Planar Q2 Quick Reference Manual

1 Right-click the desktop and select Properties > Settings. 2 Set the resolution to 1600 x 1200. 3 Click the Advanced button and select the Monitor tab. 4 Set the refresh rate to 60Hz. 5 Click OK until you return to the desktop. AX1-Q2-QRUG-2.qxd 3/1/05 5:12 PM Page 9 ...

7 The onscreen display (OSD) menu is the user interface for controlling video on the Dome Q2 display.With it you can adjust functions such as brightness, OSD horizontal and vertical position, and language and transparency.This display is originally manufactured as a dual-mode display able to operate in either analog or digital mode.Thus, some front-panel controls may not be relevant to the configuration of the display as a digital unit. Legend 1 Controls Locked/Unlocked Press the Menu and Right buttons simultane- ously for 3 seconds to lock or unlock the current con ...

1195 NW Compton Drive Beaverton, OR 97006-1992 USA phone + 1 (503) 748-1100 fax + 1 (503) 748-1493 Medical Sales Planar Systems, Inc. 400 Fifth Avenue Waltham, MA 02451-8738 USA phone + 1 (781) 895-1155 fax + 1 (781) 895-1133 Europe & Asia-Pacific Sales European Representative Planar Systems, Inc. Olarinluoma 9, P. O. Box 46 FIN-02201 Espoo, Finland phone + 358 9 420 01 fax + 358 9 420 0200 Customer Support • Visit www.planar.com • E-mail [email protected] • Call (866) PLANAR1 Copyright © 2005 Planar Systems, Inc. Planar and Dome are registered ...

Check that your system meets these requirements and runs one of these Microsoft operating systems. System Requirements • Intel Pentium 4/Xeon; AMD Athlon 64/K7/XP or compatible • Motherboard with free PCI Express slot • 256 MB RAM • CD-ROM drive • Power supply, 300 watts or greater Operating System • Windows XP with Service Pack 1 (or higher) • Windows 2000 with Service Pack 1 (or higher) Warning Avertissement Avvertenza Advertencia Warnung Before disconnecting a peripheral or removing a component from the motherboard, wait 20 seconds after unplugging the power ...