Pyle PRJLE60 Manual 

TV Shows, Movies, and Sports at Up To 100 Inches

3 Installation 4 standard setting(front projection) 4 Installation method 5 Signal connection instruction 6 Remote control instruction 7 Image adjustment 8 Focus adjustment 8 Trapeziod adjustment 8 Menu setting 9 Menu setting method 9 Trouble shooting 12 Specification 13 After-sale service 15 Warranty card 16 Accessories parts 17 Accessories Parts When you open the projector box, please check the following items. Accessory list projector 1 unit remote control 1 pc power cable 1 pc Power adapter 1 pc AV cable 1 pc Manual 1 pc Lens tissue wipes 1 pc 17

Warning: when turning of the projector,the fans will continue to run for 90 seconds. Before unplugging the power cable, please be sure the fans have stopped in order to avoid damage to the projector lamp. Remote control battery: please insert the batteries correctly, Keep the remote control out of chirdren or pets. Warning: Do not stare directly into the light of the lens . It is very bright lamp. It can cause damage to your eyes Warning : To avoid electrical shock, please do not place the projector under moist conditions Name/Company: Address: Product Purchased: Dealer Name: Telephone: Fax No.: Model No.: Date of Purchase: Serial No.: Invoice No.: Thank you very much for the purchase of this product. We offer free repair service for a period of one year from the date of purchase in accordance with the terms and condition state on the back of this card. In the event of servicing, please return faulty product with complete Warranty Card and original Invoice to the following. This card to be remained by customer

operated correctly,it can cause electrical shock or fire. when using or repairing this projector ,please comply with the following suggestions: 1,Cleaning instructions When cleaning this projector,make sure the power cable is unplugged.use a soft cloth to clean.Do not use harsh cleansers. 2,Accessories: To avoid any damages to the projector,use accessories enclosed in the package. 3.Environment conditions: Do not place the projector in wet or moist conditions. 4,Installation: please place this projector on a stable and leveled areas. . 6, Power: Match power source(220V or 110V) 7,Ground Cable: It is a 3 pin plug. 8,power cable: Inspect the power cable before plugging into the power source. 9,Lightning: When not in use for long periods of time or while storms, please unplug the cable. 10,Repair: Due to high voltage.do not attempt to repair the projector yourself.please call a professional technician. 11,Heat sensitive device: Do not use near other heating devices. It can damage the performance of the projector. 5,Ventillation: For best result,proper ventillation is requiered. Keep filter cleaned or it will cause the projector to overheat.Rinse the filter monthly . WARRANTY POLICY 1.Customer must present this warranty card when warranty service is requested during warranty period. 2.The Warranty will be treated except for the following item: a)the warranty card is lost b)the unit is damaged in transport c) the unit is damaged by personal wrong operation d) the unit have been repaired by unauthorised distributor or technician. 3. This projector only offer one year warranty period by the manufacture. During one year , if the projector are broken . Please contact with the local distributor. After one year warranty , you should pay the all broken parts material cost and service charge. 4. All freight shouold paid by customer.

+40 Humidity 10% 65% Store condition Temperature -20 +60 Humidity 10% 90% Infrared remote control Frequency 38KHz Whole products Size 205*160*70mm Weight 2KG 14 Instruction of projector Front picture Rear picture Bottom picture 1.power button 2.Indicator light red-standby;green-working 3.Focus lens 4.IR receiver; 5.N/C 6.VGA port; 7.Ventilation window 8. Ventilation window 9.Trapeziod adjustment port; 10.Interface ; 11.High-feet adjustment; 12.speaker; 13. Holes for ceiling mount 3

native resolution 640*480 support resolution 800*600 1024*768 Input signal video component video S-Video VGA HDMI ,TV,USB or SD (optional) audio stereo output signal speaker 1.5W*2 Lens Focus 125mm Lamp model LED power 50W Life 20000 hour Image size 50-100 inch Brightness 2500 ansi lumen Trapeziod correction 15 degree Input power Voltage 19V 10% Power consumption 60W Power adapter Voltage AC110-240V/50-60Hz 13 Installation Standard setting Front projection Please refer to the following sheet , adjust your picture size and distance (from the lens to screen ) warning Please check the following picture to show the trapezoid adjustment Incorrect installation, the images right-left small. Screen Screen symmetry axis Projector Incorrect installation, the images left-right small. Installed correctly, the image is rectangular. The data maybe have 3% error,due to the image size according to the distance between projector and screen if the distance is less than 2 meters or over 5 meters,the image may be distorted. Screen Size 4:3 16:9 50 inches 1.8m 2.1m 2.5m 1.9m 2.25m 2.65m 4 60 inches 72 inches

Follow the instructions belowe for the correct projector positions: screen projector screen projector Warning 1 To avoid damage beyond repair or bodily injury,secure projector mounts firmly to the ceiling or a stable surface. 2) This projector can only be used in an environment with a temperature not exceeding the range of 0- 35 degree .The projector may malfunction if temperatures vary outside the normal operating range. 3 The sharpness of the screen might be interrupted when the projector is being used in a dusty,wet,moist or smoke filled environment. The projector might malfunction in a moist or wet environment. 4 Proper ventilation avoids overheating the projector. Front projection Table mount Rear projection Table mount screen screen projector projector Problem: Possible solution(s): No power 1, Check the power cable. 2, Do not open the projector . 3, Broken fuse Remote Control 1,Allow 5 minutes(between on and off sessions) Does not function 2,Check for defective batteries.Replace if needed. 3, Aim directly towards the IR receiver. No image 1, Make sure lens cap is removed. 2, Check power cable and source 3, Check input signal. 4, The motherboard may be broken .Replace it If needed. Projector turns off 1, Dirty Filter ,Please rinse filter with water . Automatically 2, Due to faulty fans. Eg: fans stopped , Heat sensitive system. Replace the fan Immediately when needed.

sleep time off,15,30,45,60,120 CTI ON/OFF BLE ON/OFF NR ON/OFF Rotate mode1/mode2/mode3/mode4 OSD language set the OSD Language H-position set the osd H-position V-position set the osd V-position Duration 0-60 set osd display time Halftone 0-100 VGA contrast 0 100 brightness 0 100 H-position 0 100 V-position 0 100 clock 0 100 phase 0 100 color temp. Normal/warm/cold/ Installation Signal connection instruction 6 Left audio input Right audio input Component video (Y/PR/PB) port Audio out port Power adapter input port HDMI input port VGA input port TV Video Y/PB/PR VGA HDMI Source switch: 1.Press key AV/TV on remote control the screen will show source picture1 2.Press / key to choose the mode . 3.press / key to confirm picture1 Video port Auto adjust

7 10 Menu Setting CONTRAST BRIGHTNESS HUE COLOR TEMP. STANDARD Picture SATURATION SHARPNESS MOVE SELECT EXIT MENU PC Picture menu Sound menu BASS TREBLE BALANCE AUDIO OUTPUT SOUND EFFECT NORMAL STANDARD SOUND MOVE SELECT EXIT MENU PC Picture Contrast 0 100 image contrast adjustment Brightness 0 100 image brightness adjustment Hue 0 100 image Hue adjustment NTSC valid Saturation 0 100 image saturation Sharpness image sharpness adjustment Color sys. Standard,warm,cold Picture size 4:3,zoom1,zoom2,zoom3,zoom4. Zoom5,16:9 Picture mode User,standard,movie,music Remark: when PC signal input ,there is no picture menu HUE only work on NTSC SYSTEM Picture size do not show 16:9 under YPBPR/HDMI/VGA mode. Sound Sound effect User,standard,movie,music Bass 0-100 Lower volumen adjust Treble 0-100 High volumen adjust Balance 0-100 Left -right balance adjust Audio output Normal Line Speaker Line and speaker Only line output Only speaker output

1.when projector are working press menu key the menu will show on the screen(picture 1) 2.press key the menu change picture sound TV function OSD interface 3.After confirm the menu press key to choose sub-title picture 2 4.press key to adjust the sub-title picture 3 5.after all action press the menu key exit the menu setting. Note if the function mark is grey ,it indicate that this function are not valid CONTRAST BRIGHTNESS HUE COLOR TEMP. STANDARD Picture SATURATION SHARPNESS MOVE SELECT EXIT MENU PC BRIGHTNESS HUE COLOR TEMP. STANDARD SATURATION SHARPNESS MOVE SELECT EXIT MENU PC CONTRAST picture 1 picture 2 picture 3 EXIT MENU CONTRAST ADJUSTMENT 72 When using the projector first time,it will commonly appeared with image faintess and the image is trapeziod Following suggestions below to adjust focus. Turn the lens into the projector,then turn it out slowly at the same time looking at the resolution point carefully when the image is very clearly (take the middle area of the image),it is the best situation of the lens If a projected picture has keystone distortion, correct image with Keystone adjustment. The image becomes trapezoid shape when the screen or project is not level. Please reposition the projector to improve its angle to the screen. However, the circumference of the image may not be focussed. Screen High