Nokia N71 Operation & User’s Manual

We, NOKIA CORPORATION declare under our sole responsibility that the product RM-67 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/ Copyright © 2006 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia, Nokia Connecting People, Pop-Port, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia tune is a sound mark of Nokia Corporation. This product includes software licensed from Symbian Software Ltd ©1998-200(6). Symbian and Symbian OS are trademarks of Symbian Ltd. Java™ and all Java-based marks are trademarks or registered trademarks of Sun This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See . Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. FCC / INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a t l h i l i it t i i i t) Th FCC I d t C d 9243184_N71-1_en_apac.book Page 1 Friday, May 26, 2006 2:31 PM

Your Nokia N71.........................................1 Settings.....................................................................................1 Transfer content.....................................................................1 Essential indicators................................................................2 Keypad lock (keyguard) ........................................................3 Volume and loudspeaker control.......................................3 Clock..........................................................................................3 Memory card tool ..................................................................4 File manager............................................................................5 Useful shortcuts .....................................................................6 Multimedia key.......................................................................7 Help............................................................................................8 Tutorial......................................................................................8 C Gallery.......................................................18 View images and video clips............................................19 Edit video clips.....................................................................19 Slide show.............................................................................21 Presentations........................................................................21 Albums ...................................................................................22 Image print ...........................................................................22 Media applications..................................24 RealPlayer..............................................................................24 Movie director......................................................................26 Messaging.................................................28 Write text..............................................................................29 Write and send messages.................................................30 Inbox — receive messages ................................................32 Contents 9243184_N71-1_en_apac.book Page 2 Friday, May 26, 2006 2:31 PM

Answer or reject a call.......................................................47 Log...........................................................................................49 Contacts (phonebook)............................ 51 Save names and numbers .................................................51 Copy contacts.......................................................................52 Add ringing tones for contacts........................................53 Create contact groups........................................................53 Services.................................................... 54 Services access point..........................................................54 Bookmarks view...................................................................54 Connection security............................................................55 Browse....................................................................................55 Download and purchase items ........................................56 End a connection.................................................................56 Services settings..................................................................56 My own.................................................... 58 Calendar....................................................66 Create calendar entries .....................................................66 Calendar views.....................................................................66 Manage your calendar entries.........................................67 Calendar settings ................................................................67 Office........................................................68 Calculator..............................................................................68 Converter...............................................................................68 Notes.......................................................................................68 Recorder.................................................................................69 Personalize your device...........................70 Profiles — set tones ............................................................70 Change the look of your device ......................................71 Active standby mode..........................................................72 Connectivity .............................................73 Bluetooth connectivity......................................................73 I f d i 9243184_N71-1_en_apac.book Page 3 Friday, May 26, 2006 2:31 PM

Troubleshooting .......................................94 Q&A.........................................................................................94 Battery information ................................97 Charging and discharging.................................................97 Nokia battery authentication guidelines .....................97 Nokia original enhancements.............. 100 Battery .................................................................................101 Nokia Wireless Headset HS-26W ................................101 Nokia Wireless Headset HS-36W.................................102 Nokia Universal Holder CR-39 ......................................103 Care and maintenance ......................... 104 9243184_N71-1_en_apac.book Page 4 Friday, May 26, 2006 2:31 PM

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the device off near medical SWITCH OFF WHEN REFUELLING Do not use the device at a refuelling point. Do not use near fuel or chemicals. SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the device where blasting is in progress. USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. WATER RESISTANCE Y d i i 9243184_N71-1_en_apac.book Page v Friday, May 26, 2006 2:31 PM

connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. The keypad is active only in the fold open mode. Press as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press . Give your location. Do not end the call until given permission to do so. About your device The wireless device described in this guide is approved for use on the EGSM 900,1800, and 1900 and UMTS 2100 networks. Contact your service provider for more information about networks. Wh i h f i hi d i b ll l d Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger. Network services To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. Network features are designated in this guide by (network service). 9243184_N71-1_en_apac.book Page vi Friday, May 26, 2006 2:31 PM

run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail and content downloading using the browser or over MMS, require network support for these technologies. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. Enhancements, batteries, and chargers Always switch the device off and disconnect the charger before removing the battery. Check the model number of any charger before use with this device. This device is intended for use when supplied with power from a DC-4, AC-3 and AC-4 charger, and from an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or LCH-12 charger when used with the charger adapter The battery intended for use with this device is BL-5C. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. 9243184_N71-1_en_apac.book Page vii Friday, May 26, 2006 2:31 PM

Your Nokia N71 Model number: Nokia N71 Hereinafter referred to as Nokia N71. Settings Your Nokia N71 normally has MMS, GPRS, streaming, and mobile Internet settings automatically configured, based upon your service provider or network operator information. You may have settings from your service providers already installed in your device, or you may receive the settings from the service providers as a special text message. Transfer content Y t f t t h t t f You can insert your SIM card in the other device. When Nokia N71 is switched on without a SIM card, the offline profile is automatically activated. Transfer content 1 To use the application for the first time, press , and select Tools > Transfer. If you have used the application before and want to start a new transfer, select Transfer data. In the information view, select Continue. 2 Select whether you want to use Bluetooth connectivity or infrared to transfer the data. Both devices must support the selected connection type. 3 If you select Bluetooth connectivity to search for devices, select Continue. The visibility of the other device must be on. Select your other device from the list. You are asked to enter a code on your Nokia N71. Enter a code (1–16 digits), and select OK. Enter the d h h d i d l OK Th 9243184_N71-1_en_apac.book Page 1 Friday, May 26, 2006 2:31 PM

4 From your Nokia N71, select the content you want to copy from the other device. Content is copied from the memory and compatible memory card (if inserted) of the other device to the corresponding location in your Nokia N71 and compatible memory card (if inserted). Copying time depends on the amount of data to be transferred. You can cancel copying and continue later. If the other device supports synchronization, you can keep the data up-to-date in both devices. To start a synchronization with a compatible Nokia device, select Phones, scroll to the device, and select Options > Synchronise. Follow the instructions on the display. Essential indicators The device is being used in a GSM network. The device is being used in a UMTS network (network service). Shown if Ringing type is set to Silent and Message alert tone, IM alert tone, and E-mail alert tone are set to Off. The device keypad is locked. A clock alarm is active. The second phone line is being used (network service). All calls to the device are diverted to another number. If you have two phone lines (network service), the indicator for the first line is and for the second . A headset is connected to the device. The connection to a headset with Bluetooth connectivity has been lost. A loopset is connected to the device. A Text phone is connected to the device. A data call is active. A GPRS or EDGE packet data connection is available 9243184_N71-1_en_apac.book Page 2 Friday, May 26, 2006 2:31 PM

Bluetooth connectivity is on. Data is being transmitted using Bluetooth connectivity. A USB connection is active. An infrared connection is active. If the indicator is blinking, the device is trying to connect to the other device or the connection has been lost. Keypad lock (keyguard) Use the keypad lock to prevent the keys from being accidentally pressed. To lock, in standby mode, press , then . When the keys are locked, is shown on the display. To unlock in fold open mode, press , then . To lock the keypad, in fold open mode press the power key, and select Lock keypad. To lock the keypad in fold closed mode press the power key Volume and loudspeaker control To increase or decrease the volume level when you have an active call or are listening to a sound, press or . The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To use the loudspeaker during a call, select Options > Activate loudsp.. To turn off the loudspeaker, select Options > Activate handset. Clock 9243184_N71-1_en_apac.book Page 3 Friday, May 26, 2006 2:31 PM

To turn off the alarm, select Stop, or to stop the alarm for 5 minutes, select Snooze. If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. To cancel an alarm, select Clock > Options > Remove alarm. Clock settings To change the clock settings, select Clock > Options > Settings. To change the time or date, select Time or Date. To change the clock shown in the standby mode, select Clock type > Analogue or Digital. World clock To open the world clock view, open Clock, and press . In the world clock view, you can view the time in different cities. To add cities to the list, select Options > Add city. You can add a maximum of 15 cities to the list. To set your current city, scroll to a city, and select Options > My current city. The city is displayed in the clock main view, and the time in your device is changed according to the city selected. Check that the time is correct and matches your time zone. Memory card tool Use only miniSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function tl b f ll tibl ith thi d i 9243184_N71-1_en_apac.book Page 4 Friday, May 26, 2006 2:31 PM

To back up information from the device memory to a memory card, select Options > Backup phone mem. To restore information from the memory card to the device memory, select Options > Restore from card. Format a memory card When a memory card is reformatted, all data on the card is permanently lost. Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it. To format a memory card, select Options > Format mem. card. Select Yes to confirm. Eject the memory card 1 Before you eject the card, press the power key, and select Remove mem. card. All 3 Press and release the memory card to eject it from the slot. 4 Remove the memory card, close the door, and select OK. Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. File manager Many features of the device, such as contacts, messages, images, videos, ringing tones, calendar notes, documents, and downloaded applications, use memory to store data. The free memory available depends on how much data is already saved in the device memory. Y tibl d t t 9243184_N71-1_en_apac.book Page 5 Friday, May 26, 2006 2:31 PM

To move or copy files to a folder, press and at the same time to mark a file, and select Options > Move to folder or Copy to folder. To find a file, select Options > Find and the memory from which to search, and enter a search text that matches the file name. View memory consumption To view what types of data you have in the device and how much memory the different data types consume, select Options > Memory details. The amount of available free memory is shown in Free memory. Memory low — free memory The device notifies you if the device or the memory card memory is low. To free device memory, transfer data to a compatible memory card, if you have one. Mark files to be moved, and l t O ti M t f ld M d d To remove data to free memory, use File mgr., or go to the respective application. For example, you can remove the following: • Messages from Inbox, Drafts, and Sent folders in Messag. • Retrieved e-mail messages from the remote mail server • Saved Web pages • Saved images, videos, or sound files • Contact information • Calendar notes • Downloaded applications. See also "Application manager", on page 90. • Installation files (.sis) of applications you have installed to a compatible miniSD card; first back up the installation files to a compatible PC using Nokia PC Suite. • Any other data that you no longer need Useful shortcuts Use shortcuts to quickly get the most from your device. 9243184_N71-1_en_apac.book Page 6 Friday, May 26, 2006 2:31 PM

Leaving applications running in the background increases the demand on battery power and reduces the battery life. • To start the camera, press . • To call your voice mailbox (network service), press and hold . • To open multimedia applications, press or press and hold . See "Multimedia key", on page 7. • To change the profile, press , and select a profile. • If you have two phone lines (network service), press to switch between the two lines. • To open the last dialed numbers list, press . • To use voice commands, press and hold . • To start a connection to Services, press and hold . See "Services", on page 54. For further shortcuts available in the standby mode, see "Active standby mode", on page 72. Edit text and lists • To mark an item in a list, scroll to it, and press and at the same time • To select letters and words, press and hold . At the same time, press or to highlight text. • To copy the text to clipboard, while still holding , select Copy. • To insert the text into a document, press and hold , and select Paste. Multimedia key To open the shortcut assigned to the multimedia key, press and hold . To open a list of multimedia applications, press . To open the desired application, press , , or . To exit the list without selecting an application, press . To change the shortcuts, press , and press . To change the applications that are shown when you press , select Top, Left, Middle, and Right and the application. Some shortcuts may be fixed, and you are not able to change them 9243184_N71-1_en_apac.book Page 7 Friday, May 26, 2006 2:31 PM

Help Your device has context-sensitive help. When an application is open, select Options > Help to access help for the current view. When you are reading the instructions, to switch between help and the application that is open in the background, press and hold . To open help from the main menu, select Tools > Help. Select the desired application to view its help topics. Tutorial The tutorial gives you information about some of the features of your device. To access the tutorial in the menu, press , and select My own > Tutorial and the section you want to view. 9243184_N71-1_en_apac.book Page 8 Friday, May 26, 2006 2:31 PM

on the outside of the device, and a lower resolution camera above the inner main display, which is visible when the cover is opened. Both cameras can be used to take still pictures and video. To activate the camera, open the cover, press , and select Camera. In the viewfinder, you can see the view to be captured. The images and video clips are automatically saved in the Gallery. The cameras produce .jpg images. Video clips are recorded in the 3gpp file format with the .3gp file extension (normal and sharing video quality modes) or in the .mp4 file format (high video quality mode). See "Video settings", on page 16. You can send images in a multimedia message as an e-mail attachment, or by using Bluetooth connectivity. Camera display Camera indicators show the following: • The device memory ( ) and memory card ( ) indicators (1) show where images are saved. • The images indicator (2) estimates how many images, depending on the selected image quality, can fit in the remaining memory of your device or the memory card. • The self-timer indicator (3) shows that the self-timer is activated. See "You in the picture — self-timer", on page 12. • The sequence mode 9243184_N71-1_en_apac.book Page 9 Friday, May 26, 2006 2:31 PM

selecting Options > Image mode. To select the secondary camera (for example, to include yourself in the picture), select Options > Use second. cam.. To use the main camera again, select Options > Use main camera. To zoom in and out, press or . The zoom indicator, which is displayed on the side of the viewfinder, shows the zoom level. The quality (resolution) of a zoomed picture is lower than that of a nonzoomed picture. To take a picture, press . Do not move the device before the image is saved. The image is saved automatically in the Images & videofolder of Gallery. See "Gallery", on page 18. Saving the captured image may take longer if you change the zoom, lighting, or color settings. To select the shooting mode; flash colour and lighting After the image is taken, do any of the following: • If you do not want to keep the image, select Options > Delete, or press . • To send the image Via multimedia, Via e-mail, or Via Bluetooth, or Via infrared, select Options > Send. For more information, see "Messaging", on page 28 and "Bluetooth connectivity", on page 73. This option is not available during an active call. • To send an image to the other party during an active call, select Options > Send to caller. • To edit the picture, select Options > Edit. See "Edit images", on page 13. • To print the picture, select Options > Print. See "Image print", on page 22. The camera goes into battery saving mode if you do not make any key presses for a while. To continue taking pictures, press . Camera setup 9243184_N71-1_en_apac.book Page 10 Friday, May 26, 2006 2:31 PM

adjusted, and press . The settings available depend on which camera is in use. To reactivate the viewfinder, press Cancel or . The settings return to the default settings when you close the Camera. Shooting mode The settings of each shooting mode have been set to match a certain style or environment. The following shooting modes are available: Automatic, User defined, Portrait, Landscape, Sports and Night. Scroll to the appropriate shooting mode for taking a picture, and press . When taking pictures the default shooting mode is Flash The camera has an LED flashlight for low light conditions. Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture. The following flash modes are available: Automatic, On, and Off Scroll to the desired flash setting and press . If the flash is set to Off or Automatic during bright conditions, the flash still emits a low light when an image is captured. This allows the subject of the picture to see when the picture is taken. There is no flash effect on the resultant picture. White balance Select the appropriate setting that matches the current lighting conditions. This allows the camera to reproduce colors more accurately. S ll h d i d i d 9243184_N71-1_en_apac.book Page 11 Friday, May 26, 2006 2:31 PM

Select Options > Advanced sequence to set the camera to take several pictures in a sequence automatically. You can set the rate between two frames per second (fast) and one frame every 15 minutes (slow). The number of pictures is limited by the amount of memory available. The pictures are automatically saved in Gallery. You can also use the sequence mode with the Self timer. See "You in the picture — self-timer", on page 12. After taking the pictures, they are shown in a grid on the main display. To view a picture, press to open it. To return to the sequence mode viewfinder, select self-timer, select Activate. The self-timer indicator ( ) blinks and the device beeps when the timer is running. The camera takes the picture after the selected delay has elapsed. You can also use the Self timerin the sequence mode. See "Take time-lapse pictures", on page 12. Camera settings To change the main camera settings, select Options > Settings, and from the following: Image quality — Print (1600x1200 resolution), E-mail (1024x768 resolution) or MMS (640x480 resolution). The better the image quality, the more memory the image uses. Add to album — Select whether you want to save the image to a certain album in Gallery. If you select Yes, a list of available albums opens. Extended zoom — Select On if you want to achieve maximum zoom but are prepared to accept a reduction in image resolution, which may be lower than you have selected with the Image quality setting If you want to 9243184_N71-1_en_apac.book Page 12 Friday, May 26, 2006 2:31 PM

take a picture. Memory in use — Select where to store your images. Edit images To edit the picture you have just taken, select Options > Edit. To edit other pictures, select them from Gallery. Select Options > Apply effect to crop and rotate the image; adjust the color, compression, and resolution; also, to add effects, text, clip art, or a frame to the picture. To manually crop an image, select Options > Apply effect > Crop > Manual. A rectangle indicating the crop area is displayed. Scroll to define the top left starting point for the crop, and select Set. Scroll to the bottom right of the area to be cropped, and select Crop. To reduce redness of the eyes in an image, select Options > Apply effect > Red eye reduction. Move the cross onto the eye, and press . A loop appears on the display. To add text to an image, select Options > Apply effect > Text. Enter the text, and select OK. To edit the text, select Options > Move text, Resize text, Rotate text, or Select colour. Shortcuts in the image editor: • To view an image in full screen, press . To return to the normal view, press again. • To rotate an image clockwise or counterclockwise, press. and . • To zoom in or zoom out, press and . Tips on taking good photographs Picture quality Use the appropriate picture quality. The camera has three picture quality settings. Use Print for large prints up to 25x20 centimeters (10x8 inches), E-mailfor e-mail and prints up to 15x10 centimeters (6x4 inches), or MMS for use in a multimedia message The better the image quality 9243184_N71-1_en_apac.book Page 13 Friday, May 26, 2006 2:31 PM

pictures with people, avoid having your subject in front of a cluttered, complex background that may distract attention from the subject. Move the camera or the subject when these conditions cannot be met. Move the camera closer to the object to take clearer portraits. Depth When taking pictures of landscapes, add depth to your pictures by placing objects in the foreground. However, if the foreground object is too close to the camera, it may be blurred. Lighting conditions Changing the source, amount, and direction of light can change photographs dramatically. Here are some typical lighting conditions: • Sidelit subject — Strong side light gives a dramatic effect but may be too harsh, resulting in too much contrast. • Light source in front of the subject — Harsh sunlight may cause the subjects to squint their eyes. The contrast may also be too high. • Optimal lighting — Found in situations where there is plenty of diffused, soft light available; for example, on a bright, partially cloudy day or on a sunny day in the shadow of trees. Video recorder display Video recorder indicators show the following:. • The device memory ( ) and memory card ( ) indicators (1) show where the video is saved. • The current video length 9243184_N71-1_en_apac.book Page 14 Friday, May 26, 2006 2:31 PM

Options > Video mode. To select the secondary camera (for example, to include yourself in the video), select Options > Use second. cam.. To use the main camera again, select Options > Use main camera. The zoom indicator, which appears on the side pane, shows the zoom level. Press or to zoom in or zoom out. 1 Press to start recording. The record icon is shown. The LED flash is lit, and a tone sounds, indicating to the subject that video is being recorded. There is no flash effect on the resultant video. 2 To pause recording at any time, select Pause. The pause icon blinks on the display. Video recording automatically stops if recording is set to pause and there are no key presses within a minute. 3 Select Continue to resume recording. 4 Select Stop to stop recording The video clip is After a video clip is recorded, do the following: • To immediately play the video clip you just recorded, select Options > Play. • If you do not want to keep the video, select Options > Delete. • To return to the viewfinder to record a new video, press . • To send the video Via multimedia, Via e-mail, or Via Bluetooth, or Via infrared, select Options > Send. For more information, see "Messaging", on page 28 and "Bluetooth connectivity", on page 73. This option is not available during an active call. • To send a video clip to the other party during an active call, select Options > Send to caller. • To edit the video, select Options > Edit. See also "Edit video clips", on page 19. Video recorder setup If the viewfinder is active, press or , or select Options > Open setup 9243184_N71-1_en_apac.book Page 15 Friday, May 26, 2006 2:31 PM

match a certain style or environment. The following shooting modes are available: Automatic, or Night. Scroll to the appropriate shooting mode for recording a video, and press . White balance Select the appropriate setting that matches the current lighting conditions. This allows the camera to reproduce colors more accurately. Scroll to the desired setting and press . Color tone Video settings There are two kinds of settings for the video recorder: video recorder setup and video settings. To adjust video recorder setup, see "Video recorder setup", on page 15. The video recordersettings return to the default settings after you close the camera, but the video settings remain the same until you change them again. To change the video settings, select Options > Settings and from the following: Audio recording — Select On if you want to record both image and sound. Video quality — Set the quality of the video clip to High, Normal, or Sharing. If you select High or Normal, the length of the video recording is restricted by the available space on your memory card, and up to one hour per clip. If you want to view the video on a compatible TV or PC, select High video quality, which has CIF resolution (352x288) and file format .mp4. You cannot send video clips saved in the .mp4 format in a multimedia message. If you want to view the clip in compatible mobile devices, select Normal, 9243184_N71-1_en_apac.book Page 16 Friday, May 26, 2006 2:31 PM

a multimedia message to a compatible device. Some networks, however, may only support sending of multimedia messages with a maximum size of 100 KB. Contact your service provider for more information. Add to album — Select Yes to save the recorded video clip to a particular album in Gallery. Show captured video — Select Off to record a video clip immediately after another. Your videos are not played after being recorded, and the video recorder is ready for use again. Default video name — Select Date or Text as the default name for videos you record. Memory in use — Choose the default memory store: device memory or memory card. 9243184_N71-1_en_apac.book Page 17 Friday, May 26, 2006 2:31 PM

playlists, and streaming links, press , and select Gallery. To open the gallery from the Camera application, select Options > Go to Gallery. From Camera, only the Images & video folder is available. Tip! To switch from Gallery to Camera, select Options > Go to Camera from the Images & video folder. Select Images & video, Tracks, Sound clips, Streaming links, Presentations, or All files, and press . You can browse and open folders, mark, copy, and move items to folders and Tip! You can transfer images from your device to a compatible PC with Nokia Phone Browser available in Nokia PC Suite. See the CD-ROM supplied with your device. Press to open a file. Videos and Real audio clips open in RealPlyr., and music opens in the music player. See "View images and video clips", on page 19. See "Music player", on page 58. To copy or move files to a compatible memory card or to device memory select a file and Options > Move and copy > Copy to memory card, Move to memory card, Copy to phone mem., or Move to phone mem.. Files stored on the memory card are indicated with . Files stored in the device memory are indicated with . To reduce the size of image files, select Options > Shrink. To reduce the size of files that you have already copied to 9243184_N71-1_en_apac.book Page 18 Friday, May 26, 2006 2:31 PM

Pictures taken and video clips recorded with the camera are stored in the Images & video folder in Gallery. Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, or using Bluetooth connectivity. To be able to view a received image or video clip in Gallery or in RealPlyr., you must save it in the device memory or on a compatible memory card. Open the Images & video folder in Gallery. The images and video clip files are in a loop and ordered by date. To browse individual files, press or . To browse files in groups, press or . To edit a photo or a video clip, select Options > Edit. An image editor or a video editor opens. To add an image or a video clip to an album in Gallery, select Options > Albums. > Add to album. See "Albums", on page 22. To create custom video clips, select a video clip or mark To zoom an opened image, select Options > Zoom in or Zoom out. The zooming ratio is at the top of the display. The zooming ratio is not stored permanently. Edit video clips You can edit video clips in Gallery. See "Gallery", on page 18. To edit video clips and create custom video clips, scroll to a video clip, and select Options >Edit. You can create custom video clips by combining and trimming video clips, and adding images, sound clips, transitions, and effects. Transitions are visual effects that you can add to the beginning and end of the video or between the video clips. In the video editor you can see two timelines: video clip timeline and sound clip timeline. If you add images, text, or transitions to a video clip, they are shown on the video clip timeline. To move on the timelines, press or . To switch between the timelines, press or . To create custom video clips, mark one or more video clips, 9243184_N71-1_en_apac.book Page 19 Friday, May 26, 2006 2:31 PM

Cut — Trims the video clip in the cut video clip view. Add colour effect — Inserts a color effect in the video clip. Use slow motion — Slows the speed of the video clip. Mute sound or Unmute sound — Mutes or unmutes the original video clip sound. Move — Moves the video clip to the selected location on the timeline. Remove — Removes the video clip from the video. Duplicate — Makes a copy of the selected video clip. Edit text (shown only if you have added text) — To move, remove, or duplicate text; change the color and style of the text; define how long it stays on the screen; and add effects to the text. Edit image (shown only if you have added an image) — To move, remove, or duplicate an image; define how long it Remove — Removes the sound clip from the video. Duplicate — Makes a copy of the selected sound clip. Set duration — Changes the length of the sound clip. Edit transition — There are three types of transitions: at the start of a video, at the end of a video, and transitions between video clips. A start transition can be selected when the first transition of the video is active. Insert: Video clip — Inserts the selected video clip. A thumbnail of the video clip is shown in the main view. A thumbnail consists of the first non-black frame of the video clip. The name and length of the selected video clip is also shown. 9243184_N71-1_en_apac.book Page 20 Friday, May 26, 2006 2:31 PM

selected location. Movie — To preview the movie in full screen or as a thumbnail, or save the movie. Tip! To take a snapshot of a video clip, select Options > Take snapshot in the cut video view. To save your video, select Options > Movie > Save. To define the Memory in use, select Options > Settings. The default is the device memory. Tip! In the Settings view, you can define Default video name, Default sc. shot name, Resolution, and Memory in use. Select Options > Send > Via multimedia, Via e-mail, Via Bluetooth, or Via infrared if you want to send the video. Contact your service provider for details of the maximum multimedia message size that you can send. If your video is too large to be sent in a multimedia message, is displayed. Slide show To view images and video clips in the full screen mode, select Options > Slide show > Start. Press (faster) or (slower) to adjust the display speed. Press (next) or (previous) to browse the thumbnails. To add sound to the slide show in the Images & Video folder, select Options > Slide show > Settings and from the following: Music — Select On, or Off Track — Select a music file from the list Volume — Press to decrease the volume or to increase the volume Presentations With presentations, you can view SVG (scaleable vector graphic) files. SVG images maintain their appearance 9243184_N71-1_en_apac.book Page 21 Friday, May 26, 2006 2:31 PM

and video clips. To view the albums list, in the Images & video folder, select Options > Albums > View albums. The albums are ordered alphabetically. To view the content of an album, press . To create a new album, select Options > New album. Enter a name for the album, and select OK. To add a picture or a video clip to an album in Gallery, scroll to a picture or video clip, and select Options > Albums. > Add to album. A list of albums opens. Select the album to which you want to add the picture or video clip, and press . To remove a file from an album, press . The file is not deleted from the Images & video folder in Gallery. Image print T i i i ibl d bl You can only print images that are in jpg format. The pictures taken with the camera are automatically saved in .jpg format. Note: Connect the data cable to a PictBridge compatible printer, and select Pictbridge from the popup display on your device before you print. Printer selection When you print for the first time, a list of available printers is displayed after you select the image. Select a printer. The printer is set as the default printer. If you have connected a PictBridge compatible printer using the CA-53 cable, the printer is automatically displayed. If the default printer is not available, a list of available printing devices is displayed. To change the default printer, select Options > Settings > Default printer. 9243184_N71-1_en_apac.book Page 22 Friday, May 26, 2006 2:31 PM

an image in the gallery. The selected images are displayed using predefined layouts. To change the layout, scroll left and right through the available layouts for the selected printer. If the images do not fit on a single page, press or to display the additional pages. Print settings The available options vary, depending on the capabilities of the printing device you selected. To set a default printer, select Options > Default printer. To select the paper size, select Paper size, the size of paper from the list, and OK. Select Cancel to return to the previous view. 9243184_N71-1_en_apac.book Page 23 Friday, May 26, 2006 2:31 PM

you can play video clips, sound clips, and playlists, or stream media files over the air. You can activate a streaming link when you browse Web pages, or store it in the device memory or a compatible memory card (if inserted). RealPlyr. supports files with extensions such as .3gp, .mp4 or .rm. However, RealPlyr. does not necessarily support all file formats or all the variations of file formats. For example, RealPlyr. attempts to open all .mp4 files, but some .mp4 files may include content that is not compliant with 3GPP standards and, therefore, is not supported by your device. Saved clip — to play a file saved in Gallery. See "Gallery", on page 18. 2 Scroll to a file, and press to play the file. Tip! To view a video clip in full screen mode, press . Press again to change back to normal screen mode. Shortcuts during play: • To fast forward, press and hold . • To rewind through the media file, press and hold . • To mute the sound, press and hold until is displayed. To turn on the sound, press and hold until you see . Stream content over the air Many service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point 9243184_N71-1_en_apac.book Page 24 Friday, May 26, 2006 2:31 PM

saved in Gallery, on a Web page, or received in a text message or multimedia message. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in your device. Receive RealPlayer settings You may receive RealPlyr. settings in a special text message from the network operator or service provider. See "Data and settings", on page 33. For more information, contact your network operator or service provider. Change the RealPlayer settings Select Options > Settings and from the following: Video — to adjust the contrast of the video, and to have RealPlyr. automatically repeat video clips after they finish playing Connection — to select whether to use a proxy server, Proxy serv. address — Enter the IP address of the proxy server Proxy port number — Enter the port number of the proxy server Glossary: Proxy servers are intermediate servers between media servers and their users. Some service providers use them to provide additional security or speed up access to browser pages that contain sound or video clips. Netw. sett.: Default access point — Scroll to the access point you want to use to connect to the Internet, and press Online time — Set the time for RealPlyr. to disconnect from the network when you pause a media clip playing through a network link. Select User defined, and press . Enter the time, and select OK. Lowest UDP port — Enter the lowest port number of the server’s port range. The minimum value is 1024. 9243184_N71-1_en_apac.book Page 25 Friday, May 26, 2006 2:31 PM

, and select Imaging > Movie. Muvees are short, edited video clips that can contain video, images, music, and text. Quick muvee is created automatically by Movie director after you select the style for the muvee. Movie director uses the default music and text associated with the chosen style. In a Custom muvee you can select your own video and music clips, images and style, and add an opening and closing message. You can send muvees with MMS. Open Movie, and press or to move between the and views. To return to the main view from the view, select Done. The view contains a list of video clips that you can Play, Send, Rename, and Delete. Create a quick muvee Create a custom muvee 1 In the Movie Director main view, select Custom muvee. 2 Select the clips you want to include in your muvee in Video, Image, Style, or Music. After you select video clips and images, to define the order in which the files are played in the muvee, select Options > Advanced options. To select the file you want to move, press . Then scroll to the file below which you want to place the marked file, and press . To cut the video clips, select Options > Select contents. See "Select content", on page 27. In Message you can add an opening and closing text to a muvee. 3 Select Options > Create muvee and from the following: Multimedia message — to optimize the length of the muvee for MMS sending Auto-select — to include all the selected pictures and video clips in the muvee 9243184_N71-1_en_apac.book Page 26 Friday, May 26, 2006 2:31 PM

Preview view, select Options > Play. To create a new custom muvee by using the same style settings, select Options > Recreate. Select content To edit the selected video clips, select Options > Advanced options > Options > Select contents. You can select which parts of the video clip you want to include or exclude in the muvee. In the slider, green is for included, red is for excluded, and grey is for neutral parts. To include a part of the video clip in the muvee, scroll to the part, and select Options > Include. To exclude a part, select Options > Exclude. To exclude a shot, select Options > Exclude shot. To let Movie director randomly include or exclude a part or parts of the video clip, scroll to the part, and select Options > Mark as neutral or Mark all as neutral. Settings 9243184_N71-1_en_apac.book Page 27 Friday, May 26, 2006 2:31 PM

send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive messages and data using Bluetooth connectivity or infrared, receive Services messages, cell broadcast messages, and send service commands. To create a new message, select New message. Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. Messag. contains the following folders: Inbox — Received messages, except e-mail and cell broadcast messages, are stored here. E-mail messages are stored in the Mailbox Drafts — Draft messages that have not been sent are stored here. Sent — The last 20 messages that have been sent, excluding messages sent using Bluetooth connectivity or infrared, are stored here. To change the number of messages to be saved, see "Other settings", on page 40. Outbox — Messages waiting to be sent are temporarily stored here. Example: Messages are placed in the outbox, for example, when your device is outside network coverage. You can also schedule e-mail messages to be sent the next time you connect to your remote mailbox. Reports (network service) — You can request the network to send you a delivery report of the text messages and multimedia messages you have sent Receiving a 9243184_N71-1_en_apac.book Page 28 Friday, May 26, 2006 2:31 PM

commands), such as activation commands for network services, to your service provider, select Options > Service command in the Messag. main view. Cell broadcast (network service) allows you to receive messages on various topics, such as weather or traffic conditions, from your service provider. For available topics and relevant topic numbers, contact your service provider. In the Messaging main view, select Options > Cell broadcast. In the main view, you can see the status of a topic, a topic number, name, and whether it has been flagged ( ) for follow-up. Cell broadcast messages cannot be received in UMTS networks. A packet data connection may prevent cell broadcast reception. Write text ABC, abc, and Abc indicate the selected character mode. 123 indicates the number mode • Press a number key ( — ) repeatedly until the desired character appears. There are more characters available for a number key than are printed on the key. • If the next letter is located on the same key as the present one, wait until the cursor appears (or press to end the time-out period), and enter the letter. • To insert a space, press . To move the cursor to the next line, press three times. Predictive text input You can enter any letter with a single keypress. Predictive text input is based on a built-in dictionary to which you can add new words. is displayed when you write text using predictive text input. 1 To activate predictive text input, press , and select Predictive text on. This activates predictive text input for all editors in the device. 2 To write the desired word, press the keys — . Press each key only once 9243184_N71-1_en_apac.book Page 29 Friday, May 26, 2006 2:31 PM

3 When you finish writing the word correctly, press to confirm it, or press to add a space. If the word is not correct, press repeatedly to view the matching words the dictionary has found one by one, or press , and select Predictive text > Matches. If the ? character is shown after the word, the word is not in the dictionary. To add a word to the dictionary, select Spell, enter the word using traditional text input, and select OK. The word is added to the dictionary. When the dictionary is full, a new word replaces the oldest added word. 4 Start writing the next word. Write compound words Write the first half of a compound word; to confirm it, press . Write the last part of the compound word. To complete the compound word, press to add a space. Turn predictive text input off Tips on text input To insert a number in the letter mode, press and hold the desired number key. To switch between the letter and number mode, press and hold . To switch between the different character modes, press . To delete a character, press . To delete more than one character, press and hold . To access the most common punctuation marks, press . To open a list of special characters, press . Tip! To insert several special characters at the same time, press when you select each character. Write and send messages The appearance of a multimedia message may vary, depending on the receiving device. 9243184_N71-1_en_apac.book Page 30 Friday, May 26, 2006 2:31 PM

Text message — to send a text message Multimedia message — to send a multimedia message (MMS) E-mail — to send an e-mail If you have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. 2 In the To field, press to select recipients or groups from contacts, or enter the recipient’s phone number or e-mail address. To add a semicolon (;) that separates the recipients, press . You can also copy and paste the number or address from the clipboard. 3 In the Subject field enter 5 To add a media object to a multimedia message, select Options > Insert object > Image, Sound clip, or Video clip. When sound is added, is shown. You cannot send video clips that are saved in the .mp4 format in a multimedia message. To change the format in which recorded videos are saved, see "Video settings", on page 16. 6 To take a new picture or record sound or video for a multimedia message, select Options > Insert new > Image, Sound clip, or Video clip. To insert a new slide to the message, select Slide. To see what the multimedia message looks like, select Options > Preview. 7 To add an attachment to an e-mail, select Options > Insert > Image, Sound clip, Video clip, or Note. E-mail attachments are indicated by . Tip! To send other file types as attachments, open the appropriate application, and select Options > Send > Via e-mail, if available. 8 To send the message, select Options > Send, or press 9243184_N71-1_en_apac.book Page 31 Friday, May 26, 2006 2:31 PM

message. In the navigation bar, you can see the message length indicator counting backwards. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages. E-mail messages are automatically placed in Outbox before sending. If sending does not succeed, the e-mail is left in the Outbox with the Failed status. Tip! You can combine images, video, sound, and text to a presentation and send it in a multimedia message. Start to create a multimedia message, and select Options > Create presentation. The option is shown only if MMS creation mode is set to Guided or Free. See "Multimedia messages", on page 37. Receive MMS and e-mail settings You may receive the settings in a message from your network operator or service provider. See "Data and settings", on page 33. 2 Press , and select Messaging > Options > Settings > Multimedia message > Access point in use and the access point you created as the preferred connection. See also "Multimedia messages", on page 37. Before you can send, receive, retrieve, reply to, and forward e-mail, you must do the following: • Configure an Internet access point (IAP) correctly. See "Connection", on page 82. • Define your e-mail settings correctly. If you select Mailbox in the Messag. main view and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also "E-mail", on page 38. You must have a separate e-mail account. Follow the instructions given by your remote mailbox and Internet service provider (ISP). Inbox — receive messages 9243184_N71-1_en_apac.book Page 32 Friday, May 26, 2006 2:31 PM

and 1 new message are shown in the standby mode. To open the message, select Show. To open a message in Inbox, scroll to it, and press . To reply to a received message, select Options > Reply To print a text or a multimedia message on a compatible basic print profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print. Multimedia messages Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. You may receive a notification that a multimedia message is waiting in the multimedia message center. To start a packet data connection to retrieve the message to your device select Options > Retrieve If the message includes a multimedia presentation, is displayed. To play the presentation, select the indicator. Data and settings Your device can receive many kinds of messages that contain data ( ): Configuration message — You may receive settings from your network operator, service provider, or company information management department in a configuration message. To save the settings, select Options > Save all. Business card — To save the information to Contacts, select Options > Save business card. Certificates or sound files attached to the business card are not saved. Ringing tone — To save the ringing tone, select Options > Save. Operat. logo — To have the logo shown in the standby mode instead of the network operator’s own identification, select Options > Save. 9243184_N71-1_en_apac.book Page 33 Friday, May 26, 2006 2:31 PM

you have in your remote mailbox. An extended notification may list more detailed information. Service messages Service messages ( ) are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider. Mailbox If you select Mailbox and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also "E-mail", on page 38. When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. To connect to your mailbox and retrieve new e-mail headings or messages, select Yes. When you view messages online, you are continuously connected to a remote mailbox using a data connection. See also "Connection", on page 82. To view previously retrieved e-mail messages offline, select No. When you view e-mail messages offline, your device is not connected to the remote mailbox. Retrieve e-mail messages If you are offline, select Options > Connect to start a connection to the remote mailbox. Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC. 1 When you have an open connection to a remote mailbox, select Options > Retrieve e-mail and one of the following: 9243184_N71-1_en_apac.book Page 34 Friday, May 26, 2006 2:31 PM

continue viewing them online, or select Options > Disconnect to close the connection and view the e-mail messages offline. E-mail status indicators: The new e-mail (offline or online mode) has not been retrieved to your device. The new e-mail has been retrieved to your device. The e-mail message has been read, and it has not been retrieved to your device. The e-mail message has been read. The e-mail heading has been read and the message content has been deleted from the device. 3 To open an e-mail message, press . If the e-mail message has not been retrieved and you are offline, you are asked if you want to retrieve this message from the mailbox. To view e-mail attachments, open a message that has the attachment indicator , and select Options > Attachments. If the attachment has a dimmed indicator, Retrieve e-mail messages automatically To retrieve messages automatically, select Options > E-mail settings > Automatic retrieval > Header retrieval > Always enabled or Only in home net., and define when and how often the messages are retrieved. Retrieving e-mail messages automatically may increase your call costs due to the data traffic. Delete e-mail messages To delete the contents of an e-mail message from the device while still retaining it in the remote mailbox, select Options > Delete. In Delete msg. from:, select Phone only. The device mirrors the e-mail headings in the remote mailbox. Although you delete the message content, the e-mail heading stays in your device. If you want to remove the heading as well, you must first delete the e-mail message from your remote mailbox, then make a connection from your device to the remote mailbox again to update the status 9243184_N71-1_en_apac.book Page 35 Friday, May 26, 2006 2:31 PM

are removed only after you have closed the connection to the remote mailbox. To cancel deleting an e-mail from the device and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options > Undelete. Disconnect from the mailbox When you are online, to end the data connection to the remote mailbox, select Options > Disconnect. View messages on a SIM card Before you can view SIM messages, you must copy them to a folder in your device. 1 In the Messag. main view, select Options > SIM messages. 2 Select Options > Mark/Unmark > Mark or Mark all Messaging settings Fill in all fields marked with Must be defined or with a red asterisk. Follow the instructions given by your service provider. You may also obtain settings from your service provider in a configuration message. Some or all message centers or access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them. Text messages Press , and select Messag. > Options > Settings > Text message and from the following: Message centres — View a list of all text message centers that have been defined. Msg. centre in use — Select which message center is used to deliver text messages. Ch t di T h t i t 9243184_N71-1_en_apac.book Page 36 Friday, May 26, 2006 2:31 PM

resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center. Message sent as — Change this option only if you are sure that your message center is able to convert text messages into these other formats. Contact your network operator. Preferred conn. — Select the connection used for sending text messages: GSM network or packet data, if supported by the network. See "Connection", on page 82. Reply via same ctr. — Select whether you want the reply message to be sent using the same text message center number (network service). Multimedia messages Press , and select Messag. > Options > Settings > Multimedia message and from the following: I i D fi h i f h i i l i di prevents you from sending messages that may not be supported. Access point in use — Select which access point is used as the preferred connection for the multimedia message center. Multimedia retrieval — Select how you want to receive multimedia messages. To receive multimedia messages automatically in your home network, select Auto. in home network. Outside your home network, you receive a notification that there is multimedia message that you can retrieve in the multimedia message center. When you are outside your home network, sending and receiving multimedia messages may cost you more. If you select Multimedia retrieval > Always automatic, your device automatically makes an active packet data connection to retrieve the message both in and outside your home network. Allow anon. msgs. — Select whether you want to reject messages from an anonymous sender 9243184_N71-1_en_apac.book Page 37 Friday, May 26, 2006 2:31 PM

your device sending delivery reports of received multimedia messages. Message validity — Select how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center. E-mail Press , and select Messag. > Options > Settings > E-mail and from the following: Mailboxes — Select a mailbox to change Connection settings, User settings, Retrieval settings, and Automatic retrieval. Mailbox in use — Select which mailbox you want to use for sending e-mail. To create a new mailbox, select Options > New mailbox i h ilb i i Password — Enter your password. If you leave this field blank, you are prompted for the password when you try to connect to your remote mailbox. Incoming mail serv. — Enter the IP address or host name of the mail server that receives your e-mail. Access point in use — Select an Internet access point (IAP). See "Connection", on page 82. Mailbox name — Enter a name for the mailbox. Mailbox type — Defines the e-mail protocol that your remote mailbox service provider recommends. The options are POP3 and IMAP4. This setting can be selected only once and cannot be changed if you have saved or exited from the mailbox settings. If you use the POP3 protocol, e-mail messages are not updated automatically when you are online. To see the latest e-mail messages, you must disconnect and make a new connection to your mailbox. Security (ports) — Select the security option used to secure the connection to the remote mailbox. 9243184_N71-1_en_apac.book Page 38 Friday, May 26, 2006 2:31 PM

you by your service provider. Replies to your messages are sent to this address. Outgoing mail serv. — Enter the IP address or host name of the mail server that sends your e-mail. You may only be able to use the outgoing server of your network operator. Contact your service provider for more information. Access point in use — Select an Internet access point (IAP). See "Connection", on page 82. The settings for User name, Password, Security (ports), and Port are similar to the ones in Incoming e-mail. User settings My name — Enter your own name. Your name replaces your e-mail address in the recipient’s device when the recipient’s device supports this function. Send message — Define how e-mail is sent from your device. Select Immediately for the device to connect to the mailbox when you select Send message. If you select New e-mail alerts — Select whether you want to receive the new e-mail indications, a tone and a note, when new mail is received to the mailbox. Default encoding — Select another encoding according to language. Retrieval settings E-mail to retrieve — Define which parts of the e-mail are retrieved: Headers only, Size limit, Messages (for IMAP4 only), or Msgs. & attachs.. Retrieval amount — Define how many new e-mail messages are retrieved to the mailbox. IMAP4 folder path (for IMAP4 only) — Define the folder path for folders to be subscribed. Folder subscriptions (for IMAP4 only) — Subscribe to other folders in the remote mailbox and retrieve content from those folders. Automatic retrieval 9243184_N71-1_en_apac.book Page 39 Friday, May 26, 2006 2:31 PM

retrieve new e-mail automatically. You can define when, and how often, the messages are retrieved. Retrieving e-mail messages automatically may increase your call costs due to the data traffic. Service messages Press , and select Messaging > Options > Settings > Service message. Select whether you want to receive service messages. If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message, select Download messages > Automatically. Cell broadcast Check the available topics and related topic numbers with your service provider. Press , and select Messaging > Options > Settings > Cell broadcast and from the following: Topic detection — Select whether the device automatically searches for new topic numbers, and saves the new numbers without a name to the topic list. Other settings Press , and select Messaging > Options > Settings > Other and from the following: Save sent messages — Select whether you want to save a copy of the text messages, multimedia messages, or e-mail that you send to the Sent folder. No. of saved msgs. — Define how many sent messages are saved to the Sent folder at a time. The default limit is 20 messages. When the limit is reached, the oldest message is deleted. Memory in use — If a compatible memory card is inserted in the device, select the memory where you want to save your messages: Phone memory or Memory card. 9243184_N71-1_en_apac.book Page 40 Friday, May 26, 2006 2:31 PM

press or . If you have set the volume to Mute, you cannot adjust the volume with the or keys. To adjust the volume, select Unmute, and press or . 1 In the standby mode, enter the phone number, including the area code. To remove a number, press . For international calls, press twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number. 2 Press to call the number. 3 Press to end the call (or to cancel the call attempt). Pressing always ends a call, even if another You must copy the contacts from your SIM card to Contacts before you can make a call this way. See "Copy contacts", on page 52. To call your voice mailbox (network service), press and hold in the standby mode. See also "Call divert", on page 88. Tip! To change the phone number of your voice mailbox, press , and select Tools > Voic. mail > Options > Change number. Enter the number (obtained from your service provider), and select OK. To call a recently dialed number in the standby mode, press . Scroll to the number you want, and press to call the number. Make a conference call 1 M k ll t th fi t ti i t 9243184_N71-1_en_apac.book Page 41 Friday, May 26, 2006 2:31 PM

call and enter the phone number. Select Options > Conference > Add to conference. Your device supports conference calls between a maximum of six participants, including yourself. To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. Once you have finished the private conversation, select Options > Conference > Add to conference to return to the conference call. To drop a participant, select Options > Conference > Drop participant, scroll to the participant, and select Drop. 4 To end the active conference call, press . Speed dial a phone number To activate speed dialing, press , and select Tools > S i C ll S d di lli O To call in the standby mode, press the speed dial key and . Voice dialing Your device supports enhanced voice commands. Enhanced voice commands are not dependent on the speaker’s voice, so the user does not record voice tags in advance. Instead, the device creates a voice tag for the entries in contacts, and compares the spoken voice tag to it. The voice recognition in the device adapts to the main user’s voice to recognize the voice commands better. The voice tag for a contact is the name or nickname that is saved on the contact card. To listen to the synthesized voice tag, open a contact card, and select Options > Play voice tag. Make a call with a voice tag Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances 9243184_N71-1_en_apac.book Page 42 Friday, May 26, 2006 2:31 PM

clearly the name or nickname that is saved on the contact card. 3 The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name and number. After a timeout of 1.5 seconds, the device dials the number. If the recognized contact was not correct, select Next to view a list of other matches or Quit to cancel voice dialing. If several numbers are saved under the name, the device selects the default number, if it has been set. Otherwise, the device selects the first available number of the following: Mobile, Mobile (home), Mobile (business), Telephone, Tel. (home), and Tel. (business). Video calls (network service) When you make a video call, you can see a real-time, two-way video between you and the recipient of the call. be made between two parties. The video call can be made to a compatible mobile device or ISDN client. Video calls cannot be made while there is another voice, video, or data call active. Icons: You are not receiving video (the recipient is not sending video or the network is not transmitting it). You have denied video sending from your device. To send a still image instead, see "Call settings", on page 81. 1 To start a video call, open the cover, enter the phone number in the standby mode, or select Contacts and a contact. 2 Select Options > Call > Video call. 3 Activate the camera after the call recipient has answered the call. Starting a video call may take a 9243184_N71-1_en_apac.book Page 43 Friday, May 26, 2006 2:31 PM

and hear the sound through the loudspeaker. The call recipient may deny video sending ( ), in which case you hear the sound and may see a still image or a grey background graphic. Tip! To increase or decrease the volume during a call, scroll left or right. To change between showing video or hearing only sound, select Enable or Disable > Sending video, Sending audio or Sending audio & video. To send live video image of yourself, select Use second. cam. to switch on the secondary camera. To show the other party the view visible from the back camera, select Use main camera. To zoom your own image, select Zoom in or Zoom out. The zoom indicator is shown on the top of the display. To switch the places of the sent video images on the display, select Change image order. Note: Even if you have denied video sending during Video sharing (network service) Use Video sharing to send live video or a video clip from your mobile device to another compatible mobile device during a voice call. Simply invite a recipient to view the live video or a video clip you want to share. Sharing begins automatically when the recipient accepts the invitation, and you activate the correct mode. See "Share video", on page 45. Video sharing requirements Because Video sharing requires a UMTS connection, your ability to use Video sharing depends on 3G network availability. Contact your service provider for questions about network availability and fees associated with using this application. To use Video sharing you must do the following: • Ensure that your device is set up for person-to-person connections. See "Settings", on page 45. • Ensure you have an active UMTS connection and are 9243184_N71-1_en_apac.book Page 44 Friday, May 26, 2006 2:31 PM

registered to the UMTS network. If you invite someone to a sharing session and that person has their device turned off, or that person is not within UMTS network coverage, they do not know that you are sending an invitation. However, you receive an error message that the recipient cannot accept the invitation. Settings Person-to-person connection settings A person-to-person connection is also known as a session initiation protocol (SIP) connection. The SIP profile settings must be configured in your device before you can use Video sharing. Setting up a SIP profile allows you to establish a live person-to-person connection to another compatible device. The SIP profile must also be established to receive a sharing session. Ask your network operator or service provider for the SIP profile settings, and save them in your device. Your address. Enter the SIP address in the following format: sip:username@domainname (you can use an IP address instead of a domain name). UMTS connection settings To set up your UMTS connection, do the following: • Contact your service provider to establish an agreement for you to use the UMTS network. • Ensure that your device UMTS access point connection settings are configured properly. For help, see "Connection", on page 82. Share video To receive a sharing session, the recipient must install Video sharing and configure the required settings on their mobile device. You and the recipient must both be registered to the service before you can start sharing. To receive share invitations, you must be registered to the service, have an active UMTS connection, and be within the UMTS network coverage 9243184_N71-1_en_apac.book Page 45 Friday, May 26, 2006 2:31 PM

card, select the SIP address to which you want to send the invitation, and Select to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. Select OK to send the invitation. 3 Sharing begins automatically when the recipient accepts the invitation. The loudspeaker is active. You can also use a compatible headset to continue your voice call while you share live video. 4 Select Pause to pause the sharing session. Select Continue to resume sharing. 5 To end the sharing session, select Stop. To end the voice call, press . Video clip 1 When a voice call is active, select Options > Share video > Clip. A list of video clips opens. 2 Select a video clip you want to share. A preview view opens To preview the clip select Options > Play In case the recipient has several SIP addresses in the contact card, select the SIP address to which you want to send the invitation, and Select to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. Select OK to send the invitation. 4 Sharing begins automatically when the recipient accepts the invitation. 5 Select Pause to pause the sharing session. Select Options > Continue to resume sharing. 6 To end the sharing session, select Stop. To end the voice call, press . Accept an invitation When someone sends you a share invitation, an invitation message is displayed showing the sender’s name or SIP address. If your device is not set to Silent, it rings when you receive an invitation. If someone sends you a share invitation and you are not within UMTS network coverage you will not know that 9243184_N71-1_en_apac.book Page 46 Friday, May 26, 2006 2:31 PM

message that you rejected the invitation. You can also press to decline the sharing session and disconnect the voice call. To end the sharing session, select Stop. If you share a video clip, select Exit. Video sharing ended is displayed. Answer or reject a call To answer the call if the cover is open, press . If the cover is closed, open the cover, and the call will be answered automatically. See "Cover display settings", on page 81. To mute the ringing tone when a call comes in, select Silence. If the cover is closed, press the cover key to select Silence. Tip! If a compatible headset is connected to the device, to answer and end a call, press the headset key. If the cover is open and you do not want to answer a call When you reject an incoming call, you can also send a text message to the caller informing why you cannot answer the call. Select Options > Send text message. You can edit the text before sending it. To set up this option and write a standard text message, see "Call settings", on page 81. If you answer a voice call during a video call, the video call is dropped. Call waiting is not available during a video call. Answer or reject a video call When a video call arrives, is displayed. 1 Press to answer the video call. Allow video image to be sent to caller? is shown. If you select Yes, the image being captured by the camera in your device is shown to the caller. If you select No, or do nothing, video sending is not activated, and you hear a sound. A grey screen is shown in place of the video. To replace this grey screen i h ill i "C ll i " 9243184_N71-1_en_apac.book Page 47 Friday, May 26, 2006 2:31 PM

environments and events (for example, when you want your device to be silent), see "Profiles — set tones", on page 70. To answer the waiting call, press . The first call is put on hold. To switch between the two calls, select Swap. To connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls, select Options > Transfer. To end the active call, press . To end both calls, select Options > End all calls. Options during a voice call Many of the options that you can use during a voice call are network services. Select Options during a call for some of the following options: Mute or Unmute, Answer, Reject, Swap, Hold or Unhold, Activate handset, Activate loudsp., or Activate handsfree (if a compatible headset with Bluetooth connectivity is attached), End Send MMS (in UMTS networks only) — To send an image or a video in a multimedia message to the other participant of the call. You can edit the message and change the recipient before sending. Press to send the file to a compatible device (network service). Send DTMF — To send DTMF tone strings, for example, a password. Enter the DTMF string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press repeatedly. Select OK to send the tone. Tip! You can add DTMF tones to the Phone number or DTMF fields in a contact card. Tip! If you select Activate loudsp., you can close the cover and continue the call. Options during a video call Select Options during a video call for the following options: Enable or Disable, Activate handset (if a compatible headset with Bluetooth connectivity is 9243184_N71-1_en_apac.book Page 48 Friday, May 26, 2006 2:31 PM

dialed calls, press , and select My own > Log > Recent calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and has network coverage. Tip! When you see a note in the standby mode about missed calls, select Show to access the list of missed calls. To call back, scroll to a name or number, and press . To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options > Clear list. To clear an individual event, open a register, scroll to the event, and press . To set the display of the call duration while a call is active, select My own > Log > Options > Settings > Show call duration > Yes or No. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth. To clear call duration timers, select Options > Clear timers. For this you need the lock code, see "Security", on page 85 and "Phone and SIM", on page 85. Packet data To check the amount of data sent and received during packet data connections, press , and select My own > Log > Packet data. For example, you may be charged for your packet data connections by the amount of data sent and received. Monitor all communication events I i L 9243184_N71-1_en_apac.book Page 49 Friday, May 26, 2006 2:31 PM

calls, text messages, or data connections registered by the device, press , select My own > Log, and press to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event and create new contact cards based on the log information. Tip! To see the duration of a voice call on the main display during an active call, select Options > Settings > Show call duration > Yes. Tip! To view a list of sent messages, press , and select Messaging > Sent. S b t h t t t i th To filter the log, select Options > Filter and a filter. To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options > Clear log. Select Yes to confirm. To remove a single event from the log, press . To set the Log duration, select Options > Settings > Log duration. The log events remain in the device memory for a set number of days after which they are automatically erased to free memory. If you select No log, all the log contents, recent calls register, and messaging delivery reports are permanently deleted. To view the details of a communication event, in the general log view scroll to an event, and press . Tip! In the details view, to copy a phone number to the clipboard and paste it to a text message, select Options > Copy Number. Packet data counter and connection timer: To view how much data, measured in kilobytes, is transferred and how long a certain packet data connection lasts scroll to an 9243184_N71-1_en_apac.book Page 50 Friday, May 26, 2006 2:31 PM

personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, that allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See "Data and settings", on page 33. Contact information can only be sent to or received from compatible devices. Save names and numbers 1 Select Options > New contact. 2 Fill in the fields that you want, and select Done. To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options > Edit. Tip! To print contact cards on a compatible basic Tip! To add and edit contact cards, use Nokia Contacts Editor available in Nokia PC Suite. To attach a small thumbnail image to a contact card, open the contact card, and select Options > Edit > Options > Add thumbnail. The thumbnail image is shown when the contact calls. Tip! Speed dialing is a quick way to call frequently used numbers. You can assign speed dialing keys to eight phone numbers. See "Speed dial a phone number", on page 42. Tip! To send contact information, select the card you want to send. Select Options > Send > Via text message, Via multimedia, Via Bluetooth, or Via infrared. See "Messaging", on page 28 and "Send data", on page 74. To add a contact to a group select Options > Add to 9243184_N71-1_en_apac.book Page 51 Friday, May 26, 2006 2:31 PM

You can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialing. 1 In Contacts, select a contact, and press . 2 Select Options > Defaults. 3 Select a default to which you want to add a number or an address, and select Assign. 4 Select a number or an address you want to set as a default. The default number or address is underlined in the contact card. Copy contacts To copy names and numbers from a SIM card to your device, press , and select Contacts > Options > SIM Tip! You can synchronize your contacts to a compatible PC with Nokia PC Suite. SIM directory and services For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. Press , and select Contacts > Options > SIM contacts > SIM directory to see the names and numbers stored on the SIM card. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls. To view the list of fixed dialing numbers, select Options > SIM contacts > Fixed dialling contacts. This setting is only shown if supported by your SIM card. To restrict calls from your device to selected phone numbers, select Options > Activ. fixed dialling. To add new numbers to the fixed dialing list, select Options > New SIM contact. You need the PIN2 code for these functions 9243184_N71-1_en_apac.book Page 52 Friday, May 26, 2006 2:31 PM

the official emergency number programmed into your device. Add ringing tones for contacts When a contact or group member calls you, the device plays the chosen ringing tone (if the caller’s phone number is sent with the call and your device recognizes it). 1 Press to open a contact card or go to the groups list, and select a contact group. 2 Select Options > Ringing tone. A list of ringing tones opens. 3 Select the ringing tone you want to use for the individual contact or the selected group. Create contact groups 1 In Contacts, press to open the groups list. 2 Select Options > New group. 5 Scroll to a contact, and press to mark it. To add multiple members at a time, repeat this action on all the contacts you want to add. 6 Select OK to add the contacts to the group. To rename a group, select Options > Rename, enter the new name, and select OK. Remove members from a group 1 In the groups list, open the group you want to modify. 2 Scroll to the contact, and select Options > Remove from group. 3 Select Yes to remove the contact from the group. Tip! To check to which groups a contact belongs, scroll to the contact, and select Options > Belongs to groups. 9243184_N71-1_en_apac.book Page 53 Friday, May 26, 2006 2:31 PM

designed for mobile devices. These pages use the wireless markup language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML). Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services. Press , and select Services. Shortcut: To start a connection, press and hold in the standby mode. Services access point To access pages, you need service settings for the page that you want to use. You may receive the settings in a Enter settings manually 1 Press , select Tools > Settings > Connection > Access points, and define the settings for an access point. Follow the instructions given to you by your service provider. See "Connection", on page 82. 2 Press , and select Services > Options > Bookmark manager > Add bookmark. Write a name for the bookmark and the address of the page defined for the current access point. 3 To set the created access point as the default access point, select Options > Settings > Access point. Bookmarks view The bookmarks view opens when you open Services. Your device may have some bookmarks loaded for sites not affiliated with Nokia Nokia does not warrant or endorse 9243184_N71-1_en_apac.book Page 54 Friday, May 26, 2006 2:31 PM

is displayed during a connection, the data transmission between the device and the Internet gateway or server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server. Select Options > Details > Security to view details about the connection, encryption status, and information about server and user authentication. Security certificates may be required for some services, such as banking services. For more information, contact your service provider. See also "Certif. management", on page 86. Browse To go to the previous page while browsing, select Back. If Back is not available, select Options > Navigation options > History to view miniatures of pages visited (or a list of pages visited) during a browsing session. To retrieve the latest content from the server, select Options > Navigation options > Reload. To save a bookmark, select Options > Save as bookmark. Tip! To access the bookmarks view while browsing, press and hold . To return to the browser view, select Options > Back to page. To save a page while browsing, select Options > Advanced options > Save page (this option may not be available). You can save pages to the device memory or a compatible memory card (if inserted), and browse them when offline. To access the pages later, press in the bookmarks view to open the Saved pages view. To enter a new URL address, select Options > Navigation options > Go to web address. 9243184_N71-1_en_apac.book Page 55 Friday, May 26, 2006 2:31 PM

Options to pause, resume, or cancel ongoing downloads, or open, save, or delete completed downloads. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. Download and purchase items You can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your device. For example, a downloaded photo can be saved in Gallery. Important: Only install and use applications and End a connection To end the connection and view the browser page offline, select Options > Advanced options > Disconnect. To end the connection and close the browser, select Options > Exit. Empty the cache The information or services you have accessed are stored in the cache memory of the device. A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache, select Options > Advanced options > Clear cache. Services settings S l t O ti S tti d f th f ll i 9243184_N71-1_en_apac.book Page 56 Friday, May 26, 2006 2:31 PM

images while browsing. If you select No, to load images later during browsing, select Options > Show images. Font size — Select the text size. Default encoding — If text characters are not shown correctly, you can select another encoding according to language. Auto. bookmarks — Enable or disable automatic bookmark collecting. If you want to continue collecting automatic bookmarks but hide the folder from the bookmarks view, select Hide folder. Screen size — Select what is shown when you are browsing: Select. keys only or Full screen. Homepage — Define the home page. Search page — Define a Web page that is downloaded when you select Navigation options > Open search page in the bookmarks view, or when browsing. Volume — If you want the browser to play sounds embedded on Web pages, select a volume level. Rendering — If you want the page layout shown as accurately as possible when in Small screen mode, select By quality. If you do not want external cascading style sheets to be downloaded, select By speed. Cookies — Enable or disable the receiving and sending of cookies. Java/ECMA script — Enable or disable the use of scripts. Security warnings — Hide or show security notifications. Conf. DTMF sending — Select whether you want to confirm before the device sends touch tones during a voice call. See also "Options during a voice call", on page 48. 9243184_N71-1_en_apac.book Page 57 Friday, May 26, 2006 2:31 PM

music player, you can play music files and create and listen to playlists. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Add music When you open the music player for the first time, the player searches the device memory for music files to create a music library. Play music When you open the music player, the previously played track or playlist is displayed. To view the music library, select Options > Music library and the desired song list. To start playing the songs in the view, select Options > Play. When a song is playing, to change between play and pause, press and . To stop a song, press . To fast forward or rewind, press and hold or . To start playing the next or previous song, press or . To save the song list as a playlist, select Options > Add to track list, and create a new playlist, or select a saved playlist. To adjust the volume, press or . 9243184_N71-1_en_apac.book Page 58 Friday, May 26, 2006 2:31 PM

in the background, press to return to the standby mode. To return to the application, press , and select Music player. To open your Web bookmarks for downloading music, select Options > Track downloads. To return to the standby mode and leave the music playing in the background, select Options > Play in background. Music library To view the music library, select Options > Music library. All tracks lists all music. To view sorted songs, select Artists, Albums, Genres, or Composers. The album, artist, genre, and composer information is collected from the ID3 or M4A tags of the song files, if available. To add songs, albums, artists, genres, or composers to a playlist, select the items and Options > Add to track list. You can create a new playlist or add to an existing one. T i l li l T k li T Visual Radio (network service) You can use the Visual Radio application as a traditional FM radio with automatic tuning and saved stations. If you tune to stations that offer Visual Radio service, you can view visual information on the display related to the radio program. The Visual Radio service uses packet data (network service). You can listen to the FM radio while using other applications. To use the Visual Radio service, the following conditions are required: • The device must be switched on. • The device must have a valid SIM card inserted. • The station you listen to and the network operator you use must support this service. • An Internet access point must be defined to access the operator’s visual radio server. See "Access points", on page 83. • The station must have the correct Visual Radio service 9243184_N71-1_en_apac.book Page 59 Friday, May 26, 2006 2:31 PM

wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. You can listen to the radio with the built-in loudspeaker or a compatible headset. When using the loudspeaker, keep the headset plugged in the device. The lead of the headset functions as the antenna of the radio, so let it hang freely. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. You can make a call or answer an incoming call while listening to the radio. The radio is turned off when there is an active call, and will restart automatically when the call is ended. The radio selects the used frequency band based on the Listen to the radio Note that the quality of the radio broadcast depends on the coverage of the radio station in that particular area. Connect a compatible headset to the device. The lead of the headset functions as the radio antenna, so let it hang freely. Press , and select My own > Radio. To start a station search, select or . Searching stops when a station is found. To change the frequency manually, select Options > Manual tuning. If you have previously saved radio stations, select or to go to the next or previous saved station. To select the memory location of a station press the corresponding number key. To adjust the volume, press or . To listen to the 9243184_N71-1_en_apac.book Page 60 Friday, May 26, 2006 2:31 PM

Options > Save station. To open the list of your saved stations, select Options > Stations. See "Saved stations", on page 61. To return to the standby mode and leave the FM radio playing in the background, select Options > Play in background. View visual content To check availability and costs, and to subscribe to the service, contact your network operator or service provider. To view available visual content for a tuned station, select or Options > Start visual service. If the visual service ID has not been saved for the station, enter it, or select Retrieve to search for it in the station directory (network service). When the connection to the visual service is established, the display shows the current visual content designed by the content provider Saved stations You can save up to 20 radio stations in Visual Radio. To open your station list, select Options > Stations. To listen to a saved station, select Options > Station > Listen. To change station details, select Options > Station > Edit. Settings Select Options > Settings and from the following: Start-up tone — To select a tone to play when the application is started. Auto-start service — To have the Visual Radio service start automatically when you select a saved station that offers visual service, select Yes. Access point — To select the access point used for the data connection. You do not need an access point to use 9243184_N71-1_en_apac.book Page 61 Friday, May 26, 2006 2:31 PM

Instant messaging (IM) allows you to converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can log in to after you register to an IM service. Service providers may differ in their support of features. Select Conversations to start or continue a conversation with an IM user; IM contacts to create, edit, or view the online status of your IM contacts; IM groups to start or continue a group conversation with multiple IM users; or Record. chats to view a previous IM session that you saved. Check the availability of services, pricing, instructions, and fees with your network operator or service provider. Connect to an IM server 1 To connect to the IM server in use, open IM, and select Options > Login. To change the IM server in use and save new IM servers, see "Chat server settings", on page 64. 2 Enter your user ID and password, and press to log in. You obtain the user ID and password for the IM server from your service provider. 3 To log out, select Options > Logout. Modify your IM settings Select Options > Settings > IM settings and from the following: Use screen name (shown only if IM groups are supported by the server) — To enter a nickname, select Yes. IM presence — To allow others to see if you are online, select Active for all. Allow messages from — To allow messages from all, select 9243184_N71-1_en_apac.book Page 62 Friday, May 26, 2006 2:31 PM

sorted: Alphabetically or By online status. Availabil. reloading — To select how to update information about whether your IM contacts are online or offline, select Automatic or Manual. Offline contacts — To select whether IM contacts with an offline status are shown in the IM contacts list. Search for IM groups and users To search for groups, in the IM groups view, select Options > Search. You can search by Group name, Topic, and Members (user ID). To search for users, in the IM contacts view, select Options > New IM contact > Search from server. You can search by User's name, User ID, Phone number, and E-mail address. Join IM groups Chat After you join an IM group, you can view the messages that are exchanged there, and send your own messages. To send a message, write the message in the message editor field, and press . To send a private message to a participant, select Options > Send private msg.. To reply to a private message sent to you, select the message and Options > Reply. To invite IM contacts who are online to join the IM group, select Options > Send invitation. To prevent receiving messages from certain participants, select Options > Blocking options and the desired option. Record chats To record the messages that are exchanged during a conversation or while you are joined in a IM group, select Options > Record chat. To stop recording, select 9243184_N71-1_en_apac.book Page 63 Friday, May 26, 2006 2:31 PM

automatically closed when you exit IM. To view a conversation, scroll to a participant, and press . To continue the conversation, write your message, and press . To return to the conversations list without closing the conversation, select Back. To close the conversation, select Options > End conversation. To start a new conversation, select Options > New conversation. To save a conversation participant to your IM contacts, select Options > Add to IM contacts. To send automatic replies to incoming messages, select Options > Set auto reply on. You can still receive messages. IM contacts Chat server settings Select Options > Settings > Server settings. You may receive the settings in a special text message from the network operator or service provider that offers the chat service. You obtain the user ID and password from your service provider when you register to the service. If you do not know your user ID or password, contact your service provider. Servers — View a list of all defined IM servers. Default server — Change the IM server to which you want to connect. IM login type — To log in automatically when you start IM, select On app. start-up. To add a new server to your list of IM servers, select Servers > Options > New server. Enter the following settings: Server name — the name for the chat server A i t i th i t t t f 9243184_N71-1_en_apac.book Page 64 Friday, May 26, 2006 2:31 PM

Press , and select My own > Go to. Default shortcuts are the following: opens Calendar, opens Inbox, and opens Notes. Games Press , and select My own and a game. For instructions on how to play the game, select Options > Help. 9243184_N71-1_en_apac.book Page 65 Friday, May 26, 2006 2:31 PM

and to keep track of your tasks and other notes. Create calendar entries Shortcut: In the day, week, or month calendar view, press any key ( — ). An appointment entry opens, and the characters you enter are added to the Subject field. 1 Press , and select Calendar > Options > New entry and one of the following: Meeting — to remind you of an appointment that has a specific date and time To-do — to remind you of a task that needs doing by a specific date 2 Fill in the fields. To set an alarm, select Alarm > On, and enter the Alarm time and Alarm date. To add a description for a meeting, select Options > Add description. 3 To save the entry, select Done. When the calendar alarm occurs, select Silence to turn off the calendar alarm tone. The reminder text stays on the screen. To end the calendar alarm, select Stop. To set the alarm to snooze, select Snooze. Tip! You can synchronize your calendar with a compatible PC using Nokia PC Suite. When creating a calendar entry, set the desired Synchronisation option. 9243184_N71-1_en_apac.book Page 66 Friday, May 26, 2006 2:31 PM

marked with a small triangle in the right bottom corner. In the week view, memos and anniversaries are placed before 8 a.m. To switch between the month view, week view, day view, and to-do view, press . To go to a certain date, select Options > Go to date. To jump to today, press . To send a calendar note to a compatible device, select Options > Send. To print calendar entries on a compatible basic print profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print. Manage your calendar entries Deleting past entries in Calendar saves space in your device memory. To delete more than one event at a time, go to the month view, and select Options > Delete entry > Before date or All entries. To mark a task as completed, scroll to it in the to-do view, and select Options > Mark as done. Calendar settings To modify the Calendar alarm tone, Default view, Week starts on, and Week view title, select Options > Settings. 9243184_N71-1_en_apac.book Page 67 Friday, May 26, 2006 2:31 PM

roots and percentages, press , and select Office > Calculator. Note: This calculator has limited accuracy and is designed for simple calculations. Converter To convert measures from one unit to another, press , and select Office > Converter. Converter has limited accuracy, and rounding errors may occur Set base currency and exchange rates Select Type > Currency > Options > Currency rates. Before you can make currency conversions, you must select a base currency and add exchange rates. The rate of the base currency is always 1. Note: When you change base currency, you must enter new rates because all previously set exchange rates are cleared. Notes To write notes, press , and select Office > Notes. You can send notes to compatible devices, and save plain text files (.txt format) that you receive to Notes. 9243184_N71-1_en_apac.book Page 68 Friday, May 26, 2006 2:31 PM

, and select Office > Recorder. To record a telephone conversation, open Recorder during a voice call. Both parties hear a tone every 5 seconds during recording. The recorder cannot be used when a data call or GPRS connection is active. 9243184_N71-1_en_apac.book Page 69 Friday, May 26, 2006 2:31 PM

Personalize your device The open applications and folders that have applications open are indicated by a small icon in the main menu. • To use the standby display for fast access to your most frequently used applications, see "Active standby mode", on page 72. • To change the standby mode background image or what is shown in the screen saver, see "Change the look of your device", on page 71. • To customize the ringing tones, see "Profiles — set tones", on page 70 and "Add ringing tones for contacts", on page 53. • To change the shortcuts i d f th diff t • To change the welcome note to an image, press , and select Tools > Settings > Phone > General > Welcome note / logo. • To change the main menu view, in the main menu, select Options > Change view > Grid or List. • To rearrange the main menu, in the main menu, select Options > Move, Move to folder, or New folder. You can move less used applications into folders, and place applications that you use more often into the main menu. Profiles — set tones To set and customize the ringing tones, message alert tones, and other tones for different events, environments, or caller groups, press , and select Tools > Profiles. 9243184_N71-1_en_apac.book Page 70 Friday, May 26, 2006 2:31 PM

To modify a profile, press , and select Tools > Profiles. Scroll to the profile, and select Options > Personalise. Scroll to the setting you want to change, and press to open the choices. Tones stored on the memory card are indicated with . You can scroll through the tone list and listen to each one before you make your selection. To stop the sound, press any key. When you choose a tone, Tone downloads opens a list of bookmarks. You can select a bookmark and start connection to a Web page to download tones. If you want the caller’s name to be said when your device rings, select Options > Personalise > Say caller's name > On. The caller’s name must be saved in Contacts. To create a new profile, select Options > Create new. Offline profile The Offline profile lets you use the device without connecting to the wireless network. When you activate the Offline profile the connection to the wireless network is Warning: In the offline profile you cannot make or receive any calls, except make calls to certain emergency numbers, or use other features that require network coverage. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code. To leave the Offline profile, press , and select another profile. The device re-enables wireless transmissions (providing there is sufficient signal strength). If a Bluetooth connection is activated before entering the Offline profile, it will be deactivated. A Bluetooth connection is automatically reactivated after leaving the Offline profile. See "Settings", on page 73. Change the look of your device To change the look of the display, such as the wallpaper and icons press and select Tools > Themes The active 9243184_N71-1_en_apac.book Page 71 Friday, May 26, 2006 2:31 PM

to use the themes saved in the memory card without the memory card, save the themes in the device memory first. To open a browser connection and download more themes, select Theme downloads. To activate a theme, scroll to it, and select Options > Apply. To preview a theme before activating it, select Options > Preview. To edit themes, scroll to a theme, and select Options > Edit to change the Wallpaper and Power saver settings. To restore the selected theme to its original settings, select Options > Restore orig. theme when you edit a theme. Active standby mode Use your standby display for fast access to your most frequently used applications. By default, the active standby mode is on. P l t T l S tti Ph St db The active standby display is shown with default applications across the top of the screen, and calendar, to-do, and player events listed below. Scroll to an application or event, and press . The standard scroll key shortcuts available in the standby mode cannot be used when the active standby mode is on. To change the default applications shortcuts, press , select Tools > Settings > Phone > Standby mode > Active standby apps., and press . Some shortcuts may be fixed, and you are not able to change them. 9243184_N71-1_en_apac.book Page 72 Friday, May 26, 2006 2:31 PM

with wireless Bluetooth technology. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth connectivity to send images, video clips, music and sound clips, and notes; connect wirelessly to your compatible PC (for example, to transfer files); and connect to a compatible printer to print images with Image print. See "Image print", on page 22. Since devices with Bluetooth technology communicate using radio waves, your device and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (33 feet) of each other, but the connection may be subject to interference from Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device. Glossary: A profile corresponds to a service or a function, and defines how different devices connect. For example, the handsfree profile is used between a handsfree device and your device. For devices to be compatible, they must support the same profiles. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life. When the device is locked, you cannot use Bluetooth connectivity See "Security" on page 85 for more 9243184_N71-1_en_apac.book Page 73 Friday, May 26, 2006 2:31 PM

Shown to all, your device and this name can be seen by other users with devices using Bluetooth technology. Select from the following: Bluetooth — To connect wirelessly to another compatible device, set Bluetooth connectivity On, and establish a connection. My phone's visibility — To allow your device to be found by other devices with Bluetooth technology, select Shown to all. To hide it from other devices, select Hidden. My phone's name — Edit the name of your device. Remote SIM mode — To enable another device, such as a compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On. Remote SIM mode To use the remote SIM mode with a compatible car kit enhancement, set Bluetooth connectivity on, and enable the use of the remote SIM mode with your device Before the wireless network is turned off, as indicated by in the signal strength indicator area, and you cannot use SIM card services or features requiring cellular network coverage. When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into your device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been locked, enter the code to unlock it first. To leave the remote SIM mode, press , and select Exit rem. SIM mode. Security tips When you are not using Bluetooth connectivity, select Bluetooth > Off or My phone's visibility > Hidden. Do not pair with an unknown device. 9243184_N71-1_en_apac.book Page 74 Friday, May 26, 2006 2:31 PM

• When is shown in the standby mode, Bluetooth connectivity is on. • When is blinking, your device is trying to connect with another device. • When is shown continuously, data is being transmitted. Tip! To send text, open Notes, write the text, and select Options > Send > Via Bluetooth. 1 Open the application where the item you want to send is stored. For example, to send an image to another compatible device, open Gallery. 2 Select the item and Options > Send > Via Bluetooth. Devices with Bluetooth technology within range start to appear on the display. Device icons: — computer, — phone, — audio or video device, and — other device. To interrupt the search, select Stop. 3 Select the device with which you want to connect. 4 If the other device requires pairing before data can be Tip! When searching for devices, some devices may show only the unique address (device address). To find the unique address of your device, enter the code *#2820# in the standby mode. Pair devices To open the paired devices view ( ), in the Bluetooth application main view, press . Before pairing, create your own passcode (1—16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once. To pair with a device, select Options > New paired device. Devices with wireless Bluetooth technology within range start to appear on the display. Select the device, and enter the passcode. The same passcode must be entered on the other device as well. After pairing, the device is saved to the paired devices view. Paired devices are indicated by in the device search 9243184_N71-1_en_apac.book Page 75 Friday, May 26, 2006 2:31 PM

trust. indicates authorized devices in the paired devices view. Set as unauthorised — Connection requests from this device must be accepted separately every time. To cancel a pairing, scroll to the device, and select Options > Delete. If you want to cancel all pairings, select Options > Delete all. Tip! If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately, and the connection is switched off. Receive data When you receive data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept, is shown, and the item is placed in the Inbox folder in Messag.. Messages received through Bluetooth connectivity are indicated by See Infrared connection With infrared (IR), you can transfer data such as business cards, calendar notes, and media files with a compatible device. Do not point the IR beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product. Send and receive data: 1 Make sure that the IR ports of the sending and receiving devices are pointing at each other, and that there are no obstructions between the devices. The preferable distance between the two devices is up to 1 meter (3 feet). 2 The user of the receiving device activates the IR port. To activate the IR port of your device to receive data, press , and select Connect. > Infrared. 3 The user of the sending device selects the desired IR f i h d f 9243184_N71-1_en_apac.book Page 76 Friday, May 26, 2006 2:31 PM

in Messaging. New IR messages are indicated by . When blinks, your device is trying to connect to the other device or a connection has been lost. When is shown continuously, the IR connection is active, and your device is ready to send and receive data using its IR port. Data cbl. To select the function for which the USB data cable connection is used, press , and select Connect. > Data cbl. > Ask on connection, PC Suite, Data transfer. PC connections You can use your device with a variety of PC connectivity and data communications applications. For example, with Your device as a modem You can use your device as a modem to send and receive e-mail, or to connect to the Internet with a compatible PC by using Bluetooth connectivity, infrared, or a USB data cable. Detailed installation instructions can be found in the user guide for Nokia PC Suite. Tip! When using Nokia PC Suite for the first time, to connect your device to a compatible PC and to use Nokia PC Suite, use the Get Connected wizard available in Nokia PC Suite. Connection manager Press , and select Connect. > Conn. mgr.. To view the status of data connections or end connections in GSM and UMTS network, select Act. data conn.. Data connections 9243184_N71-1_en_apac.book Page 77 Friday, May 26, 2006 2:31 PM

close all open connections, select Options > Disconnect all. To view the details of a connection, select Options > Details. The details shown depend on the connection type. Synchronization Press , and select Connect. > Sync. Sync enables you to synchronize your notes, calendar, contacts, or e-mail with various compatible calendar and address book applications on a compatible computer or on the Internet. You can also create or edit synchronization settings. The synchronization application uses SyncML technology for synchronization. For information on SyncML compatibility, contact the supplier of the application with which you want to synchronize your device data. You may receive synchronization settings in a special text 1 Select a synchronization profile and Options > Synchronise. The status of the synchronization is shown on the display. To cancel synchronization before it finishes, select Cancel. You are notified when the synchronization is complete. 2 To view the log file showing the synchronization status and how many entries have been added, updated, deleted, or discarded (not synchronized) in your device or on the server, select Yes. Device manager Press , and select Connect. > Dev. mgr.. You may receive server profiles and different configuration settings from your network operator, service provider, or company information management department. These configuration settings may include access point settings for data connections and other settings used by different 9243184_N71-1_en_apac.book Page 78 Friday, May 26, 2006 2:31 PM

Contact your service provider for the correct settings. Server name — Enter a name for the configuration server. Server ID — Enter the unique ID to identify the configuration server. Server password — Enter a password to identify your device to the server. Access point — Select an access point to be used when connecting to the server. Host address — Enter the URL address of the server. Port — Enter the port number of the server. User name and Password — Enter your user name and password. Allow configuration — To receive configuration settings from the server, select Yes. Auto-accept all reqs. — If you want your device to ask for 9243184_N71-1_en_apac.book Page 79 Friday, May 26, 2006 2:31 PM

, and select Tools > Settings. To open a settings group, press . Scroll to a setting you want to change, and press . Some settings may be preset for the device by your network operator or service provider, and you may not be able to change them. Phone sett. General Phone language — Changing the language of the display texts in your device also affects the format used for date change remains effective until you change these settings again. Writing language — Changing the language affects the characters and special characters available when writing text and the predictive text dictionary used. Predictive text — Set the predictive text input On or Off for the editors in the device. The predictive text dictionary is not available for all languages. Welcome note / logo — The welcome note or logo is displayed briefly each time you switch on the device. Select Default to use the default image, Text to write a welcome note, or Image to select an image from Gallery. Orig. phone settings — You can reset some of the settings to their original values. To do this, you need the lock code. See "Security", on page 85, "Phone and SIM", on page 86. After resetting the device may take a longer time to power 9243184_N71-1_en_apac.book Page 80 Friday, May 26, 2006 2:31 PM

) in the standby mode. Right selection key — Assign a shortcut to ( ) in the standby mode. Active standby apps. — Select the application shortcuts you want to appear in the active standby. This setting is only available if Active standby is on. You can also assign keypad shortcuts for the different presses of the scroll key. The scroll key shortcuts are not available if the Active standby is on. Operator logo — This setting is only available if you have received and saved an operator logo. Select Off if you do not want the logo to be shown. Display Brightness — Adjust the basic brightness level of the display to lighter or darker. However, in extreme light conditions, the brightness of the display is automatically adjusted. Cover display settings Brightness — You can change the brightness of the cover display to lighter or darker. Changing the brightness of the cover display does not affect the brightness of the main display. Wallpaper — Select and crop a background image. Power saver — Select the cover display power saver type, its time-out period, and if an image or an animation screen saver is shown after the time-out period before the power saver is activated. Call settings Send my caller ID — You can set your phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling, or the value may be set by your network operator or service provider when you make a subscription (Set by network) (network service). 9243184_N71-1_en_apac.book Page 81 Friday, May 26, 2006 2:31 PM

informing why you could not answer the call, select Yes. See "Answer or reject a call", on page 47. Message text — Write a text to be sent in a text message when you reject a call. Image in video call — You can deny video sending when you receive a video call. Select a still image to be displayed instead of video. Automatic redial — To set your device to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press . Summary after call — Activate this setting if you want the device to briefly display the approximate duration of the last call. Speed dialling — To dial numbers assigned to the speed dialing keys ( — ) press and hold the key. See also "Speed dial a phone number", on page 42. you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode. Tip! To switch between the phone lines, press and hold in the standby mode. Line change — To prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code. Answer if fold opened — Select On to answer calls by opening the cover. Connection Data connections and access points Your device supports packet data connections, such as GPRS in the GSM network. When you use your device in GSM and UMTS networks, multiple data connections can be active at the same time, and access points can share a 9243184_N71-1_en_apac.book Page 82 Friday, May 26, 2006 2:31 PM

and connect to the Internet Check the type of access point you need with your service provider for the service you want to access. For availability and subscription to packet data connection services, contact your network operator or service provider. Access points You may receive access point settings in a message from a service provider. See "Data and settings", on page 33. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them. indicates a protected access point. indicates a packet data access point. To create a new access point, select Options > New access point. To edit the settings of an access point, select Options > Edit. Follow the instructions from your service provider. left empty, unless you have been instructed otherwise by your service provider. To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card. Packet data Follow the instructions from your service provider. Access point name — Obtain the access point name from your network operator or service provider. User name — The user name may be needed to make a data connection, and is usually provided by the service provider. Prompt password — If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes. Password — A password may be needed to make a data connection, and is usually provided by the service provider. 9243184_N71-1_en_apac.book Page 83 Friday, May 26, 2006 2:31 PM

following settings: Network type — Select the Internet protocol type: IPv4 settings or IPv6 settings. The other settings depend on the selected network type. Phone IP address (for IPv4 only) — Enter the IP address of your device. DNS address — In Primary name serv.:, enter the IP address of the primary DNS server. In Second. name server:, enter the IP address of the secondary DNS server. Contact your Internet service provider to obtain these addresses. Proxy serv. address — Define the address for the proxy server. Proxy port number — Enter the proxy port number. Homepage — Define a home page. Select Options > Advanced settings and from the following: IPv6 settings > DNS address — Select Automatic, Well- known, or User defined. Ad-hoc channel (only for Ad-hoc) — To enter a channel number (1-11) manually, select User defined. Proxy serv. address — Enter the address for the proxy server. Proxy port number — Enter the proxy port number. Packet data The packet data settings affect all access points using a packet data connection. Packet data conn. — If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active packet data connection (for example, to send and receive e-mail) is quicker. If there is no packet data coverage, the device periodically tries to establish a packet data connection. If you select When needed, the device uses a packet data connection only if you start an application or 9243184_N71-1_en_apac.book Page 84 Friday, May 26, 2006 2:31 PM

operator or service provider in a configuration message, or the settings may be stored on your (U)SIM card. You can save these settings to your device, view, or delete them in Configs.. Date and time See "Clock settings", on page 4, and language settings in "General", on page 80. Security Phone and SIM PIN code request — When active, the code is requested each time the device is switched on. Deactivating the personal identification number (PIN) code request may not these codes, contact your service provider. See "Glossary of PIN and lock codes", on page 86. Avoid using access codes similar to the emergency numbers to prevent accidental dialing of the emergency number. Autolock period — You can set an autolock period, a time-out after which the device automatically locks. To turn off the autolock period, select None. To unlock the device, enter the lock code. When the device is locked, calls still may be possible to the official emergency number programmed into your device. Tip! To lock the device manually, press . A list of commands opens. Select Lock phone. Lock if SIM changed — You can set the device to ask for the lock code when an unknown SIM card is inserted into your device. The device maintains a list of SIM cards that are recognized as the owner’s cards. Closed user group — You can specify a group of people to 9243184_N71-1_en_apac.book Page 85 Friday, May 26, 2006 2:31 PM

confirmation messages when you are using a SIM card service (network service). Glossary of PIN and lock codes If you forget any of these codes, contact your service provider. Personal identification number (PIN) code — This code protects your SIM card against unauthorized use. The PIN code (4 to 8 digits) is usually supplied with the SIM card. After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it. UPIN code — This code may be supplied with the USIM card. The USIM card is an enhanced version of the SIM card and is supported by UMTS mobile devices. PIN2 code — This code (4 to 8 digits) is supplied with some SIM cards, and is required to access some functions in your device. Lock code (also known as security code) — This code Personal unblocking key (PUK) code and PUK2 code — These codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact the operator whose SIM card is in your device. UPUK code — This code (8 digits) is required to change a blocked UPIN code. If the code is not supplied with the USIM card, contact the operator whose USIM card is in your device. Certif. management Digital certificates do not guarantee safety; they are used to verify the origin of software. In the certificate management main view, you can see a list of authority certificates that are stored in your device. Press to see a list of personal certificates, if available. Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information. They should also be used if you want to reduce the risk of 9243184_N71-1_en_apac.book Page 86 Friday, May 26, 2006 2:31 PM

risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct. View certificate details You can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked. You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device. T h k ifi d il ll ifi d Expired certificate — The period of validity has ended for the selected certificate. Certificate not valid yet — The period of validity has not yet begun for the selected certificate. Certificate corrupted — The certificate cannot be used. Contact the certificate issuer. Change the trust settings Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner. Scroll to an authority certificate, and select Options > Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. For example: Symbian installation: Yes — The certificate is able to certify the origin of a new Symbian operating system application. Internet > Yes — The certificate is able to certify servers. 9243184_N71-1_en_apac.book Page 87 Friday, May 26, 2006 2:31 PM

Some copyright-protected music files may include a transaction identifier. Select whether you allow the identifier to be sent with the music file if you send or forward the file. The provider of the music file can use the identifier to track the distribution of the files. Call divert Call divert allows you to divert your incoming calls to your voice mailbox or another phone number. For details, contact your service provider. Select which calls you want to divert and the desired divert option. To divert voice calls when your number is busy or when you reject incoming calls, select Voice calls > If busy. Set the option on (Activate) or off (Cancel), or check whether the option is activated (Check status). Several divert options can be active at the same time. Wh ll ll di d i h i h Call barring Call barring (network service) allows you to restrict the calls that you make or receive with the device. To change the settings, you need the barring password from your service provider. Select the desired barring option, and set it on (Activate) or off (Cancel), or check whether the option is active (Check status). Call barring affects all calls, including data calls. Call barring and call diverting cannot be active at the same time. When calls are barred, calls still may be possible to the official emergency number programmed into your device. Network 9243184_N71-1_en_apac.book Page 88 Friday, May 26, 2006 2:31 PM

operator) — Select which network to use. If you select Dual mode, the device uses the GSM or UMTS network automatically, according to the network parameters and the roaming agreements between the network operators. Contact your network operator for more details. Operator selection — Select Automatic to set the device to search for and select one of the available networks, or Manual to manually select the network from a list of networks. If the connection to the manually selected network is lost, the device sounds an error tone and asks you to reselect a network. The selected network must have a roaming agreement with your home network, that is, the operator whose SIM card is in your device. Glossary: A roaming agreement is an agreement between two or more network service providers to enable the users of one service provider to use the services of other service providers. Cell info display — Select On to set the device to indicate h it i d i ll l t k b d i ll l Enhanc. sett. In the standby mode, indicates a compatible headset is connected, and that the headset is unavailable, or a Bluetooth connection to a headset is lost. indicates a compatible loopset is connected, that a Text phone is connected, and that a car kit is connected. Select Headset, Loopset, Text phone, Bluetooth handsfree, or Car kit and from the following: Default profile — Set the profile that you want activated each time you connect a certain enhancement to your device. See "Profiles — set tones", on page 70. Automatic answer — Set if you want the device to answer an incoming call automatically after 5 seconds. If the Ringing type is set to Beep once or Silent, automatic answer is disabled. Automatic answer is not available for Text phone. If you are using a Text phone, you must activate it on your 9243184_N71-1_en_apac.book Page 89 Friday, May 26, 2006 2:31 PM

more information about the enhanced voice commands supported by your device, see "Voice dialing", on page 42. To activate enhanced voice commands for starting applications and profiles, you must open the Voice cm. application and its Profiles folder. Press , and select Tools > Voice cm. > Profiles; the device creates voice tags for the applications and profiles. To use enhanced voice commands, press and hold in the standby mode, and say a voice command. The voice command is the name of the application or profile displayed in the list. Tip! Alternatively, to define the side key to use voice commands, see "General", on page 80. To add more applications to the list, select Options > New application. To add a second voice command that can be used to start the application, select Options > Change device language, select Synthesiser > Off. To reset voice recognition learning (for example, when the main user of the device has changed), select Reset voice adapts.. Application manager Press , and select Tools > App. mgr.. You can install two types of applications and software to your device: • J2ME™ applications based on Java technology with the extension .jad or .jar ( ). • Other applications and software suitable for the Symbian operating system ( ). The installation files have the .sis extension. Only install software specifically designed for your Nokia N71. Software providers will often refer to the official model number of this product: N71. Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or i l i di il 9243184_N71-1_en_apac.book Page 90 Friday, May 26, 2006 2:31 PM

indicates a .sis application, a Java application, that the application is not fully installed, and that the application is installed on the memory card. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. Before installation, note the following: • To view the application type, version number, and the supplier or manufacturer of the application, select Options > View details. • To display the security certificate details of the application, select Options > View certificate. See "Certif. management", on page 86. • If you install a file that contains an update or repair to an existing application, you can only restore the original application if you have the original installation file or a full back-up copy of the removed software package. To restore the original application, remove the password to access the server. You obtain these from the supplier or manufacturer of the application. 1 To locate an installation file, press , and select Tools > App. mgr.. Alternatively, search the device memory or a memory card (if inserted) in File mgr., or open a message in Messag. > Inbox that contains an installation file. 2 In App. mgr., select Options > Install. In other applications, scroll to the installation file, and press to start the installation. During installation, the device shows information about the progress of the installation. If you are installing an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application. To start an installed application, locate it in the menu, and press . To start a network connection and to view extra information about the application select Options > Go to 9243184_N71-1_en_apac.book Page 91 Friday, May 26, 2006 2:31 PM