Plus M-12S Operation & User’s Manual

Please read this User’s Manual carefully before use to take full advan- tage of the functions of this product. After you have finished reading the manual, please keep it for future reference. http://www.monomachines.com http://www.monomachines.com

There are three types of copyboards: the 2-page standard size type (model M-12S), the 2-page wide size type (M-12W) and the 4-page + screen type (M-125). In addition, depending on the product you have purchased, the printer and stand may be sold separately. The descriptions and diagrams in this manual refer to the model M-12S. * When functions or operations are specific to a certain model of copyboard, the model name is specified. Trademarks • Microsoft and Windows are registered trademarks or trademarks in the United States and other countries of the Microsoft Corporation. • Adobe and Adobe Acrobat Reader are trademarks of Adobe Systems Incorporated. • Velcro is a registered trademark of Velcro Industries. The trademarks of the various companies and the product trademarks, even when not written down, will be given due respect. Product names and company names appearing in this manual are registered trademarks or trademarks of the respective companies. (1) The contents of this manual may not be reprinted in part or whole without permission. (2) The contents of this manual are subject to change without notice. (3) Great care has been taken in the creation of this manual; however, should any questionable points, errors, or omissions be apparent, please contact us. (4) Notwithstanding Section (3), this company will not be responsible for any claims of loss or profit or other matters deemed to be the result of using this unit. (5) The use of a printer as the peripheral device of the PLUS Copyboard is taken to be a prerequisite; therefore, operation will not be guaranteed when the printer is used with a direct connection to a personal computer. (6) Manuals with incorrect collating or missing pages will be replaced. E-2 http://www.monomachines.com http://www.monomachines.com

Important Safety Information .........................................................................................................E-4 Package Contents...........................................................................................................................E-7 Main Functions ................................................................................................................................E-8 Names of the Parts..........................................................................................................................E-9 Front ............................................................................................................................................ E-9 Rear ............................................................................................................................................ E-10 Changing the Height of the Unit................................................................................................... E-11 Control Panel (models M-12S and M-12W) ................................................................................. E-12 Control Panel (model M-125) ....................................................................................................... E-13 Operation Steps.............................................................................................................................E-14 Connecting the Power ..................................................................................................................E-15 Setting the Time ............................................................................................................................E-16 Printing ...........................................................................................................................................E-18 Preparing the Printer .................................................................................................................... E-18 Basic Printing Operation ............................................................................................................. E-19 Selecting the printing density.................................................................................................. E-21 Making additional copies ....................................................................................................... E-21 Cancellation of the print operation in progress ....................................................................... E-21 Specifying the Page (model M-125)........................................................................................ E-22 Switching to the screen (model M-125) .................................................................................. E-22 Printing in the same ratio as the sheet surface (Model M-12W)............................................... E-23 Moving the sheet surface manually ........................................................................................ E-23 Using USB Memory .......................................................................................................................E-24 USB Memory Storage Procedure ................................................................................................ E-24 Saving Image Files on a Computer/Deleting Image Files .............................................................. E-27 Making the Function Settings ......................................................................................................E-29 Basic Setting Operations ............................................................................................................. E-29 Table of Function Numbers, Selected Modes and Lamp Statuses ............................................... E-30 Accompanying Software ...............................................................................................................E-31 Software Contents and Overview................................................................................................. E-31 Operating Environment ................................................................................................................ E-32 Dedicated software's setting items and factory defaults ............................................................... E-32 Meaning of Error Messages .........................................................................................................E-33 Troubleshooting .............................................................................................................................E-34 Specifications ................................................................................................................................E-36 Appendix ........................................................................................................................................E-37 Connections and Wiring Diagram ................................................................................................ E-37 Meaning of the Terms Used in this Manual • USB memory: refers to USB flash memory. • USB memory storage: means the saving of sheet surface data using MEMORY (i.e., the USB port) of the operation panel. (The Copyboard has 3 USB ports.) • Internal memory: indicates a temporary saving location of the image that has been read. • “copy”: Both “print” and “USB memory saving” mean to “copy.” • Page (model M-125): The number assigned to the sheet surface is called the “page”. • Screen (model M-125): The “S” page for projecting images of optical devices is called the “screen”. • “Sheet surface”: refer to the drawing portion. • “Scroll” or “move”: indicates feeding of the sheet. E-3 http://www.monomachines.com http://www.monomachines.com

product’s service life and prevent fires, electric shocks and injury. Read these safety precautions carefully and be sure to heed them. Handling the AC power adapter • Do not connect any AC adapter other than the dedi- cated one to the unit. Doing so could result in fire or other accidents. • Do not use with voltages other than the voltage indicated. Doing so could result in fire or electric shock. • Do not let the AC power adapter get wet. Doing so could result in fire or electric shock. • Do not subject the AC power adapter to shocks. Doing so could result in fire or electric shock. Important Safety Information WARNING The unit’s rear panel should never be opened by anyone other than a qualified serviceperson. Contact your store of purchase to request inter- nal inspection, adjustment, repair, and cleaning. CAUTION Continued use of the unit under abnormal conditions (when the unit is emitting smoke, unusual odors or sounds) could lead to fire or electric shocks. Turn off the unit’s power immediately, then unplug the AC power adapter from the power outlet. Check that no more smoke, etc., is being emit- ted, then contact a sales outlet for repairs. Repairing the unit yourself is dangerous. Never attempt to do so. WARNING This is a class A product. In a domestic envi- ronment this product may cause radio interfer- ence in which case the user may be required to take adequate measures. This symbol warns the user that uninsulated voltage within the unit may have sufficient mag- nitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit. This symbol alerts the user that important lit- erature concerning the operation and mainte- nance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems. WARNING This product is not for use in Computer Rooms. The description “Computer Rooms” refers to areas where an abundance of computer con- trol equipment (such as high output servers) is being used. It does NOT refer to environments such as offices or classrooms where there are simply PC’s being used. WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by PLUS Vision Corp. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equip- ment is operated in a commercial environment. This equipment generates, uses, and can radi- ate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equip- ment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. You are cautioned that changes or modifi- cations not expressly approved by the party responsible for compliance could void your authority to operate the equipment. DOC Compliance Notice This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. E-4 http://www.monomachines.com http://www.monomachines.com

Handling the AC power adapter’s cord and plug • Damaging the power cord could lead to fire or electric shock. • When installing, do not squeeze the power cord between the product and a wall, rack, etc. • Do not modify or damage the power cord. • Do not place heavy objects on the power cord or pull strongly on it. • Do not place the power cord near heating appliances or otherwise heat it. • When unplugging the power cord, always do so by pulling on the plug, not the cord. If the power cord should be damaged, ask your store of purchase to replace it. • If there is dust or metal objects on or near the power plug’s blades, unplug the power cord then wipe the blade area clean using a dry cloth. Continued use without cleaning the plug could lead to fire or electric shock. • Do not plug in or unplug the power cord with wet hands. Doing so could lead to electric shock. • When moving the unit, turn off the power and be sure to unplug the power cord from the AC outlet first. Moving the unit with the power cord plugged in could damage the cord, leading to fire or electric shock. • Connect the power plug securely to the AC outlet, press- ing the blades in to the hilt. Incomplete plugging could cause heating or attract dust, leading to fire. In addition, touching the plug’s blades could cause electric shock. Handling the included AC adapter box • An AC adapter box is provided with the copyboard for storing the AC power adapters of the copyboard and printer. The AC power adapters and the power cords generate heat. Place them sufficiently apart and do not bundle the cables together, or the adapters and cables could heat up, leading to fire. • Do not place vases, potted plants, glasses, cosmetics or containers of chemicals or water on the printer table. The liquid could spill and get into the AC adapter box, leading to fire or electric shock. Reflected Light from the Sheet Surface The sheet surface of the main unit has a white glaze and when a projector or other optical equipment is projected, the reflected light could result in eye fatigue or other symp- toms, so please be careful. For model M-125, an image can be projected on the copy- board when you switch to the screen panel. Also note that the light emitted from laser pointers can be linked to unexpected accidents, so please refrain from using them. Do not use the included CD-ROM in a player designed for audio CDs. • Never use the included CD-ROM in a player designed for audio CDs. Doing so could produce loud noises that could impair your hearing. These noises can also damage your speakers. Installation • Only a specially trained technician should install the set. Improper installation could lead to injury. • When mounting on a wall, be sure to check first that the wall surface is strong enough to support the total weight of the main unit, mount fittings and printer for a long period of time (including during earthquakes). If the wall is not strong enough, reinforce it before mounting the unit. • Getting water on or inside the unit etc., could lead to fire or electric shock. Be particularly careful when using the unit near a window when it is raining or snowing and when using it near the shore of the ocean and lakes. • Do not set the unit in hot places exposed to direct sun- light or in places exposed to an air conditioner or heating duct. Do not set the unit in places exposed to soot or humidity (near humidifiers, etc.). • When the power plug will be unplugged from the power outlet, please place the Copyboard near the power outlet so that it may be reached easily. Preventing Tipping (for stand type units) To prevent tipping, heed the instructions below. Tipping could lead to personal injury or damage the unit. • Use the unit on a flat floor. • Be sure to attach the supplied stabilizers to the stand, and lock the stoppers of the casters. Failing to do so could result in the unit tipping and could lead to personal injury. • Do not lean against the unit or apply excess force to the top of the unit. Cautions on Usage • Take care that the unit does not get wet and that water does not get inside. Do not place objects containing chemicals, water or other liquids (vases, potted plants, glasses, cosmetics, etc.) on top of the unit. The liquid could spill and get inside the unit, leading to fire or elec- tric shock. • When lifting the unit to adjust the height, etc., the unit should be lifted by at least two persons to prevent it from tipping and causing personal injury. • Do not move the sheet with paper or other objects attached to it. Doing so could cause damage. • Do not wipe the unit or sheet with thinner, benzene, alco- hol or other such products. Doing so could cause discol- oration or damage the sheet. • Only use markers designed exclusively for this product. Using other markers could damage the sheet. Also note that it may not be possible to erase the ink of other markers. • When moving the (stand type) unit, remove the stabilizers and release the caster locks. Hold the sides of the main unit and move it gently. Avoid shocks. • When not using for long periods of time, for safety be sure to unplug the AC power adapter from the power outlet. • Make entries within the effective reading size. (See page E-9) Portions that are drawn outside of this range might not be printed or copied when saving to USB memory or personal computer. E-5 http://www.monomachines.com http://www.monomachines.com