PROEL NEOS218PX Operation & User’s Manual

• 100 mm (4 in) Interleaved Sandwich Voice coil (ISV) • 4000 W program power handling • Double Silicon Spider (DSS) for superior excursion control and linearity • Double DemodulaƟ ng Rings (DDR) for lower distorƟ on • Improved heat dissipaƟ on via mulƟ -cell air diff ractor and mulƟ ple backplate vents • Weather protected cone and plates for outdoor usage • Plywood cabinets with die-cast handles, pole holder and four rugged 80mm wheels for an easy transport. INTRODUCTION NEOS PX series represents the highest expression of PROEL GROUP Research & Development applied in loudspeaker systems. A natural evoluƟ on of the NEOS Series, it incorporates the latest technologies developed by PROEL in advanced sound reinforcement systems able to provide premium sound, maximum performance and up-to-date features. The NEOS PX are designed for the use both as high-performance mobile systems for live applicaƟ ons and for advanced fi xed installaƟ ons. The NEOS PX are able to provide an excepƟ onal sound defi niƟ on together with very high dynamics and low distorƟ on in an ultra-compact package. TECHNICAL SPECIFICATION AcousƟ cal Frequency Response Diagram System type Sub-woofer, vented Low frequency driver 2 x 18’’ woofer - 4” VC Frequency response from 30 Hz Coverage omnidirecƟ onal Max SPL 137 dB Electrical Nominal Impedance 8 + 8 ohm Power Handling ConƟ nuous 2000 W Power Handling Peak 4000 W SensiƟ vity 101 dBspl @ 1W / 1m Suggested Crossover Frequency 80 Hz - 125 Hz Connectors IN - LINK: Speakon® (NL4MP) Mechanical ConstrucƟ on 15, 18 and 24 mm birch plywood Finish AnƟ -scratch black paint Pole holder 1 top - 1 side Dimensions (W x H x D) 590 x 990 x 790 mm Weight 80.5 kg (177.3 lbs) 10k 5k 2k 1k 500 200 100 50 20 20 20k Hz 110.0 dBSPL 100.0 90.0 80.0 70.0 60.0

PC240 2 in 4 out digital loudspeaker processor PC260 2 in 6 out digital loudspeaker processor KP210BK Sub-Speaker pole NL4FX Neutrik Speakon® PLUG see www.proel.com for detailed descripƟ on and other available accessories. SPARE PARTS NL4MP Neutrik Speakon® panel socket AC102 80 mm Caster 98NEOS18SW8 18’’ woofer - 4” VC

INPUT SINGLE SPEAKER SUB DUAL SPEAKER SUB 1+ / 1- INPUT 1+ / 1- INPUT 1ST WOOFER 2+ / 2- INTERNALLY N.C. 2+ / 2- INPUT 2ND WOOFER LINK - Power output for connecƟ ng the unit to another speaker. The INPUT and LINK connectors are in parallel to each other. PRODUCT LABEL - In this label are wriƩ en the most important data informaƟ on about the passive loudspeaker, model, impedance, maximum applicable conƟ nuous power, serial number. The NEOS218PX doesn’t contain a built-in crossover fi lter so the two loudspeaker are directly connected to the amplifi er outputs. For this reason, an external crossover is required in order to fi lter properly the sub-woofer and to combine it with top units. The crossover can be either analog or digital, however we recommend the PROEL ASO25 as analog processor or the PROEL PC240/260 as digital processor. In the following table PROEL suggest the PROCESSOR parameters for PC240/260; these parameters could be used to set also other equipment obtaining similar acousƟ c result. Filter High Pass Filter Low Pass Filter Parametric EQ Frequency 29 Hz from 80 to 125Hz 35 Hz Type BuƩ erworth 24 dB/oct. BuƩ erworth 18 dB/oct. Q = 0.7 / OCT. = 1.9 Gain - - +4 dB

in the materials or workmanship or if the product fails to funcƟ on properly during the applicable warranty period, the owner should inform about these defects the dealer or the distributor, providing receipt or invoice of date of purchase and defect detailed descripƟ on. This warranty does not extend to damage resulƟ ng from improper installaƟ on, misuse, neglect or abuse. Proel S.p.A. will verify damage on returned units, and when the unit has been properly used and warranty is sƟ ll valid, then the unit will be replaced or repaired. Proel S.p.A. is not responsible for any “direct damage” or “indirect damage” caused by product defecƟ veness. • This unit package has been submiƩ ed to ISTA 1A integrity tests. We suggest you control the unit condiƟ ons immediately aŌ er unpacking it. • If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspecƟ on. • Proel is not responsible for any damage that occurs during shipment. • Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer. • Possible damages to unit should be immediately noƟ fi ed to forwarder. Each complaint for package tampered with should be done within eight days from product receipt. SAFETY INSTRUCTIONS – To reduce the risk, close supervision is necessary when the product is used near children. – Protect the apparatus from atmospheric agents and keep it away from water, rain and high humidity places. – This product should be site away from heat sources such as radiators, lamps and any other device that generate heat. – This product should be located so that its locaƟ on or posiƟ on does not interfere with its proper venƟ laƟ on and heaƟ ng dissipaƟ on. – Care should be taken so that objects and liquids do not go inside the product. – The product should be connected to a power supply mains line only of the type described on the operaƟ ng instrucƟ ons or as marked on the product. Connect the apparatus to a power supply using only power cord included making always sure it is in good condiƟ ons. – WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable. – Do not cancel the safety feature assured by means of a polarized line plug (one blade wider than the other) or with a earth connecƟ on. – Make sure that power supply mains line has a proper earth connecƟ on. – Power supply cord should be unplugged from the outlet during strong thunderstorm or when leŌ unused for a long period of Ɵ me. CE CONFORMITY Proel products comply with direcƟ ve 2004/108/EC (EMC), as stated in EN 55103-1 and EN 55103-2 standards and with direcƟ ve 2006/95/CE (LVD), as stated in EN 60065 standard. PROEL S.p.A. (World Headquarter) - Via alla Ruenia 37/43 - 64027 Sant’Omero (Te) - ITALY Tel: +39 0861 81241 Fax: +39 0861 887862 www.proel.com