Olympus E-M1 Instruction Manual

Quick task index 1. Preparing the camera and flow of operations 2. Shooting using the viewfinder 3. Shooting using live view 4. Viewing photographs and movies 5. Basic operations 6. Using shooting options 7. Menu functions 8. Printing pictures 9. Connecting the camera to a computer and a smartphone 10. Battery, battery charger, and card 11. Interchangeable lenses 12. Using separately sold accessories 13. Information 14. SAFETY PRECAUTIONS Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. We recommend that you take test shots to get accustomed to your camera before taking important photographs. The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. The contents in this manual are based on firmware version 1.0 for this camera. If there are additions and/or modifications of functions due to firmware update for the camera, the contents will differ. For the latest information, please visit the Olympus website. Instruction Manual DIGITAL CAMERA

North America. Information for Your Safety IMPORTANT SAFETY INSTRUCTIONS When using your photographic equipment, basic safety precautions should always be followed, including the following: • Read and understand all instructions before using. • Close supervision is necessary when any fl ash is used by or near children. Do not leave fl ash unattended while in use. • Care must be taken as burns can occur from touching hot parts. • Do not operate if the fl ash has been dropped or damaged - until it has been examined by qualifi ed service personnel. • Let fl ash cool completely before putting away. • To reduce the risk of electric shock, do not immerse this fl ash in water or other liquids. • To reduce the risk of electric shock, do not disassemble this fl ash, but take it to qualifi ed service personnel when service or repair work is required. Incorrect reassembly can cause electric shock when the fl ash is used subsequently. • The use of an accessory attachment not recommended by the manufacturer may cause a risk of fi re, electric shock, or injury to persons. SAVE THESE INSTRUCTIONS Indications used in this manual The following symbols are used throughout this manual. # Cautions Important information on factors which may lead to a malfunction or operational problems. Also warns of operations that should be absolutely avoided. $ Notes Points to note when using the camera. % Tips Useful information and hints that will help you get the most out of your camera. g Reference pages describing details or related information.

Quick task index 7 Unpack the box contents .............9 Preparing the camera and fl ow of operations 10 Names of parts ...........................10 Charging and inserting the battery .........................................12 Inserting and removing cards ...13 Attaching a lens to the camera .........................................14 Attaching the fl ash unit .............15 Power on .....................................16 Setting the date/time ..................17 Setting the shooting mode ........18 Selecting a shooting method ....19 Shooting using the viewfi nder 20 Shooting ......................................20 Shooting still pictures................20 Recording movies .....................22 Setting shooting functions ........23 Using the Multi-function button........................................23 Using the super control panel ...24 Shooting using live view 25 Shooting ......................................25 Shooting still pictures................25 Recording movies .....................26 Using the touch screen ..............27 Selecting a focusing method ....27 Using the wireless LAN function .....................................27 Setting shooting functions ........28 Using live guides ......................28 Using live control .......................30 Viewing photographs and movies 31 Viewing photographs and movies .........................................31 Index display/Calendar display ......................................31 Viewing still images ..................32 Watching movies ......................32 Volume......................................32 Protecting images .....................32 Erasing images .........................33 Selecting images ......................33 Using the touch screen ..............34 Selecting and protecting images ......................................34 Basic operations 35 Information displays while shooting ......................................35 Viewfi nder display when shooting using the viewfi nder ..................35 Monitor display when shooting using live view ..........................36 Switching the information display ......................................37 Using the shooting modes ........38 “Point-and-shoot” photography (P program mode) ....................38 Choosing aperture (A aperture-priority mode) .......39 Choosing shutter speed (S shutter-priority mode) ..........40 Choosing aperture and shutter speed (M manual mode) ..........41 Table of Contents

Using movie mode (n) ............42 Adding effects to a movie [Movie Effect] ............................42 Using art fi lters..........................44 Shooting in scene mode ...........45 Using PHOTO STORY .............47 Commonly used shooting options ........................................49 Controlling exposure (exposure compensation) .........49 Changing the brightness of highlights and shadows ............49 Locking the exposure (AE Lock) ..................................49 Using a fl ash (fl ash photography)...................50 Choosing a focus target (AF Area) ..................................52 Setting the AF target .................52 Face priority AF/pupil detection AF .............................................53 Zoom frame AF/zoom AF..........54 Sequential shooting/using the self timer ...................................55 Adjusting color (white balance) .........................56 ISO sensitivity ...........................57 Controlling color (Color Creator)..........................58 HDR photography .....................59 Information display during playback ......................................60 Playback image information .....60 Switching the information display ......................................60 Changing the playback information display method.......61 Sharing images over Wi-Fi connection (Share Order) .........62 Manipulating playback images ......................................63 Using shooting options 66 Reducing camera shake (image stabilizer) ......................66 Processing options (picture mode) ..........................68 Adding effects to a movie .........69 Setting the image aspect ..........69 Image quality (record mode).....70 Adjusting fl ash output (fl ash intensity control)..............71 Choosing how the camera measures brightness (metering) .................................72 Choosing a focus mode (AF mode).................................73 Movie sound options (recording sound with movies) ...................74 Menu functions 75 Basic menu operations ..............75 Using Shooting Menu 1/ Shooting Menu 2 ........................76 Formatting the card (Card Setup) .............................76 Restoring default settings (Reset/Myset) ...........................77 Processing options (Picture Mode) ..........................78 Image quality (K) ...................79 Setting the self timer (j/Y) ...79 Varying settings over a series of photographs (bracketing)......80 Recording multiple exposures in a single image (multiple exposure)..................................82 Shooting automatically with a fi xed interval (time lapse shooting) ...................................83 Wireless remote control fl ash photography..............................84 Digital Zoom (Digital Tele-converter) .............84 HDR photography .....................84

Using the playback menu ..........85 Displaying images rotated (R) ..........................................85 Editing still images ....................85 Canceling all protections ..........87 Using the Smartphone connection option (Connection to Smartphone) .........................87 Using the setup menu ................88 X (Date/time setting) ...............88 W (Changing the display language)..................................88 i (Monitor brightness adjustment) ...............................88 Rec View ..................................88 Wi-Fi Settings ...........................88 c/# Menu Display ..................88 Firmware...................................88 Setting up a wireless LAN connection (Wi-Fi Settings) ......89 Using the custom menus ...........90 R AF/MF ..................................90 S Button/Dial/Lever .................91 T Release/j .........................91 U Disp/8/PC ..........................92 V Exp/p/ISO ..........................93 W # Custom ............................94 X K/Color/WB .......................95 Y Record/Erase .......................96 Z Movie ...................................97 b Built-In EVF ..........................97 k K Utility ..............................98 AEL/AFL ...................................98 MF Assist ..................................99 Button Function ........................99 t Lever Function .................101 Viewing camera images on TV ...........................................101 Choosing the control panel displays (KControl Settings) .................................103 Adding information displays (G/Info Settings) ...................105 Shutter speeds when the fl ash fi res automatically [# X-Sync.] [# Slow Limit].........................106 AF focus adjustments .............107 Using the accessory port menus ........................................108 Before using the accessory port menus .....................................108 Using OLYMPUS PENPAL .....109 A OLYMPUS PENPAL Share ......................................110 B OLYMPUS PENPAL Album ..................................... 111 C Electronic Viewfi nder ......... 111 Printing pictures 112 Print reservation (DPOF) .........112 Creating a print order..............112 Removing all or selected pictures from the print order ...112 Direct printing (PictBridge) .....113 Easy printing ...........................114 Custom printing ......................114 Connecting the camera to a computer and a smartphone 116 Installing the PC software .......116 Copying pictures to a computer without OLYMPUS Viewer 3 .....118 Using the camera wireless LAN function .............................119 Things you can do with OI.Share .....................................121

Battery, battery charger, and card 122 Battery and charger .................122 Using an optional AC adapter ....122 Using your charger abroad .....122 Usable cards .............................123 Record mode and fi le size/ number of storable still pictures .....................................124 Interchangeable lenses 125 M.ZUIKO DIGITAL lens specifi cations ..........................125 Using separately sold accessories 129 Power Battery Holder (HLD-7) ......................................129 External fl ash units designated for use with this camera ..........130 Wireless remote control fl ash photography............................131 Other external fl ash units ........132 Principal Accessories ..............133 System chart .............................134 Information 136 Shooting tips and information ................................136 Error codes ...............................138 Cleaning and storing the camera .......................................140 Cleaning the camera ..............140 Storage ...................................140 Cleaning and checking the image pickup device ...............140 Pixel Mapping - Checking the image processing functions ....141 Menu directory ..........................142 Specifi cations ...........................148 SAFETY PRECAUTIONS 151 SAFETY PRECAUTIONS ..........151 Index 161

Shooting g Taking pictures with automatic settings iAUTO (A) 18 Easy photography with special effects Art fi lter (ART) 44 Choosing an aspect ratio Aspect ratio 69 Quickly matching settings to the scene Scene mode (SCN) 45 Pro-level photography made simple Live Guide 28 Adjusting the brightness of a photograph Exposure compensation 49 Taking pictures with a blurred background Live Guide 28 Aperture priority shooting 39 Taking pictures that stop the subject in motion or convey a sense of motion Live Guide 28 Shutter priority shooting 40 Taking pictures with the correct color White balance 56 One-touch white balance 57 Processing pictures to match the subject/ Taking monotone pictures Picture Mode 68 Art fi lter (ART) 44 When the camera will not focus on your subject/Focusing on one area Using the touch screen 27 AF Area 52 Zoom frame AF/zoom AF 54 Focusing on a small spot in the frame/ confi rming focus before shooting Zoom frame AF/zoom AF 54 Recomposing photographs after focusing C-AF+TR (AF tracking) 73 Turning off the beep speaker 8 (Beep sound) 93 Taking photos without the fl ash ISO/DIS Mode 57/45 Reducing camera shake Image Stabilizer 66 Anti-Shock z 94 Self-timer 55 Remote cable 133 Taking pictures of a subject against backlight Flash shooting 50 Gradation (Picture Mode) 78 Photographing fi reworks Bulb/time photography 41 Scene mode (SCN) 45 Reducing image noise (mottling) Noise Reduct. 93 Taking pictures without white subjects appearing too white or black subjects appearing too dark Gradation (Picture Mode) 78 Histogram/ Exposure compensation 37/49 Highlight&Shadow Control 49 Optimizing the monitor/ adjusting monitor hue Monitor brightness adjustment 88 Live View Boost 92 Quick task index

Checking set effect before taking a picture Preview function 100 Test Picture 100 Checking horizontal or vertical orientation before shooting Level gauge 37 Shooting with deliberate composition Displayed Grid 92 Zooming in on photos to check focus Autoq (Rec View) 88 Self-portraits Self-timer 55 Sequential shooting Sequential shooting 55 Extending the useful life of the battery Sleep 93 Increasing the number of pictures that can be taken Record mode 70 Playback/Retouch g Viewing images on a TV HDMI/Video Out 92 Playback on TV 101 Viewing slideshows with background music Slideshow 65 Brightening shadows Shadow Adj (JPEG Edit) 86 Dealing with red-eye Redeye Fix (JPEG Edit) 86 Printing made easy Direct printing 113 Commercial prints Creating a print order 112 Simple photo sharing Share Order 62 Using the camera wireless LAN function 119 OLYMPUS PENPAL 109 Connection to Smartphone 87 Camera Settings g Restoring default settings Reset 77 Saving the settings Myset 77 Changing the menu display language W 88

Unpack the box contents The following items are included with the camera. If anything is missing or damaged, contact the dealer from whom you purchased the camera. Camera Body cap Strap USB cable CB-USB6 • Flash case • Computer software CD-ROM • Instruction manual • Warranty card Flash FL-LM2 Lithium ion battery BLN-1 Lithium ion charger BCN-1 Attaching the strap 1 Thread the strap in the direction of the arrows. 4 3 2 1 2 Lastly, pull the strap tight making sure that it is fastened securely. 5 • Attach the other end of the strap to the other eyelet in the same way.

1 1 Names of parts 1 2 3 4 5 6 7 8 9 0 a b c d f g h i j k l n o m e 1 Mode dial lock .................................P. 18 2 Rear dial*1 (o) .......................P. 23, 38 – 41, 56, 58, 105 3 Fn2 button ................................P. 23, 49 4 H/R (Movie) button ........P. 33/P. 22, 99 5 Front dial*1 (r) .................P. 31, 38 – 41 6 Shutter button .................................P. 21 7 Self-timer lamp/AF illuminator ...............................................P. 55/P. 91 8 Lens attachment mark ....................P. 14 9 Y (One-touch white balance) button ........................................................P. 57 0 Z (Preview) button .........................P. 39 a Mount (Remove the body cap before attaching the lens.) b Mode dial ........................................P. 18 c Stereo microphone .............P. 64, 74, 87 d ON/OFF lever ................................P. 16 e AFm (AF/Metering mode) button (#/w settings*2) ..........P. 50, 71, 72, 73 f jYHDR (Sequential shooting/Self- timer/HDR) button (Bracket settings*2) .............P. 55, 37, 80 g External fl ash connector ...............P. 132 h Microphone connector cover i Strap eyelet.......................................P. 9 j Connector cover k Lens release button ........................P. 14 l Lens lock pin m Microphone connector (Third-party commercial microphones can be used. l3.5 stereo mini-plug) n HDMI connector (Type D) .............P. 101 o Multi-connector ............. P. 101, 113, 116 *1 In this manual, the r and o icons represent operations performed using the front dial and rear dial. *2 When the lever is set to 2 Preparing the camera and fl ow of operations

1 1 7 5 4 8 0 9 a f b c e d g h 6 3 2 i j k l m n 1 Accessory port ..............................P. 108 2 Diopter adjustment dial ...................P. 20 3 u (LV) button ..............................P. 19 4 Monitor (Touch screen) ................................P. 16, 27, 34, 36, 60 5 Viewfi nder ..........................P. 19, 20, 39 6 Eye sensor 7 Eyecup ..........................................P. 133 8 Hot shoe .......................................P. 130 9 AEL/AFL button..................P. 32, 49, 98 0 Lever ..................................P. 38 – 41, 91 a INFO button .............................P. 37, 60 b Fn1 button ......................................P. 52 c Q button ..................................P. 30, 75 d Arrow pad* ......................................P. 31 e MENU button .................................P. 75 f q (Playback) button ................P. 31, 61 g Speaker h  (Erase) button ............................P. 33 i Tripod socket j PBH cover.....................................P. 129 k Battery compartment cover.............P. 12 l Battery compartment lock ...............P. 12 m Card slot cover................................P. 13 n Card slot .........................................P. 13 * In this manual, the FGHI icons represent operations performed using the arrow pad.

1 Charging and inserting the battery 1 Charging the battery. Charging indicator BCN-1 Charging in progress Lights orange Charging complete Off Charging error Blinks orange (Charging time: Up to approximately 4 hours) 1 2 3 AC wall outlet AC cable Lithium ion battery Lithium ion charger Direction indicating mark () Charging indicator # Cautions • Unplug the charger when charging is complete. 2 Loading the battery. 3 2 1 Battery compartment lock Battery compartment cover Direction indicating mark 3 Closing the battery cover. Removing the battery Turn off the camera before opening or closing the battery compartment cover. To remove the battery, fi rst push the battery lock knob in the direction of the arrow and then remove. # Cautions • Contact an authorized distributor or service center if you are unable to remove the battery. Do not use force. $ Notes • It is recommended to set aside a backup battery for prolonged shooting in case the battery in use drains. • Also read “Battery, battery charger, and card” (P. 122).

1 Inserting and removing cards 1 Loading the card. • Open the card slot cover. • Slide the card in until it is locked into place. g “Usable cards” (P. 123) # Cautions • Turn off the camera before loading or removing the card. 3 2 1 2 Closing the card slot cover. • Close fi rmly until you hear a click. # Cautions • Be sure the card slot cover is closed before using the camera. Removing the card Press the inserted card lightly and it will be ejected. Pull out the card. # Cautions • Do not remove the battery or card while the card write indicator (P. 36) is displayed. Eye-Fi Cards Read “Usable cards” (P. 123) before use.

1 Attaching a lens to the camera 1 Attach a lens to the camera. 1 2 Rear cap 2 1 • Align the lens attachment mark (red) on the camera with the alignment mark (red) on the lens, then insert the lens into the camera’s body. • Rotate the lens in the direction indicated by the arrow until you hear it clicks. # Cautions • Make sure the camera is turned off. • Do not press the lens release button. • Do not touch internal portions of the camera. 2 Remove the lens cap. 2 1 1 Using lenses with an UNLOCK switch Retractable lenses with an UNLOCK switch cannot be used while retracted. Turn the zoom ring in the direction of arrow (1) to extend the lens (2). To store, turn the zoom ring in the direction of arrow (4) while sliding the UNLOCK switch (3). 4 1 2 3 Removing the lens from the camera While pressing the lens release button, rotate the lens in the direction of the arrow. 2 1 Lens release button Interchangeable lenses Read “Interchangeable lenses” (P. 125).

1 Attaching the fl ash unit 1 Remove the terminal cover from the fl ash unit and attach the fl ash to the camera. • Slide the fl ash unit all the way in, stopping when it contacts the back of the shoe and is securely in place. 2 3 1 2 1 UNLOCK switch 2 To use the fl ash, raise the fl ash head. • Lower the fl ash head when the fl ash is not in use. # Cautions • When not using the accessory port, be sure to attach the cover. Removing the Flash Unit Press the UNLOCK switch while removing the fl ash unit. 2 1 UNLOCK switch

1 Power on 1 Move the ON/OFF lever to the ON position to turn on the camera. • When the camera is turned on, the monitor will turn on. • To turn off the camera, return the lever to the OFF position.  ON/OFF lever   Monitor Battery level ; (green): Camera ready to shoot. : (green): Low battery ] (blinks red): Charge the battery. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 R Wi-Fi 2013.10.01 12:30 Using the monitor 2 1 You can adjust the angle of the monitor. Camera sleep operation If no operations are performed for a minute, the camera enters “sleep” (stand-by) mode to turn off the monitor and to cancel all actions. The camera activates again when you touch any button (the shutter button, q button, etc.). The camera will turn off automatically if left in sleep mode for 4 hours. Turn the camera on again before use.

1 Setting the date/time Date and time information is recorded on the card together with the images. The fi le name is also included with the date and time information. Be sure to set the correct date and time before using the camera. 1 Display the menus. • Press the MENU button to display the menus. MENU button h 4:3 D 1 2 Shooting Menu 1 Card Setup Reset/Myset Picture Mode Image Aspect Back Set Digital Tele-converter Off 2 Select [X] in the [d] (setup) tab. • Use FG on the arrow pad to select [d] and press I. • Select [X] and press I. --.--.-- --:-- X W j±0 k±0 2 1 Setup Menu English 0.5sec Wi-Fi Settings c/# Menu Display Firmware Rec View Back Set [d] tab 3 Set the date and time. • Use HI to select items. • Use FG to change the selected item. • Use FG to select the date format. X 2013 Y M D Time Cancel Y/M/D The time is displayed using a 24-hour clock. 4 Save settings and exit. • Press Q to set the camera clock and exit to the main menu. • Press the MENU button to exit the menus.

1 Setting the shooting mode Use the mode dial to select the shooting mode. A A full auto mode in which the camera automatically optimizes settings for the current scene. The camera does all the work, which is convenient for beginners. P Aperture and shutter speed are automatically adjusted for optimal results. A You control aperture. You can sharpen or soften background details. S You control shutter speed. You can express the motion of moving subjects, or freeze motion without any blur. M You control aperture and shutter speed. You can shoot with long exposures for fi reworks or other dark scenes. ART Select an art fi lter. SCN Select a scene according to the subject. J You can shoot a PHOTO STORY. Shoot with selected PHOTO STORY type. n Shoot movies using shutter speed and aperture effects and movie special effects. First, try taking photographs in full auto mode. 1 Press the mode dial lock to release the lock and set the mode dial to A. • When the mode dial lock has been pressed down, the mode dial is locked. Each time you press the mode dial lock, it switches between locked/released. Mode dial lock   Monitor 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 R Wi-Fi 2013.10.01 12:30 Number of storable still pictures Available recording time ISO sensitivity Shutter speed Aperture value Indicator Mode icon

1 Selecting a shooting method With this camera, you can select between two shooting methods: Shooting using the viewfi nder and shooting using live view with the monitor. Press the u button to switch between shooting methods. In addition, you can set various shooting functions using the super control panel, live control, and LV super control panel, depending on the shooting method. Shooting using the viewfi nder  Monitor Lights up when you move your eye away from the viewfi nder. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 2013.10.01 12:30 R Wi-Fi 0.0 0.0 Super control panel Q Cursor 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 ISO When setting shooting functions, if you press the Q button, a cursor will appear on the super control panel. Touch the function you want to set. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 WB Shooting using live view  Monitor 250 250 F5.6 01:02:03 01:02:03 38 38 L N ISO-A 200 Wi-Fi j 0.0 0.0 FullHD F S-IS AUTO S-IS AUTO Live view display Q WB AUTO WB WB WB AUTO AUTO AUTO AUTO AUTO L N 4:3 WB AUTO WB WB WB AUTO AUTO AUTO P WB Auto AUTO AUTO S-IS AUTO S-IS AUTO FullHD F When setting shooting functions, if you press the Q button, live control will be displayed and you can select a function by turning the rear dial. u button  Viewfi nder Automatically lights up when your eye moves close. When the viewfi nder is lit up, the monitor turns off. 250 F5.6 0.0 0.0 e ISO-A 200 ISO-A 200 01:02:03 1023 Q AUTO AUTO L N 4:3 WB AUTO WB WB WB AUTO AUTO AUTO WB Auto AUTO AUTO S-IS AUTO S-IS AUTO FullHD F If you press the Q button while the viewfi nder is lit up, Live Control will be displayed in the viewfi nder. (During A mode, a live guide is displayed.)

2 2 Shooting Each time you press the u button, you can switch between shooting with the viewfi nder and shooting with live view. When shooting with the viewfi nder, the super control panel will be displayed on the monitor. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 R Wi-Fi 2013.10.01 12:30 u button Viewfi nder Super control panel If the display in the viewfi nder looks blurry Look through the viewfi nder and rotate the diopter adjustment dial until the display is in sharp focus. Shooting still pictures 1 Set up the camera and decide on the composition. • The viewfi nder turns on and the monitor turns off automatically when you put your eye to the viewfi nder. • Be careful that your fi ngers or the camera strap do not obstruct the lens. Horizontal grip Vertical grip Shooting using the viewfi nder

2 2 Lightly press the shutter button down to the fi rst position. (Press halfway.) • The AF confi rmation mark (() will be displayed, and a green frame (AF target) will be displayed in the focus location. 250 F5.6 e 01:02:03 1023 ISO-A 200 ISO-A 200 Press the shutter button halfway. AF confi rmation mark Shutter speed Aperture value AF target • The ISO sensitivity, shutter speed and aperture value that have been set automatically by the camera are displayed. • If the AF confi rmation mark blinks, the subject is not in focus. (P. 136) 3 Press the shutter button again to take a picture. (Press all the way down.) • The shutter sounds and the picture is taken. • The shot image will be displayed on the monitor. Pressing the shutter button halfway and all the way down The shutter button has two positions. The act of lightly pressing the shutter button to the fi rst position and holding it there is called “pressing the shutter button halfway,” that of pressing it all the way down to the second position “pressing the shutter button all (or the rest of) the way down.” Press halfway Press the rest of the way down # Cautions • You can change the viewfi nder display style. In this manual, [Style 1] is used. • If the angle of the monitor has been changed, the viewfi nder will not light up automatically. • If you press and hold down the u button, a menu is displayed that allows you to change the settings for automatically lighting up the viewfi nder.

2 Recording movies You can record movies in all shooting modes except J (PHOTO STORY). First, try recording in full auto mode. 1 Set the mode dial to A. 2 Press the R button to begin recording. • The image being shot is displayed on the monitor. • If you look through the viewfi nder, the image being recorded will be displayed. • You can change the focus location by touching the screen while recording (P. 27). R button 3 Press the R button again to end recording. • When shooting is complete, the super control panel will be displayed on the monitor. 00:02:18 00:02:18 R Displayed during recording Recording time # Cautions • When using a camera with a CMOS image sensor, moving objects may appear distorted due to the rolling shutter phenomenon. This is a physical phenomenon whereby distortion occurs in the fi lmed image when shooting a fast-moving subject or due to camera shaking. In particular, this phenomenon becomes more noticeable when using a long focal length. • If the camera is used for extended periods, the temperature of the image pickup device will rise and noise and colored fog may appear in images. Turn off the camera for a short time. Noise and colored fog may also appear in images recorded at high ISO sensitivity settings. If the temperature rises further, the camera will turn off automatically. • When using a Four Thirds system lens, the AF will not operate while recording movies.  Taking photographs during movie recording • Press the shutter button during movie recording to pause movie recording and take a photograph. Movie recording restarts after the photograph is taken. Press the R button to end recording. Three fi les will be recorded to the memory card: the movie footage preceding the photograph, the photograph itself, and the movie footage following the photograph. • Only one photograph can be taken at a time during movie recording; the self-timer and fl ash cannot be used. # Cautions • Image size and quality for photographs are independent of movie frame size. • The autofocus and metering used in movie mode may differ from that used to take photographs. • The R button cannot be used to record movies in the following instances: Multiple exposure (still photography also ends.)/shutter button pressed halfway/during bulb or time photography/sequential shooting/Panorama/SCN mode (e-Portrait, Hand- Held Starlight, 3D)/time lapse shooting

2 Setting shooting functions Using the Multi-function button When framing pictures in the viewfi nder, you can adjust settings quickly using the multi-function button. At default settings, the Fn2 button is assigned the role of the multi-function button.  Choosing a function 1 Press and hold the Fn2 button and rotate the dial. • The menus are displayed. 2 Keep rotating the dial to select the desired function. • Release the button when the desired function is selected.  Using multifunction options Press the Fn2 button. An option selection dialog will be displayed. [a] assigned to Fn2 button Zoom AF Zoom frame AF Shooting display Fn2 Fn2 250 F5.6 e 01:02:03 1023 ISO-A 200 ISO-A 200 250 F5.6 e 01:02:03 1023 ISO-A 200 ISO-A 200 250 F5.6 e 01:02:03 1023 ISO-A 200 ISO-A 200 Press and hold Q/Fn2 Highlight and shadow control options SHADOW HI LIGHT 250 F5.6 0.0 0.0 e ISO-A 200 ISO-A 200 01:02:03 1023 P 4:3 Aspect ratio options Color Creator option Fn2 Other option assigned to Fn2 button Function Front dial (r) Rear dial (o) b (Highlight and shadow control) (P.49) Highlight control Shadow control c (Color Creator) (P.58) Hue Saturation a (Zoom frame AF/zoom AF) (P.54) Zoom frame AF: Exposure compensation Zoom AF: Zoom in or out d (Image Aspect) (P.69) Select an option

2 Using the super control panel When shooting using the viewfi nder, the super control panel will be displayed on the monitor. Set your main shooting functions using the super control panel. Super control panel display 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 ISO +2.0 +2.0 R 2 5 3 4 1 6 7 8 9 a 0 c d f e b Settings that can be modifi ed using the super control panel 1 Currently selected option 2 ISO sensitivity .................................P. 57 3 Flash mode .....................................P. 50 4 Flash intensity control .....................P. 71 5 Sequential shooting/self-timer ........P. 55 6 White balance .................................P. 56 White balance compensation 7 Picture mode...................................P. 68 8 Sharpness N..................................P. 78 Contrast J .....................................P. 78 Saturation T .................................P. 78 Gradation z...................................P. 78 B&W Filter x .................................P. 78 Picture tone y ...............................P. 79 9 Color space.....................................P. 95 0 Button function assignment ......P. 91, 99 a Face priority ....................................P. 53 b Metering mode ................................P. 72 c Aspect ratio .....................................P. 69 d Record mode ..................................P. 70 e AF mode .........................................P. 73 AF target .........................................P. 52 f Image stabilizer...............................P. 66 # Cautions • Not displayed in SCN, J, or n modes. 1 Press the Q button. • The cursor appears. 2 Touch the function you wish to set. • The cursor appears over the function you touched. 3 Turn the front dial and select a setting value. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 ISO Cursor $ Notes • You can display menus for each function by selecting a function and pressing Q.

3 3 Shooting You can switch between shooting using the viewfi nder and shooting using live view by pressing the u button. When shooting using live view, the subject is displayed on the monitor. 250 250 F5.6 01:02:03 01:02:03 38 38 ISO-A 200 Wi-Fi R u button Monitor Shooting still pictures 1 Set up the camera and decide on the composition. • Be careful not to cover the lens with a fi nger or the camera strap. 2 Touch the area of the subject you want to focus on. • The camera focuses on the area you touched and automatically takes a photograph. • The recorded image is displayed on the monitor. 250 250 F5.6 01:02:03 01:02:03 38 38 ISO-A 200 Wi-Fi R $ Notes • You can also use the shutter button to take a photograph, just as you would when shooting using the viewfi nder. • You can also press the shutter button after the camera focuses on the area you touched to take a photograph. g “Using the touch screen” (P. 27) Shooting using live view

3 Recording movies You can record movies in all shooting modes except J (PHOTO STORY). First, try recording in full auto mode. 1 Set the mode dial to A. 2 Press the R button to begin recording. • You can change the focus location by touching the screen while recording (P. 27). R button 3 Press the R button again to end recording. 00:02:18 00:02:18 R Displayed during recording Recording time # Cautions • When using a camera with a CMOS image sensor, moving objects may appear distorted due to the rolling shutter phenomenon. This is a physical phenomenon whereby distortion occurs in the fi lmed image when shooting a fast-moving subject or due to camera shaking. In particular, this phenomenon becomes more noticeable when using a long focal length. • If the camera is used for extended periods, the temperature of the image pickup device will rise and noise and colored fog may appear in images. Turn off the camera for a short time. Noise and colored fog may also appear in images recorded at high ISO sensitivity settings. If the temperature rises further, the camera will turn off automatically. • When using a Four Thirds system lens, the AF will not operate while recording movies.  Taking photographs during movie recording • Press the shutter button during movie recording to pause movie recording and take a photograph. Movie recording restarts after the photograph is taken. Press the R button to end recording. Three fi les will be recorded to the memory card: the movie footage preceding the photograph, the photograph itself, and the movie footage following the photograph. • Only one photograph can be taken at a time during movie recording; the self-timer and fl ash cannot be used. # Cautions • Image size and quality for photographs are independent of movie frame size. • The autofocus and metering used in movie mode may differ from that used to take photographs. • The R button cannot be used to record movies in the following instances: Multiple exposure (still photography also ends.)/shutter button pressed halfway/during bulb or time photography/sequential shooting/Panorama/SCN mode (e-Portrait, Hand- Held Starlight, 3D)/time lapse shooting

3 Using the touch screen When shooting using live view, touch panel functions can be used. Selecting a focusing method You can focus and shoot by tapping the monitor. Tap T to cycle through touch screen settings. 250 250 F5.6 01:02:03 01:02:03 30 30 ISO-A 200 R Wi-Fi U Touch screen operations disabled. T Tap a subject to focus and automatically release the shutter. This function is not available in n mode. V Tap to display an AF target and focus on the subject in the selected area. You can use the touch screen to choose the position and size of the focus frame. Photographs can be taken by pressing the shutter button.  Previewing Your Subject ( V ) 1 Tap the subject in the display. • An AF target will be displayed. • Use the slider to choose the size of the frame. 14 14 10 10 77 5x 5x 250 250 F5.6 ISO-A 200 S-IS AUTO S-IS AUTO 2 Use the slider to choose the size of the target frame, and then tap Y to zoom in on the subject of the target frame. • Use your fi nger to scroll the display when the picture is zoomed in. • Tap Z to cancel the zoom display. # Cautions • When using a Four Thirds system lens, the range within which auto focus is possible decreases. If you touch the screen outside of the possible range, the camera shoots without using AF. Using the wireless LAN function You can connect the camera to a smartphone and control the camera over Wi-Fi. To use this function, you must have the relevant app installed on the smartphone. g “Using the camera wireless LAN function” (P. 119), “Things you can do with OI.Share” (P. 121) 250 250 F5.6 01:02:03 01:02:03 30 30 Wi-Fi ISO-A 200 R Wi-Fi

3 Setting shooting functions Using live guides Live guides are available in iAUTO (A) mode. While iAUTO is a full auto mode, live guides make it easy to access a variety of advanced photographic techniques. 1 Set the mode dial to A. 2 Touch the tab to display live guides. • Select a guide item and touch it to set that item. 250 250 F5.6 01:02:03 01:02:03 38 38 ISO-A 200 Wi-Fi R Tab Change Color Saturation Cancel Guide item 3 Use your fi nger to position the sliders. • Tap a to enter the setting. • To cancel the live guide setting, tap k on the screen. • If [Shooting Tips] is selected, highlight an item and press Q to view a description. • The effect of the selected level is visible in the display. If [Blur Background] or [Express Motions] is selected, the display will return to normal, but the selected effect will be visible in the fi nal photograph. 0 Clear & Vivid Flat & Muted Cancel Set Level bar/selection 4 Shoot. • To clear the live guide from the display, press the MENU button. $ Notes • Live guides can also be used when shooting using the viewfi nder. When shooting using the viewfi nder, settings are made using the dial and buttons. If you press the Q button, the live guide is displayed, and the rear dial is used to select items and operate the sliders.

3 # Cautions • If [RAW] is currently selected for image quality, image quality will automatically be set to [YN+RAW]. • Live guide settings are not applied to the RAW copy. • Pictures may appear grainy at some live guide setting levels. • Changes to live guide setting levels may not be visible in the monitor. • Frame rates drop when [Blurred Motion] is selected. • The fl ash cannot be used with the live guide. • Changes to live guide options cancel previous changes. • Choosing live guide settings that exceed the limits of the camera exposure meters may result in pictures that are over or underexposed.

3 Using live control When shooting using live view, live control can be used to set functions in P, A, S, M, n, and J modes. Using live control allows you to preview the effects of different settings in the monitor. WB AUTO WB WB WB AUTO AUTO AUTO AUTO AUTO L N 4:3 WB AUTO WB WB WB AUTO AUTO AUTO P WB Auto AUTO AUTO S-IS AUTO S-IS AUTO FullHD F Settings Functions  Available settings Image stabilizer ....................................P. 66 Picture mode ........................................P. 68 Scene mode .........................................P. 45 Art fi lter mode .......................................P. 44 n mode ...............................................P. 69 White balance .......................................P. 56 Sequential shooting/self-timer ..............P. 55 Aspect ratio...........................................P. 69 Record mode ........................................P. 70 Flash mode ...........................................P. 50 Flash intensity control ...........................P. 71 Metering mode......................................P. 72 AF mode ...............................................P. 73 ISO sensitivity .......................................P. 57 Face priority ..........................................P. 53 Movie sound record ..............................P. 74 1 Press Q to display the live control. • To hide the live control, press Q again. 2 Use the rear dial to select the settings, use the front dial to change the selected setting, and press Q. • The selected settings take effect automatically if no operations are performed for about 8 seconds. WB AUTO WB WB WB AUTO AUTO AUTO AUTO AUTO L N 4:3 WB AUTO WB WB WB AUTO AUTO AUTO P WB Auto AUTO AUTO S-IS AUTO S-IS AUTO FullHD F Cursor Displays the selected function name Cursor Arrow pad Arrow pad # Cautions • Some items are not available in some shooting modes. $ Notes • Live control can also be used when shooting using the viewfi nder. If you press the Q button during viewfi nder display, live control will be displayed in the viewfi nder. If the viewfi nder is switched off while shooting is in progress, live control will also be canceled.

4 4 Viewing photographs and movies 1 Press the q button. • Your most recent photograph or movie will be displayed. • Select the desired photograph or movie using the front dial or arrow pad. HI Front dial Displays the previous frame Displays the next frame q button 2013.10.01 12:30 20 100-0020 L N 2013.10.01 12:30 4 100-0004 WB AUTO WB WB WB AUTO AUTO AUTO P HD Still image Movie Index display/Calendar display • To start index playback, turn the rear dial to G during single-frame playback. To start calendar playback, turn the dial a little further. • Turn the rear dial to a to return to single-frame playback. q p q p 2013.10.01 12:30 20 100-0020 L N Index display 2013.10.01 12:30 21 Calendar display 2013.10 Sun Mon Tue Wed Thu Fri Sat 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 3 4 5 6 7 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 3 4 5 6 7 Viewing photographs and movies Q

4 Viewing still images Close-up playback In single-frame playback, turn the rear dial to a to zoom in. Turn to G to return to single- frame playback. 2x 2013.10.01 12:30 20 100-0020 L N Rear dial Watching movies Select a movie and press the Q button to display the playback menu. Select [Movie Play] and press the Q button to begin playback. To interrupt movie playback, press MENU. m Movie Back Movie Play Erase Set Share Order Volume Volume can be adjusted by pressing F or G during single- frame and movie playback. 00:00:02/00:00:14 Protecting images Protect images from accidental deletion. Display an image you wish to protect and press the AEL/AFL button; a 0 (protect) icon will appear on the image. Press the AEL/AFL button again to remove protection. You can also protect multiple selected images. 2013.10.01 12:30 20 100-0020 L N 4:3 0 (protect) icon # Cautions • Formatting the card erases all images even if they have been protected.

4 Erasing images Display an image you want to delete and press the  button. Select [Yes] and press the Q button.  button Erase Back Yes No Set Selecting images Select the image. You can also select multiple images for protection or deletion. Press the H button to select an image; a v icon will appear on the image. Press the H button again to cancel the selection. Press Q to display the delete or protect selection menu. 2013.10.01 12:30 21

4 Using the touch screen You can use the touch panel to manipulate images.  Full-frame playback Viewing additional images • Slide your fi nger to the left to view later frames, right to scroll view earlier frames. Playback zoom • Slide the bar up or down to zoom in or out. • Use your fi nger to scroll the display when the picture is zoomed in. • Tap P to display index playback. Tap Q again for calendar playback.  Index/Calendar Playback Page ahead/Page back • Slide your fi nger up to view the next page, down to view the previous page. • Use Q or R to choose the number of images displayed. • Tap R several times to return to single-frame playback. S Viewing images • Tap an image to view it full frame. Selecting and protecting images In single-frame playback, lightly touch the screen to display the touch menu. You can then perform the desired operation by touching the icons in the touch menu. H Select an image. You can select multiple images for protection. h You can set the images you wish to share over Wi-Fi connection. g [Share Order] (P. 62) 0 Protects an image. # Cautions • The situations in which touch screen operations are not available include the following. Panorama/3D/e-portrait/multiple exposure/during bulb or time photography/one-touch white balance dialog/when buttons or dials are in use • Do not touch the display with your fi ngernails or other sharp objects. • Gloves or monitor covers may interfere with touch screen operation. • You can also use the touch screen with the ART, SCN and J menus. Tap an icon to select it.

Viewfi nder display when shooting using the viewfi nder AEL MY1 250 F5.6 +2.0 +2.0 Hi +7 Sh-3 Hi +7 Sh-3 e ISO-A 200 ISO-A 200 01:02:03 1023 PBH AEL MY1 250 F5.6 +2.0 +2.0 Hi +7 Sh-3 Hi +7 Sh-3 e ISO-A 200 ISO-A 200 01:02:03 1023 PBH AEL MY1 250 F5.6 +2.0 +2.0 Hi +7 Sh-3 Hi +7 Sh-3 e ISO-A 200 ISO-A 200 01:02:03 1023 PBH f g e 1 2 3 4 c b a 0 9 7 6 8 5 d 1 Battery check ; Lit up: Ready for use. : Lit up: Battery is running low. ] Blinks (red) : Charging required. 2 Shooting mode...................P. 18, 38 – 47 3 Myset ..............................................P. 77 4 Available recording time 5 Number of storable still pictures ...P. 124 6 ISO sensitivity .................................P. 57 7 White balance .................................P. 56 8 Highlight and shadow control..........P. 49 9 Top: Flash intensity control .............P. 71 Bottom: Exposure compensation indicator .............................P. 49 0 Exposure compensation value........P. 49 a Aperture value .........................P. 38 – 41 b Shutter speed ..........................P. 38 – 41 c AE Lock u ...................................P. 49 d AF confi rmation mark......................P. 21 e Flash ...............................................P. 50 (blinks: charging in progress) f PBH (displayed when camera is receiving power from power battery holder)...........................................P. 129 g Level gauge (displayed by pressing the shutter button down halfway) ..........P. 37 You can change the viewfi nder display style. In this manual, [Style 1] is used. g [Built-in EVF Style] (P. 97)

250 250 F5.6 ISO 400 L N 4:3 S-AF S-AF AEL RC BKT +2.0 +2.0 P +7 +7 01:02:03 01:02:03 1023 1023 45 mm 45 mm -3 -3 j R -2.0 -2.0 HD N 1 3 j FPS Wi-Fi FP S-IS S-IS x y z A B C w v u 1 g h i j k l m f e 23 456 9 7 0a b r t q p o s n d c D 8 1 Card write indicator .........................P. 13 2 Wi-Fi connection .....................P. 27, 119 3 Super FP fl ash ..............................P. 130 4 RC mode.......................................P. 131 5 Auto bracket/HDRf ...........P. 80/P. 59 6 Multiple exposure............................P. 82 7 High frame rate ...............................P. 93 8 Digital Tele-converter ......................P. 84 9 Time lapse shooting ........................P. 83 0 Face priority ....................................P. 53 a Movie sound ...................................P. 74 b Focal length/Internal temperature warning m ................P. 128/P. 139 c Flash ...............................................P. 50 (blinks: charging in progress, lights up: charging completed) d AF confi rmation mark......................P. 21 e Image stabilizer...............................P. 66 f Art fi lter ...........................................P. 44 Scene mode....................................P. 45 Picture mode...................................P. 68 g White balance .................................P. 56 h Sequential shooting/self-timer ........P. 55 i Aspect ratio .....................................P. 69 j Record mode (still images) .............P. 70 k Record mode (movies) ...................P. 71 l Available recording time m Number of storable still pictures ...P. 124 n Highlight&Shadow Control ..............P. 49 o Top: Flash intensity control ......P. 71 Bottom: Exposure compensation indicator............................P. 49 p Exposure compensation value........P. 49 q Aperture value .........................P. 38 – 41 r Shutter speed ..........................P. 38 – 41 s Histogram .......................................P. 37 t AE Lock ..........................................P. 49 u Shooting mode...................P. 18, 38 – 47 v Myset ..............................................P. 77 w Shooting using touch screen operations .......................................P. 27 x Flash intensity control .....................P. 71 y ISO sensitivity .................................P. 57 z AF mode .........................................P. 73 A Metering mode ................................P. 72 B Flash mode .....................................P. 50 C Battery check ; Lit up (green): Ready for use (displayed for about ten seconds after the camera is turned on.) : Lit up (green): Battery is running low. ] Blinks (red): Charging required D Live guide recall ..............................P. 28

You can switch the information displayed in the monitor during shooting using the INFO button.  When shooting using the viewfi nder Monitor display INFO INFO INFO INFO INFO INFO Super control panel 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 2013.10.01 12:30 R Wi-Fi 0.0 0.0 Level gauge display 250 250 F5.6 P 0.0 0.0 ISO-A 200 Wi-Fi Image only Viewfi nder display Can be switched while looking through the viewfi nder. INFO INFO Level gauge display INFO INFO INFO INFO 250 F5.6 0.0 0.0 e ISO-A 200 ISO-A 200 01:02:03 1023 INFO INFO Image only Histogram display Information display on 250 F5.6 0.0 0.0 e ISO-A 200 ISO-A 200 01:02:03 1023 S-IS AUTO S-IS AUTO 250 F5.6 0.0 0.0 e ISO-A 200 ISO-A 200 01:02:03 1023 250 F5.6 0.0 0.0 e ISO-A 200 ISO-A 200 01:02:03 1023 L N S-IS AUTO S-IS AUTO FullHD FullHD R  When shooting using Live View INFO Level gauge display INFO INFO 250 250 F5.6 P 0.0 0.0 INFO Image only Histogram display Information display on 01:02:03 01:02:03 38 38 250 250 F5.6 0.0 0.0 R Wi-Fi L N S-IS AUTO S-IS AUTO ISO-A 200 FullHD F 01:02:03 01:02:03 38 38 250 250 F5.6 P 0.0 0.0 R Wi-Fi L N S-IS AUTO S-IS AUTO FullHD FullHD ISO-A 200 Histogram display Display a histogram showing the distribution of brightness in the image. The horizontal axis gives the brightness, the vertical axis the number of pixels of each brightness in the image. Areas above the upper limit at shooting are displayed in red, those below the lower limit in blue, and the area metered using spot metering in green. Level gauge display Indicate the orientation of the camera. The “tilt” direction is indicated on the vertical bar and the “horizon” direction on the horizontal bar. Use the indicators on the level gauge as a guide.

“Point-and-shoot” photography (P program mode) In mode P, the camera automatically adjusts shutter speed and aperture in response to subject brightness. Set the mode dial to P. AEL MY1 250 F5.6 +2.0 +2.0 Hi +7 Sh-3 Hi +7 Sh-3 e ISO-A 200 ISO-A 200 01:02:03 1023 PBH 250 250 F5.6 01:02:03 01:02:03 38 38 L N P ISO-A 200 0.0 0.0 FullHD F R Wi-Fi S-IS AUTO S-IS AUTO Shooting mode Shutter speed Aperture value When shooing using the viewfi nder When shooting using live view • The functions you can set with the dials depend on the position of the lever. Front dial Lever Rear dial Dial Position of the lever 1 2 r Exposure compensation ISO o Program shift White balance • The shutter speed and aperture selected by the camera are displayed. • The shutter speed and aperture displays will blink if the camera is unable to achieve optimal exposure. Warning display example (blinking) Status Action 60" 60" F2.8 F2.8 The subject is too dark. • Use the fl ash. 8000 8000 F22 F22 The subject is too bright. • The metered range of the camera is exceeded. A commercially available ND fi lter (for adjusting the amount of light) is required. • The aperture value at the moment when its indication blinks varies with the lens type and focal length of the lens. • When using a fi xed [ISO] setting, change the setting. g [ISO] (P. 57) Program shift (%) In P and ART modes, you can choose different combinations of aperture value and shutter speed without altering exposure. “s” appears next to the shooting mode during program shift. To cancel program shift, turn the rear dial until “s” is no longer displayed. # Cautions • Program shift is not available when you are using a fl ash. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 2013.10.01 12:30 0.0 0.0 Ps R Wi-Fi Program shift

In mode A, you choose the aperture and let the camera automatically adjust shutter speed for optimal exposure. Rotate the mode dial to A. Front dial Lever Rear dial Dial Position of the lever 1 2 r Exposure compensation ISO o Aperture value White balance • Larger apertures (lower F-numbers) decrease depth of fi eld (the area in front of or behind the focus point that appears to be in focus), softening background details. Smaller apertures (higher F-numbers) increase depth of fi eld. Aperture value 250 250 F5.6 01:02:03 01:02:03 38 38 L N A 0.0 0.0 ISO 400 FullHD F When shooting using live view Setting the aperture value Reducing aperture value   Increasing aperture value F2 F3.5 F5.6 F8.0 F16 • The shutter speed display will blink if the camera is unable to achieve optimal exposure. Warning display example (blinking) Status Action 30" 30" F5.6 F5.6 The subject is underexposed. • Decrease the aperture value. 8000 8000 F5.6 F5.6 The subject is overexposed. • Increase the aperture value. • If the warning display does not disappear, the metered range of the camera is exceeded. A commercially available ND fi lter (for adjusting the amount of light) is required. • The aperture value at the moment when its indication blinks varies with the lens type and focal length of the lens. • When using a fi xed [ISO] setting, change the setting. g [ISO] (P. 57) Preview function You can preview the focus range (depth of fi eld). While pressing the preview button, the aperture is stopped down to the set aperture value.

In mode S, you choose the shutter speed and let the camera automatically adjust aperture for optimal exposure. Rotate the mode dial to S. Front dial Lever Rear dial Dial Position of the lever 1 2 r Exposure compensation ISO o Shutter speed White balance • A fast shutter speed can freeze a fast action scene without any blur. A slow shutter speed will blur a fast action scene. This blurring will give the impression of dynamic motion. When shooting using live view Shutter speed 250 250 F5.6 01:02:03 01:02:03 38 38 L N S 0.0 0.0 ISO 400 FullHD F Setting the shutter speed Slower shutter speed   Faster shutter speed 2"  1"  15 60 100 400 1000 • The aperture value display will blink if the camera is unable to achieve optimal exposure. Warning display example (blinking) Status Action 2000 2000 F2.8 F2.8 The subject is underexposed. • Set the shutter speed slower. 125 125 F22 F22 The subject is overexposed. • Set the shutter speed faster. • If the warning display does not disappear, the metered range of the camera is exceeded. A commercially available ND fi lter (for adjusting the amount of light) is required. • The aperture value at the moment when its indication blinks varies with the lens type and focal length of the lens. • When using a fi xed [ISO] setting, change the setting. g [ISO] (P. 57)

In mode M, you choose both the aperture and the shutter speed. At a speed of BULB, the shutter remains open while the shutter button is pressed. Set the mode dial to M. Front dial Lever Rear dial Dial Position of the lever 1 2 r Aperture value ISO o Shutter speed White balance • Shutter speed can be set to values between 1/8000 and 60 seconds or to [BULB] or [LIVE TIME]. # Cautions • Exposure compensation is not available in M mode. Choosing when the exposure ends (bulb/time photography) Use for night landscapes and fi reworks. Shutter speeds of [BULB] and [LIVE TIME] are available in mode M. Bulb photography (BULB): The shutter remains open while the shutter button is pressed. The exposure ends when the shutter button is released. Time photography (TIME): The exposure begins when the shutter button is pressed all the way down. To end the exposure, press the shutter button all the way down again. • When using BULB or TIME, screen brightness is varied automatically. • When using [LIVE TIME], the progress of the exposure will be displayed in the monitor during shooting. The display can also be refreshed by pressing the shutter button halfway. • [Live BULB] (P. 94) can be used to display the image exposure during bulb photography. # Cautions • ISO sensitivity can be set to a value up to ISO 1600 for live bulb and live time photography. • To reduce camera blur during long exposures, mount the camera on a tripod and use a remote cable (P. 133). • The following features are not available during long exposures: Sequential shooting/self-timer shooting/AE bracket shooting/image stabilizer/ fl ash bracketing/multiple exposure* * An option other than [Off] is selected for [Live BULB] or [Live TIME] (P. 94). • Even when [Noise Reduct.] is in use, noise may be noticeable in the image displayed on the monitor during shooting. Noise in images While shooting at slow shutter speeds, noise may appear on screen. These phenomena occur when the temperature rises in the image pickup device or image pickup device internal drive circuit, causing current to be generated in those sections of the image pickup device that are not normally exposed to light. This can also occur when shooting with a high ISO setting in a high-temperature environment. To reduce this noise, the camera activates the noise reduction function. g [Noise Reduct.] (P. 93)

Movie mode (n) can be used to fi lm movies with special effects. You can create movies that take advantage of the effects available in still photography mode. Use live control to select the settings. g “Adding effects to a movie” (P. 69) You can also apply an after-image effect or zoom in on an area of the image during movie recording. Adding effects to a movie [Movie Effect] 1 Rotate the mode dial to n. 2 Press the R button to begin recording. • Press the R button again to end recording. 3 Touch the on-screen icon of the effect you wish to use. • You can also use the buttons displayed on icons. U Multi Echo Apply an after-image effect. After-images will appear behind moving objects. V One Shot Echo An after-image will appear for a short time after you press the button. The after-image will disappear automatically after a while. T Art Fade Film with the selected picture mode effect. The fade effect is applied to the transition between scenes. M Movie Tele- converter Zoom in on an area of the image without using the lens zoom. Zoom in on the selected position of the image even while the camera is kept fi xed. Multi Echo Touch the icon to apply the effect. Touch again to cancel the effect. One Shot Echo Each touch of the icon adds to the effect. Art Fade Touch the icon. Touch the picture mode you wish to use. The effect will be applied when you release your fi nger.

• You can change the position of the zoom frame by touching the screen or using FGHI. • Press and hold Q to return the zoom frame to a central position. 2 Touch K or press the Fn2 button to zoom in on the area in the zoom frame. • Touch L or press the Fn2 button to return to the zoom frame. 3 Touch O or press Q to cancel the zoom frame and exit Movie tele- converter mode. # Cautions • The frame rate will drop slightly during recording. • The 2 effects cannot be applied simultaneously. • Use a memory card with an SD speed class of 6 or better. Movie recording may end unexpectedly if a slower card is used. • Taking a photograph during movie recording cancels the effect; the effect does not appear in the photograph. • [e-Portrait], [Diorama] and [Color Creator] cannot be used at the same time as Art Fade. • Movie Tele-converter cannot be used when [Picture Mode] is set to [ART]. • The sound of touch operations and button operations may be recorded. • Besides using touch operations, you can apply effects using the buttons corresponding to the displayed icons.

1 Rotate the mode dial to ART. • A menu of art fi lters will be displayed. Select a fi lter using FG. • Press Q or press the shutter button halfway to select the highlighted item and exit the art fi lter menu. 1 Pop Art  Types of art fi lters j Pop Art t Cross Process k Soft Focus u Gentle Sepia l Pale&Light Color v Dramatic Tone m Light Tone Y Key Line n Grainy Film Z Watercolor o Pin Hole u ART BKT (ART bracketing) s Diorama 2 Shoot. • To choose a different setting, press Q to display the art fi lter menu. ART bracketing When one shot is taken, images are recorded for each selected art fi lter. Press I to choose fi lters. Art effects Art fi lters can be modifi ed and effects can be added. Pressing I in the art fi lter menu displays additional options. Modifying fi lters Option I is the original fi lter, while options II and on add effects that modify the original fi lter. Adding effects* Soft focus, pin-hole, frames, white edges, starlight, fi lter, tone, blur * The effects available vary with the selected fi lter. # Cautions • If [RAW] is currently selected for image quality, image quality will automatically be set to [YN+RAW]. The art fi lter will be applied to the JPEG copy only. • Depending on the subject, tone transitions may be ragged, the effect may be less noticeable, or the image may become more “grainy.” • Some effects may not be visible in live view or during movie recording. • Playback may differ according to the fi lters, effects, or movie quality settings applied.

1 Rotate the mode dial to SCN. • A menu of scene menu will be displayed. Select a scene using FG. • Press Q or press the shutter button halfway to select the highlighted item and exit the scene menu. 1 Portrait   Types of scene modes O Portrait J Macro P e-Portrait r Nature Macro L Landscape Q Candle K Landscape+Portrait R Sunset J Sport T Documents i Hand-Held Starlight s Panorama (P. 46) G Night Scene ( Fireworks U Night+Portrait g Beach & Snow G Children f n Fisheye Effect H High Key w n Wide-Angle I Low Key m n Macro q DIS Mode T 3D Photo 2 Shoot. • To choose a different setting, press Q to display the scene menu. # Cautions • In [e-Portrait] mode, two images are recorded: an unmodifi ed image and a second image to which [e-Portrait] effects have been applied. Recording may take some time. In addition, when the image quality mode is [RAW], the image is recorded in RAW+JPEG. • [n Fisheye Effect], [n Wide-Angle], and [n Macro] are for use with optional converter lenses. • Movies cannot be recorded in [e-Portrait], [Hand-Held Starlight], [Panorama], or [3D Photo] mode. • In [Hand-Held Starlight], 8 frames are shot at one time and then combined. When the image quality mode is [RAW], a JPEG image is combined with the fi rst RAW image and recorded in RAW+JPEG. • [3D Photo] is subject to the following limitations. [3D Photo] can be used only with a 3D lens. The camera monitor cannot be used to playback images in 3D. Use a device that supports 3D display. Focus is locked. In addition, fl ash and self-timer also cannot be used. Image size is fi xed at 1920 × 1080. RAW photography is not available. Frame coverage is not 100%.

to form a panorama. g “Connecting the camera to a computer and a smartphone” (P. 116) 1 Rotate the mode dial to SCN. 2 Select [Panorama] and press Q. 3 Use FGHI to choose a pan direction. 4 Take a picture, using the guides to frame the shot. • Focus, exposure, and other settings are fi xed at the values for the fi rst shot. 250 250 F5.6 38 M 5 Take the remaining images, framing each shot so that the guides overlap with the previous picture. [ 2 ] 250 250 F5.6 38 M [ 3 ] Exit Exit • A panorama may include up to 10 images. A warning indicator (g) is displayed after the tenth shot. 6 After taking the last shot, press Q to end the series. # Cautions • During panorama shooting, the image previously taken for position alignment will not be displayed. With the frames or other markers for display in the images as a guide, set the composition such that the edges of the overlapping images overlap within the frames. $ Notes • Pressing Q before shooting the fi rst frame returns to the scene mode selection menu. Pressing Q in the midst of shooting ends the sequence of panorama shooting, and allows you to continue with the next one.

1 Rotate the mode dial to J. • A PHOTO STORY menu will be displayed. A Standard B Speed C Fun Frames Standard 1 1 2 3 2 Use FG to choose the theme of the PHOTO STORY. • You can choose different effects, number of frames and aspect ratios for each theme. You can also change the aspect ratio, the division pattern and the frame effect of individual images. Changing between variations E Original PHOTO STORY F G H PHOTO STORY with effects and aspect ratios changed from the original PHOTO STORY. The number of images and arrangement of image regions can be altered for each theme of the PHOTO STORY. • You can change the frame color and frame surrounding effect in each variation. • Every theme and variation provides a different PHOTO STORY. 3 After fi nishing the settings, press Q. • The monitor switches to PHOTO STORY display. • The subject of current frame is displayed in live view. • Touch any of the masked frames to switch the masked frame to the current frame. • Press the MENU button to change the theme. 4 Shoot an image for the fi rst frame. • The image you have shot is displayed in the fi rst frame. F5.0 0.0 0.0 1 ISO-A 200 1023 1023 250 250 5 Shoot an image for the next frame. • View and shoot the subject for the next frame. • Press  to cancel the image in the directly preceding frame and retake the shot. • Touch any frame to cancel the image in it and retake the shot. Touch the frame, and then touch O. F5.0 0.0 0.0 1 ISO-A 200 1023 1023 250 250 Next frame (Live view display) Shot image

• Press the MENU button, and you can select other themes. $ Notes • During the shooting of a PHOTO STORY, the following operations are available. Exposure compensation/Program shift/Flash shooting (except when the theme is [Speed].)/Live control settings # Cautions • If the camera is turned off during shooting, all the data for images up to that point is cancelled and nothing is recorded on the memory card. • If [RAW] is currently selected for image quality, image quality will automatically be set to [YN+RAW]. The PHOTO STORY image is saved as JPEG and the images in the frames as RAW. RAW images are saved in [4:3]. • From among the [AF Mode], [S-AF], [MF] and [S-AF+MF] can be set. Also, the AF target is fi xed to a single central point. • The metering mode is fi xed to digital ESP metering. • The following operations are not available in PHOTO STORY mode. MENU display/Movie/Sequential shooting/Self timer/INFO display/Face priority AF/ Digital Tele-converter/Picture mode • The following button operations are disabled. Fn1/Fn2/INFO etc. • During the shooting of a PHOTO STORY, the camera will not go into sleep mode.

Controlling exposure (exposure compensation) Rotate the front dial to choose exposure compensation. Choose positive (“+”) values to make pictures brighter, negative (“–”) values to make pictures darker. Exposure can be adjusted by ±5.0 EV. Negative (–) No compensation (0) Positive (+) # Cautions • Exposure compensation is not available in A, M, or SCN mode. • The viewfi nder and live view display can only be changed up to ±3.0EV. If the exposure exceeds ±3.0EV, the exposure bar will begin fl ashing. • Movies can be corrected in a range up to ±3.0EV. Changing the brightness of highlights and shadows When the multi-function button is set to [Highlight&Shadow Control], a setting screen will be displayed when you press the Fn2 button. Adjust the shadow using the rear dial and the highlight using the front dial. SHADOW HI LIGHT Locking the exposure (AE Lock) You can lock just the exposure by pressing the AEL/AFL button. Use this when you want to adjust the focus and exposure separately or when you want to shoot several images at the same exposure. • If you press the AEL/AFL button once, the exposure is locked and u is displayed. g “AEL/AFL” (P. 98) • Press the AEL/AFL button once again to release the AE Lock. # Cautions • The lock will be released if you operate the mode dial, MENU button, or Q button.

The fl ash can be set manually as required. The fl ash can be used for fl ash photography in a variety of shooting conditions. 1 Attach the fl ash to the camera and raise the light-emitting unit. • g “Attaching the fl ash unit” (P. 15) 2 Set the lever to position 2 and press the AFm button. AFm button Lever P Flash Auto AUTO AUTO 0 0.0 When shooting using live view 3 Select a setting using the rear dial and press the Q button. • The options available and the order in which they are displayed vary depending on the shooting mode. g “Flash modes that can be set by shooting mode” (P. 51) AUTO Auto fl ash The fl ash fi res automatically in low light or backlight conditions. # Fill-in fl ash The fl ash fi res regardless of the light conditions. $ Flash off The fl ash does not fi re. !/#! Red-eye reduction fl ash This function allows you to reduce the red-eye phenomenon. In S and M modes, the fl ash always fi res. #SLOW Slow synchronization (1st curtain) Slow shutter speeds are used to brighten dimly-lit backgrounds. !SLOW Slow synchronization (1st curtain)/Red-eye reduction fl ash Combines slow synchronization with red-eye reduction. #SLOW2/ 2nd Curtain Slow synchronization (2nd curtain) The fl ash fi res just before the shutter closes to create trails of light behind moving light sources. #FULL, #1/4 etc. Manual For users who prefer manual operation. If you press the INFO button, you can use the dial to adjust the fl ash level. 4 Press the shutter button all the way.

before the shutter is released. Do not move the camera until shooting is complete. • [!/#!(Red-eye reduction fl ash)] may not work effectively under some shooting conditions. • When the fl ash fi res, the shutter speed is set to 1/320 sec. or slower. When shooting a subject against a bright background with the fi ll-in fl ash, the background may be overexposed. Flash modes that can be set by shooting mode Shooting mode LV super control panel Flash mode Flash timing Conditions for fi ring the fl ash Shutter speed limit P/A #AUTO Auto fl ash 1st curtain Fires automatically in dark/backlit conditions 1/30 sec. – 1/320 sec.* ! Auto fl ash (red-eye reduction) # Fill-in fl ash Always fi res 30 sec. – 1/320 sec.* $ Flash off k k k ! SLOW Slow synchronization (red-eye reduction) 1st curtain Fires automatically in dark/backlit conditions 60 sec. – 1/320 sec.* #SLOW Slow synchronization (1st curtain) # SLOW2 Slow synchronization (2nd curtain) 2nd curtain S/M # Fill-in fl ash 1st curtain Always fi res 60 sec. – 1/320 sec.* #! Fill-in fl ash (red-eye reduction) $ Flash off k k k # 2nd-C Fill-in fl ash/Slow synchronization (2nd curtain) 2nd curtain Always fi res 60 sec. – 1/320 sec.* • #AUTO, $ can be set in A mode. * 1/250 sec. when using an separately sold external fl ash unit Minimum range The lens may cast shadows over objects close to the camera, causing vignetting, or be too bright even at minimum output. Lens Approximate distance at which vignetting occurs 14 – 42 mm 0.25 m 17 mm 0.25 m 40 – 150 mm 0.9 m 14 – 150 mm 0.5 m 12 – 50 mm 0.45 m 12 – 40 mm 3.2 m (when focal length is 12 mm) 0.7 m (when focal length is 14 mm or above) • External fl ash units can be used to prevent vignetting. To prevent photographs from being overexposed, select mode A or M and choose a high f-number, or reduce ISO sensitivity.

Choose which of the 81 autofocus targets will be used for autofocus. 1 Press the arrow pad or Fn1 button to display the AF targets. 2 Rotate the dial to choose the AF position. • “All targets” mode is restored if you move the cursor off the screen. All Targets Single Target All Targets The camera automatically chooses from the full set of focus targets. Select the focus target manually. Differences in target display depending on lens The target display will differ depending on the lens you are using. When using a Micro Four Thirds system lens, 81 AF targets will be displayed. When using a Four Thirds system lens, 37 AF targets will be displayed. Setting the AF target You can change the target selection method and target size. You can also select Face priority AF (P. 53). 1 Press the INFO button during AF target selection and choose a selection method using FG. INFO i o FG i o (All Targets) The camera automatically selects all AF targets. I (Single Target) You select a single AF target. K (Small Target) The AF target can be reduced in size. J (Group Target) The camera automatically chooses from the targets in the selected group. # Cautions • Reverts to “Single Target” when shooting movies.

The camera detects faces and adjusts focus and digital ESP. 1 Press the Fn1 button to display the AF target. 2 Press the INFO button. • You can change the AF target selection method. 3 Use HI to select an option and press Q. i o Selection method J Face Priority Off Face priority off. I Face Priority On Face priority on. K Face & Eye Priority On The autofocus system selects the pupil of the eye closest to the camera for face-priority AF. L Face & R. Eye Priority On The autofocus system selects the pupil of the eye on the right for face-priority AF. M Face & L. Eye Priority On The autofocus system selects the pupil of the eye on the left for face-priority AF. 4 Point the camera at your subject. • When shooting using the viewfi nder, look through the viewfi nder. • If a face is detected, it will be indicated by a white border. 5 Press the shutter button halfway to focus. • When the camera focuses on the face in the white border, the border will turn green. • If the camera is able to detect the subject’s eyes, it will display a green frame over the selected eye. (pupil detection AF) 6 Press the shutter button the rest of the way down to shoot. 01:02:03 01:02:03 1023 1023 250 250 F5.6 P 0.0 0.0 R Wi-Fi L N S-IS AUTO S-IS AUTO ISO-A 200 FullHD F 01:02:03 01:02:03 1023 1023 250 250 F5.6 P 0.0 0.0 R Wi-Fi L N S-IS AUTO S-IS AUTO ISO-A 200 FullHD F # Cautions • Face priority applies only to the fi rst shot in each sequence taken during sequential shooting. • Depending on the subject and the art fi lter setting, the camera may not be able to correctly detect the face. • When set to [p (Digital ESP metering)], metering is performed with priority given to faces. • When using a Four Thirds system lens, even if a face is detected, if it is outside the AF area, the face priority AF will not operate. $ Notes • Face priority is also available in [MF]. Faces detected by the camera are indicated by white frames.

You can zoom in on a portion of the frame when adjusting focus. Choosing a high zoom ratio allows you to use autofocus to focus on a smaller area than is normally covered by the AF target. You can also position the focus target more precisely. 01:02:03 01:02:03 30 30 250 250 F5.6 0.0 0.0 R Wi-Fi L N S-IS AUTO S-IS AUTO ISO-A 200 FullHD F Shooting display 01:02:03 01:02:03 30 30 250 250 F5.6 0.0 0.0 R Wi-Fi L N S-IS AUTO S-IS AUTO ISO-A 200 FullHD F Zoom frame AF Zoom AF U U U Q / U (Press and hold) 1 Assign [U] to one of the buttons in advance using [Button Function] (P. 99). • a can also be set as a multi-function button. 2 Press the U button to display the zoom frame. • If the camera was focused using autofocus just before the button was pressed, the zoom frame will be displayed at the current focus position. • Use FGHI to position the zoom frame. • Press the INFO button and use FG to choose the zoom ratio. Comparison of AF and zoom frames 14× 10× 7× 5× 3 Press the U button again to zoom in on the zoom frame. • Use FGHI to position the zoom frame. • Rotate the dial to choose the zoom ratio. 4 Press the shutter button halfway to initiate autofocus. • The camera will focus using the subject in the frame at the center of the screen. To change the focus position, move it by touching the screen. $ Notes • You can also display and move the zoom frame using touch screen operations. # Cautions • Zoom is visible only in the monitor and has no effect on the resulting photographs. • When you are using a Four Thirds system lens, the AF will not operate with during zoom display.

Keep the shutter button pressed all the way down to take a series of photos. Alternatively, you can take pictures using the self timer. 1 Set the lever to position 1 and press the jYHDR button to display the selection items. 2 Turn the rear dial and select an item. o Single-frame shooting Shoots 1 frame at a time when the shutter button is pressed (normal shooting mode). T Sequential H Photographs are taken at about 10 frames per second (fps) while the shutter button is pressed all the way down. Focus, exposure, and white balance are fi xed at the values for the fi rst shot in each series ([S-AF], [MF]). S Sequential L Photographs are taken at about 6.5 frames per second (fps) while the shutter button is pressed all the way down. Focus and exposure are fi xed according to the options selected for [AF Mode] (P. 73) and [AEL/AFL] (P. 98). Y12s Self-timer 12 SEC Press the shutter button halfway to focus, the rest of the way down to start the timer. First, the self-timer lamp lights up for approximately 10 seconds, then it blinks for approximately 2 seconds and the picture is taken. Y2s Self-timer 2 SEC Press the shutter button halfway to focus, the rest of the way down to start the timer. The self-timer lamp blinks for approximately 2 seconds, and then the picture is taken. YC Self-timer Custom Set the number of frames to be shot. Select g, press the INFO button, and rotate the dial. $ Notes • To cancel the activated self-timer, press the jYHDR button. • In [S-AF] and [MF] focus modes, focus and exposure will be fi xed at the values for the fi rst frame in each sequence. # Cautions • When you are using S, no confi rmation image is displayed during shooting. The image is displayed again after shooting ends. When you are using T, the image shot immediately before is displayed. • The speed of sequential shooting varies depending on the lens you are using and the focus of the zoom lens. • During sequential shooting, if the battery check blinks due to low battery, the camera stops shooting and starts saving the pictures you have taken on the card. The camera may not save all of the pictures depending on how much battery power remains. • Fix the camera securely on a tripod for self-timer shooting. • If you stand in front of the camera to press the shutter button halfway when using the self- timer, the photograph may be out of focus.

White balance (WB) ensures that white objects in images recorded by the camera appear white. [AUTO] is suitable in most circumstances, but other values can be selected according to the light source when [AUTO] fails to produce the desired results or you wish to introduce a deliberate color cast into your images. 1 Set the lever to position 2, and turn the rear dial to select items. Lever Rear dial WB AUTO WB WB WB AUTO AUTO AUTO ISO-A 200 ISO-A ISO-A ISO-A 200 200 200 AUTO AUTO AUTO AUTO P WB Auto AUTO AUTO AUTO AUTO 250 F5.6 0.0 LOW LOW 200 200 250 250 320 320 400 400 500 500 Recommend WB mode Color temperature Light conditions Auto white balance AUTO k Used for most light conditions (when there is a white portion framed on the monitor). Use this mode for general use. Preset white balance 5 5300K For shooting outdoors on a clear day, or to capture the reds in a sunset or the colors in a fi reworks display N 7500K For shooting outdoors in the shadows on a clear day O 6000K For shooting outdoors on a cloudy day 1 3000K For shooting under a tungsten light > 4000K For subjects lit by fl uorescent lights U k For underwater photography n 5500K For fl ash shooting One-touch white balance (P. 57) P/Q/ W/X Color temperature set by one- touch WB. Choose when a white or gray subject can be used to measure white balance and the subject is under mixed lighting or lit by an unknown type of fl ash or other light source. Custom white balance CWB 2000K – 14000K After pressing the INFO button, use HI buttons to select a color temperature and then press Q.

Measure white balance by framing a piece of paper or other white object under the lighting that will be used in the fi nal photograph. This is useful when shooting a subject under natural light, as well as under various light sources with different color temperatures. 1 Prepare a neutral-colored paper, such as white or gray. • Frame the object so that it fi lls the display and no shadows fall it. 2 Shoot while pressing the Y (one-touch white balance) button. • You can also shoot after selecting P, Q, W, or X from the white balance options screen and then pressing INFO. 3 Select from P, Q, W, or X and register. • If it is already selected in the white balance menu, select [Yes] and press the Q button. • The new value is saved as a preset white balance option. • The new value is stored until one-touch white balance is measured again. Turning the power off does not erase the data. % Tips • If the subject is too bright or too dark or visibly tinted, the message [WB NG Retry] will be displayed and no value will be recorded. Correct the problem and repeat the process from Step 1. ISO sensitivity Increasing ISO sensitivity increases noise (graininess) but allows photographs to be taken when lighting is poor. The setting recommended in most situations is [AUTO], which starts at ISO 200 — a value that balances noise and dynamic range — and then adjusts ISO sensitivity according to shooting conditions. 1 Set the lever to position 2, and turn the front dial to select items. Lever Front dial AUTO The sensitivity is set automatically according to the shooting conditions. LOW, 200 – 25600 Sensitivity is set to the selected value.

You can adjust the color of the subject while looking through the viewfi nder. Select this function with the multi-function button to use it. Set the multi-function button to c (Color Creator) in advance (P. 23). 1 While looking through the viewfi nder, press the Fn2 button. • An options screen will be displayed in the viewfi nder. Fn2 button 2 Set hue using the front dial and saturation using the rear dial. • The settings are stored under picture mode. # Cautions • The white balance is fi xed to AUTO. • When the image quality mode is set to [RAW], the image is recorded in RAW+JPEG.

image. You can also shoot several images and perform HDR imaging on a computer (HDR bracketing photography). 1 Set the lever to position 1 and press the jYHDR button to display the selection items. • A menu will be displayed on the screen. HDR button Lever AUTO AUTO o T S S Y12s Y12s Y2s Y2s Yc Yc P HDR OFF OFF 3F 2.0EV 3F 3F 3F 2.0EV 2.0EV 2.0EV HDR1 HDR1 HDR2 HDR2 7F 2.0EV 7F 7F 7F 2.0EV 2.0EV 2.0EV 5F 2.0EV 5F 5F 5F 2.0EV 2.0EV 2.0EV 3F 3.0EV 3F 3F 3F 3.0EV 3.0EV 3.0EV j�Y o When shooting using live view 2 Turn the front dial to select a setting. HDR1 Four shots are taken, each with a different exposure, and the shots are combined into one HDR image inside the camera. HDR2 provides a more impressive image than HDR1. ISO sensitivity is fi xed to 200. Also, the slowest available shutter speed is 1 second and the longest available exposure is 4 seconds. HDR2 3F 2.0EV HDR bracketing is performed. Select the number of images and the exposure difference. HDR imaging processing is not performed. 5F 2.0EV 7F 2.0EV 3F 3.0EV 5F 3.0EV 3 Shoot. • When you press the shutter button, the camera automatically shoots the set number of images. • While shooting, a simply composed image will be displayed on the monitor or in the viewfi nder. # Cautions • In the case of HDR1 and HDR2, exposure compensation is not available. • If you shoot with a slower shutter speed, there may be more noticeable noise. • Attach the camera to a tripod or other stabilizing item and then shoot. • The image displayed on the monitor or in the viewfi nder while shooting will differ from the HDR-processed image. • In the case of HDR1 and HDR2, the HDR-processed image will be saved as a JPEG fi le. When the image quality mode is set to [RAW], the image is recorded in RAW+JPEG. The only image recorded in RAW is the image with suitable exposure. • If set to HDR1/HDR2, the picture mode is fi xed to [Natural] and the color setting is fi xed to [sRGB]. [Full-time AF] does not operate. • Flash photography, bracketing, multiple exposure and time lapse shooting cannot be used at the same time as HDR photography.

Playback image information Simplifi ed display Overall display F5.6 F5.6 +1.0 +1.0 G+4 G+4 A+4 A+4 Adobe Adobe Natural Natural ISO 400 ISO 400 250 250 +2.0 +2.0 45mm 45mm 1/8 4608×3456 ×10 ×10 4:3 L N 3D 3D 2013.10.01 12:30 15 100-0015 WB AUTO P SD AF ±0 ±0 o l m n p r q k j uts w x h g i v 2013.10.01 12:30 15 100-0015 ×10 ×10 4:3 L N 3D 3D SD f 0 a 4 1 5 789 b d c e 2 3 6 1 Battery check ..................................P. 16 2 Wi-Fi connection .....................P. 27, 119 3 Including GPS information ............P. 121 4 Eye-Fi upload complete ..................P. 98 5 Print reservation Number of prints ...........................P. 112 6 Share order .....................................P. 62 7 Sound record ..................................P. 64 8 Protect ............................................P. 64 9 Image selected ...............................P. 33 0 File number .....................................P. 96 a Frame number b Storage device ..............................P. 123 c Record mode ..................................P. 70 d Aspect ratio .....................................P. 69 e 3D image ........................................P. 45 f Date and time .................................P. 17 g Aspect border .................................P. 69 h AF target .........................................P. 52 i Shooting mode...................P. 18, 38 – 46 j Exposure compensation .................P. 49 k Shutter speed ..........................P. 38 – 41 l Aperture value .........................P. 38 – 41 m Focal length ..................................P. 128 n Flash intensity control .....................P. 71 o White balance compensation p Color space.....................................P. 95 q Picture mode...................................P. 68 r Compression rate ...........................P. 70 s Pixel count ......................................P. 70 t ISO sensitivity .................................P. 57 u White balance .................................P. 56 v AF Focus adjustments ..................P. 107 w Metering mode ................................P. 72 x Histogram .......................................P. 37 Switching the information display You can switch the information displayed in the monitor during playback using the INFO button. F5.6 F5.6 ±0.0 ±0.0 G±10 G±10 A±10 A±10 Adobe Adobe Natural Natural ISO 400 ISO 400 250 250 +2.0 +2.0 45mm 45mm 1/8 4032×3024 ×10 ×10 4:3 L N 2013.10.01 12:30 15 100-0015 WB AUTO P AF ±0 ±0 2013.10.01 12:30 15 100-0015 4:3 L N ×10 ×10 INFO INFO INFO INFO INFO INFO Overall display Simplifi ed display Image only

Press the q button to view pictures full frame. Press the shutter button halfway to return to shooting mode. Index display/calendar display 25 frames Index display Q q p q p Single-frame playback Calendar display 2013.10 Sun Mon Tue Wed Thu Fri Sat 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 3 4 5 6 7 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 3 4 5 6 7 2013.10.01 12:30 21 2013.10.01 12:30 20 100-0020 L N Playback zoom (close-up playback) 2× zoom close-up playback Single-frame playback 14× zoom 2x q q p p 2013.10.01 12:30 20 L N 100-0020 14x Rear dial (o) Zoom in (p)/Index (q) Front dial (r) Previous (t)/Next (s) Operation also available during close-up playback. Arrow pad (FGHI) Single-frame playback: Next (I)/previous (H)/playback volume (FG) Close-up playback: Scroll image You can display the next frame (I) or the previous frame (H) during close-up playback by pressing the INFO button. Index/calendar playback: Highlight image Fn1 Displays a zoom frame. Use touch operations to set the position of the frame and press Fn1 to zoom in. To cancel, press Fn1. INFO View image info H Select picture (P. 33) AEL/AFL Protect picture (P. 32)  Delete picture (P. 33) Q View menus (in calendar playback, press this button to exit to single-frame playback)

You can connect the camera to a smartphone over wireless LAN (P. 119). Once the smartphone is connected, you can use it view images stored on the card, and transfer images between the camera and smartphone. With [Share Order], you can select the images to share in advance. 1 On the playback screen, touch the screen. • A touch menu will be displayed. 2 Select an image using a touch operation or HI and then touch h on the touch menu. • h is displayed on the images selected for sharing. • To cancel the selection, touch h again. 3 Touch the screen to exit [Share Order]. • After an image has been selected for sharing, the selected image will be shared when a Wi-Fi connection is established using [One-Time]. # Cautions • You can set a share order on a maximum around 200 frames. • Not available for [SD] or [HD] movies.

Press Q during playback to display a menu of simple options that can be used in playback mode. JPEG m R Rotate JPEG Edit Back Set Share Order Still image frame Movie frame JPEG Edit, RAW Data Edit g P. 85, 86  — Image Overlay g P. 87  — Movie Play —  Share Order gP. 62  * 0 (Protect)   R (Audio recording)  — Rotate  — m (Slideshow)   Erase   * Not available for [SD] or [HD] movies. Performing operations on a movie frame (Movie Play) Q Pause or resume playback. • You can perform the following operations while playback is paused. HIor dial Previous/Next Press and hold HI to continue the operation. F Display the fi rst frame. G Display the last frame. H/I Advance or rewind a movie. F/G Adjust volume. # Cautions • We recommend using the supplied PC software to play movies on a computer. Before launching the software for the fi rst time, connect the camera to the computer.

wish to protect and press Q to display the playback menu. Select [0] and press Q, and then press F to protect the image. Protected images are shown by a 0 (protect) icon. Press G to remove protection. Press Q to save settings and exit. You can also protect multiple selected images. g Selecting images 2013.10.01 12:30 20 100-0020 L N 4:3 0 (protect) icon # Cautions • Formatting the card erases all images even if they have been protected. Audio recording Add an audio recording (up to 30 sec. long) to the current photograph. 1 Display the image to which you want to add an audio recording and press Q. • Audio recording is not available with protected images. • Audio recording is also available in the playback menu. 2 Select [R] and press Q. • To exit without adding a recording, select [No]. JPEG m R Rotate JPEG Edit Back Set Share Order 3 Select [R Start] and press Q to begin recording. • To stop recording part-way through, press Q. 4 Press Q to end recording. • Images with audio recordings are indicated by a H icon. • To delete a recording, select [Erase] in Step 2. R R Start No Erase Back Set Rotate Choose whether to rotate photographs. 1 Play the photograph back and press Q. 2 Select [Rotate] and press Q. 3 Press F to rotate the image counterclockwise, G to rotate it clockwise; the image rotates each time the button is pressed. • Press Q to save settings and exit. • The rotated image is saved in its current orientation. • Movies, 3D photos, and protected images cannot be rotated.

1 Press Q during playback and select [m]. JPEG m R Rotate JPEG Edit Back Set Share Order 2 Adjust settings. Start Start the slideshow. Images are displayed in order, starting with the current picture. BGM Set BGM or turn BGM [Off]. Slide Set type of slideshow to execute. Slide Interval Choose the length of time each slide is displayed from 2 to 10 seconds. Movie Interval Select [Full] to include full-length movie clips in the slideshow, [Short] to include only the opening portion of each clip. 3 Select [Start] and press Q. • The slideshow will start. • Press Q to stop the slideshow. Volume Press FG during the slideshow to adjust the overall volume of the camera speaker. Press HI to adjust the balance between the background music and the sound recorded with photographs or movies. $ Notes • You can change [Joy] to different BGM. Record the data downloaded from the Olympus website onto the card, select [Joy] from [BGM] in step 2, and press I. Visit the following website for the download. http://support.olympus-imaging.com/bgmdownload/

6 6 Using shooting options Reducing camera shake (image stabilizer) You can reduce the amount of camera shake that can occur when shooting in low light situations or shooting with high magnifi cation. The image stabilizer starts when you press the shutter button halfway. 1 Press the Q button and select the image stabilizer. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 IS Mode When shooting using the viewfi nder When shooting using live view WB AUTO WB WB WB AUTO AUTO AUTO L N 4:3 j WB AUTO WB WB WB AUTO AUTO AUTO mm 50 mm 50 S-IS S-IS S-IS S-IS OFF OFF S-IS AUTO S-IS AUTO S-IS AUTO S-IS AUTO S-IS S-IS FullHD F P Focal Length Auto 2 Select an item using the front dial and press the Q button. Still picture OFF S-I.S. Off Image stabilizer is off. S-IS1 Auto Image stabilizer is on. S-IS2 Vertical IS Image stabilization applies only to vertical (Y) camera shake. Use when panning the camera horizontally. S-IS3 Horizontal IS Image stabilization applies only to horizontal (Z) camera shake. Use when panning the camera horizontally with the camera held in portrait orientation. S-IS AUTO Landscape Panning I.S. The camera detects the panning direction and applies the appropriate image stabilization. Movie OFF M-I.S. Off Image stabilizer is off. ON Movie-I.S. In addition to Auto image stabilization, camera shake that occurs when shooting while walking is also reduced. Choosing a focal length (Micro Four Thirds/Four Thirds System lenses excluded) Use focal length information to reduce camera shake when shooting with lenses that are not Micro Four Thirds or Four Thirds system lenses. • Select [Image Stabilizer], press the INFO button, use HI to select a focal length, and press Q. • Choose a focal length between 8 mm and 1000 mm. • Choose the value that most closely matches to the one that is printed on the lens.

6 # Cautions • The image stabilizer cannot correct excessive camera shake or camera shake that occurs when the shutter speed is set to the slowest speed. In these cases, it is recommended that you use a tripod. • When using a tripod, set [Image Stabilizer] to [OFF]. • When using a lens with an image stabilization function switch, priority is given to the lens side setting. • When priority is being given to the lens side image stabilization and the camera side is set to [S-IS-AUTO], [S-IS1] is used instead of [S-IS-AUTO]. • You may notice an operating sound or vibration when the image stabilizer is activated.

6 Processing options (picture mode) Select a picture mode and make individual adjustments to contrast, sharpness, and other parameters (P. 78). Changes to each picture mode are stored separately. 1 Press the Q button and select [Picture Mode]. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 Picture Mode When shooting using the viewfi nder When shooting using live view P Natural WB AUTO WB WB WB AUTO AUTO AUTO L N 4:3 M C j i h j j 4 j 5 S-IS AUTO S-IS AUTO FullHD F 2 Select an item using the front dial and press the Q button. h i-Enhance Produces more impressive-looking results suited to the scene. i Vivid Produces vivid colors. j Natural Produces natural colors. Z Muted Produces fl at tones. a Portrait Produces beautiful skin tones. J Monotone Produces black and white tone. K Custom Select one picture mode, set the parameters, and register the setting. v e-Portrait Produces smooth skin textures. Cannot be used with bracket photography or when shooting movies. c Color Creator Produces colors set using color creator (P. 58). j Pop Art Choose an art fi lter and select the desired effect. k Soft Focus l Pale&Light Color m Light Tone n Grainy Film o Pin Hole s Diorama t Cross Process u Gentle Sepia v Dramatic Tone Y Key Line Z Watercolor

6 Adding effects to a movie You can create movies that take advantage of the effects available in still photography mode. Set the dial to n to enable the settings. 1 Set the shooting mode to n, press the Q button, and use the rear dial to select a shooting mode item. P PP WB AUTO WB WB WB AUTO AUTO AUTO n P A SS M P S-AF S-AF j M-IS ON M-IS ON FullHD F Program Auto 2 Switch the shooting mode using the front dial and press the Q button. P Optimal aperture is set automatically according to the brightness of the subject. A Depiction of background is changed by setting the aperture. Use the rear dial to adjust the aperture. S Shutter speed affects how the subject appears. Use the rear dial to adjust the shutter speed. Shutter speed can be set to values between 1/30 s and 1/4000 s. M You control both aperture and shutter speed. Use the front dial to choose the aperture, the rear dial to select the shutter speed from values between 1/30 s and 1/4000 s. Sensitivity can be set manually to values between ISO 200 and 3200; auto ISO sensitivity control is not available. # Cautions • When recording a movie, you cannot change the settings for exposure compensation, aperture value, and shutter speed. • If [Image Stabilizer] is activated while recording a movie, the recorded image is enlarged slightly. • Stabilization is not possible when the camera shake is excessive. • When the inside of the camera becomes hot, shooting is automatically stopped to protect the camera. • With some art fi lters, [C-AF] operation is limited. • Cards with an SD speed class of 6 or above are recommended for movie recording. Setting the image aspect You can change the aspect ratio (horizontal-to-vertical ratio) when taking pictures. Depending on your preference, you can set the aspect ratio to [4:3] (standard), [16:9], [3:2], [1:1], or [3:4]. 1 Press the Q button and select an aspect ratio. 2 Select a setting using the front dial and press the Q button. # Cautions • JPEG images are cropped to the selected aspect ratio; RAW images, however, are not cropped but are instead saved with information on the selected aspect ratio. • When RAW images are played back, the selected aspect ratio is shown by a frame.

6 Image quality (record mode) Select an image quality for photographs and movies according their intended use, for example retouching on a computer or display on the web. 1 Press the Q button and select an image quality for photographs or movies. 250 250 F5.6 i NORM ISO AUTO AUTO WB AUTO 4:3 01:02:03 01:02:03 1023 1023 K When shooting using the viewfi nder When shooting using live view L F 4:3 P WB AUTO WB WB WB AUTO AUTO AUTO S-IS AUTO S-IS AUTO RAW RAW L M N S N 38 38 L F+ RAW F+ F+ F+ RAW RAW RAW N N FullHD F 4608x3456 Record mode 2 Select an item using the front dial and press the Q button.   Record modes (still images) Choose from RAW and JPEG (YF, YN, XN, and WN) modes. Choose a RAW+JPEG option to record both a RAW and a JPEG image with each shot. JPEG modes combine image size (Y, X, and W) and compression ratio (SF, F, N, and B). Image size Compression rate Application Name Pixel count SF (Super Fine) F (Fine) N (Normal) B (Basic) Y (Large) 4608×3456* YSF YF* YN* YB Select for the print size X (Middle) 3200×2400 XSF XF XN* XB 2560×1920* 1920×1440 1600×1200 W (Small) 1280×960* WSF WF WN* WB For small prints and use on a website 1024×768 640×480 * Default RAW image data This format (extension “.ORF”) stores unprocessed image data for later processing. RAW image data cannot be viewed using other cameras or software, and RAW images cannot be selected for printing. JPEG copies of RAW images can be created using this camera. g “Editing still images” (P. 85)

6   Record modes (movies) Record mode Pixel count File format Application Full HD Fine 1920×1080 MPEG-4 AVC/ H.264*1 Display on TVs and other devices Full HD Normal 1920×1080 HD Fine 1280×720 HD Normal 1280×720 HD 1280×720 Motion JPEG*2 For computer playback or editing SD 640×480 • Depending on the type of card used, recording may end before the maximum length is reached. *1 Individual movies can be up to 29 minutes long. *2 Files may be up to 2GB in size. Adjusting fl ash output (fl ash intensity control) Flash output can be adjusted if you fi nd that your subject to appears overexposed, or is underexposed even though the exposure in the rest of the frame is just right. 1 Set the lever to position 2 and press the AFm button. AFm button Lever P Flash Auto AUTO AUTO 0 0.0 2 Select an item using the front dial and press the Q button. # Cautions • This setting has no effect when the fl ash control mode for the external fl ash unit is set to MANUAL. • Changes to fl ash intensity made with the external fl ash unit are added to those made with the camera.

6 Choosing how the camera measures brightness (metering) Choose how the camera meters subject brightness. 1 Set the lever to position 1 and press the AFm button. • You can also press the Q button to select metering. AFm button Lever AUTO AUTO P ESP HI HI SH SH Single AF S-AF S-AF C-AF C-AF MF MF S-AF S-AF MF C-AF C-AF TR S-AF S-AF 2 Turn the front dial to select an item. p Digital ESP metering The camera meters exposure in 324 areas of the frame and optimizes exposure for the current scene or (if an option other than [OFF] is selected for [I Face Priority]) portrait subject. This mode is recommended for general use. H Center weighted averaging metering This metering mode provides the average metering between the subject and the background lighting, placing more weight on the subject at the center. I Spot metering Choose this option to meter a small area (about 2% of the frame) with the camera pointed at the object you wish to meter. Exposure will be adjusted according to the brightness at the metered point. IHI Spot metering - highlight Increases spot metering exposure. Ensures bright subjects appear bright. ISH Spot metering - shadow Lowers spot metering exposure. Ensures dark subjects appear dark. 3 Press the shutter button halfway. • Normally, the camera will start metering when the shutter button is pressed halfway and lock exposure while the shutter button is held in this position.

6 Choosing a focus mode (AF mode) Select a focusing method (focus mode). You can choose separate focusing methods for still photography mode and n mode. 1 Set the lever to position 1 and press the AFm button. • You can also press the Q button to select AF mode. AFm button Lever AUTO AUTO P ESP HI HI SH SH Single AF S-AF S-AF C-AF C-AF MF MF S-AF S-AF MF C-AF C-AF TR S-AF S-AF 2 Turn the rear dial to select an item. • The selected AF mode is displayed on the monitor. S-AF (single AF) The camera focuses once when the shutter button is pressed halfway. When the focus is locked, a beep sounds, and the AF confi rmation mark and the AF target mark light up. This mode is suitable for taking pictures of still subjects or subjects with limited movement. C-AF (continuous AF) The camera repeats focusing while the shutter button remains pressed halfway. When the subject is in focus, the AF confi rmation mark lights up on the monitor and the beep sounds when the focus is locked at the fi rst and second time. Even if the subject moves or you change the composition of the picture, the camera continues trying to focus. MF (manual focus) This function allows you to manually focus on any subject. Near ) Focus ring S-AF+MF (simultaneous use of S-AF mode and MF mode) After pressing the shutter button halfway to focus in [S-AF] mode, you can turn the focus ring to fi ne-adjust focus manually. C-AF+TR (AF tracking) Press the shutter button halfway to focus; the camera then tracks and maintains focus on the current subject while the shutter button is held in this position. • The AF target is displayed in red if the camera can no longer track the subject. Release the shutter button and then frame the subject again and press the shutter button halfway. • With a Four Thirds system lens, the tracking range narrows. If the AF target is displayed in red, AF does not operate even if the subject is tracked. # Cautions • The camera may be unable to focus if the subject is poorly lit, obscured by mist or smoke, or lacks contrast. • When using a Four Thirds system lens, the AF will not operate while recording movies.

6 Movie sound options (recording sound with movies) 1 Press the Q button when shooting with live view and select a movie sound. When shooting using live view ON ON R n R OFF OFF ON ON i ISO AUTO ISO ISO ISO AUTO AUTO AUTO R Movie R On 2 Switch ON/OFF using the front dial and press the Q button. # Cautions • When recording sound in a movie, the sound made by the lens and camera operating may be recorded. If desired, you can reduce these sounds by shooting with [AF Mode] set to [S-AF], or by limiting the amount of times you press the buttons. You can use an external microphone. • No sound is recorded in s (Diorama) mode.

7 7 Basic menu operations The menus contain shooting and playback options that are not displayed by the live control, and let you customize the camera settings for easier use. W Preliminary and basic shooting options X Advanced shooting options q Playback and retouch options c Customizing camera settings (P. 90) # Accessory port menu options for accessory port devices such as EVF and OLYMPUS PENPAL (P. 108)* d Camera setup (e.g., date and language) * Not displayed at default settings. 1 Press the MENU button to display the menus. j 4:3 D 1 Shooting Menu 1 Card Setup Reset/Myset Picture Mode Image Aspect Back Set 2 Digital Tele-converter Off Press Q to confi rm the setting Operation guide Press the MENU button to go back one screen Tab 2 Use FG to select a tab and press Q. 3 Select an item using FG and press Q to display options for the selected item. 1 o j/Y 2 Time Lapse Settings Off Back Shooting Menu 2 Image Stabilizer Bracketing HDR Off Set Multiple Exposure # RC Mode Off Off Off The current setting is displayed Function Q 1 Off Time Lapse Settings Off Back Shooting Menu 2 Image Stabilizer Bracketing HDR j/Y Off Set 2 Multiple Exposure # RC Mode Off Off Y12s o Y2s T S YC 4 Use FG to highlight an option and press Q to select. • Press the MENU button repeatedly to exit the menu. $ Notes • For the default settings of each option, refer to “Menu directory” (P. 142). • A guide is displayed for about 2 seconds after you select an option. Press the INFO button to view or hide guides. Menu functions

7 Using Shooting Menu 1/Shooting Menu 2 j 4:3 D 1 Shooting Menu 1 Card Setup Reset/Myset Picture Mode Image Aspect Back Set 2 Digital Tele-converter Off W Card Setup (P. 76) Reset/Myset (P. 77) Picture Mode (P. 78) K (P. 79) Image Aspect (P. 69) Digital Tele-converter (P. 84) X j/Y (Sequential shooting/Self-timer) (P. 55, 79) Image Stabilizer (P. 66) Bracketing (P. 80) HDR (P. 84) Multiple Exposure (P. 82) Time Lapse Settings (P. 83) # RC Mode (P. 84) Formatting the card (Card Setup) Cards must be formatted with this camera before fi rst use or after being used with other cameras or computers. All data stored on the card, including protected images, is erased when the card is formatted. When formatting a used card, confi rm there are no images that you still want to keep on the card. g “Usable cards” (P. 123) 1 Select [Card Setup] in W Shooting Menu 1. 2 Select [Format]. All Erase Format Card Setup Back Set 3 Select [Yes] and press Q. • Formatting is performed.

7 Restoring default settings (Reset/Myset) Camera settings can be easily restored to registered settings. Using reset settings Restore default settings. 1 Select [Reset/Myset] in W Shooting Menu 1. 2 Select [Reset] and press Q. • Highlight [Reset] and press I to choose the reset type. To reset all settings except the time, date, and a few others, highlight [Full] and press Q. g “Menu directory” (P. 142) 3 Select [Yes] and press Q. Reset/Myset Reset Myset1 Myset2 Myset3 Myset4 No Data No Data No Data No Data Basic Back Set Saving Myset You can save the current camera settings for modes other than shooting mode. Saved settings can be called up in P, A, S, and M modes. 1 Adjust settings in order to save. 2 Select [Reset/Myset] in W Shooting Menu 1. 3 Select the desired destination ([Myset1]–[Myset4]) and press I. • [Set] appears next to destinations ([Myset1]–[Myset4]) to which settings have already been saved. Selecting [Set] again overwrites the registered setting. • To cancel the registration, select [Reset]. 4 Select [Set] and press Q. • Settings that can be saved to Myset g “Menu directory” (P. 142) Using Myset Sets the camera to the settings selected for Myset. 1 Select [Reset/Myset] in W Shooting Menu 1. 2 Select the desired settings ([Myset1]–[Myset4]) and press Q. 3 Select [Set] and press Q. Reset/Myset Reset Myset1 Myset2 Myset3 Myset4 Set Set Set Set Basic Back Set

7 Processing options (Picture Mode) You can make individual adjustments to contrast, sharpness and other parameters in [Picture Mode] (P. 68) settings. Changes to each picture mode are stored separately. 1 Select [Picture Mode] in W Shooting Menu 1. j 4:3 D 1 2 Shooting Menu 1 Card Setup Reset/Myset Picture Mode Image Aspect Back Set Digital Tele-converter Off 2 Select an option with FG and press Q. 3 Press I to display settings for the selected option. h i-a J K Contrast Distinction between light and dark     Sharpness Sharpness of the image     Saturation Vividness of the color   k  Gradation Adjust tone (gradation).     Auto Divides the image into detailed regions and adjusts the brightness separately for each region. This is effective for images with areas of large contrast in which the whites appear too bright or the blacks appear too dark. Normal Use [Normal] mode for general uses. High Key Gradation for a bright subject. Low Key Gradation for a dark subject. Effect (i-Enhance) Sets the extent that the effect will be applied.  k k  B&W Filter (Monotone) Creates a black and white image. The fi lter color is brightened and the complementary color is darkened. k k   N:Neutral Creates a normal black and white image. Ye:Yellow Reproduces clearly defi ned white cloud with natural blue sky. Or:Orange Slightly emphasizes colors in blue skies and sunsets. R:Red Strongly emphasizes colors in blue skies and brightness of crimson foliage. G:Green Strongly emphasizes colors in red lips and green leaves.

7 h i-a J K Pict. Tone (Monotone) Colors the black and white image. k k   N:Neutral Creates a normal black and white image. S:Sepia Sepia B:Blue Bluish P:Purple Purplish G:Green Greenish # Cautions • Changes to contrast have no effect at settings other than [Normal]. Image quality (K) Select an image quality. You can select a separate image quality for photographs and movies. This is the same as the [K] item in [Live Control]. • You can change the JPEG image size and compression ratio combination, and [X] and [W] pixel counts. [K Set], [Pixel Count] g “Using the custom menus” (P. 90) Setting the self timer (j/Y) You can customize the self timer operation. 1 Select [j/Y] in X Shooting Menu 2. 1 o j/Y 2 Time Lapse Settings Off Back Shooting Menu 2 Image Stabilizer Bracketing HDR Off Set Multiple Exposure # RC Mode Off Off Off 2 Select [YC] (custom) and press I. 3 Use FG to select the item and press I. • Use FG to select the setting and press Q. Frame Sets the number of frames to be shot. Y Timer Sets the time after the shutter button is pressed until the picture is taken. Interval Time Sets the shooting interval for the second and subsequent frames.

7 Varying settings over a series of photographs (bracketing) “Bracketing” refers to the act of varying settings automatically over a series of shots or a series of images to “bracket” the current value. You can store bracket shooting settings and turn bracket shooting off. 1 Select [Bracketing] in X Shooting Menu 2 and press Q. o j/Y 1 2 Time Lapse Settings Off Off Back Shooting Menu 2 Image Stabilizer Bracketing HDR Off Set Multiple Exposure # RC Mode Off Off 2 After selecting [On], press I and select a bracket shooting type. • When you select bracket shooting, t appears on the screen. AE BKT WB BKT FL BKT ISO BKT ART BKT -- -- -- 3f 1.0EV A-- G-- Bracketing Back Set 3 Press I, select settings for parameters such as the number of shots, and then press the Q button. • Continue to press the Q button until you return to the screen in step 1. • If you select [Off] in step 2, bracket shooting settings will be saved and you can shoot normally. % Tips • You can also use button operations for bracket settings. Set the lever to position 2 and turn the dial while pressing the jYHDR button. Select the bracket shooting type using the front dial and the number of shots and other parameters using the rear dial. After performing the settings, you can switch between bracket photography and normal photography each time you press the jYHDR button. # Cautions • Cannot be used during HDR photography. • Cannot be used at the same time as multiple exposure and time lapse shooting. AE BKT (AE bracketing) The camera varies the exposure of each shot. The modifi cation amount can be selected from 0.3 EV, 0.7 EV, or 1.0 EV. In single-frame shooting mode, one photograph is taken each time the shutter button is pressed all the way down, while in sequential shooting mode the camera continues to take shots in the following order while the shutter button is pressed all the way down: no modifi cation, negative, positive. Number of shots: 2, 3, 5, or 7 • The t indicator turns green during bracketing. • The camera modifi es exposure by varying aperture and shutter speed (mode P), shutter speed (modes A and M), or aperture (mode S). • The camera brackets the value currently selected for exposure compensation. • The size of the bracketing increment changes with the value selected for [EV Step]. g “Using the custom menus” (P. 90) AE BKT WB BKT FL BKT ISO BKT ART BKT -- -- -- -- A-- G-- -- 2f 0.7EV 2f 0.3EV 2f 1.0EV 3f 0.3EV 3f 0.7EV 3f 1.0EV Off Bracketing Back Set

7 WB BKT (WB bracketing) Three images with different white balances (adjusted in specifi ed color directions) are automatically created from one shot, starting with the value currently selected for white balance. WB bracketing is available in P, A, S and M modes. • White balance can be varied by 2, 4, or 6 steps on each of the A – B (Amber – Blue) and G – M (Green – Magenta) axes. • The camera brackets the value currently selected for white balance compensation. • No pictures will be taken during WB bracketing if there is not enough memory on the card for the selected number of frames. A-B G-M WB BKT 3f 4Step 3f 4Step Back Set FL BKT (FL bracketing) The camera varies fl ash level over three shots (no modifi cation on the fi rst shot, negative on the second, and positive on the third). In single-frame shooting, one shot is taken each time the shutter button is pressed; in sequential shooting, all shots are taken while the shutter button is pressed. • The t indicator turns green during bracketing. • The size of the bracketing increment changes with the value selected for [EV Step]. g “Using the custom menus” (P. 90) AE BKT WB BKT FL BKT ISO BKT ART BKT -- -- -- -- A-- G-- 3f 0.7EV 3f 0.3EV 3f 1.0EV Off Bracketing Back Set ISO BKT (ISO bracketing) The camera varies the sensitivity over three shots while keeping the shutter speed and aperture fi xed. The modifi cation amount can be selected from 0.3 EV, 0.7 EV, or 1.0 EV. Each time the shutter button is pressed, the camera shoots three frames with the set sensitivity (or if auto sensitivity is selected, the optimal sensitivity setting) on the fi rst shot, negative modifi cation on the second shot, and positive modifi cation on the third shot. • The size of the bracketing increment does not change with the value selected for [ISO Step]. g “Using the custom menus” (P. 90) • Bracketing is performed regardless of the upper limit set with [ISO-Auto Set]. g “Using the custom menus” (P. 90) AE BKT WB BKT FL BKT ISO BKT ART BKT -- -- -- -- A-- G-- 3f 0.7EV 3f 0.3EV 3f 1.0EV Off Bracketing Back Set ART BKT (ART bracketing) Each time the shutter is released, the camera records multiple images, each with a different art fi lter setting. You can turn art fi lter bracketing on or off separately for each picture mode. • Recording may take some time. • ART BKT cannot be combined with WB BKT or ISO BKT. ART BKT Pop Art Light Tone Pin Hole Diorama Soft Focus Pale&Light Color Grainy Film Back

7 Recording multiple exposures in a single image (multiple exposure) Record multiple exposures in a single image, using the option currently selected for image quality. 1 Select [Multiple Exposure] in X Shooting Menu 2. 2 Adjust settings. Frame Select [2f]. Auto Gain When set to [On], the brightness of each frame is set to 1/2 and the images are overlaid. When set to [Off], the images are overlaid with the original brightness of each frame. Overlay When set to [On], a RAW image recorded on a card can be overlaid with multiple exposures and stored as a separate image. The number of pictures taken is one. • a is displayed in the monitor while multiple exposure is in effect. Multiple Exposure Frame Auto Gain Overlay Off Off Off Set Back 250 F5.6 ISO 400 0.0 0.0 01:02:03 01:02:03 38 38 P 3 Shoot. • a is displayed in green when shooting starts. • Press  to delete the last shot. • The previous shot is superimposed on the view through the lens as a guide to framing the next shot. % Tips • To overlay 3 or more frames: Select RAW for [K] and use the [Overlay] option to make repeated multiple exposures. • For more information on overlaying RAW images: g [Edit] (P. 85) # Cautions • The camera will not go to sleep while multiple exposure is in effect. • Photographs taken with other cameras cannot be included in a multiple exposure. • When [Overlay] is set to [On], the images displayed when a RAW image is selected are developed with the settings at the time of shooting. • To set the shooting functions, cancel multiple exposure shooting fi rst. Some functions cannot be set. • Multiple exposure is cancelled automatically from the fi rst picture in the following situations. The camera is turned off/The q button is pressed/The MENU button is pressed/The shooting mode is set to a mode other than P, A, S, M/The battery power runs out/Any cable is connected to the camera • When a RAW image is selected using [Overlay], the JPEG image for the image recorded in RAW+JPEG is displayed. • When shooting multiple exposures using bracketing, priority is given to multiple exposure shooting. While the overlay image is being saved, bracketing is reset to the factory default setting.

7 Shooting automatically with a fi xed interval (time lapse shooting) You can set the camera to shoot automatically with a set time lapse. The shot frames can also be recorded as into a single movie. This setting is only available in P/A/S/M modes. 1 Perform the following settings under [Time Lapse Settings] in X Shooting Menu 2. Frame Sets the number of frames to be shot. Start Waiting Time Sets waiting time before starting to shot. Interval Time Sets interval between shots after shooting starts. Time Lapse Movie Sets recording format of frame sequence. [Off]: Records each frame as a still picture. [On]: Records each frame as a still picture and generates and records a single movie from the frame sequence. • The image quality of the movie is [M-JPEG HD] and the frame rate 10fps. 2 Shoot. • Frames are shot even if the image is not in focus after AF. If you wish to fi x the focus position, shoot in MF. • [Rec View] operates for 0.5 seconds. • If either of the time before shooting, or shooting interval is set to 1 minute 30 seconds or longer, the monitor and camera power will turn off after 1 minute. 10 seconds before shooting, the power will automatically turn on again. When the monitor is off, press the shutter button to turn it on again. % Tips • Longer shooting times are possible using a power battery holder (sold separately) (P. 129) and an AC adaptor. A maximum of 999 shots are possible. # Cautions • If the AF mode is set to [C-AF] or [C-AF+TR], it is automatically changed to [S-AF]. • Touch operations are disabled during time lapse shooting. • Cannot be used with HDR photography. • Bracketing and multiple exposure cannot be used together. • The fl ash will not work if the fl ash charging time is longer than the interval between shots. • For [BULB] and [TIME] shooting, the shutter speed is fi xed to 60 seconds. • If the camera automatically turns off in interval between shots, it will turn on in time for the next shot. • If the any of the still pictures are not recorded correctly, the time lapse movie will not be generated. • If there is insuffi cient space on the card, the time lapse movie will not be recorded. • Time lapse shooting will cancelled if any of the following is operated: Mode dial, MENU button, q button, lens release button, or connecting the USB cable. • If you turn off the camera, time lapse shooting will be cancelled. • If there is not enough charge left on the battery, the shooting may end partway through. Make sure the battery is suitably charged before starting.

7 Wireless remote control fl ash photography You can use the supplied fl ash and a fl ash equipped with the RC mode function to perform wireless fl ash photography. g “Wireless remote control fl ash photography” (P. 131) Digital Zoom (Digital Tele-converter) Digital Tele-converter is used to zoom in beyond the current zoom ratio. The camera saves the center crop. Zoom is increased by about 2×. 1 Select [On] for [Digital Tele-converter] in W Shooting Menu 1. 2 The view in the monitor will be enlarged by a factor of two. • The subject will be recorded as it appears in the monitor. # Cautions • Digital zoom is not available with multiple exposures, in J mode, or when T, s, f, w, or m is selected in SCN mode. • This function is not available when [Movie Effect] is [On] in n mode. • When a RAW image is displayed, the area visible in the monitor is indicated by a frame. • AF target drops. HDR photography Automatically shoot an HDR combination image, or shoot bracketing images to be used for HDR combining. This is the same as pressing the HDR button to perform settings (P. 59).

7 Using the playback menu m R 2 1 Playback Menu Edit Set Reset Protect Connection to Smartphone Back On Print Order m (P. 65) R (P. 85) Edit (P. 85) Print Order (P. 112) Reset Protect (P. 87) Connection to Smartphone (P. 87) Displaying images rotated (R) When set to [On], photographs taken with the camera rotated in portrait orientation are automatically rotated and displayed in portrait orientation. Editing still images Recorded images can be edited and saved as new images. 1 Select [Edit] in the q Playback Menu and press Q. 2 Use FG to select [Sel. Image] and press Q. 3 Use HI to select the image to be edited and press Q. • [RAW Data Edit] is displayed if the picture is a RAW image, [JPEG Edit] if it is a JPEG image. If the image was recorded in RAW+JPEG format, both [RAW Data Edit] and [JPEG Edit] will be displayed. Select the menu for the image to be edited. 4 Select [RAW Data Edit] or [JPEG Edit] and press Q. RAW Data Edit Create a JPEG copy of a RAW image edited according to the settings. [Current] The JPEG copy is processed using the current camera settings. Adjust the camera settings before choosing this option. [Custom1] Editing can be performed while changing the settings on the monitor. You can save the settings used. [Custom2] ART BKT The image is edited using settings for the selected art fi lter.

7 JPEG Edit Choose from the following options: [Shadow Adj]: Brightens a dark backlit subject. [Redeye Fix]: Reduces the red-eye phenomenon during fl ash shooting. [P]: Use the dial to choose the size of the crop and FGHI to position the crop. O Set [Aspect]: Changes the aspect ratio of images from 4:3 (standard) to [3:2], [16:9], [1:1], or [3:4]. After changing the aspect ratio, use FGHI to specify the trimming position. [Black & White]: Creates black and white images. [Sepia]: Creates sepia-toned images. [Saturation]: Sets the color depth. Adjust the color saturation checking the picture on the screen. [Q]: Converts the image fi le size to 1280 × 960, 640 × 480, or 320 × 240. Images with an aspect ratio other than 4:3 (standard) are converted to the closest image fi le size. [e-Portrait]: Makes skin look smooth and translucent. You may not be able to compensate depending on the image if face detection fails. 5 When the settings are complete, press Q. • The settings will be applied to the image. 6 Select [Yes] and press Q. • The edited image is stored in the card. # Cautions • Movies and 3D photos cannot be edited. • Red-eye correction may not work depending on the image. • Editing of a JPEG image is not possible in the following cases: When an image is processed on a PC, when there is not enough space in the card memory, when an image is recorded on another camera • When resizing ([Q]) an image, you cannot select a larger number of pixels than was originally recorded. • [P] and [Aspect] can only be used to edit images with an aspect ratio of 4:3 (standard). • When [Picture Mode] is set to [ART], [Color Space] is locked to [sRGB].

7 Image overlay Up to 3 frames of RAW images taken with the camera can be overlaid and saved as a separate image. The image is saved with the record mode set at the time the image is saved. (If [RAW] is selected, the copy will be saved in [YN+RAW] format.) 1 Select [Edit] in the q Playback Menu and press Q. 2 Use FG to select [Image Overlay] and press Q. 3 Select the number of images in the overlay and press Q. 4 Use FGHI to select the RAW images that will be used in the overlay. • When you have selected the number of images specifi ed in Step 3, the overlay will be displayed. RAW RAW RAW RAW RAW RAW RAW Image Overlay Back Set 5 Adjust gain. • Use HI to select an image and use FG to adjust gain. • Gain can be adjusted in the range 0.1 – 2.0. Check the results in the monitor. Image Overlay Back Set ×1.5 ×1.5 ×0.3 ×0.5 6 Press Q. A confi rmation dialog will be displayed; select [Yes] and press Q. % Tips • To overlay 4 or more frames, save the overlay image as a RAW fi le and use [Image Overlay] repeatedly. Audio recording Add an audio recording (up to 30 sec. long) to the current photograph. This is the same function as [R] during playback. (P. 64) Canceling all protections This function lets you cancel the protection of several images at one time. 1 Select [Reset Protect] in the q Playback Menu. 2 Select [Yes] and press Q. Using the Smartphone connection option (Connection to Smartphone) The camera can connect to a smartphone by using the wireless LAN function. Once connected camera images can be viewed on and transferred to the other device. g “Using the camera wireless LAN function” (P. 119)

7 Using the setup menu Use the Setup Menu to set the basic camera functions. --.--.-- --:-- X W j±0 k±0 2 1 Setup Menu English 0.5sec Wi-Fi Settings c/# Menu Display Firmware Rec View Back Set Option Description g X (Date/time setting) Set the camera clock. 17 W (Changing the display language) You can change the language used for the on-screen display and error messages from English to another language. — i (Monitor brightness adjustment) You can adjust the brightness and color temperature of the monitor. Color temperature adjustment will affect only the monitor display during playback. Use HI to highlight j (color temperature) or k (brightness) and FG to adjust the value. Press the INFO button to switch between [Natural] and [Vivid] monitor color display. -2 j +1 k Vivid Natural Back Set — Rec View Choose whether pictures are displayed immediately after shooting and for how long. This is useful for making a brief check of the picture you have just taken. Pressing the shutter button halfway while checking the picture lets you resume shooting immediately. [0.3sec] – [20sec]: Selects the number of seconds to display each picture. [Off]: The picture being recorded to the card is not displayed. [Autoq]: Displays the image being recorded, and then switches to playback mode. This is useful for erasing a picture after checking it. — Wi-Fi Settings Set up the camera to connect to a smartphone with Wi-Fi connectivity using the wireless function on the camera. 89 c/# Menu Display Choose whether to display the custom or accessory port menu. 108 Firmware Your product’s fi rmware version will be displayed. When you make inquiries about your camera or accessories or when you want to download software, you will need to state which version of each of the products you are using. —

7 Setting up a wireless LAN connection (Wi-Fi Settings) To use the wireless LAN functions on the camera (P. 119), you need to make setting such as the password to be used when connecting. [Private] and [One-Time] for a one-time connection are available. Setting password selection method 1 Select [Wi-Fi Settings] in the d Setup Menu and press Q. 2 Select [Wi-Fi Connect Settings] and press I. 3 Select the wireless LAN connection method and press Q. • [Private]: Connect using a preset password. • [One-Time]: Connect using a different password each time. • [Select]: Select which method to use each time. • [Off]: The Wi-Fi function is turned off. Changing private connection password Change the password used for [Private]. 1 Select [Wi-Fi Settings] in the d Setup Menu and press Q. 2 Select [Private Password] and press I. 3 Follow the operation guide and press the R button. • A new password will be set. Cancelling image sharing Deselects images selected for sharing (P. 62) when connected to a wireless LAN network. 1 Select [Wi-Fi Settings] in the d Setup Menu and press Q. 2 Select [Reset share Order] and press I. 3 Select [Yes] and press Q. Initializing wireless LAN settings Initializes content of [Wi-Fi Settings]. 1 Select [Wi-Fi Settings] in the d Setup Menu and press Q. 2 Select [Reset Wi-Fi Settings] and press I. 3 Select [Yes] and press Q.

7 Using the custom menus Camera settings can be customized using the c Custom Menu. Custom Menu R AF/MF (P. 90) S T U V W X 2 1 R Custom Menu Set AF/MF Button/Dial/Lever Release/j Disp/8/PC Exp/p/ISO # Custom K/Color/WB Back S Button/Dial/Lever (P. 91) T Release/j (P. 91) U Disp/8/PC (P. 92) V Exp/p/ISO (P. 93) W # Custom (P. 94) X K/Color/WB (P. 95) Y Record/Erase (P. 96) Z Movie (P. 97) b Built-In EVF (P. 97) k K Utility (P. 98) R AF/MF Option Description g AF Mode Choose the AF mode. This is the same as the live control setting. You can set separate focusing methods for still photography mode and n mode. 73 Full-time AF If [On] is selected, the camera will continue to focus even when the shutter button is not pressed halfway. Cannot be used when using a Four Thirds system lens. — AEL/AFL Customize AF and AE lock. 98 Reset Lens When set to [On], this resets the focus of the lens (infi nity) each time the power is turned off. The focus of power zoom lenses is also reset. — BULB/TIME Focusing Normally focus locks during the exposure when manual focus (MF) is selected. Select [On] to allow focusing using the focus ring. — Focus Ring You can customize how the lens adjusts to the focal point by selecting the rotational direction of the focus ring. — MF Assist When set to [On], you can automatically switch to zoom or peaking in manual focus mode by rotating the focus ring. 99 P Set Home Choose the AF target position that will be saved as the home position. p appears in the AF target selection display while you choose a home position. — MENU c R

7 Option Description g AF Illuminat. Select [Off] to disable the AF illuminator. — I Face Priority Select the face priority AF mode. This is the same as the live control setting. 53 AF Area Pointer If you select [Off], the AF target frame will not be displayed during confi rmation. — C-AF Lock When [AF Mode] (P. 73) is set to [C-AF], the AF does not adjust to sudden changes in subject distance. Depending on the sensitivity selected, the time it takes for the AF to adjust will change. — S Button/Dial/Lever Option Description g Button Function Choose the function assigned to the selected button. [UFunction], [VFunction], [RFunction], [tFunction], [YFunction], [ZFunction], [IFunction], [GFunction], [nFunction], [mFunction], [nFunction], [lFunction] 99 Dial Function You can change the functions assigned to the rear dial and front dial. — Dial Direction Choose the direction in which the dial is rotated to adjust shutter speed or aperture. Change the program shift direction. — Mode Dial Function Customize the shooting mode set by the mode dial. You can apply saved Myset settings. [Myset1] - [Myset4] (P. 77) can be selected when the settings are registered. — t Lever Function You can use the positioning of the lever to change the function of the dials and button. 101 u+v If you select [Off], you cannot switch the v button function even if you switch the lever. — T Release/j Option Description g Rls Priority S If [On] is selected, the shutter can be released even when the camera is not in focus. This option can be set separately for S-AF (P. 73) and C-AF (P. 73) modes. — Rls Priority C j L fps Choose the frame advance rates for [S] and [T]. Figures are the approximate maximums. 55 j H fps j + IS Off When set to [Off], the image stablizer will turn on for sequential shooting. — Half Way Rls With IS If set to [On], image stabilization operates when you press shutter button halfway. — MENU c S MENU c T R AF/MF MENU c R

7 Option Description g Lens I.S. Priority If [On] is selected, priority is given to the lens function operation when using a lens with an image stabilization function. — Release Lag-Time If [Short] is selected, the time lag between fully pressing the shutter button and the shot being taken can be shortened.* — * This will shorten the battery life. Also make sure that the camera is not subject to sharp impacts while in use. Such impacts may cause the monitor to stop displaying subjects. If this happens, turn the power off and on again. U Disp/8/PC Option Description g HDMI [HDMI Out]: Selecting the digital video signal format for connecting to a TV via an HDMI cable. [HDMI Control]: Select [On] to allow the camera to be operated using remotes for TVs that support HDMI control. 101 Video Out Choose the video standard ([NTSC] or [PAL]) used in your country or region. 101 KControl Settings Choose the controls displayed in each shooting mode. Controls Shooting mode P/A/ S/M A ART SCN Live Control (P. 30)     Live SCP (P. 104)     Live Guide (P. 28) –  – – Art Menu – –  – Scene Menu – – –  103 G/Info Settings Choose the information displayed when the INFO button is pressed. [q Info]: Choose the information displayed in full frame playback. [LV-Info]: Choose the information displayed when the camera is in shooting mode. [G Settings]: Choose the information displayed in index and calendar playback. 105, 106 Displayed Grid Select [w], [x], [y], [X] or [x] to display a grid on the monitor. — Picture Mode Settings Display only the selected picture mode when a picture mode is selected. — Histogram Settings [Highlight]: Choose the lower bound for the highlight display. [Shadow]: Choose the upper bound for the shadow display. 105 Mode Guide Choose [Off] to not display help for the selected mode when the mode dial is rotated to a new setting. 18 Live View Boost If [On] is selected, priority will be given to making images clearly visible; the effects exposure compensation and other settings will not be visible in the monitor. — MENU c U T Release/j MENU c T

7 Option Description g Frame Rate Select [High] to reduce frame lag. However, the image quality may drop. — Art LV Mode [mode1]: The fi lter effect is always displayed. [mode2]: Filter effects are not visible in the monitor while the shutter button is pressed halfway. Choose for a smooth display. — Expand LV Dyn. Range If you select [Off], the viewfi nder and monitor will be displayed normally during HDR shooting. 59 Flicker reduction Reduce the effects of fl icker under some kinds of lighting, including fl uorescent lamps. When fl icker is not reduced by the [Auto] setting, set to [50Hz] or [60Hz] in accordance with the commercial power frequency of the region where the camera is used. — LV Close Up Mode [mode1]: Pressing the shutter button halfway cancels zoom. [mode2]: Zoom is not cancelled when the shutter button is pressed halfway. 54 Peaking Settings You can switch the edge enhancement color between white and black. — Backlit LCD If no operations are performed for the selected period, the backlight will dim to save battery power. The backlight will not dim if [Hold] is selected. — Sleep The camera will enter sleep (energy saving) mode if no operations are performed for the selected period. The camera can be reactivated by pressing the shutter button halfway. — Auto Power Off Sets camera to turn off after a set period. — 8 (Beep sound) When set to [Off], you can turn off the beep sound that is emitted when the focus locks by pressing the shutter button. — USB Mode Choose a mode for connecting the camera to a computer or printer. Choose [Auto] to display USB mode options every time the camera is connected. — V Exp/p/ISO Option Description g EV Step Choose the size of the increments used when selecting shutter speed, aperture, exposure compensation, and other exposure parameters. — Noise Reduct. This function reduces the noise that is generated during long exposures. [Auto]: Noise reduction is performed at slow shutter speeds, or when the internal temperature of the camera has risen. [On]: Noise reduction is performed with every shot. [Off]: Noise reduction off. • Noise reduction requires about twice the time needed to record the image. • Noise reduction turns off automatically during sequential shooting. • This function may not work effectively with some shooting conditions or subjects. 41 MENU c V U Disp/8/PC MENU c U

7 Option Description g Noise Filter Choose the amount of noise reduction performed at high ISO sensitivities. — ISO Set ISO sensitivity. 57 ISO Step Select the increments available for choosing ISO sensitivity. — ISO-Auto Set Choose the upper limit and default value used for ISO sensitivity when [Auto] is selected for ISO. [High Limit]: Choose the upper limit for auto ISO sensitivity selection. [Default]: Choose the default value for auto ISO sensitivity selection. — ISO-Auto Choose the shooting modes in which [Auto] ISO sensitivity is available. [P/A/S]: Auto ISO sensitivity selection is available in all modes except M. ISO sensitivity is fi xed at ISO200 in mode M. [All]: Auto ISO sensitivity selection is available in all modes. — Metering Choose a metering mode according to the scene. 72 AEL Metering Choose the metering method used for AE lock (P. 98). [Auto]: Use the currently selected metering method. — BULB/TIME Timer Choose the maximum exposure for bulb and time photography. — BULB/TIME Monitor Sets the monitor brightness when [BULB], or [TIME] is used. Also sets the brightness of the external electronic viewfi nder. — Live BULB Choose the display interval during shooting. Some restrictions apply. The frequency drops at high ISO sensitivities. Choose [Off] to disable the display. Tap the monitor or press the shutter button halfway to refresh the display. — Live TIME — Anti-Shock z Choose the delay between the shutter button being pressed and the shutter being released. This diminishes camera shake caused by vibrations. This feature is useful in situations such as microscope photography and astrophotography. It is also useful for sequential shooting (P. 55) and self timer photography (P. 55). — W # Custom Option Description g # X-Sync. Choose the shutter speed used when the fl ash fi res. 106 # Slow Limit Choose the slowest shutter speed available when a fl ash is used. 106 w+F When set to [On], it will be added to the exposure compensation value and fl ash intensity control will be performed. 49, 71 MENU c W V Exp/p/ISO MENU c V

7 X K/Color/WB Option Description g K Set You can select the JPEG image quality mode from combinations of three image sizes and four compression rates. 1) Use HI to select a combination ([K1] – [K4]) and use FG to change. 2) Press Q. F 1 SF Y 2 F X 3 N W 4 SF W D Set Pixel Count Back Set Compression rate Image size 70 Pixel Count Choose the pixel count for [X]- and [W]-size images. 1) Select [Xiddle] or [Wmall] and press I. 2) Choose a pixel count and press Q. Xiddle Wmall 2560×1920 1280×960 Pixel Count Set Back 70 Shading Comp. Choose [On] to correct peripheral illumination according to the type of lens. • Compensation is not available for teleconverters or extension tubes. • Noise may be visible at the edges of photographs taken at high ISO sensitivities. — WB Set the white balance. This is the same as the live control setting. You can also fi ne-tune the white balance for each mode. You can also make fi ne adjustments using white balance compensation on the super control panel (P. 24). 56 All > [All Set]: Use the same white balance compensation in all modes except [CWB]. [All Reset]: Set white balance compensation for all modes except [CWB] to 0. — W Keep Warm Color Select [Off] to eliminate “warm” colors from pictures taken under incandescent lighting. — #+WB Adjust white balance for use with a fl ash. — Color Space You can select how colors are reproduced on the monitor or printer. — MENU c X

7 Y Record/Erase Option Description g Quick Erase If [On] is selected, pressing the  button in the playback display will immediately delete the current image. — RAW+JPEG Erase Choose the action performed when a photograph recorded at a setting of RAW+JPEG is erased in single-frame playback (P. 33). [JPEG]: Only the JPEG copy is erased. [RAW]: Only the RAW copy is erased. [RAW+JPEG]: Both copies are erased. • Both the RAW and JPEG copies are deleted when selected images are deleted or when [All Erase] (P. 76) is selected. 70 File Name [Auto]: Even when a new card is inserted, the fi le numbers are retained from the previous card. File numbering continues from the last number used or from the highest number available on the card. [Reset]: When you insert a new card, the folder numbers starts at 100 and the fi le name starts at 0001. If a card containing images is inserted, the fi le numbers start at the number following the highest fi le number on the card. — Edit Filename Choose how image fi les are named by editing the portion of the fi lename highlighted below in gray. sRGB: Pmdd0000.jpg Pmdd AdobeRGB: _mdd0000.jpg mdd — Priority Set Choose the default selection ([Yes] or [No]) for confi rmation dialogs. — dpi Settings Choose the print resolution. — Copyright Settings* Add the names of the photographer and copyright holder to new photographs. Names can be up to 63 characters long. [Copyright Info.]: Select [On] to include the names of the photographer and copyright holder in the Exif data for new photographs. [Artist Name]: Enter the name of the photographer. [Copyright Name]: Enter the name of the copyright holder. 1) Highlight a character 1 and press Q to add the highlighted character to the name 2. 2) Repeat Step 1 to complete the name, then highlight [END] and press Q. • To delete a character, press the INFO button to place the cursor in the name area 2, highlight the character, and press . ! ” # $ % & ( ) * + , - . / 0 1 2 3 4 5 6 7 ’ 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ ] _ a b c d e f g h i j k l m n END o p q r s t u v w x y z { } ABCDE 05/70 Delete Copyright Name Cancel Set 2 1 — * OLYMPUS does not accept liability for damages arising from disputes involving the use of [Copyright Settings]. Use at your own risk. MENU c Y

7 Z Movie Option Description g nMode Choose a movie record mode. This option can also be selected using the live control. 69 Movie R Choose [Off] to record silent movies. This option can also be selected using the live control. 74 Movie Effect Choose [On] to enable movie effects in n mode. 42 Wind Noise Reduction Reduce wind noise during recording. — Recording Volume Adjust microphone sensitivity. [Built-In R]: Set the camera’s internal microphone. [External R]: Set when using the SEMA-1 (sold separately). [Line-In R]: Set a microphone connected to the microphone jack. — �b Built-In EVF Option Description g Built-in EVF Style Choose the viewfi nder display style. — V Info Settings Like the monitor, the viewfi nder can be used to display histograms and highlights and shadows. — V Displayed Grid Display a framing grid in the viewfi nder. Choose from [w], [x], [y], [X], and [x]. — EVF Auto Switch If [Off] is selected, the viewfi nder will not turn on when you put your eye to the viewfi nder. Use the u button to choose the display. — EVF Adjust Adjust viewfi nder brightness and hue. Brightness is automatically adjusted when [EVF Auto Luminance] is set to [On]. — V Half Way Level If set to [Off], the level gauge will not be displayed when the shutter button is pressed halfway down. This is effective when [Built-in EVF Style] is set to [Style 1] or [Style 2]. — MENU c Z MENU c b

7 k K Utility Option Description g Pixel Mapping The pixel mapping feature allows the camera to check and adjust the image pickup device and image processing functions. 141 Exposure Shift Adjust optimal exposure separately for each metering mode. • This reduces the number of exposure compensation options available in the selected direction. • The effects are not visible in the monitor. To make normal adjustments to the exposure, perform exposure compensation (P. 49). — AF Focus Adj. You can minutely adjust the AF phase contrast focus point in ±20 steps. 107 : Warning Level Choose the battery level at which the 8 warning is displayed. 16 �: Battery Priority Choose the primary power source when using a power battery holder. 129 Level Adjust You can calibrate the angle of the level gauge. [Reset]: Resets adjusted values to the default settings. [Adjust]: Sets the current camera orientation as the 0 position. — Touch Screen Settings Activate the touch screen. Choose [Off] to disable the touch screen. — Eye-Fi* Enable or disable upload when using an Eye-Fi card. Displayed when an Eye-Fi card is inserted. — * Use in accordance with local regulations. Onboard airplanes and in other locations in which the use of wireless devices is prohibited, remove the Eye-Fi card from the camera, or select [Off] for [Eye-Fi]. The camera does not support the “endless” Eye-Fi mode. AEL/AFL MENU c R [AEL/AFL] Autofocus and metering can be performed by pressing the button to which AEL/AFL has been assigned. Choose a mode for each focus mode. AEL/S-AF AEL AEL AFL mode1 S-AF AEL/AFL Exposure Fully Half Way Back Set AEL/AFL Mode Shutter button function Button function Half-press Full press When holding down AEL/AFL Focus Exposure Focus Exposure Focus Exposure S-AF mode1 S-AF Locked – – – Locked mode2 S-AF – – Locked – Locked mode3 – Locked – – S-AF – C-AF mode1 C-AF start Locked Locked – – Locked mode2 C-AF start – Locked Locked – Locked mode3 – Locked Locked – C-AF start – mode4 – – Locked Locked C-AF start – MF mode1 – Locked – – – Locked mode2 – – – Locked – Locked mode3 – Locked – – S-AF – MENU c k

7 MF Assist MENU c R [MF Assist] This is a focus assist function for MF. When the focus ring is rotated, the edge of the subject is enhanced or a portion of the screen display is magnifi ed. When you stop operating the focus ring, the screen returns to the original display. Magnify Magnifi es a portion of the screen. The portion to be magnifi ed can be set in advance using AF target. g [AF Area] (P.52) Peaking Displays clearly defi ned outlines with edge enhancement. You can select the enhancement color. g [Peaking Settings] (P.93) $ Notes • [Magnify] and [Peaking] can be displayed using button operations. The display is switched every time the button is pressed. Assign the switching function to one of the buttons in advance using [Button Function] (P. 99). # Cautions • When Peaking is in use, the edges of small subjects tend to be enhanced more strongly. This is no guarantee of accurate focusing. Button Function MENU c S [Button Function] See the table below for the functions that can be assigned. The options available vary from button to button. Button function items [UFunction] / [VFunction] / [RFunction]*1 / [tFunction] / [YFunction] / [ZFunction] / [IFunction] / [GFunction] / [nFunction] / ([Direct Function]*2 / [P]*3) / [mFunction] / [nFunction] / [lFunction]*4 *1 Not available in n mode. *2 Assign the function to each of FGHI. *3 Choose the AF target. *4 Choose the function assigned to the button on some lenses. F Adjust exposure compensation. ISO Adjust ISO sensitivity. WB Adjust white balance. AEL/AFL AE lock or AF lock. The function changes according to the [AEL/AFL] setting. When AEL is selected, press the button once to lock the exposure and display u on the monitor. Press the button again to cancel the lock. R REC Press the button to record a movie.

7 z (Preview) Aperture is stopped down to the selected value while the button is pressed. k (One-touch white balance) The camera measures white balance when the button is pressed (P. 57). P (AF area) Choose the AF target. P Home Pressing the button selects the AF target position saved with [P Set Home] (P. 90). The home AF target position is indicated by a p icon. Press the button again to return to AF target mode. If the camera is turned off when the home position is selected, the home position will be reset. MF Press the button to select manual focus mode. Press the button again to restore the previously selected AF mode. RAWK Press the button to toggle between JPEG and RAW+JPEG record modes. Test Picture Pictures taken while the button is pressed are displayed in the monitor but are not recorded to the memory card. Myset1 – Myset4 Switches among the registered Myset settings when the button is pressed. Press the button again to return. I/H The button can be used to choose between I and H while the underwater case is attached. Press and hold the button to return to the previous mode. If this option is selected, the FL-LM2 will fi re even when not raised. When using an ED12-50mmEZ lens with power zoom (E-ZOOM), the lens is automatically zoomed to the WIDE end or TELE end in accordance with I and H switching. Live Guide Press the button to display live guides. b (Digital Tele- converter) Press the button to turn digital zoom on or off. a (Magnify) Press the button to display the zoom frame. Press again to magnify the image. Press and hold the button to turn off the zoom frame. Peaking Each press of the button switches the monitor between display/non-display. When Peaking is displayed, histogram and highlight/shadow display are not available. AF Stop Stop autofocus. j/Y Choose a sequential shooting or self timer option. # Choose a fl ash mode. HDR Switch to HDR with the saved settings. BKT Turns on BKT shooting using stored settings. Multi Function Press the button to recall the selected multi function*. When switching recalled functions, press the button while turning the dial. G (Touch panel lock) Each time the button is pressed, touch panel operation switches between enabled and disabled. Electric Zoom When using a lens with a power zoom function, after pressing the button, use the arrow pad for zooming operations. * Multi function: b (Highlight&Shadow Control), c (Color Creator), a (Magnify), d (Image Aspect)