Pyle PDMW410BP Instruction Manual

EXCELLENT PROFESSIONAL APPARATUS MICROPHONE WHICH WILL GIVE YOU OUTSTANDING RESULTS AT THE HIGH FIDELITY. THE MICROPHONE SUIT FOR SCHOOL SPEECH, MEETING SPEECH, TEACHERS AND PERFORMER ON THE STAGE. TO AVOID OF PROBLEM LIKE WIRELESS MICROPHONE. THE BODY PACK MICROPHONE CONNECTION IN EVERY WORKING CONDITION. INTRODUCTION 1 2 7 8 3 5 SENS 1 2 3 1. SOCKET 2. VOLUME CONTROL 3. POWER SWITCH 4. LED INDICATOR 5. BATTERY COVER 6. 7. 8. MIC SENSITIVITY SWITCHING LABEL BELT CLIP 9. CHANNEL SWITCH 4 6 FEATURE: SMALL POCKBODY TYPE LIKE A POCKET SIZE. IT IS VERY EASY CARRYING, ANTENNA BUILT-INSIDE. 9 1. BATTERY USE DC9V 2. DO NOT DROP THE MICROPHONE BODY ON THE FLOOR. 3. PROTECT THE UNITS AGAINST HUMIDITY AND HEAT. 4. IF THE UNITS ARE TO BE PUT OUT OF OPERATION DEFINITIVELY, BRING THEM TO TECHNICAL ENGINEER FOR DISPOSAL. 5. IF YOU WANT TO HAVE A DIFFERENT FREQUENCY, SET THE RECEIVER AND TRANSMITTER POWER SW TO OFF BEFORE YOU DO. CAUTION ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USE'S AUTHORITY TO OPERATE THE EQUIPMENT. CAUTION:

2. VOLUME CONTROL Large Small 3. POWER SWITCH ON STAND BY OFF 4. LED INDICATOR BATTER LOW CHANGING BATTER WHEN LIGHT-ON 6. MIC SENSITIVITY SWITCHING FOR ELECTRICAL INSTRUMENT FOR DYNAMIC MICROPHONE FOR CONDENSER MICROPHONE 8. BELT CLIP 2 WAYS FOR HANGING VERTICAL CROSSWISE 5. BATTERY COVER

MUST BE SWITCHED OFF AS WELL. OTHERWISE THE BATTERIES WILL SOON BE EXHAUSTED. IN ORDER TO AVOID UNTUNEFUL CON- SUPMPTION OF THE INNER BATTERY: IF PILOT LAMP OF THE WIRELESS MICROPHONE (1)REMAINS LIGHTED, IT MEANS THAT THE BATTERY HAS NO MORE POWER: (2) THE LAMP MUST FLASH ONLY FOR THE TIME OF THE SWITCHING -ON; THIS INDICATES THAT THE MICROPHONE WORKS WELL. INSTRUCTION 2. INSTALL BATTERY: PLS. MAKE SURE THE POSITIVE/NEGATIVE BEFORE YOU REPLACEMENT BATTERIES. SPECIFICATIONS FM(F3E) UHF 790~865MHz Modulation mode Frequency band RF output power Current drain Battery life (alkali) Battery Tone frequency Frequency response Frequency stability Rated deviation Spurious emissions Dimensions Net weight 45dBc 106(L) 23(W) 66(H)mm (4.2L 0.9W 2.6H in 80g (0.177 bs) 5mW 35mA More than 6 hours 9V Alkaline Battery 32.768KHz 50Hz~15KHz 0.005%/25 40KHz(MAX)