Premier Two-Rock Jet 22 Owner's Manual
Text of the manual
Thank you for your purchase of a
amplifier from Premier Builders
Guild.
As a discerning guitarist, you know the road to great tone begins with
great components.
Our Classic Design, carefully selected parts and hand-built approach
combine to make an extremely versatile instrument.
Please take the time to read this manual. We hope it will answ
Front Panel Functions
1. Input Jack- High impedance input to the amplifier. Plug in your instrument here.
2. Push/Pull Treble Control- Adjusts the high frequency response. In the full counter-clockwise
position, high frequencies are cut. In the full clockwise position, high frequencies are allowed to
pass to the gain stage. When the knob is in the “out
10. Stand-by Switch- Should be in the “down” or “stand-by” position when you apply power to the
unit. After a few seconds, place the switch in the “up” position to use the amplifier. You may leave
the unit “powered up” and place this switch in the “stand-by” position to mute the output.
11. Indicator Lamp- This lamp will illuminate when
All Fuses are 3AG Type 250 Volt, SLO-BLO
Export 100 Volt Domestic Fuses: Export 220, 230, 240 Fuses:
2A – 22/35 Watt 2A – 22/35 Watt 1A-22/35 Watt
2.5 - 50 Watt 2.5 - 50 Watt
