A4Tech GL-6630 Operation & User’s Manual
Text of the manual
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Federal Communications Commission Requirements
The equipment has been tested and foun
A. Illustration of the main menu
B. How to Pair the X-Far Wireless Devices
The keyboard and mouse have been preset the ID Code in the factory. But under the circumstances you lose receiver or want to
use with the other receiver in the same product series, you need to refresh the ID Code before using it.
Step 1: Right click on the icon
i
Step 3: Remove the mouse batteries or keyboard batteries and insert again in 15 seconds, 6 digits of matching code will be displayed on
the menu as shown “Mouse Pair ID OK” or “Keyboard Pair ID OK“.
C. How to Indicate Battery Status
All of G7 series have Battery Status Indicator in the software, click “
”in the main menu
of the software, then the
E. DPI Setting
There are 4 DPI levels are provided to satisfy your needs for works and games.
Step 1: Right click on the icon
in the taskbar
and select “DPI Set”
Step 2: Choose the desired DPI from below popped window.
F. Set RF Channel to Avoid Wireless Interference
In case there are many wireless mice working in the adjacent area, you may set a specifi
