To prevent mold or mildew, takethe cameraout of storageat leastoncea month. Turnthe cameraon and releasethe shutter afew timesbefore putting the camera away again. • For storing the battery, follow the precautions in "The Battery" (_):- 3) in "Maximizing Camera Life and Performance". [] Notes on the Monitor • The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic common to all TFT LCD displays, and does not indicate a malfunction. Pictures recorded using the product will not be affected. • White or colored streaks may be visible when bright subjects are framed in the monitor. This phenomenon, known as "smear," occurs when extremely bright light strikes the image sensor; it is characteristic of image sensors and does not indicate a malfunction. Smear may also take the form of partial discoloration in the monitor during shooting. It does not appear in pictures recorded with the camera except in the cases of movies and of pictures recorded with Multi-shot 16 selected for Continuous, When shooting in these modes, we recommend that you avoid bright subjects such as the sun, reflected sunlight, and electric lights. • Pictures in the monitor may be difficult to see under bright lighting. • The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your Nikon authorized service representative. 9_ z o o_ 5- x

fails to function as expected, check the list of common problems below before consulting your retailer or Nikon authorized service representative. Display, Settings and Power Supply Problem CauselSolution [_[_] Confirm all connections. 18 Off is selected for Charge by computer in 100, _ 73 Battery inserted into the camera cannot be charged. Camera cannot be turned on. Camera turns offwithout warning. the setup menu. When charging by connecting the camera to a computer, battery charging stops when the camera isturned off. When charging by connecting the camera to a computer, battery charging stops when the computer is suspended (sleeping), and the camera may turn off. Depending upon computer specifications, settings, and status, it may be impossible to charge the battery inserted into the camera via computer connection. Battery isexhausted. When connecting to an electrical outlet using a Charging AC Adapter, the camera cannot be turned on. Battery isexhausted. Camera has turned off automatically to save power. The camera has become hot due to the heat of the projector. Leave the camera off until it has cooled and then turn it on again. The camera and battery may not work properly at low temperatures. The camera turns off if the Charging AC Adapter is connected while the camera is on. The USBcable connecting the camera to the computer or printer has been disconnected. Reconnect the USB cable. 100, _ 74 100, _ 74 i22 ils 22 23, _ 70 81, _ 82 18 72, _ 23

Date and time of recording are not correct. No indicators displayed in monitor. Print date not available. Date not appearing on pictures even when Print date is enabled. Screen for setting time zone and date isdisplayed when the camera is turned on. Camera settings reset. CauselSolution Camera is off. 23 Battery isexhausted. 22 Standby mode for saving power. Press the 23 power switch, shutter release button, i_1 button, [] button, or • ('_ movie-record) button. When flash lamp blinks red, wait until flash 54 has charged. Camera and computer are connected via 72 USB cable. Camera and TV are connected via audio/ 72, _ 21 video cable. The monitor turns off, while the projector is 80 in operation. Adjust monitor brightness. 98, _ 64 Monitor is dirty. Clean monitor. _1" S If camera clock has not been set, "Date not set" indicator blinks with shooting and movie recording. Pictures and movies recorded before clock isset are dated %0/00/0000 00:00" or "01/01/2011 00:00" respectively. Set the correct time and date from the Time zone and date option in the setup menu. Check camera clock regularly against more 25, _ 61 accurate timepieces and reset as required. Hide info is selected for Photo info. Select Show info. 98, _ 64 Camera clock has not been set. 24, _ 61 The current shooting mode is one that does not support Print date. gg' _ 66 oz Clock battery is exhausted; all settings were restored to their default values. 24, 25 x• _t7

power-on lamp blinks rapidly. Camera becomes hot. Camera does not respond to remote control (available separately) operation. Cause/Solution .... _°_-_[__°- Battery temperature is high. Turn off camera and allow battery to cool down before resuming use. After the lamp blinks for three 23 minutes, the camera will turn offautomaticaHy. Pressing the power switch also turns offthe camera. The camera may become hot when shooting movies for an extended period of time or when the camera is used in a hot area; this is not a malfunction. Battery of the remote control isexhausted. 5 Point the remote control at the infrared 36, 81 receiver on the front or rear of the camera at the distance within approximately 5 m (m ft.). The remote control cannot be used when 47 Smile timer is set to On in smart portrait mode and the camera detects human faces. The shutter may not be released when attempting to use the remote control to take pictures of scenes exhibiting severe backlighting. Electronically Controlled Cameras In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, :3- _. then turn the camera on again. In the event of continued malfunction, contact z your retailer or Nikon authorized service representative. Note that disconnecting o the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem o_ occurred. Data already recorded will not be affected. _78

shutter-release button is pressed. Camera cannotfocus. Pictures are blurred. Streaks of light or partial discoloration are visible in the monitor. Bright specks appear in pictures taken with flash. Flash does not fire. Cause/Solution [_ When camera is in playback mode, press the 6, 10 I1_ button, shutter release button, or • ('_ movie-record) button. When menus are displayed, press the MENU 12 button. Battery isexhausted. 22 When flash lamp blinks, flash is charging. 54 The subject is too close to the camera. Try 38,39,57 shooting with macro mode or in I_ (easy auto) mode or Close-up scene mode. The intended subject is one with which 31 autofocus does not perform well. Select Auto for AF assist in the set up 99, _ 69 menu. Turn camera offand then on again. 23 Use flash. 54 Increase the ISO sensitivity value. 51, _ 41 Enable vibration reduction. 99, _ 67 Use BSS 51,_ 39 Use tripod and self timer. 56 Smear occurs when extremely bright light strikes the image sensor. When shooting with Continuous set to Multi-shot 16 and when _ 40, recording movies, avoiding bright objects, such _i* 5 as the sun, reflections of the sun, and electric lights is recommended. Flash isreflecting off particles in air. Set the flash mode setting to (_) (off). 55 The flash mode is set to (_) (off}. 55 Some scene modes with which the flash 39 does not function is selected. On is selected for Blink proof in smart 49 portrait menu. Another function that restricts flash is 63 enabled. 2- z o x•

be used. Image mode not available. No sound when shutter is released. AF-assist illuminator does not light up. Pictures appear smeared. Colors are unnatural. Randomly spaced bright pixels ("noise") appear in image. Randomly spaced bright pixels ("noise") appear in movies. Digital zoom isset to Off in the setup menu. Digital zoom is not avaiWabWein the following situations. - When Portrait, Night portrait, Night landscape, or Pet portrait scene mode is selected. - When shooting in smart portrait mode. - When Continuous is set to Multi-shot 16. When AF area mode is set to Subject tracking in auto mode Another function that restricts the Image mode option isenabled. Off is selected for Sound settings>Shutter sound in the setup menu. No sound is heard with some shooting modes and settings, even when On is selected. The speaker is blocked. Do not cover the speaker. Off is selected for AF assist in the setup menu. AF-assist @uminator may not light depending on the position of the focus area or the current scene mode, even when Auto is selected. Lens isdirty. Clean lens. White balance does not match light source. Shutter speed istoo slow or ISOsensitivity is high as the subject is dark. Noise can be reduced by: Using flash. Specifying a lower ISO sensitivity setting. When recording movies in dim lighting, the picture may become somewhat "grainy" in appearance. This occurs when the ISO sensitivity increases, and it does not indicate a malfunction. 40,41,45 47 51,_ 39 52, _ 43 61 99,_ 70 3,28 99, _ 69 _ 37 54 51,_41 _10

is set to _ (off). 55 Flash window is blocked. 28 Subject is beyond flash range. 54 Pictures are too dark Adjust exposure compensation. 58 (underexposed). Increase ISOsensitivity. 51, _ 41 Subject is backlR. Select Backlighting scene 44, 55 mode or set the flash mode setting to _ (fill flash). Pictures are too bright (overexposed). Unexpected results when flash set to _> (auto with red eye reduction). Skin tones are not softened. Saving images takes time. Adjust exposure compensation. When taking pictures with _> (auto with red- eye reduction) or fill flash with slow sync and red-eye reduction in Night portrait scene mode, In Camera Red Eye Fix may be applied to areas not affected by red-eye. Use any scene mode other than Night portrait, and change the flash to any setting other than _> (auto with red-eye reduction) and try shooting again. Under some shooting conditions, facial skin tones may not be softened. Use _ (Skin softening) for Glamour retouch in the playback menu for pictures containing more than three faces. It may take more time to save pictures in the following situations. When the noise reduction function is in operation When the flash mode is set to _ (auto with red eye reduction) When the skin softening function is applied while shooting is8 41,55 67, _ 36 71,_ 14 55 40, 41,67, g- z o Q_ _3:11

Cannot zoom in on picture. Cannot record or play back voice memos. Cannot use edit pictures. Pictures not displayed on television. Album icon restored to default settings, or pictures added to album not displayed in favorite pictures mode. Cause/Solution File or folder was overwritten or renamed by computer or other make of camera. Movies recorded by a camera other than the COOLPIX S1200pj cannot be played back. Pictures taken with cameras other than COOLPIX S1200pj may not be enlarged. Hayback zoom cannot be used with movies, small pictures, or pictures that have been cropped to a size of 320 x 240 or smaller. Voice memos cannot be attached to movies. Voice memos cannot be attached to pictures taken with other cameras. Voice memos attached to pictures using another camera cannot be played back on this camera. These options cannot be used with movies. These options cannot be used with pictures taken at an Image mode setting of 4224x2376. Select pictures that support editing functions. Camera is unable to edit pictures taken with other cameras. Select correct Video mode in Interface. Memory card contains no pictures. Replace the memory card. Remove the memory card to play back pictures from the internal memory. Data in the memory card may not be played back correctly if overwritten by a computer. 94 94 i_ss 94 61 100,_ 73 20 _712

mode. Nikon Transfer 2 does not start when camera is connected. The PictBridge startup screen is not displayed when the camera is connected to a printer. Pictures to be printed are not displayed. CauselSolution 70,_ 7 70,_ 8, The desired picture was sorted to a category other than the category currently displayed. Pictures recorded by a camera other than the COOLPIX S1200pj and pictures copied using the copy option cannot be displayed in auto sort mode. Pictures recorded in internal memory or on the memory card may not be played back correctly if overwritten by a computer. Up to 999 pictures and movie files can be added to each category. If the desired category already contains 999 pictures, new pictures or movies cannot be added. Select the Interface setting from the setup menu and set the USB option to MTP/PTP, and try to connect the camera again. Camera is off. Battery isexhausted. USB cable is not properly connected. Camera is not recognized by the computer. Confirm system requirements. Computer is not set to start Nikon Transfer 2 automatically. For more information on Nikon Transfer 2, refer to help information contained in ViewNX 2. Select the Interface setting from the setup menu and set the USB option to MTP/PTP, and try to connect the camera again. With some PictBridge compatible printers, the PictBridge startup screen may not be displayed and it may be impossible to print pictures when Auto isselected for the Charge by computer option in the setup menu. Set the Charge by computer option to Off and reconnect the camera to the printer. Memory card contains no pictures. Replace the memory card. Remove the memory card to print pictures from the internal memory. 70,_ 8 75,100, _'57S 23 22 72 73 73 100,_ 23, 73 72, _ 73 2O 2- z o _._13

with camera. Projected pictures are not sharp. Cause/Solution Paper size cannot be selected from the camera in the following situations, even when printing from a PictBridge-compatible printer: The printer does not support the paper size specified by the camera. The printer automatically selects the paper size. Projector window is dirty. Tile camera is placed too far or too close to tile screen. Adjust tile distance between tile camera and tile screen. Tile picture is out of focus. Adjust tile focus with tile projector focus dial. 72,_25, _26 8O 82 8O r_ _u. 8_ z rD O- _._14

ii iiiiiiiiiii i ,: i i, i ii f/-number Construction Compact digital camera 14.1 million 1/23 in. type CCD; total pixels: approx. 14.48 million 5× optical zoom, NIKKOR lens 5.0 25.0mm (angle of view equivalent to that of 28 140 mm lens in 35mm [135] format) f/3.9 5.8 ] 3 elements in 9 groups Up to 4x (angle of view equivalent to that of approx. 560 mm lens in 35mm [135] format) Combination of lens-shift and electronic VR (still pictures) Lens shift (movies) Frame coverage (shooting mode) Frame coverage (playback mode) File SYStem File formats 7.5 cm G-in.), approx. 460k-dot, TFT LCD with anti-reflection coating, and 5 level brightness adjustment Approx. 98% horizontal and 98% verticaW(compared to actuaW picture) Approx. 100% horizontal and 100% vertical (compared to actual picture) • Internal memory (approx. f)4 MB) SD/SDHC/SDXC memory card DCF, Exif 2.3, and DPOF compliant Still pictures: JPEG Sound files (Voice Memo): WAV Movies: MOV (video: H.264/MPEG 4 AVC, audio: AAC stereo) • 14M (high image quality) [4320 x 3240"k] • 14M [4320x3240] • 8M [3264 × 2448] • 5M [2592 × 1944] • 3M [2048 × 1536] • PC [1024 x 768] • VGA [640 x 480] • 16:9 [4224 x 2376] 2- z o x• _._15

• Auto (auto gain from ISO80 to 800) • Fixed range auto (ISO 80 to 200, 80 to 400) _oSre i Metering 256 segment matrix, center-weighted (digital zoom less than 2×), spot (digital zoom 2× or more) EXPOSUreContro I Programmed auto exposure with motion detection and exposure compensation ( 2.0 to +2.0 EV in steps of 1/3 EV) Mechanical and charge-coupled electronic shutter /,500is 4 s (when scene mode is set to Fireworks show) Electronically-controlled ND filter ( 2 AV) selection Range 2 steps (f/3.9 and f/7.8 [W]) _ t'-ti:mei" ] _] Can be selected from 10 and 2 second duration r .... Ji_-/!flas };: (!SO Sensitivity: Auto) FlashControl Data Transfer Protocol [W]: 0.3 to 4.5 m (1 ft to 14 ft) [T]: 0.5 to 3.5 m (1 ft 8 in. to 11 ft) 7L auto flash with monitor preflashes Hi Speed USB MTP, PTP Can be selected from NTSCand PAL Audio video output/digital I/O (USB),Projector input connector (for Dock Connector Cable) Three-lamp/single panel color sequential system Reflective digital micromirror device (DMD) 13mm f/2.1, manual focus High luminosity LED (1 each of R,G, B) 13 to 152 cm (5 to 60dn.) Approx. 0.26 to 3.1 m (11 in. to 10 f0 Full color (approx. 16.7 million colors) Up to 20 lumens 200:1 VGA Approx. 1 h with EN EL12 battery _._16

English, Finnish, French, German, Greek, Hindi, Hungarian, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese (European and Brazilian), Romanian, Russian,Spanish, Swedish, Thai,Turkish, Ukrainian, Vietnamese One Rechargeable Li ion Battery EN EL12 (included) AC Adapter EH-62F (available separately) Approx. 5 hours (when using Charging AC Adapter EH-69P and when no charge remains) Still pictures2: Approx. 220 shots Movies: Approx. 1 h 40 min (HD 720p (1280x720), the maximum file size for a single movie is 4 GB or the maximum recording time for a single movie is 29 minutes, even when there is sufficient free space on the memory card for longer recording.) /4/,so 222/ Approx. 107.0 x 63.4 x 22.6 mm (4.3 x 2.5 x 0.9 in.) (excluding projections) Approx. 186 g (6.6 oz)(with battery and SD memory card) Tern peratu re O°Cto 40°C (32°F to 104°F) ]: Humidity Less than 85%(no condensation) • Unless otherwise stated, all figures are for a camera with a fully charged Rechargeable Li ion Battery EN EL12 operated at an ambient temperature of 25°C (77°F). 1 Measurement, measuring conditions, and method of notation all comply with ISO 21118. 2 Based on Camera and Imaging Products Association (CIPA) standards for measuring the life of camera batteries. Measured at 23 (+2) °C (73 (+4) °F);zoom adjusted with each shot, flash fired with every other shot, image mode set to [] 4320x3240. Battery life may vary depending on shooting interval and length of time menus and images are displayed. 2- z o D_ x• _._17

projections) _ Approx. 22.5 g (0.5 oz) (excluding terminal cover) Charging AC Adapter EH-69P AC 100 240 V, 50/60 Hz, 0.068 0.042 A DC 5.0 V, 550 r S o°cto40°c(32°Fto_04°F> Approx. 55 x 22 × 54 mr (2.2 × O.gx 2.2 in.) (excluding plug adapter) For Argentina: Approx. 55 × 59 x 63 mr (2.2 x 2.4 × 2.5 in.) For Brazil and Korea: Approx. 55 × 59 × 6_6..5mm (2.2 × 2.4 × 2.7 in.) Approx. 55 g (2.0 oz) (excluding plug adapter) For Argentina, Brazi[, and Korea: Approx. 80 g (2.9 oz) Specifications Nikon will not be held liable for any errors this manual may contain, The appearance of this product and its specifications are subject to change without notice. Supported Standards • DCF: Design Rule for Camera File System is a standard widely used in tile digital camera industry to ensure compatibility among different makes of camera. • DPOF: Digital Print Order Format is an industry wide standard that allows pictures to be printed from print orders stored on memory cards. • I=×ifversion 2.3: This camera supports Exchangeable image file format (Exif) version 2.3 for digital still cameras, a standard that allows information stored with photographs to be used for optimal color reproduction when images are output from Exiflcompliant printers. • PictBridge: A standard developed cooperatively by the digital camera and printer industries, allowing photographs to be output directly to a printer without connecting the camera to a computer. _:18

Scene mode 39 S0 Special effects mode 46 [] Smart portrait mode 47 I_1 Auto mode 50 [] Playback mode 32, 70 I_1 Favorite pictures mode 70, _4 Auto sort 70, _7 List by date 70, _9 V Setup menu 98 T (Telephoto) 2, 29 W (Wide-angle) 2, 29 C_Playback zoom 2, 33 [] Thumbnail playback 2, 33 Help 2, 39 • ('_ movie-record) button 3, 6, 7 I_1 (Shooting mode) button 3, 6, 7, 10 [] Playback button 3, 6, 7, 10, 32 _) Apply selection button 3, 7, 11 MENUMenu button 3, 6, 7, 12, 71,88, 93, 98 Delete button 3, 6, 7, 34, 95, _I,_56 Flash mode 54 Self timer 56 _ Macro mode 57 [] Exposure compensation 58 &j_J&lP=lk _,_3 A AC adapter _81 Adding favorite pictures _4 Advanced red-eye reduction 55 AF area mode 52, _42 AF assist 99, _69 Album _6 Aperture value 30 Apply selection button 4, 36, 83 Audio/video cable 72, _21, _81 Auto flash 55 Auto mode 50 Auto off88, 100, _70 Auto sort mode 70, _7 Autofocus 52, 57, 93, _45, _58 Autofocus mode 52, 93, _45, _58 B Backlighting i_ 44 Battery 16, 18, 25, _81 Battery chamber 3 Battery charger 19 Battery latch 3, 16 Battery level 22 Battery-chamber/merTlory card slot cover 3, 16,20 Beach -_ 41 Best shot selector _I,_39 Black and white copy [] 44 Blink proof49, _I,_36 Blink warning 100, _I,_75, _I,_76 Brightness _I,_64 BSS _39 Built-in microphone 2 Button sound _70 C Calendar Display 33 Charge by computer 100, _73 Charge lamp 3, 19, _I'_74 Charging AC Adapter 18 Close-up _ 42 Cloudy _I,_37 Color options _I,_16 Compression ratio 61 Connector cover 2 Continuous 51, _I,_39 Copying pictures 71, _I,_57 Crop _I,_ 19 9_ z o o_ x• _._19

Date format 24, _61 Daylight _!-_37 Daylight saving time 25, 98, _62 Delete 34, 95, _56 Digital zoom 29, 99, _69 D-Lighting 71, _!-_13 Dock Connector Cable 2 DPOF _:18 DPOF printing _!-_28 DSCN _!-_80 Dusk/dawn iii 42 E Easy auto mode 38 EH-69P ii, 18 EN-EL12 ii, 16, 18, _81 Enhanced resolution 93, _59 Exposure compensation 58 Extension _80 Eyelet for camera strap 2 F Face detection 65 Face priority _!-_42 Favorite pictures mode 70, _!-_4 File names _!-_80 Fill flash 55 Filter effects 71, _16 Fireworks show {:_._43 Firmware version 100, _79 Fisheye _16 Fixed range auto _!-_41 Flash 54 Flash lamp 54 Hash mode 54, 55 Hash off 55 _120 Focus 30, 52, _!-_42 Focus area 30 Focus indicator 8, 30 Focus lock 68 Folder names _!-_80 Food _143 Format 20, _!-_71 Format memory 100, _!-_71 Format memory card 20, 100, _!-_71 FSCN _!"_,80 Full-time AF 52, 93, _45, _58 __G Glamour retouch 71, _14 H HD 720p 93, _58 Help 39 _1 identifier _'_80 image mode .61,62 image review _'_64 image size 61 imprinting Date and Time _'_49, _'_66 interface 100, _73 internal memory 21 ISO sensitivity 51, _,41 J JPG _80 L Landscape [] 40 Language 100, _72 Lens 2, _:15 Lens cover 2 List by date mode 70, _'_9 M Macro mode 57 Memory card 20, 21 Memory card slot 3, 20 Miniature effect _16

Multi-shot 16 _I,_39 Museum _ 43 N Night landscape [] 42 Night portrait [] 41 Nikon Transfer 2 74 Number of exposures remaining 22, 62 O Optional accessories _81 Panorama assist _ 44, _2 Panorama Maker 5 44, _'63 Paper size _25, _26 Party/indoor _,_ 41 PC-PJ Transfer 82, _29 Pet portrait auto release 45 Pet portrait °# 45 Photo info _64 PictBridge 72, _22, _):18 Playback 32, 94, _55 Playback menu 71, _46 Playback mode 10, 32, 70 Playback Zoom 33 Portrait _ 40 Power 22, 23, 24 Power switch 2, 22, 23 Power-on lamp 2, 22, 23 Index Preset manual _38 Print _25, _26 Print date 25, 99, _47, _49, _66 Print order 71,88, _46 Printer 72, _22 Projector cover 2, 7, 80 Projector focus dial 2, 80 Projector input connector 2 Projector Settings 88, 98, _65 Projector stand 3, 81 Projector window 2, 80 Protect settings 71,88, _52 o Quick retouch 71, 0"612 R Rechargeable battery _81 Rechargeabie Lidon battery 16, 18, _81 Recording movies 90 Red-eye reduction 55 Remaining recording time 92 Remote control 4, 36, 80, _81 Removing favorite pictures _5 Reset all 100, _77 Rotate image 71,88, _54 RSCN _80 S Scene mode 39, 40 Self-timer 56 Selhtimer lamp 2, 48, 56 Sepia _ 16 Setup menu 98, _60 Shooting 26, 28, 30 Shooting menu 51, _37 Shutter sound 0"670 Shutter speed 30 Shutter-release button 2, 6, 7, 30 Single 51, _I'_39 Single AF 52, 93, _45, _58 2- z o o_ x• _721

Slide show 71,86, 88, 6"650 Slow sync 55 Small picture 71,6"_18 Smart portrait menu 49, 6"_36 Smart portrait mode 47 Smile timer 49, 6"_36 Snow [] 41 Soft 6"_16 Sound settings 99, 6"_70 Speaker 3 Special effects mode 46 Sports _ 40 SSCN 6"680 Strap 5 Subject tracking mode 6"_44 Sunset _ 41 ! Telephoto 29 Televisions 72, _21 Time zone 98, _61, _63 Time zone and date 24, 98, _61 Tripod socket 3, _)i-17 u__ USB lOG _73 USB cable 72, _23 USB/audio/video output connector 2, 72, 6"_21,6"_23 v_ VGA 93, 6"658 Vibration reduction 99, 6"_67 Video mode 100, 6"673 Video-in jack/audiodn jack 6"_21 Vivid color 6"_16 Voice memo 71,6"_55 Volume 94, 6"_55 w WAV 6"680 Welcome screen 98, 6"_60 White balance 51, 6"_37 Wide-angle 29 Wind noise reduction 8, 93, 6"_59 Z Zoom control 2, 6, 7, 29, 94 Zoom in 29 Zoom out 29 _722

in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. NIKON CORPORATION © 2011 Nikon Corporation YPll02(11) 6MM 14211-02