Olympus FE-330 Instruction Manual

camera better Quick Start Guide Get started using your camera right away. Button operations Menu operations Printing pictures Using OLYMPUS Master ( Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ( We recommend that you take test shots to get accustomed to your camera before taking important photographs. ( In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. ( The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Appendix FE-330/X-845/C-550

buttons by following along with the illustrations. Learn how to print pictures you have taken. Learn how to transfer and save pictures to a computer. Find out more about camera operations and how to take better pictures. Read about convenient functions and safety precautions to use your camera more effectively. Learn about the menus that control the functions and settings for basic operation. Button operations Menu operations Printing pictures Getting to know your camera better P. 11 P. 18 P. 30 P. 39 Using OLYMPUS Master P. 35 Quick Start Guide P. 3 Appendix P. 47

EN 3 Gather these items (box contents) ( Pull the strap tight so that it does not come loose. Digital Camera Strap Lithium Ion Battery (LI-42B) USB Cable AV Cable OLYMPUS Master 2 CD-ROM Items not shown: Instruction Manual (this manual) and the Warranty Card. Contents may vary depending on purchase location. Battery Charger (LI-40C) Attach the strap Quick Start Guide

4 EN Prepare the camera a. Charge the battery. ( Battery comes partially charged. b. Insert the battery and the xD-Picture Card (optional) into the camera. 2 1 3 Red light on: Charging Light off: Charging complete (Charging time: Approx. 5 hours) AC Wall Outlet Power Cable Battery Charger Lithium Ion Battery � Charging Indicator 1 2

Quick Start Guide ( With this camera, you can take pictures without inserting the optional xD- Picture Card™ (hereinafter referred to as “the card”). If you take pictures without inserting the card, the pictures will be stored in the internal memory. For details on the card, please refer to “The card” (P. 49). 3 (Insert the battery by putting in the marked side first, with the C marks toward the end of the camera, the B marks toward the center of the camera. If you insert the battery incorrectly, you may not be able to remove it. Do not use force. Contact authorized distributors/service centers. Damage to the battery exterior (scratches, etc.) may produce heat or an explosion. Battery lock knob (To remove the battery, press the battery lock knob in the direction of the arrow. 5 6 4 Notch Contact area (Orient the card as shown in the illustration and insert it straight into the card slot. Insert the card until it clicks into place. (To remove the card, push the card all the way in, release slowly, grasp the card and remove it.

6 EN Turn the camera on This explains how to turn on the camera in shooting mode. a. Set the mode dial to h. Still picture shooting modes b. Press the o button. ( To turn off the camera, press the o button once again. h The camera automatically determines the optimum settings for shooting pictures. P The camera automatically sets the optimum aperture value and shutter speed. h This function reduces blur incurred by a moving subject or camera shake when taking pictures. B Suitable for taking pictures of people. E Suitable for taking pictures of a landscape. f Select from 11 available scene modes, according to the shooting conditions. R Use the shooting guide displayed on the screen to shoot pictures according to the situation. When shooting movies When shooting still pictures o button X Y M Y M D D TIME ---- -- -- -- -- MENU CANCEL • This screen is displayed if the date and time are not set. O N Y X Hint The directions of the arrow pad is indicated with ONXY in the supplied instruction manual.

EN 7 Set the date and time a. Press the OF/< and NY buttons to select [Y]. • The first two digits of the year are fixed. b. Press the Y# button. c. Press the OF/< and NY buttons to select [M]. The date and time screen X Y M Y M D D TIME ---- -- -- -- -- MENU CANCEL Y-M-D Cancels the setting Hour Date formats (Y-M-D, M-D-Y, D-M-Y) Minute OF/< button NY button 2008 -- -- -- -- X Y M Y M D D TIME MENU CANCEL Y# button 2008 08 -- -- -- X Y M Y M D D TIME CANCEL MENU

Quick Start Guide d. Press the Y# button. e. Press the OF/< and NY buttons to select [D]. f. Press the Y# button. g. Press the OF/< and NY buttons to select the hours and minutes. • The time is displayed in the 24-hour format. h. Press the Y# button. i. Press the OF/< and NY buttons to select [Y/M/D]. j. After all settings have been set, press . • For a more accurate setting, press  when the time signal hits 00 seconds. 2008 08 26 -- -- X Y M Y M D D TIME MENU CANCEL 2008 08 26 12 30 OK X Y M Y M D D TIME CANCEL MENU SET 2008 08 26 12 30 OK X Y M D TIME CANCEL MENU SET Y M D  button 8M 8M 4 IN AUTO NORM NORM The number of storable still pictures is displayed.

EN 9 Take a picture a. Hold the camera. c. Shoot. Horizontal grip Vertical grip b. Focus. AUTO 4 IN 8M 8M NORM NORM Shutter Button (Press Halfway) • The AF target mark lights up green when the focus and exposure are locked. The shutter speed and aperture value are also displayed. • If the AF target mark blinks in red, the focus is not adjusted properly. Try locking the focus again. 1/1000 1/1000 F3.5 F3.5 AUTO AF target mark Place this mark over your subject. Shutter Button (Press Completely) The card access lamp blinks.

10 EN Review your pictures a. Press the q button. a. Press the X& and Y# buttons to display the picture you want to erase. b. Press the /S button. c. Press the OF/< button, select [YES], and press . Arrow pad Displays the next image Displays the previous image q button 1 IN 8M 8M 2008.08.26 2008.08.26 12:30 12:30 100-0001 100-0001 NORM NORM Erase pictures /S button ERASE ERASE OK IN NO NO YES SET CANCEL MENU OF/< button  button IN ERASE ERASE NO YES YES OK SET CANCEL MENU

Set the mode dial to a setting other than n, and lightly press the shutter button (halfway). The AF target mark lights up green when the focus and exposure are locked (focus lock). The shutter speed and aperture value are displayed (only when the mode dial is set to h, P or h). Now press the shutter button all the way (completely) to shoot a picture. Locking the focus and then composing the shot (focus lock) Compose your picture with the focus locked, and then fully press the shutter button to shoot a picture. • If the AF target mark blinks red, the focus is not adjusted properly. Try locking the focus again. Recording movies Set the mode dial to n and lightly press the shutter button to lock the focus. Then, press the shutter button completely to start recording. Press the shutter button again to stop recording. o button Turning the camera on and off Power on: Camera turns on in shooting mode. • Lens extends • Monitor turns on Shutter button Shooting pictures/Recording movies 8M 8M P 4 IN NORM NORM 3 1 2 4 c d 5 9 0 a b 7 8 e Shooting mode Self-timer Flash mode Macro mode/ Super macro mode Number of storable still pictures 6 1 2 1/1000 1/1000 F3.5 F3.5 P AF target mark

This function is used to set the camera to turn on in shooting mode when K is pressed with the camera off. g “K/q Turning on the camera with the K or q button” (P. 28) The last picture taken is displayed. • Press the arrow pad to view other pictures. • Use the zoom lever to switch between close-up playback and index display. This function is used to set the camera to turn on in playback mode when q is pressed with the camera off. g “K/q Turning on the camera with the K or q button” (P. 28) Playing back movies Select the movie in the playback mode and press  to play. Operations during movie playback • Press  to pause the playback. Operations during pause • To resume the movie, press . • To cancel the playback of the movie in the middle of it or during pause, press m. K button (Shooting) Selecting shooting mode/Turning the camera on q button (Playback) Selecting playback mode/Turning the camera on 3 4 2008.08.26 2008.08.26 12:30 12:30 100-0004 100-0004 4 IN MOVIE PLAY OK 2008.08.26 2008.08.26 12:30 12:30 100-0004 100-0004 00:12 /00:34 00:12 /00:34 IN O: Increases the volume. N: Reduces the volume. Y: Fast forwards playback when pressed and held. X: Rewinds playback when pressed and held. Playing time/Total recording time 2008.08.26 2008.08.26 12:30 12:30 100-0004 100-0004 00:14 /00:34 00:14 /00:34 IN O: Displays the first frame. N: Displays the last frame. Y: Plays when pressed and held. X: Plays the movie in reverse when pressed and held.

The camera determines the optimum settings for shooting pictures. [CAMERA MENU] settings such as ISO sensitivity cannot be changed. The camera automatically sets the optimum aperture value and shutter speed for the brightness of the subject. [CAMERA MENU] settings such as ISO sensitivity can be changed. This function reduces the blur incurred by a moving subject or camera shake when taking pictures. Use PORTRAIT and LANDSCAPE to shoot pictures with the optimal settings. Select from 11 available scene modes, according to the shooting conditions. Press  to set. • The scene selection screen displays sample images and the shooting mode to best suit the situation. • To switch to a different scene mode after a scene mode has been selected, press m to select [SCENE] from the top menu and display the scene selection screen. • By switching to another scene, most settings will be changed to the default settings of each scene. Follow the shooting guide displayed on the screen to set the target items. • Press m to display the shooting guide again. • To change the setting without using the shooting guide, set the shooting mode to another one. • The content set using the shooting guide will change to the default setting by pressing m or changing the mode using the mode dial. Mode dial Switching shooting modes h Shooting pictures with automatic settings P Set the optimum aperture value and shutter speed h Shooting pictures using digital image stabilization B E Shooting pictures according to the situation f Shooting pictures by selecting a scene mode according to the situation M NIGHT+PORTRAIT /j SPORT /N INDOOR /W CANDLE / R SELF PORTRAIT /S SUNSET /X FIREWORKS /P BEHIND GLASS / V CUISINE /d DOCUMENTS /i AUCTION R Follow the shooting guide 5 NIGHT+PORTRAIT SET OK MENU EXIT 1 2 3 4 5 OK SET BACK MENU SHOOTING GUIDE Brightening subject. Shooting into backlight. Set particular lighting. Blurring background. Adjusting area in focus.

• During audio recording, only the digital zoom can be used. To record the movie with the optical zoom, set [R] (movie) to [OFF]. g “R (movie) Recording movies with or without sound” (P. 22) Press g to change the display in the following order. * This is not displayed when the mode dial is set to n or R. With a menu item highlighted, press and hold down E to display the menu guide which will provide more information on the function or setting. n Recording movies g/E button Changing the information on display/Display the menu guide g Changing the information displays E Displaying the menu guide 00:34 00:34 REC REC This icon lights during movie recording. The remaining recording time is displayed. When the remaining recording time reaches 0, recording stops. 6 2008.08.26 2008.08.26 12:30 12:30 4 100-0004 100-0004 IN 8M 8M NORM NORM 8M 8M 2008.08.26 2008.08.26 12:30 12:30 4 100-0004 100-0004 +2.0 +2.0 F3.5 1/1000 F3.5 1/1000 IN ISO400 ISO400 NORM NORM +2.0 +2.0 4 IN 8M 8M P NORM NORM ISO 400 ISO 400 8M 8M +2.0 +2.0 P 4 IN NORM NORM ISO 400 ISO 400 Frame assist* Simple display* Normal display Shooting mode Normal display Detailed display Playback mode No information display W Sets the language for menus and error messages.

Displays the Function Menu which contains the functions and settings used during shooting. This button is also used to confirm your selection. The functions you can set with the Function Menu g “WB Adjusting the color of a picture” (P. 21) “ISO Changing the ISO sensitivity” (P. 22) “IMAGE QUALITY Changing the image quality” (P. 20) Shooting mode: Changing picture brightness Playback mode: Printing pictures Display a picture to print out in playback mode, connect the camera to the printer, and then press OF/< to print the picture. g “Direct printing (PictBridge)” (P. 30) Press X& in shooting mode to select the macro mode. Press  to set. • Zoom and flash cannot be used in super macro mode. Arrow pad (ONXY)  button (OK/FUNC) OF/< button Changing picture brightness (Exposure compensation)/ Printing pictures X& button Shooting pictures close to the subject (Macro mode) OFF Macro off Cancels macro mode. & Macro mode This mode lets you shoot from as close as 10 cm/3.9 in. (when the zoom is set for the zoom-out angle) and as close as 60 cm/ 23.6 in. (when the zoom is set for the zoom-in angle) to your subject. % Super macro mode This mode lets you shoot from as close as 3 cm/1.2 in. to your subject. The zoom position is fixed automatically and cannot be changed. 7 8 8M 8M 8M 8M 3264 3264 2448 2448 PICS LEFT PICS LEFT 4 ISO AUTO ISO AUTO WB AUTO WB AUTO 5M 3M 2M FINE FINE P XY: Select a setting, and press . The current camera settings are displayed. ON: Select the function to be set. Function Menu 9 0.0 0.0 +0.3 +0.3 +0.7 +0.7 +1.0 +1.0 F Use XY to change the display. Press OF/< in shooting mode, use the arrow pad to select preferred brightness, and press . • Adjustable from -2.0 EV to +2.0 EV 0

Press  to set. • After setting the self-timer, press the shutter button completely. Then, the self-timer lamp lights for approximately 10 seconds, blinks for approximately 2 seconds, and the shutter is released. • To cancel the self-timer, press NY. • Self-timer shooting is automatically canceled after one shot. Press Y# in shooting mode to select the flash mode. Press  to set. Displays the top menu. The monitor lights brighter when  is pressed in shooting mode. If there is no operation for 10 seconds, it dims back to the original brightness. • When [BRIGHT] is selected in [s], the monitor brightness does not change. In playback mode, select the picture you want to erase, and press S. • Once erased, pictures cannot be restored. Check each picture before erasing to avoid accidentally erasing pictures you want to keep. g “0 Protecting pictures” (P. 25) NY button Self-timer shooting OFF Cancel the self-timer. ON Set the self-timer. Y# button Flash shooting AUTO Flash auto The flash fires automatically in low light or backlight conditions. ! Red-eye reduction flash This emits pre-flashes for red-eye reduction. # Fill-in flash The flash fires regardless of the available light. $ Flash off The flash does not fire. m button Displaying the top menu /S button Increasing the brightness of the monitor (Backlight boost)/ Erasing pictures  Increasing the brightness of the monitor (Backlight boost) S Erasing pictures a b c d

Optical zoom: 5× Digital zoom: 4× (optical zoom × digital zoom: Max. 20×) Playback mode: Switching the picture display Zoom lever Zooming while shooting/Close-up playback e Zoom out: Turn the zoom lever to the W- side. Zoom in: Turn the zoom lever to the T- side. The zoom bar appears white when the current zoom position is within the optical zoom area. When the digital zoom activates, the zoom bar appears yellow and the image is further enlarged. Zoom bar W T P 4 IN 8M 8M NORM NORM W T P 4 IN 8M 8M NORM NORM 2008.08.26 2008.08.26 12:30 12:30 10 10 x 4 IN 4 IN 2008.08.26 2008.08.26 12:30 12:30 100-0004 100-0004 8M 8M NORM NORM 2008.08.26 2008.08.26 12:30 12:30 4 IN 2008.08.26 2008.08.26 12:30 12:30 4 IN 2008.08.26 2008.08.26 4 IN 12:30 12:30 Close-up playback • Turn and hold the zoom lever to the T-side to incrementally zoom in (up to 10 times the original size), and to the W-side to zoom out. • Press the arrow pad during close- up playback to scroll the picture in the indicated direction. • When returning to the single- frame playback, press . Index display • Use the arrow pad to select a picture for playback, and press  to play back the single-frame of the picture selected. Single-frame playback • Use the arrow pad to browse pictures. W T W W T W T W T T

• The contents displayed on the top menu differ according to the mode. • Select [CAMERA MENU], [PLAYBACK MENU], [EDIT], [ERASE] or [SETUP] and press . The screen for selecting the menu item is then displayed. • When the mode dial is set to R and the settings are made by following the shooting guide, press m to display the shooting guide screen. During menu operations, the buttons and their respective functions are displayed at the bottom of the screen. Follow these guides to navigate the menus. About the menus Operation guide m button  Arrow pad (ONXY) K button (Shooting mode) q button (Playback mode) MENU IMAGE QUALITY IMAGE QUALITY CAMERA MENU CAMERA MENU CAMERA MENU CAMERA MENU SETUP SETUP SETUP SETUP RESET RESET SCENE SCENE SCENE SCENE SILENT MODE SILENT MODE SILENT MODE SILENT MODE SET OK EXIT ISO OFF CAMERA MENU SET OK AUTO OFF PANORAMA FACE DETECT R AUTO WB MENU EXIT Top menu (Still picture shooting mode) CAMERA MENU items MENU IMAGE QUALITY IMAGE QUALITY CAMERA MENU CAMERA MENU CAMERA MENU CAMERA MENU SETUP SETUP SETUP SETUP RESET RESET SCENE SCENE SCENE SCENE SILENT MODE SILENT MODE SILENT MODE SILENT MODE SET OK EXIT Operation guide m button  : Moves back one menu. : Exits the menu. : Sets the selected item. MENU BACK MENU EXIT OK SET

1 Set the mode dial to a setting other than R. 2 Press m to display the top menu. Press Y to select [SETUP], and press . • [POWER SAVE] is on a menu in [SETUP]. 3 Press ON to select [POWER SAVE], and press . • Unavailable settings cannot be selected. • Press X on this screen to move the cursor to the page display. Press ON to change the page. To return to the item selection screen, press Y or . 4 Press ON to select [OFF] or [ON], and press . • The menu item is set and the previous menu is displayed. Press m repeatedly to exit the menu. • To cancel any changes and continue operating the menus, press m without pressing . Using the menus MENU SET OK EXIT IMAGE QUALITY IMAGE QUALITY CAMERA MENU CAMERA MENU CAMERA MENU CAMERA MENU SETUP SETUP SETUP SETUP RESET RESET SCENE SCENE SCENE SCENE SILENT MODE SILENT MODE SILENT MODE SILENT MODE BACKUP NO SETUP SET OK ENGLISH PIXEL MAPPING K/q W MEMORY FORMAT MENU EXIT 1 2 3 SETUP EXIT MENU SET OK POWER SAVE OFF 1 3 2 The selected item is displayed in a different color. Page display: This mark is displayed when there are more menu items on the next page. OK SET BACK MENU SETUP POWER MODE OFF 1 3 2 POWER SAVE ON OFF

g “Functions available in shooting modes and scenes” (P. 46) g “SETUP menus” (P. 27) • The factory default settings are displayed in gray ( ). This function allows you to set [IMAGE SIZE] and [COMPRESSION]. Still picture image quality and their applications Movie image quality g “Number of storable still pictures and recording length of movies” (P. 42) Shooting mode menu K IMAGE QUALITY Changing the image quality IMAGE SIZE Application G 3264 × 2448 • Suitable for printing pictures over A3 (11 × 17 in.). H 2560 × 1920 • Suitable for printing pictures at A4 (8.5 × 11 in.). I 2048 × 1536 • Suitable for printing pictures up to A4 (8 × 11 in.). J 1600 × 1200 • Suitable for printing pictures at A5 (5 × 7 in.). K 1280 × 960 • Suitable for printing pictures at postcard size. C 0640 × 480 • Suitable for viewing pictures on a TV or using pictures on emails and web sites. D 1920 × 1080 • Suitable for playing pictures at Wide screen TV. COMPRESSION L FINE • Shooting at high quality. M NORMAL • Shooting at normal quality. IMAGE SIZE C 640 × 480 E 320 × 240 2 * An Olympus xD-Picture Card is required. 4 3 1 5 4 CAMERA MENU MENU IMAGE QUALITY IMAGE QUALITY CAMERA MENU CAMERA MENU CAMERA MENU CAMERA MENU SETUP SETUP SETUP SETUP RESET RESET SCENE SCENE SCENE SCENE SILENT MODE SILENT MODE SILENT MODE SILENT MODE SET OK EXIT WB ISO R (still picture) R (movie) PANORAMA* FACE DETECT 1

The scene selection screen displays sample images and the shooting mode to best suit the situation. This can be set only when the mode dial is set to f. • By switching to another scene, most settings will be changed to the default settings of each scene. g “f Shooting pictures by selecting a scene mode according to the situation” (P. 13) RESET Changing the shooting functions back to default settings NO /YES Restore shooting functions back to default settings. Function Factory default setting Ref. Page f M NIGHT+PORTRAIT P. 13 g Normal display P. 14 F 0.0 P. 15 & OFF P. 15 Y OFF P. 16 # AUTO P. 16 IMAGE SIZE (Still picture/ Movie) G / E P. 20 COMPRESSION M P. 20 WB AUTO P. 21 ISO AUTO P. 22 R (still picture) OFF P. 22 R (movie) ON P. 22 FACE DETECT OFF P. 23 f (Scene) Shooting pictures by selecting a scene according to the situation CAMERA MENU WB ............................................................................................Adjusting the color of a picture AUTO The white balance is adjusted automatically for natural color, regardless of the light source. 5 Sunny day For shooting under a clear sky. 3 Cloudy day For shooting under a cloudy sky. 1 Tungsten light For shooting under tungsten lighting. w Fluorescent lamp 1 For shooting under daylight fluorescent lamp. (This type of lamp is mainly used in homes.) x Fluorescent lamp 2 For shooting under a neutral white fluorescent lamp. (This type of lamp is mainly used in desk lamps.) y Fluorescent lamp 3 For shooting under a white fluorescent lamp. (This type of lamp is mainly used in offices.) 2 3 4

audio after the picture is taken. When recording, aim the camera microphone at the source of the sound you want to record. Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master software on the provided CD-ROM. An Olympus xD-Picture Card is required for panorama shooting. Use the arrow pad to specify at which edge you want to connect the pictures; and then compose your shots so that the edges of the pictures overlap. The part of the previous picture where it will be joined to the next picture does not remain in the frame. You have to remember what the part in the frame looked like and take the next picture so it overlaps. • Press  to exit. • Panorama shooting is possible for up to 10 pictures. The warning mark (g) is displayed after 10 pictures have been taken. ISO.................................................................................................. Changing the ISO sensitivity AUTO Sensitivity is automatically adjusted according to the conditions of the subject. 64/100/200/400/ 640 A low value lowers the sensitivity for daylight shooting of clear, sharp pictures. The higher the value, the better the camera’s light sensitivity and ability to shoot with a fast shutter speed and in low light conditions. However, high sensitivity introduces noise into the resulting picture, which may give it a grainy appearance. R (still picture) ............................................................... Recording sound with still pictures OFF /ON R (movie)................................................................ Recording movies with or without sound OFF /ON When [ON] (sound is recorded) is selected, the optical zoom cannot be used during movie recording. Only the digital zoom can be used. PANORAMA............................................................................... Creating a panoramic picture Microphone Connects pictures from left to right Connects pictures from bottom to top Y: The next picture is connected at the right edge. X: The next picture is connected at the left edge. O: The next picture is connected at the top. N: The next picture is connected at the bottom.

• A face may not be detected depending on the subject. g “SETUP menus” (P. 27) g “SILENT MODE Muting operational sounds” (P. 23) • The factory default settings are displayed in gray ( ). Press  to start the slideshow. • Only the first frame of each movie is displayed. • To cancel the slideshow, press  or m. The recorded image is corrected and saved as a new one. • Movies, pictures shot by another camera, and previously fixed or edited pictures cannot be corrected. • When edited pictures are displayed, the picture cannot be re-edited. • Depending on the picture, the editing may not be effective. • Editing an image may cause it to suffer a minor loss in quality. FACE DETECT........................................................................................... Focusing on a face OFF /ON SILENT MODE Muting operational sounds OFF /ON This function allows you to mute operational sounds during shooting and playback (e.g. warning beeps, shutter sounds, etc.). Playback mode menu q SLIDESHOW Playing back pictures automatically PERFECT FIX Editing images 5 SLIDE- SHOW SLIDE- SHOW PRINT ORDER PRINT ORDER PLAYBACK MENU PLAYBACK MENU PLAYBACK MENU PLAYBACK MENU PERFECT FIX PERFECT FIX PERFECT FIX PERFECT FIX SETUP SETUP SETUP SETUP ERASE ERASE ERASE ERASE EDIT EDIT EDIT EDIT SILENT MODE SILENT MODE SILENT MODE SILENT MODE MY FAVORITE MY FAVORITE MY FAVORITE MY FAVORITE EXIT MENU SET OK 4*2 7 Q P 4 EDIT 5*1, *2 6 0 y R 6 PLAYBACK MENU 2*2 1*2 3*2 *1 A card is required. *2 This is not selected when the movie is selected. 1 2 PERFECT FIX SET OK LIGHTING FIX REDEYE FIX ALL MENU EXIT • Use ON to select the effect you want to apply, and press . • Use XY to display picture you want to edit and press . ALL Lighting fix and red-eye fix are activated together. LIGHTING FIX Edit only the portions that photographed dark when there is backlighting. REDEYE FIX Corrects a subject with red-eye.

Up to 9 pictures can be registered. • Registered pictures will not be erased even if the internal memory is formatted. g “Erasing pictures registered in MY FAVORITE” (P. 24) Note • Registered pictures cannot be edited, printed, copied to a card, transferred to a computer, or viewed on a computer. • Select [VIEW FAVORITE] to display pictures registered in MY FAVORITE. Use the arrow pad to browse pictures. • Press m to select [ADD FAVORITE] or [SLIDESHOW]. Erasing pictures registered in MY FAVORITE • Select a picture with XY, and press . This changes the image size of a picture and saves it as a new file. MY FAVORITE Viewing and registering pictures in My Favorite VIEW FAVORITE......................................................................... Viewing registered pictures ADD FAVORITE Adds pictures to My Favorite. • Select a picture with XY, and press . SLIDESHOW Plays back registered pictures automatically. • Press  to exit the slideshow. EXIT Reverts to normal playback mode. YES/ NO • Use the arrow pad to select the picture to be erased, and press S. Select [YES], and press . • Even if pictures registered in MY FAVORITE are erased, original pictures in the internal memory or the card may not be erased. SET................................................................................................. Registering favorite pictures EDIT Q .................................................................................................Changing the size of pictures C 640 × 480/ E 320 × 240 3 MENU SLIDE- SHOW SLIDE- SHOW SLIDE- SHOW SLIDE- SHOW ADD FAVORITE ADD FAVORITE ADD FAVORITE ADD FAVORITE EXIT EXIT EXIT EXIT SET OK EXIT My Favorite My Favorite My Favorite SET SET OK MENU BACK 4

• Use XY to select a picture to be cropped and press . • Use the arrow pad and zoom lever to adjust the position and size of the area-selection box, and press . This function allows you to save printing data (the number of prints and the date and time information) with the pictures stored on the card. g “Print settings (DPOF)” (P. 32) Select a picture with XY, and select [U +90°]/[V 0°]/[T -90°] with ON to rotate pictures. You can rotate several frames in succession. P.....................................................................................................................Cropping a picture PRINT ORDER Making print reservations (DPOF) PLAYBACK MENU 0.................................................................................................................. Protecting pictures OFF /ON Protected pictures cannot be erased using [ERASE], [SEL. IMAGE] or [ALL ERASE], but they are all erased by formatting. • Select the picture with XY, and protect it by selecting [ON] with ON. You can protect several frames in succession. When a picture is protected, 9 will be displayed on the monitor. y........................................................................................................................ Rotating pictures U +90° / V 0° / T -90° Pictures taken with the camera held vertically are displayed horizontally. This function lets you turn such pictures so that they are displayed vertically. New picture orientations are saved even when the power is turned off. OK W T SET 5 6 ON OFF OFF EXIT OK 0 EXIT OK y +90° EXIT OK y 0° -90° EXIT OK y

Once erased, pictures cannot be restored. Check each picture before erasing to avoid accidentally erasing pictures you want to keep. • When erasing pictures in the internal memory, do not insert the card into the camera. • When erasing pictures from the card, insert the card into the camera in advance. • You can confirm on the monitor whether the internal memory or card is being used. g “Using the internal memory or card” (P. 49) • Use the arrow pad to select the picture, and press  to mark R on your selection. • To cancel the selection, press  again. • When the selection is completed, press /S. • Select [YES], and press . • Select [YES], and press . R .................................................................................................... Adding sound to still pictures YES /NO Sound is recorded for about 4 seconds. • Use the arrow pad XY to select a picture, select [YES] with ON to begin recording, then press . • The [BUSY] bar will be temporarily displayed. ERASE Erasing selected pictures/Erasing all pictures SEL. IMAGE................................................................. Erasing by selecting the single-frame ALL ERASE .........................Erasing all the pictures in the internal memory or on the card SET OK MENU BACK NO YES YES R 7 1 4 2 5 3 6 IN OK S BACK MENU GO SEL. IMAGE

). All existing data, including protected pictures, are erased when the internal memory or card is formatted (images registered to “My Favorite” are not erased). Make sure that you save or transfer important data to a computer before formatting. • Make sure there is no card inserted in the camera when formatting the internal memory. • Be sure that the card is inserted in the camera when formatting the card. • Before using non-Olympus cards or cards which have been formatted on a computer, you must format them with this camera. Insert the optional card into the camera. Copying data does not erase the picture in the internal memory. • It takes some time to back up data. Check that the battery is not empty before starting the copy. You can select a language for on-screen display. Available languages vary depending on the area where you purchased this camera. SETUP menus MEMORY FORMAT (FORMAT) ........................Formatting the internal memory or card BACKUP................................................Copying pictures in the internal memory to the card W ..............................................................................................Selecting a display language MENU SET OK EXIT IMAGE QUALITY IMAGE QUALITY CAMERA MENU CAMERA MENU CAMERA MENU CAMERA MENU SETUP SETUP SETUP SETUP RESET RESET SCENE SCENE SCENE SCENE SILENT MODE SILENT MODE SILENT MODE SILENT MODE MENU SET OK EXIT PLAYBACK MENU PLAYBACK MENU PLAYBACK MENU PLAYBACK MENU SETUP SETUP SETUP SETUP ERASE ERASE ERASE ERASE EDIT EDIT EDIT EDIT SILENT MODE SILENT MODE SILENT MODE SILENT MODE PRINT ORDER PRINT ORDER PRINT ORDER PRINT ORDER MY FAVORITE MY FAVORITE MY FAVORITE MY FAVORITE SLIDE- SHOW SLIDE- SHOW SLIDE- SHOW SLIDE- SHOW PERFECT FIX PERFECT FIX PERFECT FIX PERFECT FIX Playback mode Shooting mode MEMORY FORMAT (FORMAT*1) BACKUP*1 W PIXEL MAPPING*2 K/q MENU COLOR SOUND SETTINGS s X VIDEO OUT POWER SAVE SETUP *1 A card is required. *2 You cannot select this item in playback mode.

processing functions. It is not necessary to operate this function frequently. Approximately once a year is recommended. Wait at least one minute after taking or viewing pictures to allow the pixel mapping function to perform properly. If you turn the camera off during pixel mapping, start again. Select [PIXEL MAPPING]. When [START] is displayed, press . • Select [MY FAVORITE] and press Y to set a still picture registered in “My Favorite” as the background. g “SET Registering favorite pictures” (P. 24) You can set the following with [SOUND SETTINGS]. • Setting the volume of the button operation sound. (BEEP) • Selecting the volume of the shutter button. (SHUTTER SOUND) • Adjusting the volume of the camera warning sound. (8) • Adjusting the volume during playback. (q VOLUME) • You can set all the sounds muted at once by setting [SILENT MODE]. g “SILENT MODE Muting operational sounds” (P. 23) PIXEL MAPPING.................................................. Adjusting the image processing function K/q.........................................................Turning on the camera with the K or q button YES Pressing K turns on the camera and starts the camera in the shooting mode. Pressing q turns on the camera and starts the camera in the playback mode. NO The power is not turned on. To turn on the camera, press o. MENU COLOR ......................................... Setting the menu screen color and background NORMAL / COLOR1 / COLOR2 / COLOR3 / MY FAVORITE SOUND SETTINGS ......................................... Setting the sound output from the camera BEEP OFF (No sound) / LOW / HIGH SHUTTER SOUND OFF (No sound) / LOW / HIGH 8 OFF (No sound) / LOW / HIGH q VOLUME OFF (No sound) / 1 / 2 / 3 / 4 / 5 s .......................................................................................... Adjusting the monitor brightness BRIGHT/ NORMAL

are not set, the [X] screen is displayed each time the camera is turned on. To play back camera images on a TV, set the video output according to your TV’s video signal type. • TV video signal types differ by country/region. Check the video signal type before connecting the camera to the TV. NTSC: North America, Taiwan, Korea, Japan PAL: European countries, China Playing back pictures on a TV Turn off the camera and the TV before connecting. X......................................................................................................... Setting the date and time VIDEO OUT ...............................................................................Playing back pictures on a TV NTSC /PAL The factory default settings differ according to the region where the camera is sold. POWER SAVE...................................................Setting the camera to the power save mode OFF /ON When no operation has been performed for approximately 10 seconds while in shooting mode, the monitor automatically shuts off. Pressing the zoom lever or other buttons restores the camera from power save mode. X Y M Y M D D TIME 2008 08 26 12 30 MENU CANCEL Y-M-D Cancels the setting Hour Date formats (Y-M-D, M-D-Y, D-M-Y) Minute • The first two digits of [Y] are fixed. • The time is displayed in the 24- hour format. • To set the time precisely, with the cursor on either “Minute” or “Y/M/ D”, press  as the time signal strikes 00 seconds. Settings on the TV Turn the TV on and set it to video input mode. • For details of switching to video input, refer to your TV’s instruction manual. • Images and the information displayed on the screen may be cropped depending on the TV’s settings. Settings on the camera Turn the camera on and press q to select the playback mode. • The last picture taken is displayed on the TV. Use the arrow pad to select the picture you want to display. Connect to the TV’s video input (yellow) and audio input (white) terminals. AV cable (provided) Connector cover Multi-connector

directly. EASY PRINT................ Prints the picture displayed in the monitor by using the standard settings of your printer. CUSTOM PRINT.......... Prints with the various print settings available on your printer. • PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. To find out if your printer is compatible with PictBridge, refer to the printer’s instruction manual. • For printer’s standard settings, available printing modes, the setting items such as paper sizes, and printer’s specifications such as available types of paper, how to install the papers and ink cassettes, etc., refer to the printer’s instruction manual. 1 In playback mode, display the picture you want to print out on the monitor. 2 Turn the printer on and plug the USB cable provided with the camera into the multi-connector of the camera and the printer’s USB port. • The [EASY PRINT START] screen is displayed. 3 Press OF/<. • Printing starts. • When printing is finished, the picture selection screen is displayed. To print another picture, press XY to select a picture, and press OF/<. 4 Disconnect the USB cable. Direct printing (PictBridge) EASY PRINT Multi-connector USB cable Connector cover OK PC / CUSTOM PRINT EASY PRINT START

and then press . 2 Select [CUSTOM PRINT], and press . 3 Follow the operation guide to adjust print settings. • If the [PRINTPAPER] screen is not displayed, [SIZE], [BORDERLESS] and [PICS/SHEET] are set to the default. Press XY to select the picture you want to print. You can also use the zoom button and select a picture from the index display. Other print modes and print settings (CUSTOM PRINT) Selecting a print mode Setting the print paper Selecting the picture to print EASY PRINT USB SET OK EXIT CUSTOM PRINT PC ALL PRINT PRINT MODE SELECT SET OK ALL INDEX PRINT ORDER MULTI PRINT PRINT EXIT MENU PRINT Prints the selected picture. ALL PRINT Prints all the pictures stored in the internal memory or the card. MULTI PRINT Prints one picture in multiple layout format. ALL INDEX Prints an index of all the pictures stored in the internal memory or the card. PRINT ORDER Prints the pictures according to the print reservation data on the card. g “Print settings (DPOF)” (P. 32) Operation guide STANDARD STANDARD PRINTPAPER SET OK MENU BACK SIZE BORDERLESS SIZE Choose from the available paper sizes on your printer. BORDERLESS Select with or without borders. In [MULTI PRINT] mode, you cannot print with a border. PICS/SHEET Select the number of pictures to be laid out on a sheet of paper. Available in [MULTI PRINT] mode only. 100-0004 100-0004 OK 4 IN SINGLEPRINT MORE PRINT PRINT Prints one copy of the selected picture. When [SINGLE PRINT] or [MORE] has been selected, a single copy or more copies are printed. SINGLE PRINT Makes a print reservation for the displayed picture. MORE Sets the number of prints and data to be printed for the displayed picture.

• Printing starts. • When [OPTION SET] is selected in [ALL PRINT] mode, [PRINT INFO] screen is displayed. • When printing is finished, the [PRINT MODE SELECT] screen is displayed. To cancel printing 5 In the [PRINT MODE SELECT] screen, press m. • A message is displayed. 6 Disconnect the USB cable. Print reservation allows you to save printing data (the number of prints and the date and time information) with the pictures stored on the card. With print reservations, you can print out pictures easily either at home using a personal DPOF-compatible printer or at a photo store that supports DPOF. DPOF is a standard format used to record automatic print information from digital cameras. • Only the images stored on the card can be reserved to print. Insert a card with recorded pictures into the camera before making print reservations. • DPOF reservations set by another device cannot be changed by this camera. Make changes using the original device. If a card contains DPOF reservations set by another device, entering reservations using this camera may overwrite the previous reservations. • You can make DPOF print reservations for up to 999 images per card. • Not all functions may be available on all printers, or at all photo stores. Setting the number of prints and data to be printed Print settings (DPOF) 1 PRINT INFO SET OK DATE FILE NAME

2 Select [<] or [U], and press . < Makes a print reservation for the selected picture. U Makes print reservations for all the pictures stored on the card. • When [U] is selected, go to step 5. When [<] is selected 3 Press XY to select the frames for print reservations, and then press ON to set the number of prints. • You cannot make print reservations for pictures with A. • Repeat Step 3 to make print reservations for other pictures. Cropping a picture • Use zoom lever to display the trimming frame. • Use the arrow pad and zoom lever to adjust the position and the size of area-selection box then press . 4 When you finish making print reservations, press . 5 Select the date and time setting, and press . NO The pictures are printed without the date and time. DATE The selected pictures are printed with the shooting date. TIME The selected pictures are printed with the shooting time. 6 Select [SET], and press . You can reset all the print reservation data or just for selected pictures. 1 Select top menu [PRINT ORDER], and press . To reset the print reservation data for all the pictures 2 Select [<] or [U], and press . 3 Select [RESET], and press . Making a print reservation Resetting print reservation data PRINT ORDER SET OK < U EXIT MENU Operation guide x 8M 8M 2008.08.26 2008.08.26 12:30 12:30 100-0004 100-0004 4 SET OK 0 T W NORM NORM SET OK MENU BACK DATE TIME NO X OK SET BACK MENU PRINT ORDER SET CANCEL 1 ( 1) OK SET BACK MENU PRINT ORDER SETTING PRINT ORDERED RESET KEEP

2 Select [<], and press . 3 Select [KEEP], and press . 4 Press XY to select the picture with the print reservations you want to cancel, and press N to decrease the number of prints to 0. • Repeat Step 4 to cancel print reservations for other pictures. 5 When you are finished canceling print reservations, press . 6 Select the date and time setting, and press . • The setting is applied to the remaining pictures with print reservations. 7 Select [SET], and press .

EN 35 Using OLYMPUS Master Using the USB cable provided with your camera, you can connect the camera and computer and download (transfer) the images to your computer using the OLYMPUS Master software, also provided with the camera. What is OLYMPUS Master? OLYMPUS Master is a software application for managing your digital images on your computer. Before installing the OLYMPUS Master software, please confirm that your computer is compatible with the following system requirements. For newer operating systems, please refer to the Olympus web site as shown on the back cover of this manual. Operating environment Install the OLYMPUS Master software Windows Macintosh OS Windows 2000 Professional/XP Home Edition/XP Professional/Vista Mac OS X v10.3 or later CPU Pentium III 500 MHz or later Power PC G3 500 MHz or later Intel Core Solo/Duo 1.5 GHz or later RAM 256 MB or more 256 MB or more Hard disk capacity 500 MB or more 500 MB or more Monitor 1,024 × 768 pixels or more 65,536 colors or more (16.77 million colors or more recommended) 1,024 × 768 pixels or more 32,000 colors or more (16.77 million colors or more recommended) Other USB port or IEEE 1394 port Internet Explorer 6 or later QuickTime 7 or later recommended DirectX 9 or later recommended USB port or IEEE 1394 port (FireWire) Safari 1.0 or later (1.3 or later recommended) QuickTime 6 or later Prepare the following items before starting. OLYMPUS Master 2 CD-ROM USB cable A computer that satisfies the operating environment (P. 35) requirements

36 EN Note • Use a computer with a pre-installed operating system. Operations are not guaranteed on home-built computers or computers with an updated operating system. • Operations are not guaranteed when using an added USB or IEEE 1394 (FireWire) port. • To install the software, you must log on as a user with administrators’ privileges. • If you are using Macintosh, be sure to remove the media (drag & drop onto the trash icon) before performing the following operations. Failure to do so could result in unstable computer operation and the need to reboot. • Disconnect the cable connecting the camera to the computer • Turn off the camera • Open the camera’s battery/card compartment cover 1 Make sure the camera is turned off. • The monitor is off. • The lens is retracted. 2 Connect the multi-connector on the camera to the USB port on the computer using the provided USB cable. • Refer to your computer’s instruction manual to locate the position of the USB port. • The camera turns on automatically. • The monitor turns on and the selection screen for the USB connection is displayed. 3 Select [PC], and press . Connecting the camera to a computer For how to install the OLYMPUS Master software, refer to the installation guide included in the CD-ROM. Monitor Multi-connector Connector cover EASY PRINT USB SET OK EXIT CUSTOM PRINT PC

EN 37 4 The camera is recognized by the computer. • Windows When you connect the camera to your computer for the first time, the computer attempts to recognize the camera. Click “OK” to exit the message that is displayed. The camera is recognized as a “Removable Disk”. • Macintosh The iPhoto program is the default application for managing digital images. When you connect your digital camera for the first time, the iPhoto application starts automatically, so close this application and start OLYMPUS Master. Note • The camera functions are disabled while the camera is connected to a computer. • Connecting the camera to a computer via a USB hub may cause unstable operation. In this case, do not use a hub, but connect the camera directly to the computer. • Images cannot be transferred to your computer with OLYMPUS Master if [PC] is selected in Step 3, Y is pressed and [MTP] is selected. Windows 1 Double-click the “OLYMPUS Master 2” icon on the desktop. Macintosh 1 Double-click the “OLYMPUS Master 2” icon in the “OLYMPUS Master 2” folder. • The browse window is displayed. • When OLYMPUS Master is started up for the first time after installation, the OLYMPUS Master initial setting screen and user registration screen are displayed before the browse window. Follow the on-screen instructions. 1 Click “Transfer Images” on the browse window, and then click “From Camera” . • The window for selecting the pictures you want to transfer from the camera is displayed. All the images in the camera are displayed. 2 Select “New Album” and enter an album name. 3 Select the image files and click “Transfer Images”. • A window indicating that the download is complete is displayed. 4 Click “Browse images now”. • The downloaded images are displayed in the browse window. Start up the OLYMPUS Master software Displaying camera images on a computer Downloading and saving images

38 EN To disconnect the camera 1 Make sure that the card access lamp has stopped blinking. 2 Make the following preparations for disconnecting the USB cable. Windows 1 Click the “Unplug or Eject Hardware” icon in the system tray. 2 Click the message that is displayed. 3 When a message is displayed saying that the hardware can be ejected safely, click “OK”. Macintosh 1 The trash icon changes to the eject icon when the “Untitled” or “NO_NAME” icon on the desktop is dragged. Drag and drop it on the eject icon. 3 Disconnect the USB cable from the camera. Note • Windows: When you click “Unplug or Eject Hardware”, a warning message may be displayed. Make sure that image data is not being downloaded from the camera and that all applications are closed. Click the “Unplug or Eject Hardware” icon again and disconnect the cable. This camera is compatible with USB mass storage. You can connect the camera to your computer using the USB cable provided with the camera to download and save images without using OLYMPUS Master. The following environment is required to use the USB cable to connect the camera to your computer. Windows: Windows 2000 Professional/XP Home Edition/XP Professional/Vista Macintosh: Mac OS X v10.3 or later Note • If your computer is running Windows Vista, you can select [PC] in Step 3 on P. 36, press Y, and select [MTP] to use Windows Photo Gallery. • Data transfer is not guaranteed in the following environments, even if your computer is equipped with a USB port. • Computers with a USB port added by means of an extension card, etc. • Computers without a factory-installed OS and home-built computers To download and save images to a computer without using OLYMPUS Master Card access lamp For detailed operations of OLYMPUS Master, refer to the quick start guide displayed upon startup or the help of the OLYMPUS Master.

EN 39 Getting to know your camera better The battery is not charged • Charge the battery with the charger. The battery is temporarily unable to function because of the cold • Battery performance declines in low temperatures, and the charge may not be sufficient to turn on the camera. Remove the battery and warm it by putting it in your pocket for a while. Sometimes when the contact area of the card is dirty, the camera cannot recognize the card, and the [CARD SETUP] screen will be displayed. In this case, select [CLEAN CARD] and after pressing , take out the card, and wipe the contact area with a soft, dry cloth. The camera is in sleep mode • To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom lever or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. Press o to turn the camera on. The mode dial is in the position of R • No pictures can be taken when the shooting guide is being displayed. Take pictures after selecting the settings by following the shooting guide, or turn the mode dial and set it to a shooting mode other than R. The flash is charging • Wait until the # (flash charge) mark stops blinking before taking the picture. The camera has been used in the same condition from the time of purchase • No date and time have been set in the camera at the time of purchase. Set the date and time before using the camera. g “Set the date and time” (P. 7), “X Setting the date and time” (P. 29) The battery has been removed from the camera • The date and time settings will be returned to the factory default settings if the camera is left without the battery for approximately 1 day. If the battery is in the camera for a short period of time, the date and time setting will be reset earlier than this. Before taking important pictures, check that the date and time settings are correct. Shooting tips and information Tips before you start taking pictures The camera does not turn on even when a battery is loaded The card cannot be used No picture is taken when the shutter button is pressed The date and time have not been set

40 EN There are several ways to focus, depending on the subject. When the subject is not in the center of the frame • Place the subject in the center of the frame, lock the focus on the subject, and then recompose your picture. g “Shutter button Shooting pictures/Recording movies” (P. 11) The subject is moving quickly • Focus the camera on a point roughly the same distance away as the subject you want to shoot (by pressing the shutter button halfway); and then recompose your picture and wait for the subject to enter the frame. • Under certain types of conditions, it is difficult to focus using auto focus. In these cases, focus (focus lock) on an object with high contrast at the same distance as the intended subject, recompose your shot and then take the picture. If the subject has no vertical lines, hold the camera vertically and focus the camera using the focus lock function by pressing the shutter button halfway, and then return the camera to the horizontal position while keeping the button pressed halfway and take the picture. Hold the camera correctly and press the shutter button gently to shoot the picture. In addition, blurring is reduced when taking pictures in the h mode. g “h Shooting pictures using digital image stabilization” (P. 13) The factors that can cause the picture to blur are as follows: • When you zoom at a high magnification to shoot the picture • When the shutter speed is set low to shoot a dark subject • When the flash cannot be used or a low shutter speed set f mode is selected. The flash fires automatically when insufficient light is available and may cause your image to be blurry. When taking pictures in low lights without the flash, set the flash mode to [$] (flash off), then increase the ISO sensitivity. g “Y# button Flash shooting” (P. 16) Increase the [ISO] setting g “ISO Changing the ISO sensitivity” (P. 22) Shooting tips Focusing on the subject Subjects that are difficult to focus on Taking pictures without blurring Taking blur-free pictures without the flash Subject with low contrast Subject with an extremely bright area in the center of the frame Subject without vertical lines Subjects at different distances Fast-moving subject The subject is not in the center of the frame

EN 41 There are several factors that can cause the picture to appear grainy. Using the digital zoom to take close-up pictures • With the digital zoom, part of the image is cropped and enlarged. The greater the magnification, the grainier the picture appears. g “Zoom lever Zooming while shooting/Close-up playback” (P. 17) Increasing the ISO sensitivity • When you increase the [ISO] setting, “noise”, which appears as spots of unwanted color or unevenness in the color, can be introduced and give the picture a grainy appearance. This camera is equipped with a function to allow shooting at high sensitivity while suppressing noise; however, increasing the ISO sensitivity can result in some noise, depending on the shooting conditions. g “ISO Changing the ISO sensitivity” (P. 22) Taking pictures with the f mode set to M, W, S or X • When taking pictures of dark subjects using the above scene modes, the picture may appear grainy. g “f Shooting pictures by selecting a scene mode according to the situation” (P. 13) • The reason why there are sometimes differences between the actual colors and the colors recorded in a picture is related to the light source illuminating the subject. [WB] is the function that helps the camera determine the true colors. Normally, the [AUTO] setting provides the optimal white balance, but depending on the subject, results may be better if you manually adjust the [WB] setting. • When the subject is in the shade on a sunny day • When the subject is illuminated by both natural light and indoor lighting, such as when near a window • When there is no white in the center of the frame g “WB Adjusting the color of a picture” (P. 21) • Often, bright subjects (such as snow) turn out darker than their natural colors. Adjusting OF toward [+] makes the subject closer to their real shades. Conversely, when you are shooting dark subjects, it can be effective to adjust toward [–]. Sometimes, using the flash may not produce the brightness (exposure) that was intended. g “OF/< button Changing picture brightness (Exposure compensation)/ Printing pictures” (P. 15) • Set the flash to [#] (fill-in) to activate fill-in-flash. You can shoot a subject against backlight without the face of the subject appearing dark. [#] is effective not only for shooting against backlight, but also for shooting under fluorescent and other artificial lighting. g “Y# button Flash shooting” (P. 16) • Setting OF to [+] is effective when shooting against backlight. g “OF/< button Changing picture brightness (Exposure compensation)/ Printing pictures” (P. 15) • When [FACE DETECT] is set to [ON], faces in pictures appears bright, since adequate exposure for the detected face can be obtained even under backlight conditions. g “FACE DETECT Focusing on a face” (P. 23) The picture is too grainy Taking pictures with the correct color Taking pictures of a white beach or snow scene Taking pictures of a subject against backlight

42 EN There are two ways to record the pictures you take with this camera. Recording pictures to the internal memory • Pictures are recorded to the internal memory, and when the number of storable still pictures reaches 0, you connect the camera to a computer to download the pictures; and then erase the pictures from the internal memory. Using a card (xD-Picture Card) (optional) • Pictures are recorded to the card when inserted in the camera. When the card is full, you download the pictures to a computer and then either erase the pictures from the card or use a new card. • Pictures are not recorded to the internal memory when a card is inserted in the camera. Pictures in the internal memory can be copied to the card using the [BACKUP] function. g “BACKUP Copying pictures in the internal memory to the card” (P. 27) “The card” (P. 49) Number of storable still pictures and recording length of movies Still pictures Movies Additional shooting tips and information Increasing the number of pictures that can be taken IMAGE SIZE COMPRES- SION Number of storable still pictures Internal memory Using a 1GB card With sound Without sound With sound Without sound G 3264 × 2448 L 4 4 221 223 M 7 8 429 438 H 2560 × 1920 L 6 6 353 359 M 12 12 673 695 I 2048 × 1536 L 10 10 566 576 M 20 21 1,102 1,142 J 1600 × 1200 L 16 17 913 940 M 32 34 1,728 1,881 K 1280 × 960 L 25 26 1,390 1,453 M 47 53 2,558 2,907 C 640 × 480 L 84 107 4,568 5,814 M 148 197 7,995 10,660 D 1920 × 1080 L 15 16 841 876 M 30 32 1,640 1,728 IMAGE SIZE Continuous recording length Internal memory Using a 1 GB card With sound Without sound With sound Without sound C 640 × 480 21 sec. 22 sec. 17 min. 48 sec. 18 min. 11 sec. E 320 × 240 58 sec. 1 min. 1 sec. 29 min. 29 min.

EN 43 • If you use a non-Olympus card or a card used for another application, such as a computer, use the [FORMAT] function to format the card. g “MEMORY FORMAT (FORMAT) Formatting the internal memory or card” (P. 27) • An image or movie is being recorded or downloaded (when connected to a computer). • Do not do any of the following while the card access lamp is blinking. Doing so may prevent the image data from being saved and render the internal memory or card unusable. • Open the battery/card compartment cover • Remove the battery and card • Performing any of the following operations when not actually taking pictures can deplete the battery power. • Repeatedly pressing the shutter button halfway • Repeatedly using the zoom • To save battery power, set [POWER SAVE] to [ON], or turn off the camera whenever it is not in use. g “POWER SAVE Setting the camera to the power save mode” (P. 29) • Some items may not be selectable from the menus when using the arrow pad. (The menu items displayed in gray cannot be selected.) • Items that cannot be set with the current shooting mode • Items that cannot be set because of an item that has already been set: [%] and [#], etc. • Some functions cannot be used when there is no card in the camera. [PANORAMA], [PRINT ORDER], [FORMAT], [BACKUP] • When the mode dial is set to R, functions cannot be changed. • To return the changed shooting settings to default settings while shooting, set [RESET] to [YES]. g “RESET Changing the shooting functions back to default settings” (P. 21) • All shooting settings except for P mode, [IMAGE QUALITY] and the selected scene mode return to default settings when the camera is turned off. • Depending on the picture, the red-eye may not be fixed. Also, parts except the eye may be fixed. • Light reflecting from dust and other particles in the air at night may appear as bright specks in pictures taken using the flash. Using a new card The card access lamp is blinking Extending the useful life of the battery Functions that cannot be selected from menus/Functions that cannot be selected even by pressing the function buttons To return the settings of functions to default settings Playback help and troubleshooting tips The red-eye cannot be fixed Bright specks appear in the picture

44 EN • When a card has been inserted in the camera, the pictures in the internal memory cannot be played back. Pull out the card before operating the camera. • Play back a picture, and press g/E. Press g/E repeatedly to change the amount of information displayed. g “g/E button Changing the information on display/Display the menu guide” (P. 14) • Turn the zoom lever to the W-side to display the pictures as thumbnails (index display). g “Zoom lever Zooming while shooting/Close-up playback” (P. 17) • Once sound is added to a picture, it is not possible to erase the sound. In this case, make a re-recording with silence. g “R Adding sound to still pictures” (P. 26) The size of the picture displayed on a computer screen changes depending on the computer settings. When the monitor setting is 1,024 × 768 and you are using Internet Explorer to view a picture with an image size of 2,048 × 1,536 at 100%; the entire picture cannot be viewed without scrolling. There are several ways you can view the entire picture on the computer screen. View the picture using image browsing software • Install the OLYMPUS Master 2 software from the provided CD-ROM. Change the monitor setting • The icons on the computer desktop may be rearranged. For details of changing the settings on your computer, refer to the computer’s instruction manual. Playback tips Playing back pictures in the internal memory Viewing picture information Quickly displaying a desired picture Erasing sound recorded to still pictures Viewing pictures on a computer Viewing the entire picture on a computer screen When you get an error message on the camera... Monitor indication Possible cause Corrective action q CARD ERROR There is a problem with the card. This card cannot be used. Insert a new card. q WRITE PROTECT Writing to the card is prohibited. The recorded image has been protected (read-only) on a computer. Download the image to a computer and cancel the read- only setting. > MEMORY FULL The internal memory has no available memory and cannot store any new data. Insert a card or erase unwanted data. Before erasing, backup the data of important pictures using the card or download such pictures to a computer.

EN 45 q CARD FULL The card has no available memory and cannot store any new data. Replace the card or erase unwanted data. Before erasing, download important pictures to a computer. L NO PICTURE There are no pictures in the internal memory or on the card. The internal memory or the card contains no pictures. Record pictures. r PICTURE ERROR There is a problem with the selected picture and it cannot be played back on this camera. Use image processing software to view the picture on a computer. If that cannot be done, the image file is damaged. r THE IMAGE CANNOT BE EDITED Pictures taken by other cameras, or previously edited or corrected pictures cannot be edited or fixed. Use image processing software to edit the pictures. CARD-COVER OPEN The battery/card compartment cover is open. Close the battery/card compartment cover. g BATTERY EMPTY The battery is empty. Charge the battery. The card is not being recognized by the camera. Or, the card is not formatted. • Select [CLEAN CARD], and press . Remove the card and wipe the contact area with a soft, dry cloth. • Select [FORMAT] [YES] and press . All data on the card is erased. There is an error in the internal memory. Select [MEMORY FORMAT] [YES] and press . All data in the internal memory is erased. NO CONNECTION The camera is not connected to the computer or the printer correctly. Disconnect the camera and connect it again correctly. NO PAPER There is no paper in the printer. Load some paper into the printer. NO INK The printer has run out of ink. Replace the ink cartridge in the printer. JAMMED The paper is jammed. Remove the jammed paper. SETTINGS CHANGED The printer’s paper tray has been removed or the printer has been operated while changing settings on the camera. Do not operate the printer while changing settings on the camera. PRINT ERROR There is a problem with the printer and/or camera. Turn off the camera and printer. Check the printer and remedy any problems before turning the power on again. r CANNOT PRINT Pictures recorded on other cameras may not be printed on this camera. Use a computer to print. Monitor indication Possible cause Corrective action OK SET CARD SETUP CLEAN CARD FORMAT IN OK SET MEMORY SETUP POWER OFF MEMORY FORMAT

46 EN Some functions cannot be set in certain shooting modes. For more details, refer to the table below. Functions available in shooting modes *1 Shooting mode is fixed at [&]. *2 [#] is fixed at [$]. *3 [IMAGE QUALITY] is fixed at [C]. Functions available in shooting modes and scenes Shooting mode h P h i l A f Ref. Page Function M C N V W P d R S X i F � � � � � � � � � � � � P. 15 & � � � – � – � � – – – –*1 P. 15 % � � � – � – � � – – – – P. 15 Y � � � � � � � � � � � � P. 16 # � � � � –*2 � � –*2 � –*2 –*2 –*2 P. 16 Zoom � � � � � � � � – � � � P. 17 IMAGE QUALITY � � � � � � � � � � � –*3 P. 20 WB – � � � � � � � � � � � P. 21 ISO – � – – – – – – – – – – P. 22 R (still picture) – � � � – � � � � � � – P. 22 R (movie) – – – – � – – – – – – – P. 22 PANORAMA – � � � – � � � � � � – P. 22 FACE DETECT – � � � – � � � � � – � P. 23

wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the camera at the beach, use a cloth soaked in clean water and wrung well. Monitor: • Wipe gently with a soft cloth. Lens: • Blow dust off the lens with a commercial blower, then wipe gently with a lens cleaner. Battery/Charger: • Wipe gently with a soft, dry cloth. Note • Do not use strong solvents such as benzene or alcohol, or chemically treated cloth. • Mold may form on the lens surface if the lens is left dirty. • When storing the camera for extended periods, remove the battery and card, and keep in a cool, dry place that is well ventilated. • Periodically, insert the battery and test the camera functions. Note • Avoid leaving the camera in places where chemical products are handled since this may result in corrosion. ( This camera uses one Olympus lithium ion battery (LI-42B/LI-40B). No other type of batteries can be used. ( Power consumption by the camera varies depending on which functions are used. ( During the conditions described below, power is consumed continuously and the battery becomes exhausted quickly. • The zoom is used repeatedly. • The shutter button is pressed halfway repeatedly in shooting mode, activating the auto focus. • A picture is displayed on the monitor for an extended period of time. • The camera is connected to a computer or printer. ( Using an exhausted battery may cause the camera to turn off without displaying the battery level warning. ( The rechargeable battery is not fully charged at the time of purchase. Charge the battery fully with the LI-40C charger before use. ( The provided rechargeable battery usually takes approximately 5 hours to charge. ( This camera uses a charger specified by Olympus. Do not use any other type of charger. ( The charger can be used in most home electrical sources within the range of 100 V to 240 V AC (50/60Hz) around the world. However, depending on the country or area you are in, the AC wall outlet may be shaped differently and the charger may require a plug adapter to match the wall outlet. For details, ask at your local electrical shop or travel agent. ( Do not use travel voltage converters as they could damage your charger. Camera care Cleaning the camera Storage Battery and charger Using your charger abroad

Depending on the area, different types of plugs and supply voltages are used. Attention: Power cord meeting demands from each country shall be used. - For only the United States Use a UL Listed, 1.8 - 3 m (6 - 10 ft), Type SPT-2 or NISPT-2, AWG no. 18 power supply cord, rated for 125 V 7 A, with a non-polarized NEMA 1-15P plug rated for 125 V 15 A". Representative plug of power supply cord of countries/regions around the world A Type (American Type) B Type (British Type) BF Type (British Type) B3 Type (British Type) C Type (CEE Type) SE Type (CEE Type) O Type (Oceania Type) Europe North America Countries/Regions Voltage Frequency (Hz) Plug type Countries/Regions Voltage Frequency (Hz) Plug type Austria 230 50 C Canada 120 60 A Belgium 230 50 C USA 120 60 A Czech 220 50 C Denmark 230 50 C Central America Finland 230 50 C Countries/Regions Voltage Frequency (Hz) Plug type France 230 50 C Bahamas 120/240 60 A Germany 230 50 C Costa Rica 110 60 A Greece 220 50 C Cuba 110/220 60 A/C Hungary 220 50 C Dominican (rep) 110 60 A Iceland 230 50 C El Salvador 110 60 A Ireland 230 50 C/BF Guatemala 120 60 A Italy 220 50 C Honduras 110 60 A Luxemburg 230 50 C Jamaica 110 50 A Netherlands 230 50 C Mexico 120/127 60 A Norway 230 50 C Nicaragua 120/240 60 A Poland 220 50 C Panama 110/220 60 A Portugal 230 50 C Romania 220 50 C South America Russia 220 50 C Countries/Regions Voltage Frequency (Hz) Plug type Slovak 220 50 C Argentina 220 50 C/BF/O Spain 127/230 50 C Brazil 127/220 60 A/C Sweden 230 50 C Chile 220 50 C Switzerland 230 50 C Colombia 120 60 A UK 240 50 BF Peru 220 60 A/C Venezuela 120 60 A Asia Countries/Regions Voltage Frequency (Hz) Plug type Middle East China 220 50 A Countries/Regions Voltage Frequency (Hz) Plug type Hong Kong 200/220 50 BF Iran 220 50 C/BF India 230/240 50 C Iraq 220 50 C/BF Indonesia 127/230 50 C Israel 230 50 C Japan 100 50/60 A Saudi Arabia 127/220 50 A/C/BF Korea (rep) 220 60 C Turkey 220 50 C Malaysia 240 50 BF UAE 240 50 C/BF Philippines 220/230 60 A/C Singapore 230 50 BF Africa Taiwan 110 60 A Countries/Regions Voltage Frequency (Hz) Plug type Thailand 220 50 C/BF Algeria 127/220 50 C Vietnam 220 50 A/C Congo (dem) 220 50 C Egypt 220 50 C Oceania Ethiopia 220 50 C Countries/Regions Voltage Frequency (Hz) Plug type Kenya 240 50 C/BF Australia 240 50 O Nigeria 230 50 C/BF New Zealand 230/240 50 O South Africa 220/230 50 C/BF Tanzania 230 50 C/BF Tunisia 220 50 C

The internal memory and card are the camera’s media for recording pictures, similar to film in a film camera. Pictures recorded to the internal memory or card can be easily erased on the camera or processed using a computer. Unlike portable storage media, the internal memory cannot be removed or exchanged. The number of recordable pictures can be increased by using a card with a larger capacity. 1 Index area You can use this space to write the contents of the card. 2 Contact area The part where the data transferred from the camera enters the card. Do not touch this area directly. Compatible cards xD-Picture Card (16MB – 2GB) (Type H/M, Standard) Using the internal memory or card You can confirm on the monitor whether the internal memory or card is being used during shooting and playback operations. Note • Do not open the battery/card compartment cover while the card access lamp is blinking, as the lamp is indicating that it is reading or writing data. Doing so may damage the data in the internal memory or the card and render the internal memory or card unusable. Useful use of the accessories The card 1 2 8M 8M 2008.08.26 2008.08.26 12:30 12:30 4 100-0004 100-0004 IN NORM NORM 8M 8M P 4 IN NORM NORM Shooting mode Playback mode Memory indicator B: When using the internal memory No icon: When using a card

manuals and documentation for future reference. Cleaning — Always unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this product. Attachments — For your safety, and to avoid damaging the product, use only accessories recommended by Olympus. Water and Moisture — For precautions on products with weatherproof designs, read the weatherproofing sections. Location — To avoid damage to the product, mount the product securely on a stable tripod, stand, or bracket. Power Source — Connect this product only to the power source described on the product label. Foreign Objects — To avoid personal injury, never insert a metal object into the product. Heat — Never use or store this product near any heat source such as a radiator, heat register, stove, or any type of equipment or appliance that generates heat, including stereo amplifiers. SAFETY PRECAUTIONS General Precautions CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL. An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product. DANGER If the product is used without observing the information given under this symbol, serious injury or death may result. WARNING If the product is used without observing the information given under this symbol, injury or death may result. CAUTION If the product is used without observing the information given under this symbol, minor personal injury, damage to the equipment, or loss of valuable data may result. WARNING! TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN

( Do not use the flash and LED on people (infants, small children, etc.) at close range. • You must be at least 1 m (3 ft.) away from the faces of your subjects. Firing the flash too close to the subject’s eyes could cause a momentary loss of vision. ( Keep young children and infants away from the camera. • Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury: • Becoming entangled in the camera strap, causing strangulation. • Accidentally swallowing the battery, cards or other small parts. • Accidentally firing the flash into their own eyes or those of another child. • Accidentally being injured by the moving parts of the camera. ( Do not look at the sun or strong lights with the camera. ( Do not use or store the camera in dusty or humid places. ( Do not cover the flash with a hand while firing. CAUTION ( Stop using the camera immediately if you notice any unusual odors, noise, or smoke around it. • Never remove the batteries with bare hands, which may cause a fire or burn your hands. ( Never hold or operate the camera with wet hands. ( Do not leave the camera in places where it may be subject to extremely high temperatures. • Doing so may cause parts to deteriorate and, in some circumstances, cause the camera to catch fire. Do not use the charger if it is covered (such as a blanket). This could cause overheating, resulting in fire. ( Handle the camera with care to avoid getting a low-temperature burn. • When the camera contains metal parts, overheating can result in a low-temperature burn. Pay attention to the following: • When used for a long period, the camera will get hot. If you hold on to the camera in this state, a low-temperature burn may be caused. • In places subject to extremely cold temperatures, the temperature of the camera’s body may be lower than the environmental temperature. If possible, wear gloves when handling the camera in cold temperatures. ( Be careful with the strap. • Be careful with the strap when you carry the camera. It could easily catch on stray objects - and cause serious damage. DANGER • The camera uses a lithium ion battery specified by Olympus. Charge the battery with the specified charger. Do not use any other chargers. • Never heat or incinerate batteries. • Take precautions when carrying or storing batteries to prevent them from coming into contact with any metal objects such as jewelry, pins, fasteners, etc. Handling the Camera Battery Handling Precautions Follow these important guidelines to prevent batteries from leaking, overheating, burning, exploding, or causing electrical shocks or burns.

temperatures in a hot vehicle, near a heat source, etc. • To prevent causing battery leaks or damaging their terminals, carefully follow all instructions regarding the use of batteries. Never attempt to disassemble a battery or modify it in any way, by soldering, etc. • If battery fluid gets into your eyes, flush your eyes immediately with clear, cold running water and seek medical attention immediately. • Always store batteries out of the reach of small children. If a child accidentally swallows a battery, seek medical attention immediately. WARNING • Keep batteries dry at all times. • To prevent batteries from leaking, overheating, or causing a fire or explosion, use only batteries recommended for use with this product. • Insert the battery carefully as described in the operating instructions. • If rechargeable batteries have not been recharged within the specified time, stop charging them and do not use them. • Do not use a battery if it is cracked or broken. • If a battery leaks, becomes discolored or deformed, or becomes abnormal in any other way during operation, stop using the camera. • If a battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean, running cold water immediately. If the fluid burns your skin, seek medical attention immediately. • Never subject batteries to strong shocks or continuous vibration. CAUTION • Before loading, always inspect the battery carefully for leaks, discoloration, warping, or any other abnormality. • The battery may become hot during prolonged use. To avoid minor burns, do not remove it immediately after using the camera. • Always unload the battery from the camera before storing the camera for a long period. • To protect the high-precision technology contained in this product, never leave the camera in the places listed below, no matter if in use or storage: • Places where temperatures and/or humidity are high or go through extreme changes. Direct sunlight, beaches, locked cars, or near other heat sources (stove, radiator, etc.) or humidifiers. • In sandy or dusty environments. • Near flammable items or explosives. • In wet places, such as bathrooms or in the rain. When using products with weatherproof designs, read their manuals as well. • In places prone to strong vibrations. • Never drop the camera or subject it to severe shocks or vibrations. • When mounted on a tripod, adjust the position of the camera with the tripod head. Do not twist the camera. • Do not touch electric contacts on cameras. • Do not leave the camera pointed directly at the sun. This may cause lens or shutter curtain damage, color failure, ghosting on the CCD, or may possibly cause fires. • Do not push or pull severely on the lens. • Before storing the camera for a long period, remove the battery. Select a cool, dry location for storage to prevent condensation or mold from forming inside the camera. After storage, test the camera by turning it on and pressing the shutter release button to make sure that it is operating normally. • Always observe the operating environment restrictions described in the camera’s manual. Caution for Usage Environment

For safe and proper use, read the battery’s instruction manual carefully before using it. • If the battery’s terminals get wet or greasy, camera contact failure may result. Wipe the battery well with a dry cloth before use. • Always charge a battery when using it for the first time, or if it has not been used for a long period. • When operating the camera with battery power at low temperatures, try to keep the camera and spare battery as warm as possible. A battery that has run down at low temperatures may be restored after it is warmed at room temperature. • The number of pictures you can take may vary depending on the shooting conditions or battery. • Before going on a long trip, and especially before traveling abroad, purchase extra batteries. A recommended battery may be difficult to obtain while traveling. • Please recycle batteries to help save our planet’s resources. When you throw away dead batteries, be sure to cover their terminals and always observe local laws and regulations. • Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback mode failure or damage to the LCD monitor. • A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction. • When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. This is not a malfunction; it will be less noticeable in playback mode. • In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color may change temporarily. When using the camera in extremely cold places, it is a good idea to occasionally place it in a warm place. An LCD monitor exhibiting poor performance due to low temperatures will recover in normal temperatures. • The LCD used for the monitor is made with high-precision technology. However, black spots or bright spots of light may appear constantly on the LCD monitor. Due to its characteristics or the angle at which you are viewing the monitor, the spot may not be uniform in color and brightness. This is not a malfunction. • Olympus makes no representations or warranties regarding any damages, or benefit expected by using this unit lawfully, or any request from a third person, which are caused by the inappropriate use of this product. • Olympus makes no representations or warranties regarding any damages or any benefit expected by using this unit lawfully which are caused by erasing picture data. • Olympus makes no representations or warranties, either expressed or implied, by or concerning any content of these written materials or software, and in no event shall be liable for any implied warranty of merchantability or fitness for any particular purpose or for any consequential, incidental or indirect damages (including but not limited to damages for loss of business profits, business interruption and loss of business information) arising from the use or inability to use these written materials or software or equipment. Some countries do not allow the exclusion or limitation of liability for consequential or incidental damages, so the above limitations may not apply to you. • Olympus reserves all rights to this manual. Battery Handling Precautions LCD Monitor Legal and Other Notices Disclaimer of Warranty

Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringe upon the rights of copyright owners. All rights reserved. No part of these written materials or this software may be reproduced or used in any form or by any means, electronic or mechanical, including photocopying and recording or the use of any type of information storage and retrieval system, without the prior written permission of Olympus. No liability is assumed with respect to the use of the information contained in these written materials or software, or for damages resulting from the use of the information contained therein. Olympus reserves the right to alter the features and contents of this publication or software without obligation or advance notice. • Radio and Television Interference • Changes or modifications not expressly approved by the manufacturer may void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. • This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. • However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Adjust or relocate the receiving antenna. - Increase the distance between the camera and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult your dealer or an experienced radio/TV technician for help. Only the OLYMPUS- supplied USB cable should be used to connect the camera to USB enabled personal computers (PC). Any unauthorized changes or modifications to this equipment would void the user’s authority to operate it. Warning Copyright Notice FCC Notice

We strongly recommend that you use only the genuine Olympus dedicated rechargeable battery and battery charger with this camera. Using a non-genuine rechargeable battery and/or battery charger may result in fire or personal injury due to leakage, heating, ignition or damage to the battery. Olympus does not assume any liability for accidents or damage that may result from the use of a battery and/ or battery charger that are not genuine Olympus accessories. OLYMPUS WORLDWIDE LIMITED WARRANTY - IMAGING PRODUCTS Olympus warrants that the enclosed Olympus® imaging product(s) and related Olympus® accessories (individually a “Product” and collectively the “Products”) will be free from defects in materials and workmanship under normal use and service for a period of one (1) year from the date of purchase. If any Product proves to be defective within the one-year warranty period, the customer must return the defective Product to any of Olympus Service Centers, following the procedure set forth below (See “WHAT TO DO WHEN SERVICE IS NEEDED”). Olympus, at its sole discretion, will repair, replace, or adjust the defective Product, provided that Olympus investigation and factory inspection disclose that (a) such defect developed under normal and proper use and (b) the Product is covered under this limited warranty. Repair, replacement, or adjustment of defective Products shall be Olympus’s sole obligation and the customer’s sole remedy hereunder. The customer is liable and shall pay for shipment of the Products to the Olympus Service Center. Olympus shall not be obligated to perform preventive maintenance, installation, deinstallation, or maintenance. Olympus reserves the right to (i) use reconditioned, refurbished, and/or serviceable used parts (that meet Olympus’s quality assurance standards) for warranty or any other repairs and (ii) make any internal or external design and/or feature changes on or to its products without any liability to incorporate such changes on or to the Products. For customers in North and South America For customers in USA Declaration of Conformity Model Number : FE-330/X-845/C-550 Trade Name : OLYMPUS Responsible Party : Address : 3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A. Telephone Number : 484-896-5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. For customers in Canada This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations.

Excluded from this limited warranty and not warranted by Olympus in any fashion, either express, implied, or by statute, are: (a) products and accessories not manufactured by Olympus and/or not bearing the “OLYMPUS” brand label (the warranty coverage for products and accessories of other manufacturers, which may be distributed by Olympus, is the responsibility of the manufacturers of such products and accessories in accordance with the terms and duration of such manufacturers’ warranties); (b) any Product which has been disassembled, repaired, tampered with, altered, changed, or modified by persons other than Olympus’s own authorized service personnel unless repair by others is made with the written consent of Olympus; (c) defects or damage to the Products resulting from wear, tear, misuse, abuse, negligence, sand, liquids, impact, improper storage, nonperformance of scheduled operator and maintenance items, battery leakage, use of non-“OLYMPUS” brand accessories, consumables, or supplies, or use of the Products in combination with non-compatible devices; (d) software programs; (e) supplies and consumables (including but not limited to lamps, ink, paper, film, prints, negatives, cables and batteries); and/or (f) Products which do not contain a validly placed and recorded Olympus serial number, unless they are a model on which Olympus does not place and record serial numbers. EXCEPT FOR THE LIMITED WARRANTY SET FORTH ABOVE, OLYMPUS MAKES NO AND DISCLAIMS ALL OTHER REPRESENTATIONS, GUARANTIES, CONDITIONS, AND WARRANTIES CONCERNING THE PRODUCTS, WHETHER DIRECT OR INDIRECT, EXPRESS OR IMPLIED, OR ARISING UNDER ANY STATUTE, ORDINANCE, COMMERCIAL USAGE OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OR REPRESENTATION AS TO THE SUITABILITY, DURABILITY, DESIGN, OPERATION, OR CONDITON OF THE PRODUCTS (OR ANY PART THEREOF) OR THE MERCHANTABILITY OF THE PRODUCTS OR THEIR FITNESS FOR A PARTICULAR PURPOSE, OR RELATING TO THE INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER PROPRIETARY RIGHT USED OR INCLUDED THEREIN. IF ANY IMPLIED WARRANTIES APPLY AS A MATTER OF LAW, THEY ARE LIMITED IN DURATION TO THE LENGTH OF THIS LIMITED WARRANTY. SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR LIMITATION OF WARRANTIES AND/OR LIMITATION OF LIABILITY SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MAY NOT APPLY. THE CUSTOMER MAY ALSO HAVE DIFFERENT AND/OR ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM STATE TO STATE. THE CUSTOMER ACKNOWLEDGES AND AGREES THAT OLYMPUS SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES THAT THE CUSTOMER MAY INCUR FROM DELAYED SHIPMENT, PRODUCT FAILURE, PRODUCT DESIGN, SELECTION, OR PRODUCTION, IMAGE OR DATA LOSS OR IMPAIRMENT OR FROM ANY OTHER CAUSE, WHETHER LIABILITY IS ASSERTED IN CONTRACT, TORT (INCLUDING NEGLIGENCE AND STRICT PRODUCT LIABILITY) OR OTHERWISE. IN NO EVENT SHALL OLYMPUS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND (INCLUDING WITHOUT LIMITATION LOSS OF PROFITS OR LOSS OF USE), WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR DAMAGE. Representations and warranties made by any person, including but not limited to dealers, representatives, salespersons, or agents of Olympus, which are inconsistent or in conflict with or in addition to the terms of this limited warranty, shall not be binding upon Olympus unless reduced to writing and approved by an expressly authorized officer of Olympus. This limited warranty is the complete and exclusive statement of warranty which Olympus agrees to provide with respect to the Products and it shall supersede all prior and contemporaneous oral or written agreements, understandings, proposals, and communications pertaining to the subject matter hereof. This limited warranty is exclusively for the benefit of the original customer and cannot be transferred or assigned.

The customer must transfer any image or other data saved on a Product to another image or data storage medium and/or remove any film from the Product prior to sending the Product to Olympus for service. IN NO EVENT SHALL OLYMPUS BE RESPONSIBLE FOR SAVING, KEEPING OR MAINTAINING ANY IMAGE OR DATA SAVED ON A PRODUCT RECEIVED BY IT FOR SERVICE, OR ON ANY FILM CONTAINED WITHIN A PRODUCT RECEIVED BY IT FOR SERVICE, NOR SHALL OLYMPUS BE RESPONSIBLE FOR ANY DAMAGES IN THE EVENT ANY IMAGE OR DATA IS LOST OR IMPAIRED WHILE SERVICE IS BEING PERFORMED (INCLUDING, WITHOUT LIMITATION, DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, LOSS OF PROFITS OR LOSS OF USE), WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR IMPAIRMENT. Package the Product carefully using ample padding material to prevent damage in transit and either deliver it to the Authorized Olympus Dealer that sold you the Product or ship it postage prepaid and insured to any of our Olympus Service Centers. When returning Products for service, your package should include the following: 1. Sales receipt showing date and place of purchase. 2. Copy of this limited warranty bearing the Product serial number corresponding to the serial number on the Product (unless it is a model on which Olympus does not place and record serial numbers). 3. A detailed description of the problem. 4. Sample prints, negatives, digital prints (or files on disk) if available and related to the problem. When service is completed, the Product will be returned to you postage prepaid. WHERE TO SEND PRODUCT FOR SERVICE See “WORLDWIDE WARRANTY” for the nearest service center. INTERNATIONAL WARRANTY SERVICE International warranty service is available under this warranty. • IBM is a registered trademark of International Business Machines Corporation. • Microsoft and Windows are registered trademarks of Microsoft Corporation. • Macintosh is a trademark of Apple Inc. • xD-Picture Card™ is a trademark. • All other company and product names are registered trademarks and/or trademarks of their respective owners. • The standards for camera file systems referred to in this manual are the “Design Rule for Camera File System/DCF” standards stipulated by the Japan Electronics and Information Technology Industries Association (JEITA). Trademarks

Recording system Still pictures : Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF)) Applicable standards : Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge Sound with still pictures : Wave format Movies : AVI Motion JPEG Memory : Internal memory xD-Picture Card (16 MB – 2 GB) (Type H/M, Standard) Number of effective pixels : 8,000,000 pixels Image pickup device : 1/2.35" CCD (primary color filter), 8,500,000 pixels (gross) Lens : Olympus lens 6.3 to 31.5 mm, f3.5 to 5.6 (equivalent to 36 to 180 mm on a 35 mm camera) Photometric system : Center-weighted metering Shutter speed : 4 to 1/2000 sec. Shooting range : 0.6 m (2.0 ft.) to ) (W), 1 m (3.3 ft.) to ) (T) (normal) 0.1 m (0.3 ft.) to ) (W), 0.6 m (2.0 ft.) to ) (T) (macro mode) 0.03 m (0.1 ft.) to ) (super macro mode) Monitor : 2.7" TFT color LCD display, 154,000 dots Outer connector : USB connector, A/V OUT jack (multi-connector) Automatic calendar system : 2000 up to 2099 Operating environment Temperature : 0°C to 40°C (32°F to 104°F) (operation)/ -20°C to 60°C (-4°F to 140°F) (storage) Humidity : 30% to 90% (operation)/10% to 90% (storage) Power supply : One Olympus lithium ion battery (LI-42B/LI-40B) Dimensions : 97.7 mm (W) × 57.7 mm (H) × 23.3 mm (D) (3.8 × 2.3 × 0.9 in.) (excluding protrusions) Weight : 123 g (4.3 oz) without battery and card

(Lithium ion battery (LI-42B) Product type : Lithium ion rechargeable battery Standard voltage : DC 3.7 V Standard capacity : 740 mAh Battery life : Approx. 300 full charges (varies on usage) Operating environment Temperature : 0°C to 40°C (32°F to 104°F) (charging)/ -10°C to 60°C (14°F to 140°F) (operation)/ -20°C to 35°C (-4°F to 95°F) (storage) Dimensions : 31.5 × 39.5 × 6 mm (1.2 × 1.5 × 0.2 in.) Weight : Approx. 15 g (0.5 oz) (Battery charger (LI-40C) Power requirements : AC 100 to 240 V (50 to 60 Hz) 3.2 VA (100 V) to 5.0 VA (240 V) Output : DC 4.2 V, 200 mA Charging time : Approx. 5 hours Operating environment Temperature : 0°C to 40°C (32°F to 104°F) (operation)/ -20°C to 60°C (-4°F to 140°F) (storage) Dimensions : 62 × 23 × 90 mm (2.4 × 0.9 × 3.5 in.) Weight : Approx. 65 g (2.3 oz)

Camera Mode dial gP. 13 OF/< button (Exposure Compensation/Print) gP. 15 X& button (Macro mode) gP. 15 NY button (Self-timer) gP. 16 Tripod socket /S button (Backlight boost/ Erase) gP. 16 Monitor gP. 28 m button gP. 16 K button (Shooting) gP. 12 q button (Playback) gP. 12 Y# button (Flash mode) gP. 16  button (OK/FUNC) gP. 15 Arrow pad (ONXY) gP. 15 Card access lamp gP. 38, 43, 49 Battery/card compartment cover gP. 4 Shutter button gP. 11 Speaker Flash gP. 16 Zoom lever gP. 17 o button gP. 11 Lens Strap eyelet gP. 3 Connector cover gP. 29, 30, 36 Multi connector gP. 29, 30, 36 Self-timer lamp gP. 16  button gP. 14 Microphone gP. 22

Item Indications Ref. Page 1 Shooting mode A, c, B, F, U, C, A etc. P. 13 2 Flash mode !, #, $ P. 16 3 Silent mode U P. 23 4 Macro mode Super macro mode & % P. 15 5 Battery check Z = full power, [ = charge the battery P. 45 6 Flash standby Camera movement warning/flash charge # (Lit) # (Blinks) P. 39 7 AF target mark T P. 9 8 Sound record R P. 22 9 Number of storable still pictures Remaining recording time 4 00:34 P. 11 P. 14 10 Current memory B (Recording pictures to the internal memory), No icon (Recording pictures to the card) P. 49 11 Self-timer Y P. 16 12 Shutter speed/Aperture value 1/1000 F3.5, etc. P. 9 13 Exposure compensation -2.0 – +2.0 P. 15 14 Compression M (NORMAL), L (FINE) P. 20 15 Image size G, H, D, C, etc. P. 20 16 ISO ISO100, ISO400, etc. P. 22 17 White balance 5, 3, 1, w – y P. 21 +2.0 +2.0 IN 00:34 00:34 VGA VGA 1 8 9 7 10 11 13 17 15 2 4 5 3 +2.0 +2.0 1/1000 1/1000 P 4 IN 8M 8M F3.5 F3.5 ISO 400 ISO 400 NORM NORM 1 6 8 9 7 11 10 13 12 17 16 15 14 2 4 5 3 Movies Still pictures

U P. 23 2 Print reservation/Number of prints <×10 P. 32 3 Sound record H P. 22 4 Protect 9 P. 25 5 Battery check Z = full power, [ = charge the battery P. 45 6 Shutter speed/Aperture value 1/1000 F3.5, etc. P. 9 7 Exposure compensation -2.0 – +2.0 P. 15 8 White balance WB AUTO, 5, 3, 1, w – y P. 21 9 Image size G, H, D, C, etc. P. 20 10 File number M 100-0004 – 11 Number of frames Playing time/Total recording time 4 00:14/00:34 – P. 12 12 Current memory B (Playing back the picture in the internal memory), No icon (Playing back the picture in the card) P. 49 13 Compression M (NORMAL), L (FINE) P. 20 14 ISO ISO100, ISO400, etc. P. 22 15 Date and time 2008.08.26 12:30 P. 29 2008.08.26 2008.08.26 12:30 12:30 100-0004 100-0004 00:14 /00:34 00:14 /00:34 IN VGA VGA 10 15 8 9 11 3 4 5 1 12 2008.08.26 2008.08.26 12:30 12:30 4 100-0004 100-0004 +2.0 +2.0 F3.5 F3.5 10 10 1/1000 1/1000 IN x 8M 8M ISO400 ISO400 NORM NORM 2 9 10 8 6 7 11 3 4 5 1 15 12 13 14 Movies Still pictures

A ALL ERASE ............................................... 26 ALL INDEX ................................................ 31 ALL PRINT................................................. 31 All-frame reservation U............................ 33 Aperture value ....................................... 9, 11 AUCTION i............................................. 13 h (AUTO) .............................................. 6 AUTO (ISO) ............................................... 22 AUTO (WB)................................................ 21 Auto flash AUTO........................................ 16 Auto focus.................................................. 40 AV cable ................................................ 3, 29 B BACKUP.................................................... 27 Battery ................................................... 4, 47 Battery charger ...................................... 4, 47 Battery check............................................. 61 BEEP ......................................................... 28 BEHIND GLASS P................................... 13 C CAMERA MENU........................................ 21 CANDLE W .............................................. 13 Card............................................... 32, 42, 49 Close-up playback U ................................ 17 Cloudy day 3 .......................................... 21 COMPRESSION........................................ 20 Continuous recording length...................... 42 Cropping pictures P..................... 25, 32, 33 CUISINE V................................................ 13 CUSTOM PRINT ....................................... 31 D Date and time X............................ 7, 29, 39 Digital zoom......................................... 14, 17 Direct printing............................................. 30 DOCUMENTS d ...................................... 13 DPOF......................................................... 32 E EASY PRINT ............................................. 30 EDIT........................................................... 24 ERASE................................................. 10, 26 Error messages ......................................... 44 Exposure compensation F ....................... 41 F FACE DETECT.......................................... 23 FILE NAME................................................ 32 File name................................................... 29 Fill-in flash #............................................. 16 FIREWORKS X ....................................... 13 Flash.......................................................... 16 Flash charge.............................................. 39 Flash mode # ........................................... 16 Flash off $................................................ 16 Fluorescent lamp wxy....................... 21 Focus .............................................. 9, 11, 40 Focus lock ................................................. 11 FORMAT ................................................... 27 Function menu .......................................... 15 G R (Shooting guide) ......................... 6, 13 I IMAGE QUALITY ...................................... 20 IMAGE SIZE.............................................. 20 Index display G ....................................... 17 INDOOR N.............................................. 13 Information displays .................................. 14 Internal memory ...................... 27, 42, 44, 49 ISO ............................................................ 22 L LIGHTING FIX........................................... 23 Lithium ion battery................................... 3, 4 M Macro mode & ......................................... 15 MEMORY FORMAT.................................. 27 Menu ......................................................... 18 MENU COLOR.......................................... 28 Menu guide ............................................... 14 Monitor .......................................... 11, 28, 61 Monitor brightness adjustment s .............................................................. 28 MULTI PRINT............................................ 31 MY FAVORITE.......................................... 24 N NIGHT+PORTRAIT M............................. 13 NTSC ........................................................ 29 Number of storable still pictures................ 42 O OLYMPUS Master..................................... 35 Operation guide......................................... 18 Optical zoom ....................................... 14, 17 P PAL ........................................................... 29 PANORAMA.............................................. 22 PC ............................................................. 36 PERFECT FIX........................................... 23 PictBridge.................................................. 30 Picture rotation y ..................................... 25 PIXEL MAPPING ...................................... 28 Playback mode q............ 10, 12, 14, 17, 62 Playback mode menu q.......................... 23 Playback on a TV ...................................... 29 Playing time/Total recording time.............. 12 POWER SAVE .......................................... 29 Press completely................................... 9, 11 Press halfway........................................ 9, 11 PRINT ORDER < .............................. 25, 31

Printing pictures......................................... 30 P (Program auto)......................................... 6 Protect 0................................................ 25 R Recording movies with or without sound R ................................................ 22 Recording R .............................................. 26 Recording sound with still pictures R ........ 22 REDEYE FIX ............................................. 23 Red-eye reduction flash ! ..................... 16 RESET................................................. 21, 43 Resizing Q.............................................. 24 S f (Scene) ................................. 6, 13, 21 SEL. IMAGE .............................................. 26 Selecting a language W....................... 27 SELF PORTRAIT R................................. 13 Self-timer Y .............................................. 16 SETUP menu............................................. 27 Shooting mode ............ 11, 12, 14, 17, 46, 61 Shooting movies n............................. 11, 14 Shooting still pictures................................. 11 SHUTTER SOUND.................................... 28 Shutter speed ........................................ 9, 11 SILENT MODE U ..................................... 23 Single-frame playback ............................... 17 Single-frame reservation < ...................... 33 Sleep mode ............................................... 39 SLIDESHOW ....................................... 23, 24 SOUND SETTINGS................................... 28 SPORT j ................................................ 13 Strap ............................................................ 3 Sunny day 5............................................ 21 SUNSET S .............................................. 13 Super macro mode % .............................. 15 T Top menu .................................................. 18 Tungsten light 1....................................... 21 U USB cable............................ 3, 30, 35, 36, 38 V VIDEO OUT............................................... 29 q VOLUME ............................................. 28 VOLUME ................................................... 12 W Warning sound 8..................................... 28 White balance WB ..................................... 21 X xD-Picture Card ............................. 22, 42, 49 Z Zoom ......................................................... 17