Swann Wireless Outdoor Cameras & Receiver Installation Manual
Text of the manual
Night Hawk Camera Pack
2 Wireless Outdoor Cameras
& Receiver
Installation Guide
English
If this device does not work when you first plug it in,
do not take it back to the store.
Note: Wireless Networks (WiFi) may interfere with and/or experience interference caused by the transmitter
in this unit. Changing the receiver to another channel/frequency or setting
Your Night Hawk Camera Pack comes with
Setting up your system
Camera Features
Receiver Features
Changing the channel on the Night Hawk Camera
Important Information about this product
Troubleshooting, Hints & Tips
Warranty Information
Technical Specifications
Help Desk / Support Details
2
2
3
4
4
5
5
6
7
7
Back Cover
2
2
3
4
4
5
5
6
7
7
Back Cove
The Camera features an omni-directional antenna which is most effective when used in the
UPRIGHT position.
1)
2)
How to lock out un-used channels on the 4 channel receiver.
Connect both the Camera and the Receiver to their respective power adaptors.
*IMPORTANT: The camera requires an 8- 9V power supply, the receiver uses a 12V power
supply.*
Connect the Rece
1. Directional Antenna
2. Channel Selector Button
4. DC Power jack
5.
6. Audio Out (L) jack
7.
3. IR Remote Receiver window and
Channel Display.
Video Out jack
Audio Out (R) jack
8. IR Remote Control
9. ON/OFF Switch
1. Omni-directional Antenna
3
5.
2. Infra-red LEDs
. Detachable Camera Stand
4. Microphone (enclosed in socket)
Power Cable & DC Power Socket
2
