Python 951 Owner's Manual

Remote Start Keyless Entry Owner’s Guide © 2008 Directed Electronics, Vista, CA G4702P 2008-08

Warning! Safety first .........................................................................................5 What’s included ................................................................................................8 Important information ........................................................................................8 Your warranty...........................................................................................8 Replacement remote ..................................................................................8 Out of range notification............................................................................9 Charging the Battery .................................................................................9 Low battery indicator ..............................................................................10 Battery Replacement ................................................................................10 Multi-car control capability ......................................................................11 Responder LC 2-way ........................................................................................12 LC 1-way companion ..............................................................................13 Transmitter configuration ..........................................................................13 Using the system .............................................................................................14 Additional remote start features.........................................................................21 Auxiliary features ............................................................................................28 Remote control feature programming .................................................................29 Remote setup options...............................................................................30 Menu option descriptions .........................................................................31 Pair remote setup ....................................................................................33 Demo modes .........................................................................................33 Safety features ................................................................................................34 Optional starter anti-grind circuitry ............................................................34 Disabling the remote start system ..............................................................34 Diagnostics ....................................................................................................35 Locking .................................................................................................35 Unlocking ..............................................................................................35 Remote start ..........................................................................................36 Owner recognition ..........................................................................................37 Rapid resume logic ..........................................................................................37 Power saver mode...........................................................................................37 System...................................................................................................37 2-way remote .........................................................................................38 Programming options .......................................................................................38 Convenience expansions ..................................................................................39 Glossary of terms ............................................................................................40 Quick reference guide .....................................................................................43 Limited lifetime consumer warranty ....................................................................45

Government regulations This device complies with Part 15 of FCC rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal- lation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment Off and ON, the user is encouraged to try to correct the interference by one or more of the following measures: s2EORIENTORRELOCATETHERECEIVINGANTENNA s)NCREASETHESEPARATIONBETWEENTHEEQUIPMENTANDRECEIVER s#ONNECTTHEEQUIPMENTINTOANOUTLETONACIRCUITDIFFERENTFROMTHATTOWHICHthe receiver is connected. s#ONSULTTHEDEALERORANEXPERIENCEDRADIO46TECHNICIANFORHELP Remote Controls 4OSATISFY&##2&EXPOSURECOMPLIANCEREQUIREMENTSTHISDEVICESHOULDBEUSEDin hand-held, hand operated configurations only. The device and its antenna must maintain a separation distance of 20 cm or more from the person’s body, EXCEPTFORTHEHANDANDWRISTSTOSATISFY2&EXPOSURECOMPLIANCE4HISDEVICEis designed to be used in a person’s hands and its operating configurations do NOTSUPPORTNORMALTRANSMISSIONSWHILEITISCARRIEDINPOCKETSORHOLSTERSNEXTTOa person’s body.

Control Center 4OSATISFY&##2&EXPOSURECOMPLIANCEREQUIREMENTSTHEDEVICEANDITSANTENNAmust maintain a separation distance of 20 cm or more from the person’s body, EXCEPTFORTHEHANDANDWRISTSTOSATISFY2&EXPOSURECOMPLIANCE Warning: #HANGESORMODIlCATIONSNOTEXPRESSLYAPPROVEDBYTHEPARTYRESPONSIBLEFORcompliance could void the user’s authority to operate this device.

Warning! Safety first The following safety warnings must be observed at all times: $UETOTHECOMPLEXITYOFTHISSYSTEMINSTALLATIONOFTHISPRODUCTMUSTONLYBEperformed by an authorized Directed dealer. When properly installed, this system can start the vehicle via a command signal from the remote control transmitter. Therefore, never operate the system in an enclosed area or partially enclosed area without ventilation (such as a garage). When parking in an enclosed or partially enclosed area or when having the vehicle serviced, the remote start system must be disabled using the installed toggle switch. It is the user’s sole responsibility to properly handle and keep out of reach from children all remote control transmitters to assure that the system does not unintentionally remote start the vehicle. THE USER MUST INSTALL A #!2"/.-/./8)$%$%4%#4/2)./2!"/544(%,)6).'!2%!!$*!- #%.4 4/ 4(% 6%()#,% !,, $//23 ,%!$).' &2/- !$*!#%.4 ,)6).'!2%!34/4(%%.#,/3%$/20!24)!,,9%.#,/3%$6%()#,%34/2!'%AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole responsibility of the user. Remote starters on manual transmission vehicles operate differently than those with automatic transmission because you must leave your car in neutral. You MUSTREADTHIS/WNERS'UIDETOFAMILIARIZEYOURSELFWITHTHEPROPERPROCEDURESregarding manual transmission remote starters. If you have any questions, ask your installer or contact Directed at 1-800-753-0600. Before remote starting a manual transmission vehicle, be sure to: Leave the vehicle in neutral and be sure no one is standing in front or sbehind the vehicle. Only remote start on a flat surface sHave the parking brake fully engaged sWARNING!)TISTHERESPONSIBILITYOFTHEOWNERTOENSURETHEPARKINGEMERGEN-

cy brake properly functions. Failure to do so can result in personal injury or prop- ERTYDAMAGE7ERECOMMENDTHEOWNERHAVETHEPARKINGEMERGENCYBRAKEsystem inspected and adjusted by a qualified automotive shop bi-annually. Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, or death. (1) Never remotely start the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user must also have the neutral safety feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the car is in gear. This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in the product installation guide. If the vehicle starts in gear, cease remote start operation immediately and CONSULTWITHTHEAUTHORIZED$IRECTEDDEALERTOlXTHEPROBLEM After the remote start module has been installed, contact your authorized dealer to have him or her test the remote start module by performing the Safety Check outlined in the product installation guide. If the vehicle starts when performing the Neutral Safety Shutdown Circuit test, the remote start unit has not been properly installed. The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear. All installations must be performed by an authorized Directed dealer. /0%2!4)/./&4(%2%-/4%34!24-/$5,%)&4(%6%()#,%34!243).'%!2)3#/.42!294/)43).4%.$%$-/$%/&/0%2!4)/./0%2!4- ).'4(%2%-/4%34!243934%-5.$%24(%3%#/.$)4)/.3-!92%35,4).02/0%249$!-!'%/20%23/.!,).*5299/5-534)--%$)!4%,9CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AU- THORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS. This product is designed for fuel injected vehicles only. Use of this product in a standard transmission vehicle must be in strict accordance with this guide.

This product should not be installed in any convertible vehicles, soft or hard top with a manual transmission. Installation in such vehicles may pose certain risk.

What’s included /NElVE BUTTON WAY3UPERCODE2ESPONDER,#2EMOTE#ONTROL s/NElVE BUTTON WAY3UPERCODECOMPANIONREMOTE sThe control module s#ONTROLCENTERWITHINTEGRATEDSTATUS,%$AND6ALETOVERRIDESWITCH sA remote start defeat toggle switch sWindow decals sYour warranty registration sImportant information Congratulations on the purchase of your state-of-the-art remote start system. Due TOTHECOMPLEXITYOFTHISSYSTEMITMUSTBEINSTALLEDBYANAUTHORIZEDDEALERONLYInstallation of this product by anyone other than an authorized dealer voids the warranty. All dealers are provided with a preprinted dealer certificate to verify authorization. "Y CAREFULLY READING THIS /WNERS 'UIDE PRIOR TO USING YOUR SYSTEM YOUWILL MAXIMIZE THE USE OF THIS SYSTEM AND ITS FEATURES 9OU CAN PRINT AD- ditional or replacement copies of this manual by accessing our web site at www.directed.com. ¢ Your warranty Your warranty registration must be completely filled out and returned within 10 days of purchase. Your product warranty will not be validated if your warranty registration is not returned. Make sure you receive the warranty registration from your dealer. It is also necessary to keep your proof of purchase, which reflects that the product was installed by an authorized dealer. ¢ Replacement remote controls 9OURSYSTEMCOMESWITHONE2ESPONDER,#REMOTECONTROL0. 7752P) and ONECOMPANIONREMOTECONTROL0.0 )FADDITIONALREMOTESAREDESIREDplease see your authorized dealer or visit www.directedstore.com to order.

¢ Out of range notification If a command is issued from the remote, but the remote is beyond the range of the vehicle to receive the command, the remote will respond with an out-of range notification. If this occurs, the out-of-range icon displays on the LCD and the remote emits an error tones. Since conditions will vary in different areas (ie: Weather, RF interference, etc) range may be affected and require you to be closer to the vehicle for successful transmission. ¢ System maintenance The system requires no specific maintenance. The 2-way remote contains a non-replaceable rechargeable battery. When the battery begins to weaken, the operating range will be reduced. Your 1-way remote is powered by small coin cell lightweight 3-volt lithium bat- TERYTHATWILLLASTAPPROXIMATELYONEYEARUNDERNORMALUSE4HE WAYREMOTEuses one CR2032 cell battery. ¢ Charging the Battery Plug in the USB charger (alternately a standard mini USB cable connected sto any standard USB port on any laptop or desktop computer can also be used (cable not included)). 4HE,#$DISPLAYSh#(!2'%vWHILETHEBATTERYLEVELBARSWITHINTHEBATTERYsicon flash. 7HENCHARGINGISCOMPLETETHE,#$THENDISPLAYSh&5,,vsNote: If the battery has been severely discharged all remote functions are dis- ABLEDFORASHORTCHARGEPERIOD4HEBATTERYSTATUSOUTLINEmASHESAND#(!2'%is displayed on the LCD. Once the battery has accumulated enough charge for functionality, the LCD icons initialize with a beep sound, the battery status

outline stops flashing and the remote becomes operational while still displaying #(!2'% Warning! The temperature range over which the battery can be charged is 0ºC TO 45ºC (32ºF TO 113ºF). Charging the battery at temperatures outside this range may cause severe damage to the battery or reduce bat- TERYLIFEEXPECTANCY ¢ Low battery indicator When the batteries are low on the 2-way remote it will emit two groups of beeps, the battery icon flashes and low battery is indicated on the screen. The remote then emits an additional honk, (if this option is installed), when unlocking to let you know its time to change the battery. When the battery is low on the 1-way remote, the remote responds the same way audibly. Note: The optional horn honks must be installed for the remote to emit additional honks during unlocking. Ask your authorized dealer if you have any questions. ¢ Battery Replacement 3LIDETHEDOORUPTOEXPOSETHEBATTERYBENEATHTHEHOLDER2EMOVETHEEXPIREDbattery. Place the new battery into the remote control. When power is returned the remote control is ready for use.

¢ Multi-car control capability You can use the Responder LC 2-way remote control system for two cars, with full command capability for both vehicles. To change the car to be operated: 0RESSHOLDTHE1. button for 3 seconds or until the remote beeps. The car or ICONmASHES4HE,#TEXTAREADISPLAYSTHECURRENTVEHICLESELECTED Change Car: While in car selection mode, press and release the 2. button to scroll between car and . The car icon flashes to indicate the car that can be operated. Select the car number you want to operate, and then press any command 3. button to operate the system. The selected car remains selected until the setting is changed. One-way remote Press and hold the 1. button until the amber light blinks once or twice indicating the current vehicle (one blink = car 1, two blinks = car 2). To scroll from one to the other press the 2. button again. When using the remote to control the system, the amber light will flash in a sequence of 1 or 2 flashes indicating the current vehicle mode.

Responder LC 2-way         1 2 3 4 5 6 7 8 Feature Description 1 LCD (2-way) !CTIVITYICONDISPLAY2 Lock button Press for one second to arm. 3 Unlock button Press for one second to disarm. 4 !UXILIARYBUTTON Press and hold for 1.5 second to activate optional trunk release. 5 Remote start button Press for one second to activate remote start. 6 Function button Allows access to programming and modi- fies operation of the other buttons. 7 Charge Port (2-way) Plug in the battery charger to this port. 8 Label Back of remote has label to identify the remote as 2-way or 1-way. 9 Battery Door (1-way) For accessing batteries when necessary. 10 Transmit LED (1-way) Active when communicating Note: If Keypad Lock is On, press and then press to exit.

¢ LC 1-way companion 10 2 3 4 5 6 8 9 See call out table for 2-way ¢ Transmitter configuration Button Level Direct Access X X X X Lock Silent Lock Unlock Silent Unlock 6ALET-ODE Car Finder Remote Start Reset Runtime Timer Mode Smart Start Rear Defogger A U X Trunk Release AUX 1 AUX 2 AUX 3 Function Shift Cabin Temperature request (2-way only) Runtime Check (2-way only)

Using the system Please note the screen shot to the right of a feature indicates what the display looks like when this feature is activated. Lock Command: Press one time to Lock Feedback: Lock Icon appears, and parking lights flash once. Notes: 0RESSHOLDFORSECONDSTO,OCKTHEsystem and activate the panic feature. Details: 4HEHORNINTHEVEHICLEhHONKSvONCEIFTHEOP- tion is installed), and the parking lights flash one time. If the power door locks have been connected, the doors lock. When panic is activated the horn horns if connected an the parking lights flash for 30 sec. Panic mode can be disabled by pressing (icon) lock or unlock. The system automatically checks for errors when it locks. The 2-way remote hBEEPSvONCEANDTHEPARKINGLIGHTSmASHONCETOCONlRMLOCKING)FNOLOCKconfirmation is received, the remote LC displays the out-of-range signal. If errors are found when locking: If the door was open at the time of locking, you are notified of this active zone immediately after locking the system. 4HEHORNINTHEVEHICLEhHONKSvAGAIN4HE WAYREMOTECONTROLSOUNDSASHORThERRORvTONEANDTHE,#$DISPLAYSTHEDOORICON Locking without the honk (Silent Lock) Press the button on the remote once, and then press the button. The system locks without the confirmation honk. The parking lights flash once. The 2-way re- mote displays the icon. If no lock confirmation is received, the 2-way remote emits the Out Of Range signal.

Unlock Command: Press one time to Unlock Feedback: Unlock icon appears. Notes: The vehicle horn, honks two-times and the parking lights flash two-times. The door locks (if connected) unlock, the 2-way remote beeps two-times and the LCD displays the icon. Unlocking without the honk (Silent Lock) Press the button on the remote once, and then press the button. The system unlocks without the confirmation honk. The parking lights flash once. The 2-way remote displays the icon. If no unlock confirmation is received, the 2-way remote emits the Out Of Range signal. Remote Start Command: Press one time to activate Remote Start Feedback: Remote Start icon appears on screen. The remote start tones play and parking lights flash. Notes: Before using the remote start be sure the vehicle is parked in a safe area with proper ventilation. The preset remote start run time is 12 minutes. This can be changed to between 12 and 60 minutes. The system has a feature, if programmed on, that automatically notifies you when the runtime is running low. When the system reaches 3-minutes and 1-min- ute of runtime remaining, it sends the 2-way remote control a paging signal.

Points to remember: If the hood is open or if the brake pedal is pressed, the vehicle will not remote start. The remote start shuts down: When the brake pedal is pressed. sThe hood is opened. sWhen the remote start command is sent again from a remote control. s7HENTHERUNTIMEEXPIRES sTo drive your vehicle after it has been remote started: 'ETINWITHOUTSTEPPINGONTHEBRAKE1. Insert the ignition key and turn it to the ON position. 2. Now, step on the brake. 3. The remote control will play the remote start shutdown tone. You have now taken direct control from the remote start system. Valet Take-Over 4HE6ALET4AKE /VERFEATUREALLOWSTHEVEHICLETOREMAINRUNNINGAFTERTHEKEYhas been removed from the ignition. This feature is useful for occasions when YOUWISHTOEXITANDLOCKTHEVEHICLEFORSHORTPERIODSOFTIMEBUTWOULDLIKETOleave the motor running and the climate controls on. 4OENABLE6ALETTAKE OVERWHILETHEVEHICLEISRUNNINGPRESS1 time and the parking lights will flash after a couple of seconds turn off the ignition and the CARSHOULDSTAYRUNNING/NCEYOUEXITTHEVEHICLEYOUCANLOCKTHESYSTEMANDthe car will remain running. If the vehicle shuts down, then the unit did not enter valet take-over mode.

A U X Aux Command: Press and hold for 1.5 seconds to acti- vate the Trunk Release. Feedback: The trunk icon appears and the remote plays a short tone. Notes: This is an optional feature. See your SALESREPINSTALLERFORDETAILS4HEFACTORYdefault screen displays the trunk icon and TEXT4HETEXTCANBECHANGEDBYYOURinstaller using the Bitwriter programming tool. Function shift Command: Press 1 to 4 times. (See Transmitter configuration table) Feedback: $ISPLAYSHOWSATEXTMESSAGEACROSSTHEBOTTOMFORTHECOM- mand received. Notes: Each Press then release, shifts the function of the command but- ton.

Valet mode Command: Press two-times and then . Feedback:5NLOCKICONAPPEARSHOLLOW6ALETDIS- PLAYSINTHETEXTAREAWHENENTERING6ALETMODENotes: If the system is already locked the remote BEEPSONETIMEWHENENTERING6ALETMODE7HENEX- ITING6ALETMODETHEUNLOCKICONAPPEARSSOLID6ALETISDISPLAYEDINTHETEXTAREAANDTHEREMOTEBEEPSTWOTIMES4HEUNLOCKICONis displayed but the doors stay locked. 4OENTEROREXITVALETMODEWITHTHEVALETPROGRAMSWITCH Turn the ignition key on and then off. !TANYTIMEDURINGTHENEXTSECONDSPRESSANDRELEASETHE6ALETSWITCH.OWTHE3TATUS,%$LIGHTSCONSTANTLYIFYOUHAVEENTERED6ALETš-ODEANDGOOUTIFYOUHAVEEXITED6ALET-ODE Note:4HE,%$ONTHECONTROLCENTERTURNSONSOLIDWHENIN6ALET-ODEANDSHUTSOFFWHENEXITING6ALET-ODE 7HENLOCKINGTHESYSTEMIN6ALET-ODETHESCREENDISPLAYShVALETvANDTHEREMOTETHENEMITSANERRORTONE7HENUNLOCKINGIN6ALET-ODETHESCREENDISPLAYShVALETvANDTHEREMOTEEMITSTWOERRORTONES

Car finder Command: Press three-times and then . Feedback: Remote beeps 1 short beep, the vehicle emits 1 long horn honk (if connected), and the parking lights flash 10 times. Notes,OCK5NLOCKCANCELSTHELIGHTmASHES Cabin temperature Command: Press one time, then Hold for 1.5 seconds. Feedback: Screen will display current in cabin tem- perature. Notes: Cabin temperature is displayed on the remote. Silent Lock Command: Press one- time and then press Feedback: Screen changes to the lock icon Notes: Locks the system without honks The system locks without the confirmation honk. The parking lights flash once. The 2-way remote blinks the LOCK icon to confirm locking. If no lock confirma- tion is received, the 2-way remote gives the Out Of Range signal. Fail-Safe Starter Kill sThe starter is disabled by the system’s Fail-Safe starter kill. Silent unlock

Command: Press one- time and then press . Feedback: Screen changes to unlock icon Notes: Unlocks the system without chirps ¢Overriding the optional starter kill To bypass the optional starter kill without a remote control: Use your override switch located on the control center (see diagram below) to bypass the system. This switch bypasses the system only if you have the vehicle key. To check proper operation: While the vehicle is locked, open the door. Immediately insert the key into 1. the ignition and turn it to the run or on position (all the indicators in the dash turn on). Press and release the Override Switch one time. The optional starter kill is 2. bypassed. You can now start the vehicle with the key. Note: The Override Switch feature allows you to select a specific number of presses needed to unlock the system. If the Override Switch has been pro- grammed to a new number of presses by your authorized dealer, that number should be indicated below. Override Switch Number ___________

Additional remote start features Manual transmission If the vehicle has manual transmission the proper steps must be followed before leaving the parked vehicle or the remote start feature is disabled. Make sure the engine is running and the doors are closed. 1. Put the transmission in neutral. 2. Press on the vehicle’s foot brake. 3. Apply the emergency brake. 4. Release the vehicle’s foot brake. 5. Note: Pressing the brake again after this step will disable the remote start feature. Within 15 seconds activate the remote start from the remote. 6. The parking lights will flash 5 times confirming that the remote start is ac- 7. tive. If the parking lights don't flash, then repeat steps 1 - 6. Turn off the ignition (the car should stay running when key is turned off). 8. %XITTHEVEHICLEANDCLOSETHEDOOR 9. Lock the doors with the remote. (the vehicle shuts off when locking the 10. system). 9OUCANNOWREMOTESTARTTHEVEHICLE)FADOORISOPENEDBEFORETHENEXTREMOTEstart activation the system will not remote start.

Note:4OENABLE6ALETTAKE OVERWITHAMANUALTRANSMISSIONOPENTHEDOORANDenter into manual transmission mode, as described above. The parking lights mASHONE TIMEWHENENTERING6ALETTAKE OVER/NCEYOUEXITTHEVEHICLEYOUCANlock the system and the car will remain running. If the vehicle shuts down when locking, then the unit did not enter valet take-over mode. Timer mode Command: Press two-times and then . Feedback 3MALLTIMERICONDISPLAYSANDTIMERSTARTONDISPLAYSINTHETEXTarea. The parking lights flash 4 times fast to confirm. Notes: Enables or disables the remote start timer mode. The system must be locked for the timer mode to operate. The system will start EVERYHOURSFORAMAXIMUMOFSIXCYCLESUNTILCANCELEDBYTHEBRAKEHOODor neutral safety shut-down wires. The remote will respond with the Start and 3TOPREMOTESTARTNOTIlCATIONDURINGEACH3TARTAND3TOPOFTHE6EHICLEWHILEINTimer mode. To activate timer mode with a manual transmission: Enter the MTS mode. 1. %XITTHEVEHICLELOCKTHEDOORSWITHTHEREMOTE 2. Enter the timer mode. The parking lights quickly flash 4 times to confirm 3. ENTRYINTOTIMERMODEVEHICLEDOESNOTREMOTESTARTATTHISPOINT 6EHICLEbegins the timer mode sequence. To exit timer mode with transmitter: Press stwice and then press . Parking lights flash slowly four times CONlRMINGTIMEMODEISEXITED To exit timer mode without transmitter: Make sure the remote start system is not operating the engine. 1. 4URNTHEIGNITIONON4IMER-ODEISEXITEDANDTHEPARKINGLIGHTSmASH2. slowly four times.

4IMER-ODEISEXITEDAUTOMATICALLYAFTERTHESIXTHRUNCYCLE4HEPARKINGLIGHTSSLOWLYmASHTIMESWHENEXITINGTIMERMODE Note:4HE"ITWRITERšCANCHANGETHEAMOUNTOFTIMESTHEREMOTESTARTACTIVATESand, it can change the intervals between activations in timer mode. Turbo Timer mode Turbo timer mode keeps the engine running after arriving at your destination for a programmable period of 1, 3, 5 or 10 minutes. This allows the system’s timer to conveniently cool down the turbo after you have left the vehicle. The system monitors the engine speed and will automatically shut the engine off if the RPMs rise above or fall below the programmed levels. This feature prevents damage to the motor due to fuel delivery system failures or other problems that may cause the engine to race To activate Turbo Timer Mode with an automatic transmission: Make sure the Turbo timer feature is turned on in the features grid. 1. Open the vehicle door. 2. 7HILETHEVEHICLEISRUNNINGPRESSTHE3. button twice followed by the button. The parking lights flash once and the remote plays the remote start activa- 4. tion tone confirming that the remote start is activated (the one way remote only flashes the parking lights). Turn off the ignition (car stays running). 5. %XITTHEVEHICLEANDLOCKTHESYSTEM 6. At this point the vehicle stays running for the programmed runtime.

To activate turbo timer mode with a manual transmission: Enter MTS mode with the door open. 1. Transmit the timer mode feature with the remote by pressing 2. two-times, and then . !FTEREXITINGTHEVEHICLELOCKTHESYSTEMANDTHEVEHICLEREMAINSRUNNINGFOR3. the programmed runtime. (The remote start feature is still enabled). You can still remote start the vehicle after the turbo timer has timed out and shut off the vehicle. For safety reasons, if a door is opened (while the system is locked ORUNLOCKED WHILEYOUAREAWAYTHEREMOTESTARTEXITSTHEMANUALTRANSMISSIONmode and does not remote start until the MTS sequence is re-initiated. Note: An optional push button can be hard wired to the (-) activation input ( ONTHEREMOTESTART4HISALLOWSTHEUSERTOACTIVATETHETURBOTIMERwithout having to use the remote. When the vehicle is running follow the procedures listed above, but instead of pressing the remote, press the push button the appropriate number of times to ac- tivate the remote start (factory setting is for 1 pulse). The remote emits the remote STARTCONlRMATIONTONE.OWYOUCANTURNOFFTHEIGNITIONANDEXITTHEVEHICLEThe car remains running for the pre-programmed amount of time.

Runtime check Command: While the remote start is running, press two-times, and then Hold for 1.5 seconds. Feedback 4EXTREADSRUNTIMEANDDISPLAYSTIMELEFT Notes: This feature is only available on the 2way remote. Runtime reset Command: While the remote start is running, press one-time and then . Feedback: Remote start ON tones. Notes: Re-starts the remote start runtime counter if remote start is ac- tive. Note: If remote start is not active, the 2-WAY remote will respond with error tone. Rear defogger Command: Press four times, and then . (Only after remote start is on.) Feedback $EFOGGERICONAPPEARSONREMOTEANDTEXTREADS$EFROST/N Notes: While the remote start is running the defroster will manually be turned on for one remote start cycle. When the remote start shuts down, the defroster will work normally. The defroster turns on when the temperature inside the vehicle is 55 degrees or below when this feature is wired and enabled.

Smart start Command: Press three-times and then press . Feedback: The parking lights flash 5 times fast and 'Smart Start On" dis- PLAYSINTHETEXTAREANotes: Enables or disables the SmartStart feature. The smart start fea- ture of this system will allow you to have the remote start ac- tivate when the vehicle reaches a certain temperature (hot or cold) or a certain voltage. The factory setting for temperature high is 100 °F the setting for low is 0 °F. The voltage setting is FOR6 These settings can be adjusted or turned off by your installer when using the Bitwriter. To activate the Smart Start Mode with a manual transmission: Enter the MTS procedure. 1. %XITTHEVEHICLEANDPRESSTHE2. button on the remote (the vehicle will shut down when locking). Press the 3. button on the remote 3 times and then press the button. The 2 way remote will beep once and Smart Start On is displayed in the 4. TEXTAREA The parking lights on the vehicle will flash 5 times fast confirming entry into 5. smart start mode The vehicle will now remote start when the cabin temperature reaches 6. the programmed thresholds or when the vehicle battery reaches the pro- grammed voltage. 4HE3MART3TART-ODECANBEEXITEDBYFOLLOWINGTHEACTIVATIONPROCEDUREWITHthe remote or can be deactivated manually by turning on the ignition or pressing the brake pedal in the vehicle. The parking lights will flash 5 times slow confirm- INGTHAT3MART3TART-ODEISEXITED

Details: Smart start uses temperature and voltage settings to determine when the vehicle should start and run. If any changes to temperature or voltage are made using the Bitwriter programming tool Smart start activation is affected. The Smart Start function works similar to the Timer mode. The system must be INTHELOCKEDMODE5SINGTHESYSTEMDEFAULTSETTINGSITHASAMAXIMUMOFSTARTINGCYCLESANDCHECKSTHEVOLTAGECABINTEMPERATUREEVERYHOURSTOSEEif the thresholds have been met. If thresholds have been met then the remote start will start the vehicle and run for the pre programmed time. It counts the first start as one successful start, leaving 5 start cycles. If the threshold has not been met then the system will not start the vehicle, and 6 start cycles are left. The unit continues to check threshold levels every 3 hours.

Auxiliary features Aux 1 Command: Press one time and then press AUX . Feedback 4EXTDISPLAYSTHEITEMACTIVATED Notes4HISISANOPTIONALFEATURE3EEYOURSALESREPINSTALLERFORdetails. Aux 2 Command: Press two times and then press AUX . Feedback 4EXTDISPLAYTHEITEMACTIVATED Notes4HISISANOPTIONALFEATURE3EEYOURSALESREPINSTALLERFORDE- tails. Aux 3 Command: Press three times and then press AUX . Feedback 4EXTDISPLAYSTHEITEMACTIVATED Notes4HISISANOPTIONALFEATURE3EEYOURSALESREPINSTALLERFORDE- tails. &ACTORYDEFAULTISPULSED4HETEXTCANBECHANGEDBYYOURINSTALLERUSINGTHE"ITWRITERšPROGRAMMINGTOOL

Remote control feature programming The Responder LC 2-way remote control has menus for configuring the remote control user features and for programming the remote to the system control mod- ule. Before you start make sure the keypad is unlocked. (See page 12) To program the remote user features: Press and hold the button on the remote for about 8 seconds. (ignore the car INDICATORATSECONDS 4HESTATUSSCREENCLEARSANDh-AIN-ENUvISDISPLAYEDINTHETEXTDISPLAYAREAOFTHESCREEN Release the button to display the Remote Options menu. Options Description Remote Setup Allows feature programming of the remote Sensor Adjust Not available with this system Pair Remote Sets up remote for programming to the system Demo Mode Places remote in demo mode %XIT %XITSPROGRAMMING Press the AUX button to scroll up, and press the button to scroll down the main menu. &ROMTHE-AIN-ENUONCEAFEATURENAMEISDISPLAYEDINTHETEXTDISPLAYAREApress and hold the button until the remote beeps to confirm entry into the selected feature menu. To access feature menu options, scroll up pressing the AUX button, or scroll down by pressing the button. 7HENTHEFEATURETHATYOUWANTTOPROGRAMISDISPLAYEDINTHE,#$TEXTAREApress and hold the for 1 second to save the feature. The LCD screen returns TOTHEPREVIOUSOPTIONSMENU9OUCANSAVEANDEXITTHEPROGRAMMINGMODEanytime by pressing the or . Programming mode is automatically EXITEDWITHOUTSAVINGIFTHEREISNOREMOTEACTIVITYFORSECONDS Note:3ELECTINGh"ACKvRETURNSTOTHEPREVIOUSMENUWITHOUTSAVINGTHESETTING

¢Remote setup options Feature Opt 1 Opt 2 Opt 3 Opt 4 Opt 5 Auto keypad lock On Off Back Page On Off Power save Back Page alert 6IBE Tone Both Screen only Back Remote start display Clock Temp Runtime Back Low runtime alert On Off Back Car 2 On Off Home Back Back light color Off 1-7 Back Temp units F° C° Back Button press beep On Off back System type Remote start & Security Remote start Back Clock set Clock time Back

¢ Menu option descriptions Auto keypad lock sAutomatically locks the remote buttons when the buttons are not used for SECONDS0REVENTShACCIDENTALvPRESSESOFTHEREMOTEPress then to unlock the keypad. Note: If the auto keypad lock feature is programmed On, the remote un- locks when the vehicle ignition is turned Off. The remote stays unlocked to ALLOWTIMETOEXITANDUNLOADTHEVEHICLEANDTHENLOCKTHEDOORSWITHTHEremote. When the button is pressed, the keypad auto lock feature resumes normally. Page On or Off and Power save s7HENPAGINGISh/NvTHEREMOTECHECKSTHESTATUSOFTHESYSTEMEVERYFOURseconds, and reports any factory alarm triggers (if the system is within the operating range and the factory alarm option is installed). )NTHEPAGINGh/FFvSETTINGTHEREMOTEDOESnot check the status of the system. In the paging Off mode the remote beeps when a button on the remote is pressed. )NTHEhBATTERYSAVERvMODETHEREMOTEGOESINTOSLEEPMODEIFNOBUTTONSare pushed for 72 hours. The timer resets each time a button is pressed. 0AGE!LERT6IBE"EEP4ONE"OTHOR3CREENONLY sReceive command confirmations on the remote with vibrations, beeps or both, or with display only. Remote start display: Clock, temperature and runtime s!LLOWSYOUTOCHOOSEWHATISDISPLAYEDINTHETEXTDURINGTHEREMOTESTARTsequence. Clock displays the current time during remote start. Temperature displays the current cabin temperature during the remote start. Runtime displays the runtime remaining during the remote start.

Low Runtime Alert sThe remote reports with one short beep followed by 1 short error tone REPEATEDTWICE ANDTHETEXTAREADISPLAYSRUNTIMEWHENTHEREMOTESTARTruntime is at the 3-minutes remaining. The remote beeps one more time when 1 minute is remaining. You have the option to let the remote start time OUTORUSETHEhRUNTIMERESETvFEATURE7HENPROGRAMMEDh/FFvYOUWILLnot receive a low runtime alert on the remote. #AR/NOR/FF(OMEsTurns Off or On, the 2 car operation from the remote. The "Home" option is not available. "ACKLIGHT#OLOR/FF  sTurn Off the LCD backlighting or change the color of the backlighting. Color options include: Blue, green, red, aqua, purple, lime, clear Temperature Units F and C sDisplay temperature in Fahrenheit or Celsius Button Press Beep On or Off sTurn Off beeps when a button on the remote is pressed System Type Remote Start & Security or Remote Start sSelect the type of system you are using, security system with remote start or a keyless entry system with remote start (to ensure that the correct icons are displayed on the LCD) Clock Set sTo enter clock set mode, Press the BUTTON4HE,#TEXTDISPLAYREADS"hour" to confirm entry in the clock set menu. Press the AUX button to move up the menu, press the button to move down the menu. !FTERYOUSELECTTHETIMEINCREMENTHOURMIN PRESS. The hour or minute flashes. Press the AUX button to move up to the hour or minute, and press the button to move down to the hour or minute you want to set. Once the desired time has been reached you can either choose "back" in the menu or press or TOSAVEANDEXIT

¢Pair remote mode It is recommended that this feature for programming the remote to the system is performed by your installer. ¢ Demo modes One-time with sound s4HE,#$ICONSDISPLAYONEATATIMEWITHICONNAMEDISPLAYEDINTHETEXTfield, while the remote is playing tones. One-time without sound sThe LCD icons display one at a time until they are all turned on. The remote does not play any tones. Note: If the charger is plugged into the remote and demo mode is acti- vated, the remote plays the demo mode continuously. The continuous loop DEMOMODEISEXITEDWHENTHECHARGERISDISCONNECTED

Safety features This system has several important safety features to ensure proper operation of the motor and prevent accidental damage to the engine or its components. ¢ Optional starter anti-grind circuitry Whenever the vehicle is remote started, advanced anti-grind circuitry prevents the starter from engaging, even if the key is turned to the start position. This pre- vents damage to the starter motor if the key is turned to the start position during remote start operation. Note: Anti-grind circuitry only works when the remote start system is operating THEMOTORANDTHEOPTIONAL&AILSAFEš3TARTER+ILLRELAYISINSTALLED ¢ Disabling the remote start system This feature allows the remote start unit to be temporarily disabled to prevent the vehicle from being remote started accidentally. This feature is useful when the vehicle is being serviced or stored in an enclosed area. To disable the remote start, move the shutdown toggle switch to the Off position. Check with your installer for the location of the shutdown switch. Location of Shutdown Switch____________________________

Diagnostics The microprocessor at the heart of the system is constantly monitoring the switch- es that are connected to the main unit. ¢ Locking If the system is locked at the same time that the door is active, you will hear one horn honk to indicate locking and a second horn honk to indicate Bypass Notification. &OREXAMPLEIFYOURVEHICLEHASANINTERIORLIGHTEXITDELAYANDYOULOCKTHEsystem before the interior light turns Off, you may hear a second Bypass Noti- fication honk. Note: Bypass Notification does not occur when the system is in Silent Mode or if the notification honks have been programmed Off by the installer. ¢Unlocking %XTRAHONKSWHENUNLOCKINGTHESYSTEMISANOTIlCATIONTHATTHEBATTERIESINTHEremote are low and need to be replaced. Important: The optional horn honk feature must be installed.

¢ Remote start This system can provide you with information to indicate what the problem is when using the remote start. When the remote start is activated and fails to engage, count the parking light flashes to determine the problem. The parking lights will flash between 5 - 8 times to indicate what caused the no start situa- tion. smASHESBRAKEWIREISACTIVE smASHESHOODPINISACTIVE smASHESMANUALTRANSMISSIONMODEISENABLEDANDNOTINITIALIZED s mASHES NEUTRAL SAFETY WIRE HAS NO GROUND OR THE REMOTE START defeat toggle switch is off. Keep a record of the number of flashes, to assist your installer when taking the vehicle in for service.

Owner recognition Owner recognition lets up to four users of the system have unique settings that meet their specific needs. It is almost like having four separate systems in your vehicle, one for each user. This feature is only available to authorized dealers using the Bitwriter or Bitwriter 2 program tool. Rapid resume logic This Directed system will store its current state to non-volatile memory. If power is lost and then reconnected the system will recall the stored state from memory. &OREXAMPLEIFTHEUNITISIN6ALET-ODEANDTHEBATTERYISDISCONNECTEDFORANYreason, such as servicing the car, when the battery is reconnected the unit will STILLBEIN6ALET-ODE4HISAPPLIESTOALLSTATESOFTHESYSTEMINCLUDINGLOCKORunlock. Power saver mode ¢ System 9OURSYSTEMAUTOMATICALLYENTERS0OWER3AVER-ODEWHILELOCKEDORIN6ALETMode, after a period of time in which no operation has been performed. This lowers the current draw on the vehicle’s battery. Power Saver Mode takes over under the following conditions: Power Saver when the system is locked: After the system has been Locked for 24 hours the LED will flash at half its normal rate, decreasing the system’s cur- rent draw. Power Saver in Valet Mode:7HENTHESYSTEMENTERS6ALET-ODETHE3TATUS,%$on the Responder LC control center illuminates steadily. If the vehicle is not used IGNITIONISNOTTURNEDON FORAONE HOURPERIODWHILETHESYSTEMISIN6ALET-ODETHESTATUS,%$WILLSHUT/FF)FTHESYSTEMREMAINSIN6ALET-ODETHE,%$WILLCOMEBACKONTHENEXTTIMETHEIGNITIONISTURNEDONANDTHENBACK/FF

¢ 2-way remote Your Responder LC 2way remote control has a feature called remote power save mode. When programmed On under remote options, the remote conserves power by disabling the paging function if unused for more than 72 hours. Pressing any button on the remote restores the paging function. The default setting is On. See Remote control programming section of this guide or ask your dealer for details on how to program. Programming options Your system has many custom programmable options. Some may require instal- lation labor. Ask your authorized dealer for details. The following is a list of the programmable options, with the factory settings in Bold. Active s locking (remote only) passive locking will lock the doors 30 sec- ONDSAFTERTHEIGNITIONISTURNED/FFANDTHELASTDOORHASBEENCLOSEDORAuto Re-lock automatically locks 60 seconds after unlocking (if no door is opened). ,OCKING5NLOCKINGWITHHORNHONKSsOn or Off. Ignition controlled door lock feature On or sOff: When this feature is pro- grammed on, the doors will lock three seconds after the ignition is turned on, and unlock when the ignition is turned Off. If your installer is programming the system, ignition lock and unlock are independent features that can be programmed separately. Panic mode enabled sDISABLED WHEN THE IGNITION IS TURNED ON OR COM- pletely turned Off. (Some states have laws against horns continually honk- ing in moving cars.)

Comfort closure s is a programming option which closes the vehicle’s win- dows after remote locking. Note: Comfort closure can only be used on cars that have the capability of closing the windows (and on some cars the sunroof as well) with the key cylinder in the door. Convenience expansions ,ISTEDBELOWARESOMEOFTHEEXPANSIONOPTIONSAVAILABLE0LEASECONSULTYOURDEALERFORACOMPLETEEXPLANATIONOFALLTHEOPTIONSAVAILABLETOYOU Factory Alarm Trigger Notification: This system has an input that can be connected to the horn circuit in the vehicle. )FTHEVEHICLEHASAFACTORYALARMANDISCONTROLLEDBYTHISSYSTEMFORLOCKUN- lock), the remote reports when the factory alarm has been triggered. When the factory alarm is triggered the remote screen displays the alarm icon and "alarm DOOROPENISDISPLAYEDINTHETEXTAREA Note: The remote must be in range and the system locked to receive the report. The system does not report that the factory alarm has been triggered when unlocking with the remote. Power Trunk Release: The accessory output of the system can operate a factory power release for the vehicle’s trunk or hatch. Sometimes an optional relay is REQUIRED)FTHEFACTORYRELEASEISNOTPOWER ACTIVATED$IRECTEDšS4TRUNKrelease solenoid can often be added. Power Window Control: Automatic power window control is provided with the 529T and 530T systems. These can operate power windows, and can roll them up automatically when the system is Locked, roll them down, or both up and down.

Glossary of terms 2-Way Remote: A hand-held, remote control which operates the various func- tions of your system and receives feedback and pages from the system. Control Center: The control center contains the system’s radio-frequency antenna, THEVALETANDOVERRIDESWITCHANDTHE3TATUS,%$&ORMAXIMUMREMOTE CONTROLrange, the Control Center is usually located at the top of the windshield, cen- tered near the rear-view mirror. Control Module:4HEhBRAINvOFYOURSYSTEM5SUALLYHIDDENUNDERNEATHTHEDASHarea of the vehicle. It houses the microprocessor which monitors your vehicle and controls all of the system's functions. Failsafe® Starter Kill (if equipped): An automatic switch controlled by the system which prevents the vehicle’s starter from cranking whenever the system is locked. The vehicle is never prevented from cranking when the system is unlocked in 6ALETš-ODEORSHOULDTHESTARTERKILLSWITCHFAIL9OURSYSTEMISREADYFORTHISfeature, however installation of this feature may require additional labor. Input:!NYPHYSICALCONNECTIONTOTHESYSTEM!NINPUTCANBEPROVIDEDBYEXIST- ing systems in the vehicle, such as ignition or courtesy lights. In-vehicle status LED: A light used to indicate the status of your system. It is located on your systems control center. Valet Button: A small push button switch located on your systems control center. It is used to override the starter interrupt when a 2-way remote is lost or damaged, ORTOENTEROREXIT6ALET-ODE

LCD Iayout  ALL ¢ LCD remote features 1 Lock 9 4HERMOMETER3MARTSTART 2 Locked in valet 10 Battery Status 3 Unlock 11 (OOD4RIGGER 4 Unlocked in valet 12 (OOD:ONEBYPASS 5 Alarm 13 4RUNK4RIGGER 6 Remote Start 14 4RUNK:ONEBYPASS 7 Timer Mode 15 Pager On 8 Manual Transmission En- abled 16 Pager Off

17 6IBE/N 27 Car Door 18 Pager Tone On 28 (OME'ARAGE /PEN 19 3IREN 29 (OME'ARAGE#LOSE 20 3ILENT-ODE 30 Car 1 21 Transmit 31 Car 2 22 Receive 32 ALL !LL:ONES 23 Out of Range 33 Defroster 24 3ENSOR 34 Sound Wave 25 3ENSOR"YPASSED 35 ,ARGE3IREN 26 Car Door (Zone bypass) &EATUREONLYAVAILABLEONFULLSECURITYANDREMOTESTARTSYSTEMS$OESNOTAPPLYto 4702 model. &EATURENOTAVAILABLE Cut along the dotted line and fold to keep in purse or wallet for a quick and easy reference.  

Quick reference guide ¢ÊLocking To lock, press the button. The remote beeps one-time and the LCD displays "locked" ¢ÊUnlocking To unlock press the button. The remote beeps two-times and the LCD displays "unlock". ¢ÊBypassing the optional starter kill without a remote 4URNONTHEIGNITION0RESSANDRELEASETHE6ALETBUTTONWITHINSECONDS The vehicle should now start. If it does not, you may have waited too long or pressed the button incorrect number of times. .UMBEROF6ALETBUTTONPRESSESFORDISABLING?????????????????? ¢ÊSilent Lock Press one-time and then press The lock icon turns on and the LCD displays "silent lock". ¢ÊSilent UnLock Press one-time and then press . The unlock icon turns on and the LCD displays "silent unlock". ¢ÊRemote Start Press 4HEREMOTEWILLPLAYTHEREMOTESTARTTONESANDTHE,#$TEXTWILLdisplay "remote start on" when activating. When deactivating the remote STARTTHEREMOTEWILLPLAYTHEREMOTESTART/FFTONESANDTHE,#$TEXTWILLdisplay "remote start Off". Cut along the dotted line and fold to keep in purse or wallet for a quick and easy reference.  

¢Rear Defogger Press four-times, and then press (only after remote start is On.) The remote beeps one-time. ¢ÊTo disable the remote start system Move the shutdown toggle switch to the Off position. Location of Shutdown Toggle Switch___________________ ¢Ê6ALET-ODE Press two-times and then The remote will beep once and the LCD displays "valet" when enabled. When disabling the remote will beep twice and the LCD displays "valet". ¢Ê6ALETTAKE OVER Before turning Off the engine, press and release the 1. button. Then wait a few seconds. Turn the ignition key to the Off position. 2. %XITTHEVEHICLEANDLOCKTHEDOORSWITHTHEREMOTE 3. The engine will remain running until the programmed time elapses or a shut-down input is received.

Limited lifetime consumer warranty $IRECTED%LECTRONICSh$IRECTEDv PROMISESTOTHEORIGINALPURCHASERTOREPAIRORREPLACEATDirected’s election) with a comparable reconditioned model any Directed unit (hereafter THEhUNITv EXCLUDINGWITHOUTLIMITATIONTHESIRENTHEREMOTETRANSMITTERSTHEASSOCIATEDsensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the unit was purchased from an authorized Directed dealer, the unit was professionally INSTALLEDANDSERVICEDBYANAUTHORIZED$IRECTEDDEALERTHEUNITWILLBEPROFESSIONALLYreinstalled in the vehicle in which it was originally installed by an authorized Directed DEALERANDTHEUNITISRETURNEDTO$IRECTEDSHIPPINGPREPAIDWITHALEGIBLECOPYOFTHEbill of sale or other dated proof of purchase bearing the following information: consumer’s NAMETELEPHONENUMBERANDADDRESSTHEAUTHORIZEDDEALERSNAMETELEPHONENUMBERAND ADDRESS COMPLETE PRODUCT DESCRIPTION INCLUDING ACCESSORIES THE YEAR MAKE ANDMODELOFTHEVEHICLEVEHICLELICENSENUMBERANDVEHICLEIDENTIFICATIONNUMBER!LLCOM- ponents other than the unit, including without limitation the siren, the remote transmitters and the associated sensors and accessories, carry a one-year warranty from the date of PURCHASEOFTHESAME!,,02/$5#432%#%)6%$"9$)2%#4%$&/27!22!.492%0!)2WITHOUT PROOF OF PURCHASE WILL BE DENIED. This warranty is non-transferable and is automatically void if: the original purchaser has not completed the warranty card and mailed it within ten (10) days from the date of purchase to the address listed on the CARDTHEUNITSDATECODEORSERIALNUMBERISDEFACEDMISSINGORALTEREDTHEUNITHASBEENMODIFIEDORUSEDINAMANNERCONTRARYTOITSINTENDEDPURPOSETHEUNITHASBEENDAMAGEDby accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in materials or construction. The warranty does not cover damage to the unit caused by installation or removal of the unit. Directed, in its sole discretion, will DETERMINEWHATCONSTITUTESEXCESSIVEDAMAGEANDMAYREFUSETHERETURNOFANYUNITWITHEXCESSIVEDAMAGE4/ 4(% -!8)-5- %84%.4 !,,/7%$ "9 ,!7 !,, 7!22!.4)%3 ).#,5$).'BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON- ).&2).'%-%.4 /& ).4%,,%#45!, 02/0%249 !2% %802%33,9 %8#,5$%$ !.$DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME &/2)4!.9$549/",)'!4)/./2,)!"),)49).#/..%#4)/.7)4()4302/$5#43DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS /&4()2$0!24)%3).#,5$).')43!54(/2):%$$%!,%23/2).34!,,%23$)2%#4%$3%#52)49 3934%-3 ).#,5$).' 4()3 5.)4 !2% $%4%22%.43 !'!).34 0/33)",%4(%&4 $)2%#4%$ )3 ./4 /&&%2).' ! '5!2!.4%% /2 ).352!.#% !'!).346!.$!,)3-$!-!'%/24(%&4/&4(%!54/-/"),%)430!243/2#/.4%.43!.$ (%2%"9 %802%33,9 $)3#,!)-3 !.9 ,)!"),)49 7(!43/%6%2 ).#,5$).'

02)#% /& 4(% 5.)4 $)2%#4%$ 3(!,, ./4 "% 2%30/.3)",% &/2 !.9 $!-!'%37(!43/%6%2).#,5$).'"54./4,)-)4%$4/!.9#/.3%15%.4)!,$!-!'%3).#)$%.4!,$!-!'%3$!-!'%4/6%()#,%$!-!'%3&/24(%,/33/&4)-%,/33 /& %!2.).'3 #/--%2#)!, ,/33 ,/33 /& %#/./-)# /00/245.)49!.$4(%,)+%./47)4(34!.$).'4(%!"/6%4(%-!.5&!#452%2$/%3/&&%2!,)-)4%$7!22!.494/2%0,!#%/22%0!)24(%#/.42/,-/$5,%35"*%#44/4(% #/.$)4)/.3 !3 $%3#2)"%$ (%2%). 4()3 7!22!.49 )3 6/)$ )& 4(% 5.)4HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED $%!,%2/2)&4(%5.)4(!3"%%.$!-!'%$"9!##)$%.45.2%!3/.!",%53%.%',)'%.#%!#43/&'/$.%',%#4)-02/0%23%26)#%/2/4(%2#!53%3./4!2)3).'/54/&$%&%#4).-!4%2)!,3/2#/.3425#4)/. 3OMESTATESDONOTALLOWLIMITATIONSONHOWLONGANIMPLIEDWARRANTYWILLLASTORTHEEXCLU- sion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. This warranty is only valid for sale of product(s) within the United States of America. 0RODUCTS SOLDOUTSIDEOFTHE5NITED3TATESOF!MERICAARESOLDh!3 )3vANDSHALLHAVE./7!22!.49EXPRESSORIMPLIED4HISPRODUCTMAYBECOVEREDBYA'UARANTEED0ROTECTION0LANh'00v 3EEYOURAUTHORIZED$IRECTEDDEALERFORDETAILSOFTHEPLANORCALL$IRECTEDCustomer Service at 1-800-876-0800. Make sure you have all of the following information from your authorized Directed dealer: A clear copy of the sales receipt, showing the following: o Date of purchase o Your full name and address o Authorized dealer’s company name and address o Type of alarm installed o Year, make, model and color of the automobile o Automobile license number O6EHICLEIDENTIFICATIONNUMBER o All security options installed on automobile o Installation receipts 920-0003 06-06

www.directed.com © 2008 Directed Electronics—All rights reserved The company behind this system is Directed Electronics Since its inception, Directed Electronics has had one purpose, to provide consumers with the finest vehicle security and car stereo products and accessories available. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology. Directed is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and around the world. Call (800) 274-0200 for more information about our products and services.