Polaroid DMC 1e Installation Manual

1 DMC Ie camera 2 Power supply and cord (may differ from illustration for some locations) 3 SCSI host adapter installation kit for PCs (optional; contact your dealer) 4 SCSI cable adapter (HD50 to DB25) 5 SCSI cable (2-meter) 6 Polaroid DMC Software CD containing • TWAIN driver and Polaroid DMC Ie software for Windows 95, 98 and NT • Adobe Photoshop plug-in and Polaroid DMC Ie software for Power MAC and PowerPC systems • Online user’s guide 7 Optional image-reporting software (available in some regions) Warning: Nothing inside the camera or power supply is user serviceable. Do not disassemble the camera. Doing so could result in severe electrical shock and damage to the camera. This action may also void your warranty. Contact Polaroid Technical Support or your dealer if the camera is malfunctioning. (To contact Polaroid from within the U.S.A., call 1-800-432-5355. Outside the U.S.A., see Obtaining Technical Assistance in the online user’s guide or visit www.polaroid.com on the World Wide Web.) 2 5 6 7 PM

. ws 95, 98 or NT r the DMC install pro- start. s not, select Run from dows Start menu. owse and select EXE on the CD-ROM. K. PM

a 0.5 c-mount adapter.) Refer e information about c- Connecting the camera to the microscope: 1 Screw the c-mount adapter into the camera. Note: Finger-tighten the adapter. Do not use tools. 2 Insert the c-mount adapter into the microscope. The camera indicator LEDs should face toward the front of the microscope. 0.25 in. (6.3mm) maximum Indicator LEDs PM

t have an adapter, you must puter is a PC-compatible with nnected to a hard drive or CD- ter is recommended. t adapter must have a unique address for the camera, r SCSI devices: Turn the camera power switch to off (0) and set the SCSI address switch to a value not used by any other device. Note: The address is preset to 4. Do not change it unless another device is using 4. Other addresses typically available are 2, 5 and 6. indows 95, 98 or NT Look at the SCSI address switch on each SCSI device connected to your system. If nec- essary, see the instruc- tions provided with the devices. Power switch? (off=0) SCSI address switch Do not use 7, 8 or 9? (not valid addresses) PM

SI devices. Use the shortest nd all other SCSI devices off any cables. Do not connect nector on your computer. mera or computer. Set termination: The last device in a SCSI chain must be terminated (or have termination on), while all other devices must be unterminated (or have termination off). If the camera is the only device connected to your SCSI host adapter or the last device in a SCSI chain, set the camera termination to on (1). Otherwise, set termination to off (0). Termination instructions for your other SCSI devices are provided with the devices. Note: Do not use an external, passive terminator to terminate the camera. If another device is at the end of the SCSI chain, that device must be terminated with an active terminator for proper camera operation. evice ted) DMC Ie camera termination on (1) Termination switch PM

EDs are on, indicating AC and camera driver and display the 1 2 Power switch (on=1) To AC power Green LED Yellow LED PM

n window. If necessary, adjust o focus the image on the microscope manual for oose the appropriate exposure, settings for the image being e Type box for the test. ure and save the image to disk. mage-processing application, sfactorily. Windows 95, 98 or NT • Select Programs from the Start menu. • Point to Polaroid Digital Microscope Camera and select Polaroid DMC Ie. PM

de: indows 95, 98 or NT Select DMC Help from the Help menu. Select Programs from the Start menu. Point to Polaroid Digital Microscope Camera and select User's Guide. 6 PM

ers have a SCSI adapter built mputers do not. urn the computer off and adapter manufacturer. (The installation. If your PC uses log in as an administrator provided as an option with the er from your computer dealer. computers.) reserved. poration, Cambridge, MA, U.S.A. All other ve owners. 6 PM