Fender Squier Sidekick Troubleshooting Manual
Text of the manual
SQUIER® PACK TROUBLESHOOTING GUIDE
No sound from the instrument or amplifier.
1. Is the instrument cable plugged into both the guitar
and amplifier properly?
2. Is the amplifier power cord properly plugged into
an electrical outlet?
3. Is there power at the electrical outlet?
4. Is the amplifier turned on?
5. Is the volume control of the instrument turned up?
6. Are the control knobs of the amplifier turned up?
Try using a different cable. If the instrument and amplifier are
set up correctly with a good cable and there is still no sound,
return the product to your Dealer for assistance.
No input to the Tuner.
1. Is the guitar cable plugged into both the guitar and
tuner properly?
2. Is the volume control of the instrument turned up?
3. Have you checked the tuner battery to make sure
it still carries a charge?
4. Is the power clip attached properly to the battery?
Try using a different cable or replace the battery. If the
instrument and tuner are connected correctly with a good
cable and a fresh battery, and there is still no input to the
tuner, return the product to your Dealer for assistance.
The strings seem either too high off of the fingerboard,
or too close to it.
For either condition, review the Setup Guide for information on
adjusting the neck of your instrument. Perform either a
truss rod adjustment or saddle height adjustment if necessary.
If you are not comfortable performing any of these
adjustments to your instrument, take it to an Authorized
Fender® Service Center for a “setup.”
NOTE: Setups and adjustments are considered to be routine
maintenance, and as such, are not covered under warranty.
Broken String.
Visit your local Fender Dealer to purchase replacement strings.
If you need detailed information or assistance with restringing
your guitar, ask your Dealer or visit the Setup page of our
Mr. Gearhead product support website at www.mrgearhead.com.
SQUIER® PACK SETUP GUIDE
The following specifications are for guitars/basses using
the standard gauges of Fender® strings that the instrument
is equipped with from the factory. Adjustments in these
specifications will need to be made if you plan to change
string gauges. Modifications of the specifications can also be
made (within limited parameters) to adjust for your individual
playing style or application, (i.e. how hard you pick, strum or
fret the guitar or bass).
If you are not comfortable performing these adjustments to
your instrument, take it to an Authorized Fender Service
Center for a “setup”.
Note: Setups and adjustments are not covered under warranty.
Setup and Adjustment Made Easy
Weather, specifically temperature and humidity, may have
a dramatic impact on the way your instrument plays. All
instrument woods expand and contract with seasonal
fluctuations in temperature and humidity, and naturally,
string height and playing action are affected. Depending
on the climate where you live, your instrument may need
routine adjustments a few times a year.
Fender/Squier instruments have several points of adjustment
which are there to control the effects of these environmental
changes, and more importantly, these features allow you to
tailor the action of the instrument to your own personal
playing style.
Note: The following factory specifications are minimum specs,
and are meant only to guide you. They should not to be taken
as hard and fast rules. If you want your action higher, set it higher!