Supra SV20B50A Operation & User’s Manual

SUPRA CORPORATION 10F, Irimajiri Bldg., 6-40, Shin Ogawacho Shinjuku-ku, Tokyo, 162-0814, Japan Users Manual VIDEO CASSETTE RECORDER SV20B50A DV-K2T1DX-RB/H_cover 01.4.18 2:2 PM ˘ ` 1

Please keep the video machine's guarantee card and receipt safe for warranty purposes. N Read carefully through this manual to familiarize yourself with this high-quality video recorder. N Make sure the rating of your household electricity supply matches that shown on the back of the video recorder. N Refer to this chapter and the "Initial installation" chapter to help you install and adjust your video recorder. Do not ... ... expose the video recorder to high levels of humidity and heat, to avoid the risk of fire and electric shock. ... open the video recorder. Have a qualified technician carry out repairs. ... connect the video recorder to the power supply if you have just moved it from a cold to warm environment. This can result in condensation inside the recorder and cause serious damage to the machine and cassettes. Wait around two hours to allow it to reach room temperature. Make sure ... ... the recorder is placed on a steady, flat surface. ... the recorder should be placed at least 10cm apart from the other home appliances or the obstacles to get sufficient ventillation. ... you clean the recorder only with a soft, lint-free cloth; do not use aggressive or alcohol-based cleaning agents. ... you disconnect the power supply if the recorder appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the recorder. ... you disconnect the power supply and aerial if you will not be using the recorder for a long period or during a thunderstorm. N This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on this apparatus. For your own safety! N There are no components in this video recorder you can service or repair yourself. N Do not open the case of the video recorder. Only allow qualified personnel to repair or service your set. N This video recorder is designed for continuous operation. Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the mains, you have to unplug it. N Recording any copyright protected material may infringe a copyright. 1 AUTO SET CH. OP EJECT W O R T H k n o w i n g DV-K2T1DX-RB/H_(GB) 01.4.18 2:4 PM ˘ ` b

N The remote control is the principle means of control, but the main playback and record functions are also available on the front of the machine. N Press any button to turn on the power. power on/off This button is not available for this set a button for selecting input sources for recording: TV stations – input sockets clock/counter on-screen display This button is not available for this set This button is not available for this set CM skip button to cue the tape for 30 seconds to eject the cassette the variable slow motion button This button is not available for this set to search the beginnings of records (index) a button that doubles the maximum recording time for very long recordings the record or OTR button (One Touch Recording means: each time you press the button recording is extended by 30 minutes) pause (record), still (playback) playback start playback stop rewinding/fast forwarding a cassette from stop, or picture search backwards/forwards from playback mode number buttons to select programmes (stations) or to type in numbers the menu controls, programme (station) selection (PR +/–) 2 The buttons to use are marked on the following pages. This button is not available for this set 30° max. 7 m. 30° TV/VCR PR PR MENU EJECT PAL/SEC A.SEL AV SP/LP INDEX 1 2 3 4 5 6 7 8 9 0 30 A F U N C T I O N S TV/VCR AV 30 EJECT SP/LP PR PR MENU A.SEL PAL/SEC INDEX 1 2 3 4 5 6 7 8 9 0 This button is not available for this set VIDEO RECORDER DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 2

N Press any button to turn on the power. Standby/on playback stop and ejecting the cassette 3 MAIN MENU Timer Program PR Preset VCR Setup Tape Control PR+/-:select OK:confirm MENU:end VCR SETUP Clock Set Language Set RF Output Set 16:9 Set PR+/-:select OK:confirm MENU:end example “Tape Control” Menu appears only when a tape is in the VCR. The menus show you which button to press for the next step. In addition, some other functions appear on screen temporarily. REW SP PR04 EURO programme (station) selection recording or OTR (One Touch Recording means: each time you press the button recording is extended by 30 minutes) rewinding / fast forwarding a cassette from Stop, or picture search backwards / forwards from playback mode. playback start The video’s menu system gives you easy-to- understand access to the less used functions such as tuning to stations, clock setting and more. C O N T R O L S * * Though the ”16:9 Set” is displayed on the screen, this function is not available for this set. front input sockets for connecting a camcorder 2x MENU PR DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 3

Fitting the remote control's batteries 4 Place your video N horizontally on a flat, steady base so that air can circulate around it for ventilation. N away from humidity and heat, magnetic fields, such as those from loudspeakers etc., and with no heavy objects placed on top. Switch off all components when connecting or disconnecting cables. N Unplug the aerial cable from your TV and plug it into the "ANT. IN" socket of the video. Plug the short coaxial cable provided into the "ANT.OUT" socket of the video and the aerial socket of the TV. N Plug a RCA cable into the "RCA” socket of the video and the AV socket on the TV if available. This connection will provide best picture and sound quality. Ask your dealer for an appropriate cable if you do not have one. Without a RCA cable, you need to follow the steps described under "If you are not using a RCA cable" (right page and page 17). N Make sure the rating of the household mains supply matches the rating shown on the back of the video. Now plug in the mains lead. The display of the video should now light. Fit the batteries as shown by the pictures in the bay. 1.5 V (AAA) AC 240 V , 50 Hz N Protect your environment by returning used batteries to your dealer. Since batteries contain toxic substances they require special disposal methods. N Make sure the batteries are always of the same type and age, and remove them from the remote control if you are not using it for a long period. The buttons to use are marked on the following pages. TV/VCR PR PR MENU EJECT PAL/SEC A.SEL AV SP/LP INDEX 1 2 3 4 5 6 7 8 9 0 30 A I n s t a l l i n g y o u r VIDEO RECORDER + – + – DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 4

N Switch the TV on. N You can also start "Auto Search" in the menu "PR Preset" "Auto Search". N To tune in new stations (manual tuning) and to enter station names see page 14-16. You should see this picture the first time you switch on the TV and video. Choose your language. OK for "Auto Search!". "AUTO SEARCH" tunes in all the stations you can receive in your country and ... ... sorts them in an order common for your country. Should you wish the stations to have the same numbers as those used on the TV, follow the instructions in "Sorting programme locations" on page 16. Else ... exit the basic installation function and enjoy your video recorder. N If you don´t see this picture, because you don´t use a RCA cable, search this picture now (CH 26) with the station tuning functions of your TV set (see its user manual). N In case of interference problems on CH 26, type in an other transmission channel between 21 and 69 using the number buttons. 5 LANGUAGE SET English Deutsch Italiano Español Français Nederlands PYCCK SVENSKA PR+/-:select OK:confirm MENU:end Auto Search! OK:confirm MENU:end AUTO SEARCH MENU:end PR03 V-L - - - - - - - - - - - - - - 76% Please wait... MANUAL SET PR01 P-01 PR08 P-08 PR02 P-02 PR09 P-09 PR03 P-03 PR10 P-10 PR04 P-04 PR11 P-11 PR05 P-05 PR12 ---- PR06 P-06 PR13 ---- PR07 P-07 PR14 ---- PR+/-:select OK:confirm MENU:end AUTO SEARCH I n s t a l l i n g y o u r VIDEO RECORDER Then type in the current time and date. CLOCK SET 0-9:setup(hour) / :correct MENU:end Time - - : - - Date - - / - - / - - - - PR MENU 1 2 3 4 5 6 7 8 9 0 DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 5

N To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio/Video) button. Load the cassette by pushing it smoothly and squarely into the cassette bay, with its windows pointing up. Start playback. Stop playback. Eject the cassette. Fast forward or rewind the cassette from stop. N When you load a protected cassette (e.g. pre-recorded film, see page 13) playback starts automatically. N PLAY switches back to normal playback. N During still, slow or search, you don’t hear the sound. N If the still picture is jittering, you can steady it by using the PR +/– buttons. N You can reduce horizontal interference stripes resulting from inaccurate tracking (when playing tapes of poor quality or recorded on other machines) by using the PR +/– buttons during playback. N After approx. 5 minutes in still, the cassette plays back automatically. N NTSC PLAYBACK on PAL TV ; If you playback the tapes, which have been recorded on NTSC color system, on this VCR, you can watch the pictures on a PAL TV. N Clock / Counter / Remaining time – page 12. N Auto Head Cleaning This VCR has Auto Head Cleaner. The video head will be cleaned automatically whenever loading or unloading the tape. TV/VCR PR PR MENU EJECT PAL/SEC A.SEL AV SP/LP INDEX 1 2 3 4 5 6 7 8 9 0 30 A 6 AUTO SET 20 : 10 VHS VCR VCR VCR VCR VCR P L A Y I N G your video recorder EJECT DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 6

Variable slow motion Accessing new recordings (index scan) Still picture from playback. Each press of the button advances the picture one frame. “PLAY” blinks during still. PLAY switches back to normal playback. Starting from playback you can control search speed in 2 steps either forwards ( ) or backwards ( ). Press repeatedly. PLAY switches back to normal playback. Starting from playback you can control slow motion speed in 6 steps (1/15, 1/10, 1/5, 1/30, 1/25, 1/20, 1/15, ...). Press repeatedly. PLAY switches back to normal playback. Select INDEX + or INDEX – to search forwards or backwards. The video will now wind to the beginning of the first recording, play it for about 6 seconds then wind on to the next one. When you see the recording you want, press PLAY. Access the beginning of recordings in the middle of the tape using the Index + / – function. The video recorder automatically sets an electronic marker (index) at the beginning of each recording. It is these markers which the Index + / – function detects. 7 FF SP INDEX 01 0:11:09 VCR VCR + VCR - VCR P L A Y I N G c a s s e t t e s CM Skip If you press [CM Skip] button on the remote control, tape advances for 30 seconds segment. 30 INDEX DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 7

N The video is switched on. N You can either watch the picture from the video on the TV by pressing the station button reserved for video input or the AV button, watch another TV station or switch off the TV altogether. Load a cassette with its safety tab in place (see page 13). Start your recording. If you wish to interrupt recording briefly - then continue. “REC” blinks during this period. Stop your recording. Choose the station whose programme you want to record. If the programme you wish to record is very long, double the possible recording time with "LP" (Long Play). Up to eight hours with an E-240 cassette. TV/VCR PR PR MENU EJECT PAL/SEC A.SEL AV SP/LP INDEX 1 2 3 4 5 6 7 8 9 0 30 A 8 VCR STOP SP PR09 EURO N The video stops automatically, if pause exceeds five minutes. VCR VCR R E C O R D I N G c a s s e t t e s PR SP/LP PR DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 8

N For timer recordings, clock, date, and stations must be set correctly. N Load a cassette with its safety tab in place (see page 13) and with sufficient free space for the recording. N If you want to record from a source connected to your video see page 18. N To cancel OTR press the button (stop) more than 5 seconds. N Clock / Counter / Remaining time – page 12. 9 Choose the station you want and press the button once for every 30 minutes of programme you wish to record. Up to ten hours are possible. VCR TMR R E C O R D I N G c a s s e t t e s DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 9

N For timer recordings, clock, date, and stations must be set correctly. N Load a cassette with its safety tab in place (see page 13) and with sufficient free space for the recording. Call the video’s "MAIN MENU", choose "Timer Program". Decide if you want to record "Once", "Weekly" or "Daily"... ... and confirm. If you wish to make changes: Move to the position you want to change using the / buttons. Change the setting using the PR+/- or number buttons. If all setting are ok, press or , till you see “OK : confirm” in the bottom line. Confirm. Switch your video off. Type in one after the other: N The programme location number; N the time the broadcast starts, N the time the broadcast ends, N the day of the broadcast, if it is not today. N Select LP if you wish to make a very long recording . N Wait a few seconds after typing a one-digit-number. N If you have made a mistake, move to the position you want to change using the / buttons and change the setting. N If programme timings overlap, the machine will give a warning message. If you don’t adjust the times, the machine will record the first programme completely then continue with the second one. N If there is no sufficient free space for the recording on the cassette the video switches automatically to “LP” for double recording capacity. N The recorder will eject cassettes which have the safety tab removed (page13). 10 How often do you want to record this program? Once Weekly(Once a Week) Daily(Mon-Fri) Daily(Mon-Sat) Daily(Mon-Sun) PR+/-:select OK:confirm MENU:end PR+/-:select(AV) 0-9 :setup(PR) / :correct MENU:end PR -- Start Time --:-- End Time --:-- Start Date --/-- Tape Speed SP TIMER PROGRAM (Once) PR 01 Start Time 18:30 End Time 20:20 Start Date 14/04(SAT) Tape Speed LP / :correct OK:confirm MENU:end TMR TIMER PROGRAM (Once) M O R E f u n c t i o n s TV/VCR PR PR MENU EJECT PAL/SEC A.SEL AV SP/LP INDEX 1 2 3 4 5 6 7 8 9 0 30 A 2x MENU 1 2 3 4 5 6 7 8 9 0 PR DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 10

Call the video’s "MAIN MENU", choose "Timer Program". Select the programming to change or erase. If you want to erase this programming press button 0, confirm with OK. If you wish to make changes: Move to the position you want to change using the / buttons. Change the settings using the PR +/– or number buttons. If all setting are ok, press or , till you see "OK: confirm" in the bottom line. Confirm changes with OK. Exit the menus. 11 TIMER PROGRAM PR START END DATE 03 21:20 22:20 12/04 01 18:30 20:20 14/04 -- -- : -- -- : -- -- / -- -- -- : -- -- : -- -- / -- -- -- : -- -- : -- -- / -- -- -- : -- -- : -- -- / -- -- -- : -- -- : -- -- / -- -- -- : -- -- : -- -- / -- PR+/-:select OK:confirm MENU:end TIMER PROGRAM (Once) PR 03 Start Time 21:20 End Time 22:20 Start Date 12/04(THU) Tape Speed SP 0 :erase / :correct MENU:end M O R E f u n c t i o n s Setting time and date Call the video’s "MAIN MENU", choose "VCR Setup", then "Clock Set". Move to the position you want to change and type in the new values. Wait a few seconds after typing a one-digit number. Store with OK button and exit with MENU button. CLOCK SET 0-9:setup(hour) / :correct MENU:end Time - - : - - Date - - / - - / - - - - CLOCK SET 0-9:setup(hour) / :correct OK:confirm MENU:end Time 06:05 Date 12/04/2001(THU) MENU PR PR MENU 1 2 3 4 5 6 7 8 9 0 2x 2x MENU MENU 1 2 3 4 5 6 7 8 9 0 PR DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 11

Remaining time and cassette length Resetting the counter to zero Accessing counter zero position N The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The counter does not count unrecorded parts of the tape. N If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15). 12 STOP SP PR01 ARD 14:00 12/04 1x: Time and date+current status Time and date 2x: Counter+current status counter 3x: disappear If didn’t wind tape (PLAY, FF, REW,...), it doesn’t appear the tape remain time. Reset the counter. The video will wind to the position 0:00:00 and stop. When you want the video to show the time remaining from the current video tape position (to find out if there is sufficient space for a recording, for example). To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting this function until you reach the correct length. Remaining time display is only possible when the cassette is loaded. COUNTER RESET 0:00:00 REW SP GO TO ZERO 0:02:13 TAPE CONTROL TAPE REMAIN E-240 01:27 Tape Remain Go To Zero Counter Reset E-180 E-240 E-300 PR+/-:select OK:confirm MENU:end PR+/-:select OK:confirm MENU:end Call the video’s “MAIN MENU”, choose “Tape Control”. M O R E f u n c t i o n s TV/VCR PR PR MENU EJECT PAL/SEC A.SEL AV SP/LP INDEX 1 2 3 4 5 6 7 8 9 0 30 A DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 12

13 Menu languages Child lock and ... Cassettes Call the video’s "MAIN MENU", choose "VCR Setup", then "Language Set". Select your language. Confirm. Press the button for about 5 seconds. Your video can´t be operated now, only timer recordings will be performed. Keep your remote control in a safe place. To release child lock, press the button again for 5 seconds. Dimmer Your video recorder dims its display when switched to stand-by mode. Auto power off Your video recorder switches to stand-by when no tape is played and no station is received for more than 5 minutes. Use only good quality tape cassettes with the VHS logo. N Keep cassettes away from excessive moisture or dust, magnetic and electrical fields (loudspeakers and computer monitors, for example). N Always wind the tape to the beginning when you have finished. Store with the full spool at the bottom and with the cassette in its cover. You can protect your precious recordings from being wiped by breaking out the safety tab on the side of the cassette (some cassettes have a slide). Should you wish to re-use the tape after removing the tab, cover the hole with adhesive tape. PAL LANGUAGE SET English Deutsch Italiano Español Français Nederlands PYCCK SVENSKA PR+/-:select OK:confirm MENU:end 2x MENU PR PR DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 13

N To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio / Video) button. N "AV" should not be selected with the AV button on the video. TV/VCR PR PR MENU EJECT PAL/SEC A.SEL AV SP/LP INDEX 1 2 3 4 5 6 7 8 9 0 30 A 14 Call the video’s "MAIN MENU", choose "PR Preset". Select "Manual Set". Choose any unused location number "----" or "P-xx" ... It's simplest to use the same location number on both the TV and video. ... and confirm. Tune in the station you want. Press button to see the picture. If it isn’t the station you want, or the picture is disturbed, carry on tuning. Once you see the station you want, store it. Tune in further stations (from step 3 onwards) or exit tuning mode. PR PRESET Auto Search Manual Set PR Erase PR Align PR+/-:select OK:confirm MENU:end MANUAL SET PR29 P-29 PR+/-:search up/down : name correct : PR view OK:confirm MENU:end MANUAL SET PR+/-:search up/down MENU :end PR29 V-L ----------- ----- 68% MANUAL SET PR+/-:search up/down :name correct :PR view OK:confirm MENU:end PR29 P-29 MANUAL SET PR01 P-01 PR08 P-08 PR02 P-02 PR09 P-09 PR03 P-03 PR10 P-10 PR04 P-04 PR11 P-11 PR05 P-05 PR12 ---- PR06 P-06 PR13 ---- PR07 P-07 PR14 ---- PR+/-:select OK:confirm MENU:end T u n i n g i n NEW STATIONS MENU MENU PR PR PR PR PR PR DV-K2T1DX-RB/H_(GB) 01.4.18 2:5 PM ˘ ` 14

fine tuning may improve reception. Choose the station and tune using the / buttons. Store, typing in the location number again. N Should you wish to tune in all the channels available in your region, please refer to page 5. N Should you wish to sort or clear stations, please refer to page 16. If your video is showing no station name or is showing a station name incorrectly, you can correct this. Select “ : name correct” on the “MANUAL SET” menu. Call this menu (just see the left page), if it isn't displayed. Select "name correct". Either select the name from the stored list ... MANUAL SET PR+/-:name change :name create OK:confirm MENU:end PR10 P-10 ... or you select " : name create" and enter a 4-digit name. Change the letters with the PR +/– buttons, move to the next letter with the / buttons. MANUAL SET PR+/-:select character / :select position OK:confirm MENU:end PR10 E-01 Store and exit. MANUAL SET PR+/-:select OK:confirm MENU:end MANUAL SET PR+/-:search up/down :name correct :PR view OK:confirm MENU:end PR10 P-10 PR01 P-01 PR08 P-08 PR02 P-02 PR09 P-09 PR03 P-03 PR10 E-01 PR04 P-04 PR11 P-11 PR05 P-05 PR12 ---- PR06 P-06 PR13 ---- PR07 P-07 PR14 ---- T u n i n g i n NEW STATIONS 2x PR MENU PR PR MENU MENU PR PR PR DV-K2T1DX-RB/H_(GB) 01.4.18 2:6 PM ˘ ` 15

Clearing programme locations 16 TV/VCR PR PR MENU EJECT PAL/SEC A.SEL AV SP/LP INDEX 1 2 3 4 5 6 7 8 9 0 30 A If the location numbers used for programmes stored in your TV and video are different, you can change them on the video. To do this, move the stations to the right numbers, until they are arranged the way you want. PR ERASE PR+/-:select :PR view OK:erase MENU:end Call the video’s "MAIN MENU", choose "PR Preset" then "PR Align". Call the video’s "MAIN MENU", choose "PR Preset" then "PR Erase". Select the programme to swap. Confirm. Move the station to the desired location number. Confirm. Select the station (location number) you want to clear. Review the picture. Clear. PR ALIGN PR+/-:align :PR view OK:confirm MENU:end PR01 P-01 PR08 P-08 PR02 P-02 PR09 P-09 PR03 P-03 PR10 P-10 PR04 P-04 PR11 P-11 PR05 P-05 PR12 ---- PR06 P-06 PR13 ---- PR07 P-07 PR14 ---- PR01 P-01 PR08 P-08 PR02 P-02 PR09 P-09 PR03 P-03 PR10 P-10 PR04 P-04 PR11 P-11 PR05 P-05 PR12 ---- PR06 P-06 PR13 ---- PR07 P-07 PR14 ---- PR03 P-03 IMPORTANT! The ‘OK’button will erase this PR. :PR view OK:confirm MENU:end T u n i n g i n NEW STATIONS 2x MENU PR PR PR MENU MENU PR PR MENU PR PR PR PR PR DV-K2T1DX-RB/H_(GB) 01.4.18 2:6 PM ˘ ` 16

N If you are using a RCA cable, select the AV input on the TV to see the picture from the video. N If you are not using a RCA cable, select the button number on the TV reserved for video input to see the picture from the video. 17 If you are not using a RCA cable, your video can transmit pictures and sound to the TV via the coax aerial cable. Just tune the TV to the video's transmitting channel (factory set to UHF CH 26). Tune the TV carefully to ensure the best pictures and sound. Once you have carried out the steps in "Connecting up the video recorder" (page 4), switch on your TV. Press the OK button of the video’s remote control longer than 5 seconds to call the video´s test picture. Tune the TV to the test picture using the channel pre-set functions of your TV as described in its manual. When you have found the test picture, store it under the button number on your TV for video input. Press the OK button of the video’s remote control again longer than 5 seconds to release the test picture. Call the video’s "MAIN MENU" choose "VCR Setup" then "RF Output Set". Type in the free channel. Store and exit. If the quality of the test picture transmitted to the TV is poor due to interference caused by a station transmitting on channel 26, you can tune the video to a different transmitting channel. Find a free channel between 21 and 69 on your TV. N If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV may help (refer to the TV manual). RF OUTPUT SET 0-9:setup(21-69) OK:confirm MENU:end PR 26 5 sec. CONNECTIONS a n d c o p y i n g 2x 2x MENU MENU PR PR 1 2 3 4 5 6 7 8 9 0 DV-K2T1DX-RB/H_(GB) 01.4.18 2:6 PM ˘ ` 17

For the best results, the source cassette from which you are recording should already be playing back when you start recording. 18 Should you wish to assemble your own film, from camcorder footage for example, use the assembly technique for smooth edit points: To copy to your video from another video machine, connect the two machines with a cable between their RCA sockets and select as programme "AV"using the AV button. Set the other video machine to playback and your machine to record. To copy to another video machine from your video, connect the two machines by means of their RCA sockets. On the other video, select its AV input and set the machine to record. Switch your video to play back at the position you want copying to start. N Move the tape to the position at which the new scene is to be added using the play functions (pages 6/7). N Wind back slightly before the edit point and put the machine into pause using the button (do not press STOP!). N Now go directly into record. TV (other VCR) ANT. OUT ANT. IN AUDIO VIDEO OUT IN Other VCR Decoder for Pay-TV Camcorder Video Player VCR VCR VCR CONNECTIONS a n d c o p y i n g TV/VCR PR PR MENU EJECT PAL/SEC A.SEL AV SP/LP INDEX 1 2 3 4 5 6 7 8 9 0 30 A 2x AV DV-K2T1DX-RB/H_(GB) 01.4.18 2:6 PM ˘ ` 18

N The TV stations on the video have been tuned in (page 5). N The video is switched on. N You can either watch the picture from the video on the TV by pressing the station button reserved for video input or the AV button, watch another TV station or switch off the TV altogether. N Your TV and your video recorder are switched on. N To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio/Video) button. Start playback. Stop playback. Fast forward or rewind the cassette from stop. Still picture from playback. Each press of the button advances the picture one frame. PLAY switches back to normal playback. Starting from playback you can control search speed in 2 steps either forwards ( ) or backwards ( ). Press repeatedly. PLAY switches back to normal playback. Starting from playback you can control slow motion speed in 6 steps (1/15, 1/10, 1/5, 1/30, 1/25, 1/20, 1/15, ...). Press repeatedly. PLAY switches back to normal playback. Select INDEX + or INDEX – to search forwards or backwards. The video will now wind to the beginning of the first recording, play it for about 6 seconds then wind on to the next one. When you see the recording you want, press PLAY. Load a cassette with its safety tab in place (see page 13). Start your recording. If you wish to interrupt recording briefly – then continue. Stop your recording. Choose the station whose programme you want to record. If the programme you wish to record is very long, double the possible recording time with "LP" (Long Play). Up to eight hours with an E-240 cassette. Choose the station you want and press the button once for every 30 minutes of programme you wish to record. Up to ten hours are possible. A D V A N C E I N S T R U C T I O N 19 INDEX PR SP/LP PR DV-K2T1DX-RB/H_(GB) 01.4.18 2:6 PM ˘ ` 19

N Load a cassette with safety tab in place (page 13) and with sufficient free space for the recording. Call the video’s "MAIN MENU", choose "Timer Program". Decide if you want to record "Once", "Weekly" or "Daily"... ... and confirm. If you wish to make changes: Move to the position you want to change using the / button. Change the setting using the +/- or number buttons. If all setting are ok, press or , till you see “OK:confirm” in the last line. Confirm. Switch your video off. Type in one after the other: N the programme location number, N the time the broadcast starts, N the time the broadcast ends, N the day of the broadcast, if it is not today. N select LP if you wish to make a very long recording. How often do you want to record this program? Once Weekly(Once a Week) Daily(Mon-Fri) Daily(Mon-Sat) Daily(Mon-Sun) PR+/-:select OK:confirm MENU:end PR+/-:select(AV) 0-9 :setup(PR) / :correct MENU:end PR -- Start Time --:-- End Time --:-- Start Date --/-- Tape Speed SP TIMER PROGRAM (Once) PR 01 Start Time 18:30 End Time 20:20 Start Date 14/04(SAT) Tape Speed LP / :correct OK:confirm MENU:end TMR TIMER PROGRAM (Once) 2x MENU 1 2 3 4 5 6 7 8 9 0 PR A D V A N C E I N S T R U C T I O N DV-K2T1DX-RB/H_(GB) 01.4.18 2:6 PM ˘ ` 20

Mains supply the video's display does not light the video doesn’t work Recording doesn’t start the cassette starts playback or is ejected Playback no picture poor picture quality poor still picture Remote control doesn’t work General a cassette won’t load the cassette won't rewind, fast forward, play or record mode timer is recording incorrectly a loud noise when left in Stop mode "ERR" occurs in the display - The mains lead is not connected to the wall socket. - condensation may have formed when moving the video recorder from a cold to a warm room. Wait until the video (and cassette!) reach room temperature. - Is a cassette loaded? - the safety tab may be missing. Cover the hole with adhesive tape (page 13). - -Are the TV stations tuned in on the video (page 5)? - Is there a recording on the video tape? - Use PR. –/+ buttons to adjust tracking if horizontal stripes appear. - Is the cassette of poor quality or worn out? Test with another cassette. - If you are not using a RCA cable, have you tuned the location for video input on the TV properly? pages 5/17. - Try a different cassette. The video head drum may need cleaning - ask your dealer. - Press (pause) several times. Adjust with the PR +/- buttons until you get the best picture. - are the batteries run down? - is the distance between remote control and video more than 7 meters? - is there an object blocking the direct line between remote control and video? - is there a cassette already loaded? If so, the video’s display will indicate it. - the cassette is already fully wound back or to the end. - is the clock set correctly (page 11)? - if no play or record function is used for about five minutes when left in Stop mode, the video switches its motor off to conserve the mechanism. - Your video has detected abnormal conditions. Release this mode with any button , your video then safely switches to stand-by. 21 TROUBLE SHOOTING DV-K2T1DX-RB/H_(GB) 01.4.18 2:6 PM ˘ ` 21

Assembling recordings .............................. 18 Cassette length .......................................... 12 Channel .............................................. 5/14-17 Child lock .................................................... 13 CM Skip ........................................................ 7 Condensation .............................. Precautions Counter ....................................................... 12 Fine-tuning ................................................. 15 Location number ................................ 5/14-17 LP (Long Play) .......................................... 8-10 Mains ...................................................... 4/22 Menu ............................................................ 3 OTR ............................................................... 9 Protected cassette ..................................... 13 RCA ............................................................ 17 Remaining time .......................................... 12 RF out ...................................................... 5/17 SP (Standard Play) .................................. 8-10 Stand-by ...................................... Precautions Station ................................................5/14-17 Still frame adjustment ................................. 6 Test picture .................................................17 Tracking ........................................................ 6 Dimensions W x H x D 360 x 90 x 288 mm Weight 3.85 kg Power supply Voltage AC 240 V , 50 Hz Power consumption 15 Watt System Video PAL-B/H Channel range VHF 2 - 12, UHF 21 - 69, CATV S1 - S41, x, y, z (Hyperband) Channel locations 99 + AUX RF Out UHF CH 21 - 69 (26) Video System VHS Speeds SP / LP General Temperature range 5 - 35° C Humidity range < 80 % Timer 8 events, 1 month Subject to technical alterations without notice. A P P E N D I X 22 DV-K2T1DX-RB/H_(GB) 01.4.18 2:6 PM ˘ ` 22

Video Recorder functions .......................... 2 Controls .......................................................3 Installing your Video Recorder....................4 Playing your Video Recorder.......................6 Playing cassettes ........................................7 Recording cassettes....................................8 More functions..........................................10 Tuning in New Stations.............................14 Connections & copying .............................17 Advanced Instructions...............................19 Trouble Shooting .......................................21 Specifications............................................22 If you need Service or call with a question have this information ready. We advice you to keep this users manual and your purchase slip in your possession. Model No. : ________________________ Serial No. : _________________________ Date of Purchase : __________________________ Purchase slip no. : __________________________ SAVE THESE INSTRUCTIONS Printed in Korea DV-K2T1DX-RB/H_(GB) 01.4.18 2:4 PM ˘ ` 1