Karcher DE 4002 Operating Instructions Manual

www.kaercher.com DE 4002 59648080 11/12 Deutsch 3 English 13 Français 23 Italiano 34 Nederlands 45 Español 56 Português 67 Dansk 78 Norsk 88 Svenska 98 Suomi 108 Ελληνικά 119 Türkçe 130 Русский 140 Magyar 152 Čeština 163 Slovenščina 174 Polski 185 Româneşte 196 Slovenčina 207 Hrvatski 218 Srpski 228 Български 239

these original instructions prior to the initial operation of your appliance and store them for later use or subsequent own- ers. – Before first start-up it is definitely nec- essary to read the safety indications Nr. 5.956-345! – The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dan- gers for the operator and other persons. – In case of transport damage inform ven- dor immediately The packaging material can be recy- cled. Please do not place the packag- ing into the ordinary refuse for disposal, but arrange for the proper recycling. Old appliances contain valuable mate- rials that can be recycled. Please ar- range for the proper recycling of old appliances. Please dispose your old appli- ances using appropriate collection systems. Notes about the ingredients (REACH) You will find current information about the ingredients at: www.kaercher.com/REACH  Danger Immediate danger that can cause severe injury or even death.  Warning Possible hazardous situation that could lead to severe injury or even death. Caution Possible hazardous situation that could lead to mild injury to persons or damage to property. Steam CAUTION - Danger of scalding – The machine is designed for generating steam and vacuum cleaning liquids and solid substances according to the de- scription in this Operating Instructions Manual. – This appliance is suitable for commer- cial use. Safety devices serve for the protection of the user and must not be put out of opera- tion or bypassed with respect to their func- tion. The pressure controller keeps the boiler pressure during the operation as constant as possible. The heating is turned off if the maximum operating pressure of 4 bar is reached in the boiler and is reactivated in case of a pressure drop in the boiler due to steam tapping. Contents Contents. . . . . . . . . . . . . . . EN . . .1 Environmental protection . . EN . . .1 Safety instructions . . . . . . . EN . . .1 Notes on the operation. . . . EN . . .2 Device elements. . . . . . . . . EN . . .3 Start up. . . . . . . . . . . . . . . . EN . . .4 Operation . . . . . . . . . . . . . . EN . . .4 How to Use the Accessories EN . . .6 Transport . . . . . . . . . . . . . . EN . . .7 Storing the device . . . . . . . EN . . .7 Maintenance and care . . . . EN . . .8 Troubleshooting . . . . . . . . . EN . . .8 Warranty. . . . . . . . . . . . . . . EN . . .9 Accessories and Spare Parts EN . . .9 EC Declaration of Conformity EN . . .9 Technical specifications . . . EN . .10 Environmental protection Safety instructions Symbols in the operating instructions Symbols on the machine Proper use Safety Devices Pressure controller 13 EN

hausted, the temperature of the heating in- creases. The low-water thermostat turns off the heating, and the red low-water indicator lamp "water shortage" lights up. The heat- ing is prevented from being turned on again until the boiler has cooled down or been re- filled with water. If the low-water thermostat fails and the ap- pliance overheats, the safety thermostat turns off the steam cleaner. Please contact your local KÄRCHER cus- tomer service to arrange for the reset of the safety thermostat. The safety lock seals the boiler against the steam pressure that builds up in the boiler. If the pressure controller is defective and the steam pressure in the boiler rises above 5.7 bar, a pressure control valve in the safety lock opens, and steam is emitted through the lock to the outside. Please contact your local KÄRCHER cus- tomer service before you put the appliance into operation again. Prior to treatment with the steam cleaner, always check the reaction of the textiles in an inconspicuous location: Steam at first, then let dry and then check for colour or shape changes. When cleaning painted or plastic-coated surfaces, as found on kitchen and living room furniture, doors, parquet; wax, furni- ture polish, plastic surfaces or paint can come loose or stains can be created. When cleaning these surfaces, briefly steam a cloth and wipe the surfaces with it. In case of low outside temperatures, espe- cially in the winter, warm up the window pane by slightly steaming the entire glass surface. This will prevent tensions on the surface which might lead to glass break- age. Water shortage thermostat Safety thermostat Safety lock Notes on the operation Refreshing textiles Cleaning of Coated or Lacquered Surfaces Cleaning of Glass 14 EN

3 Unlocking button 4 Lock (child-proof lock) 5 Steam switch 6 Steam plug 7 Reset key - Descaling 8 Rotary knob for VAPOHYDRO regulation 9 Temperature display 10 Rotary knob for steam quantity controller 11 Indicator lamp - Descaling (white) 12 Indicator lamp "water shortage addi- tional tank" (red) 13 Indicator lamp - heating (yellow) 14 Switch - heating (ON/OFF) 15 Switch - steam supply Device elements 15 EN

boiler (red) 17 Safety lock 18 Container closure 19 Funnel inlet 20 Extension tubes (two tubes) 21 Detail nozzle (180 mm) 22 Round brush 23 Extension piece 24 Power nozzle (red) 25 Hand nozzle 26 Terry cloth cover 27 Window nozzle (option) 28 Floor nozzle 29 Terry floor cloth 30 Iron (option) 31 Temperature controller 32 Switch - steam ironing 33 Indicator lamp - steam iron heating 34 Support of extension pipe 35 Floor nozzle holder 36 Detail nozzle (120 mm) Tightly insert the steam plug into the ap- pliance. The pins of the plug must lock into the cover of the appliance connec- tor. Connect the required accessories (floor nozzle, hand nozzle or detail nozzle) to the steam gun. Slide the parts together until the locking button locks into the steam gun. Use the extension pipes if necessary. Slide the parts together until the respec- tive locking button locks into place. Press down on the locking knob to sep- arate the accessories. Remove the safety cap from the device. Fill the boiler with a maximum of 2 liters of fresh tap water using the filling fun- nel. You can cut down the heating-up time by using warm water. Note The boiler can be filled up to 2 cm below the edge of the filler neck if the appliance is in horizontal position.  Warning Do not use detergent. Screw the safety cap back onto the de- vice. The additional tank can be filled if the work will last for an extended period of time. Unscrew the container lid from the addi- tional tank. Fill the additional tank with a maximum of 2 liters of fresh tap water using the fill- ing funnel. Screw the container lid onto the addi- tional tank. The temperature display shows whether the operation is taking place in the correct temperature range (green range). Insert the mains plug into the socket. Switch on the appliance by means of the switch for steam supply and the heating switch. The indicator lamps illu- minate. Note The full heating performance is only availa- ble if the steam plug is connected to the ap- pliance during the heating-up period. Once the indicator lamp "heating" has gone out, the system is ready for use. Start up Attaching the Accessories Fill up with water Additional tank Operation Temperature display Turning on the Appliance 16 EN

position while it is running. Otherwise, the heating will turn off automatically after a brief period and the indicator lamp "water shortage" will illuminate in red. Switch the heating off by means of the switch while the appliance is being transported. Actuate the steam switch, steam will es- cape. Always direct the steam gun at a separate piece of cloth until the steam is emitted evenly. – The heating of the steam cleaner is turned on during operation of the appli- ance (indicator lamp glows yellow) in order to maintain the pressure in the boiler at a constant level. – If the device is switched on without wa- ter, initially, the indicator lamp "heating" will glow yellow until the water shortage thermostat switches the heating off. Af- ter that, the indicator lamp "water short- age" glows red. Regulate the steam volume during work with standard accessories or with the iron via the rotary knob on the appli- ance. Regulate the steam volume during work with standard accessories via the hand- wheel on the steam gun. The rotary knob on the appliance becomes inac- tive. Note If the handwheel is set to a small quantity of steam, steam may continue to be emitted after the steam switch has been released until the pressure in the steam hose has been reduced. This pressure can be re- lieved even faster by briefly setting the steam value regulation to a large volume. – In wet areas, you can also wash away the dirt instead of absorbing it with the cloth. For this, set the moisture of the steam to regulate via VAPOHYDRO regulation by means of the rotary knob. The higher the humidity of the steam, i.e. the more water is contained in the steam jet, the higher the rinsing effect. If you turn the rotary knob toward “+” steam quantity, a hot water jet is emerged, and the highest rinsing effect is achieved. – We recommend using the VAPOHY- DRO in connection with the detail noz- zle for cleaning the bathroom. – VAPOHYDRO regulation when working with cloths (floor nozzle, hand nozzle) with the rotary knob all the way to "–" in order to have as little moisture in the steam jet as possible. The dirt loosen- ing power of the steam is improved this way. Note If you turn the rotary knob for the VAPOHY- DRO regulation to "+", the boiler is emptied more quickly. Note Once the water in the additional tank is used up, there will be a signal emitted and the indicator lamp for "water shortage in ad- ditional tank" illuminates red. Fill the additional tank with a maximum of 2 liters of fresh tap water using the fill- ing funnel. Once the indicator lamp "heating" has gone out, the system is ready for use. Note If the pump does not produce any water in spite of the full additional tank, the boiler must be descaled. steam quantity controller via rotary knob on the appliance Steam quantity controller via handwheel on the steam gun VAPOHYDRO regulation with rotary knob Refilling Water 17 EN

parts while you are detaching them! Never detach accessory parts while steam streams out - risk of scalding! Switch the appliance off at the switches. Lift the cover of the appliance connector and disconnect the steam plug from the appliance. Disconnect the mains plug from the socket. Note You can leave the residual water in the ap- pliance. Application examples for use of the steam gun without accessories: – to remove odours and wrinkles from hanging clothes by steaming them at a distance of 10 to 20 cm. – to remove dust from plants. Here, keep a distance of 20-40 cm. – for moist dusting, by briefly steaming the cloth and wiping the furniture with it. – The closer you hold the nozzle to the dirty spot, the higher the cleaning effect as temperature and pressure of the steam reach their maximum values im- mediately when they are emitted from the nozzle. – The detail nozzle with the different at- tachment is suited for cleaning difficult to access points, such as corners, grooves, etc. as well as blinds, central heaters, toilets, stainless steel, mirrors, mirrors, fixtures, coated and enameled surfaces, loosening of stains. – The power nozzle increases the emis- sion speed of the steam. Therefore, it is well-suited for cleaning very tough dirt, blowing out corners, grooves, etc. Note The round brush is not suited for the clean- ing of delicate surfaces. – Suited for all washable wall and floor coverings, e.g. stone floors, tiles and PVC floors. Work slowly on very dirty surfaces to allow the steam to act on the dirt for a longer period of time. – Flip and replace floor cloth regularly to improve the dirt pickup. Note Detergent residue or care emulsions that are still present on the surfaces to be cleaned, can lead to smears when steam cleaned. However, these will disappear with repeated cleaning procedures. Attach the floor cloth to the floor nozzle. 1 Fold the floor cloth the long way and place the floor nozzle on top of it. 2 Open holding clamps. 3 Place the cloth ends into the openings. 4 Close the holding clamps.  Warning Do not insert fingers between the clamps. Suited for small washable areas, shower stalls, mirrors or furniture cloth material. Pull the terry cloth cover over the man- ual nozzle. Order no. 6.959-262.0 Connect the steam plug of the iron to the appliance. VAPOHYDRO regulation with rotary knob, turn all the way to "-". Set the temperature controller at least to 3 for ironing all types of fabrics. The emitted steam prevents the fabric from becoming overheated. Once the indicator lamp on the iron has gone out, the system is ready for use. Removing the Accessories Turning Off the Appliance How to Use the Accessories Steam gun Detail nozzle Floor nozzle Hand nozzle Iron (option) Steam ironing 18 EN

er and more invisible the steam; however, the steam volume remains the same. – Push the switch for steam ironing to the front: Steam will escape continuously. – Push the switch for steam ironing to the rear: Steam push emitted. First, direct the steam gun at a separate piece of cloth until no more water is emitted. Set the steam quantity controller on the ap- pliance to the desired quantity of steam. You can hold the iron in an upright position to apply steam to curtains, dresses, etc. Ironing without steam: Switch on the appliance and switch off the the heating switch. Set the temperature controller on the iron to the desired fabric. Order no. 4.130-145.0 Apply steam to the glass surface from a distance of approximately 20 cm until the surface is moistened evenly. Switch off the steam supply. Strip the glass surface in straight lines from the top to the bottom using the rub- ber lip. Wipe the rubber lip and the bottom edge of the window dry after each strip. Order no. 2.863-076.0 You can use the wallpaper remover with the steam cleaner to remove wallpapers. Apply wallpaper remover to the edge of a wallpaper length and let the steam settle in until the wallpaper is fully mois- tened (approx. 10 seconds). Reset wallpaper remover without switching off. Lift the soaked piece of wallpaper using a flat trowel, and pull it off the wall. In case of woodchip wallpaper that has been painted several times, the steam may not be able to soak the wallpaper. If this happens, you need to prepare accordingly with a nail roller. Caution Risk of injury and damage! Observe the weight of the appliance when you transport it. When working with extension pipes and the floor nozzle the appliance can be transport- ed easily, e.g. up and down steps. Switch off the heating at the switch. Place the appliance vertically. Hook the extension pipe with the holder to the bottom side of the appliance. Caution Risk of injury and damage! Note the weight of the appliance in case of storage. This appliance must only be stored in inte- rior rooms. Place the manual nozzle, detail nozzles and small parts into the accessories storage box. Wrap the cable around the holder on the floor of the appliance. Insert the ex- tension pipes individually into the re- cesses on the appliance floor. Note Always allow the brushes to cool down for a sufficient period of time to avoid a defor- mation of the bristles. Dry ironing Man-made fi- bre Wool Linen Window nozzle (option) Wallpaper remover (optional) Transport Transporting the device Storing the device Storing the Appliance 19 EN

low the steam cleaner to cool down before performing any maintenance work. Rinse the boiler of the steam cleaner boiler at the latest after 5 boiler fillings. Fill the boiler with water and shake it strongly. This dissolves lime scaling re- siding on the boiler bottom. Empty water out. Note If you always use usual commercial distilled water it is not necessary to descale the boil- er. As limescale also builds up on the boiler walls, we recommend to descale the boiler using KÄRCHER Bio descaler RM 511. The KÄRCHER Bio descaler RM 511 is a product based on citric acid, which is com- pletely biodegradeable. Caution Only use products approved by KÄRCHER to exclude any damages of the appliance. Disconnect the mains plug from the socket. Completely empty the steam boiler. Completely dissolve two bags of descaler by stirring it in 2 liters of warm water. Fill the descaling solution into the boiler and allow to react for approximately 8 hours.  Danger Do not screw the steam boiler safety cap on the appliance during the descaling. Do not use the appliance as long as there is des- caling agent in the boiler. Pour out the descaling solution. Rinse the boiler at least two more times with cold water to ensure that there is no res- idue left behind in the boiler. Turn on the appliance. Press the reset key until the indicator lamp "Descaling" goes off. The appliance is ready for use again. After approx. 50 operating hours, the indicator lamp "Descaling" shows the next neces- sary descaling process. Using soiled water can occlude the filter. This is shown by extraordinaly long run times of the pump or a complete malfunction. Replac the filter.  Danger Always disconnect the mains plug and al- low the steam cleaner to cool down before performing any maintenance work.  Danger Repair works may only be performed by the authorized customer service. Refill water. Decalcify appliance. Maintenance and care Rinsing the boiler Descaling the boiler Filter replacement Troubleshooting Indicator lamp "water shortage" glows red Indicator lamp "Descaling" glows white 20 EN

petent sales company are applicable in each country. We will repair potential fail- ures of your accessory within the warranty period free of charge, provided that such failure is caused by faulty material or de- fects in fabrication. In the event of a warran- ty claim please contact your dealer or the nearest authorized Customer Service cent- er. Please submit the proof of purchase. – Only use accessories and spare parts which have been approved by the man- ufacturer. The exclusive use of original accessories and original spare parts ensures that the appliance can be oper- ated safely and trouble free. – At the end of the operating instructions you will find a selected list of spare parts that are often required. – For additional information about spare parts, please go to the Service section at www.kaercher.com. Only use special accessories approved by the manufacturer. We hereby declare that the machine de- scribed below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval. 5.957-470 The undersigned act on behalf and under the power of attorney of the company man- agement. Authorised Documentation Representative S. Reiser Alfred Kärcher GmbH Co. KG Alfred-Kärcher-Str. 28 - 40 71364 Winnenden (Germany) Phone: +49 7195 14-0 Fax: +49 7195 14-2212 Winnenden, 2010/09/01 Warranty Accessories and Spare Parts Special accessories Name Part no.: Bio descaler RM 511 (3x 100 g of powder) 6.290-239.0 Caddy cart 6.962-239.0 Round brush kit with brass bristles 2.863-075.0 Round brush kit 2.863-077.0 Micro fibre cloth 6.905-921.0 EC Declaration of Conformity Product: Steam cleaner Type: 1.092-xxx Relevant EU Directives 2006/95/EC 2004/108/EC Applied harmonized standards EN 55014–1: 2006 + A1: 2009 EN 55014–2: 1997 + A2: 2008 EN 60335–1 EN 60335–2–54 EN 61000–3–2: 2006 + A2: 2009 EN 61000–3–3: 2008 EN 62233: 2008 Applied national standards TRD 801 Year of CE marking 1998 CEO Head of Approbation 21 EN

IPX4 Voltage in the handle V 24 Mains cable Order no. EU 6.647-757.0 CH 6.647-832.0 GB 6.647-831.0 Performance data Heating output W 2300 Pump W 50 Max. operating pressure MPa (bar) 0,32 (3,2) Permitted operating pressure MPa (bar) 0,57 (5,7) Temperature °C 145 Heating time per litre of water min ca. 4,5 Max. steam quantity g/min 82 Dimensions and weights Weight without accessories kg 8,0 Max. water capacity l 4,0 Tank content l 2,0 Boiler capacity l 2,4 Length mm 480 Width mm 305 Height mm 265 22 EN