Beam iridium SatDOCK 9555 Installation & User Manual

The following icons will appear in your display to provide you with various information about the phones activity. MAIN SCREEN COMPONENTS IRIDIUM 9555 DISPLAY DEFINITIONS MENU COMPONENTS ...

consistent, reliable, quality voice and data access all day every day. The Iridium satellite system is monitored for call performance from numerous locations 24 hours a day, 7 days a week in order to achieve this. There are conditions that can compromise the quality of the service you may receive. These include: Obstructions »» Cabling »» RF Interference »» 1. Obstructions The antenna must be able to “see” the entire sky from approximately 8 degrees above the horizon. Nearby tall buildi ...

COMMUNICATION PORT An RS232 serial data port is available via the “Comm Port” allowing data calls, or tracking / alerting modules or a PC to be connected. The DB9 Comm Port enables data devices to be connected to the Hands-free Interface unit. To connect your PC/Laptop to the Comm port on the Hands-free Interface Unit use the following communication settings: Baud Rate: 19200 bps (Does not auto-baud) Data bits: 8 Parity: None Stop Bits: 1 Flow Control: Hardware Setting the Baud Rate If you wish to access the serial port at a different baud rate please issue the following AT ...

Q You can’t make international calls A Have you included the relevant codes? Press and hold the (+) key to display the international dialling prefix (+), and then enter the appropriate country code, followed by the phone number. Q Your PIN2 is locked A Enter the PIN2 unblocking key (PUK2) or contact your service provider. Q You can’t cancel call forwarding or call barring A Wait until you are in an area with good network coverage and try again Q Your SIM card won’t work A Is the card inserted the correct way? Is the gold chip visibly damaged or scr ...

Contents Safety Information 6 About Beam Communications 11 About this Equipment 12 SATDOCK 9555 FEATURES 12 Installation Guidelines 14 EQUIPMENT OVERVIEW 15 UNPACKING & TESTING 17 INSTALLATION PROCEDURE 18 INSTALLING THE SATDOCK CRADLE 18 SATDOCK INSTALLATION STEPS 19 INSTALLING HANDSFREE INTERFACE UNIT (HFI) 19 ANTENNA CONNECTION 21 INSTALLING THE DIRECTIONAL MICROPHONE 22 INSTALLING THE SPEAKER 23 CHECKING PERFORMANCE AFTER INSTALLATION 23 SatDOCK 9555 Usage 25 OPERATION OF THE SATDOCK 26 REMOVING THE 9555 FROM VEHICLE 26 CHARGING THE IRIDIUM 9555 HAND ...

To dock the 9555 handset place the base of the 9555 handset 1. into the seat if the SatDOCK ensuring that the pins on the bottom of the 9555 handset line up with that on the seat of the Sat DOCK cradle as illustrated below. Push the top face of the handset to seat the handset base firmly 2. into the SatDOCK cradle until the handset clicks and locks into place at the top of phone. Gently pull on the handset to confirm that it is docked correctly and won’t come loose. When removing the 9555 handset from the SatDOCK cradle, 3. reverse the above steps, ens ...