One for All URC-6131 Operation & User’s Manual

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features And Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Installing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Programming Device Control . . . . . . . . . . . . . . . . . . . . . . . . 9 Programming DVD Player/VCR Combo Control. . . . . . . . 10 Searching For Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Programming Master Power . . . . . . . . . . . . . . . . . . . . . . . . 12 Programming The Power Key For Master Power. . . . . . . . . . . . 12 Operating Master Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Clearing Master Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Using Keymover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Programming Keymover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Restoring Keymoved Keys To Default Settings. . . . . . . . . . . . . 14 Restoring A Single Keymoved Key. . . . . . . . . . . . . . . . . . . . . . 14 Restoring All Keymoved Keys In A Single Mode . . . . . . . . . . . . . 15 Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . . . . . . . . 15 Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Locking Volume Control To One Mode (Global Volume Lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Unlocking Volume Control For A Single Device (Individual Volume Unlock) . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Unlocking All Volume Control (Restoring Default Setting ). . . . . . . . . . . . . . . . . . . . . . . . . . 17 Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Setup Codes for Audio Receivers . . . . . . . . . . . . . . . . . . . . . . 17 Setup Codes for Cable Boxes (Converters) . . . . . . . . . . . . . . . 18 Setup Codes for CD Players . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Setup Codes for DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . 20 Setup Codes for DVD Player/VCR Combos. . . . . . . . . . . . . . . . 21 Setup Codes for PVRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Setup Codes for PVR/Satellite Receiver Combos. . . . . . . . . . . 22 Setup Codes for Satellite Receivers . . . . . . . . . . . . . . . . . . . . 22 Setup Codes for TVs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Setup Codes for TV/DVD Player Combos. . . . . . . . . . . . . . . . . 27 Setup Codes for TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . 27 Setup Codes for VCRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 About Upgrading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Upgrade Exclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Instructions To The User . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Additional Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 2 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 2

Control (URC-6131) is designed to remotely operate up to six home entertainment devices and features intuitive and easy-to use buttons to operate PVR (Personal Video Recorders) and DVD components.Its sophisticated technology will allow you to consolidate all of your original home entertainment remote controls into one easy-to-use product.Advanced features include: • Intuitive buttons to allow easy access to your PVR or DVR (Digital Video Recorder) functions and menus • Direct code setup for easy device programming • Step and Set code setup and Code Verification for an alternate way to program devices • Master Power function for master on/off control of all of your equipment with a single keystroke • Volume Lock to lock volume controls to one mode or individual modes • Device Key Re-Assignment to remotely control a second (duplicate) device • Color-coded keys to quickly locate popular functions • Code library for popular video and audio devices The URC-6131 remote control requires two (2) new AA alkaline batteries (not included) and some easy programming to control your devices.For best results, please read and perform all instructions listed here. Also,keep these instructions for future reference. 3 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 3

Use the illustration below to locate features on the One For All 6-Device PVR Universal Remote Control (URC-6131) and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming,see the Device Table on page 7. IMPK6VR manual 1.0 2/21/03 5:46 PM Page 4

remote control is working and (after programming) is sending signals. Press TV,PVR,DVD,CBL/SAT,AUD, or VCR once to select a desired home entertainment device to control.Also see the Device Table on page 7. Press POWER once to turn on or off the selected device.For master power control,see Programming Master Power on page 12. Press MENU once to display your selected device’s main menu.For PVRs,use PVR Menu. Use INFO to display the current channel and program information. Use GUIDE to display your selected device’s program guide or setup menu. Use EXIT to exit from your selected device’s guide or menu. Use the cursor keys to move the cursor in the program guide and menu screens. Use SELECTto choose options from your selected device’s menu or guide. In the AUD mode,use SELECT to set the surround sound.Use L (or M) to adjust the volume higher (or lower).Use (or ) to adjust the balance left (or right). Use VOL+ (or VOL-) to raise (or lower) the sound volume. Use CH+ (or CH-) to select the next higher (or lower) channel. Press Mute once to turn the sound off or on. Use to command your PVR to instantly replay the last 7 seconds of a program you are viewing. continued on next page... L L IMPK6VR manual 1.0 2/21/03 5:46 PM Page 5

Key Charts (continued) Press Prev. once to recall the last- viewed channel and to page back one screen on the main menu. In the AUD mode,use Prev. to select the receiver band. Use or to perform the Thumbs Down or Thumbs Up feature on your Tivo/PVR device. Press PVR Menu once to turn the PVR’s main menu on or off. Use to command your PVR to skip or advance through a recorded program scene or commercial. Use the transport keys to control your VCR,PVR,DVD player,or VOD (Video On Demand) if available on your cable or satellite service. Press REC twice to record a PVR or VCR program. Use Audio/CC to select an alternate audio channel (e.g.,Spanish) or closed captions,if available on your cable/satellite service or DVD. Press SUBT. once to turn subtitles on or off,if available. Use ANGLE/SLEEP to perform the angle function on your DVD player or to set the sleep timer on a selected device if equipped with this feature. Use for slow motion playback on a VCR,PVR,or DVD player equipped with this feature.Press PLAY to cancel slow motion. Use the keypad (1 ~ 9 and 0) to directly select channels (e.g.,009 or 031). In the AUD mode,use the keypad (1 ~ 9 and 0) to select audio sources 1 through 10. IMPK6VR manual 1.0 2/21/03 5:46 PM Page 6

the channel numbers on some TVs. Use TV/VID to switch the TV’s input to view TV or video programs. Use PIP to switch the Picture-In- Picture feature on or off (if available on your TV). Use Swap to switch images and sound between the main and window pictures. Use Move to move the window picture to different positions in the main picture. Use SET for all programming sequences. Device Table NOTE: Please refer to the table below when performing the instructions in “Programming Device Control”on page 9 or “Programming DVD Player/ VCR Combo Control”on page 10. After programming,the One For All 6-Device PVR Universal Remote Control will be able to control the following types of devices: NOTE:Audio Receiver/DVD Player Combos (i.e.,Home Theater In A Box) are listed in “Setup Codes For Audio Receivers”on pages 17 and 18. DEVICE KEY CONTROLS THESE TYPES OF DEVICES Televisions PVRs (Personal Video Recorders) Cable Boxes (Converters),Satellite Receivers, or Satellite/PVR Combos VCRs or TV/VCR Combos DVD Player,DVD Player/VCR Combos,or TV/DVD Player Combos Audio Receivers or CD Players IMPK6VR manual 1.0 2/21/03 5:46 PM Page 7

and lift off the battery cover. 2. Obtain two (2) new AA alkaline batteries. Match the + and – marks on the batteries to the + and – marks in the battery case, then insert the new batteries. 3. Press the battery cover back into place. The tab should click when the cover is locked. 4. Test the remote control by pressing any mode key (e.g.,TV).If the batteries are inserted correctly,the LED (red light) will blink once. NOTE:When batteries need replacement,the remote control will stop operating. Remove the old batteries and insert new ones within 10 minutes to ensure all of your programming information is restored. 8 ❶ ❸ ❷ ❷ IMPK6VR manual 1.0 2/21/03 5:46 PM Page 8

The One For All 6-Device PVR Universal Remote Control is preprogrammed at the factory to operate an RCA TV, VCR,and satellite receiver,a Philips Tivo PVR,a Toshiba DVD player,and a Pioneer audio receiver/amplifier.To control devices other than the default brands,perform the following steps;otherwise skip this section: NOTE: For DVD Player/VCR Combo control,see the next page. 1. Turn on a desired device (e.g.,VCR or DVD player) and,if applicable, insert media (e.g.,cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding.Highlight or write down the codes and device you wish to program before starting step 2. 2. On the remote control,press a device key once (i.e.,TV,PVR,DVD,CBL/SAT,AUD,or VCR). NOTE: To program control of a cable box or satellite receiver,press CBL/SAT once. NOTE: To program control of a CD player or audio receiver,press AUD once. NOTE:To program control of a TV/VCR Combo, press VCR once.After programming,you will be able to control channel selection,volume,and VCR functions. NOTE: To program control of a TV/DVD Player Combo,press DVD once.After programming, you will be able to control channel selection, volume,and DVD functions. 3. Press and hold SET until the LED (red light) blinks twice,then release SET. 4. Use the Manufacturer’s Codes (starting on page 17) to locate the type of device and brand name and then enter the first four- digit code for your device.If performed correctly,the LED will blink twice. NOTE:If the LED did not blink twice,repeat steps 2 through 4 and enter the same code again. 5. Aim the remote control at the device and press POWER once.The device should turn off.If it does not,repeat steps 2 through 5, trying each code for your brand until you find one that works.If it still doesn’t work, try Searching For Your Code on page 11. NOTE: If the device does not have a POWER key,press the (Play) key. continued on next page... 9 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 9

(continued) 6. Repeat steps 1 through 5 (on the previous page) for each device you want to control. For future reference,write down each working device code in the following boxes: TV Code: PVR Code: DVD Code: CBL/SAT Code: AUD Code: VCR Code: PROGRAMMING DVD PLAYER/VCR COMBO CONTROL 1. Turn on the DVD Player/VCR Combo and insert a DVD. NOTE: Please read steps 2 through 4 completely before proceeding.Highlight or write down the codes and device you wish to program before starting step 2. 2. On the remote control,press DVD.Next, press and hold SET until the LED (red light) blinks twice,then release SET. 3. Use the Setup Codes For DVD Player/VCR Combos (on page 21) to locate the brand name and then enter the first four-digit code for your device.If performed correctly,the LED will blink twice. NOTE:If the LED did not blink twice,repeat steps 2 through 4 and enter the same code again. 4. Aim the remote control at the device and press POWER once.It should turn off.If it does not,repeat steps 2 through 4,trying each code for your brand until you find one that works.If it still does not work,try Searching For Your Code on the next page. NOTE: If the device does not have a POWER key,press the (Play) key. 10 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 10

but it also has a separate VCR code,you’ll also need to program it into the remote control to access VCR controls as follows: a. Press VCR once.Then press and hold the SET key until the LED blinks twice. b. Enter the VCR code for your DVD Player/VCR Combo.If correct,the LED will blink twice. NOTE:If a separate VCR setup code is not listed, you can use the VCR key to program a separate VCR device or another device (see “Re-Assigning Device Keys”on page 15) 6. For future reference,write down the working DVD Player/VCR combo code in the below boxes: DVD/VCR Code: VCR Code: (if used) SEARCHING FOR YOUR CODE If your device does not respond to the remote control after trying all codes listed for your brand,or if your brand is not listed at all,try searching for your code. For example,to search for a code for your TV: 1. On the remote control,press TV once. 2. Press and hold SET until the LED (red light) blinks twice,then release SET. 3. Enter 9 - 9 - 1.The LED will blink twice. 4. Aim the remote control at the the TV and slowly alternate between pressing POWER and TV.Stop when the TV turns off. NOTE:In the search mode,the remote control will send IR codes from its library to the selected device,starting with the most popular code first. 5. To lock in the code,press and release SET. The LED will blink twice. 6. To search for the codes of your other devices,repeat steps 1 through 5,but substitute the appropriate device key for the device you are searching for. 11 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 11

If you have set up the remote control using the Searching For Your Code procedure (on the previous page),you may need to find out which four-digit code is operating your equipment. For example,to find out which code is operating your TV: 1. On the remote control,press TV once. 2. Press and hold SET until the LED (red light) blinks twice,then release SET. 3. Enter 9 - 9 - 0.The LED will blink twice. 4. To view the code for the first digit,press 1 once.Wait 3 seconds,count the LED blinks (e.g.,three blinks = 3) and write down the number in the leftmost box in the TV code boxes on page 10 NOTE: If a code digit is “0”,the LED will not blink. 5. Repeat step 4 three more times for remaining digits.Use 2 for the second digit,3 for the third digit,and 4 for the fourth digit. Write down the code digits in the remaining TV code boxes on page 10. 6. To check for codes of other devices,repeat steps 1 through 5,but substitute the appropriate device key for each device you are checking.Write down the device’s code digits in the appropriate code boxes on page 10. PROGRAMMING MASTER POWER In its default state,the POWER key on the URC-6131 remote control will individually power your home entertainment devices on or off.However,you can also program a Master Power function onto the POWER key that will sequentially turn on or off all the devices with a single key press. Programming The Power Key For Master Power 1. Press and hold SET until the LED (red light) blinks twice,then release SET. 12 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 12

Then press POWER once. 3. For the first device you want in the power on sequence,press its device key (e.g., CBL/SAT) once. 4. Repeat step 3 up to five more times to add desired devices to the power-on sequence. 5. To save the settings and exit the program, press and hold SET until the LED blinks twice,then release SET. Operating Master Power 1. After programming,point the remote control at the devices and press POWER for at least 2 seconds to sequentially turn on or off your devices. NOTE:When POWER is pressed for less than 2 seconds,a power command will only be sent to the currently-selected device.This allows you to still individually power devices on or off. 2. You will see the devices turn on or off according to your programmed sequence. NOTE:The currently-selected device will always turn on first,followed by the remaining programmed sequence.After the master power sequence has been completed,the remote control will be set to control the first powered-on device. NOTE: If one or more devices does not have a POWER key,the power off/on sequence may be slightly delayed when the remote control signals the device(s).This action is normal. Clearing Master Power 1. Press and hold SET until the LED (red light) blinks twice,then release SET. 2. Enter 9 - 9 - 5.The LED will blink twice. Then press POWER once. 3. Press and hold SET until the LED blinks twice,then release SET.Master Power is now cleared. 13 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 13

Control includes a Keymover feature that allows you to map (or copy) keys from one mode (i.e.,source mode) to another mode (i.e.,destination mode). NOTE: The following keys cannot be used as a source or destination: TV,PVR,DVD,CBL/SAT,AUD,VCR,and SET. Programming Keymover For example,if your VCR does not have volume control, you can map those keys (i.e.,VOL+,VOL-,and Mute) from the TV mode to the VCR mode as follows: 1. Press and hold SET until the LED (red light) blinks twice,then release SET. 2. Enter 9 - 9 - 4.The LED will blink twice. 3. For the source mode,press TV once. 4. For the source key,press VOL+ once. 5. For the destination mode,press VCR once. 6. For the destination key,press VOL+ once. 7. The LED will blink twice indicating the keymoved sequence is correct. 8. Repeat steps 1 through 7 twice more to map remaining volume control keys, substituting VOL- and Mute as source and destination keys in steps 4 and 6. Upon completion of the above procedure,you can now use your One For All 6-Device PVR Universal Remote Control to control the TV’s volume and mute in the VCR mode,as well as in the TV mode. Restoring Keymoved Keys to Default Settings Restoring A Single Keymoved Key 1. Press a device key that has a keymoved key. 2. Press and hold SET until the LED (red light) blinks twice,then release SET. 3. Enter 9 - 9 - 4.The LED will blink twice. 4. Press the destination key twice (where the keymoved key is stored).The LED will blink twice. 14 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 14

1. Press and hold SET until the LED (red light) blinks twice,then release SET. 2. Enter 9 - 9 - 4.The LED will blink twice. 3. Press the destination mode twice (where keymoved keys are stored).The LED will blink twice. RE-ASSIGNING DEVICE KEYS The One For All 6-Device PVR Universal Remote Control can be set to control a second TV,PVR,VCR,DVD player, or other device.For example,to control a TV,a cable box, and two VCRs,you will need to re-assign the unused DVD key to operate the second VCR as follows: 1. On the remote control,press and hold SET until the LED (red light) blinks twice,then release SET. 2. Enter 9 - 9 - 2.The LED will blink twice. 3. Press VCR once,then press DVD once.The LED will blink twice. 4. The DVD key is now ready to be programmed for your second VCR.See Programming Device Control on page 9. To re-assign other device keys to the DVD key,repeat steps 1 through 4 with a sequence from the below chart: NOTE: Only one device can be assigned to an unused device key at a time. To Re-Assign Device Perform Sequence DVD as 2nd TV key: SET - 9 - 9 - 2 - TV - DVD DVD as 2nd CBL/SAT key: SET - 9 - 9 - 2 - CBL/SAT - DVD DVD as 2nd PVR key: SET - 9 - 9 - 2 - PVR - DVD DVD as 2nd AUD key: SET - 9 - 9 - 2 - AUD - DVD You can also re-assign another unused device key by substituting it for the DVD key above and performing the sequence.For example,to re-assign an unused AUD key as a second VCR key,perform SET - 9 - 9 - 2 - VCR - AUD. When a re-assignment is done,the LED will blink twice to confirm your choice.At that time,you will need to program the remote control for the new device (see Programming Device Control on page 9). 15 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 15

The One For All 6-Device PVR Universal Remote Control is set at the factory for independent volume control of each selected device. However,you may change the Volume Lock setting to Global Volume Lock so that a device’s volume will be locked to one mode (e.g.,to control TV volume in all other modes).After that,if desired,you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation. Locking Volume Control To One Mode (Global Volume Lock) 1. Press and hold SET until the LED (red light) blinks twice,then release SET. 2. Enter 9 - 9 - 3 and then press any mode key once (e.g.,TV).The LED will blink twice. 3. Now,when you press VOL+, VOL-,or Mute, the volume of the selected device (e.g.,TV) will be controlled regardless of the mode you have selected. Unlocking Volume Control For A Single Device (Individual Volume Unlock) 1. After performing Global Volume Lock(see above),press a desired mode key where you want volume to be unlocked (e.g., AUD) and controlled within its own mode. 2. Press and and hold SET until the LED (red light) blinks twice,then release SET. 3. Enter 9 - 9 - 3 and then press VOL- once. The LED will blink four times. 4. If desired,repeat steps 1 through 3 (of this section) for each device that you want volume to be unlocked. 5. Now,after you select a device that has volume unlocked (e.g.,AUD),pressing VOL+, VOL-,or Mute,will control the device’s volume only in its own mode. 16 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 16

Default Setting) NOTE: Performing these instructions will restore independent volume control for all programmed devices (e.g.,TV volume control in TV mode,VCR volume in VCR mode,etc.). 1. On the remote control,press and hold SET until the LED (red light) blinks twice,then release SET. 2. Enter 9 - 9 - 3 and then press VOL+ once. The LED will blink four times. 3. Volume will again be independently controlled according to its default states for all programmed devices. MANUFACTURER’S CODES Setup Codes For Audio Receivers ADC 0531 Aiwa 1089,1405,0121,0158,0189,1388 Alco 1390 Anam 1609 Apex Digital 1257 Audiotronic 1189 Audiovox 1390 Bose 1229 Capetronic 0531 Carver 1089,1189,0189 Denon 1104,1360 Harman/Kardon 0110,0189 JBL 0110,1306 JVC 0074 KLH 1390 Kenwood 1313,1027,1570,1569,0027 Koss 1366 Linn 0189 MCS 0039 Magnavox 1089,1189,0189,0531 Marantz 1089,1189,0039,0189 Musicmagic 1089 Onkyo 0135,0842,1298 continued on next page... 17 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 17

Optimus 1023,0531,0670 Panasonic 1518,0039,0309 Philips 1089,1189,1269,0189 Pioneer 1023,0014,0150,0531,0630,1384 Polk Audio 0189 Proscan 1254 Quasar 0039 RCA 1023,1254,0531,1390,1609 Samsung 1295 Sansui 1089,0189 Sherwood 1653 Sony 1058,1258,1158,0158,1558,1658,1758 Soundesign 0670 Stereophonics 1023 Sunfire 1313 Technics 1308,1309,1518,0039,0309 Thorens 1189 Venturer 1390 Victor 0074 Wards 0014,0158,0189 Yamaha 0176,1176 Setup Codes For Cable Boxes (Converters) ABC 0003,0008,0014,0017 Americast 0899 Bell & Howell 0014 Bell South 0899 Director 0476 General Instrument 0476,0003,0276,0810 GoldStar 0144 Hamlin 0009,0273 Jerrold 0476,0003,0276,0014,0810 Memorex 0000 Motorola 0476,0276,0810 Pace 0237 Panasonic 0000,0107 Paragon 0000 Philips 0305,0317 Pioneer 0877,0144,0533,1877 Pulsar 0000 Quasar 0000 Regal 0273,0279 Runco 0000 Samsung 0144 18 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 18

Aiwa 0157 Burmester 0420 California Audio Labs 0029,0303 Carver 0157,0179,0437 Classic 1297 DKK 0000 DMX Electronics 0157 Denon 0873,0003 Fisher 0174,0179 GPX 1296 Garrard 0393,0420 Genexxa 0032 Harman/Kardon 0157,0173 Hitachi 0032 JVC 0072,1294 Kenwood 0681,0826,0626,0028,0037,0190 Koss 1317 Krell 0157 Linn 0157 MCS 0029 MTC 0420 Magnavox 0157 Marantz 0626,0029,0157,0180 Miro 0000 Mission 0157 NSM 0157 Nikko 0174 Onkyo 0868,0101 Optimus 1063,0000,0032,0037,0145,0179,0420,0437 Panasonic 0029,0303 Parasound 0420 Philips 0626,0157 Pioneer 1063,1062,0032 Polk Audio 0157 Proton 0157 QED 0157 Quasar 0029 continued on next page... 19 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 19

RCA 1062,0032,0053,0179 Realistic 0179,0180,0420 Rotel 0157,0420 SAE 0157 Sansui 0157 Sanyo 0179 Sharp 0861,0037,0180 Sherwood 1067,0180 Sonic Frontiers 0157 Sony 0490,0000,0100,0185 Soundesign 0145 TDK 1208 Tascam 0420 Teac 0174,0180,0393,0420 Technics 0029,0303 Victor 0072 Wards 0157,0053 Yamaha 0888,0036,0187,1292 Yorx 0461 Setup Codes For DVD Players Aiwa 0641 Apex Digital 0672,0717,0755,0794,0796,0797,0830,1100 Audiologic 0736 B & K 0655,0662 Blue Parade 0571 Broksonic 0695 DVD2000 0521 Daewoo 0784 Denon 0490,0634 Emerson 0591 Enterprise 0591 Fisher 0670 GE 0522,0717,0815 GPX 0699,0769 Go Video 0715,0783 Gradiente 0651 Greenhill 0717 Harman/Kardon 0582,0702 Hitachi 0573,0664 Hiteker 0672 JBL 0702 JVC 0558,0623,0867 KLH 0717 20 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 20

Go Video 0715 Hitachi 0664 (for VCR use 0000) JVC 0867 continued on next page... 21 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 21

(continued) Samsung 0820 Sansui 0695 Sharp 0630 (for VCR use 0848) Sylvania 0675 (for VCR use 0000) Toshiba 0503 Setup Codes For PVRs Keen 0693 Panasonic 0616 Philips 0618 ReplayTV 0614,0616 Sonic Blue 0614,0616 Sony 0636 Tivo 0618,0636 Setup Codes For PVR/Satellite Receiver Combos Echostar 0775,1005,1170 Expressvu 0775 Hughes 1142 Hyundai 1011 Philips 1142 Proscan 0392 RCA 0392,1107 Sony 0639 Setup Codes For Satellite Receivers AlphaStar 0772 Chaparral 0216 Crossdigital 1109 DishPro 1005,0775 Echostar 1005,0775,1170 Expressvu 0775 GE 0566 GOI 0775 General Instrument 0869 HTS 0775 Hitachi 0819 Hughes Network Systems 1142,0749,1749 Hyundai 1011 JVC 0775 Magnavox 0724,0722 22 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 22

A-Mark 0003 AOC 0030,0019,0003,0185 Abex 0032 Admiral 0093,0463 Advent 0761 Adventura 0046 Aiko 0092 Aiwa 0701 Akai 0030 Alaron 0179 Ambassador 0177 America Action 0180 Anam 0180 Apex Digital 0748,0765,0767 Archer 0003 Audiovox 0451,0180,0003,0092,0623 Baysonic 0180 Belcor 0019 Bell & Howell 0154,0016 Bradford 0180 Brockwood 0019 Broksonic 0236,0463,0003 CXC 0180 Candle 0030,0056,0046,0186 Carnivale 0030 Carver 0054 Celebrity 0000 continued on next page... 23 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 23

Changhong 0765 Cineral 0451,0092 Citizen 0060,0030,0056,0039,0046,0092,0186,0280 Clairtone 0185 Concerto 0056 Contec 0180,0157,0185 Craig 0180 Crosley 0054 Crown 0180,0039 Curtis Mathes 0047,0054,0154,0451,0093,0060,0030,0145, 0056,0016,0039,0166,0702,0747,1147,1347 Daewoo 0451,0019,0039,0092,0623 Daytron 0019 Denon 0145 Dumont 0017,0019 Dwin 0774 Electroband 0000,0185 Electrohome 0381 Emerson 0154,0236,0463,0180,0282,0178,0019,0179, 0039,0038,0177,0185,0280,0623 Envision 0030 Fisher 0154 Fujitsu 0179,0683 Funai 0180,0179,0171 Futuretech 0180 GE 0047,0051,0451,0282,0178,0021,0027,0747, 1147,1347 Gibralter 0017,0030,0019 GoldStar 0030,0178,0019,0001,0032 Gradiente 0053,0056 Grunpy 0180,0179 Haier 0768 Hallmark 0178 Harley Davidson 0179 Harman/Kardon 0054 Harvard 0180 Havermy 0093 Hitachi 0145,0056,0016,0032,0038,0151 Infinity 0054 Inteq 0017 JBL 0054 JCB 0000 JVC 0053 Janeil 0046 KEC 0180 24 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 24

25 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 25

RCA 0047,0019,0018,0038,0090,0679,0747,1047, 1147,1247,1347,1447,1547 RadioShack 0047,0154,0165,0180,0030,0178,0019,0056, 0039,0032,0747 Realistic 0154,0165,0180,0030,0178,0019,0056,0039, 0032 Rhapsody 0185 Runco 0017,0030,0497,0603 SSS 0180,0019 Sampo 0030,0039,0032 Samsung 0060,0030,0178,0019,0056,0032,0702,0766 Samsux 0039 Sansei 0451 Sansui 0463 Sanyo 0154 Scimitsu 0019 Scotch 0178 Scott 0236,0180,0178,0019,0179 Sears 0047,0054,0154,0156,0178,0179,0056,0171, 0747 Semivox 0180 Semp 0156 Sharp 0093,0165,0039,0157,0386,0688,0689 Shogun 0019 Signature 0016 Simpson 0186,0187 Sony 0000,0080,0111,1100 Soundesign 0180,0178,0179,0186 Spectricon 0003 Squareview 0171 Starlite 0180 Supre-Macy 0046 Supreme 0000 Sylvania 0054,0030,0171,0381 Symphonic 0180,0171 TMK 0178,0056,0177 TNCi 0017 Tandy 0093 Tatung 0003 Technics 0250,0051 Technol Ace 0179 Techwood 0051,0056,0003 Teknika 0054,0180,0150,0060,0019,0179,0056,0016, 0039,0092,0186 Telefunken 0056,0702 26 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 26

Broksonic 0695 Konka 0719,0720 Panasonic 1362,1462 Philips 0854 RCA 1022 Sharp 0630 Sylvania 0821 Toshiba 0695 Setup Codes For TV/VCR Combos Broksonic 0002,1479 Citizen 0278,1278 Colt 0072 Curtis Mathes 1035 Daewoo 1278 Emerson 0002,1278,1479 Funai 0000 GE 1035,0240,0807,1060 GoldStar 1237 Harley Davidson 0000 Hitachi 0000 Lloyd’s 0000 Magnasonic 0278,1278 Magnavox 0000,1781 Magnin 0240 Memorex 0037,0454,1037,1162,1237,1262 continued on next page... 27 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 27

MGA 0240 Mitsubishi 0807 Optimus 0454,1162,1262 Orion 0002,1479 Panasonic 1035,1162,1262 Penney 0240,1035,1237 Quasar 1035,1162 RadioShack 1037 RCA 0807,0240,1035,1060 Sansui 0000,1479 Sanyo 0240 Sears 0000,1237 Sharp 0807 Sony 0000,1232 Sylvania 1781 Symphonic 0000 Thomas 0000 Toshiba 0845 White Westinghouse 1278 Zenith 0000,1479 Setup Codes For VCRs Admiral 0048,0209 Adventura 0000 Aiko 0278 Aiwa 0037,0000 Akai 0041 America Action 0278 American High 0035 Asha 0240 Audiovox 0037,0278 Beaumark 0240 Bell & Howell 0104 Broksonic 184,0121,0209,0002,0479,1479 CCE 0072,0278 Calix 0037 Canon 0035 Carver 0081 Cineral 0278 Citizen 0037,0278,1278 Colt 0072 Craig 0037,0047,0240,0072 Curtis Mathes 0060,0035,0162,0041,0760,1035 Cybernex 0240 28 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 28

JVC 0067,0041 Jensen 0041 KEC 0037,0278 KLH 0072 Keen 0693 Kenwood 0067,0041,0038 Kodak 0035,0037 LXI 0037 Lloyd’s 0000 Logik 0072 MEI 0035 MGA 0240,0043 MGN Technology 0240 MTC 0240,0000 Magnasonic 1278 Magnavox 0035,0039,0081,0000,0563,1781 Magnin 0240 Marantz 0035,0081 Marta 0037 Matsushita 0035,0162,0454 Memorex 0035,0162,0037,0048,0039,0047,0240,0000, 0104,0209,0454,0479,1037,1162,1237,1262 Minolta 0042 Mitsubishi 0067,0043,0807 Motorola 0035,0048 continued on next page... 29 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 29

Multitech 0000,0072 NEC 0104,0067,0041,0038 Nikko 0037 Noblex 0240 Olympus 0035 Optimus 1062,0162,0037,0048,0104,0432,0454,1048, 1162,1262 Orion 0184,0209,0002,0479,1479 Panasonic 1062,0035,0162,0225,0454,0616,1035,1162, 1262 Penney 0035,0037,0240,0042,0038,1035,1237 Pentax 0042 Philco 0035,0209,0479 Philips 0035,0081,0618,0749,1081,1181 Pilot 0037 Pioneer 0067 Polk Audio 0081 Profitronic 0240 Proscan 0060,0760,1060 Protec 0072 Pulsar 0039 Quasar 0035,0162,0454,1035,1162 RCA 0060,0240,0042,0760,0807,1035,1060 RadioShack 0000,1037 Radix 0037 Randex 0037 Realistic 0035,0037,0048,0047,0000,0104 ReplayTV 0614,0616 Runco 0039 STS 0042 Samsung 0240,0045 Sanky 0048,0039 Sansui 0000,0067,0209,0041,0479,1479 Sanyo 0047,0240,0104 Scott 0184,0045,0121,0043 Sears 0035,0037,0047,0000,0042,0104,1237 Semp 0045 Sharp 0048,0807,0848 Shintom 0072 Shogun 0240 Singer 0072 Sonic Blue 0614,0616 Sony 0035,0032,0000,0033,0636,1032,1232 Sylvania 0035,0081,0000,0043,1781 Symphonic 0000 30 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 30

press a key. SOLUTION: Replace batteries with two new AA alkaline batteries. PROBLEM: LED blinks when you press a key,but home entertainment device does not respond. SOLUTION: Make sure the remote control is aimed at your home entertainment device and is not farther than 15 feet away. PROBLEM: The unit does not control home enter- tainment devices or commands are not working properly. SOLUTION: Try all listed codes for the device brands being set up.Make sure they can be operated with an infrared remote control. continued on next page... 31 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 31

properly. SOLUTION: Use the VCR codes for your brand.Some combo units may require both a DVD code and a VCR code for full operation. PROBLEM: Changing channels does not work properly. SOLUTION: If the original remote control required pressing ENTER to change channels, then press ENTER on the remote control after entering the channel number. PROBLEM: Tried Search For Your Code method and still could not find a working code. SOLUTION: Clear the device key as follows: Press and hold SET until the LED (red light) blinks twice,then release.Next enter 9 - 9 - 2. Then press the device key to be cleared twice.Now repeat the Search For Your Code method on page 11. PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo. SOLUTION: For power on,these products require programming TV codes.For Sony, use TV code 0000 and VCR code 0032.For Sharp,use TV code 0093 and VCR code 0048. PROBLEM: CH+ and CH- do not work for your RCA TV. SOLUTION: Due to RCA design (1983-1987),only the original remote control will operate these functions. PROBLEM: No remote control of volume. SOLUTION: See Changing Volume Lock on page 16 to lock/unlock volume. 32 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 32

Control has the largest infrared code library available. However,if you purchase a brand new home entertain- ment device,it may not respond to the codes stored in the remote control’s memory. If this happens,please contact our Customer Support department (see Customer Support on the next page) to upgrade the remote control.The Customer Support representative will search our entire database for a code that matches your device and instruct you how to enter it into your One For All 6-Device PVR Universal Remote Control. If the code for your home entertainment or home automation device is not in our database,we will need to “capture” the code for that device from its original remote control. A new code would then be created and need to be entered into your One For All 6-Device PVR Universal Remote Control.If necessary,the Customer Support representative can instruct you how to begin the capture procedure. NOTE:One For All reserves the right to replace a returned remote control with a new one of equal or superior functionality. Upgrade Exclusions • Home entertainment devices controlled by radio frequency (RF/UHF),wired,or ultrasonic remote controls.Only devices controlled by infrared remote controls are covered. • Home entertainment devices not controlled by remote controls. • Broken or defective product. • Products that operate over 100 kHz. • Infrared keyboards and infrared pointing devices (such as mouse substitutes). • All products for sale and/or use outside the continental United States,Hawaii,Alaska,or Canada. 33 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 33

following ways: • E-mail: [email protected] • Internet: http://www.oneforall.com • Consumer Help Line: (330) 405-8615 INSTRUCTIONS TO THE USER This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide a reasonable protection against harmful inter- ference in a residential installation.This equipment generates,uses,and can radiated radio frequency energy and if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet or a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help 34 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 34

only,that this product will be free from defects in materials and workmanship,under normal use,for ninety (90) days from the date of original purchase. This warranty does not cover damage or failures caused by products or services not supplied by OFA, or which result from accident,misuse,abuse,neglect, mishandling,misapplication,faulty installation, set-up adjustment,improper maintenance,alteration, maladjustment of consumer controls,modifications, commercial use,or that is attributable to acts of God. There are no express warranties except as listed above. OFA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES,INCLUDING THE WAR- RANTIES OF MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE,ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages,or limitations on how long an implied warranty lasts,so the above exclusions or limitations may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. To obtain warranty service for a defective product during the warranty period,please return the product, preferably in the original carton,along with your purchase receipt,to the store of original purchase. A note detailing the complaint would be helpful.The store,at its option,will replace or repair this product if found to be defective. One For All: (330) 405-8655 URC-6131 Feb.2003 35 IMPK6VR manual 1.0 2/21/03 5:46 PM Page 35

For All® has a universal remote control that will fit your needs.Look for these exciting products at a retailer near you. One For All Access 3 . . . . . . . . . . . . . . . . . . . . . URC-3605 One For All Big Easy 3-Device. . . . . . . . . . . . . URC-3300 One For All Video Expert 4-Device. . . . . . . . . URC-4041 One For All Big Easy 4-Device. . . . . . . . . . . . . URC-4330 One For All Access 4 . . . . . . . . . . . . . . . . . . . . . URC-4605 One For All Access 5 . . . . . . . . . . . . . . . . . . . . . URC-5705 One For All PVR 6-Device . . . . . . . . . . . . . . . . URC-6131 One For All 6-Device Home Theater. . . . . . . . URC-6011 One For All 8-Device Home Theater. . . . . . . . URC-8011 One For All 8L-Device Home Theater With Learning. . . . . . . . . . . . . . . . . . . . . . . . . . URC-8811 One For All A/V LCD 8 Device With Learning. . . . . . . . . . . . . . . . . . . . . . . . . . URC-8910 One For All IR/RF LCD 8 Device With Learning. . . . . . . . . . . . . . . . . . . . . . . . . . URC-9910 One For All 8 Device Home Theater Remote Powered By Kameleon . . . . . . . . . . . . . . . . . . . URC-9960 ONE FOR ALL® is the registered trademark of Universal Electronics Inc.Computime International Ltd.is the Licensee of the ONE FOR ALL® brand for USA and Canada. Copyright 2003 by Universal Electronics Inc.No part of this publication may be reproduced,transmitted, transcribed,stored in any retrieval system,or translated to any language,in any form or by any means,electronic, mechanical,magnetic,optical,manual,or otherwise, without the prior written permission of Universal Electronics Inc. The One For All® 6-Device PVR Universal Remote Control is compatible for use in North America, excluding Mexico. IMPK6VR manual 1.0 2/21/03 5:46 PM Page 36