ProForm 985 Rt Operation & User’s Manual

tions in this manual before using this equipment. Keep this manual for future reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing parts, we will guarantee complete satisfaction through direct assistance from our factory. TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained technicians on our customer hot line will provide immediate assistance, free of charge to you. CUSTOMER HOT LINE: 1-800-999-3756 Mon.ÐFri., 6 a.m.Ð6 p.m. MST Model No. PFEX34390 Serial No. Patent Pending Visit our website at www.proform.com new products, prizes, fitness tips, and much more!

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 HOW TO OPERATE THE RECUMBENT CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

using the recumbent cycle. 2. It is the responsibility of the owner to ensure that all users of the recumbent cycle are ade- quately informed of all precautions. Use the recumbent cycle only as described in this manual. 3. Use the recumbent cycle indoors on a level surface. Keep the recumbent cycle away from moisture and dust. Place a mat under the recumbent cycle to protect the floor. 4. Inspect and tighten all parts regularly. Replace any worn parts immediately. 5. Keep children under the age of 12 and pets away from the recumbent cycle at all times. 6. Wear appropriate clothing when exercising; do not wear loose clothing that could become caught on the recumbent cycle. Always wear athletic shoes when using the recumbent cycle. 7. The recumbent cycle should not be used by persons weighing more than 250 pounds. 8. Always keep your back straight when using the recumbent cycle; do not arch your back. 9. If you feel pain or dizziness while exercising, stop immediately and cool down. 10. The pulse sensor is not a medical device. Various factors, including the user's move- ment, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general. 11. The recumbent cycle is intended for home use only. Do not use the recumbent cycle in a commercial, rental, or institutional setting. 12. The recumbent cycle does not have a free- wheel; the pedals will continue to move until the flywheel stops. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precau- tions before using the recumbent cycle.

985R recumbent cycle. Cycling is one of the most effective exercises for increasing cardiovascular fit- ness, building endurance, and toning the entire body. The PROFORM¨ 985R offers an impressive array of features to let you enjoy this healthful exercise in the convenience and privacy of your home. For your benefit, read this manual carefully before you use the PROFORM¨985R. If you have questions, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please mention the product model number and serial number when calling. The model number is PFEX34390. The serial number can be found on a decal attached to the recumbent cycle (see the front cover of this manual). Before reading further, please familiarize yourself with the parts that are labeled in the drawing below. Pulse Sensor Handlebar FRONT BACK Seat Backrest Side Shield Wheel Pedal Pedal Strap Console Book Holder Seat Handle LEFT SIDE BEFORE YOU BEGIN

ing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable wrench and Phillips screw- driver . Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached. Ground Screw (82)Ð1 M6 Nylon Locknut (15)Ð4 M6 x 38mm Button Bolt (14)Ð7 M10 Nylon Locknut (45)Ð2 M10 X 70mm Carriage Bolt (72)Ð2 M10 x 25mm Button Head Screw (74)Ð10 Console Screw (20)Ð4 M8 Washer (90)Ð7 M6 Washer (91)Ð3 M8 x 38mm Button Bolt (24)Ð4 M6 x 22mm Button Screw (29)Ð4 M8 x 100mm Button Bolt (63)Ð3 M10 Split Washer (17)Ð10

Frame (1) with two M10 x 70mm Carriage Bolts (72) and two M10 Nylon Locknuts (45). Make sure that the Front Stabilizer is turned so the Wheels (75) are not touching the floor. 2. Slide the Carriage Bar (7) onto the indicated tube on the Frame (1). Attach the Carriage Bar to the Frame with four M10 x 25mm Button Screws (74) and four M10 Split Washers (17). If the Seat Carriage (11) is not on the Carriage Bar (7), pivot the Seat Handle (79) to the position shown and slide the Seat Carriage onto the Carriage Bar. Move the Seat Carriage to the desired position and pivot the Seat Handle forward to secure the Seat. 3. Position the Rear Stabilizer (3) under the Carriage Bar (7) as shown. Attach the Rear Stabilizer to the Carriage Bar with three M8 x 100mm Button Bolts (63) and three M8 Washers (90). 2 11 79 3 7 63 63 90 17 7 17 17 17 74 74 1 90 3 2 75 1 72 45 1

the Seat Frame (27). Attach the Seat Frame and the Backrest Frame to the Seat Carriage (11) with four M8 x 38mm Button Bolts (24). 5. Slide a Seat Handle (61) onto one side of the Backrest Frame (8). Attach the Seat Handle with two M6 x 38mm Button Bolts (14) and two M6 Nylon Locknuts (15). Attach the other Seat Handle (not shown) to the other side of the Backrest Frame (8). 14 13 8 91 4 7 8 24 24 27 11 90 90 12 27 61 8 29 29 15 6 14 7. Attach the Backrest (13) to the Backrest Frame (8) with three M6 x 38mm Button Bolts (14) and three M6 Washers (91). 6. Attach the Seat (12) to the Seat Frame (27) with four M6 x 22mm Button Screws (29) and four M8 Washers (90). 5

the Upright (6), route the two Pulse Wires (22) into the Upright and out of the hole at the top of the Upright. Next, attach the Handlebar (16) to the Upright (6) with two M10 x 25mm Button Screws (74) and two M10 Split Washers (17). Make sure that the Pulse Wires (22) are not pinched between the Handle- bar and the Upright. 11. Attach the Console (9) to the Upright (6) with the four Console Screws (20). Make sure that no wires are pinched between the Console and the Upright. 10. Hold the Console (9) near the Upright (6) as shown. Identify the green console ground wire and attach it to the Upright with a Ground Screw (82). Make sure that the console ground wire connector is pointed toward the center of the indicated hole as shown. Next, connect the Extension Wire (18) and the two Pulse Wires (22) to the corresponding wires on the Console (9). Make sure that the wires are not tan- gled around each other. 8. While another person holds the Upright (6) in the position shown, connect the Extension Wire (18) to the Wire Harness (69). Next, carefully slide the Upright (6) onto the Frame (1). Be careful to avoid pinching the wires. Loosely thread four M10 x 25mm Button Screws (74) with M10 Split Washers (17) into the Upright and the Frame. Then, firmly tighten all four Button Screws.

For effective exer- cise, the seat should be in the proper position. As you pedal, there should be a slight bend in your knees when the pedals are in the farthest posi- tion. IMPOR- TANT: After you adjust the seat, make sure that your knees will not touch the handlebar or the console when you pedal. To adjust the seat, first pivot the seat handle to the position shown in the drawing. Next, slide the seat forward or back to the desired position. To secure the seat, pivot the seat handle forward. HOW TO ADJUST THE PEDAL STRAPS To adjust the pedal straps, first pull the straps off the tabs on the pedals. Adjust the straps to the desired positions and press the straps back onto the tabs. Seat Seat Handle Strap Tab HOW TO OPERATE THE RECUMBENT CYCLE 12. Identify the Left Pedal (40) (there is an ÒLÓ on the Left Pedal for identification). Using an adjustable wrench, tighten the Left Pedal counterclockwise into the left arm of the Crank (19). Tighten the Right Pedal (not shown) clockwise into the right arm of the Crank (19). Adjust the Left Pedal Strap (41) to the desired posi- tion and press the Pedal Strap onto the tab on the Left Pedal (40). Adjust the Right Pedal Strap (not shown) in the same way. 40 Tab 19 41 12 86 Jack 13 14. Make sure that all parts are properly tightened before you use the recumbent cycle. Note: After assembly is completed, some extra parts may be left over. Place a mat beneath the recumbent cycle to protect the floor. 13. Plug the Power Supply (86) into the jack at the rear of the recumbent cycle. Note: Your Power Supply may look different from the one pictured. IMPORTANT: When unplugging the Power Supply (86), always unplug the Power Supply from the recumbent cycle first and then from the wall outlet.

The innovative console offers a manual mode and three preset workout programs. When the manual mode is selected, the pedaling resistance can be changed with a touch of a button. When a preset pro- grams is selected, the console will automatically con- trol the pedaling resistance to give you an effective workout. The console also features seven monitor modes that provide instant exercise feedback: SpeedÑWhen a mode arrow points to this sym- bol, the console will show your pedaling speed, in miles per hour. TimeÑWhen a mode arrow points to this sym- bol, the console will show the elapsed time. DistanceÑWhen a mode arrow points to this symbol, the console will show the distance you have pedaled, in miles. Fat CalorieÑWhen a mode arrow points to this symbol, the console will show the approximate number of fat calories you have burned (see FAT BURNING on page 13). CalorieÑWhen a mode arrow points to this sym- bol, the console will show the approximate num- ber of calories you have burned. ScanÑWhen a mode arrow points to this sym- bol, the console will show the speed, time, dis- tance, fat calorie, and calorie modes, for 5 sec- onds each, in a continuous cycle. PulseÑThe pulse window will show your heart rate when the pulse monitor is used. HOW TO USE THE MANUAL MODE Plug in the power supply. Plug the power supply into the recumbent cycle (see assembly step 13 on page 9). Next, plug the power supply into an electrical outlet. Note: When you plug in the power supply, press the on/reset button, or activate the console by turning the pedals, the resistance motor will automatically calibrate itself. During calibra- tion, you will hear the resistance motor turn- ing. Wait until calibration is complete before continuing. Turn on the power. Press the on/reset button or simply begin pedal- ing to turn on the power. The entire display will appear for a moment; the console will then be ready for use. Note: If the power supply was just plugged in, the power will already be on. Select the manual mode. When the power is turned on, the manu- al mode will be selected and the manual indicator will light. If a preset pro- gram has been selected, press the select button repeat- edly until the manual indicator lights. 3 2 1 Resistance Buttons Mode Button On/Reset Button Select Button Program Profiles Mode Arrow Manual Indicator

As you exercise, adjust the pedaling resistance by press- ing the resistance but- tons. The indicators on the left side of the console will show which resistance level is selected. When the lowest indicator is dimly lit, resistance level 1 is selected; when the lowest indicator is brightly lit, resistance level 2 is selected; when the second indicator is dimly lit, resistance level 3 is selected; when the second indicator is brightly lit, resistance level 4 is selected; and so forth. When the highest indicator is brightly lit, resis- tance level 10, the most difficult level, is selected. Follow your progress with the monitor modes. The scan modeÑTo select the scan mode, repeatedly press the mode button until an arrow appears under the scan symbol. When the scan mode is selected, the con- sole will display the speed, time, distance, fat calorie, and calorie modes, for 5 seconds each, in a continuous cycle. A second arrow will show which mode is currently displayed. The speed, time, dis- tance, fat calorie, or calorie modeÑTo select a single mode for continuous display, repeatedly press the mode button until an arrow appears by the desired symbol. Make sure that there is not an arrow under the scan symbol. The pulse modeÑTo use the pulse mode, see step 6. To reset the modes, press the on/reset button. Measure your heart rate, if desired. Note: If the metal contacts on the top and bottom of the pulse sensor are covered with clear vinyl strips, peel off the strips before using the pulse sensor. To measure your heart rate, place your hands on the metal contacts on the pulse sensor. Your palms must be resting on the upper contacts and your fin- gers must be touching the lower contacts. Avoid moving your hands. When your pulse is detected, the heart- shaped indicator in the pulse display will flash each time your heart beats. A moment later, your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. If your heart rate is not shown, make sure that your hands are positioned as described above. Be careful not to move your hands excessively or to squeeze the metal contacts too tightly. When you are finished exercising, turn off the power. To turn off the power, simply wait for five minutes. If the pedals are not turned and the console buttons are not pressed for five minutes, the power will turn off automatically. 7 6 5 4 Metal Contacts Resistance Indicators Mode Arrow Mode Arrow WARNING: The pulse sen- sor is not a medical device. Various fac- tors, including the userÕs movement, may affect the accuracy of heart rate read- ings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.

regularly. To clean the recumbent cycle, use a soft, damp cloth. To prevent damage to the console, keep liquids away from the console and keep the console out of direct sunlight. PULSE SENSOR TROUBLE-SHOOTING ¥ Avoid moving your hands while using the pulse sen- sor. Excessive movement may interfere with heart rate readings. ¥ Do not hold the metal contacts too tightly; doing so may interfere with heart rate readings. ¥ For the most accurate heart rate reading, hold the metal contacts for about 15 seconds. ¥ For optimal performance of the pulse sensor, keep the metal contacts clean. The contacts can be cleaned with a soft clothÑnever use alcohol, abrasives, or chemicals. MAINTENANCE AND TROUBLE-SHOOTING HOW TO USE A PRESET WORKOUT PROGRAM Plug in the power supply. See step 1 on page 10. Turn on the power. See step 2 on page 10. Select one of the three preset programs. When the power is turned on, the man- ual mode will be selected and the manual indicator will light. To select a preset program, press the select but- ton repeatedly until the P1, P2, or P3 indicator lights. Note: When a preset program is selected, the resistance motor may calibrate itself and the displays may reset. Each preset program will last for approximately twenty minutes. The program profiles on the right side of the console show how the pedaling resis- tance will change during the programs. During program P2, for example, the profile shows that the pedaling resistance will gradually increase during the first ten minutes, and then gradually decrease during the last ten minutes. Begin your workout. As you exercise, the pedaling resistance will peri- odically change, as shown by the program pro- files on the console. The indicators on the left side of the console will show the current resis- tance level. Note: The resistance buttons will not operate while a preset program is in use. Follow your progress with the monitor modes. See step 5 on page 11. Measure your heart rate, if desired. See step 6 on page 11. When the preset program is completed, turn off the power. To turn off the power, simply wait for five minutes. If the pedals are not turned and the console buttons are not pressed for five minutes, the power will turn off automatically. 7 6 5 4 3 2 1 Indicator

exercise program. Remember that proper nutrition and adequate rest are essential for successful results. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity. The proper intensity level can be found by using your heart rate as a guide. The chart below shows recom- mended heart rates for fat burning, maximum fat burning, and cardiovascular (aerobic) exercise. To find the proper heart rate for you, first find your age on the bottom line of the chart (ages are rounded off to the nearest ten years). Next, find the three numbers above your age. The three numbers are your Òtraining zone.Ó The lowest number is the recommended heart rate for fat burning; the middle number is the recom- mended heart rate for maximum fat burning; the high- est number is the recommended heart rate for aerobic exercise. To measure your heart rate, first exercise for at least four minutes. Then, stop pedaling and measure your heart rate using the pulse sensor (see step 6 on page 11). Fat Burning To burn fat effectively, you must exercise at a relative- ly low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses easily accessible carbohydrate calories for ener- gy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest num- ber in your training zone as you exercise. For maxi- mum fat burning, adjust the intensity of your exercise until your heart rate is near the middle number in your training zone as you exercise. Aerobic Exercise If your goal is to strengthen your cardiovascular sys- tem, your exercise must be Òaerobic.Ó Aerobic exer- cise is activity that requires large amounts of oxygen for prolonged periods of time. This increases the demand on the heart to pump blood to the muscles, and on the lungs to oxygenate the blood. For aerobic exercise, adjust the intensity of your exercise until your heart rate is near the highest number in your training zone. WORKOUT GUIDELINES Each workout should include the following three parts: A warm-up, consisting of 5 to 10 minutes of stretching and light exercise.A proper warm-up increases your body temperature, heart rate, and circulation in prepa- ration for exercise. Training zone exercise, consisting of 20 to 30 min- utes of exercising with your heart rate in your training zone. (During the first few weeks of your exercise pro- gram, do not keep your heart rate in your training zone for longer than 20 minutes.) A cool-down, with 5 to 10 minutes of stretching. This will increase the flexibility of your muscles and will help to prevent post-exercise problems. EXERCISE FREQUENCY To maintain or improve your condition, plan three work- outs each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each week, if desired. Remember, the key to success is make exer- cise a regular and enjoyable part of your everyday life. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determin- ing heart rate trends in general.

5 1 Right Side Shield 6 1 Upright 7 1 Carriage Bar 8 1 Backrest Frame 9 1 Console 10 2 Handlebar Endcap 11 1 Seat Carriage 12 1 Seat 13 1 Backrest 14 7 M6 x 38mm Button Bolt 15 6 M6 Nylon Locknut 16 1 Handlebar 17 10 M10 Split Washer 18 1 Extension Wire 19 1 Pulley/Crank 20 4 Console Screw 21 13 M4 x 16mm Screw 22 1 M10 Washer 23 1 Frame Endcap 24 4 M8 x 38mm Button Bolt 25 8 M5 x 6mm Screw 26 2 Seat Carriage Bushing 27 1 Seat Frame 28 2 Bushing 29 4 M6 x 22mm Button Screw 30 1 Pivot Bushing 31 1 Magnet 32 1 Crank Bearing Assembly 33 1 Seat Brake 34 1 Frame Bushing 35 1 Console Back 36 2 Resistance Roller 37 1 Right Pedal 38 1 Right Pedal Strap 39 1 Crank Nut 40 1 Left Pedal 41 1 Left Pedal Strap 42 2 Front Stabilizer Endcap 43 1 Base Tube Endcap 44 1 Reed Switch/Wire 45 6 M10 Nylon Locknut 46 2 Bumper 47 2 Adjustment Bracket 48 2 Eye Bolt 49 1 Idler Arm Assembly 50 1 M10 x 26mm Bolt 51 1 ÒJÓ Bolt 52 2 M8 Nylon Locknut 53 2 M5 x 30mm Screw 54 1 Stop Bolt 55 1 M8 x 44mm Hex Bolt 56 2 M8 Nut 57 2 M10 Black Flat Washer 58 1 Return Spring 59 1 ÒCÓ Magnet 60 2 Seat Frame Endcap 61 2 Seat Handle 62 6 M4 x 38mm Screw 63 3 M8 x 100mm Button Bolt 64 2 Rear Stabilizer Endcap 65 1 Brake Block 66 1 Axle 67 1 Resistance Cable 68 1 Belt 69 1 Wire Harness/Resistance Motor 70 1 Flywheel 71 2 Pulse Handle /Pulse Wire 72 2 M10 x 70mm Carriage Bolt 73 1 Resistance Bracket 74 10 M10 x 25mm Button Screw 75 2 Wheel 76 6 Nut 77 2 M10 x 45mm Bolt 78 1 Spring Bracket 79 1 Seat Handle 80 2 #6 x 16mm Screw 81 1 M8 Split Washer 82 1 Ground Screw 83 2 Flywheel Bearing 84 1 Reed Switch Clamp 85 6 Console Back Screw 86 1 Power Supply 87 2 Handle Washer 88 2 Snap Ring 89 1 Set Screw 90 7 M8 Washer 91 3 M6 Washer # 1 UserÕs Manual # 3 Allen Wrench Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of this manual for information about ordering replacement parts. EXPLODED DRAWINGÑModel No. PFEX34390 R0100A Key No. Qty. Description Key No. Qty. Description Key No. Qty. Description

R0100A

Printed in Taiwan © 2000 ICON Health & Fitness, Inc. HOW TO ORDER REPLACEMENT PARTS To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give the following information when calling: ¥ The MODEL NUMBER of the product (PFEX34390) ¥ The NAME of the product (PROFORM¨ 985R recumbent cycle) ¥ The SERIAL NUMBER of the product (see the front cover of this manual) ¥ The KEY NUMBER and DESCRIPTION of the part(s) from page 14 of this manual. PROFORM¨ is a registered trademark of ICON Health & Fitness, Inc. LIMITED WARRANTY ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of pur- chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim- ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON authorized service center, products used for commercial or rental purposes, or products used as store display models. No other warranty beyond that specifically set forth above is authorized by ICON. ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con- nection with the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other con- sequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci- dental or consequential damages. Accordingly, the above limitation may not apply to you. The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state. ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813