Olympus C-150 Reference Manual

DIGITAL CAMERA REFERENCE MANUAL D-390 C-150 DIGITAL CAMERA - PC CONNECTION OPERATION MANUAL Explanation of digital camera functions and operating instructions. Explanation of how to download images between your digital camera and PC.

to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. ● In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. D-390 C-150

For customers in Europe “CE” mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. “CE” mark cameras are intended for sales in Europe. Trademarks • IBM is a registered trademark of International Business Machines Corporation. • Microsoft and Windows are registered trademarks of Microsoft Corporation. • Macintosh is a trademark of Apple Computer Inc. • All other company and product names are registered trademarks and/or trademarks of their respective owners. • The standards for camera file systems referred to in this manual are the “Design Rule for Camera File System/DCF” standards stipulated by the Japan Electronics and Information Technology Industries Association (JEITA). For customers in USA Declaration of Conformity Model Number : D-390/C-150 Trade Name : OLYMPUS Responsible Party : Olympus America Inc. Address : 2 Corporate Center Drive, Melville, New York 11747-3157 U.S.A. Telephone Number : 631-844-5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. For customers in Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

functions 3 Contents P. 4 Specifications P. 111 Index P. 113 For easily learning the fundamentals of taking pictures For fine-tuning the settings to get that particular shot For playing back and arranging pictures Settings that make the camera easier to operate Printing pictures Troubleshooting and other information 1 2 3 4 5 6 7 8 Getting started P. 7 Using the menus P. 29 Shooting basics P. 37 Advanced shooting P. 52 Playback P. 67 Useful functions P. 84 Print settings P. 93 Miscellaneous P. 99

7 Names of parts ..........................................................................................7 Monitor indications ....................................................................................9 How to use this manual ..........................................................................12 Attaching the strap ..................................................................................13 Loading batteries ....................................................................................14 Selecting batteries or the optional AC adapter ..................................16 Inserting/Removing a card ......................................................................18 Card basics ......................................................................................18 Power on/off ............................................................................................21 If the card is not recognized (card check) ..........................................23 Selecting a language ....................................................................24 Setting the date and time ..................................................................26 Holding the camera ................................................................................ 28 2 Using the menus 29 Menu items ..............................................................................................29 How to use the mode menu .................................................................... 30 Shortcut menus ........................................................................................32 Mode menus ............................................................................................34 3 Shooting basics 37 Shooting modes ......................................................................................37 Selecting shooting modes ..................................................................38 Taking still pictures PHOTO ..............................................................40 Taking still pictures using the viewfinder ............................................40 Taking still pictures using the monitor ................................................41 Comparison of the viewfinder & monitor ............................................43 If correct focus cannot be obtained ........................................................44 How to lock the focus ........................................................................44 Subjects that are difficult to focus on..................................................45

Using the flash ....................................................................................49 4 Advanced shooting 52 Macro mode shooting ........................................................................52 Self-timer shooting ............................................................................53 Selecting the metering area (Spot metering) ....................................54 PANORAMA - Panorama shooting ..........................................................55 2 IN 1 - Taking two-in-one pictures 2 IN 1..............................................57 Changing the record mode ................................................................59 Varying the image brightness (Exposure compensation) ..................63 Adjusting the white balance WB ............................................................65 5 Playback 67 Viewing still pictures ........................................................................67 QUICK VIEW......................................................................................68 Close-up playback ........................................................................69 Index display ................................................................................70 Slideshow ....................................................................................71 Picture Rotation ............................................................................72 Playback on a TV .................................................................................. 73 MOVIE PLAY - Viewing movies ........................................................74 Protecting pictures ..........................................................................76 Erasing pictures ................................................................................77 Single-frame erase ............................................................................77 All-frame erase ............................................................................78 Editing still pictures ..................................................................................79 Creating black and white pictures ......................................................79 Creating sepia-toned pictures ............................................................80 Resizing pictures ........................................................................80 INDEX - Creating an index ......................................................................82

84 MODE RESET - Restoring the factory default settings............................84 ALL RESET - Saving the settings ............................................................84 CARD SETUP - Formatting cards ......................................................85 Displaying shooting information INFO ..................................................87 REC VIEW - Viewing a picture immediately after shooting......................88 Adjusting the monitor brightness ......................................................88 Turning the beep sound off ..............................................................89 FILE NAME ..............................................................................................89 PIXEL MAPPING......................................................................................91 VIDEO OUT - Video output selection ......................................................92 7 Print settings 93 How to print pictures ..........................................................................93 All-frame reservation ..........................................................................95 Single-frame reservation ....................................................................96 Resetting print reservation data ........................................................98 8 Miscellaneous 99 Error codes ..............................................................................................99 Troubleshooting......................................................................................100 Menu list ................................................................................................105 Factory default settings ..........................................................................108 List of functions by shooting mode ........................................................109 Camera maintenance ............................................................................110 Specifications..........................................................................................111 Index ......................................................................................................113

1 Getting started Shutter button ~P. 40 Flash ~P. 49 Connector cover ~P. 73 DC-IN jack ~P. 16 Self-timer lamp ~P. 53 Lens barrier Turns the camera on and off in the shooting mode. Lens VIDEO OUT jack ~P. 73

1 Getting started Arrow pad (ÑñÉí) ~P. 12 Zoom in ~P. 48 Close-up playback ~P. 69 Zoom out ~P. 48 Index display ~P. 70 Flash ~P. 49 Monitor ~P. 41 Battery compartment cover ~P. 14 OK/Menu button( ) ~P. 29 Monitor button (QUICK VIEW ) ~P. 68 Playback button ( ) ~ P. 67 Shooting: Turns on/off the monitor Playback: Turns on/off the camera • Press this button after connecting the camera to the PC with the USB cable. Strap eyelet ~P. 13 Tripod socket Viewfinder ~P. 40 AF target mark ~P. 40 Green lamp ~P. 40 Orange lamp ~P. 40, 49 Arrow pad Viewfinder Simply press a button (Ñ/ñ/É/í) to directly select zoom in/out, flash or self-timer. Buttons are also used to navigate the various menu items. Self-timer ~P. 53 Card cover ~P. 19 USB connector

P. 63 compensation 4 Spot metering mode P. 54 5 White balance , , , P. 65 6 AF target mark [ ] P. 41 7 Macro P. 52 8 Flash mode , , P. 49 9 Self-timer P. 53 10 Record mode SHQ, HQ, SQ1, SQ2 P. 59 11 Resolution 1600 x 1200, 1024 x 768, P. 60 (number of pixels) 640 x 480, etc. 12 Number of storable 11 P. 41 still pictures Seconds remaining 11'' P. 46 for movies 4 7 8 9 10 11 12 5 6 1 2 3 P HQ 1600 x 1200 2.0 +

monitor. Screens when the information display is set to ON are shown below. ~ “Displaying shooting information” (P. 87) • The indications that appear on a movie picture that has been displayed from the index display are different from those that appear when the movie picture is displayed using the movie playback function. Note Still picture Movie Items Indications Ref. page 1 Battery check , P. 11 2 Print reservation x10 P. 95 Number of prints P. 96 3 Protect P. 76 4 Record mode SHQ, HQ, SQ1, SQ2 P. 59 5 Number of pixels 1600 x 1200, 1024 x 768, P. 60 640 x 480, etc. 6 Exposure –2.0 – +2.0 P. 63 compensation 7 White balance WB AUTO, , , , P. 65 8 Date and time '03.09.12 12:30 P. 26 9 File number, Frame 100-0020, 12, 0"/15" P. 74 number, Playing time P. 87 /Total recording time 10 Movie mode P. 74 HQ HQ SIZE: 1600x1200 SIZE: 1600x1200 +2.0 2.0 ’03.09.12 12:30 03.09.12 12:30 FILE: 100 FILE: 100–0020 0020 x10 1 2 3 4 5 6 7 8 9 HQ HQ SIZE: 320x240 SIZE: 320x240 WB AUTO WB AUTO ’03.09.12 12:30 03.09.12 12:30 0"/15" 0"/15" 9 10

monitor changes as follows when the camera is turned on or while the camera is in use. Lights (Green) (The indicator turns off after several seconds.) Blinks (Red) Pictures can be taken.* Remaining power level: low. Prepare new batteries. Green and orange lamps on right of viewfinder blink. Remaining power level: exhausted. Put in new batteries. No indication * The amount of energy the camera uses varies greatly on how the camera is operated. Battery power may finish without displaying any warning, causing the camera to turn off.

You can take advantage of panorama shooting with the Olympus xD-Picture Card. Panorama shooting lets you connect pictures with overlapping edges into a single panoramic picture, using the CAMEDIA Master software contained on the CD-ROM provided. Connects pictures from left to right. 1 In the shooting mode top menu, select MODE MENU T CAMERA T PANORAMA, and press í. ~ “How to use the mode menu” (P. 30) • The monitor turns on. • The PANORAMA mode is set. 2 On the monitor, use the arrow pad to choose the direction you want the pictures connected. í : Connects the pictures from left to right. É : Connects the pictures from right to left. Ñ : Connects the pictures from bottom to top. ñ : Connects the pictures from top to bottom. Arrow pad (ÑñÉí) How to use this manual Follow the arrows to perform menu operations. For details of operating procedures, see “How to use the mode menu” (P. 30). The buttons for various functions and their locations are clearly illustrated. Ñ, ñ, É and í indicate which button to press on the arrow pad. This sample page is only for your reference. It may differ from the actual instructions in this manual. ●Indications used in this manual Important information on factors which may lead to a malfunction or operational problems. Also warns of operations that should be absolutely avoided. Useful information and hints that will help you get the most out of your camera. Reference pages describing details or associated information. Note ~

1 Thread the short end of the strap through the strap eyelet. • The strap can only enter from the lens side. 2 Thread the long end of the strap through the loop that has already gone through the eyelet. 3 Pull the strap tight, making sure that it is securely fastened and does not come loose. Strap eyelet • Be careful with the strap when you carry the camera, as it can easily catch on stray objects, causing injury or damage. • Attach the strap correctly following the procedure so that the camera does not fall off. If the strap is attached incorrectly and the camera falls off, Olympus is not responsible for any damages. Note

alkaline batteries. • CR-V3 lithium battery packs cannot be re-charged. • Do not peel the label on a CR-V3 lithium battery pack. • Manganese (zinc-carbon) batteries cannot be used. Important 1 Make sure that: 2 Slide the battery compartment cover in the direction of a (the direction indicated by the mark on the cover), and lift it up in the direction of b. 3 Insert batteries in the direction shown in the illustration. When using AA (R6) batteries There is a mark on the bottom of the camera showing the correct way to insert batteries. When using a CR-V3 lithium battery pack The lens barrier is closed. The monitor is off. The lamps on the right of the viewfinder are off. a b

the camera is left for about one hour with the battery removed. Note 4 Close the battery compartment cover so that it pushes batteries down inside. While pressing the mark, slide the cover in the direction of c. • If the battery compartment cover seems hard to close, do not force it. With the battery compartment cover shut, press the mark firmly and push in the direction shown in the illustration. c

In addition to the batteries provided, this camera can also use the following types of batteries or AC adapter. Choose the power source best suited to the situation. ●CR-V3 lithium battery packs (Not rechargeable) Because CR-V3 lithium battery packs have long lives, they are convenient when traveling. Do not peel off their labels. ●NiMH batteries (Rechargeable) Olympus NiMH batteries are rechargeable and economical. If they are often charged without first using all their power, the amount of time they can be used will become gradually shorter. ●AA (R6) alkaline batteries When you need batteries in a hurry, you can use AA (R6) alkaline batteries, which are easy to get anywhere. However, the number of pictures you can store may vary greatly, depending on the battery manufacturer, shooting conditions, etc. To save power, turn off the monitor whenever possible. ●AC adapter Be sure to use the specified AC adapter. An AC adapter is useful for time- consuming tasks such as image downloads. Use an AC adapter designed to operate on the AC voltage in the area the camera is being used. Consult your nearest Olympus dealer or service center for details. AC wall outlet Connection cord plug Open the connector cover and plug in the AC adapter. DC-IN jack AC adapter

• If the battery power runs out while the camera is connected to a PC, the image data may be lost or damaged. You are recommended to use the AC adapter when transferring images to a PC. Do not connect or disconnect the AC adapter while the camera is communicating with the PC. • Do not remove or load batteries or connect or disconnect the AC adapter while the camera is turned on. Doing so could affect the camera’s internal settings or functions. • Power is consumed continuously during the conditions described below. This could make batteries run out of power quickly. • Turning on the monitor. • Repeated auto-focus by depressing the shutter button halfway. • When the camera is connected to a PC. • When using an AC adapter, power is supplied to the camera by the AC adapter even if batteries are loaded in the camera. The AC adapter does not charge batteries in the camera. • Carefully read the separate-volume Safety Precaution before use. Note

“Card” in this manual refers to the xD-Picture Card. The camera uses the card to record pictures. Card basics The card corresponds to normal camera film for recording the pictures you have taken. Pictures recorded and stored on the card can easily be erased, overwritten, and/or edited on a PC. 1 Index area You can write down the card’s contents. 2 Contact area Comes into contact with the camera’s signal read contacts. Compatible cards • xD-Picture Card (16 to 256 MB) • This camera may not recognize a non-Olympus card or a card that was formatted on another device (such as a PC, etc.). Before use, be sure to format the card on this camera. ~ “CARD SETUP - Formatting cards” (P. 85) Note 1 2

1 Make sure that: 2 Open the card cover. 3 Face the card the correct way and insert it into the card slot as shown. • Insert the card while keeping it straight. • When the card is inserted fully, you will feel it lock into place. • Inserting the card the wrong way or at an angle could damage the contact area or cause the card to jam. • If the card is not inserted all the way, data may not be written to the card. 4 Close the card cover. 19 1 Getting started Inserting/Removing a card The lens barrier is closed. The monitor is off. The lamps on the right of the viewfinder are off. Notch Index area side When the card is inserted properly.

●Removing the card 1 Make sure that: 2 Open the card cover. 3 Push the card all the way in to unlock it, then let it return slowly. • The card is ejected a short way and then stops. 4 Hold the card straight and pull it out. 5 Close the card cover. Releasing your finger quickly after pushing the card all the way in may cause it to eject forcefully out of the slot. • Do not push in the card with hard or pointed objects, such as a pen. • Never open the card cover, or remove the card or the battery while the camera is turned on. Doing so could destroy the data on the card. Once destroyed, data cannot be restored. Note Note The lens barrier is closed. The monitor is off. The lamps on the right of the viewfinder are off.

Power on: Open the lens barrier. The camera turns on in the shooting mode. Power off: Close the lens barrier. The camera turns off. TIPS • To save battery power, the camera automatically enters the sleep mode (stops being active) after about 3 minutes of non-operation. The camera activates again as soon as you lightly press the shutter button. Whenever possible, turn the camera off when you do not intend to take any pictures for a while. ● Power on ● Power off

Power on: Press with the lens barrier closed. The camera turns on in the playback mode. The monitor turns on and the last picture taken is displayed. Power off: Press . The monitor and the camera turn off. TIPS • When the camera turns on, the monitor may light up for an instant and a picture appear after a short time. This is not a malfunction. • Never open the card cover, remove the card or the battery, or connect or disconnect the AC adapter while the camera is turned on. Doing so could destroy all data on the card. Destroyed data cannot be restored. When changing the card, be sure to turn the camera off before opening the card cover. Note

When the power is turned on, the camera checks the card automatically. If there is no card in the camera or a card that is not supported by this camera is inserted, the following screen is displayed. • All data stored on the card is erased when the card is formatted. Note Monitor indication Corrective action There is no card in the camera or the card is not inserted properly. TTurn off the camera, then insert a card. If a card is already inserted, remove it and insert it again correctly. The card cannot record, play back or erase pictures. TReplace the card with a new one. Press Ññ to select POWER OFF, then press . TFormat the card. Press Ññ to select FORMAT, then press to display the confirmation screen. Select YES and press . Formatting starts. If the card was successfully formatted, the camera is ready to take pictures. NO CARD SELECT SELECT GO GO CARD SETUP CARD SETUP POWER OFF FORMAT FORMAT

You can select a language for on-screen display. This reference manual shows the English on-screen display in the illustrations and explanations. Available languages vary depending on the area where you purchased this camera. 1 Open the lens barrier fully. 2 Press . • The top menu is displayed. 3 Press í on the arrow pad to select MODE MENU. 4 Press Ññ to select the SETUP tab, then press í. 5 Press Ññ to select , then press í. SETUP tab Top menu MODE RESET MODE MENU SETUP CAM CARD PIC ALL RESET REC VIEW REC VIEW FILE NAME ON ON ON RESET ENGLISH ENGLISH SETUP CAM CARD PIC ALL RESET REC VIEW REC VIEW FILE NAME ON ON ON RESET ENGLISH Arrow pad (ÑñÉí)

6 Press Ññ to select a language, then press . 7 Press again to exit the menu. 8 Close the lens barrier to turn the camera off. TIPS • The language can also be set from the playback mode. SELECT GO ENGLISH FRANCAIS FRANCAIS DEUTSCH DEUTSCH ESPAÑOL OL

1 Open the lens barrier fully. 2 Press . • The top menu is displayed. 3 Press í on the arrow pad to select MODE MENU. 4 Press Ññ to select the SETUP tab, then press í. 5 Press Ññ to select , then press í. • The green frame moves to the selected item. Top menu MODE RESET MODE MENU SETUP tab SETUP CAM CARD PIC ALL RESET REC VIEW REC VIEW FILE NAME ON ON ON RESET ENGLISH ENGLISH SETUP CAM CARD PIC VIDEO OUT NTSC ’03.01.01 03.01.01 00:00 00:00 PIXEL MAPPING PIXEL MAPPING Arrow pad (ÑñÉí)

6 Press Ññ to select one of the following date formats:Y-M-D (Year/Month/Day), M- D-Y (Month/Day/Year), D-M-Y (Day/ Month/ Year).Then press í. • Move to the year setting. • The following steps show the procedure used when the date and time settings are set to Y-M-D. 7 Press Ññ to set the year, then press í to move to the month setting. • To move back to the previous setting, press É. • The first two digits of the year are fixed. 8 Repeat this procedure until the date and time are completely set. • The camera only displays the time in the 24-hour time system. (“2 pm” would be “14:00”.) 9 Press . • For a more accurate setting, press when the time hits 00 seconds. The clock starts when you press the button. 10 Close the lens barrier to turn the camera off. TIPS • The date and time can also be set from the playback mode. • The current settings are retained even when the power is turned off. • The date and time settings will be canceled if the camera is left without the battery for approximately 1 hour. The settings will be canceled more quickly if the battery was only loaded in the camera for a short time before being removed. Before taking important pictures, check that the date and time settings are correct. Note SELECT SELECT SET SET GO GO 2003 . 01 . 01 SELECT SELECT SET SET GO GO 2003 . 01 . 01

When taking pictures, hold the camera firmly with both hands while keeping your elbows at your sides to prevent the camera from moving. When using a vertical grip, hold the camera so that the flash is higher than the lens. Taking pictures using the monitor Taking pictures using the viewfinder • Clear pictures cannot be obtained if the camera moves as the shutter button is pressed. Hold the camera correctly, and press the shutter button gently. Note Horizontal grip Incorrect grip Vertical grip Keep your fingers and the strap away from the lens and flash. Be sure to hold the camera with both hands to stop it from moving. Keeping your elbows at your sides is very effective for this.

Menu items 2 Using the menus When you turn on the camera and press , the top menu is displayed on the monitor. The functions of this camera are set from the menus. This chapter explains the types of menu items that this camera has and how they work, using shooting mode screens. Press . The top menu is displayed. Select a menu using the arrow pad. • Takes you directly to the setting screen. • Display operational buttons at the bottom of the screen. • Categorizes the settings into tabs. • Displays the tabs of each menu. Select the desired tab on the left of the screen by pressing Ññ. Shortcut Menus MODE MENU Tab MODE RESET MODE MENU CANCEL CANCEL SELECT SELECT GO GO SHQ SHQ 1600 x 1200 HQ 1600 x 1200 SQ1 SQ1 1024 x 768 SQ2 SQ2 640 x 480 SET CAMERA CARD PIC SCENE SELECT SCENE SELECT PANORAMA PROGRAM PROGRAM AUTO AUTO OFF OFF OFF OFF 0.0 0.0

How to use the mode menu 1 Press to display the top menu. Press í. 2 Press Ññ to select a tab, then press í. Top menu CAMERA tab SETUP tab CARD tab Press É to return to the tab selection screen. É í Ñ ñ Arrow pad (ÑñÉí) PICTURE tab MODE RESET MODE MENU å SET CAMERA CARD PIC SCENE SELECT PANORAMA ANORAMA PROGRAM PROGRAM AUTO AUTO OFF OFF OFF OFF 0.0 0.0 í å ß SET CAM CARD PICTURE WB WB AUTO AUTO ¥ ˙ SET CAM CARD PIC CARD SETUP CARD SETUP Ñ ñ ¥ ˙ SETUP CAM CARD PIC ALL RESET ALL RESET REC VIEW REC VIEW FILE NAME FILE NAME ON ON ON ON ON ON RESET RESET ENGLISH Ñ ñ ¥ ˙ ~ Continued on next page

How to use the mode menu 3 Press Ññ to select an item, then press í. 4 Press Ññ to select a setting. Press to complete setting. Press again to exit the menu and return to shooting. The green frame moves to the selected item. To return to select an item, press É or . • Items available for selection depends on the camera settings. • You can take pictures while a menu is displayed in the shooting mode. • If you want to save the settings after the camera is turned off, set ALL RESET to OFF. ~ “ALL RESET - Saving the settings” (P. 84) Note É or Ñ ñ SET CAMERA CARD PIC SCENE SELECT PANORAMA ANORAMA PROGRAM PROGRAM AUTO AUTO OFF OFF OFF OFF 0.0 0.0 SET CAMERA CARD PIC SCENE SELECT PANORAMA ANORAMA PROGRAM PROGRAM AUTO AUTO OFF OFF OFF OFF 0.0 0.0 ¥ ˙ É í å ß Ñ ñ SET CAMERA CARD PIC SCENE SELECT PANORAMA ANORAMA OFF ON ON SET CAMERA CARD PIC SCENE SELECT PANORAMA ANORAMA OFF OFF ON ¥ ˙

Shortcut menus ●Shooting mode Shortcut menus are frequently-used menus that can be accessed from the top menu. Records movies. This icon appears when the menu is P. 46 displayed in the still picture shooting mode. Sets the image quality and resolution. P. 59 Still picture : SHQ, HQ, SQ1, SQ2 Movie : HQ, SQ A simple press of the shutter button gives you optimal exposure P. 37 and focus for general photography. This icon appears when the menu is displayed in the movie recording mode. Still picture MODE RESET Restores functions (exposure compensation, white balance, P. 84 etc.) to the factory default settings. MODE RESET is identical to the ALL RESET function included in the MODE MENU. MODE RESET MODE MENU Movie MODE MENU MODE RESET PHOTO PHOTO

Shortcut menus ●Playback mode MOVIE PLAY INFO Runs through all saved pictures one after another as a P. 71 slide show. This icon appears when the menu is displayed while a still picture is played back. Plays back movies. This icon appears when the menu is P. 74 displayed while a movie frame is played back. Displays all the shooting information on the monitor. P. 87 ERASE Erases the selected still picture or movie. P. 77 Still picture ERASE INFO MODE MENU Movie ERASE INFO MODE MENU MOVIE PLAY

Mode menus CAMERA tab The MODE MENU is divided into tabs. Press Ññ to select a tab and display the associated menu items. ●Shooting mode CAMERA tab SCENE SELECT Selects the shooting mode from P. 38 (program auto), (portrait), (landscape), (night scene) or (self portrait). Allows you to shoot as close as P. 52 20 cm (0.7 ft.) to your subject. Meters light within the AF target mark P. 54 to determine exposure. Adjusts the brightness of the picture. P. 63 PANORAMA Allows panorama pictures to be taken P. 55 with Olympus CAMEDIA-brand cards. 2 IN 1 Combines two still pictures taken in P. 57 succession and stores them as a single picture. CARD tab CARD SETUP Formats a card. P. 85 CARD tab SETUP tab PICTURE tab WB Sets the appropriate white balance P. 65 according to the light source. PICTURE tab SET CAMERA CARD PIC SCENE SELECT SCENE SELECT PANORAMA PROGRAM PROGRAM AUTO AUTO OFF OFF OFF OFF 0.0 0.0 SET CAMERA CARD PIC OFF OFF OFF OFF 0.0 0.0 Still picture Movie

Mode menus ●Playback mode PLAY tab Protects pictures from accidental erasure. P. 76 Rotates pictures 90 degrees clockwise or P. 72 counterclockwise. Stores print reservation information on the P. 93 card. SETUP tab ALL RESET Selects whether to keep the current P. 84 camera settings when you turn off the power. Selects a language for on-screen display. P. 24 Turns the beep sound (used for warnings, P. 89 etc.) on and off. REC VIEW Selects whether to display pictures on the P. 88 monitor while saving them to a card. FILE NAME Chooses how to name files and folders P. 89 of pictures. PIXEL MAPPING Checks the CCD and image processing P. 91 functions for errors. Adjusts the brightness of the monitor. P. 88 Sets the date and time. P. 26 VIDEO OUT Selects NTSC or PAL according to your P. 92 TV’s video signal type. TV video signal types differ depending on the region. PLAY tab CARD tab SETUP tab EDIT tab SET PLAY CARD EDIT OFF OFF 0 SET PLAY CARD EDIT OFF OFF Still picture Movie

Mode menus CARD tab CARD SETUP Formats the card, erasing all image data P. 23 stored on it. P. 85 SETUP tab ALL RESET Selects whether to keep the current P. 84 camera settings when you turn off the power. Selects a language for on-screen display. P. 24 Turns the beep sound (used for warnings, P. 89 etc.) on and off. Adjusts the brightness of the monitor. P. 88 Sets the date and time. P. 26 VIDEO OUT Selects NTSC or PAL according to your P. 92 TV’s video signal type. TV video signal types differ depending on the region. Selects the number of frames in the index P. 70 display. EDIT tab BLACK&WHITE Creates a black and white picture and P. 79 saves it as a new picture. SEPIA Creates a sepia-toned picture and saves P. 80 it as a new picture. Makes the file size smaller and saves it P. 80 as a new picture. INDEX Creates an index picture of a movie in 9 P. 82 frames.

This camera shoots still pictures and movies. In the still picture shooting mode, select a shooting mode from PHOTO ( ), depending on shooting conditions and the effect you want. The factory default setting is P (PROGRAM AUTO). You are able to shoot normally even if you do not select a shooting mode. � PHOTO Still picture shooting Lets you take still pictures. You can select a more specific shooting mode depending on the scenes you want to shoot. � Movie recording Lets you record movies. You cannot record movies with sound. ~ “Recording movies” (P. 46) �Still picture shooting modes P PROGRAM AUTO (factory default setting) Used for regular photography. The camera automatically makes settings for natural color balance. Other functions, such as the flash mode, can be adjusted manually. Portrait shooting Suitable for taking a portrait-style shot of a person. The camera automatically sets the optimal shooting conditions. Landscape shooting Suitable for taking photos of landscapes and other outdoor scenes. The camera automatically sets the optimal shooting conditions. Night-Scene shooting Suitable for taking photos of landscapes and people in the evening or at night. The camera sets a slower shutter speed than is used in normal shooting. If you take a picture of a street at night in any other mode, the lack of brightness will result in a dark picture with the background underexposed and without details. In this mode, the true appearance of the street is captured. The camera automatically sets the optimal shooting conditions. We recommend that you set the flash mode to AUTO. Normal shooting and flash on Night-Scene shooting and flash on

Enables you to take a picture of yourself while holding the camera. Point the lens towards yourself and the focus will be locked on you. The camera automatically sets the optimal shooting conditions. Selecting shooting modes 1 Open the lens barrier fully. 2 Press . • The top menu is displayed. 3 In the top menu, press í to select MODE MENU. • Movie recording: Press Ñ to select . MODE RESET MODE MENU Arrow pad (ÑñÉí)

the functions for each mode. • Digital zoom and panorama shooting are not available in Self- Portrait mode. Note 4 Press Ññ to select the CAMERA tab, then press í. 5 Press Ññ to select SCENE SELECT, then press í. 6 Press Ññ to select a mode from , , , or , then press . • Press again to exit the menu. SET CAMERA CARD PIC SCENE SELECT PANORAMA PROGRAM AUTO

1 Open the lens barrier fully. 2 Compose your picture while looking at the image in the viewfinder. 3 Press the shutter button gently (halfway) to adjust the focus. • When the focus and exposure are locked, the green lamp lights steadily. (focus lock) • If the orange lamp lights, the flash fires automatically. 4 Press the shutter button all the way (fully). • The camera takes the picture, and a beep sounds. • When the green lamp stops blinking, you can take the next picture. • When the orange lamp starts blinking, the pictures are stored on the card. Taking still pictures You can take still pictures using either the monitor or the viewfinder. Both methods are easy as all you have to do is to press the shutter button. Orange lamp Green lamp AF target mark Shutter button PHOTO

TIPS It is difficult to focus on the subject. T~ “If correct focus cannot be obtained” (P. 44) The green lamp blinks. TYou are too close to the subject. Take the picture at least 50 cm/1.6 ft. away from the subject. When the distance from the camera to the subject is less than 50 cm/1.6 ft, select the macro mode. ~ “Macro mode shooting” (P. 52) TDepending on the subject, the focus may not be locked. ~ “Subjects that are difficult to focus on” (P. 45) The orange lamp blinks. TIf the shutter button is being pressed halfway, the flash is charging. Wait until the light turns off. To check the picture you have just taken immediately. TSet REC VIEW to ON. ~ “REC VIEW - Viewing a picture immediately after shooting” (P. 88) Taking still pictures using the monitor 1 Open the lens barrier fully. • Slide the lens barrier fully open until it clicks. 2 Press to turn on the monitor. 3 Decide the composition of the picture while looking at the image on the monitor. Shutter button Shooting mode (P. 37) AF target mark No. of storable still pictures (P. 60) P HQ HQ 1600 x 1200 Record mode (P. 59) Green lamp (P. 42) This indicates the same status as the green lamp on the right of the viewfinder. Flash stand-by/Flash charge (P. 49) This indicates the same status as the orange lamp on the right of the viewfinder.

• Press the shutter button gently using the ball of your finger. If it is pressed hard, the camera will move. • Recorded pictures will be saved on the card regardless of whether the camera is turned off or the battery is changed or removed. • Never open the card cover, remove the battery or disconnect the AC adapter while the orange lamp is blinking. Doing so could destroy stored pictures and prevent storage of the pictures you have just taken. • When taking pictures against strong backlight, the area of the picture in shadow may appear colored. Note TIPS The green lamp blinks. TYou are too close to the subject. Take the picture at least 50 cm away from the subject. When the distance from the camera to the subject is less than 50 cm/1.6 ft, select the macro mode. ~ “Macro mode shooting” (P. 52) TDepending on the subject, the focus may not be locked. ~ “Subjects that are difficult to focus on” (P. 45) The monitor turns off automatically. TIf the camera is not used for approximately 3 minutes, the monitor turns off automatically. Touch the shutter button or arrow pad to turn the monitor on again. The monitor is hard to see. TBright light, such as direct sunlight, may cause vertical lines to appear on the monitor screen. In this case, use the viewfinder. This does not affect recorded pictures. 4 Take a picture by following the same procedure as when shooting with the viewfinder. ~ “Taking still pictures using the viewfinder” (P. 40)

Comparison of the viewfinder & monitor • The camera records a wider area than the image in the viewfinder. • As you get closer to the subject, the actual image recorded becomes lower than the one in the viewfinder (see left). Viewfinder Camera movement does not occur easily and subjects can be seen clearly even in bright places. Little battery power is used. When close to a subject, the image in the viewfinder is a little different from the picture that the camera actually records. Use the viewfinder for general snapshots (landscape pictures, casual shots, etc.). Monitor You can check the picture area that the camera actually records more accurately. Camera movement can occur easily and subjects may be difficult to see in bright/dark places. The monitor uses more battery power than the viewfinder. Use the monitor when you want to shoot while checking the picture area that the camera actually records, or to take close-up shots of people, flowers, etc. Advantages Disadvantages Tips

If the subject is difficult to focus on, lock the focus before shooting as explained below. This is called focus lock. How to lock the focus 1 Open the lens barrier fully. 2 Position the AF target mark on the subject you want to focus on. • When shooting a hard-to-focus subject, point the camera at an object about the same distance away as the subject. 3 Press the shutter button halfway. • When the focus and exposure are locked, the green lamp lights. • When the green lamp blinks, the focus is not locked. Release your finger from the shutter button, re-position your subject and press the shutter button halfway again. 4 Keeping the shutter button pressed halfway, recompose your shot. 5 Press the shutter button fully. AF target mark Shutter button Shutter button Orange lamp Green lamp

Subjects that are difficult to focus on Under certain types of conditions, the auto focus may not work properly. If this happens, focus on an object with high contrast at the same distance as the intended subject (focus lock), recompose your shot and then take the picture. If the subject has no vertical lines, hold the camera vertically and focus the camera using the focus lock function by pressing the shutter button halfway, then return the camera to the horizontal position while keeping the button pressed halfway and take the picture. Subject with low contrast Subject with an extremely bright area in the center of the frame The green lamp blinks. The subject cannot be brought into focus. The green lamp lights, but the subject cannot be brought into focus. Subject without vertical lines Fast-moving subject The subject to be focused on is not in the center of the frame Subjects at different distances TIPS The green lamp blinks. TYou are too close to the subject. Take the picture at least 50 cm away from the subject. When the distance from the camera to the subject is less than 50 cm/1.6 ft, select the macro mode. ~ “Macro mode shooting” (P. 52) TDepending on the subject, the focus may not be locked. ~ “Subjects that are difficult to focus on” (See below.)

back or stored as the other still pictures using the index function. 1 Open the lens barrier fully. 2 Press . • The top menu is displayed. 3 Press Ñ to select . • Movie recording is set and the camera returns to the shooting mode. • The mark and the total recordable time depending on the card memory capacity are displayed on the monitor. 4 Decide the composition while looking at the image on the monitor. 5 Press the shutter button halfway. • The focus is locked. 6 Press the shutter button fully to start recording. • The orange lamp on the right of the viewfinder lights. • The camera always sets the best exposure, even if the subject moves. • During movie recording, lights red and the time you can shoot is displayed. 7 Press the shutter button again to stop recording. • The orange lamp blinks while the movie is stored on the card. • When the remaining recording time has been used up, recording stops automatically. Seconds remaining Arrow pad (ÑñÉí) MODE RESET MODE MENU Shutter button

(movie) mode. • The camera enters the still picture shooting mode when the lens barrier is closed. ~ “ALL RESET - Saving the settings” (P. 84) • During movie recording, the flash is disabled. • It takes longer to store movies than still pictures. • The seconds remaining varies depending on the record mode and the amount of space available on the card. • You cannot record movies with sound. Note

1 Open the lens barrier fully. 2 Press Ñ. • The monitor turns on and the zoom bar appears. The subject is magnified by 1.3 times. 3 Press Ññ while looking at the image on the monitor. • Each time you press Ñ, the zoom magnification changes in the following sequence: 1 time T 1.3 times T 1.6 times T 2.0 times T 2.5 times. • Each time you press ñ, the zoom magnification changes in the following sequence: 2.5 times T 2.0 times T 1.6 times T 1.3 times T 1 time. • The zoom magnification changes continuously while holding down Ñ or ñ. 4 Take the picture. 48 3 Shooting basics P HQ HQ 1600 x 1200 T W Zoom (Digital zoom) The cursor moves on the zoom indicator according to the zoom magnification. Arrow pad (ÑñÉí) Shutter button • Pictures taken with the digital zoom may appear grainy. • Camera movement is likely to occur at higher magnifications. • Turning the monitor off cancels the digital zoom. Note

• The flash does not fire in the movie record mode or during Panorama shooting. Note Select the flash mode best suited to the light conditions and the effect you want to achieve. 1 Open the lens barrier fully. 2 Press í ( ). • The monitor turns on. • The current flash setting is displayed. 3 Press í again to set the flash mode. • Each time you press í, the flash mode changes in the following sequence: “AUTO” – “ Red-eye reduction” – “ Fill-in flash” – “ Flash off”. 4 Press the shutter button halfway. • When the flash fires, the orange lamp lights steady. 5 Press the shutter button fully to take the picture. Flash working range: 0.2 - 3.3 m (0.7 - 10.8 ft) TIPS The orange lamp blinks. TThe flash is charging. Wait until the lamp goes off. í ( ) P HQ HQ 1600 x 1200 AUTO Shutter button

• After the pre-flash, it takes about 1 second before the shutter is released. Hold the camera firmly to avoid camera movement. • Effectiveness may be limited if the subject is not looking directly at the pre-flashes, or if the shooting range is too far. Individual physical characteristics may also limit effectiveness. Note �Auto-flash (No indication) The flash fires automatically in low light or backlight conditions. To shoot a subject with backlight, position the AF target mark over the subject. �Red-eye reduction flash ( ) The light from the flash may make the subject’s eyes appear red in the picture. The red-eye reduction flash mode reduces this phenomenon by emitting pre-flashes before firing the regular flash. This helps accustom the subject’s eyes to the bright light and minimizes the red-eye phenomenon. The subject’s eyes appear red. • The fill-in flash may not have the desired effect under excessively bright light. Note �Fill-in flash ( ) The flash fires regardless of the available light. This mode is useful for eliminating shadows on the subject’s face (such as shadows from tree leaves), in a backlight situation, or for correcting the color shift produced by artificial lighting (especially fluorescent light).

• Since a slow shutter speed is automatically selected in low light situations when in the flash off mode, the use of a tripod is recommended to prevent your pictures from being blurred by camera movement. Note �Flash off ( ) The flash does not fire even in low light conditions. Use this mode in situations where flash photography is not desired or is prohibited, such as in an art museum. You can also use this mode when you want to shoot a natural-looking twilight or night scene.

4 Advanced shooting The macro mode allows you to shoot at a distance of 20 cm to 50 cm (0.7 ft. to 1.6 ft.) from your subject. You can also shoot subjects which are at a distance of over 50 cm (1.6 ft.). However, compared to shots between 20 cm and 50 cm, the camera may take more time to focus on the subject. With the macro mode • If you are close to a subject, the picture in the viewfinder is different from the area that the camera actually records. For macro mode shooting, we recommend using the monitor. • If you use the flash in macro shooting, shadows may be conspicuous and the correct exposure may not be achieved. Check the recorded image on the monitor. Note 1 Open the lens barrier fully. 2 In the shooting mode top menu, select MODE MENU T CAMERA T T ON, and press . ~ “How to use the mode menu” (P. 30) • Press again to exit the menu. 3 Take the picture while viewing the monitor. Normal shooting Arrow pad (ÑñÉí)

securely on a tripod or set it on a level surface for self-timer shooting. This function is useful for taking pictures where you want to be included in the photograph. 1 Open the lens barrier fully. 2 Press É ( ). • The monitor turns on. 3 Press É again to set the self-timer mode. • The setting changes between OFF and ON each time É is pressed. When the self- timer mode is selected, is displayed on the monitor. 4 Take the picture. Press the shutter button to start the timer and take the picture. • The self-timer lamp lights for approximately 10 seconds, then starts blinking. After blinking for approximately 2 seconds, the picture is taken. • The self-timer mode is automatically canceled after one shot. Self-timer lamp É ( ) ON P HQ HQ 1600 x 1200 Self-timer mark

In a backlight situation, your subject may appear dark if the picture is taken with the normal metering value (center-weighted average light metering). In this case, by changing the metering area to the center of the viewfinder (spot metering), a subject can be shot with optimal exposure regardless of the background light. OFF: Meters the entire viewfinder to obtain the optimum exposure. (No indication is displayed on the monitor.) ON (spot metering): Meters only the center of the viewfinder to obtain the appropriate exposure for a subject there. 1 In the shooting mode top menu, select MODE MENU T CAMERA T T ON, and press . ~ “How to use the mode menu” (P. 30) • Press again to exit the menu. 2 Take the picture. Arrow pad (ÑñÉí)

You can take advantage of panorama shooting with the Olympus xD-Picture Card. Panorama shooting lets you connect pictures with overlapping edges into a single panoramic picture, using the CAMEDIA Master software contained on the CD-ROM provided. Connects pictures from left to right. Connects pictures from bottom to top. 1 In the shooting mode top menu, select MODE MENU T CAMERA T PANORAMA, and press í. ~ “How to use the mode menu” (P. 30) • The monitor turns on. • The PANORAMA mode is set. 2 On the monitor, use the arrow pad to choose the direction you want the pictures connected. í : Connects the pictures from left to right. É : Connects the pictures from right to left. Ñ : Connects the pictures from bottom to top. ñ : Connects the pictures from top to bottom. Arrow pad (ÑñÉí)

3 Make sure that the edges of the pictures overlap, then take your pictures. • Focus, exposure and white balance are set by the first picture. Do not select an extremely bright subject (such as the sun) for the first picture. • Panorama shooting is possible for up to 10 pictures. • When you have taken 10 pictures, a warning mark is displayed. 4 Press to finish panorama shooting. • The frame on the screen disappears and the camera returns to the normal shooting mode. • The panorama mode is only available with Olympus xD-Picture Card. • Your computer’s memory may be insufficient if you take too many panorama pictures in HQ or SHQ mode. You are recommended to use SQ1/SQ2 mode for panorama shooting. • During panorama shooting, the flash is not available. • The camera itself cannot connect panorama pictures. The CAMEDIA Master software is necessary to connect the pictures. Note When shooting, make sure that the edges (right/left/top/bottom) of the images overlap, so that the CAMEDIA Master software can correctly connect the pictures.

This function allows you to combine two pictures taken in succession and store them as a single picture. You can combine two different subjects in one picture. 1 In the shooting mode top menu, select MODE MENU T CAMERA T 2 IN 1, and press í. ~ “How to use the mode menu” (P. 30) • The monitor turns on. • The two-in-one picture mode is set. 2 Take the first shot while observing your subject on the monitor. • The subject will be positioned on the left in the combined picture. 3 Take the second shot. • The subject will be positioned on the right in the combined picture. • The first and second shots are saved as a single picture. Picture when played back Picture when shooting P HQ 1600 x 1200 1st P HQ 1600 x 1200 2nd Arrow pad (ÑñÉí)

• When the battery power is exhausted ( blinks), the flash automatically turns off. • The two-in-one picture mode is canceled when is pressed or the lens barrier is closed. Press to cancel the two-in-one picture mode after the first shot has been taken. The first picture will not be stored. Note

You can select a record mode in which to take pictures or shoot movies. Choose the best record mode for your purposes (printing, editing on a PC, website editing, etc.). For details of the different record modes, resolutions and number of pictures storable on the card, refer to the table on the next page. Record mode SHQ HQ SQ1/SQ2 Description • A high quality mode. • Fewer images can be saved to a card. • Takes longer to store the images. Uses • Good for printing. • Can be enlarged to A4 (210mm � 297mm / 8.3'' � 11.7'') size. • Good for processing on a PC. • Factory default setting. Uses • Good for editing on a PC or printing in postcard size. • The resolutions are smaller than in SHQ or HQ. • A standard quality mode. • More images can be saved to a card. Uses • Attaching images to e-mail or simply viewing them on a PC. Quality Clearer Normal File size Larger Smaller

Still picture record modes Movie record modes • The card memory capacity listed in the table is approximate. • The number of remaining pictures may change according to the subject or factors like whether print reservations have been made or not. In certain instances, the number of remaining pictures displayed on the monitor may not change even when a picture is taken or a stored image is erased. Note SHQ HQ SQ1 SQ2 11 32 76 165 1600 x 1200 1024 x 768 640 x 480 Record mode Resolution (No. of pixels) Memory capacity in number of shots (using a 16 MB card) HQ SQ 15 seconds 60 seconds 320 x 240 (15 frames/sec) 160 x 120 (15 frames/sec) Record mode Resolution (Frames per second) Memory capacity in seconds per movie ● In the mode, the total recording time is displayed on-screen. Total recording time depends on the memory capacity of the card.

1 In the shooting mode top menu, press É to select (P. 29). 2 Press Ññ to select the desired record mode. • For still pictures, you can choose from SHQ, HQ, SQ1 and SQ2. • For movies, you can choose HQ or SQ. 3 Press . • Press again to exit the menu. MODE RESET MODE MENU CANCEL CANCEL SELECT SELECT GO GO SHQ SHQ 1600 x 1200 HQ 1600 x 1200 SQ1 SQ1 1024 x 768 SQ2 SQ2 640 x 480 CANCEL CANCEL SELECT SELECT GO GO HQ 320 x 240 SQ SQ 160 x 120 Arrow pad (ÑñÉí)

TIPS • Resolution The number of pixels (horizontal x vertical) used when saving an image. If the image will be printed, higher resolutions (larger numbers) are recommended so that the image will be clearer. However, higher resolutions make the file size (amount of data) larger, so the number of pictures that can be saved will be fewer. • Pixels A pixel is the smallest unit (dot) used to make up an image. Clear large-sized printed images require millions of pixels. • Resolution and picture size on a computer screen When a picture is transferred to a computer, the size of the picture on the computer screen varies depending on the computer’s monitor setting. For instance, a picture taken in 1024 � 768 resolution is the same size as the screen if you set the picture to 1� when the monitor setting is 1024 � 768. However, if the monitor setting is over 1024 � 768 (such as 1280 � 1024), the picture only takes up part of the screen.

1 In the shooting mode top menu, select MODE MENU T CAMERA T , then press í. ~ “How to use the mode menu” (P. 30) 2 Press Ññ to select the exposure compensation value. • Select a [ + ] value to brighten the image or a [ – ] value to darken the image. 3 Press . • Press again to exit the menu. 4 Take the picture. In some situations, you may get better results when the exposure that the camera sets is compensated (adjusted) manually. You can adjust the brightness in the range of ±2.0 in 1/ 2 steps. –2.0 +2.0 0.0 SET CAMERA CARD PIC SCENE SELECT SCENE SELECT PANORAMA 0.0 Arrow pad (ÑñÉí)

• If the flash is used, the image brightness (exposure) may differ from the intended brightness (exposure). • Exposure compensation cannot correct the image if the surroundings of the subject are extremely bright or dark. Note TIPS • Often bright subjects (such as snow) will turn out darker than their natural colors. Adjusting toward + makes these subjects closer to their real shades. For the same reason, adjust toward – when shooting dark subjects.

3 Take the picture. Adjusting the White balance Color reproduction differs depending on the light conditions. For instance, when daylight, the setting sun or tungsten lighting are reflected on white paper, the shade of white produced will be slightly different for each. By setting the WB (white balance), you can achieve more natural-looking colors. 1 In the shooting mode top menu, select MODE MENU T PICTURE T WB T AUTO, , , or . ~ “How to use the mode menu” (P. 30) AUTO (No indication) : The white balance is adjusted automatically so that colors look natural irrespective of the light source. (Sunlight) : For natural colors under a clear sky. (Overcast) : For natural colors under a cloudy sky. (Tungsten) : For natural colors under tungsten lighting. (Fluorescent) : For natural colors under fluorescent lighting. SET CAM CARD PICTURE WB WB AUTO Arrow pad (ÑñÉí)

• White balance may not be effective under some special light sources. • After setting a white balance mode other than AUTO, play back the picture and check the colors on the monitor. • When the flash is fired with a white balance setting other than AUTO, colors may appear different in the resulting picture from the colors you see on the monitor. Note

5 Playback 1 Press with the lens barrier closed. • The monitor turns on and displays the last picture taken. (Single-frame playback) 2 Use the arrow pad to play back other pictures. 3 Press to cancel playback. • The monitor and camera turn off. Close-up playback (Ñ) (P. 69) Index display(ñ) (P. 70) Displays the next picture. (í) Displays the previous picture. (É) • If the camera is not used for over 3 minutes, it turns off automatically. Note Arrow pad (ÑñÉí)

QUICK VIEW This function lets you play back pictures while the camera is in the shooting mode. This is useful when you want to check shooting results and resume shooting quickly. Every function also can be used like normal playback. 1 Press twice quickly (double-click) while in the shooting mode. • The camera immediately enters the playback mode and displays the last picture taken. (Single-frame playback) 2 Press the shutter button halfway to return to the shooting mode. • The camera returns to shooting mode, and is ready to take pictures. • If the shutter button is pressed all the way, a picture will be taken. Shutter Button

• Pictures cannot be stored in an enlarged state. Note 4.0X 4.0X Arrow pad (ÑñÉí) Close-up playback Pictures displayed on the monitor can be enlarged in steps up to 4 times the original size. 1 Use the arrow pad (Éí) to display the still picture you want to enlarge. • You cannot enlarge pictures with . 2 Press Ñ. • The picture is enlarged. • Each time you press Ñ, the picture is enlarged by the following magnifications: 1.5 X T 2 X T 2.5 X T 3 X T 3.5 X T 4.0 X. • To return to the original size (1 X), press ñ. 3 Press when the picture is enlarged.The screen enters the scroll mode. By pressing the arrow pad, you can shift the picture in the up, down, left or right direction.To exit the scroll mode, press again. 4 After you exit the scroll mode, press ñ to return to the original size (1 X). You can shift the picture using the arrow pad. OK/Menu button

Index display This function lets you show several pictures at the same time on the monitor. The number of pictures shown can be 4, 9 or 16. 1 In the single-frame playback mode, press ñ. • Use the arrow pad to select the picture. É : Moves to the previous frame. í : Moves to the next frame. • To return to single-frame playback, press Ñ. �Selecting the number of pictures This function lets you select the number of pictures in an index display from 4, 9 and 16. 1 In the playback mode top menu, select MODE MENU T SETUP T , and press í. ~ “How to use the mode menu” (P. 30) 2 Press Ññ to choose the number of pictures (4, 9 or 16), then press . • Press again to exit the menu. SETUP CAM CARD PIC 4 9 16 VIDEO OUT Arrow pad (ÑñÉí)

Slideshow This function displays still pictures stored on the card one after another. Only the first frame of movies is played back. 1 Display a still picture, then press to display the top menu. 2 Press Ñ ( ) to start the slideshow. 3 Press to stop the slideshow. • The slideshow will not stop until you cancel it by pressing . • You are recommended to use the optional AC adapter when running a slideshow for a long period of time. If the battery is used, the camera will stop the slideshow after about 30 minutes and turn off. Note Ñ ERASE INFO MODE MENU

Picture Rotation Pictures taken with the camera held vertically are displayed horizontally. This function lets you turn such pictures 90 degrees clockwise or counterclockwise so that they are displayed vertically. 1 In the playback mode top menu, select MODE MENU T PLAY T , and press í. 2 Press Ññ and select 0°, +90° or –90°. • The picture is rotated and saved that way. • To close the menu, press twice. +90° 0° –90° • The following pictures cannot be rotated. Movies, protected pictures, pictures edited on a PC, pictures taken with another camera. • New picture orientations are saved even when the camera is turned off. Note ’03.09.12 12:30 11 03.09.12 12:30 11 ’03.09.12 12:30 11 03.09.12 12:30 11 ’03.09.12 12:30 11 03.09.12 12:30 11 Arrow pad (ÑñÉí)

images on your TV. 1 Make sure that the camera and the TV are turned off. Connect the Video cable to the VIDEO OUT jack on the camera and the video input terminal on the TV. 2 Turn the TV on and switch to the video input mode. • For details of switching to video input, refer to your TV’s instruction manual. 3 Press . • The last picture taken is displayed on the TV. Use the arrow pad to select the picture you want to display. • The close-up playback, index display and slideshow functions can also be used on a TV screen. Playback on a TV Connect to the TV’s video input (yellow) terminal. Video cable VIDEO OUT jack • Make sure that the camera’s video output signal type is the same as the TV’s video signal type. ~ “VIDEO OUT - Video output selection” (P. 92) • The camera’s monitor turns off automatically when the Video cable is connected to the camera. • Be sure to use the Video cable provided to connect the camera to the TV. • The picture may appear off-center on the TV screen. • When pictures are compressed in order to fit the entire picture on the TV screen, a black frame may appear around the picture. If the picture is output to a video printer via the TV, the black frame may be printed. • When images are played back on a PAL-system TV, their size on the screen will be smaller. Note TIPS • You are recommended to use the optional AC adapter when using the camera with a TV. Connector cover

1 Press with the lens barrier closed. • The monitor turns on. 2 Use the arrow pad to display the picture with . ~ “Viewing still pictures” (P. 67) 3 Press . • The top menu is displayed. 4 Press Ñ to select MOVIE PLAY. O" / 15" O" / 15" ERASE INFO MODE MENU MOVIE PLAY Arrow pad (ÑñÉí) mark

5 Press Ññ to select PLAYBACK, then press . • The movie is played back. • After playback, the menu is displayed. PLAYBACK : Plays back the entire movie again. FRAME BY FRAME :Plays back the movie manually one frame at a time. EXIT : Leaves the movie playback mode. Press Ññ to select from PLAYBACK, FRAME BY FRAME or EXIT, then press . ●When FRAME BY FRAME is selected Ñ : Displays the first frame of the movie. ñ : Displays the last frame of the movie. í : Displays the next frame. The movie can be displayed continuously by holding the button down. É : Displays the previous frame. The movie can be displayed continuously in reverse by holding the button down. : Displays the MOVIE PLAY menu. • When playing back a movie, the access time will vary depending on the length and record mode of the movie. Note TIPS • Movies can also be played back in the shooting mode using QUICK VIEW. ~ “QUICK VIEW ”(P. 68) SELECT GO MOVIE PLAY MOVIE PLAY PLAYBACK EXIT FRAME BY FRAME FRAME BY FRAME

erasing them. Protected pictures cannot be erased by the single-frame/all- frame erase function. 1 Press with the lens barrier closed. • The monitor turns on. 2 Use the arrow pad to display the picture you want to protect. ~ “Viewing still pictures” (P. 67) 3 Press . • The top menu is displayed. 4 In the top menu, select MODE MENU T PLAY T , and press í. ~ “How to use the mode menu” (P. 30) 5 Press Ññ to select ON, then press . • To cancel protection, select OFF. Displayed when a picture is protected. • Protected pictures cannot be erased by the single-frame/all-frame erase function, but they are all erased by formatting. Note Arrow pad (ÑñÉí)

1 Press . • The monitor turns on. 2 Use the arrow pad to display the picture you want to erase. ~ “Viewing still pictures” (P. 67) 3 Press . • The top menu is displayed. 4 Press ñ to select . 5 Press Ññ to select YES, then press . • The picture is erased and the menu is closed. • You cannot erase pictures that are protected. Cancel the protection before erasing such pictures. • Once erased, pictures cannot be restored. Check each picture before erasing to avoid accidentally erasing pictures you want to keep. ~ “Protecting pictures” (P. 76) Note SELECT GO ERASE YES NO NO Recorded pictures can be erased. There are two types of erase: Single- frame erase, which erases only the picture that is displayed on the monitor, and all-frame erase, which erases all the pictures on the card. Arrow pad (ÑñÉí)

1 In the playback mode top menu, select MODE MENU T CARD T CARD SETUP, and press í. ~ “How to use the mode menu” (P. 30) 2 Press Ññ to select ALL ERASE, then press . 3 Press Ññ to select YES, then press . • All the pictures are erased. Protected pictures are not erased. CARD SETUP CARD SETUP ALL ERASE FORMAT FORMAT CANCEL CANCEL SELECT SELECT GO GO SELECT GO ALL ERASE ALL ERASE YES CAUTION ERASING ALL NO NO Arrow pad (ÑñÉí)

This function lets you edit still pictures and store them as new pictures. The following editing operations are possible. BLACK&WHITE : Converts pictures into black and white pictures and stores them as new pictures. SEPIA : Converts pictures into sepia-toned pictures and stores them as new pictures. : Changes the picture size to 640 x 480 or 320 x 240 and stores the picture as a new picture. 1 Press with the lens barrier closed. • The monitor turns on. 2 Use the arrow pad to display the still picture you want to edit. ~ “Viewing still pictures” (P. 67) 3 Press . • The top menu is displayed. 4 In the top menu, select MODE MENU T EDIT, then choose each item. ~ “How to use the mode menu” (P. 30) • Select BLACK&WHITE (See below). • Select SEPIA ~ P. 80 • Select ~ P. 80 Creating black and white pictures 5 Select BLACK&WHITE, then press í. 6 Press Ññ to select BLACK&WHITE, then press . • The BUSY bar is displayed, then the camera returns to the playback mode. The black and white picture is stored as a separate picture from the original. • To cancel the editing, select CANCEL and press . BLACK & WHITE WHITE BLACK & WHITE CANCEL EXIT EXIT SELECT SELECT GO GO Arrow pad (ÑñÉí)

• You cannot create black and white movies. • You cannot create a black and white picture if there is insufficient memory space on the card. Note Creating sepia-toned pictures 5 Select SEPIA, then press í. 6 Press Ññ to select SEPIA, then press . • The BUSY bar is displayed, then the camera returns to the playback mode. The sepia-toned picture is stored as a separate picture from the original. • To cancel the editing, select CANCEL and press . • You cannot create sepia-toned movies. • You cannot create a sepia-toned picture if there is insufficient memory space on the card. Note Resizing pictures 5 Select , then press í. 6 Press Ññ to select the new picture size, then press . • The BUSY bar is displayed, then the camera returns to the playback mode. The newly created picture is stored as a separate picture from the original. • To cancel the resizing, select CANCEL, and press . SEPIA SEPIA CANCEL CANCEL EXIT EXIT SELECT SELECT GO GO 640 x 480 CANCEL CANCEL 320 x 240 EXIT EXIT SELECT SELECT GO GO

• Resizing is not possible in the following cases. Movies, pictures edited on a PC, or when there is insufficient memory space on the card. • If the size of a picture is 640 x 480 or smaller, you cannot select 640 x 480. • If the size of a picture is 320 x 240, you cannot select . Note

9 frames extracted from the recorded movie are displayed as an index to show the movie at one glance. Indexes can be stored on the card as still pictures. 1 Use the arrow pad to select a picture with . 2 In the top menu, select MODE MENU T EDIT T INDEX, then press í. ~ “How to use the mode menu” (P. 30) 3 Press ÑñÉí to select the first frame for the index, then press . 4 Press ÑñÉí to select the last frame for the index, then press . SET PLAY CARD EDIT INDEX GO GO 15 15 0 GO GO Elapsed time/Total time First-frame selection screen Last-frame selection screen Arrow pad (ÑñÉí)

TIPS • The index is stored as a still picture in a different record mode from the original movie. • The interval between the frames that are automatically picked out varies depending on the length of the movie. • An index consists of 9 frames. • You cannot create an index if there is insufficient memory space on the card. Note Record mode when the Record mode when stored movie was shot as an index HQ SQ1 (1024 x 768 pixels) SQ SQ2 (640 x 480 pixels) 5 Press Ññ to select OK, then press . • The 9 frames extracted from the movie appear as an index display, then the camera returns to the playback mode. The index is stored as a new picture. RESET : If you want to choose different frames, select RESET, press , and then repeat from step 3. CANCEL : To cancel your selections, select CANCEL and press . SELECT SELECT GO GO INDEX INDEX OK CANCEL CANCEL RESET RESET

6 Useful functions This function lets you restore functions (exposure compensation, white balance, etc.) to the factory default settings. When MODE RESET is set in the (movie) mode, the camera returns to the PHOTO (still picture shooting) mode. The following settings are not reset: Settings in the MODE MENU’s SETUP tab (ALL RESET, , REC VIEW, , etc.) 1 In the shooting mode top menu, press ñ to select MODE RESET (P. 29). 2 Press Ññ to select ALL RESET, then press . • Press again to exit the menu. This function lets you choose whether or not to save the current camera settings after the power is turned off. The settings affected by ALL RESET are listed on next page. ALL RESET is available in both the shooting mode and playback mode. ON : All settings are returned to the factory default settings after the power is turned off. Example: If ALL RESET is ON, even if the setting is SQ1 when the camera is turned off, it will be at HQ when the camera is turned on again. OFF : The settings made before the power is turned off are saved. The ALL RESET setting (ON/OFF) applies to all the modes. If ALL RESET is set to OFF in one shooting mode, this setting applies to all other shooting modes, as well as the playback and modes. ALL RESET does not affect items included in the MODE MENU’s SETUP tab even when set to ON. 1 In the top menu, select MODE MENU T SETUP T ALL RESET T OFF or ON, and press . ~ “How to use the mode menu” (P. 30) • Press again to exit the menu. ALL RESET - Saving the settings MODE RESET MODE MENU

6 Useful functions Function Factory default setting Ref. page Monitor OFF P. 41 Shooting mode PHOTO (still picture shooting mode) P. 37 SCENE SELECT P (Program auto) P. 37 Digital zoom 1X P. 48 FLASH AUTO P. 49 0.0 P. 63 WB AUTO P. 65 HQ P. 59 OFF P. 52 OFF P. 54 ●Settings that ALL RESET returns to their factory default settings This function lets you format a card. Formatting prepares cards to receive data. Before using non-Olympus cards or cards which have been formatted on a PC, you must format the card with this camera. All existing data, including protected pictures, are erased when the card is formatted. Make sure that you save or transfer important data to a PC before formatting a used card. 1 In the top menu, select MODE MENU T CARD T CARD SETUP, and press í. ~ “How to use the mode menu” (P 30) • Shooting mode The FORMAT screen is displayed. • Playback mode The CARD SETUP screen is displayed. CARD SETUP - Formatting cards Arrow pad (ÑñÉí)

6 Useful functions 2 If the FORMAT screen is displayed, press Ññ to select YES. If the CARD SETUP screen is displayed, press Ññ to select FORMAT, then press . When the FORMAT screen appears, press Ññ to select YES. 3 Press . • The BUSY bar is displayed and the card is formatted. SELECT GO YES CAUTION ERASING ALL NO FORMAT FORMAT CARD SETUP CARD SETUP ALL ERASE FORMAT CANCEL CANCEL SELECT SELECT GO GO SELECT GO YES CAUTION ERASING ALL NO FORMAT FORMAT Never do the following during formatting, as they may cause the card to malfunction. • Open the card cover. • Open the battery compartment cover. • Connect or disconnect the AC adapter. Note

This function lets you display detailed shooting information on the monitor for 3 seconds in the playback mode. For details of the information displayed, see “Monitor indications” (P. 9). 1 Pressing É in the playback mode top menu displays the full amount of shooting information on the monitor (ON) (P. 29). • To turn INFO off, press to bring up the top menu and press É (OFF). When INFO is ON When INFO is OFF É HQ HQ SIZE: 1600x1200 SIZE: 1600x1200 +2.0 2.0 ’03.09.12 12:30 03.09.12 12:30 FILE: 100 FILE: 100–0020 0020 x10 x10 ’03.09.12 12:30 11 03.09.12 12:30 11 HQ HQ

the monitor. ON : The picture being recorded to the card is displayed. This is useful for making a brief check of the picture you have just taken. You can resume shooting anytime during REC VIEW. OFF : The picture being recorded to the card is not displayed. This is useful when you want to prepare for your next shot while the previous picture is being recorded. 1 In the shooting mode top menu, select MODE MENU T SETUP T REC VIEW T OFF or ON, and press . ~ “How to use the mode menu” (P. 30) • Press again to exit the menu. REC VIEW - Viewing a picture immediately after shooting Adjusting the monitor brightness You can adjust the brightness of the monitor according to the surrounding conditions to make it easier to see. 1 In the top menu, select MODE MENU T SETUP T , and press í. ~ “How to use the mode menu” (P. 30) 2 Press Ññ to adjust the brightness while observing the monitor. Pressing Ñ brightens the monitor, and pressing ñ darkens it. Press . • The monitor brightness is set. • Press again to exit the menu. Arrow pad (ÑñÉí)

This function lets you turn on/off the beep sound used for warnings, etc. The beep sound can be adjusted in either the shooting mode or the playback mode. ON : There is a beep for warnings. OFF : There is no beep for warnings. 1 In the top menu, select MODE MENU T SETUP T T OFF or ON, and press . ~ “How to use the mode menu” (P. 30) • Press again to exit the menu. FILE NAME The camera automatically creates file names and folder names for images. Examples are shown below. ● Month: Jan. - Sep. = 1 - 9, Oct. = A, Nov. = B, Dec. = C There are two choices here: RESET or AUTO. Choose the one that is best for you when transferring images to a computer. Arrow pad (ÑñÉí)

folder number also changes (for example, from No. 100 to No. 101). • When both the folder and file numbers reach their maximum (999/9999), you cannot store any more pictures, even if the card is not full yet. Insert a different card. Note 1 In the shooting mode top menu, select MODE MENU T SETUP T FILE NAME T RESET or AUTO. Press . ~ “How to use the mode menu” (P. 30) • Press again to exit the menu . � RESET When RESET is selected, the file number and folder number are reset every time a new card is inserted in the camera. The folder number returns to No. 100, and the file number returns to No. 0001. This is useful when grouping files on separate cards. � AUTO When AUTO is selected, the same folder number is retained, but the file number continues from the previous card, so that the same file number is not used on different cards. This helps you to manage multiple cards. This is useful when a group of files stretches over more than one card. Arrow pad (ÑñÉí)

and image processing functions. It is not necessary to operate this function frequently. Approximately once a year is recommended. Wait a few minutes after the monitor is used or continuous shots are taken to allow for proper performance of the Pixel Mapping function. 1 In the shooting mode top menu, select MODE MENU T SETUP T PIXEL MAPPING, and press í. • START is displayed. ~ “How to use the mode menu” (P. 30) 2 Press . • The BUSY bar is displayed during Pixel Mapping. When Pixel Mapping is finished, the screen returns to the mode menu. • If you accidentally turn the camera off during Pixel Mapping, start again from step 1. Note Arrow pad (ÑñÉí)

You can select NTSC or PAL according to your TV’s video signal type. Set the video output before connecting the video cable to the camera. If you use the wrong video signal type, you will not be able to play back the recorded pictures properly on your TV. You can change the NTSC/PAL setting in either the shooting mode or the playback mode. 1 In the top menu, select MODE MENU T SETUP T VIDEO OUT T NTSC or PAL, and press . ~ “How to use the mode menu” (P. 30) • Press again to exit the menu. • The factory default setting varies depending on the area where you purchased this camera. TIPS • TV video signal types & main regions Check the video signal type before using the camera. NTSC : Japan, Taiwan, Korea, North America PAL : European countries, China • NTSC (National Television Systems Committee) / PAL (Phase Alternating Line) Television formats. Arrow pad (ÑñÉí)

7 Print settings Several different printing options are available when you want to print out pictures. �Printing at a photo lab that supports DPOF or printing on a DPOF- compatible printer Store the print reservation data on the card. Print reservation allows you to save printing data (number of prints, date/time information, etc.) with the pictures stored on the card. ● What is DPOF? DPOF is short for Digital Print Order Format. DPOF is the format used to record automatic print information from digital cameras. If a card containing print reservation data is taken to a photo lab that supports the DPOF format, the pictures can be printed according to the DPOF reservations. Or pictures can be printed out at home on a personal DPOF-compatible printer. �Printing on an Olympus P-400, or P-200 digital color printer Printing is possible on specified printers without using a PC. For more details, refer to the printer's instruction manual. An xD-Picture Card cannot be inserted into the printer without a specified card adapter (sold separately). �Transferring pictures to a PC and printing them from a printer connected to the PC If your PC has software applications installed that support JPEG images (Internet browser, Paint Shop Pro, Photoshop, etc.), you can print out your pictures on a printer connected to the PC. (Printing is also possible using CAMEDIA Master software.) Check your software before printing. For details, refer to the application software's instructions. For instructions on how to transfer images, or connect the camera to a PC, see “DIGITAL CAMERA-PC CONNECTION OPERATION MANUAL” on the CD-ROM.

TIPS • JPEG (Joint Photographic Experts Group) A compression format for color still images. Photographs (images) shot using this camera are recorded onto the card in JPEG format when the record mode is set to SHQ, HQ or SQ. By downloading these images to a personal computer, users can edit them using graphics application software or view the images using an Internet web browser. • Picture size and printing The resolution of a computer/printer is generally based on the number of dots (pixel) per inch. This is called dpi (dots per inch). The higher the dpi value, the better the printed results. Keep in mind, however, that the dpi of the picture does not change. This means that when you print an image with a higher resolution, the size of the printed picture will be smaller. Although you can print magnified images, picture quality will decrease. If you want to print large, high-quality pictures, set the record mode as high as possible when taking the pictures. ~ “Changing the record mode” (P. 59) • DPOF reservations set by another device cannot be changed by this camera. Make changes using the original device. • If a card contains DPOF reservations set by another device, entering reservations using this camera may overwrite the previous reservations. • DPOF reservations can be performed for only the first 999 frames on a card. • If the card is full, print reservation is not available. "CARD FULL" is displayed. • Even if an image appears with the message “PICTURE ERROR”, it may be possible to make print reservations. In such a case, the print reservation icon ( ) does not appear when an image is displayed for full view. appears when multiple images are displayed (index-display mode), allowing you to confirm the print reservation. • Not all functions may be available on all printers or at all photo labs. • Print reservation may take considerable time when saving printing data to a card. Note

number of prints and whether or not to include the shooting date and time. 1 Play back a still picture. • You cannot print pictures with . 2 In the top menu, select MODE MENU T PLAY T , and press í. • If print reservation data is already stored on the card, the PRINT ORDER SETTING screen appears, giving you the choice of resetting the data or keeping it. Select RESET and press . 3 Press Ññ to select , then press . • The screen is displayed. 4 Press Ññ to select x (number of prints) or (date/time), then press í. � Set the number of prints Press Ññ to set the number of prints, then press . Ñ: Increases the number. ñ: Decreases the number. � Set the date/time printing options Press Ññ to select NO, DATE or TIME, then press . NO : The pictures are printed without the date and time. DATE : All the pictures are printed with the shooting date. TIME : All the pictures are printed with the shooting time. Press again. • The print reservation data is stored on the card and the screen returns to the playback menu. PRINT ORDER EXIT EXIT SELECT SELECT GO GO EXIT EXIT SELECT SELECT GO GO 0 EXIT EXIT SELECT SELECT GO GO NO NO DATE TIME TIME Arrow pad (ÑñÉí)

details (number of prints, date, etc.) of previously made reservations. Display the picture to be printed and select the desired number of prints. 1 Play back a still picture. • You cannot print pictures with . 2 In the top menu, select MODE MENU T PLAY T , and press í. • If data is already stored on the card, the PRINT ORDER SETTING screen appears, giving you the choice of resetting the data or keeping it. Select KEEP and press . 3 Press Ññ to select , then press . 4 Press ÑñÉí to select the frame you want to print. Press . • You can also use the index display to select the frame. ~ “Index display” (P. 70) 5 Press ÑñÉí to select the following. MORE : Sets the number of prints and date/time options. ~ Go to step 6. SINGLE PRINT : Prints a single frame. The date/time setting is not available. ~ Go to step 7. CANCEL : Cancels print reservation for the current frame. ~ “Resetting print reservation data” (P. 98). END : Completes the print reservation. ~ Go to step 10. PRINT ORDER PRINT ORDER EXIT EXIT SELECT SELECT GO GO SELECT GO HQ HQ ’03.09.12 12:30 24 03.09.12 12:30 24 END MORE CANCEL SINGLE PRINT Arrow pad (ÑñÉí)

x (number of prints) or (date/time) then press í. • x : See below. • : See below. � Set x (number of prints) Press Ññ to set the number of prints, then press . Ñ: Increases the number. ñ: Decreases the number. � Set (date/time printing options) Press Ññ to select NO, DATE or TIME, then press . NO : The pictures are printed without the date and time. DATE : The shooting date is added to all pictures with print reserve. TIME : The shooting time is added to all pictures with print reserve. 7 After setting x and , press . Print reservation is set and the screen in step 4 is restored. • appears on the current frame. 8 Press to display the single-frame reservation menu. 9 Press É to select END. • The PRINT ORDER screen appears. 10Press É repeatedly until the MODE MENU appears. • Press to exit the menu. EXIT EXIT SELECT SELECT GO GO 0 EXIT EXIT SELECT SELECT GO GO NO NO DATE TIME TIME END MORE CANCEL SINGLE PRINT SELECT GO HQ HQ ’03.09.12 12:30 24 03.09.12 12:30 24

This function allows you to reset the print reservation data for pictures stored on the card. There are two ways to reset print reservation: you can reset all print reservation data or you can reset the print reservation data for only the frames you do not need. 1 Display a still picture with . 2 In the top menu, select MODE MENU T PLAY T , and press í. • If print reservation data is already stored on the card, the PRINT ORDER SETTING screen appears. 3 To reset all print reservation data, press Ññ to select RESET, then press . ~ Go to step 8. To reset only the print reservation data for the frames that you do not need, press Ññ to select KEEP, then press . • If there is no print reservation data stored on the card, the PRINT ORDER SETTING screen does not appear. 4 Press Ññ to select on the PRINT ORDER screen, then press . 5 Press ÑñÉí to display the frame whose print reservation data you want to reset, then press . • The single-frame reservation menu is displayed. 6 Press ñ to select CANCEL. • Print reservation is canceled, and the screen in step 5 is restored. • disappears. 7 If you are finished resetting print reservation data, press to display the single-frame reservation menu. Press É. 8 Press É repeatedly until the MODE MENU appears. • Press to exit the menu. PRINT ORDER SETTING Screen PRINT ORDER SETTING EXIT EXIT SELECT SELECT GO GO RESET PRINT ORDERED KEEP KEEP Arrow pad (ÑñÉí) SELECT GO HQ HQ ’03.09.12 12:30 24 03.09.12 12:30 24

or it cannot be recognized. There is a problem with the card, so the camera will not function. Writing to the card is prohibited. The card is full. No more pictures can be taken or no more information such as print reservation can be recorded. There are no pictures on the card. There is a problem with the selected picture, so it cannot be played back on this camera. The card is not formatted. The card cover is open. Corrective action • Insert a card correctly or insert a different card. • If the card is dirty, wipe the gold contacts with a clean tissue and insert it again. If the problem is still not corrected, the card cannot be used. Insert a different card. Read-only has been set using a computer. Use the computer again to cancel the read-only setting. Replace the card or erase unwanted pictures. Before erasing, download important images to a PC. The card contains no pictures. Record pictures. Use image processing software to view the picture on a PC. If that cannot be done, the image file is damaged. Format the card. Close the card cover. Monitor indication NO CARD CARD ERROR CARD FULL NO PICTURE PICTURE ERROR CARD COVER OPEN SELECT GO CARD SETUP CARD SETUP POWER OFF FORMAT FORMAT WRITE-PROTECT