Python Responder LC Model 991 Installation Manual

 D2D The system has the ability to interface with an XK module through the D2D port. The advantage to using a D2D interface is that there is less wiring involved in the installation. Check the XK module installation guide to determine which wires are not needed, and which options are available.   The control center The control center position should be discussed with the vehicle’s owner prior to installation. The LED and Valet switch is housed on the control center, so you may want to check that the customer is satisfied with the locat ...

H2/8 BROWN/BLACK (-) HORN HONK OUTPUT This wire is low current output (200mA) and can be hooked to the horn honk wire in the vehicle. It can be programmed to sound only during full trigger or to be used like a siren output with arm/disarm honks. Refer to System Features Menu#1, Feature 10, for more information.  Heavy Gauge, 10-pin connector There are 9 heavy gauge wires coming from the large 10-pin connector. They are used to energize the ignition circuits in the vehicle. It is crucial to ensure that these connections are capable of hand ...

  Menu 2 - Convenience 2-1 One time bypass Off (1): One time bypass ON. When programmed On (2) the unit does not passively arm/lock for one cycle when turning the ignition On and Off within 3 seconds. When going through this procedure the siren chirps once indicating that One Time Bypass has been activated. 2-2 Nuisance Prevention® Circuitry (NPC) On (1): Nuisance Prevention Circu- ity OFF (2). NPC stops repeated triggering of the same zone. If one zone is triggered three times in one hour, that zone is bypassed for one hour, starting fr ...

tional dome light supervision feature must be installed as described in the Wire Connection Guide. Ignition controlled dome light Off (2). 2-6 FAD w/trunk release On (1): FAD w/trunk release OFF (2). In the default setting the factory alarm disarm output disarms the factory alarm system any time the button controlling the trunk release output is pressed. 2-7 Factory Alarm Disarm/With Unlock (1), Before Unlock (2), Remote Start Only (3): In the default setting the factory alarm disarm output disarms the factory alarm system any time the butt ...