Suunto Altimax Instruction Manual

altitude is set, the unit will show quite accurate readings. Second, if what you mean is how the Wristop Computer calculates the information shown in the logbook, this is what it does: for the total ascent during the log (the logbook recording has been activated by the user when starting out) it calculates the ascent from 3,000 ft to 8,000 ft, i.e. total ascent has been 5,000ft. For the descent it calculates the descent from 5,000 ft to 3,000 ft, i.e. total descent 2,000 ft. Third, if thin ...

Suunto USA Phone 1 (800) 543-9124 Suunto Canada Phone 1 (800) 776-7770 Web Site www.suuntousa.com Suunto Europe Phone +33 3 90 20 74 30 Fax +33 3 90 20 74 40 Web Site www.suuntoeurope.com Suunto Oyj Phone +358 9 8524 050 Fax +358 9 8524 0592 Web Site www.suunto.fi Congratulations, your newly purchased Wristop Computer is designed to provide years of enjoyment in whatever outdoor activities you engage. Along with this product you will find a Warranty card, this User’s Guide, and a full service support team to give you the results you need anytime, anywhere, quickly ...

1. PRESS and hold the [Select] button for 2 seconds. • Field 2 displays the event number “CH #” the user will be viewing; and • Field 3 displays the text “bEG” (begin). 2. PRESS the [+] button to view the lap and split time which is in chronological order beginning with lap 1. • Field 1 displays the seconds and tenths of seconds of the lap or split time; • Field 2 displays the hours and minutes of the lap or split time; and • Field 3 displays the text “ L #” or “SPL” (SPL = split time). The lap time will be viewed first ...

• Field 1 shows the seconds and tenths of seconds of the split time; • Field 2 shows the hours and minutes of the split time; and • Field 3 shows the starting date of the race. PRESS the [+] and [-] buttons to scroll through the split times. PRESS the [Select] button to exit and return to the main mode. Note: Only one race can be stored in the memory. As soon as the count down function is restarted, the information from the previous race will be erased from the memory. ...

1. PRESS the [Select] button and hold for 2 seconds. Located in Field 1, the seconds will begin to flash. 2. PRESS the [+] button to scroll the seconds upward or 3. PRESS the [-] button to scroll the seconds downward. 4. At the seconds desired, PRESS the [Select] button to move to the next setting. Located on right of Field 3, the minutes will begin to flash. 5. PRESS the [+] button to scroll the minutes upward or PRESS the [-] button to scroll the minutes downward. 6. At the minutes desired, PRESS the [Select] button to move to the next setting. Located in ...

THE BAROMETRIC MODE (REFER TO PAGE 37, SETTING THE SEA LEVEL PRESSURE). SETTING THE SEA LEVEL PRESSURE WILL ADJUST THE ALTIMETER TO THE CURRENT ALTITUDE WITHIN SOME TEN METERS OR FEW HUNDRED FEET. INFORMATION ON THE CURRENT SEA LEVEL PRESSURE CAN BE OBTAINED THROUGH NEWSPAPERS, LOCAL NEWS AND RADIO WEATHER REPORTS, THE LOCAL AIRPORT FACILITY OR THROUGH THE INTERNET UNDER LOCAL WEATHER. Setting the Altimeter In setting the Altimeter, there are three processes that can be performed: • the Reference Altitude (known altit ...

The watch function provides the user with: • an adjustable 24/12 hour clock display; • a calendar pre-programmed to the year 2089; and • three sub modes: three daily alarms, stopwatch and countdown timer. To view and use the Time mode function: Check the Mode Indicator Bar. If the mode arrow is not on TIME, PRESS the [Mode] button until the arrow is directly below TIME on the bar. In the TIME mode: • Field 1 displays the day of the week. • Field 2 displays the current time. • Field 3 displays ...