Phonic P5A Operation & User’s Manual

Download Phonic P5A PDF Manual (20 pages)

Text of the manual

Manual del Usuario

使用手册 English / Español / 简体中文 P5A/6A/8A PROFESSIONAL STUDIO MONITOR MONITOR DE ESTUDIO PROFESIONAL 专业录音室监听音箱 P8A

PROFESSIONAL STUDIO MONITOR

MONITOR DE ESTUDIO PROFESIONAL 专业录音室监听音箱 INTRODUCTION......................................4 DRIVERS..........................................4 CROSSOVER...................................4 AMPLIFIER.......................................4 FEATURES...............................................5 INSTALLATION........................................5 SETING THE INPUT SENSITIVITY...5 SETTING TONE CONTROL.............5 LOW MATCH .................6 ROOM COMPENSATION..6 HIGH MATCH..................6 POWER MODE ..............6 INPUT CONNECTORS.....6 MOUNTING THE MONITOR....................7 VERTICAL/HORIZONTAL MOUNTING..7 CONSOLE TOP MOUNTING ..........7 OVERLOAD INDICATOR.........................7 SPECIFICATIONS....................................8 CONTENTS INTRODUCCIÓN...............................................10 DRIVERS..................................................10 CROSSOVER............................................10 AMPLIFICADOR........................................10 CARACTERÍSTICAS........................................11 INSTALACIÓN..................................................11 SETEO DE SENSIBILIDAD DE ENTRADA.11 SETEO DE CONTROL DE TONO.............11 BAJO MATCH....................................12 COMPENSACIÓN DE CUARTO..12 ALTO MATCH....................................12 MODO DE ENERGÍA........................12 CONECTORES DE ENTRADA..........12 MONTANDO EL MONITOR..............................13 MONTAJE VERTICAL / HORIZONTAL.........13 MONTAJE SUPERIOR DE CONSOLA...13 INDICADOR DE SOBRECARGA.....................13 ESPECIFICACIONES.......................................14 CONTENIDO 目录简介..............................16 单体.........................16 分频器......................16 功率放大器................16 特色..............................16 准备工作........................17 设定输入灵敏度..........17 设定音调控制.............17 低频匹配.............17 室内补偿.............17 高频匹配.............17 电源模式..............17 输入连接.............17 安装监听喇叭..................18 垂直/水平放置..........18 混音控制台安装.........18 过载指示器....................18 规格.............................19 Phonic preserves the right to improve or alter any information within this document without prior notice Phonic se reserva el derecho de mejorar o alterar cualquier información provista dentro de este documento sin previo aviso PHONIC保留不预先通知便可改变或更新本文件权利 V1.0 11/14/2008

1. Read these instructions before operating this

apparatus. 2. Keep these instructions for future reference. 3. Heed all warnings to ensure safe operation. 4. Follow all instructions provided in this document. 5. Do not use this apparatus near water or in locations where condensation may occur. 6. Clean only with dry cloth. Do not use aerosol or liquid cleaners. Unplug this apparatus before cleaning. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including . 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip- over. 13. Unplug this apparatus during lighting storms or when unused for long periods of time. 14. Refer all servicing to service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is in- tended to alert the user to the presence of important operat- ing and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: To reduce the risk of or electric shock, do not expose this apparatus to rain or moisture. CAUTION: Use of controls or adjustments or performance of procedures other than those may result in hazardous radiation exposure. The apparatus shall not be exposed to dripping or splashing and that no objects with liquids, such as vases, shall be placed on the apparatus. The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. Warning: the user shall not place this apparatus in the area during the operation so that the mains switch can be easily accessible. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN

P5A / P6A / P8A

INTRODUCTION The bi-amplified P5A/6A/8A are two-way active monitoring speakers designed for high output, low coloration and broad bandwidth. P5A is 5” 2-way; P6A is 61/4” 2-way, P8A is 83/4” 2-way. Bigger number means bigger power as well as bigger woofer, which offers extended low frequency response and higher output level. Due to its compact size, integrated construction, excellent dispersion and precise stereo imaging, ��- ing, mobile vans, broadcast, TV control rooms and home studios. Designed as an active speaker, this unit contains �� and protection circuitry. The directivity control system used provides excellent frequency balance even in �� SOFT DOME WITH SOUND GUIDING HORN This horn is designed to provide better sound direc- tivity for the listener(s). With its smooth surface and well-spread angle, the sound produced from the tweeter can be easily forwarded to the listener(s). DRIVERS The bass frequency is reproduced by a 5-inch, 61/4”- inch, and 83/4” -inch woofer respectively. P5A, P6A, and P8A all use a 25mm (1 inch) soft dome tweeter, with pure piston behavior up to 20KHz. The uniform dispersion control is achieved with the directivity con- trol system. This has also resulted in perfect phase and delay uniformity at thecrossover frequency. Both drivers in PSeries Active Version are magnetically shielded. Please feel free to place this unit next to your PC, laptop, or any other electronic devices. CROSSOVER The active crossover network consists of two par- �� complementary and the slopes are 24dB/ octave. The crossover frequency is set to 1.8KHz. By use of active crossover controls (Low Match, Room Com- pensation, and High Match, which will be introduced on page 6), this speaker may be exactly matched to any application. AMPLIFIERS �� speaker with damping material, to ensure rattle free operation and long term reliability. The unit incorpo- rates special protection circuitry as well, for driver �� protection. Variable input sensitivity allows for accu- rate level matching to the mixing console.

P5A / P6A / P8A

FEATURES P5A 5” 2-way active studio monitor P6A 61/4” 2-way active studio monitor P8A 83/4” 2-way active studio monitor � � Unique linear phase and frequency response � � Soft dome with sound guiding horn � � Superb sonic accuracy � � �� Active crossover with 4th order Linkwitz-Riley �� Bi-color power on & overload protection indica- tor �� frequency output ��HIGH MATCH control for compensating HF (tweet- er) output with +2, 0, -2, or -4dB selection � � Variable ROOM COMPENSATION with +/- 6dB range for location matching �� with subwoofer �� - nance �� INSTALLATION Each active studio monitor is supplied with an inte- �� manual. Once unpacked, place the loudspeaker in its required listening axis. Before connecting up, ensure that the mains switch is off. Audio input is made via �� are in paralell. But unbalanced leads may be used �� linking Ring to sleeve of the 1/4” TRS phone jack. Once connection has been made, the speakers are ready to be powered-up. Before turning the unit on, make sure the mains needed is identical with the AC outlet. SETTING THE INPUT SENSITIVITY Adjustment of the input sensitivity of each speaker can be made to match that of the mixing console or other source, by using the input sensitivity control on the rear panel. The manufacturer default setting for this control is -6dBu (fully clockwise). SETTING TONE CONTROL The acoustic response of the system may also have to be adjusted to match the acoustic environment. The adjustment is done by setting the tone control �� anechoic response. Set switch to the desired position to select response curve needed.

P5A / P6A / P8A

1. LOW MATCH �� switch tells you the crossover frequency points. While use this unit with a subwoofer, you can select a suit- able frequency to match the additional subwoofer. 2. ROOM COMPENSANTION User can alter the output volume of woofer depending on its setup position. Positioned real close against the wall, this unit will have stronger low frequency. It is necessary then, to set the level of the low frequency output at -2dB to achieve the best balance between high and low frequency. When located at the corner, it is suggested to set this level at -4dB. Basically, the longer distance your monitor is to the wall, the more you need to boost this bass gain. 3. HIGH MATCH Use this to adapt the speaker’ s frequency response to the damping characteristics of the control room. 4. POWER MODE You can use this switch to select between “ON”, “AUTO ON” , and “OFF” . When set to OFF, this unit is compelety switched off and cannot be activated by the power switch. When the switch is set to AUTO ON, this unit will automatically operate as soon as a signal is sent to its input. On the other hand, this unit will automatically deactivate when the signal is �� is set to ON, this unit is activated all the time and can be turned off only by the power switch. 5. INPUT CONNECTORS �� for users to connect various ouput devices to the P Series Studio Monitors. 5

P5A / P6A / P8A

MOUNTING THE MONITOR VERTICAL / HORIZONTAL MOUNTING The speakers are normally delivered for vertical ��- dio monitor requires shorter distance than traditional monitors from its location to your ears, which means the reverberation time and general acoustics of the listening room are less critical. Hard surfaces will, �� to avoid putting this monitor close to side walls. The control surface of your mixing console may also pose �� using the meter bridge or rear panel to block sound from both drivers reaching the control surface. Make sure that there is nothing between your ears and the speakers. If your console has no meter bridge, try positioning the monitor higher or further behind the desk. Active series is designed to be used in both the upright and horizontal position. If you want to place two Active series horizontally, it is recommended you put the HF drivers on the outer edge. The low fre- quencies of this unit will generally sound better if the cabinet is against a wall. If possible, provide a rigid surface (eg.shelf) that is separate from the mixing console and other equipment. The speakers should roughly form a 60 degree angle at the listening posi- tion, and should be angled towards the listener(s). CONSOLE TOP MOUNTING If the active studio monitor series are used for console top mounting, it is recommended not to mount the speakers directly on the console; instead, position the speaker slightly behind the console by using �� coloring the sound. OVERLOAD INDICATOR The speaker is provided with one bi-colored indica- tor on the bottom right corner of the horn. When lit in green, it indicates that the speaker is ready for use. The indicator lighting up in red means that the �� is activated. In either cases, reduce the signal level so that the red LED stops blinking. If the red indica- �� cool down and check that the ventilation at the rear side of the speaker is not blocked. There should be a clearance of more than 4 inches (10cm) between speaker rear and any solid surface.

P5A / P6A / P8A

SPECIFICATIONS P5A P6A P8A �� HIGH (Program) 140W / 70W 170W / 70W 212W / 106W Control Input Trim, High Match, Room Compensation, Low Match, Power On/Auto On/Off Connection �� Indicator Bi-color On/Peak Crossover 1.8dB Hz, 24dB/oct Linkwitz-Riliey Filter Protection Circuit Clip Limiter, Power On muting, Thermal and Overload Protection Dimensions (H x W x D) 11.6" x 7.7” x 9.1” (294.6 x 195.6 x 231mm) 13.8" x 8.7” x9.3” (337.3 x 221.0 x 236.2mm) 16.9" x 10.6” x9.1” (249.3 x 269.2 x 231.1mm) Net Weight 12.9 lbs(5.6 kg) 18.0 lbs(8.2 kg) 22.0lbs(10kg) ��

P5A / P6A / P8A

Phonic P5A Operation & User’s Manual

Text of the manual

Manual del Usuario

PROFESSIONAL STUDIO MONITOR

1. Read these instructions before operating this

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

14. 所有检查与维修都必须交给合格的维修人员。本机的任何损伤都须要检修，例如: 电源线或插

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

CÓMO COMPRAR EQUIPO ADICIONAL

Other Monitor Manuals

Phonic P5A Operation & User’s Manual

Text of the manual

Manual del Usuario

PROFESSIONAL STUDIO MONITOR

1. Read these instructions before operating this

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

14. 所有检查与维修都必须交给合格的维修人员。本机的任何损伤都须要检修，例如: 电源线或插

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

P5A / P6A / P8A

CÓMO COMPRAR EQUIPO ADICIONAL

Other Monitor Manuals

Samsung S22F35 series

Philips 170C5

Siemens SIMATIC HMI series

ViewSonic VA2448-LED