Swisher PBB-7530 Assembly Instructions
Text of the manual
330 Outlander 04
400 Outlander Max 04
400 Outlander 4X4 03-05
May fit additional models see Master List
Front
Caution: Do not exceed 5 MPH with the blade or it’s brackets installed
Remove the mount plate for trail riding where extra ground clearance is needed
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
12990 Rev 06-312
Partial Frame View
Front Strap Plate
10324TK
3
Carriage Bolt
NB517
4
Nylock Nut 5/16-18
NB181
5
Hair Pin #39
NB127
6
Clevis Pin
10305
7
Bolt M8-1.25 X 25
NB723
8
Nut M8-1.25
NB718
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1.
Place the mount plate up against the bottom of the frame. The Blade Mounting Tabs should be
pointing down and located toward the front of the ATV.
2.
Align the rear holes with the holes in the frame. Install the M8 Bolts and Nuts, just snug.
3.
Install Carriage bolts into plate (Item2) and place on top of the frame aligning with the holes in the
front of the plate. Snug up with Nuts (Item 4)
4.
Center plate under the bike and tighten the bolts securely
1
2
3
4
5
6
8
7
