Oki 8100e Network User's Manual

Configuration - 85 6. Follow the on-screen instructions. 7. Select [Install Oki LPR]. 8. Follow the on-screen instructions. 9. Click [Next] when the [Welcome] screen is displayed. 10. Verify [Destination Folder] and [Spool Folder] and click [Next]. 11. Check [Register in Startup] if you want automatic startup as Windows boots up. Check [Launch as minimized] if you want to startup in the Icon state and click [Next]. 12. Verify the program folder name and click [Next]. The installation starts. 13. When the installation ends, the [Setup complete] screen is disp ...

Configuration - 63 TCPIP-8 [OKI Device Setup] -[TCP/IP]- [DNS Server...] -[Secondary Server] [Network Configuration]-[T CP/IP]-[Fixed IP Address Settings]-[DNS Server Address (Sec.)] [Setup TCP/ IP]-[DNS server(Sec.)] 0.0.0.0— 255.255.255.25 5 (0.0.0.0) Set IP address for secondary DNS server TCPIP-9 [OKI Device Setup]-[Gen eral]-[Chan ge root password] [Setup TCP/ IP]- [root password] Any alphanumeric characters up to seven characters. (Default is null) Set the root password of OkiLAN SNMP-1 [OKI Device Setup]-[SN MP]-[Authe ntic Community] [Network Confi ...

Configuration - 44 1—5 By selecting each button, the following dialogue box is displayed: bmp35.bmp In the dialogue box, the following items can be configured: Available condition and Selected condition Select each E-mail alert condition. Select a condition from Available Condition list and click >>. The selected condition is copied to Selected condition list. Available conditions are: Off line, Consumable Message, Toner Low/Out, Paper Low/Out, Paper Jam, Cover Open, Stacker Error, Mass Storage Error, Recoverable Error, Service Call Request and Finisher ...

Configuration - 72 Trap-6 [OKI Device Setup]-[SN MP]-[Printer Trap Setup . . .]-[TCP#1— 5]-[Detail . . .]-[Paper Jam] [Network Configuration]-[ SNMP Traps]- [Trap Assignments]-[P aper Jam] [Setup printer trap]-[Setup TCP#1—5 trap] – [Paper Jam trap] ENABLE/ DISABLE Set sending a trap enabled or disabled when a paper jam occurs Trap-7 [OKI Device Setup]-[SN MP]-[Printer Trap Setup . . .]-[TCP#1— 5]-[Detail . . .]-[Cover Open] [Network Configuration]-[ SNMP Traps]-[Trap Assignments]-[C over Open] [Setup printer trap]-[Setup TCP#1—5 trap] – [Cover O ...

Configuration - 34 Netware Tab This is where you can configure NetWare related items. bmp24.bmp Location Comments Use NetWare Protocol Set NetWare protocol as enabled/disabled. Print Server Name Set Print Server name. Frame Type Set primary NetWare frame type. Operation Mode Set NetWare mode. Check box besides Bindery Setup Check if you want to use the Bindery mode and Bindery Setup button becomes available. If it is unchecked, the button is greyed out. ...

Configuration - 76 SMTP-14 [OKI Device Setup]-[SM TP]-[1—5]- [Selected condition] [Network Configuration]-[E mail Settings]-[Email Alert Assignments]-[C over Open] [Setup SMTP (E-Mail)]-[Eve nt to address 1—5] – [Cover Open] ENABLE/ DISABLE An E-mail is sent when the cover is opened if this is enabled SMTP-15 [OKI Device Setup]-[SM TP]-[1—5]- [Selected condition] [Network Configuration]-[E mail Settings]-[Email Alert Assignments]-[S tacker Error] [Setup SMTP (E-Mail)]-[Eve nt to address 1—5] – [Stacker Error] ENABLE/ DISABLE An E-mail is sent whe ...

Microsoft Windows - 106 Windows XP Although you can install the NetBEUI protocol into Windows XP, it is not supported. You should be able to use NetBEUI on LAN connections although you will not be able to use this on Remote Access Service Connections. 1. In the [Start] menu, select [Settings] then [Control Panel]. 2. Double-click [Network Connections]. 3. Right-click the adapter you wish to add NetBEUI to and then click [Properties]. 4. On the [General] tab, select [Install]. 5. Select [Protocol] and then [Add]. 6. Select [Have Disk] and insert your Windows ...