Olympus E-M1 Basic Manual

Thank you for purchasing an Olympus digital camera. Please read these instructions carefully. The camera you purchased is provided with the CD-ROM Instruction Manual. For detailed information oh all features and Provisions of warranty, please refer to the CD-ROM. Adobe Reader is required to view the Instruction Manual. liD Manual de base ............. 32 Merci d'avoir achete un appareil photo numerique Olympus. Veuillez lire attentivement ces instructions. L'appareil photo que vous avez achete est livre avec le manuel d'instructions sur CD-ROM. Pour des informations detaillees sur toutes les caracteristiques et les conditions d'obtention de Ia garantie, reportez-vous au CD-ROM. Adobe Reader est requis pour afficher le manuel d'instructions. [iJ Manual basi co ............... 61 Le agradecemos que haya adquirido una camara digital Olympus. Lea atentamente estas instrucciones. La camara que ha adquirido incluye el manual de instrucciones en CD-ROM. Para mas informacion sobre todas las caracterfsticas y las condiciones de Ia garantia, consulte el CD-ROM. Se necesita Adobe Reader para poder visualizar el manual de instrucciones.

North America. Information for Your Safety IMPORTANT SAFETY INSTRUCTIONS When using your photographic equipment, basic safety precautions should always be followed, including the following: • Read and understand all instructions before using. • Close supervision is necessary when any flash is used by or near children. Do not leave flash unattended while in use. • Care must be taken as burns can occur from touching hot parts. • Do not operate if the flash has been dropped or damaged - until it has been examined by qualified service personnel. • Let flash cool completely before putting away. • To reduce the risk of electric shock, do not immerse this flash in water or other liquids. • To reduce the risk of electric shock, do not disassemble this flash, but take it to qualified service personnel when service or repair work is required. Incorrect reassembly can cause electric shock when the flash is used subsequently. • The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons. SAVE THESE INSTRUCTIONS

operations Names of parts If---------, ®~~,~~~~~~ ®-~~­ (j),___--:--=--~ @.......---+---..:,...__~ ® @) ®--_;;._ __ _...J CD Mode diallock ................................. P. 18 @ Rear dial*1 ( .Q.) ....................... P. 23,38-41, 56, 58, 105 @ Fn2 button ................................ P. 23, 49 @ ~I® (Movie) button ........ P. 33/P. 22, 99 ® Front dial*1 (~) ••••••••••••••••• P. 31, 38-41 ® Shutter button ................................. P. 21 (j) Self-timer lamp/AF illuminator ............................................... P. 55/P. 91 ® Lens attachment mark .................... P. 14 ® ~ (One-touch white balance) button ........................................................ P. 57 @) IQ] (Preview) button ......................... P. 39 ® Mount (Remove the body cap before attaching the lens.) @ Mode diai ........................................ P. 18 @ Stereo microphone ............. P. 64, 74, 87 @ ON/OFF lever ................................ P. 16 @) AF([•]) (AF /Metering mode) button ( ~/(lli settings*2 ) ....•... •. P. 50, 71, 72, 73 @) Q~HDR (Sequential shooting/Self- timer/HDR) button (Bracket settings*2) ..... •....... P. 55, 37, 80 ® External flash connector ............... P. 132 @) Microphone connector cover @) Strap eyelet. ...................................... P. 9 ® Connector cover @ Lens release button ........................ P. 14 @ Lens lock pin @ Microphone connector (Third-party commercial microphones can be used. 03.5 stereo mini-plug) @ HDMI connector (Type D) ............. P. 101 @ Multi-connector ............. P. 101, 113, 116 *1 In this manual, the ~ and .Q. icons represent operations performed using the front dial and rear dial. *2 When the lever is set to 2 Indications used in this manual The following symbols are used throughout this manual. Important information on factors which may lead to a malfunction or operational problems. Also warns of operations that should be absolutely avoided. Points to note when using the camera. Useful information and hints that will help you get the most out of your camera. This document contains pages from the instruction Manual, which may be found on the supplied CD-ROM.

@ @) button .................................. P. 30, 75 ® Diopter adjustment diai ................... P. 20 @ Arrow pad* ...................................... P. 31 @ 101 (LV) button .............................. P. 19 @ MENU button ................................. P. 75 @ Monitor (Touch screen) @ [E) (Playback) button ................ P. 31, 61 ................................ P. 16, 27, 34, 36, 60 ® Viewfinder .......................... P. 19, 20, 39 ® Eye sensor (j) Eyecup .......................................... P. 133 @ Speaker @) 1ii (Erase) button ............................ P. 33 @) Tripod socket ® PBH cover ..................................... P. 129 ® Hot shoe ....................................... P. 130 @ AEL/AFL button .................. P. 32, 49, 98 @) Lever .................................. P. 38-41,91 @ Battery compartment cover ............. P. 12 @ Battery compartment lock ............... P. 12 @ Card slot cover. ............................... P. 13 @ INFO button ............................. P. 37, 60 @ Card slot ......................................... P. 13 @ Fn1 button ...................................... P. 52 * In this manual, the 6. V icons represent operations performed using the arrow pad. 4 EN

If anything is missing or damaged, contact the dealer from whom you purchased the camera. Camera • Flash case • Computer software CD-ROM • Instruction manual • Warranty card Attaching the strap 0 Body cap Flash FL-LM2 Strap USB cable CB-USB6 Lithium ion battery Lithium ion charger BLN-1 BCN-1 1 Thread the strap in the direction of the arrows. 2 Lastly, pull the strap tight making sure that it is fastened securely. • Attach the other end of the strap to the other eyelet in the same way.

Charging indicator (Charging time: Up to approximately 4 hours) (f) Cautions • Unplug the charger when charging is complete. 2 Loading the battery. Direction indicating mark ( ..&. ) Lithium ion battery Direction-~~ indicating mark 3 Closing the battery cover. Turn off the camera before opening or closing the battery compartment cover. To remove the battery, first push the battery lock knob in the direction of the arrow and then remove. (f) Cautions Battery compartment cover Battery compartment lock • Contact an authorized distributor or service center if you are unable to remove the battery. Do not use force. ~Notes • It is recommended to set aside a backup battery for prolonged shooting in case the battery in use drains. • Also read "Battery, battery charger, and card" (P. 122).

1 Loading the card. • Open the card slot cover. • Slide the card in until it is locked into place. ~ "Card basics" (P. 123) (f) Cautions • Turn off the camera before loading or removing the card. 2 Closing the card slot cover. • Close firmly until you hear a click. (f) Cautions • Be sure the card slot cover is closed before using the camera. Removing the card Press the inserted card lightly and it will be ejected. Pull out the card. (f) Cautions • Do not remove the battery or card while the card write indicator (P. 36) is displayed. Attaching.: a lens to the camera 1 Attach a lens to the camera. • Align the lens attachment mark (red) on the camera with the alignment mark (red) on the lens, then insert the lens into the camera's body. • Rotate the lens in the direction indicated by the arrow until you hear it clicks. (f) Cautions • Make sure the camera is turned off. • Do not press the lens release button. • Do not touch internal portions of the camera.

Removing the lens from the camera While pressing the lens release button, rotate the lens in the direction of the arrow. Lens release button 1 Remove the terminal cover from the flash unit and attach the flash to the camera. • Slide the flash unit all the way in, stopping when it contacts the back of the shoe and is securely in place. UNLOCK switch 2 To use the flash, raise the flash head. • Lower the flash head when the flash is not in use. (f) Cautions • When not using the accessory port, be sure to attach the cover. Removing the Flash Unit Press the UNLOCK switch while removing the flash unit. UNLOCK switch

• When the camera is turned on, the monitor will turn on. • To turn off the camera, return the lever to the OFF position. • ON/OFF lever • Monitor ----------Battery level ~' 2013.10.01 12:30 ISO WB A±O AUTO AUTO G ± 0 [::::::::::] S·AF D ~ S·IS AUTO () N t!) 250 F5.6 Using the monitor ;,i·Finish ®±0 ©±0 :~±0 /NORM (9 i sRGB mil [ ... ] 010203 1023 ... ,,., (green): Camera ready to shoot. I ,,., (green): Low battery ~ (blinks red): Charge the battery. You can adjust the angle of the monitor. Camera sleep operation If no operations are performed for a minute, the camera enters "sleep" (stand-by) mode to turn off the monitor and to cancel all actions. The camera activates again when you touch any button (the shutter button, [E) button, etc.). The camera will turn off automatically if left in sleep mode for 4 hours. Turn the camera on again before use.

name is also included with the date and time information. Be sure to set the correct date and time before using the camera. 1 Display the menus. • Press the MENU button to display the menus. 2 Select [e)] in the [t] (setup) tab. • Use ~ V on the arrow pad to select [t] and press [>. • Select [ (!)] and press [>. 3 Set the date and time. • Use <][>to select items. • Use~ V to change the selected item. • Use ~ V to select the date format. 4 Save settings and exit. [t] tab Shooti~~~LI\IJenu 1 ~ Card Setup 02 Reset/Myset 8 ~·· #() Image Aspect 4:3 Digital Tele-converter Off ~ BacktEl!l Set 1!!3 Q)_ y M D Time 2013 0 Y/M/0 Cancel~ The time is displayed using a 24-hour clock. • Press@ to set the camera clock and exit to the main menu. • Press the MENU button to exit the menus.

Use the mode dial to select the shooting mode. mmm A full auto mode in which the camera automatically optimizes settings for the current scene. The camera does all the work, which is convenient for beginners. p ······· Aperture and shutter speed are automatically adjusted for optimal results. A You control aperture. You can sharpen or soften background details. s You control shutter speed. You can express the motion of moving subjects, or freeze motion without any blur. > You control aperture and shutter speed. You can shoot with long exposures for M ,t fireworks or other dark scenes. ART Select an art filter. SCN Select a scene according to the subject. II You can shoot a PHOTO STORY. Shoot with selected PHOTO STORY type. iS · Shoot movies using shutter speed and aperture effects and movie special effects. First, try taking photographs in full auto mode. 1 Press the mode dial lock to release the lock and set the mode dial to tmml. • When the mode dial lock has been pressed down, the mode dial is locked. Each time you press the mode dial lock, it switches between locked/released. • Monitor ISO sensitivity 2013.10.0112:30 ISO WB AUTO AUTO u~mm D S~SAUTO mN m 2~0 F5.6 . --. A±O G±O S-AF a Ell . . - ~'i-Finish ' ~ ®±0 ©± ~±0 .I' NO!~ 8i sRGi i ~I I [ ... ] !' 010203 1023 Available recording time Number of storable still pictures EN 111

viewfinder and shooting with live view. When shooting with the viewfinder, the super control panel will be displayed on the monitor. 101 button If the display in the viewfinder looks blurry Look through the viewfinder and rotate the diopter adjustment dial until the display is in sharp focus. Shooting ~~ill . Rictures ~' ! 2013.10.01 12:30 ISO WB A±O AUTO AUTO G ± 0 m~mm S-AF D ~ S-IS AUTO (J N [!] 250 F5.6 ~'i-Finish ®±0 ©±0 ~~±0 ./'NORM $; sRGB 1m [n•J 010203 1023 Super control panel 1 Set up the camera and decide on the composition. • The viewfinder turns on and the monitor turns off automatically when you put your eye to the viewfinder. • Be careful that your fingers or the camera strap do not obstruct the lens. Horizontal grip Vertical grip

• The AF confirmation mark (e) will be displayed, and a green frame (AF target) will be displayed in the focus location. Press the shutter button halfway. AF target Aperture value AF confirmation mark Shutter speed • The ISO sensitivity, shutter speed and aperture value that have been set automatically by the camera are displayed. • If the AF confirmation mark blinks, the subject is not in focus. (P. 136) 3 Press the shutter button again to take a picture. (Press all the way down.) • The shutter sounds and the picture is taken. • The shot image will be displayed on the monitor. Pressing the shutter button halfway and all the way down The shutter button has two positions. The act of lightly pressing the shutter button to the first position and holding it there is called "pressing the shutter button halfway," that of pressing it all the way down to the second position "pressing the shutter button all (or the rest of) the way down." (f) Cautions Press halfway --~ Press the rest of the way down • You can change the viewfinder display style. In this manual, [Style 1] is used. • If the angle of the monitor has been changed, the viewfinder will not light up automatically. • If you press and hold down the 101 button, a menu is displayed that allows you to change the settings for automatically lighting up the viewfinder. EN 113

When shooting using the viewfinder, the super control panel will be displayed on the monitor. Set your main shooting functions using the super control panel. Super control panel display Settings that can be modified using the super control panel CD Currently selected option ® Color space ..................................... P. 95 ® ISO sensitivity ................................. P. 57 @) Button function assignment ...... P. 91, 99 @ Flash mode ..................................... P. 50 ® Face priority .................................... P. 53 @ Flash intensity controi. .................... P. 71 @ Metering mode ................................ P. 72 ® Sequential shooting/self-timer ........ P. 55 @ Aspect ratio ..................................... P. 69 ® White balance ................................. P. 56 @ Record mode .................................. P. 70 White balance compensation @) AF mode ......................................... P. 73 0 Picture mode ................................... P. 68 AF target. ........................................ P. 52 ® Sharpness @ .................................. P. 78 @) Image stabilizer ............................... P. 66 Contrast © ..................................... P. 78 Saturation ~2~ ................................. P. 78 Gradation J' ................................... P. 78 B&W Filter ® ................................. P. 78 Picture tone ® ............................... P. 79 (f) Cautions • Not displayed in SCN, II, or&!} modes. 1 Press the @) button. Cursor • The cursor appears. 2 Touch the function you wish to set. • The cursor appears over the function you touched. 3 Turn the front dial and select a setting value. ~Notes • You can display menus for each function by selecting a function and pressing @).

pressing the 101 button. When shooting using live view, the subject is displayed on the monitor. 101 button Monitor s .. b.Qo.ting ... still ... pictures 1 Set up the camera and decide on the composition. • Be careful not to cover the lens with a finger or the camera strap. 2 Touch the area of the subject you want to focus on. • The camera focuses on the area you touched and automatically takes a photograph. • The recorded image is displayed on the monitor. « Notes • You can also use the shutter button to take a photograph, just as you would when shooting using the viewfinder. • You can also press the shutter button after the camera focuses on the area you touched to take a photograph. ~ "Using the touch screen" (P. 27) EN 115

recording in full auto mode. 1 Set the mode dial to mmi!l. 2 Press the @ button to begin recording. • You can change the focus location by touching the screen while recording (P. 27). 3 Press the @ button again to end recording. (]) Cautions Displayed during Recording time recording • When using a camera with a CMOS image sensor, moving objects may appear distorted due to the rolling shutter phenomenon. This is a physical phenomenon whereby distortion occurs in the filmed image when shooting a fast-moving subject or due to camera shaking. In particular, this phenomenon becomes more noticeable when using a long focal length. • If the camera is used for extended periods, the temperature of the image pickup device will rise and noise and colored fog may appear in images. Turn off the camera for a short time. Noise and colored fog may also appear in images recorded at high ISO sensitivity settings. If the temperature rises further, the camera will turn off automatically. • When using a Four Thirds system lens, the AF will not operate while recording movies. • Taking photographs during movie recording • Press the shutter button during movie recording to pause movie recording and take a photograph. Movie recording restarts after the photograph is taken. Press the ® button to end recording. Three files will be recorded to the memory card: the movie footage preceding the photograph, the photograph itself, and the movie footage following the photograph. • Only one photograph can be taken at a time during movie recording; the self-timer and flash cannot be used. (]) Cautions • Image size and quality for photographs are independent of movie frame size. • The autofocus and metering used in movie mode may differ from that used to take photographs. • The ® button cannot be used to record movies in the following instances: Multiple exposure (still photography also ends.)/shutter button pressed halfway/during bulb or time photography/sequential shooting/Panorama/SCN mode (e-Portrait, Hand- Held Starlight, 30)/time lapse shooting

When shooting using live view, touch panel functions can be used. Selecting a focusing method You can focus and shoot by tapping the monitor. Tap D to cycle through touch screen settings. Touch screen operations disabled. Tap a subject to focus and automatically release the shutter. This function is not available in &9 mode. B Tap to display an AF target and focus on the subject in the selected area. You can use the touch screen to choose the position and size of the focus frame. Photographs can be taken by pressing the shutter button. • Previewing Your Subject ( 11tJ) 1 Tap the subject in the display. • An AF target will be displayed. • Use the slider to choose the size of the frame. 2 Use the slider to choose the size of the target frame, and then tap to zoom in on the subject of the target frame. • Use your finger to scroll the display when the picture is zoomed in. • Tap B to cancel the zoom display. (/) Cautions • When using a Four Thirds system lens, the range within which auto focus is possible decreases. If you touch the screen outside of the possible range, the camera shoots without using AF. You can connect the camera to a smartphone and control the camera over Wi-Fi. To use this function, you must have the relevant app installed on the smartphone. ~ "Using the camera wireless LAN function" (P. 119), "Things you can do with OI.Share" (P. 121) EN 117

M, ~, and II modes. Using live control allows you to preview the effects of different settings in the monitor. Functions Settings • Available settings Image stabilizer .................................... P. 66 Record mode ........................................ P. 70 Picture mode ........................................ P. 68 Flash mode ........................................... P. 50 Scene mode ......................................... P. 45 Flash intensity controi ........................... P. 71 Art filter mode ....................................... P. 44 Metering mode ...................................... P. 72 &!? mode ............................................... P. 69 AF mode ............................................... P. 73 White balance ....................................... P. 56 ISO sensitivity ....................................... P. 57 Sequential shooting/self-timer .............. P. 55 Face priority .......................................... P. 53 Aspect ratio ........................................... P. 69 Movie sound record .............................. P. 7 4 1 Press @) to display the live control. • To hide the live control, press (§ again. 2 Use the rear dial to select the settings, use the front dial to change the selected setting, and press@. • The selected settings take effect automatically if no operations are performed for about 8 seconds. (f) Cautions Displays the selected function _..,..,."""': name • Some items are not available in some shooting modes. ~Notes Arrow pad • Live control can also be used when shooting using the viewfinder. Cursor Arrow pad If you press the <§ button during viewfinder display, live control will be displayed in the viewfinder. If the viewfinder is switched off while shooting is in progress, live control will also be canceled.

1 Press the [E button. • Your most recent photograph or movie will be displayed. • Select the desired photograph or movie using the front dial or arrow pad. Front dial ~"" a Displays the Displays previous the next frame frame [EJ button lnd~){ displ~y/Calendar display Still image Movie • To start index playback, turn the rear dial to ~ during single-frame playback. To start calendar playback, turn the dial a little further. • Turn the rear dial to ~ to return to single-frame playback. i .g • + s Index display .g ~ + s I Calendar display EN 119

Close-up playback • In single-frame playback, turn the rear dial to ~ to zoom in. Turn to ~to return to single- frame playback. Rear dial W~t,biog"iimo.¥.i .e.&, Select a movie and press the @) button to display the playback menu. Select [Movie Play] and press the @) button to begin playback. To interrupt movie playback, press MENU. llo.l.u.m.e ........... . . ... .,. + Volume can be adjusted by pressing ~ or '\1 during single-frame and movie playback. Protecting images Protect images from accidental deletion. Display an image you wish to protect and press the AEL/AFL button; a On (protect) icon will appear on the image. Press the AEL/AFL button again to remove protection. You can also protect multiple selected images. (f) Cautions • Formatting the card erases all images even if they have been protected. t;rasing .im~ge$ o-n (protect) icon Display an image you want to delete and press the 1iD button. Select [Yes] and press the @) button. Selecting images Select the image. You can also select multiple images for protection or deletion. Press the ~ button to select an image; a ~ icon will appear on the image. Press the ~ button again to cancel the selection. Press @)to display the delete or protect selection menu.

• Full-frame playback Viewing additional images • Slide your finger to the left to view later frames, right to scroll view earlier frames. Playback zoom • Slide the bar up or down to zoom in or out. • Use your finger to scroll the display when the picture is zoomed in. • Tap ID to display index playback. Tap iEE~i again ~r calendar playback. • Index/Calendar Playback Page ahead/Page back • Slide your finger up to view the next page, down to view the previous page. • Use jg~j or l..ol to choose the number of images displayed. • Tap i~Pi several times to return to single-frame playback. Viewing images • Tap an image to view it full frame. S~llctigg ....... etnd ... >g,:Qtl.ctin.g ..... ima.ges In single-frame playback, lightly touch the screen to display the touch menu. You can then perform the desired operation by touching the icons in the touch menu. Select an image. You can select multiple images for protection. ·•: .• r:< •• ··::)§{•+·······.•.·•.·l You can set the images you wish to share over Wi-Fi connection. ll@f [Share Order] (P. 62) Protects an image. (/) Cautions • The situations in which touch screen operations are not available include the following. Panorama/30/e-portrait/multiple exposure/during bulb or time photography/one-touch white balance dialog/when buttons or dials are in use • Do not touch the display with your fingernails or other sharp objects. • Gloves or monitor covers may interfere with touch screen operation. • You can also use the touch screen with the ART, SCN and II menus. Tap an icon to select it. EN 121

CD ® ® ·~ r.ICiD roo ~Iii ~ 250 F5.6 +2.0 = G) Battery check lr, .. l Lit up: Ready for use. I , .. 1 Lit up: Battery is running low. ~ Blinks (red): Charging required. ® Shooting mode ................... P. 18, 38-47 @ Myset .............................................. P. 77 @ Available recording time ® Number of storable still pictures ... P. 124 ® ISO sensitivity ................................. P. 57 (j) White balance ................................. P. 56 ® Highlight and shadow control. ......... P. 49 ....... , Hi +7 WB ISO-A 01:02:03 0 Sh-3 AUTO 200 1023 ® Top: Flash intensity control ............. P. 71 Bottom: Exposure compensation indicator ............................. P. 49 @) Exposure compensation value ........ P. 49 ® Aperture value ......................... P. 38-41 @ Shutter speed .......................... P. 38-41 @ AE Lock IAELI ................................... P. 49 @ AF confirmation mark ...................... P. 21 @ Flash ............................................... P. 50 (blinks: charging in progress) @) PBH (displayed when camera is receiving power from power battery holder) ........................................... P. 129 @ Level gauge (displayed by pressing the shutter button down halfway) .......... P. 37 You can change the viewfinder display style. In this manual, [Style 1] is used. ~ [Built-in EVF Style] (P. 97)

CD Card write indicator ......................... P. 13 ® Wi-Fi connection ..................... P. 27, 119 @ Super FP flash .............................. P. 130 @ RC mode ....................................... P. 131 @ Auto bracket/HDRIHDRI ........... P. 80/P. 59 ® Multiple exposure ............................ P. 82 (j) High frame rate ............................... P. 93 @ Digital Tele-converter ...................... P. 84 ® Time lapse shooting ........................ P. 83 @) Face priority .................................... P. 53 ® Movie sound ................................... P. 74 @ Focal length/Internal temperature warning IOrcrF ................ P. 128/P. 139 @ Flash ............................................... P. 50 (blinks: charging in progress, lights up: charging completed) @ AF confirmation mark ...................... P. 21 @ Image stabilizer ............................... P. 66 @) Art filter ........................................... P. 44 Scene mode .................................... P. 45 Picture mode ................................... P. 68 @ White balance ................................. P. 56 @ Sequential shooting/self-timer ........ P. 55 @) Aspect ratio ..................................... P. 69 ® Record mode (still images) ............. P. 70 @ Record mode (movies) ................... P. 71 @ Available recording time @ Number of storable still pictures ... P. 124 @ Highlight&Shadow Controi .............. P. 49 @ Top: Flash intensity control ...... P. 71 Bottom: Exposure compensation indicator ............................ P. 49 @ Exposure compensation value ........ P. 49 ® Aperture value ......................... P. 38-41 @ Shutter speed .......................... P. 38-41 @ Histogram ....................................... P. 37 @ AE Lock .......................................... P. 49 ® Shooting mode ................... P. 18, 38-47 @ Myset .............................................. P. 77 @ Shooting using touch screen operations ....................................... P. 27 @ Flash intensity controi ..................... P. 71 @ ISO sensitivity ................................. P. 57 @ AF mode ......................................... P. 73 ® Metering mode ................................ P. 72 @ Flash mode ..................................... P. 50 @ Battery check ... , .. , Lit up (green): Ready for use (displayed for about ten seconds after the camera is turned on.) I , .. , Lit up (green): Battery is running low. ~ Blinks (red): Charging required @ Live guide recall. ............................. P. 28 EN 123

• A menu of art filters will be displayed. Select a filter using ~ V. • Press @) or press the shutter button halfway to select the highlighted item and exit the art filter menu. • Types of art filters ~ Pop Art ~ Pin Hole ~ Soft Focus ~ Diorama ~ Pale&Light Color ~ Cross Process mJ Light Tone ml Gentle Sepia ~ Grainy Film ~ Dramatic Tone 2 Shoot. ~ Key Line ~ Watercolor ~ ART BKT (ART bracketing) • To choose a different setting, press @) to display the art filter menu. Shooting,in, ... &c~ne;,.mgde , 1 Rotate the mode dial to SCN. • A menu of scene menu will be displayed. Select a scene using ~ V. • Press @) or press the shutter button halfway to select the highlighted item and exit the scene menu. • Types of scene modes ~ Portrait [t;) Children ~ e-Portrait §] High Key ~ Landscape Ill Low Key ~ Landscape+ Portrait m DIS Mode ~ Sport ~ Macro ~ Hand-Held Starlight ~ Nature Macro ~ Night Scene I!!J Candle 1m Night+ Portrait ~ Sunset 2 Shoot. 1m Documents ~ Panorama (P. 46) • Fireworks ~ Beach & Snow ~ D Fisheye Effect rgm D Wide-Angle ~ D Macro ~ 3D Photo • To choose a different setting, press @)to display the scene menu. Using PHOTO STORY 1 Rotate the mode dial to 11. • A PHOTO STORY menu will be displayed.

• You can choose different effects, number of frames and aspect ratios for each theme. You can also change the aspect ratio, the division pattern and the frame effects of individual images. • You can change the frame color and frame surrounding effect in each variation. • Every theme and variation provides a different PHOTO STORY. 3 After finishing the settings, press @). • The monitor switches to PHOTO STORY display. • The subject of current frame is displayed in live view. • Touch any of the masked frames to switch the masked frame to the current frame. • Press the MENU button to change the theme. 4 Shoot an image for the first frame. • The image you have shot is displayed in the first frame. 5 Shoot an image for the next frame. • View and shoot the subject for the next frame. • Press 1ii to cancel the image in the directly preceding frame and retake the shot. • Touch any frame to cancel the image in it and retake the shot. Touch the frame, and then touch a. 6 Once you have shot all the frames, press @) to save the image. • Press the MENU button, and you can select other themes. LJ,slng a flash (flash .phQtQg.r;aRbY) The flash can be set manually as required. The flash can be used for flash photography in a variety of shooting conditions. 1 Attach the flash to the camera and raise the light-emitting unit. • ~ "Attaching the flash unit" (P. 15) 2 Set the lever to position 2 and press the AF(•) button. When shooting using live view 3 Select a setting using the rear dial and press the @) button. • The options available and the order in which they are displayed vary depending on the shooting mode. ~ "Flash modes that can be set by shooting mode" (P. 51) 4 Press the shutter button all the way. EN j25

The menus contain shooting and playback options that are not displayed by the live control, and let you customize the camera settings for easier use. ~ ,, .,,,, Preliminary and basic shooting options q ,,• .. Ii\\ Advanced shooting options IE Playback and retouch options ' ·' Customizing camera settings (P. 90) ~ Accessory port menu options for accessory port devices such as EVF and OLYMPUS PENPAL (P. 108)* t Camera setup (e.g., date and language) * Not displayed at default settings. 1 Press the MENU button to display the menus. Operation guide 4 '~§ Press the MENU button--~ to go back one screen 2 Use 6.. V to select a tab and press @. Press @) to confirm the setting 3 Select an item using 6.. V and press @ to display options for the selected item. The current setting is displayed ShootinimMenu 2 Ill Function Q /~ ·=- 0 :iii Image Stabilizer 02 Bracketing Off HDR Off Multiple Exposure Off Time Lapse Settings Off ~ RC Mode Off Back~ Set l!l3 4 Use 6.. V to highlight an option and press @ to select. • Press the MENU button repeatedly to exit the menu. «Notes • For the default settings of each option, refer to "Menu directory" (P. 142). • A guide is displayed for about 2 seconds after you select an option. Press the INFO button to view or hide guides.

You can make settings relating to devices connected via the accessory port. Before Using the accessory port menus The Accessory Port menu is only available when the appropriate option is selected for the [#0 /~ Menu Display] item in the setup menu. 1 Press the MENU button to display the menus, and display the t (Setup Menu) tab. _2 Select [##/(@ Menu Display] and set [l@ Menu Display] to [On]. • The~ (Accessory Port Menu) tab will be displayed in the menu. Accessory Port Menu 1ft OLYMPUS PENPAL Share (P. 110) ~ OLYMPUS PENPALAibum (P. 111) a Electronic Viewfinder (P. 111) • The charger can be used in most home electrical sources within the range of 100 V to 240V AC (50/60Hz) around the world. However, depending on the country or area you are in, the AC wall outlet may be shaped differently and the charger may require a plug adapter to match the wall outlet. For details, ask at your local electrical shop or travel agent. • Do not use commercially available travel adapters as the charger may malfunction. Flash FL-LM2 Gno: 7 (ISO 100•m) Monitor 3.0" TFT color LCD USB cable CB-USB6 Lithium ion battery BLN-1 Lithium ion charger BCN-1 Operating environment (Temperature) -10°C- 40°C (14°F- 104°F) (operation)/ -20°C- 60°C (-4°F- 140°F) (storage) In this manual, all storage devices are referred to as "cards." The following types of SD memory card (commercially available) can be used with this camera: SD, SDHC, SDXC, and Eye-Fi. For the latest information, please visit the Olympus website. SO card write protect switch The SO card body has a write protect switch. If you set the switch to + the "LOCK" side, you will not be able to write to the card, delete data or format. Return the switch to the unlock position enable writing. EN 127

deleting the data. When discarding, destroy the card to prevent leakage of personal information. • Use the Eye-Fi card in compliance with the laws and regulations of the country where the camera is used. Remove the Eye-Fi card from the camera or disable the card functions in airplanes and other locations where use is prohibited. ~ [Eye-Fi] (P. 98) • The Eye-Fi card may become hot during use. • When using an Eye-Fi card, the battery may run out faster. • When using an Eye-Fi card, the camera may function more slowly. This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. The lines may appear on the recorded movie. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL. .Lt DANGER An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product. If the product is used without observing the information given under this symbol, serious injury or death may result. WARNING If the product is used without observing the information given under this symbol, injury or death may result. .Lt CAUTION WARNING! If the product is used without observing the information given under this symbol, minor personal injury, damage to the equipment, or loss of valuable data may result. TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.

Before you use the product, read all operating instructions. Save all manuals and documentation for future reference. Cleaning -Always unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this product. Attachments - For your safety, and to avoid damaging the product, use only accessories recommended by Olympus. Water and Moisture- For precautions on products with weatherproof designs, read the weatherproofing sections. Location - To avoid damage to the product, mount the product securely on a stable tripod, stand, or bracket. Power Source - Connect this product only to the power source described on the product label. Foreign Objects -To avoid personal injury, never insert a metal object into the product. Heat - Never use or store this product near any heat source such as a radiator, heat register, stove, or any type of equipment or appliance that generates heat, including stereo amplifiers. ~Godu~t Handling Pre~.au~iQns ~WARNING • Do not use the camera near flammable or explosive gases. • Do not use the flash and LED on people (infants, small children, etc.) at close range. You must be at least 1 m (3 ft.) away from the faces of your subjects. Firing the flash too close to the subject's eyes could cause a momentary loss of vision. • Keep young children, infants, and animals such as pets away from the camera. Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury: • Becoming entangled in the camera strap, causing strangulation. • Accidentally swallowing the battery, cards or other small parts. • Accidentally firing the flash into their own eyes or those of another child. • Accidentally being injured by the moving parts of the camera. • Do not look at the sun or strong lights with the camera. • Do not use or store the camera in dusty or humid places. • Do not cover the flash with a hand while firing. ~CAUTION • Stop using the camera immediately if you notice any unusual odors, noise, or smoke around it. Never remove the batteries with bare hands, which may cause a fire or burn your hands. • Never hold or operate the camera with wet hands. • Do not leave the camera in places where it may be subject to extremely high temperatures. Doing so may cause parts to deteriorate and, in some circumstances, cause the camera to catch fire. Do not use the charger if it is covered (such as a blanket). This could cause overheating, resulting in fire. • Handle the camera with care to avoid getting a low-temperature burn. When the camera contains metal parts, overheating can result in a low-temperature burn. Pay attention to the following: • When used for a long period, the camera will get hot. If you hold on to the camera in this state, a low temperature burn may be caused. • In places subject to extremely cold temperatures, the temperature of the camera's body may be lower than the environmental temperature. If possible, wear gloves when handling the camera in cold temperatures. Be careful with the strap. Be careful with the strap when you carry the camera. It could easily catch on stray objects - and cause serious damage. El .at~e~ .. :t:liUJdli .ng xPtQ~.a.utiog.s ..... . Follow these important guidelines to prevent batteries from leaking, overheating, burning, exploding, or causing electrical shocks or burns. ~DANGER • The camera uses a lithium ion battery specified by Olympus. Charge the battery with the specified charger. Do not use any other chargers. • Never heat or incinerate batteries. • Take precautions when carrying or storing batteries to prevent them from coming into contact with any metal objects such as jewelry, pins, fasteners, etc. • Never store batteries where they will be exposed to direct sunlight, or subjected to high temperatures in a hot vehicle, near a heat source, etc. • To prevent causing battery leaks or damaging their terminals, carefully follow all instructions regarding the use of batteries. Never attempt to disassemble a battery or modify it in any way, by soldering, etc. EN 129

your eyes immediately with clear, cold running water and seek medical attention immediately. • Always store batteries out of the reach of small children. If a child accidentally swallows a battery, seek medical attention immediately. • Should you notice that the charger is emitting smoke, heat, or an unusual noise or smell, immediately cease use and unplug the charger from the power outlet, and then contact an authorized distributor or service center. ~WARNING • Keep batteries dry at all times. • To prevent batteries from leaking, overheating, or causing a fire or explosion, use only batteries recommended for use with this product. • Insert the battery carefully as described in the operating instructions. • If rechargeable batteries have not been recharged within the specified time, stop charging them and do not use them. • Do not use a battery if it is cracked or broken. • If a battery leaks, becomes discolored or deformed, or becomes abnormal in any other way during operation, stop using the camera. • If a battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean, running cold water immediately. If the fluid burns your skin, seek medical attention immediately. • Never subject batteries to strong shocks or continuous vibration. ~CAUTION • Before loading, always inspect the battery carefully for leaks, discoloration, warping, or any other abnormality. • The battery may become hot during prolonged use. To avoid minor burns, do not remove it immediately after using the camera. • Always unload the battery from the camera before storing the camera for a long period. • This camera uses a lithium ion battery specified by Olympus. Do not use any other type of battery. • There is a risk of explosion if the battery is replaced with the incorrect battery type. Dispose of the used battery following the instructions "Battery Handling Precautions". • When the camera will not be used for an extended period, store it in a cool place. • Please recycle batteries to help save our planet's resources. When you throw away dead batteries, be sure to cover their terminals and always observe local laws and regulations. Precautions when using the wireless LA.N fuoction ~WARNING Turn off the camera in hospitals and other locations where medical equipment is present. The radio waves from the camera may adversely affect medical equipment, causing a malfunction that results in an accident. • Turn off the camera when on board aircraft. Using wireless devices onboard may hinder safe operation of the aircraft. FC.C Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. • Only the OLYMPUS-supplied USB cable should be used to connect the camera to USB enabled personal computers. FCC Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-1 02 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

For customers in USA Declaration of Conformity Model Number : E-M1 Trade Name : OLYMPUS Responsible Party : OLYMPUS IMAGING AMERICA INC. Address : 3500 Corporate Parkway, P. 0. Box 610, Center Valley, PA 18034-0610, USA Telephone Number : 484-896-5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. For customers in Canada This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3(B) E .. or customers in M.exlco The operation of this equipment is subject to the following two conditions: (1) it is possible that this equipment or device may not cause harmful interference, and (2) this equipment or device must accept any interference, including interference that may cause undesired operation. Irad.emarks • Microsoft and Windows are registered trademarks of Microsoft Corporation. • Macintosh is a trademark of Apple Inc. • SDXC Logo is a trademark of SD-3C, LLC. • Eye-Fi is a trademark of Eye-Fi, Inc. • "Shadow Adjustment Technology" function contains patented technologies from Apical Limited. • Micro Four Thirds, Four Thirds, and the Micro Four Thirds and Four Thirds logos are apical trademarks or registered trademarks of the OLYMPUS IMAGING Corporation in Japan, the United States, the countries of the European Union, and other countries. • "PEN PAL" is used in reference to the OLYMPUS PEN PAL. • Wi-Fi is a registered trademark of the Wi-Fi Alliance. • The Wi-Fi CERTIFIED logo is a certification mark of the Wi-Fi Alliance. • The standards for camera file systems referred to in this manual are the "Design Rule for Camera File System/DCF" standards stipulated by the Japan Electronics and Information Technology Industries Association (JEITA). • All other company and product names are registered trademarks and/or trademarks of their respective owners. MfFi) CERTIFIED THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP:/IWWW.MPEGLA.COM The software in this camera may include third party software. Any third party software is subject to the terms and conditions, imposed by the owners or licensors of that software, under which software is provided to you. Those terms and other third party software notices, if any, may be found in the software notice PDF file stored within the accompanying CD-ROM or at http://www.olympus.co.jp/en/support/imsg/digicamera/download/notice/notice.efm EN 131

3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A. Tel. 484-896-5000 Technical Support (U.S.A.) 24/7 online automated help: http://www.olympusamerica.com/support Phone customer support: Tel. 1-800-260-1625 (Toil-free) Our phone customer support is available from 9am to 9pm (Monday to Friday) ET E-mail: [email protected] To find the nearest Service Centers, please visit: http://olympusamerica.com/repair U.S.A./CANADA: Olympus Imaging America Inc. Tel: (888)553-4448 http://www.olympusamerica.com/repair © 2013 OLYMPUS IMAGING CORP. Printed in China Service Centers Mexico: Olympus Imaging de Mexico S.A. de C.V. Tel: 01 800 8002128 http://www.olympus.com.mx WC161301

Quick task index 1. Preparing the camera and flow of operations 2. Shooting using the viewfinder 3. Shooting using live view 4. Viewing photographs and movies 5. Basic operations 6. Using shooting options 7. Menu functions 8. Printing pictures 9. Connecting the camera to a computer and a smartphone 10. Battery, battery charger, and card 11. Interchangeable lenses 12. Using separately sold accessories 13. Information 14. SAFETY PRECAUTIONS Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. We recommend that you take test shots to get accustomed to your camera before taking important photographs. The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. The contents in this manual are based on firmware version 1.0 for this camera. If there are additions and/or modifications of functions due to firmware update for the camera, the contents will differ. For the latest information, please visit the Olympus website. Instruction Manual DIGITAL CAMERA

North America. Information for Your Safety IMPORTANT SAFETY INSTRUCTIONS When using your photographic equipment, basic safety precautions should always be followed, including the following: • Read and understand all instructions before using. • Close supervision is necessary when any � ash is used by or near children. Do not leave � ash unattended while in use. • Care must be taken as burns can occur from touching hot parts. • Do not operate if the � ash has been dropped or damaged - until it has been examined by quali� ed service personnel. • Let � ash cool completely before putting away. • To reduce the risk of electric shock, do not immerse this � ash in water or other liquids. • To reduce the risk of electric shock, do not disassemble this � ash, but take it to quali� ed service personnel when service or repair work is required. Incorrect reassembly can cause electric shock when the � ash is used subsequently. • The use of an accessory attachment not recommended by the manufacturer may cause a risk of � re, electric shock, or injury to persons. SAVE THESE INSTRUCTIONS Indications used in this manual The following symbols are used throughout this manual. # Cautions Important information on factors which may lead to a malfunction or operational problems. Also warns of operations that should be absolutely avoided. $ Notes Points to note when using the camera. % Tips Useful information and hints that will help you get the most out of your camera. g Reference pages describing details or related information.

Quick task index 7 Unpack the box contents .............9 Preparing the camera and � ow of operations 10 Names of parts ...........................10 Charging and inserting the battery .........................................12 Inserting and removing cards ...13 Attaching a lens to the camera .........................................14 Attaching the � ash unit .............15 Power on .....................................16 Setting the date/time ..................17 Setting the shooting mode ........18 Selecting a shooting method ....19 Shooting using the view� nder 20 Shooting ......................................20 Shooting still pictures................20 Recording movies .....................22 Setting shooting functions ........23 Using the Multi-function button........................................23 Using the super control panel ...24 Shooting using live view 25 Shooting ......................................25 Shooting still pictures................25 Recording movies .....................26 Using the touch screen ..............27 Selecting a focusing method ....27 Using the wireless LAN function .....................................27 Setting shooting functions ........28 Using live guides ......................28 Using live control .......................30 Viewing photographs and movies 31 Viewing photographs and movies .........................................31 Index display/Calendar display ......................................31 Viewing still images ..................32 Watching movies ......................32 Volume......................................32 Protecting images .....................32 Erasing images .........................33 Selecting images ......................33 Using the touch screen ..............34 Selecting and protecting images ......................................34 Basic operations 35 Information displays while shooting ......................................35 View� nder display when shooting using the view� nder ..................35 Monitor display when shooting using live view ..........................36 Switching the information display ......................................37 Using the shooting modes ........38 “Point-and-shoot” photography (P program mode) ....................38 Choosing aperture (A aperture-priority mode) .......39 Choosing shutter speed (S shutter-priority mode) ..........40 Choosing aperture and shutter speed (M manual mode) ..........41 Table of Contents

Using movie mode (n) ............42 Adding effects to a movie [Movie Effect] ............................42 Using art � lters..........................44 Shooting in scene mode ...........45 Using PHOTO STORY .............47 Commonly used shooting options ........................................49 Controlling exposure (exposure compensation) .........49 Changing the brightness of highlights and shadows ............49 Locking the exposure (AE Lock) ..................................49 Using a � ash (� ash photography)...................50 Choosing a focus target (AF Area) ..................................52 Setting the AF target .................52 Face priority AF/pupil detection AF .............................................53 Zoom frame AF/zoom AF..........54 Sequential shooting/using the self timer ...................................55 Adjusting color (white balance) .........................56 ISO sensitivity ...........................57 Controlling color (Color Creator)..........................58 HDR photography .....................59 Information display during playback ......................................60 Playback image information .....60 Switching the information display ......................................60 Changing the playback information display method.......61 Sharing images over Wi-Fi connection (Share Order) .........62 Manipulating playback images ......................................63 Using shooting options 66 Reducing camera shake (image stabilizer) ......................66 Processing options (picture mode) ..........................68 Adding effects to a movie .........69 Setting the image aspect ..........69 Image quality (record mode).....70 Adjusting � ash output (� ash intensity control)..............71 Choosing how the camera measures brightness (metering) .................................72 Choosing a focus mode (AF mode).................................73 Movie sound options (recording sound with movies) ...................74 Menu functions 75 Basic menu operations ..............75 Using Shooting Menu 1/ Shooting Menu 2 ........................76 Formatting the card (Card Setup) .............................76 Restoring default settings (Reset/Myset) ...........................77 Processing options (Picture Mode) ..........................78 Image quality (K) ...................79 Setting the self timer (j/Y) ...79 Varying settings over a series of photographs (bracketing)......80 Recording multiple exposures in a single image (multiple exposure)..................................82 Shooting automatically with a � xed interval (time lapse shooting) ...................................83 Wireless remote control � ash photography..............................84 Digital Zoom (Digital Tele-converter) .............84 HDR photography .....................84

Using the playback menu ..........85 Displaying images rotated (R) ..........................................85 Editing still images ....................85 Canceling all protections ..........87 Using the Smartphone connection option (Connection to Smartphone) .........................87 Using the setup menu ................88 X (Date/time setting) ...............88 W (Changing the display language)..................................88 i (Monitor brightness adjustment) ...............................88 Rec View ..................................88 Wi-Fi Settings ...........................88 c/# Menu Display ..................88 Firmware...................................88 Setting up a wireless LAN connection (Wi-Fi Settings) ......89 Using the custom menus ...........90 R AF/MF ..................................90 S Button/Dial/Lever .................91 T Release/j .........................91 U Disp/8/PC ..........................92 V Exp/p/ISO ..........................93 W # Custom ............................94 X K/Color/WB .......................95 Y Record/Erase .......................96 Z Movie ...................................97 b Built-In EVF ..........................97 k K Utility ..............................98 AEL/AFL ...................................98 MF Assist ..................................99 Button Function ........................99 t Lever Function .................101 Viewing camera images on TV ...........................................101 Choosing the control panel displays (KControl Settings) .................................103 Adding information displays (G/Info Settings) ...................105 Shutter speeds when the � ash � res automatically [# X-Sync.] [# Slow Limit].........................106 AF focus adjustments .............107 Using the accessory port menus ........................................108 Before using the accessory port menus .....................................108 Using OLYMPUS PENPAL .....109 A OLYMPUS PENPAL Share ......................................110 B OLYMPUS PENPAL Album ..................................... 111 C Electronic View� nder ......... 111 Printing pictures 112 Print reservation (DPOF) .........112 Creating a print order..............112 Removing all or selected pictures from the print order ...112 Direct printing (PictBridge) .....113 Easy printing ...........................114 Custom printing ......................114 Connecting the camera to a computer and a smartphone 116 Installing the PC software .......116 Copying pictures to a computer without OLYMPUS Viewer 3 .....118 Using the camera wireless LAN function .............................119 Things you can do with OI.Share .....................................121

Battery, battery charger, and card 122 Battery and charger .................122 Using an optional AC adapter ....122 Using your charger abroad .....122 Usable cards .............................123 Record mode and � le size/ number of storable still pictures .....................................124 Interchangeable lenses 125 M.ZUIKO DIGITAL lens speci� cations ..........................125 Using separately sold accessories 129 Power Battery Holder (HLD-7) ......................................129 External � ash units designated for use with this camera ..........130 Wireless remote control � ash photography............................131 Other external � ash units ........132 Principal Accessories ..............133 System chart .............................134 Information 136 Shooting tips and information ................................136 Error codes ...............................138 Cleaning and storing the camera .......................................140 Cleaning the camera ..............140 Storage ...................................140 Cleaning and checking the image pickup device ...............140 Pixel Mapping - Checking the image processing functions ....141 Menu directory ..........................142 Speci� cations ...........................148 SAFETY PRECAUTIONS 151 SAFETY PRECAUTIONS ..........151 Index 161

Shooting g Taking pictures with automatic settings iAUTO (A) 18 Easy photography with special effects Art � lter (ART) 44 Choosing an aspect ratio Aspect ratio 69 Quickly matching settings to the scene Scene mode (SCN) 45 Pro-level photography made simple Live Guide 28 Adjusting the brightness of a photograph Exposure compensation 49 Taking pictures with a blurred background Live Guide 28 Aperture priority shooting 39 Taking pictures that stop the subject in motion or convey a sense of motion Live Guide 28 Shutter priority shooting 40 Taking pictures with the correct color White balance 56 One-touch white balance 57 Processing pictures to match the subject/ Taking monotone pictures Picture Mode 68 Art � lter (ART) 44 When the camera will not focus on your subject/Focusing on one area Using the touch screen 27 AF Area 52 Zoom frame AF/zoom AF 54 Focusing on a small spot in the frame/ con� rming focus before shooting Zoom frame AF/zoom AF 54 Recomposing photographs after focusing C-AF+TR (AF tracking) 73 Turning off the beep speaker 8 (Beep sound) 93 Taking photos without the � ash ISO/DIS Mode 57/45 Reducing camera shake Image Stabilizer 66 Anti-Shock z 94 Self-timer 55 Remote cable 133 Taking pictures of a subject against backlight Flash shooting 50 Gradation (Picture Mode) 78 Photographing � reworks Bulb/time photography 41 Scene mode (SCN) 45 Reducing image noise (mottling) Noise Reduct. 93 Taking pictures without white subjects appearing too white or black subjects appearing too dark Gradation (Picture Mode) 78 Histogram/ Exposure compensation 37/49 Highlight&Shadow Control 49 Optimizing the monitor/ adjusting monitor hue Monitor brightness adjustment 88 Live View Boost 92 Quick task index

Checking set effect before taking a picture Preview function 100 Test Picture 100 Checking horizontal or vertical orientation before shooting Level gauge 37 Shooting with deliberate composition Displayed Grid 92 Zooming in on photos to check focus Autoq (Rec View) 88 Self-portraits Self-timer 55 Sequential shooting Sequential shooting 55 Extending the useful life of the battery Sleep 93 Increasing the number of pictures that can be taken Record mode 70 Playback/Retouch g Viewing images on a TV HDMI/Video Out 92 Playback on TV 101 Viewing slideshows with background music Slideshow 65 Brightening shadows Shadow Adj (JPEG Edit) 86 Dealing with red-eye Redeye Fix (JPEG Edit) 86 Printing made easy Direct printing 113 Commercial prints Creating a print order 112 Simple photo sharing Share Order 62 Using the camera wireless LAN function 119 OLYMPUS PENPAL 109 Connection to Smartphone 87 Camera Settings g Restoring default settings Reset 77 Saving the settings Myset 77 Changing the menu display language W 88

Unpack the box contents The following items are included with the camera. If anything is missing or damaged, contact the dealer from whom you purchased the camera. Camera Body cap Strap USB cable CB-USB6 • Flash case • Computer software CD-ROM • Instruction manual • Warranty card Flash FL-LM2 Lithium ion battery BLN-1 Lithium ion charger BCN-1 Attaching the strap 1 Thread the strap in the direction of the arrows. 4 3 2 1 2 Lastly, pull the strap tight making sure that it is fastened securely. 5 • Attach the other end of the strap to the other eyelet in the same way.

1 1 Names of parts 1 2 3 4 5 6 7 8 9 0 a b c d f g h i j k l n o m e 1 Mode dial lock .................................P. 18 2 Rear dial*1 (o) .......................P. 23, 38 – 41, 56, 58, 105 3 Fn2 button ................................P. 23, 49 4 H/R (Movie) button ........P. 33/P. 22, 99 5 Front dial*1 (r) .................P. 31, 38 – 41 6 Shutter button .................................P. 21 7 Self-timer lamp/AF illuminator ...............................................P. 55/P. 91 8 Lens attachment mark ....................P. 14 9 Y (One-touch white balance) button ........................................................P. 57 0 Z (Preview) button .........................P. 39 a Mount (Remove the body cap before attaching the lens.) b Mode dial ........................................P. 18 c Stereo microphone .............P. 64, 74, 87 d ON/OFF lever ................................P. 16 e AFm (AF/Metering mode) button (#/w settings*2) ..........P. 50, 71, 72, 73 f jYHDR (Sequential shooting/Self- timer/HDR) button (Bracket settings*2) .............P. 55, 37, 80 g External � ash connector ...............P. 132 h Microphone connector cover i Strap eyelet.......................................P. 9 j Connector cover k Lens release button ........................P. 14 l Lens lock pin m Microphone connector (Third-party commercial microphones can be used. l3.5 stereo mini-plug) n HDMI connector (Type D) .............P. 101 o Multi-connector .............P. 101, 113, 116 *1 In this manual, the r and o icons represent operations performed using the front dial and rear dial. *2 When the lever is set to 2 Preparing the camera and � ow of operations

1 1 7 5 4 8 0 9 a f b c e d g h 6 3 2 i j k l m n 1 Accessory port ..............................P. 108 2 Diopter adjustment dial ...................P. 20 3 u (LV) button ..............................P. 19 4 Monitor (Touch screen) ................................P. 16, 27, 34, 36, 60 5 View� nder ..........................P. 19, 20, 39 6 Eye sensor 7 Eyecup ..........................................P. 133 8 Hot shoe .......................................P. 130 9 AEL/AFL button..................P. 32, 49, 98 0 Lever ..................................P. 38 – 41, 91 a INFO button .............................P. 37, 60 b Fn1 button ......................................P. 52 c Q button ..................................P. 30, 75 d Arrow pad* ......................................P. 31 e MENU button .................................P. 75 f q (Playback) button ................P. 31, 61 g Speaker h � (Erase) button ............................P. 33 i Tripod socket j PBH cover.....................................P. 129 k Battery compartment cover.............P. 12 l Battery compartment lock ...............P. 12 m Card slot cover................................P. 13 n Card slot .........................................P. 13 * In this manual, the FGHI icons represent operations performed using the arrow pad.

1 Charging and inserting the battery 1 Charging the battery. Charging indicator BCN-1 Charging in progress Lights orange Charging complete Off Charging error Blinks orange (Charging time: Up to approximately 4 hours) 1 2 3 AC wall outlet AC cable Lithium ion battery Lithium ion charger Direction indicating mark (�) Charging indicator # Cautions • Unplug the charger when charging is complete. 2 Loading the battery. 3 2 1 Battery compartment lock Battery compartment cover Direction indicating mark 3 Closing the battery cover. Removing the battery Turn off the camera before opening or closing the battery compartment cover. To remove the battery, � rst push the battery lock knob in the direction of the arrow and then remove. # Cautions • Contact an authorized distributor or service center if you are unable to remove the battery. Do not use force. $ Notes • It is recommended to set aside a backup battery for prolonged shooting in case the battery in use drains. • Also read “Battery, battery charger, and card” (P. 122).

1 Inserting and removing cards 1 Loading the card. • Open the card slot cover. • Slide the card in until it is locked into place. g “Usable cards” (P. 123) # Cautions • Turn off the camera before loading or removing the card. 3 2 1 2 Closing the card slot cover. • Close � rmly until you hear a click. # Cautions • Be sure the card slot cover is closed before using the camera. Removing the card Press the inserted card lightly and it will be ejected. Pull out the card. # Cautions • Do not remove the battery or card while the card write indicator (P. 36) is displayed. Eye-Fi Cards Read “Usable cards” (P. 123) before use.

1 Attaching a lens to the camera 1 Attach a lens to the camera. 1 2 Rear cap 2 1 • Align the lens attachment mark (red) on the camera with the alignment mark (red) on the lens, then insert the lens into the camera’s body. • Rotate the lens in the direction indicated by the arrow until you hear it clicks. # Cautions • Make sure the camera is turned off. • Do not press the lens release button. • Do not touch internal portions of the camera. 2 Remove the lens cap. 2 1 1 Using lenses with an UNLOCK switch Retractable lenses with an UNLOCK switch cannot be used while retracted. Turn the zoom ring in the direction of arrow (1) to extend the lens (2). To store, turn the zoom ring in the direction of arrow (4) while sliding the UNLOCK switch (3). 4 1 2 3 Removing the lens from the camera While pressing the lens release button, rotate the lens in the direction of the arrow. 2 1 Lens release button Interchangeable lenses Read “Interchangeable lenses” (P. 125).

1 Attaching the � ash unit 1 Remove the terminal cover from the � ash unit and attach the � ash to the camera. • Slide the � ash unit all the way in, stopping when it contacts the back of the shoe and is securely in place. 2 3 1 2 1 UNLOCK switch 2 To use the � ash, raise the � ash head. • Lower the � ash head when the � ash is not in use. # Cautions • When not using the accessory port, be sure to attach the cover. Removing the Flash Unit Press the UNLOCK switch while removing the � ash unit. 2 1 UNLOCK switch

1 Power on 1 Move the ON/OFF lever to the ON position to turn on the camera. • When the camera is turned on, the monitor will turn on. • To turn off the camera, return the lever to the OFF position. � ON/OFF lever � � Monitor Battery level ; (green): Camera ready to shoot. : (green): Low battery ] (blinks red): Charge the battery. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 R Wi-Fi 2013.10.01 12:30 Using the monitor 2 1 You can adjust the angle of the monitor. Camera sleep operation If no operations are performed for a minute, the camera enters “sleep” (stand-by) mode to turn off the monitor and to cancel all actions. The camera activates again when you touch any button (the shutter button, q button, etc.). The camera will turn off automatically if left in sleep mode for 4 hours. Turn the camera on again before use.

1 Setting the date/time Date and time information is recorded on the card together with the images. The � le name is also included with the date and time information. Be sure to set the correct date and time before using the camera. 1 Display the menus. • Press the MENU button to display the menus. MENU button h 4:3 D 1 2 Shooting Menu 1 Card Setup Reset/Myset Picture Mode Image Aspect Back Set Digital Tele-converter Off 2 Select [X] in the [d] (setup) tab. • Use FG on the arrow pad to select [d] and press I. • Select [X] and press I. --.--.-- --:-- X W j±0 k±0 2 1 Setup Menu English 0.5sec Wi-Fi Settings c/# Menu Display Firmware Rec View Back Set [d] tab 3 Set the date and time. • Use HI to select items. • Use FG to change the selected item. • Use FG to select the date format. X 2013 Y M D Time Cancel Y/M/D The time is displayed using a 24-hour clock. 4 Save settings and exit. • Press Q to set the camera clock and exit to the main menu. • Press the MENU button to exit the menus.

1 Setting the shooting mode Use the mode dial to select the shooting mode. A A full auto mode in which the camera automatically optimizes settings for the current scene. The camera does all the work, which is convenient for beginners. P Aperture and shutter speed are automatically adjusted for optimal results. A You control aperture. You can sharpen or soften background details. S You control shutter speed. You can express the motion of moving subjects, or freeze motion without any blur. M You control aperture and shutter speed. You can shoot with long exposures for � reworks or other dark scenes. ART Select an art � lter. SCN Select a scene according to the subject. J You can shoot a PHOTO STORY. Shoot with selected PHOTO STORY type. n Shoot movies using shutter speed and aperture effects and movie special effects. First, try taking photographs in full auto mode. 1 Press the mode dial lock to release the lock and set the mode dial to A. • When the mode dial lock has been pressed down, the mode dial is locked. Each time you press the mode dial lock, it switches between locked/released. Mode dial lock � � Monitor 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 R Wi-Fi 2013.10.01 12:30 Number of storable still pictures Available recording time ISO sensitivity Shutter speed Aperture value Indicator Mode icon

1 Selecting a shooting method With this camera, you can select between two shooting methods: Shooting using the view� nder and shooting using live view with the monitor. Press the u button to switch between shooting methods. In addition, you can set various shooting functions using the super control panel, live control, and LV super control panel, depending on the shooting method. Shooting using the view� nder � Monitor Lights up when you move your eye away from the view� nder. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 2013.10.01 12:30 R Wi-Fi 0.0 0.0 Super control panel Q Cursor 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 ISO When setting shooting functions, if you press the Q button, a cursor will appear on the super control panel. Touch the function you want to set. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 WB Shooting using live view � Monitor 250 250 F5.6 01:02:03 01:02:03 38 38 L N ISO-A 200 Wi-Fi j 0.0 0.0 FullHD F S-IS AUTO S-IS AUTO Live view display Q WB AUTO WB WB WB AUTO AUTO AUTO AUTO AUTO L N 4:3 WB AUTO WB WB WB AUTO AUTO AUTO P WB Auto AUTO AUTO S-IS AUTO S-IS AUTO FullHD F When setting shooting functions, if you press the Q button, live control will be displayed and you can select a function by turning the rear dial. u button � View� nder Automatically lights up when your eye moves close. When the view� nder is lit up, the monitor turns off. 250 F5.6 0.0 0.0 e ISO-A 200 ISO-A 200 01:02:03 1023 Q AUTO AUTO L N 4:3 WB AUTO WB WB WB AUTO AUTO AUTO WB Auto AUTO AUTO S-IS AUTO S-IS AUTO FullHD F If you press the Q button while the view� nder is lit up, Live Control will be displayed in the view� nder. (During A mode, a live guide is displayed.)

2 2 Shooting Each time you press the u button, you can switch between shooting with the view� nder and shooting with live view. When shooting with the view� nder, the super control panel will be displayed on the monitor. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 R Wi-Fi 2013.10.01 12:30 u button View� nder Super control panel If the display in the view� nder looks blurry Look through the view� nder and rotate the diopter adjustment dial until the display is in sharp focus. Shooting still pictures 1 Set up the camera and decide on the composition. • The view� nder turns on and the monitor turns off automatically when you put your eye to the view� nder. • Be careful that your � ngers or the camera strap do not obstruct the lens. Horizontal grip Vertical grip Shooting using the view� nder

2 2 Lightly press the shutter button down to the � rst position. (Press halfway.) • The AF con� rmation mark (() will be displayed, and a green frame (AF target) will be displayed in the focus location. 250 F5.6 e 01:02:03 1023 ISO-A 200 ISO-A 200 Press the shutter button halfway. AF con� rmation mark Shutter speed Aperture value AF target • The ISO sensitivity, shutter speed and aperture value that have been set automatically by the camera are displayed. • If the AF con� rmation mark blinks, the subject is not in focus. (P. 136) 3 Press the shutter button again to take a picture. (Press all the way down.) • The shutter sounds and the picture is taken. • The shot image will be displayed on the monitor. Pressing the shutter button halfway and all the way down The shutter button has two positions. The act of lightly pressing the shutter button to the � rst position and holding it there is called “pressing the shutter button halfway,” that of pressing it all the way down to the second position “pressing the shutter button all (or the rest of) the way down.” Press halfway Press the rest of the way down # Cautions • You can change the view� nder display style. In this manual, [Style 1] is used. • If the angle of the monitor has been changed, the view� nder will not light up automatically. • If you press and hold down the u button, a menu is displayed that allows you to change the settings for automatically lighting up the view� nder.

2 Recording movies You can record movies in all shooting modes except J (PHOTO STORY). First, try recording in full auto mode. 1 Set the mode dial to A. 2 Press the R button to begin recording. • The image being shot is displayed on the monitor. • If you look through the view� nder, the image being recorded will be displayed. • You can change the focus location by touching the screen while recording (P. 27). R button 3 Press the R button again to end recording. • When shooting is complete, the super control panel will be displayed on the monitor. 00:02:18 00:02:18 R Displayed during recording Recording time # Cautions • When using a camera with a CMOS image sensor, moving objects may appear distorted due to the rolling shutter phenomenon. This is a physical phenomenon whereby distortion occurs in the � lmed image when shooting a fast-moving subject or due to camera shaking. In particular, this phenomenon becomes more noticeable when using a long focal length. • If the camera is used for extended periods, the temperature of the image pickup device will rise and noise and colored fog may appear in images. Turn off the camera for a short time. Noise and colored fog may also appear in images recorded at high ISO sensitivity settings. If the temperature rises further, the camera will turn off automatically. • When using a Four Thirds system lens, the AF will not operate while recording movies. � Taking photographs during movie recording • Press the shutter button during movie recording to pause movie recording and take a photograph. Movie recording restarts after the photograph is taken. Press the R button to end recording. Three � les will be recorded to the memory card: the movie footage preceding the photograph, the photograph itself, and the movie footage following the photograph. • Only one photograph can be taken at a time during movie recording; the self-timer and � ash cannot be used. # Cautions • Image size and quality for photographs are independent of movie frame size. • The autofocus and metering used in movie mode may differ from that used to take photographs. • The R button cannot be used to record movies in the following instances: Multiple exposure (still photography also ends.)/shutter button pressed halfway/during bulb or time photography/sequential shooting/Panorama/SCN mode (e-Portrait, Hand- Held Starlight, 3D)/time lapse shooting

2 Setting shooting functions Using the Multi-function button When framing pictures in the view� nder, you can adjust settings quickly using the multi-function button. At default settings, the Fn2 button is assigned the role of the multi-function button. � Choosing a function 1 Press and hold the Fn2 button and rotate the dial. • The menus are displayed. 2 Keep rotating the dial to select the desired function. • Release the button when the desired function is selected. � Using multifunction options Press the Fn2 button. An option selection dialog will be displayed. [a] assigned to Fn2 button Zoom AF Zoom frame AF Shooting display Fn2 Fn2 250 F5.6 e 01:02:03 1023 ISO-A 200 ISO-A 200 250 F5.6 e 01:02:03 1023 ISO-A 200 ISO-A 200 250 F5.6 e 01:02:03 1023 ISO-A 200 ISO-A 200 Press and hold Q/Fn2 Highlight and shadow control options SHADOW HI LIGHT 250 F5.6 0.0 0.0 e ISO-A 200 ISO-A 200 01:02:03 1023 P 4:3 Aspect ratio options Color Creator option Fn2 Other option assigned to Fn2 button Function Front dial (r) Rear dial (o) b (Highlight and shadow control) (P.49) Highlight control Shadow control c (Color Creator) (P.58) Hue Saturation a (Zoom frame AF/zoom AF) (P.54) Zoom frame AF: Exposure compensation Zoom AF: Zoom in or out d (Image Aspect) (P.69) Select an option

2 Using the super control panel When shooting using the view� nder, the super control panel will be displayed on the monitor. Set your main shooting functions using the super control panel. Super control panel display 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 ISO +2.0 +2.0 R 2 5 3 4 1 6 7 8 9 a 0 c d f e b Settings that can be modi� ed using the super control panel 1 Currently selected option 2 ISO sensitivity .................................P. 57 3 Flash mode .....................................P. 50 4 Flash intensity control .....................P. 71 5 Sequential shooting/self-timer ........P. 55 6 White balance .................................P. 56 White balance compensation 7 Picture mode...................................P. 68 8 Sharpness N..................................P. 78 Contrast J .....................................P. 78 Saturation T .................................P. 78 Gradation z...................................P. 78 B&W Filter x .................................P. 78 Picture tone y ...............................P. 79 9 Color space.....................................P. 95 0 Button function assignment ......P. 91, 99 a Face priority ....................................P. 53 b Metering mode ................................P. 72 c Aspect ratio .....................................P. 69 d Record mode ..................................P. 70 e AF mode .........................................P. 73 AF target .........................................P. 52 f Image stabilizer...............................P. 66 # Cautions • Not displayed in SCN, J, or n modes. 1 Press the Q button. • The cursor appears. 2 Touch the function you wish to set. • The cursor appears over the function you touched. 3 Turn the front dial and select a setting value. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 ISO Cursor $ Notes • You can display menus for each function by selecting a function and pressing Q.

3 3 Shooting You can switch between shooting using the view� nder and shooting using live view by pressing the u button. When shooting using live view, the subject is displayed on the monitor. 250 250 F5.6 01:02:03 01:02:03 38 38 ISO-A 200 Wi-Fi R u button Monitor Shooting still pictures 1 Set up the camera and decide on the composition. • Be careful not to cover the lens with a � nger or the camera strap. 2 Touch the area of the subject you want to focus on. • The camera focuses on the area you touched and automatically takes a photograph. • The recorded image is displayed on the monitor. 250 250 F5.6 01:02:03 01:02:03 38 38 ISO-A 200 Wi-Fi R $ Notes • You can also use the shutter button to take a photograph, just as you would when shooting using the view� nder. • You can also press the shutter button after the camera focuses on the area you touched to take a photograph. g “Using the touch screen” (P. 27) Shooting using live view

3 Recording movies You can record movies in all shooting modes except J (PHOTO STORY). First, try recording in full auto mode. 1 Set the mode dial to A. 2 Press the R button to begin recording. • You can change the focus location by touching the screen while recording (P. 27). R button 3 Press the R button again to end recording. 00:02:18 00:02:18 R Displayed during recording Recording time # Cautions • When using a camera with a CMOS image sensor, moving objects may appear distorted due to the rolling shutter phenomenon. This is a physical phenomenon whereby distortion occurs in the � lmed image when shooting a fast-moving subject or due to camera shaking. In particular, this phenomenon becomes more noticeable when using a long focal length. • If the camera is used for extended periods, the temperature of the image pickup device will rise and noise and colored fog may appear in images. Turn off the camera for a short time. Noise and colored fog may also appear in images recorded at high ISO sensitivity settings. If the temperature rises further, the camera will turn off automatically. • When using a Four Thirds system lens, the AF will not operate while recording movies. � Taking photographs during movie recording • Press the shutter button during movie recording to pause movie recording and take a photograph. Movie recording restarts after the photograph is taken. Press the R button to end recording. Three � les will be recorded to the memory card: the movie footage preceding the photograph, the photograph itself, and the movie footage following the photograph. • Only one photograph can be taken at a time during movie recording; the self-timer and � ash cannot be used. # Cautions • Image size and quality for photographs are independent of movie frame size. • The autofocus and metering used in movie mode may differ from that used to take photographs. • The R button cannot be used to record movies in the following instances: Multiple exposure (still photography also ends.)/shutter button pressed halfway/during bulb or time photography/sequential shooting/Panorama/SCN mode (e-Portrait, Hand- Held Starlight, 3D)/time lapse shooting

3 Using the touch screen When shooting using live view, touch panel functions can be used. Selecting a focusing method You can focus and shoot by tapping the monitor. Tap T to cycle through touch screen settings. 250 250 F5.6 01:02:03 01:02:03 30 30 ISO-A 200 R Wi-Fi U Touch screen operations disabled. T Tap a subject to focus and automatically release the shutter. This function is not available in n mode. V Tap to display an AF target and focus on the subject in the selected area. You can use the touch screen to choose the position and size of the focus frame. Photographs can be taken by pressing the shutter button. � Previewing Your Subject ( V ) 1 Tap the subject in the display. • An AF target will be displayed. • Use the slider to choose the size of the frame. 14 14 10 10 77 5x 5x 250 250 F5.6 ISO-A 200 S-IS AUTO S-IS AUTO 2 Use the slider to choose the size of the target frame, and then tap Y to zoom in on the subject of the target frame. • Use your � nger to scroll the display when the picture is zoomed in. • Tap Z to cancel the zoom display. # Cautions • When using a Four Thirds system lens, the range within which auto focus is possible decreases. If you touch the screen outside of the possible range, the camera shoots without using AF. Using the wireless LAN function You can connect the camera to a smartphone and control the camera over Wi-Fi. To use this function, you must have the relevant app installed on the smartphone. g “Using the camera wireless LAN function” (P. 119), “Things you can do with OI.Share” (P. 121) 250 250 F5.6 01:02:03 01:02:03 30 30 Wi-Fi ISO-A 200 R Wi-Fi

3 Setting shooting functions Using live guides Live guides are available in iAUTO (A) mode. While iAUTO is a full auto mode, live guides make it easy to access a variety of advanced photographic techniques. 1 Set the mode dial to A. 2 Touch the tab to display live guides. • Select a guide item and touch it to set that item. 250 250 F5.6 01:02:03 01:02:03 38 38 ISO-A 200 Wi-Fi R Tab Change Color Saturation Cancel Guide item 3 Use your � nger to position the sliders. • Tap a to enter the setting. • To cancel the live guide setting, tap k on the screen. • If [Shooting Tips] is selected, highlight an item and press Q to view a description. • The effect of the selected level is visible in the display. If [Blur Background] or [Express Motions] is selected, the display will return to normal, but the selected effect will be visible in the � nal photograph. 0 Clear & Vivid Flat & Muted Cancel Set Level bar/selection 4 Shoot. • To clear the live guide from the display, press the MENU button. $ Notes • Live guides can also be used when shooting using the view� nder. When shooting using the view� nder, settings are made using the dial and buttons. If you press the Q button, the live guide is displayed, and the rear dial is used to select items and operate the sliders.

3 # Cautions • If [RAW] is currently selected for image quality, image quality will automatically be set to [YN+RAW]. • Live guide settings are not applied to the RAW copy. • Pictures may appear grainy at some live guide setting levels. • Changes to live guide setting levels may not be visible in the monitor. • Frame rates drop when [Blurred Motion] is selected. • The � ash cannot be used with the live guide. • Changes to live guide options cancel previous changes. • Choosing live guide settings that exceed the limits of the camera exposure meters may result in pictures that are over or underexposed.

3 Using live control When shooting using live view, live control can be used to set functions in P, A, S, M, n, and J modes. Using live control allows you to preview the effects of different settings in the monitor. WB AUTO WB WB WB AUTO AUTO AUTO AUTO AUTO L N 4:3 WB AUTO WB WB WB AUTO AUTO AUTO P WB Auto AUTO AUTO S-IS AUTO S-IS AUTO FullHD F Settings Functions � Available settings Image stabilizer ....................................P. 66 Picture mode ........................................P. 68 Scene mode .........................................P. 45 Art � lter mode .......................................P. 44 n mode ...............................................P. 69 White balance .......................................P. 56 Sequential shooting/self-timer ..............P. 55 Aspect ratio...........................................P. 69 Record mode ........................................P. 70 Flash mode ...........................................P. 50 Flash intensity control ...........................P. 71 Metering mode......................................P. 72 AF mode ...............................................P. 73 ISO sensitivity .......................................P. 57 Face priority ..........................................P. 53 Movie sound record ..............................P. 74 1 Press Q to display the live control. • To hide the live control, press Q again. 2 Use the rear dial to select the settings, use the front dial to change the selected setting, and press Q. • The selected settings take effect automatically if no operations are performed for about 8 seconds. WB AUTO WB WB WB AUTO AUTO AUTO AUTO AUTO L N 4:3 WB AUTO WB WB WB AUTO AUTO AUTO P WB Auto AUTO AUTO S-IS AUTO S-IS AUTO FullHD F Cursor Displays the selected function name Cursor Arrow pad Arrow pad # Cautions • Some items are not available in some shooting modes. $ Notes • Live control can also be used when shooting using the view� nder. If you press the Q button during view� nder display, live control will be displayed in the view� nder. If the view� nder is switched off while shooting is in progress, live control will also be canceled.

4 4 Viewing photographs and movies 1 Press the q button. • Your most recent photograph or movie will be displayed. • Select the desired photograph or movie using the front dial or arrow pad. HI Front dial Displays the previous frame Displays the next frame q button 2013.10.01 12:30 20 100-0020 L N 2013.10.01 12:30 4 100-0004 WB AUTO WB WB WB AUTO AUTO AUTO P HD Still image Movie Index display/Calendar display • To start index playback, turn the rear dial to G during single-frame playback. To start calendar playback, turn the dial a little further. • Turn the rear dial to a to return to single-frame playback. q p q p 2013.10.01 12:30 20 100-0020 L N Index display 2013.10.01 12:30 21 Calendar display 2013.10 Sun Mon Tue Wed Thu Fri Sat 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 3 4 5 6 7 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 3 4 5 6 7 Viewing photographs and movies Q

4 Viewing still images Close-up playback In single-frame playback, turn the rear dial to a to zoom in. Turn to G to return to single- frame playback. 2x 2013.10.01 12:30 20 100-0020 L N Rear dial Watching movies Select a movie and press the Q button to display the playback menu. Select [Movie Play] and press the Q button to begin playback. To interrupt movie playback, press MENU. m Movie Back Movie Play Erase Set Share Order Volume Volume can be adjusted by pressing F or G during single- frame and movie playback. 00:00:02/00:00:14 Protecting images Protect images from accidental deletion. Display an image you wish to protect and press the AEL/AFL button; a 0 (protect) icon will appear on the image. Press the AEL/AFL button again to remove protection. You can also protect multiple selected images. 2013.10.01 12:30 20 100-0020 L N 4:3 0 (protect) icon # Cautions • Formatting the card erases all images even if they have been protected.

4 Erasing images Display an image you want to delete and press the � button. Select [Yes] and press the Q button. � button Erase Back Yes No Set Selecting images Select the image. You can also select multiple images for protection or deletion. Press the H button to select an image; a v icon will appear on the image. Press the H button again to cancel the selection. Press Q to display the delete or protect selection menu. 2013.10.01 12:30 21

4 Using the touch screen You can use the touch panel to manipulate images. � Full-frame playback Viewing additional images • Slide your � nger to the left to view later frames, right to scroll view earlier frames. Playback zoom • Slide the bar up or down to zoom in or out. • Use your � nger to scroll the display when the picture is zoomed in. • Tap P to display index playback. Tap Q again for calendar playback. � Index/Calendar Playback Page ahead/Page back • Slide your � nger up to view the next page, down to view the previous page. • Use Q or R to choose the number of images displayed. • Tap R several times to return to single-frame playback. S Viewing images • Tap an image to view it full frame. Selecting and protecting images In single-frame playback, lightly touch the screen to display the touch menu. You can then perform the desired operation by touching the icons in the touch menu. H Select an image. You can select multiple images for protection. h You can set the images you wish to share over Wi-Fi connection. g [Share Order] (P. 62) 0 Protects an image. # Cautions • The situations in which touch screen operations are not available include the following. Panorama/3D/e-portrait/multiple exposure/during bulb or time photography/one-touch white balance dialog/when buttons or dials are in use • Do not touch the display with your � ngernails or other sharp objects. • Gloves or monitor covers may interfere with touch screen operation. • You can also use the touch screen with the ART, SCN and J menus. Tap an icon to select it.

View� nder display when shooting using the view� nder AEL MY1 250 F5.6 +2.0 +2.0 Hi +7 Sh-3 Hi +7 Sh-3 e ISO-A 200 ISO-A 200 01:02:03 1023 PBH AEL MY1 250 F5.6 +2.0 +2.0 Hi +7 Sh-3 Hi +7 Sh-3 e ISO-A 200 ISO-A 200 01:02:03 1023 PBH AEL MY1 250 F5.6 +2.0 +2.0 Hi +7 Sh-3 Hi +7 Sh-3 e ISO-A 200 ISO-A 200 01:02:03 1023 PBH f g e 1 2 3 4 c b a 0 9 7 6 8 5 d 1 Battery check ; Lit up: Ready for use. : Lit up: Battery is running low. ] Blinks (red) : Charging required. 2 Shooting mode...................P. 18, 38 – 47 3 Myset ..............................................P. 77 4 Available recording time 5 Number of storable still pictures ...P. 124 6 ISO sensitivity .................................P. 57 7 White balance .................................P. 56 8 Highlight and shadow control..........P. 49 9 Top: Flash intensity control .............P. 71 Bottom: Exposure compensation indicator .............................P. 49 0 Exposure compensation value........P. 49 a Aperture value .........................P. 38 – 41 b Shutter speed ..........................P. 38 – 41 c AE Lock u ...................................P. 49 d AF con� rmation mark......................P. 21 e Flash ...............................................P. 50 (blinks: charging in progress) f PBH (displayed when camera is receiving power from power battery holder)...........................................P. 129 g Level gauge (displayed by pressing the shutter button down halfway) ..........P. 37 You can change the view� nder display style. In this manual, [Style 1] is used. g [Built-in EVF Style] (P. 97)

250 250 F5.6 ISO 400 L N 4:3 S-AF S-AF AEL RC BKT +2.0 +2.0 P +7 +7 01:02:03 01:02:03 1023 1023 45 mm 45 mm -3 -3 j R -2.0 -2.0 HD N 1 3 j FPS Wi-Fi FP S-IS S-IS x y z A B C w v u 1 g h i j k l m f e 23 456 9 7 0a b r t q p o s n d c D 8 1 Card write indicator .........................P. 13 2 Wi-Fi connection .....................P. 27, 119 3 Super FP � ash ..............................P. 130 4 RC mode.......................................P. 131 5 Auto bracket/HDRf ...........P. 80/P. 59 6 Multiple exposure............................P. 82 7 High frame rate ...............................P. 93 8 Digital Tele-converter ......................P. 84 9 Time lapse shooting ........................P. 83 0 Face priority ....................................P. 53 a Movie sound ...................................P. 74 b Focal length/Internal temperature warning m ................P. 128/P. 139 c Flash ...............................................P. 50 (blinks: charging in progress, lights up: charging completed) d AF con� rmation mark......................P. 21 e Image stabilizer...............................P. 66 f Art � lter ...........................................P. 44 Scene mode....................................P. 45 Picture mode...................................P. 68 g White balance .................................P. 56 h Sequential shooting/self-timer ........P. 55 i Aspect ratio .....................................P. 69 j Record mode (still images) .............P. 70 k Record mode (movies) ...................P. 71 l Available recording time m Number of storable still pictures ...P. 124 n Highlight&Shadow Control ..............P. 49 o Top: Flash intensity control ......P. 71 Bottom: Exposure compensation indicator............................P. 49 p Exposure compensation value........P. 49 q Aperture value .........................P. 38 – 41 r Shutter speed ..........................P. 38 – 41 s Histogram .......................................P. 37 t AE Lock ..........................................P. 49 u Shooting mode...................P. 18, 38 – 47 v Myset ..............................................P. 77 w Shooting using touch screen operations .......................................P. 27 x Flash intensity control .....................P. 71 y ISO sensitivity .................................P. 57 z AF mode .........................................P. 73 A Metering mode ................................P. 72 B Flash mode .....................................P. 50 C Battery check ; Lit up (green): Ready for use (displayed for about ten seconds after the camera is turned on.) : Lit up (green): Battery is running low. ] Blinks (red): Charging required D Live guide recall ..............................P. 28

You can switch the information displayed in the monitor during shooting using the INFO button. � When shooting using the view� nder Monitor display INFO INFO INFO INFO INFO INFO Super control panel 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 2013.10.01 12:30 R Wi-Fi 0.0 0.0 Level gauge display 250 250 F5.6 P 0.0 0.0 ISO-A 200 Wi-Fi Image only View� nder display Can be switched while looking through the view� nder. INFO INFO Level gauge display INFO INFO INFO INFO 250 F5.6 0.0 0.0 e ISO-A 200 ISO-A 200 01:02:03 1023 INFO INFO Image only Histogram display Information display on 250 F5.6 0.0 0.0 e ISO-A 200 ISO-A 200 01:02:03 1023 S-IS AUTO S-IS AUTO 250 F5.6 0.0 0.0 e ISO-A 200 ISO-A 200 01:02:03 1023 250 F5.6 0.0 0.0 e ISO-A 200 ISO-A 200 01:02:03 1023 L N S-IS AUTO S-IS AUTO FullHD FullHD R � When shooting using Live View INFO Level gauge display INFO INFO 250 250 F5.6 P 0.0 0.0 INFO Image only Histogram display Information display on 01:02:03 01:02:03 38 38 250 250 F5.6 0.0 0.0 R Wi-Fi L N S-IS AUTO S-IS AUTO ISO-A 200 FullHD F 01:02:03 01:02:03 38 38 250 250 F5.6 P 0.0 0.0 R Wi-Fi L N S-IS AUTO S-IS AUTO FullHD FullHD ISO-A 200 Histogram display Display a histogram showing the distribution of brightness in the image. The horizontal axis gives the brightness, the vertical axis the number of pixels of each brightness in the image. Areas above the upper limit at shooting are displayed in red, those below the lower limit in blue, and the area metered using spot metering in green. Level gauge display Indicate the orientation of the camera. The “tilt” direction is indicated on the vertical bar and the “horizon” direction on the horizontal bar. Use the indicators on the level gauge as a guide.

“Point-and-shoot” photography (P program mode) In mode P, the camera automatically adjusts shutter speed and aperture in response to subject brightness. Set the mode dial to P. AEL MY1 250 F5.6 +2.0 +2.0 Hi +7 Sh-3 Hi +7 Sh-3 e ISO-A 200 ISO-A 200 01:02:03 1023 PBH 250 250 F5.6 01:02:03 01:02:03 38 38 L N P ISO-A 200 0.0 0.0 FullHD F R Wi-Fi S-IS AUTO S-IS AUTO Shooting mode Shutter speed Aperture value When shooing using the view� nder When shooting using live view • The functions you can set with the dials depend on the position of the lever. Front dial Lever Rear dial Dial Position of the lever 1 2 r Exposure compensation ISO o Program shift White balance • The shutter speed and aperture selected by the camera are displayed. • The shutter speed and aperture displays will blink if the camera is unable to achieve optimal exposure. Warning display example (blinking) Status Action 60" 60" F2.8 F2.8 The subject is too dark. • Use the � ash. 8000 8000 F22 F22 The subject is too bright. • The metered range of the camera is exceeded. A commercially available ND � lter (for adjusting the amount of light) is required. • The aperture value at the moment when its indication blinks varies with the lens type and focal length of the lens. • When using a � xed [ISO] setting, change the setting. g [ISO] (P. 57) Program shift (%) In P and ART modes, you can choose different combinations of aperture value and shutter speed without altering exposure. “s” appears next to the shooting mode during program shift. To cancel program shift, turn the rear dial until “s” is no longer displayed. # Cautions • Program shift is not available when you are using a � ash. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 2013.10.01 12:30 0.0 0.0 Ps R Wi-Fi Program shift

In mode A, you choose the aperture and let the camera automatically adjust shutter speed for optimal exposure. Rotate the mode dial to A. Front dial Lever Rear dial Dial Position of the lever 1 2 r Exposure compensation ISO o Aperture value White balance • Larger apertures (lower F-numbers) decrease depth of � eld (the area in front of or behind the focus point that appears to be in focus), softening background details. Smaller apertures (higher F-numbers) increase depth of � eld. Aperture value 250 250 F5.6 01:02:03 01:02:03 38 38 L N A 0.0 0.0 ISO 400 FullHD F When shooting using live view Setting the aperture value Reducing aperture value � � Increasing aperture value F2� F3.5� F5.6 �F8.0 �F16 • The shutter speed display will blink if the camera is unable to achieve optimal exposure. Warning display example (blinking) Status Action 30" 30" F5.6 F5.6 The subject is underexposed. • Decrease the aperture value. 8000 8000 F5.6 F5.6 The subject is overexposed. • Increase the aperture value. • If the warning display does not disappear, the metered range of the camera is exceeded. A commercially available ND � lter (for adjusting the amount of light) is required. • The aperture value at the moment when its indication blinks varies with the lens type and focal length of the lens. • When using a � xed [ISO] setting, change the setting. g [ISO] (P. 57) Preview function You can preview the focus range (depth of � eld). While pressing the preview button, the aperture is stopped down to the set aperture value.

In mode S, you choose the shutter speed and let the camera automatically adjust aperture for optimal exposure. Rotate the mode dial to S. Front dial Lever Rear dial Dial Position of the lever 1 2 r Exposure compensation ISO o Shutter speed White balance • A fast shutter speed can freeze a fast action scene without any blur. A slow shutter speed will blur a fast action scene. This blurring will give the impression of dynamic motion. When shooting using live view Shutter speed 250 250 F5.6 01:02:03 01:02:03 38 38 L N S 0.0 0.0 ISO 400 FullHD F Setting the shutter speed Slower shutter speed � � Faster shutter speed 2" � 1" � 15� 60 �100 �400 �1000 • The aperture value display will blink if the camera is unable to achieve optimal exposure. Warning display example (blinking) Status Action 2000 2000 F2.8 F2.8 The subject is underexposed. • Set the shutter speed slower. 125 125 F22 F22 The subject is overexposed. • Set the shutter speed faster. • If the warning display does not disappear, the metered range of the camera is exceeded. A commercially available ND � lter (for adjusting the amount of light) is required. • The aperture value at the moment when its indication blinks varies with the lens type and focal length of the lens. • When using a � xed [ISO] setting, change the setting. g [ISO] (P. 57)

In mode M, you choose both the aperture and the shutter speed. At a speed of BULB, the shutter remains open while the shutter button is pressed. Set the mode dial to M. Front dial Lever Rear dial Dial Position of the lever 1 2 r Aperture value ISO o Shutter speed White balance • Shutter speed can be set to values between 1/8000 and 60 seconds or to [BULB] or [LIVE TIME]. # Cautions • Exposure compensation is not available in M mode. Choosing when the exposure ends (bulb/time photography) Use for night landscapes and � reworks. Shutter speeds of [BULB] and [LIVE TIME] are available in mode M. Bulb photography (BULB): The shutter remains open while the shutter button is pressed. The exposure ends when the shutter button is released. Time photography (TIME): The exposure begins when the shutter button is pressed all the way down. To end the exposure, press the shutter button all the way down again. • When using BULB or TIME, screen brightness is varied automatically. • When using [LIVE TIME], the progress of the exposure will be displayed in the monitor during shooting. The display can also be refreshed by pressing the shutter button halfway. • [Live BULB] (P. 94) can be used to display the image exposure during bulb photography. # Cautions • ISO sensitivity can be set to a value up to ISO 1600 for live bulb and live time photography. • To reduce camera blur during long exposures, mount the camera on a tripod and use a remote cable (P. 133). • The following features are not available during long exposures: Sequential shooting/self-timer shooting/AE bracket shooting/image stabilizer/ � ash bracketing/multiple exposure* * An option other than [Off] is selected for [Live BULB] or [Live TIME] (P. 94). • Even when [Noise Reduct.] is in use, noise may be noticeable in the image displayed on the monitor during shooting. Noise in images While shooting at slow shutter speeds, noise may appear on screen. These phenomena occur when the temperature rises in the image pickup device or image pickup device internal drive circuit, causing current to be generated in those sections of the image pickup device that are not normally exposed to light. This can also occur when shooting with a high ISO setting in a high-temperature environment. To reduce this noise, the camera activates the noise reduction function. g [Noise Reduct.] (P. 93)

Movie mode (n) can be used to � lm movies with special effects. You can create movies that take advantage of the effects available in still photography mode. Use live control to select the settings. g “Adding effects to a movie” (P. 69) You can also apply an after-image effect or zoom in on an area of the image during movie recording. Adding effects to a movie [Movie Effect] 1 Rotate the mode dial to n. 2 Press the R button to begin recording. • Press the R button again to end recording. 3 Touch the on-screen icon of the effect you wish to use. • You can also use the buttons displayed on icons. U Multi Echo Apply an after-image effect. After-images will appear behind moving objects. V One Shot Echo An after-image will appear for a short time after you press the button. The after-image will disappear automatically after a while. T Art Fade Film with the selected picture mode effect. The fade effect is applied to the transition between scenes. M Movie Tele- converter Zoom in on an area of the image without using the lens zoom. Zoom in on the selected position of the image even while the camera is kept � xed. Multi Echo Touch the icon to apply the effect. Touch again to cancel the effect. One Shot Echo Each touch of the icon adds to the effect. Art Fade Touch the icon. Touch the picture mode you wish to use. The effect will be applied when you release your � nger.

• You can change the position of the zoom frame by touching the screen or using FGHI. • Press and hold Q to return the zoom frame to a central position. 2 Touch K or press the Fn2 button to zoom in on the area in the zoom frame. • Touch L or press the Fn2 button to return to the zoom frame. 3 Touch O or press Q to cancel the zoom frame and exit Movie tele- converter mode. # Cautions • The frame rate will drop slightly during recording. • The 2 effects cannot be applied simultaneously. • Use a memory card with an SD speed class of 6 or better. Movie recording may end unexpectedly if a slower card is used. • Taking a photograph during movie recording cancels the effect; the effect does not appear in the photograph. • [e-Portrait], [Diorama] and [Color Creator] cannot be used at the same time as Art Fade. • Movie Tele-converter cannot be used when [Picture Mode] is set to [ART]. • The sound of touch operations and button operations may be recorded. • Besides using touch operations, you can apply effects using the buttons corresponding to the displayed icons.

1 Rotate the mode dial to ART. • A menu of art � lters will be displayed. Select a � lter using FG. • Press Q or press the shutter button halfway to select the highlighted item and exit the art � lter menu. 1 Pop Art � Types of art � lters j Pop Art t Cross Process k Soft Focus u Gentle Sepia l Pale&Light Color v Dramatic Tone m Light Tone Y Key Line n Grainy Film Z Watercolor o Pin Hole u ART BKT (ART bracketing) s Diorama 2 Shoot. • To choose a different setting, press Q to display the art � lter menu. ART bracketing When one shot is taken, images are recorded for each selected art � lter. Press I to choose � lters. Art effects Art � lters can be modi� ed and effects can be added. Pressing I in the art � lter menu displays additional options. Modifying � lters Option I is the original � lter, while options II and on add effects that modify the original � lter. Adding effects* Soft focus, pin-hole, frames, white edges, starlight, � lter, tone, blur * The effects available vary with the selected � lter. # Cautions • If [RAW] is currently selected for image quality, image quality will automatically be set to [YN+RAW]. The art � lter will be applied to the JPEG copy only. • Depending on the subject, tone transitions may be ragged, the effect may be less noticeable, or the image may become more “grainy.” • Some effects may not be visible in live view or during movie recording. • Playback may differ according to the � lters, effects, or movie quality settings applied.

1 Rotate the mode dial to SCN. • A menu of scene menu will be displayed. Select a scene using FG. • Press Q or press the shutter button halfway to select the highlighted item and exit the scene menu. 1 Portrait � � Types of scene modes O Portrait J Macro P e-Portrait r Nature Macro L Landscape Q Candle K Landscape+Portrait R Sunset J Sport T Documents i Hand-Held Starlight s Panorama (P. 46) G Night Scene ( Fireworks U Night+Portrait g Beach & Snow G Children f n Fisheye Effect H High Key w n Wide-Angle I Low Key m n Macro q DIS Mode T 3D Photo 2 Shoot. • To choose a different setting, press Q to display the scene menu. # Cautions • In [e-Portrait] mode, two images are recorded: an unmodi� ed image and a second image to which [e-Portrait] effects have been applied. Recording may take some time. In addition, when the image quality mode is [RAW], the image is recorded in RAW+JPEG. • [n Fisheye Effect], [n Wide-Angle], and [n Macro] are for use with optional converter lenses. • Movies cannot be recorded in [e-Portrait], [Hand-Held Starlight], [Panorama], or [3D Photo] mode. • In [Hand-Held Starlight], 8 frames are shot at one time and then combined. When the image quality mode is [RAW], a JPEG image is combined with the � rst RAW image and recorded in RAW+JPEG. • [3D Photo] is subject to the following limitations. [3D Photo] can be used only with a 3D lens. The camera monitor cannot be used to playback images in 3D. Use a device that supports 3D display. Focus is locked. In addition, � ash and self-timer also cannot be used. Image size is � xed at 1920 × 1080. RAW photography is not available. Frame coverage is not 100%.

to form a panorama. g “Connecting the camera to a computer and a smartphone” (P. 116) 1 Rotate the mode dial to SCN. 2 Select [Panorama] and press Q. 3 Use FGHI to choose a pan direction. 4 Take a picture, using the guides to frame the shot. • Focus, exposure, and other settings are � xed at the values for the � rst shot. 250 250 F5.6 38 M 5 Take the remaining images, framing each shot so that the guides overlap with the previous picture. [ 2 ] 250 250 F5.6 38 M [ 3 ] Exit Exit • A panorama may include up to 10 images. A warning indicator (g) is displayed after the tenth shot. 6 After taking the last shot, press Q to end the series. # Cautions • During panorama shooting, the image previously taken for position alignment will not be displayed. With the frames or other markers for display in the images as a guide, set the composition such that the edges of the overlapping images overlap within the frames. $ Notes • Pressing Q before shooting the � rst frame returns to the scene mode selection menu. Pressing Q in the midst of shooting ends the sequence of panorama shooting, and allows you to continue with the next one.

1 Rotate the mode dial to J. • A PHOTO STORY menu will be displayed. A Standard B Speed C Fun Frames Standard 1 1 2 3 2 Use FG to choose the theme of the PHOTO STORY. • You can choose different effects, number of frames and aspect ratios for each theme. You can also change the aspect ratio, the division pattern and the frame effect of individual images. Changing between variations E Original PHOTO STORY F G H PHOTO STORY with effects and aspect ratios changed from the original PHOTO STORY. The number of images and arrangement of image regions can be altered for each theme of the PHOTO STORY. • You can change the frame color and frame surrounding effect in each variation. • Every theme and variation provides a different PHOTO STORY. 3 After � nishing the settings, press Q. • The monitor switches to PHOTO STORY display. • The subject of current frame is displayed in live view. • Touch any of the masked frames to switch the masked frame to the current frame. • Press the MENU button to change the theme. 4 Shoot an image for the � rst frame. • The image you have shot is displayed in the � rst frame. F5.0 0.0 0.0 1 ISO-A 200 1023 1023 250 250 5 Shoot an image for the next frame. • View and shoot the subject for the next frame. • Press � to cancel the image in the directly preceding frame and retake the shot. • Touch any frame to cancel the image in it and retake the shot. Touch the frame, and then touch O. F5.0 0.0 0.0 1 ISO-A 200 1023 1023 250 250 Next frame (Live view display) Shot image

• Press the MENU button, and you can select other themes. $ Notes • During the shooting of a PHOTO STORY, the following operations are available. Exposure compensation/Program shift/Flash shooting (except when the theme is [Speed].)/Live control settings # Cautions • If the camera is turned off during shooting, all the data for images up to that point is cancelled and nothing is recorded on the memory card. • If [RAW] is currently selected for image quality, image quality will automatically be set to [YN+RAW]. The PHOTO STORY image is saved as JPEG and the images in the frames as RAW. RAW images are saved in [4:3]. • From among the [AF Mode], [S-AF], [MF] and [S-AF+MF] can be set. Also, the AF target is � xed to a single central point. • The metering mode is � xed to digital ESP metering. • The following operations are not available in PHOTO STORY mode. MENU display/Movie/Sequential shooting/Self timer/INFO display/Face priority AF/ Digital Tele-converter/Picture mode • The following button operations are disabled. Fn1/Fn2/INFO etc. • During the shooting of a PHOTO STORY, the camera will not go into sleep mode.

Controlling exposure (exposure compensation) Rotate the front dial to choose exposure compensation. Choose positive (“+”) values to make pictures brighter, negative (“–”) values to make pictures darker. Exposure can be adjusted by ±5.0 EV. Negative (–) No compensation (0) Positive (+) # Cautions • Exposure compensation is not available in A, M, or SCN mode. • The view� nder and live view display can only be changed up to ±3.0EV. If the exposure exceeds ±3.0EV, the exposure bar will begin � ashing. • Movies can be corrected in a range up to ±3.0EV. Changing the brightness of highlights and shadows When the multi-function button is set to [Highlight&Shadow Control], a setting screen will be displayed when you press the Fn2 button. Adjust the shadow using the rear dial and the highlight using the front dial. SHADOW HI LIGHT Locking the exposure (AE Lock) You can lock just the exposure by pressing the AEL/AFL button. Use this when you want to adjust the focus and exposure separately or when you want to shoot several images at the same exposure. • If you press the AEL/AFL button once, the exposure is locked and u is displayed. g “AEL/AFL” (P. 98) • Press the AEL/AFL button once again to release the AE Lock. # Cautions • The lock will be released if you operate the mode dial, MENU button, or Q button.

The � ash can be set manually as required. The � ash can be used for � ash photography in a variety of shooting conditions. 1 Attach the � ash to the camera and raise the light-emitting unit. • g “Attaching the � ash unit” (P. 15) 2 Set the lever to position 2 and press the AFm button. AFm button Lever P Flash Auto AUTO AUTO 0 0.0 When shooting using live view 3 Select a setting using the rear dial and press the Q button. • The options available and the order in which they are displayed vary depending on the shooting mode. g “Flash modes that can be set by shooting mode” (P. 51) AUTO Auto � ash The � ash � res automatically in low light or backlight conditions. # Fill-in � ash The � ash � res regardless of the light conditions. $ Flash off The � ash does not � re. !/#! Red-eye reduction � ash This function allows you to reduce the red-eye phenomenon. In S and M modes, the � ash always � res. #SLOW Slow synchronization (1st curtain) Slow shutter speeds are used to brighten dimly-lit backgrounds. !SLOW Slow synchronization (1st curtain)/Red-eye reduction � ash Combines slow synchronization with red-eye reduction. #SLOW2/ 2nd Curtain Slow synchronization (2nd curtain) The � ash � res just before the shutter closes to create trails of light behind moving light sources. #FULL, #1/4 etc. Manual For users who prefer manual operation. If you press the INFO button, you can use the dial to adjust the � ash level. 4 Press the shutter button all the way.

before the shutter is released. Do not move the camera until shooting is complete. • [!/#!(Red-eye reduction � ash)] may not work effectively under some shooting conditions. • When the � ash � res, the shutter speed is set to 1/320 sec. or slower. When shooting a subject against a bright background with the � ll-in � ash, the background may be overexposed. Flash modes that can be set by shooting mode Shooting mode LV super control panel Flash mode Flash timing Conditions for � ring the � ash Shutter speed limit P/A #AUTO Auto � ash 1st curtain Fires automatically in dark/backlit conditions 1/30 sec. – 1/320 sec.* ! Auto � ash (red-eye reduction) # Fill-in � ash Always � res 30 sec. – 1/320 sec.* $ Flash off k k k ! SLOW Slow synchronization (red-eye reduction) 1st curtain Fires automatically in dark/backlit conditions 60 sec. – 1/320 sec.* #SLOW Slow synchronization (1st curtain) # SLOW2 Slow synchronization (2nd curtain) 2nd curtain S/M # Fill-in � ash 1st curtain Always � res 60 sec. – 1/320 sec.* #! Fill-in � ash (red-eye reduction) $ Flash off k k k # 2nd-C Fill-in � ash/Slow synchronization (2nd curtain) 2nd curtain Always � res 60 sec. – 1/320 sec.* • #AUTO, $ can be set in A mode. * 1/250 sec. when using an separately sold external � ash unit Minimum range The lens may cast shadows over objects close to the camera, causing vignetting, or be too bright even at minimum output. Lens Approximate distance at which vignetting occurs 14 – 42 mm 0.25 m 17 mm 0.25 m 40 – 150 mm 0.9 m 14 – 150 mm 0.5 m 12 – 50 mm 0.45 m 12 – 40 mm 3.2 m (when focal length is 12 mm) 0.7 m (when focal length is 14 mm or above) • External � ash units can be used to prevent vignetting. To prevent photographs from being overexposed, select mode A or M and choose a high f-number, or reduce ISO sensitivity.

Choose which of the 81 autofocus targets will be used for autofocus. 1 Press the arrow pad or Fn1 button to display the AF targets. 2 Rotate the dial to choose the AF position. • “All targets” mode is restored if you move the cursor off the screen. All Targets Single Target All Targets The camera automatically chooses from the full set of focus targets. Select the focus target manually. Differences in target display depending on lens The target display will differ depending on the lens you are using. When using a Micro Four Thirds system lens, 81 AF targets will be displayed. When using a Four Thirds system lens, 37 AF targets will be displayed. Setting the AF target You can change the target selection method and target size. You can also select Face priority AF (P. 53). 1 Press the INFO button during AF target selection and choose a selection method using FG. INFO i o FG i o (All Targets) The camera automatically selects all AF targets. I (Single Target) You select a single AF target. K (Small Target) The AF target can be reduced in size. J (Group Target) The camera automatically chooses from the targets in the selected group. # Cautions • Reverts to “Single Target” when shooting movies.

The camera detects faces and adjusts focus and digital ESP. 1 Press the Fn1 button to display the AF target. 2 Press the INFO button. • You can change the AF target selection method. 3 Use HI to select an option and press Q. i o Selection method J Face Priority Off Face priority off. I Face Priority On Face priority on. K Face & Eye Priority On The autofocus system selects the pupil of the eye closest to the camera for face-priority AF. L Face & R. Eye Priority On The autofocus system selects the pupil of the eye on the right for face-priority AF. M Face & L. Eye Priority On The autofocus system selects the pupil of the eye on the left for face-priority AF. 4 Point the camera at your subject. • When shooting using the view� nder, look through the view� nder. • If a face is detected, it will be indicated by a white border. 5 Press the shutter button halfway to focus. • When the camera focuses on the face in the white border, the border will turn green. • If the camera is able to detect the subject’s eyes, it will display a green frame over the selected eye. (pupil detection AF) 6 Press the shutter button the rest of the way down to shoot. 01:02:03 01:02:03 1023 1023 250 250 F5.6 P 0.0 0.0 R Wi-Fi L N S-IS AUTO S-IS AUTO ISO-A 200 FullHD F 01:02:03 01:02:03 1023 1023 250 250 F5.6 P 0.0 0.0 R Wi-Fi L N S-IS AUTO S-IS AUTO ISO-A 200 FullHD F # Cautions • Face priority applies only to the � rst shot in each sequence taken during sequential shooting. • Depending on the subject and the art � lter setting, the camera may not be able to correctly detect the face. • When set to [p (Digital ESP metering)], metering is performed with priority given to faces. • When using a Four Thirds system lens, even if a face is detected, if it is outside the AF area, the face priority AF will not operate. $ Notes • Face priority is also available in [MF]. Faces detected by the camera are indicated by white frames.

You can zoom in on a portion of the frame when adjusting focus. Choosing a high zoom ratio allows you to use autofocus to focus on a smaller area than is normally covered by the AF target. You can also position the focus target more precisely. 01:02:03 01:02:03 30 30 250 250 F5.6 0.0 0.0 R Wi-Fi L N S-IS AUTO S-IS AUTO ISO-A 200 FullHD F Shooting display 01:02:03 01:02:03 30 30 250 250 F5.6 0.0 0.0 R Wi-Fi L N S-IS AUTO S-IS AUTO ISO-A 200 FullHD F Zoom frame AF Zoom AF U U U Q / U (Press and hold) 1 Assign [U] to one of the buttons in advance using [Button Function] (P. 99). • a can also be set as a multi-function button. 2 Press the U button to display the zoom frame. • If the camera was focused using autofocus just before the button was pressed, the zoom frame will be displayed at the current focus position. • Use FGHI to position the zoom frame. • Press the INFO button and use FG to choose the zoom ratio. Comparison of AF and zoom frames 14× 10× 7× 5× 3 Press the U button again to zoom in on the zoom frame. • Use FGHI to position the zoom frame. • Rotate the dial to choose the zoom ratio. 4 Press the shutter button halfway to initiate autofocus. • The camera will focus using the subject in the frame at the center of the screen. To change the focus position, move it by touching the screen. $ Notes • You can also display and move the zoom frame using touch screen operations. # Cautions • Zoom is visible only in the monitor and has no effect on the resulting photographs. • When you are using a Four Thirds system lens, the AF will not operate with during zoom display.

Keep the shutter button pressed all the way down to take a series of photos. Alternatively, you can take pictures using the self timer. 1 Set the lever to position 1 and press the jYHDR button to display the selection items. 2 Turn the rear dial and select an item. o Single-frame shooting Shoots 1 frame at a time when the shutter button is pressed (normal shooting mode). T Sequential H Photographs are taken at about 10 frames per second (fps) while the shutter button is pressed all the way down. Focus, exposure, and white balance are � xed at the values for the � rst shot in each series ([S-AF], [MF]). S Sequential L Photographs are taken at about 6.5 frames per second (fps) while the shutter button is pressed all the way down. Focus and exposure are � xed according to the options selected for [AF Mode] (P. 73) and [AEL/AFL] (P. 98). Y12s Self-timer 12 SEC Press the shutter button halfway to focus, the rest of the way down to start the timer. First, the self-timer lamp lights up for approximately 10 seconds, then it blinks for approximately 2 seconds and the picture is taken. Y2s Self-timer 2 SEC Press the shutter button halfway to focus, the rest of the way down to start the timer. The self-timer lamp blinks for approximately 2 seconds, and then the picture is taken. YC Self-timer Custom Set the number of frames to be shot. Select g, press the INFO button, and rotate the dial. $ Notes • To cancel the activated self-timer, press the jYHDR button. • In [S-AF] and [MF] focus modes, focus and exposure will be � xed at the values for the � rst frame in each sequence. # Cautions • When you are using S, no con� rmation image is displayed during shooting. The image is displayed again after shooting ends. When you are using T, the image shot immediately before is displayed. • The speed of sequential shooting varies depending on the lens you are using and the focus of the zoom lens. • During sequential shooting, if the battery check blinks due to low battery, the camera stops shooting and starts saving the pictures you have taken on the card. The camera may not save all of the pictures depending on how much battery power remains. • Fix the camera securely on a tripod for self-timer shooting. • If you stand in front of the camera to press the shutter button halfway when using the self- timer, the photograph may be out of focus.

White balance (WB) ensures that white objects in images recorded by the camera appear white. [AUTO] is suitable in most circumstances, but other values can be selected according to the light source when [AUTO] fails to produce the desired results or you wish to introduce a deliberate color cast into your images. 1 Set the lever to position 2, and turn the rear dial to select items. Lever Rear dial WB AUTO WB WB WB AUTO AUTO AUTO ISO-A 200 ISO-A ISO-A ISO-A 200 200 200 AUTO AUTO AUTO AUTO P WB Auto AUTO AUTO AUTO AUTO 250 F5.6 0.0 LOW LOW 200 200 250 250 320 320 400 400 500 500 Recommend WB mode Color temperature Light conditions Auto white balance AUTO k Used for most light conditions (when there is a white portion framed on the monitor). Use this mode for general use. Preset white balance 5 5300K For shooting outdoors on a clear day, or to capture the reds in a sunset or the colors in a � reworks display N 7500K For shooting outdoors in the shadows on a clear day O 6000K For shooting outdoors on a cloudy day 1 3000K For shooting under a tungsten light > 4000K For subjects lit by � uorescent lights U k For underwater photography n 5500K For � ash shooting One-touch white balance (P. 57) P/Q/ W/X Color temperature set by one- touch WB. Choose when a white or gray subject can be used to measure white balance and the subject is under mixed lighting or lit by an unknown type of � ash or other light source. Custom white balance CWB 2000K – 14000K After pressing the INFO button, use HI buttons to select a color temperature and then press Q.

Measure white balance by framing a piece of paper or other white object under the lighting that will be used in the � nal photograph. This is useful when shooting a subject under natural light, as well as under various light sources with different color temperatures. 1 Prepare a neutral-colored paper, such as white or gray. • Frame the object so that it � lls the display and no shadows fall it. 2 Shoot while pressing the Y (one-touch white balance) button. • You can also shoot after selecting P, Q, W, or X from the white balance options screen and then pressing INFO. 3 Select from P, Q, W, or X and register. • If it is already selected in the white balance menu, select [Yes] and press the Q button. • The new value is saved as a preset white balance option. • The new value is stored until one-touch white balance is measured again. Turning the power off does not erase the data. % Tips • If the subject is too bright or too dark or visibly tinted, the message [WB NG Retry] will be displayed and no value will be recorded. Correct the problem and repeat the process from Step 1. ISO sensitivity Increasing ISO sensitivity increases noise (graininess) but allows photographs to be taken when lighting is poor. The setting recommended in most situations is [AUTO], which starts at ISO 200 — a value that balances noise and dynamic range — and then adjusts ISO sensitivity according to shooting conditions. 1 Set the lever to position 2, and turn the front dial to select items. Lever Front dial AUTO The sensitivity is set automatically according to the shooting conditions. LOW, 200 – 25600 Sensitivity is set to the selected value.

You can adjust the color of the subject while looking through the view� nder. Select this function with the multi-function button to use it. Set the multi-function button to c (Color Creator) in advance (P. 23). 1 While looking through the view� nder, press the Fn2 button. • An options screen will be displayed in the view� nder. Fn2 button 2 Set hue using the front dial and saturation using the rear dial. • The settings are stored under picture mode. # Cautions • The white balance is � xed to AUTO. • When the image quality mode is set to [RAW], the image is recorded in RAW+JPEG.

image. You can also shoot several images and perform HDR imaging on a computer (HDR bracketing photography). 1 Set the lever to position 1 and press the jYHDR button to display the selection items. • A menu will be displayed on the screen. HDR button Lever AUTO AUTO o T S S Y12s Y12s Y2s Y2s Yc Yc P HDR OFF OFF 3F 2.0EV 3F 3F 3F 2.0EV 2.0EV 2.0EV HDR1 HDR1 HDR2 HDR2 7F 2.0EV 7F 7F 7F 2.0EV 2.0EV 2.0EV 5F 2.0EV 5F 5F 5F 2.0EV 2.0EV 2.0EV 3F 3.0EV 3F 3F 3F 3.0EV 3.0EV 3.0EV j�Y o When shooting using live view 2 Turn the front dial to select a setting. HDR1 Four shots are taken, each with a different exposure, and the shots are combined into one HDR image inside the camera. HDR2 provides a more impressive image than HDR1. ISO sensitivity is � xed to 200. Also, the slowest available shutter speed is 1 second and the longest available exposure is 4 seconds. HDR2 3F 2.0EV HDR bracketing is performed. Select the number of images and the exposure difference. HDR imaging processing is not performed. 5F 2.0EV 7F 2.0EV 3F 3.0EV 5F 3.0EV 3 Shoot. • When you press the shutter button, the camera automatically shoots the set number of images. • While shooting, a simply composed image will be displayed on the monitor or in the view� nder. # Cautions • In the case of HDR1 and HDR2, exposure compensation is not available. • If you shoot with a slower shutter speed, there may be more noticeable noise. • Attach the camera to a tripod or other stabilizing item and then shoot. • The image displayed on the monitor or in the view� nder while shooting will differ from the HDR-processed image. • In the case of HDR1 and HDR2, the HDR-processed image will be saved as a JPEG � le. When the image quality mode is set to [RAW], the image is recorded in RAW+JPEG. The only image recorded in RAW is the image with suitable exposure. • If set to HDR1/HDR2, the picture mode is � xed to [Natural] and the color setting is � xed to [sRGB]. [Full-time AF] does not operate. • Flash photography, bracketing, multiple exposure and time lapse shooting cannot be used at the same time as HDR photography.

Playback image information Simpli� ed display Overall display F5.6 F5.6 +1.0 +1.0 G+4 G+4 A+4 A+4 Adobe Adobe Natural Natural ISO 400 ISO 400 250 250 +2.0 +2.0 45mm 45mm 1/8 4608×3456 ×10 ×10 3D 4:3 L N 3D 2013.10.01 12:30 15 100-0015 WB AUTO P SD AF ±0 ±0 o l m n p r q k j uts w x h g i v 2013.10.01 12:30 15 100-0015 ×10 ×10 3D 4:3 L N 3D SD f 0 a 4 1 5 789 b d c e 2 3 6 1 Battery check ..................................P. 16 2 Wi-Fi connection .....................P. 27, 119 3 Including GPS information ............P. 121 4 Eye-Fi upload complete ..................P. 98 5 Print reservation Number of prints ...........................P. 112 6 Share order .....................................P. 62 7 Sound record ..................................P. 64 8 Protect ............................................P. 64 9 Image selected ...............................P. 33 0 File number .....................................P. 96 a Frame number b Storage device ..............................P. 123 c Record mode ..................................P. 70 d Aspect ratio .....................................P. 69 e 3D image ........................................P. 45 f Date and time .................................P. 17 g Aspect border .................................P. 69 h AF target .........................................P. 52 i Shooting mode...................P. 18, 38 – 46 j Exposure compensation .................P. 49 k Shutter speed ..........................P. 38 – 41 l Aperture value .........................P. 38 – 41 m Focal length ..................................P. 128 n Flash intensity control .....................P. 71 o White balance compensation p Color space.....................................P. 95 q Picture mode...................................P. 68 r Compression rate ...........................P. 70 s Pixel count ......................................P. 70 t ISO sensitivity .................................P. 57 u White balance .................................P. 56 v AF Focus adjustments ..................P. 107 w Metering mode ................................P. 72 x Histogram .......................................P. 37 Switching the information display You can switch the information displayed in the monitor during playback using the INFO button. F5.6 F5.6 ±0.0 ±0.0 G±10 G±10 A±10 A±10 Adobe Adobe Natural Natural ISO 400 ISO 400 250 250 +2.0 +2.0 45mm 45mm 1/8 4032×3024 ×10 ×10 4:3 L N 2013.10.01 12:30 15 100-0015 WB AUTO P AF ±0 ±0 2013.10.01 12:30 15 100-0015 4:3 L N ×10 ×10 INFO INFO INFO INFO INFO INFO Overall display Simpli� ed display Image only

Press the q button to view pictures full frame. Press the shutter button halfway to return to shooting mode. Index display/calendar display 25 frames Index display Q q p q p Single-frame playback Calendar display 2013.10 Sun Mon Tue Wed Thu Fri Sat 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 3 4 5 6 7 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 3 4 5 6 7 2013.10.01 12:30 21 2013.10.01 12:30 20 100-0020 L N Playback zoom (close-up playback) 2× zoom close-up playback Single-frame playback 14× zoom 2x q q p p 2013.10.01 12:30 20 L N 100-0020 14x Rear dial (o) Zoom in (p)/Index (q) Front dial (r) Previous (t)/Next (s) Operation also available during close-up playback. Arrow pad (FGHI) Single-frame playback: Next (I)/previous (H)/playback volume (FG) Close-up playback: Scroll image You can display the next frame (I) or the previous frame (H) during close-up playback by pressing the INFO button. Index/calendar playback: Highlight image Fn1 Displays a zoom frame. Use touch operations to set the position of the frame and press Fn1 to zoom in. To cancel, press Fn1. INFO View image info H Select picture (P. 33) AEL/AFL Protect picture (P. 32) � Delete picture (P. 33) Q View menus (in calendar playback, press this button to exit to single-frame playback)

You can connect the camera to a smartphone over wireless LAN (P. 119). Once the smartphone is connected, you can use it view images stored on the card, and transfer images between the camera and smartphone. With [Share Order], you can select the images to share in advance. 1 On the playback screen, touch the screen. • A touch menu will be displayed. 2 Select an image using a touch operation or HI and then touch h on the touch menu. • h is displayed on the images selected for sharing. • To cancel the selection, touch h again. 3 Touch the screen to exit [Share Order]. • After an image has been selected for sharing, the selected image will be shared when a Wi-Fi connection is established using [One-Time]. # Cautions • You can set a share order on a maximum around 200 frames. • Not available for [SD] or [HD] movies.

Press Q during playback to display a menu of simple options that can be used in playback mode. JPEG m R Rotate JPEG Edit Back Set Share Order Still image frame Movie frame JPEG Edit, RAW Data Edit g P. 85, 86 � — Image Overlay g P. 87 � — Movie Play — � Share Order gP. 62 � �* 0 (Protect) � � R (Audio recording) � — Rotate � — m (Slideshow) � � Erase � � * Not available for [SD] or [HD] movies. Performing operations on a movie frame (Movie Play) Q Pause or resume playback. • You can perform the following operations while playback is paused. HIor dial Previous/Next Press and hold HI to continue the operation. F Display the � rst frame. G Display the last frame. H/I Advance or rewind a movie. F/G Adjust volume. # Cautions • We recommend using the supplied PC software to play movies on a computer. Before launching the software for the � rst time, connect the camera to the computer.

wish to protect and press Q to display the playback menu. Select [0] and press Q, and then press F to protect the image. Protected images are shown by a 0 (protect) icon. Press G to remove protection. Press Q to save settings and exit. You can also protect multiple selected images. g Selecting images 2013.10.01 12:30 20 100-0020 L N 4:3 0 (protect) icon # Cautions • Formatting the card erases all images even if they have been protected. Audio recording Add an audio recording (up to 30 sec. long) to the current photograph. 1 Display the image to which you want to add an audio recording and press Q. • Audio recording is not available with protected images. • Audio recording is also available in the playback menu. 2 Select [R] and press Q. • To exit without adding a recording, select [No]. JPEG m R Rotate JPEG Edit Back Set Share Order 3 Select [R Start] and press Q to begin recording. • To stop recording part-way through, press Q. 4 Press Q to end recording. • Images with audio recordings are indicated by a H icon. • To delete a recording, select [Erase] in Step 2. R R Start No Erase Back Set Rotate Choose whether to rotate photographs. 1 Play the photograph back and press Q. 2 Select [Rotate] and press Q. 3 Press F to rotate the image counterclockwise, G to rotate it clockwise; the image rotates each time the button is pressed. • Press Q to save settings and exit. • The rotated image is saved in its current orientation. • Movies, 3D photos, and protected images cannot be rotated.

1 Press Q during playback and select [m]. JPEG m R Rotate JPEG Edit Back Set Share Order 2 Adjust settings. Start Start the slideshow. Images are displayed in order, starting with the current picture. BGM Set BGM or turn BGM [Off]. Slide Set type of slideshow to execute. Slide Interval Choose the length of time each slide is displayed from 2 to 10 seconds. Movie Interval Select [Full] to include full-length movie clips in the slideshow, [Short] to include only the opening portion of each clip. 3 Select [Start] and press Q. • The slideshow will start. • Press Q to stop the slideshow. Volume Press FG during the slideshow to adjust the overall volume of the camera speaker. Press HI to adjust the balance between the background music and the sound recorded with photographs or movies. $ Notes • You can change [Joy] to different BGM. Record the data downloaded from the Olympus website onto the card, select [Joy] from [BGM] in step 2, and press I. Visit the following website for the download. http://support.olympus-imaging.com/bgmdownload/

6 6 Using shooting options Reducing camera shake (image stabilizer) You can reduce the amount of camera shake that can occur when shooting in low light situations or shooting with high magni� cation. The image stabilizer starts when you press the shutter button halfway. 1 Press the Q button and select the image stabilizer. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 IS Mode When shooting using the view� nder When shooting using live view WB AUTO WB WB WB AUTO AUTO AUTO L N 4:3 j WB AUTO WB WB WB AUTO AUTO AUTO mm 50 mm 50 S-IS S-IS S-IS S-IS OFF OFF S-IS AUTO S-IS AUTO S-IS AUTO S-IS AUTO S-IS S-IS FullHD F P Focal Length Auto 2 Select an item using the front dial and press the Q button. Still picture OFF S-I.S. Off Image stabilizer is off. S-IS1 Auto Image stabilizer is on. S-IS2 Vertical IS Image stabilization applies only to vertical (Y) camera shake. Use when panning the camera horizontally. S-IS3 Horizontal IS Image stabilization applies only to horizontal (Z) camera shake. Use when panning the camera horizontally with the camera held in portrait orientation. S-IS AUTO Landscape Panning I.S. The camera detects the panning direction and applies the appropriate image stabilization. Movie OFF M-I.S. Off Image stabilizer is off. ON Movie-I.S. In addition to Auto image stabilization, camera shake that occurs when shooting while walking is also reduced. Choosing a focal length (Micro Four Thirds/Four Thirds System lenses excluded) Use focal length information to reduce camera shake when shooting with lenses that are not Micro Four Thirds or Four Thirds system lenses. • Select [Image Stabilizer], press the INFO button, use HI to select a focal length, and press Q. • Choose a focal length between 8 mm and 1000 mm. • Choose the value that most closely matches to the one that is printed on the lens.

6 # Cautions • The image stabilizer cannot correct excessive camera shake or camera shake that occurs when the shutter speed is set to the slowest speed. In these cases, it is recommended that you use a tripod. • When using a tripod, set [Image Stabilizer] to [OFF]. • When using a lens with an image stabilization function switch, priority is given to the lens side setting. • When priority is being given to the lens side image stabilization and the camera side is set to [S-IS-AUTO], [S-IS1] is used instead of [S-IS-AUTO]. • You may notice an operating sound or vibration when the image stabilizer is activated.

6 Processing options (picture mode) Select a picture mode and make individual adjustments to contrast, sharpness, and other parameters (P. 78). Changes to each picture mode are stored separately. 1 Press the Q button and select [Picture Mode]. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 Picture Mode When shooting using the view� nder When shooting using live view P Natural WB AUTO WB WB WB AUTO AUTO AUTO L N 4:3 M C j i h j j 4 j 5 S-IS AUTO S-IS AUTO FullHD F 2 Select an item using the front dial and press the Q button. h i-Enhance Produces more impressive-looking results suited to the scene. i Vivid Produces vivid colors. j Natural Produces natural colors. Z Muted Produces � at tones. a Portrait Produces beautiful skin tones. J Monotone Produces black and white tone. K Custom Select one picture mode, set the parameters, and register the setting. v e-Portrait Produces smooth skin textures. Cannot be used with bracket photography or when shooting movies. c Color Creator Produces colors set using color creator (P. 58). j Pop Art Choose an art � lter and select the desired effect. k Soft Focus l Pale&Light Color m Light Tone n Grainy Film o Pin Hole s Diorama t Cross Process u Gentle Sepia v Dramatic Tone Y Key Line Z Watercolor