Planet Audio PA100B Operation & User’s Manual

3.5 mm Aux-In Cable OD 26” X H 27 5” (OD 66mm X H 70mm) 3 7V 400mAh Li-polymer battery 3 3W 20Hz~20KHz DC 5V 400mA PA100B press: press: press: Short press: Parameter Package Contents Function Indication Drawing

Powering On -Slide the On/Oī switch to the "On" posŝƟon, the Blue LED wilůŇash. When the Green LED is on, the unit is in Bluetooth Pairing Mode. Powering Off -Slide the On/Oī switch to the "Oī" posiƟon, all the LED status lights will shut oī. Bluetooth Mode Pairing -The unit will automaƟcally go into “Pairing Mode” when it is turned on. - Go into your devices seƫngs menu and look for “Planet Audio ” -If prompted for a password enter: 0000 -AŌer the unit has paired, and connected it will connect automaƟcally when PA100B is turned on and the device is in range. -If no device is found aŌer 25 sec. the PA100B will automaƟcally enter pairing mode. Streaming Music - Press “ ” to start playing music - Press “+” to play the next track - Press “ -” to play previous track - Press and Hold either “+/-” for volume Aux-In Mode Plug in the supplied 3.5 mm cable into the PA100B. The other end is connected to the device. *Please note that only “Volume +/-” will funĐƟon on the unit. Track control does not funĐƟon when in Aux-In mode. Charging -Ʃach the USB cable to the PA100B, and plug in to any USB charger. If the unit is completely discharged, it take approximately 2.5 hours to fully charge the unit. LED Status Red LED: On- Charging/ Oī– Charging complete Green LED: On-BT Mode Blue LED: Flashing-Pairing Mode/ Slow Flash-Connected

planetaudiousa.com