Pico Macom PRR-1 Specifications

Text of the manual

6260 Sequence Drive San Diego, CA 92121

Ph: 858-546-5050 Toll Free: 800-421-6511 Fax: 858-546-5051 www.picomacom.com Fiber Optic Series PICO MACOM Rev. 10/07 T he Pico Macom PRR series optical return receivers are densely populated receiver units that take an optical input from a return transmitter and convert it to a 5~200MHz RF signal. Designed to meet CATV applications, each PRR Series receiver has a wide (-2dBm to 0dBm) optical input range that enables it to maintain a high-output RF level with negligible distortion. These optical receivers utilize a new low noise, impedance matched, high efficiency 1310/1550nm broadband photodiode and advanced RF amplification circuitry to facilitate carriage of critical downstream video, data, telephony and Internet traffic in an HFC broadband environment. PRR Series Optical Return Receivers •� Available in 1, 2 and 4-receiver configurations. • �� Optical power monitoring. •�� 5~200MHz return bandwidth for CATV return path. • �� High 45dBmV RF output at an optical wavelength of 1310/1550nm provides excellent C/N ratio. • � -20dB RF system test point to monitor the RF output of the receiver. • �� Low power consumption. • �� Wide optical window of -2dBm to 0dBm for improved system performance. Features

Fiber Optic Series

6260 Sequence Drive San Diego, CA 92121 Ph: 858-546-5050 Toll Free: 800-421-6511 Fax: 858-546-5051 Rev. 10/07 www.picomacom.com 2 * Test results are typical and were performed at our San Diego test center. Optical Wavelength: 1290nm/1600nm Optical Input Range: -2dBm to 0dBm Optical Connector Type: SC/APC(FC/APC Optional) RF Frequency Range: 5~200MHz RF Output Level: 45dBmV RF Output Impedance: 75Ω In-Band Flatness: ±1dB Output Return Loss: ≥15dB Carrier-to-Noise Ratio (CNR)*: ≥50dB Composite Second Order (CSO)*: ≥60dB Composite Triple Beat (CTB)*: ≤65dB Power Consumption (typical): 30 watts Operating Temperature: 0~50°C Storage Temperature: -20~+65°C Relative Humidity: <10% Dimensions: 19˝W x 13˝D x 1RU Weight: 7.15 lbs PRR-1 7.50 lbs PRR-2 8.15 lbs PRR-4 Specifications 90-264 VAC 47-63 Hz RF RF RF RF ON/OFF 2 OPTICAL IN 1 OPTICAL IN RECEIVER 1 RF ADJUST ON LINE OPTICAL RECEIVER 2 RF ADJUST ON LINE OPTICAL RECEIVER 3 RF ADJUST ON LINE OPTICAL RECEIVER 4 RF ADJUST ON LINE OPTICAL POWER OPTICAL RETURN PATH RECEIVER 90-264 VAC 47-63 Hz RF RF RF RF ON/OFF 2 OPTICAL IN 1 OPTICAL IN RECEIVER 1 RF ADJUST ON LINE OPTICAL RECEIVER 2 RF ADJUST ON LINE OPTICAL RECEIVER 3 RF ADJUST ON LINE OPTICAL RECEIVER 4 RF ADJUST ON LINE OPTICAL POWER OPTICAL RETURN PATH RECEIVER Rear View of PRR-2 Front View PRR-1 Single Optical Return Receiver PRR-2 Dual Optical Return Receiver PRR-4 Quad Optical Return Receiver Ordering Information

Other Receiver Manuals