Elcomax ELUX II Operation & User’s Manual

...................................................................................................... 5 2. Notice ......................................................................................................................................... 5 3. Copyright .................................................................................................................................... 6 4. Disclaimer ................................................................................................................................... 6 5. Trademarks ................................................................................................................................ 6 Before You Begin ................................................................................................................ 7 1. Main Features ............................................................................................................................ 7 2. Accessories ................................................................................................................................ 8 Hardware Description ......................................................................................................... 9 1. Front Panel Configuration .......................................................................................................... 9 2. Rear Panel Configuration ......................................................................................................... 10 3. Remote Control Unit ................................................................................................................. 11 4. Multi-Brand IR Remote Controller Setting ................................................................................ 14 Connecting diagram ......................................................................................................... 15 1. Receiver to A/C power .............................................................................................................. 15 2. Receiver to TV with Digital A/V Output ..................................................................................... 15 3. Receiver to TV with Analog A/V Output .................................................................................... 16 4. Connecting to Antenna Cable .................................................................................................. 16 Guide of Functions ........................................................................................................... 18 1. Selecting a Service ................................................................................................................... 18 1.1 Using CH UP/DOWN buttons .............................................................................................. 18 1.2 Using Service List ............................................................................................................... 18 1.3 Using Simple Service List ................................................................................................... 18 1.4 Using Recent Service List ................................................................................................... 19 2. Information Window .................................................................................................................. 19 3. Multi-Picture Display. ................................................................................................................ 19 4. Electronic Program Guide (EPG) ............................................................................................. 19 5. Favorite Group ......................................................................................................................... 20 6. Volume Control ......................................................................................................................... 20 7. Pause ....................................................................................................................................... 20 8. Subtitle ...................................................................................................................................... 21 9. Audio Control ............................................................................................................................ 21 10. Teletext ..................................................................................................................................... 22 11. PIP (Picture in Picture) ............................................................................................................. 22

1. Recording ................................................................................................................................. 24 1.1 Recording methods ............................................................................................................. 24 1.2 Recording Edit ..................................................................................................................... 26 1.3 Long Time recording ........................................................................................................... 26 1.4 Pause during recording ....................................................................................................... 26 2. Time Shifting ............................................................................................................................. 28 3. Playback (Play List) .................................................................................................................. 29 3.1 Recorded Files .................................................................................................................... 29 3.2 Imported Files ..................................................................................................................... 30 3.3 Music ................................................................................................................................... 30 3.4 Photo ................................................................................................................................... 30 4. Bookmark ................................................................................................................................. 31 5. Trick mode ................................................................................................................................ 31 Menu Map .......................................................................................................................... 32 Main Menu of Guide .......................................................................................................... 33 1. System Tools ............................................................................................................................ 33 1.1 Storage Manager ................................................................................................................. 33 1.2 Timer Settings ..................................................................................................................... 34 1.3 Service List Manager .......................................................................................................... 34 1.4 Data Transfer....................................................................................................................... 36 2. Configuration ............................................................................................................................ 37 2.1 Recording Option ................................................................................................................ 37 2.2 Parental Control .................................................................................................................. 38 2.3 Display Setting .................................................................................................................... 38 2.4 Time Setting ........................................................................................................................ 39 2.5 Language Setting ................................................................................................................ 39 2.6 A/V Output Setting .............................................................................................................. 40 3. Installation ................................................................................................................................ 41 3.1 Dish Setting ......................................................................................................................... 41 3.2 Positioner Setting ................................................................................................................ 41 3.3 Service Search .................................................................................................................... 42 3.4 Network Setting ................................................................................................................... 43 3.5 System Recovery ................................................................................................................ 44 3.6 System Information ............................................................................................................. 45 4. Utility ......................................................................................................................................... 45 4.1 Calculator ............................................................................................................................ 45 4.2 Calendar .............................................................................................................................. 45 4.3 CAS (Conditional Access System) ...................................................................................... 45 4.4 Plugin .................................................................................................................................. 46 4.5 YouTube .............................................................................................................................. 47 Troubleshooting ................................................................................................................ 49 Specifications .................................................................................................................... 50 Code Table for Universal Remote Control Unit ............................................................... 52 1. Key Table .................................................................................................................................. 52 2. TV Brands ................................................................................................................................ 54 3. VCR Brands ............................................................................................................................. 62 4. DVD Brands ............................................................................................................................. 67

 Read these instructions.  Keep these instructions.  Heed all warnings.  Follow all instructions.  Do not use this apparatus near water.  Clean only with dry cloth.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.  Do not reverse the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.  Only use attachments/accessories specified by the manufacturer.  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.  Unplug this apparatus during lightning storms or when unused for long periods of time.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING : To Prevent fire or shock hazard do not expose the set to rain or moisture. 2. Notice  These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.  The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.  The mains plug is used as the disconnect device. The disconnect device shall remain readily operable.

the cover (or back). No user serviceable parts are inside. Refer servicing to qualified service personnel. The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product 3. Copyright This manual is protected by copyright laws. Copy, use and reproduction of this manual in part or whole without Manufacturer’s prior written approval are prohibited. 4. Disclaimer The manufacturers, distributors and agents are not liable to any kind of damage caused by the use of the information contained in this manual. The instruction and descriptions which this manual contains are based on the time of this manual's production. The manufacturer constantly updates it with new functions and technology. All the specifications are subject to change without prior notice. 5. Trademarks HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

1. Main Features  Supports MPEG4 /MPEG2 - HD/SD and Fully DVB-S2 /DVB-S Compliant  Intelligent Blind Scan for both SD and HD TV & Multi-Satellite Search  Multi-LNB Controlled by DiSEqC Control Version 1.0, 1.1, 1.2 and USALS  HDTV PVR Receiver ( H.264/ MPEG4 HD )  Embedded Linux OS  Time Shifting, Recording & Playback with External HDD (USB 2.0)  Simultaneously Records upto 3 Channels and allows Viewing of 2 others (PIP) on the same Transponder  Powerful Extended EPG supports Event Recording  Dual USB 2.0 Host ports (MP3 Player & JPEG Viewer)  MKV, Xvid file play back support  Ethernet Support  High Definition On-Screen Display  Favorite Groups  Powerful Service List Manager for Favorites, Lock, Skip, Move, Edit and Delete  Service Sorting by Name, Transponder and CAS  User Friendly & Multi-language Supported (OSD & Menu)  Teletext / Subtitles Supported  Maximum 10,000 Services(TV & Radio) Programmable  Picture-in-Picture (PIP) & Multi-picture Display  Parental Lock / System Lock / Installation Lock  HDMI Video & Audio Output (576i, 576p, 720p, 1080i, 1080p)  CVBS(composite) Video & Audio Output via RCA  CVBS, RGB, Video & Audio Output via TV SCART  Optical Output for Digital Audio(SPDIF)  Software & Service channel Database upgrade via USB & RS-232C port  1 Smart card reader and 2 Common Interface Slots

purchased this unit. User's Manual AAA size Batteries X2 AC Power Cord Remote Control HDMI Cable

1. POWER BUTTON : Press to switch between STANDBY and POWER ON modes. 2. CH Up/Down BUTTON : Press to change services in normal mode, or to move highlighted-bar in menu mode. 3. Display : The 4-digit shows service number or menu state in normal mode. Show local time in standby mode. 4. Remote Sensor : Receives signal from remote controller. 5. STANDBY Indication LED(RED) : The LED lights on in standby mode. REMOTE Indication LED(GREEN) : The LED lights on when a key on the Remote Control is pressed. 6. USB (Front) : Use it when connecting to external USB storage device. 7. SMART CARD READER : Insert smart card for encrypted service access. 8. PCMCIA : To receive other pay-tv service you need a CA-Module(Viaccess, Irdeto, Nagravison, etc.) and a smart card from the service provider.

1. LNB IN: Use to connect a satellite antenna. 2. LNB OUT: Use it when connecting to another STB for loop-through. 3. AUDIO L/R : Connects to the TV or VCR using a RCA cable. (Stereo audio output / White, Red) 4. VIDEO : Connects to the TV or VCR using a RCA cable. (Composite video output / Yellow) 5. SPDIF : Connects to the audio system using a S/PDIF cable. (digital audio) 6. TV SCART : Connects to the TV input using a TV SCART cable. 7. RS-232C : Serial port for firmware update and data transfer. 8. Ethernet : Local area network port for direct computer connection. 9. USB : Use it when connecting to external USB storage device. 10. HDMI : Connects to the TV by using a HDMI cable for the best quality picture and audio. 11. A/C Switch : Power switch 12. A/C power cable socket : Connects to A/C power cord.

1. POWER : Turns the STB On/Off. 2. MUTE : Turns the sound On/Off. 3. Universal Buttons a. Universal TV : Change the TV Remote Controller. b. STB : Change the STB Remote Controller. c. Universal DVD : Change the DVD Remote Controller. 4. MODE a. V.Format : You can switch the Display Format (4:3 / 16:9) b. Sleep : To adjust sleep timer. c. TV/RADIO : Switches between TV and Radio. d. Resolution : To select the resolution format. Each time you press the Resolution button, the resolution changes in the following sequence: 576i > 576p > 720p > 1080i > 1080p 5. Playback Control Buttons a. Rewind : Rewinds at high speed. Each time you press this button the rewind speed is increased. b. Fast Forward : Fasts forward at high speed. Each time you press this button the speed is increased. c. Previous File : To play the previous MP3 file in MP3 play mode. This button is also used to jump back to beginning of recording during a playback. d. Next File : To play the next file. This button is also used to jump to end of recording during a playback. e. Play / Time shift : Display the progress bar of playback when no progress bar is displayed. Start playback with normal speed. Return to normal speed from trick mode.. f. Recording : To start Recording. g. Repetition (*): This key is used to play back a recording repeatedly. h. Pause : This key is used to pause the video. Press once more to resume the video. i. STOP : To stop time shifting, play back or recording. NOTE : (*) This button(Repetition) will be supported later, by new s/w version by upgrading. Please refer to your local dealer / distributor.

a. RED : Used for special function in menu. RED key is used to sort lists in service list or go to previous day search in EPG or make/delete the current position as a bookmark. b. GREEN : Used for special function in menu. GREEN key is used to set favourites setting in service list or go to the next bookmark position. c. YELLOW : Used for special function in menu. YELLOW key is used to find service in service list or change the audio track. d. BLUE : Used for special function in menu. BLUE key is used to set service list option in service list or display Multi-Picture. 7. Information : Shows the information box of the current programme. If you press one more time, a detail information box will be shown. 8. Recall : Moves to previous service. 9. ARROW Buttons a. Up & Down Key : To change the value of a selected item with preprogrammed values in menu. b. Left & Right Buttons : To move the cursor left and right in menu. 10. OK or Service List : Show the service list in non-menu mode and select an item or confirm in menu mode. 11. Menu : To enter the main menu or to move to the previous menu. 12. EXIT : Exit from the menu or pop-up window. 13. Page Up& Down : Move to the next or previous page if more than one page is available. This button also is change the location of sub picture in PIP. 14. Favourite : To display the satellites programmed into the receiver and the favourite groups.

16. Channel Up & Down: To change the TV or Radio service channel. 17. EPG(Electronic Programme Guide) : Show the TV/Radio programme guide. 18. Play List : To show the file list in the SATA HDD or USB Storage Device. 19. PIP Buttons a. PIP(Picture in Picture) : To open the PIP window. b. PIP Swap : Switching between main-picture and sub-picture c. PIP(Picture in Picture) Service List : To shown the sub-picture service list. 20. Numeric : Controls the numerical operation and service numbers directly. 21. Subtitle : To show multilingual subtitle. 22. Teletext : To show the digital teletext.

NOTE : When there is no input during about 10 seconds from set mode, set mode is canceled. 1. Direct Code Entry Step 1 : Turn on the DEVICE what you want to set up(TV / DVD / VCR) Step 2 : Press DEVICE and OK button during about 2 seconds at the same time.  DEVICE LED will blink twice. Step 3 : Input the 3 digit code numbers. (Refer to ‘Code Table for Universal Remote Control Unit’ in the rear section of this manual)  DEVICE LED will blink twice and the DEVICE turns off.  If you enter a wrong DEVICE code, DEVICE will blink once Step 4 : If your DEVICE turns off, press OK button.  DEVICE LED will blink twice. 2. Auto Code Search Step 1 : Turn on the DEVICE what you want to set up(TV, DVD) Step 2 : Press DEVICE and OK buttons during about 2 seconds at the same time.  DEVICE LED will blink twice. Step 3 : Press UP or Down button within 10 seconds to enter the Search mode. Step 4 : Press UP or Down button until the DEVICE turns off, one and one. Step 5 : If your DEVICE turns off, press OK button.  DEVICE LED will blink twice. 3. Code No. Checking (Number Call) Step 1 : Press DEVICE and OK buttons during about 2 seconds at the same time.  DEVICE LED will blink twice. Step 2 : Press INFO button within 3 seconds.  LED will blink according to inputted mode number on the device. ( Case of digit '0', it blinks 10 times.)

 Connect the A/C power cord between A/C power cord socket of receiver and A/C outlet. 2. Receiver to TV with Digital A/V Output  Connect the HDMI Cable to the HDMI Connector of the TV.  Connect SPDIF to Digital audio input of the equipment(Digital Audio) NOTE : Depending on the A/V equipment you own, there are various ways you can connect the STB. To choose the best connection option, please refer to the manual of the equipment you would like to connect to. To get High Definition playback of High Definition content, we recommend that you connect your high definition display with a HDMI cable. HDMI supports standard, enhanced or high-definition video and multichannel audio in a single cable.

 Connect the TV SCART to the SCART input of the TV.  Connect the VIDEO and AUDIO L, R to VIDEO IN and AUDIO L, R IN of TV. NOTE : The SCART cable connection is recommended for analogue TV or VCR The composite connection(RCA cable) is recommended for analogue TV You cannot view high definition video with the SCART and the composite video connector. 4. Connecting to Antenna Cable  Using Single DISH : Connect the Satellite Antenna cable to LNB IN.

 Using DiSEqC motor : Connect the cable of DiSEqC motor to LNB IN.

1. Selecting a Service To select the desired service (channel), please refer to the instructions below. 1.1 Using CH UP/DOWN buttons You can navigate between services by pressing CH UP/DOWN buttons. Whenever you press the CH UP(DOWN) button, current service will be changed to next/previous service. Please press CH UP or CH DOWN button until you fine the service you want to watch. 1.2 Using Service List To select the desired service in the service list, you should firstly display the service list by pressing the OK button. Use the ARROW buttons to select a desired service and press the OK button. You can see that the service is changed in the small screen on the top-right. To watch that service, press the OK button once more. To watch the previous service, press the EXIT button. In the Service List window, you can also select additional functions with the COLOR buttons. Press the RED button, and you can sort the services by the Alphabet, Transponder(TP), Group, Tuner and CAS (Conditional Access System). Press the GREEN button, and you can add the services to one of 10 Favorite List. Press the YELLOW button, and you can search & find the service via a virtual keyboard. Press the BLUE button, and you can adjust service list option. 1.3 Using Simple Service List  If you press NUMERIC buttons or UP/DOWN ARROW button, instant service list will be displayed.  Select the desired service by using the ARROW button, and press OK button to watch.  You can also enter the service number directly by using the NUMERIC button.

 To display recent service list, press the RECALL button for a short time.  To return to the previous service that you were watching, press RECALL button twice or for a longer time.  Choose the service from the recent service list, use the ARROW button to select, and then press the OK button.  Press EXIT button to exit from the recent service list. 2. Information Window If you want to view the information of the current service that you are watching, press INFO button. Then the Information window will be displayed. This Information window is automatically displayed when changing between the services. This window contains much useful information such as service number, service name, scrambled types of service, teletext, subtitle, Audio indication for Dolby Digital, Time duration of the service and so on. By pressing INFO button once again, you can get more detailed information about the service. 3. Multi-Picture Display. Press the BLUE button to display multiple pictures and use the RED button to select the display options for 9 or 12 multiple pictures. 4. Electronic Program Guide (EPG) Electronic Program Guide (EPG) allows you to see program schedule and program information from the service which includes this data as part of their transmission. Multiple services will be shown with a time line of programming events. The EPG supplies additional information of channel service, such as program listings, start/end times and detailed information about the program listings for all available services. The availability and details of information of these program details can be varied, depending on the particular broadcasters, individual services.

 Use the ARROW buttons to move to other services or to see previous/next guide.  Press the EPG button once to view full EPG with multi service list, and press it twice to view the additional EPG information of a specific channel service. Keep pressing the EPG button to toggle between the full and detailed menus of EPG.  Press the GREEN button to view next day EPG and the RED button to view EPG for a previous day.  Select the program by using the ARROW buttons then set the event timer by pressing OK.  You can schedule a recording with the EPG menu as follows. - Press RECORD button to schedule the event. This schedule can be checked in the menu of Timer Settings, in the System tool menu. - To cancel the schedule of the recording, press the OK button for the appointed event. - To edit the schedule of the recording, press the RECORD button for the appointed event. 5. Favorite Group Press the FAV(Favorite) button to view all favorite groups such as sports, movie, drama, satellite group and so on. Scroll through the various favorite group using the UP/DOWN ARROW buttons, and select the desired favorite group by pressing OK button. 6. Volume Control  To adjust the audio volume, press the VOL UP/ DOWN buttons.  Audio volume control bar will be displayed at the top of the screen and disappear after 4 seconds.  When necessary, press the MUTE button to turn on/off the audio sound. NOTE : The mute function remains set while you change services. 7. Pause PAUSE button is used to freeze the video. Press PAUSE button once more to resume the video.

provides subtitle information.  Press the SUBTITLE button on your remote control unit.  Select the desired subtitle language then press OK button.  The subtitle will be displayed in the selected language at the bottom of the screen.  To turn OFF the subtitle from the screen, Select ‘Off’ from the subtitle language list. NOTE : When program does not provide subtitle information, SUBTITLE button will not be active. 9. Audio Control Press YELLOW button on live TV service to display Audio Control menu. You can set Audio Track / Sound Mode / Sound Level.  Audio Track : You can see all the audio track of the service you are watching. Use the ARROW buttons to choose the preferred audio track. If you select Auto, audio track will play as what you set for audio language in language setting menu.  Sound Mode : To set sound mode, Stereo / Mono / Left / Right.  Sound Level : To set sound level, Low(-30%) / Normal / High(+30%) / Off.

11. PIP (Picture in Picture)  When you press the PIP button, a sub picture screen will appear on the main screen view. If you press the PIP button one more time, the primary picture and the sub picture will appear together side-by-side with the same size. The picture of the left side is the primary and the picture on the right side is sub. If you press the PIP button one more time, the sub picture will disappear.  In the PIP mode, you can change primary and sub with the PIP SWAP button.

 If you press the PIP SERVICE LIST button, you can see the list of services of sub picture. You can change the service of the sub picture from the service list shown. NOTE : Changing services of sub the picture could be limited by the condition of the tuner connection or a recording event ongoing.

1. Recording You can select a recording storage device with the following sequence : Menu > Configuration > Recording Option > Record Device. Default is set to ‘USB’. 1.1 Recording methods There are 3 type recording methods. (Instant Recording / Time Scheduled Recording / Event Scheduled Recording).  Instant Recording : You may press the RECORD button to start your recording instantly at anytime.  Time Scheduled Recording : - In Timer Settings menu, you may set the time & program to record your desired service program. (Go to Main Menu > System Tools > Timer Settings) - Press the GREEN button to activate the new timer edit screen. - In the Timer Edit screen, you may choose start date/time, duration, service, mode, type (Recording/Play), Tuner (Auto/1/2) then simply press the Yes button to schedule your recording event. Please note that the minimum offset time of 3 minutes is required from the Start time & current time for appropriate recording process to take place.

- In the EPG menu screen, you can choose the event you wish to schedule or record. - While watching the LIVE TV screen, press the EPG button to access the EPG menu screen. - Go to the event which you wish to view at the time indicated on the EPG schedule, then press OK. The event will be scheduled with the BLUE play icon. This BLUE play icon means that you want to just watch the event at the scheduled time. - Press the OK button one more time, then the event will be scheduled with the RED dot icon. This RED dot icon means that you want to record the event at the scheduled time. - When you set an event for scheduled recording via the EPG menu. It automatically sets a Timer Event in the Main Menu > System Tools > Timer Settings.

Press the REC button while recording to see the recording message window.  Pause : Select Pause Recording then press OK to pause the current recording process.  Duration : Set recording duration. Press LEFT/RIGHT ARROW button to change recording duration.  Stop Position : Set the finishing time of recording. - End of current event : finish recording at the end of current event - End of next event : finish recording at the end of next event. - Not Available : EPG is not available.  Record Slot : When you are recording 3 services, you can select Primary / Secondary / Tertiary by pressing Left/Right Arrow button, then go to Change Service and press OK button to show that recording service. 1.3 Long Time recording During lengthy time recording processes of 4GB(Giga Byte) or more, additional files may be created per every 4GB. (For example; aaa.ts, aaa.ts1, aaa.ts2… and so on). You must remember not to delete any of duplicated file. These files are only able to be viewed with your PC not with the receiver (STB). 1.4 Pause during recording  When the PAUSE button is pressed during recording, only the live video is paused, but recording is continued at the selected recording device. (Menu > Configuration > Recording Option > Record Device)

the pause time.  During recording, press the PLAY/TIMESHIFT button to show the Play bar screen.  While the Play bar is shown on your screen, you may use the LEFT/RIGHT Arrow button to move (forward & backward) freely within recorded time.  If you press YELLOW button in the Play bar, you can set the Position Jump time at Auto / 10sec / 30sec / 1min / 2min / 4min / 10min. Then press LEFT/RIGHT Arrow button to jump as you set the time.  If you press the STOP button, it will go to LIVE and you may press PREV FILE button to view the recorded file from the beginning.  STB can record up to 3 different services simultaneously.  When recording 3 services at the same time, you can press the STOP button to see a message window of current recording status / information. If you select one of the 3 or 2 recordings and press the OK button, that recording service will be stopped. If you press the STOP button during recording 1 service, a recording stop message window will appear. Then select YES to stop recording. NOTE : If If you want the recording up to 3 services, please format the storage devise with ‘NTFS’ or 'Journaled(JFS)' file system. Menu > Storage Manager > Format > File System > select ‘NTFS’ or 'Journaled(JFS)'..

You can select a storage device for a temporary file of the Time shifting with the following sequence: Menu > Configuration > Recording Option > TimeShift Device. Default storage device is set to ‘USB’  If pressing the PAUSE button during Time shift, the live video is paused but the temporary recording for time shift is continued at the selected storage device.  Press the PAUSE button once again, then the event will resume from the paused time.  While watching live TV, press the PLAY/TIMESHIFT button to show the play bar on your screen.  When the play bar is displayed on your screen, you may use the LEFT/RIGHT Arrow buttons to move freely through the recorded times bar.  If you press YELLOW button in the Play bar, you can set the Position Jump time at Auto / 10sec / 30sec / 1min / 2min / 4min / 10min. Then press LEFT/RIGHT Arrow button to jump as you set the time.  If you press the STOP button while time-shifting, the screen will be turned to a live TV channel. You can also use PREV FILE button to move to a start location of the Time-shifted file.

You can playback many files with the Playlist which you access by the PLAYLIST button. In the Playlist, you can check and playback recorded files, multimedia movie files, MP3 music files, and image files. With the LEFT/RIGHT ARROW button, go to the Recorded Files, Imported Files, Music and Photo category and check & for playback files in each category. If press the PLAYLIST button, you can see all playable files. In this mode, Green button is not in operation (not working). And when you select the file, you will not be able to select the different types of file format files together at once. You can press LEFT/RIGHT Arrow button to move to Recorded Files / Imported Files / Music / Photo / Play List menu. 3.1 Recorded Files  If you press RIGHT Arrow button in Play List, you can go to Recorded Files menu.  Locate the recorded file(s) you wish to play with the UP/DOWN button and press the OK button to playback the recorded file(s).  To choose a particular selection of files, select a desired file and press the RED button. Press the OK button to begin the selected files.  Select Device : Press PLAYLIST button one more time in the Playlist mode to see “Select Device” window, and select the device which has the file you want to play. NOTE : “Select Device” window shows devices which are currently connected to the STB.  Sorting : If you press the YELLOW button, you can sort the files by Time / Name / Size / Type.

If you press the BLUE button, you can select a option for Delete, New Folder, Move to Folder, Copy to Device, Rename, Lock/Unlock. You can select multiple files together and delete or move all of them at once. - Delete : To delete file(s) - New Folder : To make new folder. Default name of the folder is “Group#”. - Move to Folder : To move the selected file(s) to a folder you want. This option is available if there is no folder. - Copy to Device : To copy the file(s) to other storage device. This option is not available if only one storage device is connected. - Rename : To rename the folder or file. - Lock / Unlock : To lock and/or unlock the file with your PIN Code. You must select a file to do this option. 3.2 Imported Files  If you press RIGHT ARROW button in Recorded Files, you can go to Imported File menu.  Locate the file(s) you wish to play with the UP/DOWN button and press the OK button to enjoy the movie.  To choose a particular selection of files, select a desired file and press the RED button. Press the OK button to begin the selected files.  You can use the same ‘Select Device’, ‘Sorting’ and ‘File Option’ features as in the Recorded Files. 3.3 Music  If you press the RIGHT ARROW button in Imported Files, you can go to Music menu.  If you press the RECALL button, you can enjoy music with Shuffle playback and repeat. You can use the same ‘Select Device’, ‘Sorting’ and ‘File Option’ features as in the Recorded Files. 3.4 Photo  If you press the RIGHT ARROW button in Music, you can go to the Image Photo menu.  If you press the RED button or OK button, you can start the slide show of image files. Press the EXIT button to stop slide show. - RED button : Auto Slide show - OK button : Manual Slide show  If you press the GREEN button, you can adjust the Slide Time, Repetition, Title, Down-scale.  You can use the same ‘Select Device’, ‘Sorting’ and ‘File Option’ features as in the Recorded Files.

button. Bookmark(s) are indicated with a Green line on the play bar. Also, you may press the RED button to activate the play bar to mark your bookmark(s).  When the play bar is on, user can move / jump between the bookmarks by pressing the GREEN button.  If you wish to delete any Bookmarks, go to that bookmark by pressing the GREEN button, then press the RED button to delete the current bookmarks. 5. Trick mode  The user can change the speed of a fast forward play with FF(Fast Forward) button. Press FF button to change the speed to x2, x4, x6, and x8. If you once again press FF button in its x8 mode, it returns to normal(x1) speed play.  You can also change rewind speed with the REWIND button. Press REWIND button to change the speed to x2, x4, x6, and x8. If you press the REWIND button again in it is at the x8 mode, it returns to normal speed.  You may press the PAUSE button at any time to pause a pre- recorded event. Press the PAUSE button once again to resume play of the recorded event.

2. Timer Settings 3. Service List Manager 4. Data Transfer Configuration 1. Recording Option 2. Parental Control 3. Display Setting 4. Time Setting 5. Language Setting 6. A/V Output Setting Installation 1. Dish Setting 2. Positioner Setting 3. Service Search 4. Network Setting 5. System Recovery 6. System Information Utilities 1. Calculator 2. Calendar 3. CAS 4. Plugin 5. YouTube

To display the menu, press the MENU button at any time. You can select the sub menus by using the ARROW buttons. The selected sub menu becomes highlighted. After selecting (highlighting) the sub menu you want to access, press the OK button. If you want to return to the previous menu, press the MENU button. And if you want to exit from the menu, press the EXIT button. 1. System Tools 1.1 Storage Manager The items in this menu allow you to access and control the storage devices that you want.  Current Device : Select the storage device you want to access with the ARROW/OK buttons.  Status : You can see the information of current connected devices, such as ‘Mounted’, ‘Not Available’  File System : It shows the file system of the current device. You can also select desired file system that you want when you format the device. NOTE : NTFS is the recommended file system to format, and it will be also recognized in Windows system  Total : Displays total size of current device.  Free : Displays free size of current device.  Format : If you press the OK button to format current device, the device will be formatted with above file system. NOTE : When file system is ‘Unknown’, the device will be formatted with ‘NTFS’.  Storage Check : Check the current connected device.  Play List : Press OK button to move to ‘Play List’ menu directly.

Insert a new timer entry or modify an existing timer entry.  To add new timer entry : Press the GREEN button. Timer Edit window will popup. You can set the specific start date, time, duration and service for its reservation. And you can choose one of Timer Modes as 'Once' or 'Daily' or 'Weekly'. You can choose timer operation type as ‘Recording’ or just to 'Play'. - If you choose 'Recording', it will start recording at that time. - If you choose 'Play', it will change and tune to the service that you wish to watch. - If you set Alarm Confirm Message to ‘On’, alarm message will activate. Or choose ‘Off’ to disable.  To modify existing timer entry : Choose the timer entry which you wish to modify and press the OK button.  To delete an existing timer entry : Choose the timer entry that you want to delete and press the RED button.  Press YELLOW button to enter to Calendar.  Press BLUE button if you want to delete all the event(s). NOTE : If you reserve one or more event through the EPG menu, the reserved event(s) will be added to Timer Settings automatically. 1.3 Service List Manager Service List Manager menu will appear when you press the OK button. You can select Edit Mode by pressing the YELLOW button.  Lock Services : All service lists will be shown on the left side of the window, the middle will show the list of service to be locked. By using the ARROW and OK buttons, you may move the chosen service to the middle window to lock that service. Services can also be moved back from the middle to the left side to un-lock them.  Move Services : All service lists will be shown on left side of the window, services to be moved will be shown on the middle window. Move the service to the middle window by using the ARROW and OK buttons, then the middle window service will be moved to a specified location when the desired location is selected from the left window.

the window. By using the ARROW and OK buttons you may select services to be deleted by placing them in the middle window. The press the GREEN button to delete the selected services.  Skip Services : All services will be shown on left side of the window, the middle window will only show the services that are chosen to be skipped. By using the ARROW and OK buttons you may move the selected services from the left to middle window to skip them.  Set Favorite Services : Use the ARROW and OK buttons to select your desired favorite group. Once, favorite group is chosen, the left side window will show all service lists and the middle window will only show the selected services of the favorite group selected. By using the ARROW and OK buttons, you may ADD the desired services to a favorite group or DELETE any from the favorite group. The name of the favorite group can be edited by pressing the GREEN button.  You can go to Select Favorite Group by pressing GREEN button. In this mode, you can select Lock Group / Edit Group Name / Add Group / Delete Group.  Edit Services : All services name will be shown on the left side of the window. Move the highlighted bar to the service where you want to edit its name and press the OK button for Edit Service menu. Then move the highlighted bar which you want to edit. You can edit Service Name, Video Stream Type, Video PID, Audio Stream Type, Audio PID, PCR PID.

When the data transfer task is in process, the Front USB slot is set to a default device slot. But, if no USB device is connected on a front USB slot, then the Rear USB slot is set as a device to be used for the data transfer process. NOTE : If no USB device is connected on either two (Front & Rear) USB slots, then a Menu item will not be available.  Transfer all System data to USB storage : If you want to transfer and use BOTH of the current system parameters and service data in the future, this menu will allow you to store all data to your USB device. Press OK button to store all current data to an external USB storage.  Transfer Service data to USB storage : If you want to transfer and use ONLY the service data in the future, this menu allows you to store current service data. Press the OK button to store the current service data to your external USB storage. The service data can also be viewed and edited on a PC with an appropriate editor (DrEdit) for the file saved.  Data download from USB storage device : This menu allows you to download the saved data from the external USB storage to your STB. Press OK button to download data.

 Alarm Confirm Message : Turn ‘ON’ this Alarm message to indicate and show the alert pop-up message when there is a reserved recording event. The alert message will show 3 minutes before the starting time of the reserved recording event.  Recording Stop Message : - Set 'On' : When you press the STOP button while recording, then a confirmation window is displayed. - Set 'Off' : When you press the STOP button while recording, the STB will stop the recording process immediately / instantly without asking the additional confirmation from the user.  Extra Recording Time Before(Start) & After(Finish) : - You can add an extra recording time before start / after finish (1min /2min /3min /4min /5min/ 10min/ 15min/ off) to scheduled recording events. If you set an extra recording time by using the ARROW and OK buttons, the scheduled recording event will have a ‘Start’ / ‘Finish’ time of additional recording time added to the basic event. This option only works for real time events. But, when you schedule a service recording in the Timer Settings menu, this option has no affect.  TimeShift Start : You can choose the method of TimeShift function. - Auto : TimeShift function is automatically activated. - Off : TimeShift function will be disabled. - Manual : TimeShift will be activated when the Pause key is pressed.  TimeShift Duration : You can adjust TimeShift duration in 30 minute intervals. (Off /30min /60min /90min /120min). This duration defines the maximum time length of the TimeShift as long as the storage device has enough memory space left.  Playback Position Jump : When you use LEFT/RIGHT ARROW button to move back/forward through the recorded time bar, You can select the time intervals. (10 Sec / 30 Sec / 1Min / 2 Min / 4 Min / 10 Min / Auto).  Playback Numeric Function : This selection of function defines the operation type of the NUMERIC buttons of your remote control unit (RCU) while the ‘Playbar’ is displayed on the screen. - Commercial Skip : When the NUMERIC buttons (1 to 9) are pressed the video will move forward according to the NUMERIC buttons pressed. For example ; when ‘1’ is pressed, 1min move forward, ‘5’ is pressed, 5min move forward from current position. When ‘0’ is pressed, it will move back for 1minute. - Percentage Move : When the NUMERIC buttons are pressed, the video will move to the location of that % percentage of numbers pressed. For example ; if you press ‘10’, you will move to the 10% location of the total video length. If you press ‘99’, you will move to the end of the video clip recorded.  TimeShift Device : You can select the TimeShift Device you wish to use. - USB1(Front), USB2(Rear), Network Drive.  Record Device : You can select the Recording device you wish to use. - USB1(Front), USB2(Rear), Network Drive.

User’s access rights to a service and programs are controlled by a 4-digit secret code that is defined by the user. Whenever you attempt to access the parental control menu, a pop-up window will ask you to input a PIN code. (If necessary, you can change it.) NOTE : The default PIN code is ‘0000’  Censorship : Set the parental guidance rating of highlighted censorship classification. The parental level is given as an age- based number.  Change Pin code : To change your PIN code, input the new PIN code using the NUMERIC buttons. To verify the new PIN code, input the new PIN code again.  System : Set the access rights to the System menu.  Installation : Set the access rights to the Installation menu.  Configuration : Set the access rights to the Configuration menu.  Edit Service : Set the access rights to the Edit menu.  Plugin : Plugin Set the access rights to the Plugin menu. 2.3 Display Setting  Info Box position : Set a position of the information window.  Info Box Display Time : Set the time duration of the information window being displayed on the screen after changing services.  Info Box Event Type : Set the event type that display in left bottom part of the information window. - Present Event with Time : Display the present event name with time. (Default) - Present and Follow Event : Display the present and following event name.  Volume Bar Display Time : Set the time duration of the volume bar being displayed on the screen after changing audio volumes.  EPG Time scale : You can set the time scale in hours which is displayed for a program in the EPG window.  Zapping Mode : You can set the zapping mode as follows (zapping mode is when changing services). - Black screen : Display a black screen when changing between services. - Freeze : Display the last still picture when changing services.  Simple Service List : To set the simple service list ‘On’ to display or ‘Off ‘. - On : Press UP/DOWN ARROW button to display the simple service list while watching live TV. - Off : If you set Off, channel Up/Down when you press UP/DOWN ARROW button.  Front LED Lighting Time : You can adjust the lighting time of the front LED.  Front LED Brightness : You can adjust brightness of the front LED with 4 steps. By setting ‘off’ this option, will turn off the front LED lighting.

 Time Setting : To set the current time, you can use two modes; Auto or Manual.  Local Offset : Enter the offset value by using the standardized information of current service area.  Daylight Saving : If you want to apply daylight saving, select the counter by using the ARROW buttons.  Clock Mode : Select the type of clock display(12 Hours or 24 Hours) using ARROW buttons.  Wake Up Mode : Enter the time for the receiver to automatically power ON. And you can choose one of Wake Up Mode as ‘off’ or ‘Once’ or ‘Daily’ or ‘Weekly’. - Wake Up Date : Select the date when the STB is turn on. Press the OK button to display calendar. - Wake Up Days : Select a day of the week when the STB is turn on. - Wake Up Time : Enter the wake up time of the STB using the NUMERIC buttons. - Wake Up Service : Select the service when the STB is turn on. Press the OK button to display the service list.  Sleep Mode : Enter the time for the receiver to automatically switch OFF and go to standby mode. And you can choose one of the Wake Up Mode as ‘off’ or ‘Once’ or ‘Daily’ or ‘Weekly’. - Sleep Date : Select the date when the STB is turn off. Press the OK button to display the calendar. - Sleep Days : Select a day of the week when STB is turn off. - Sleep Time : Enter the turn-off time of the STB using the NUMERIC buttons. 2.5 Language Setting  Menu Language : Select the desired menu language by using the ARROW buttons. NOTE : The menu and operation languages can be changed depending on the country sold. Available languages are subject to change without prior notice.  Audio Language : Select the default language for the audio when changing services. If no other language is provided, then the default language of current will be automatically selected.  Subtitle Language : Select the default language for subtitle when changing service.  Teletext Language : Select the default language for Teletext.  User Font file : Select a font you want to use. NOTE : To show and use the User Font, please install a desired font file(*.ttf) to the /Var/Font directory(folder) in your PC which is connected with your receiver(STB) by network. Then press LEFT/RIGHT button to select a font and press OK button.

 TV Type : Select the TV types.(PAL/NTSC/Auto) In Auto mode, the STB is automatically selected to NTSC or PAL accordingly to the service played.  TV Aspect Ratio : Select the aspect ratio of TV which is connected to the STB (4:3/16:9). This menu must be set prior to selecting the Display Format function.  Display Resolution : Select the Display Resolution of the screen by using ARROW or OK button. You can also change the resolution with Resolution button in the remote. Each time you press the Resolution button, the resolution changes in the following sequence: 576i > 576p > 720p > 1080i > 1080p. NOTE : Please note that your TV may not show a picture depending on the Display Resolution set by your STB as well as if set to PAL when NTSC is required or vice versa. If you set the Display Resolution as SD(576i), your TV cannot display anything when the TV is connected to the Component Video(YPbPr). If you set the Display Resolution as HD(more than 576p), your TV cannot display anything when the TV is connected to the SCART or Composite Video output of the STB. In case of HDMI, your TV can display a picture for all of the resolution settings of the STB. But it is also possible that your TV may not display a picture with 576i, because some HDTV’s does not support 576i.  Display Format : In case of a 4:3 ratio TV set, you can select Letter Box or Pan&Scan. In case of a 16:9 ratio TV set, you can select Pillar Box or Full Screen. - 16:9 Display format on 4:3 TV set Letter Box : You can see the full screen of 16:9, but top and bottom edges of your TV screen display black horizontal Pillars. Pan&Scan : The picture is displayed in full on your 4:3 TV screen, but left and right sides of the original picture cannot be displayed. - 4:3 Display format on 16:9 TV set Pillar Box : You can see the full screen of 4:3, but left and right sides of your TV screen display black vertical Pillars. 4:3 Full Screen : The picture is displayed in full on your 16:9 TV screen, but left and right sides of the original picture is displayed with widening of the screen from left and right. Because of the artificial widening, the TV picture will be distorted.  Video Output Mode : According to Display Resolution, you can select the Video Output Mode. - In case of More than 576p(HD) : The ‘RGB’ output will be disabled automatically.  HDMI Dolby Digital : Set the Dolby Digital mode 'On' or 'Off' in status of HDMI output.  Dolby Digital Default : Set the Dolby Digital Default mode 'On' or 'Off'. If you set 'On', Dolby Audio will play on the service that support Dolby Audio.  Sound Mode : Set the audio mode output among the RCA jack, optical SPDIF and HDMI (Stereo/Mono/Left/Right).  Standby Power : You can select the standby power. - ‘On’ : Front window displays clock besides standby red LED in case of standby mode. - ‘Off’ : Front window only displays standby red LED in case of standby mode.  Audio Sync Delay : To adjust Audio Sync. You can adjust from 0ms to 400ms.

Select the satellite/antenna and LNB settings for service sear ch. The values that are set in this menu will be available fo r selection in other service searching menus.  Satellite : Select the satellite which you want to do a search for. - Press the LEFT/RIGHT ARROW button to select the satellite. - If you press the OK button, the entire satellite list will be displayed. - Select the desired satellite name to search. - If the desired satellite name is not listed then select User Defined.  Frequency : Select the satellite frequency which you want to use for checking the signal.  LNB Power : Select the LNB power on or off.  LNB Type : Select the LNB type.  LNB Frequency : Select the local oscillator (L.O.). frequency that is specified for the LNB used.. - Use the LEFT/RIGHT ARROW buttons to select the LNB frequency. - If the required LNB frequency is not listed, then enter the frequency manually using the NUMERIC buttons. - When you select Universal LNB type, both 9750 and 10600 are supported at the same time. And then the LNB 22KHz setting is disabled.  LNB 22KHz : When you use a separate coax 22 KHz tone switch box, make the 22 KHz tone switch enabled or disabled to select the input you desire of the tone switch.  DiSEqC Switch : If you use DiSEqC 1.0 or DiSEqC 1.1 switch, select one of the DiSEqC inputs.  Service Search : Press the OK button to move to the Search Menu 3.2 Positioner Setting  Satellite : Select the satellite which you want to search for the Service. - Press the LEFT/RIGHT ARROW button to select the satellite. - If you press the OK button, a complete satellite list will be displayed. - Select the wanted satellite name. - If the desired satellite name is not listed then select User Defined.  Frequency : Select the satellite frequency you want to use to check for a signal.  Positioner : Select the positioner. - None : (No Positioner) - Using DiSEqC 1.2 : Move : To move the dish, press LEFT/RIGHT button. Fine Move : To move the dish in smaller steps, press the LEFT/RIGHT ARROW button. Step : Set to positioner moving steps as 1, 2, 3, 4 Positioner Command : To use various positioner commands, press the OK button. Then, available positioner commands will appear.

Dish Longitude : Enter the longitude position of the antenna using the NUMERIC buttons. Dish Latitude : Enter the latitude using the NUMERIC buttons. Go To : Press the OK button to rotate the dish to the selected antenna position. Positioner Command : To use various positioner commands, press the OK button. Then, available positioner commands will appear.  Dish Setting : Press the OK button to move to Dish Setting menu directly.  Service Search : Press the OK button to move to Service Search menu directly. 3.3 Service Search  Auto Search Mode : - Satellite : Press the OK button to select the target satellite to be searched. - Search Type : Select the search type. - Network Search : You can select Off or On. When you select ‘On’, you can find more transponders using the home network. As it refers to NIT during searching, if there is the frequency information of other transponder, it searches the other transponder besides the transponder that the user inputs. - Time Calibration : You can select ‘Simple’, ‘Full’ and ‘Off’ to get TDT(Time Data Table) from each TP - Dish Setting : Press the OK button to move to Dish Setting menu directly. - Positioner Setting : Press the OK button to move to the Positioner Setting menu directly. - Start Search : Press the OK button to start search.  Manual Search Mode : - Satellite : Press the OK button to select the target satellite for search. - Frequency : Select the frequency from the list to search. - Symbol rate : Enter the symbol rate using the NUMERIC buttons. - Polarity : Select the polarity. (Vertical/Horizontal) - Search Type : Select the search type. - Network Search : You can select Off or On. When you select ‘On’, you can find more transponders using the home network. As it refers to NIT during searching, if there is the frequency information of other transponder, it searches the other transponder besides the transponder that the user inputs. - Dish Setting : Press the OK button to move to the Dish Setting menu directly. - Transmission : You can select ‘DVB’ and ‘DVB-S2’ - Start Search : Press the OK button to start a search

- Satellite : Press the OK button to select multiple satellites. - Frequency : Set Auto to search whole frequency, Set Manual to search only desired frequency. - Polarity : Select the polarity. (All Polarity/Vertical/Horizontal) - Search Type : Select the search type. - Dish Setting : Press the OK button to move to the Dish Setting menu directly. - Start Search : Press the OK button to start a search.  Advanced Search Mode : - Satellite : Press the OK button to select the target satellite for search. - Frequency : Select the frequency from the list to search. - Symbol rate : Enter the symbol rate by using the NUMERIC buttons. - Polarity : Select the polarity. (Vertical/Horizontal) - Video PID : Enter the video PID using the NUMERIC buttons. - Audio PID : Enter the audio PID using the NUMERIC buttons. - PCR PID : Enter the PCR PID using the NUMERIC buttons. - Transmission : You can select ‘DVB’ and ‘DVB-S2’ - Start Search : Press the OK button to start a search. 3.4 Network Setting To use a Network connected to the STB Ethernet port, you have to prepare the STB Network settings. When the STB and a PC are connected via a network, you can access the files of the STB storage device such as USB storage device. NOTE : If you use DHCP function of router, you can set easily network configuration.  DHCP : You can select On/Off for the Dynamic Host Configuration Protocol (DHCP) to get the all configuration from the router. - If you select ‘On’ : You will obtain the configuration from network and be set up automatically. In this case, the remaining item (IP Address, Subnet Mask, Gateway, First DNS, Second DNS) are automatically set and you don’t have to configure them manually. - If you select ‘Off’ : You have to input the IP address manually together with the following data. - IP Address, Subnet Mask, Gateway, First DNS, Second DNS : You can input the address with the OK button, NUMERIC buttons and the LEFT/RIGHT buttons. You can move to the next item of Subnet Mast with the DOWN button and you can configure the following items in the same way.  Firmware Upgrade Server : To upgrade the firmware by downloading from a internet server. NOTE : Server installation and settings must be controlled by expert server manager. A storage device must be connected with your receiver(STB) when firmware upgrade from server.

assignment unique to each STB.  Control of the files via the network and your PC : - Check the IP Address of the STB on the Network Setting menu. - Press Enter button on your PC, after writing IP Address on the web browser address line. Ex.) \\168.158.10.146\storage - You can see the folder name of USB1 and USB2 in the Storage folder. - USB1 : Front USB Storage Device - USB2 : Rear USB Storage Device - You may be able to load and retrieve data between the PC and the STB via the browser -  Dynamic settings (RED key) - You can make your DDNS setting in this menu by pressing the RED colored button. - For more details about your DDNS settings, please ask your local DDNS service provider.  Wireless LAN can be supported by using the ‘USB to Wi-Fi’ module connected (*Option) - By pressing the BLUE colored button, you can automatically find and do the settings for AP. - For the details of Wireless Wi-Fi settings, please refer to the additional AP manual. NOTE : The speed of Wireless LAN is slower than the Wired LAN. So, it could take much more time when a file copy / move functions are performed. NOTE : Inevitably, only the limited types of Wireless LAN modules are supported. So, you MUST check for the compatible / supported types BEFORE you purchase. Currently supported types are : RT73 series, RT3070 series, RT2870 series. 3.5 System Recovery  System restore to factory default : Restore the factory set values in case the user has encountered some problems after changing any new parameters of service data and other parameters which may be in error. Press the OK button to erase all services and restore default setting.  Reset Configuration data : Maintain the service data and reset the configuration data.  Reset Service data : Maintain configuration data and reset the service data.  System restore to stored position : Restore the stored values including service data and system parameters. Press the OK button to restore all data.

allows you to store current state. Press the OK button to store current state.  Delete store position : Delete stored system data. 3.6 System Information This menu displays general information about the hardware and software version of your receiver. 4. Utility 4.1 Calculator To use the calculator, highlight the calculator and press the OK button. 4.2 Calendar To display the calendar, highlight the calendar and press the OK button. Utilize the ARROW buttons to choose the date. If you press PAGE UP/DOWN button, you can see the past/next month of the calendar. 4.3 CAS (Conditional Access System)  Smart Card Slot - Conax smart card menu : To watch scrambled services, you need to have an appropriate Conax smart card from the service providers. Insert a valid smart card into smart card slot (only the bottom slot of the two is active). The message of ‘Smart card Initializing…’ will appear on the screen. After the message disappears, you can watch the service you want. - Smart card information : You can view the current status of smart card. Select the slot which you want to view using the ARROW buttons. And press the OK button.

To watch scrambled services, you need to have a Common Interface Conditional Access Module(CAM) and an appropriate smart card from the provider. Insert the CAM together with a valid smart card into CI slot (two slots available). The message of ‘CI Initializing…’ will appear on the screen. After the message disappears, you can watch the service you want.  CAM information You can view the current status of CAM. Select the slot which you want to view using the ARROW buttons, and press the OK button. If the CAM is available, you can view information about each slot. NOTE : The displayed information of each CAMs may be different depending on the CAM used.  CI message - On : To display the CI message on live TV service. - Off : To disable the CI message on live TV service. 4.4 Plugin If you have the program file for Plugin, you can download the file(s) to Plugin then enjoy the program.  Download Plugin File - In the USB storage, please create a new folder name ‘plugin’ and in this ‘plugin’ folder, create a folder name ‘bin’. (plugin > bin) - Store(Copy) the plugin file in the ‘bin’ folder. - Connect the USB storage to the receiver. When Software Download menu is appeared, then press LEFT/RIGHT ARROW buttons to move to User Data Download mode. - Press RED button to start download the plugin file that you want. NOTE : You can also download by Menu > System Tools > Data Transfer > Data download from USB storage.  Plugin Menu - RED button : To set the plugin Start Type. You can select Auto or Manual. - GREEN button : To Start the plugin. You will see ‘Started’ in State if the plugin is started. - BLUE button : Press BLUE button if you want to delete the plugin file.

WebZeal when you want web surfing.  Executing WebZeal with USB Storage device - Stored the WebZeal file to the USB storage device. File name : ‘WebZeal-201xxxxx.mnt’. - Connect the USB storage device to your receiver then go to Menu > System Tools > Storage Manager.  Set the Current Device to File Mount Drive.  Set the Mount File Name to WebZeal-201xxxxx.mnt  Press Connect then go to Menu > Utilities > Plugin to start the WebZeal. NOTE : If you are using WebZeal by File Mount Drive, current USB storage device will not allow to use PVR functions such as recording and time-shift. But it can be use when WebZeal is not in use.  WebZeal Option - RED button : Press to set the current web page as home. - GREEN button : Press to add the current web page to favorite. - YELLOW/BLUE button : Press to adjust the page Zoom In and Zoom Out as you want. - MENU button : Press MENU button to show simple internet menu. 4.5 YouTube  Required settings : Before you can enjoy the YouTube feature with your STB, please make sure of the following conditions. - Set-top-box should be connected with Ethernet cable, with proper network settings. (Please refer to the menu of “Network setting”, and its operation instructions). - Sufficient buffering with storage memory (USB) is needed ;  You can plug in an USB memory of suitable memory size for buffering. NOTE : a) Minimum required USB memory size for buffering depends on the size of the contents that you wish to watch from the YouTube service. So in general, it is recommended to use a bigger and sufficient sized USB memory for enough buffering. b) Problems due to network environment : Problems such as flickering and freezing of the screen can occur while you are watching the YouTube service. These kind of problems can often occur due to the lagging and slow speed of the network status from your internet service provider at home. This may also cause the STB to be halted, then we kindly recommend to reset to STB power for rebooting and continue using.

- YouTube menu is located in the ‘Menu > Utilities > YouTube’. - On the right side of the screen, you can see the list of thumbnails of the contents. - Press the PAGE UP/DOWN buttons to navigate quickly in the service list on the right. - On the left side of the screen, the detailed information of the selected thumbnail is being displayed.- - Use the ARROW buttons to navigate through the menu - And press the OK / Play buttons to start viewing the selected content. - While playing, use the PAUSE / STOP buttons to pause, or stop playing the service. - Trick play modes (FAST FORWARD / REWIND) are not support in the STB’s YouTube menu. - Use the VOLUME UP / DOWN / MUTE buttons to adjust the audio sound. - Press the MENU / EXIT buttons to exit from the service, or to the menu while you are watching the service.  Using the Hot (colored) buttons in the YouTube menu : - RED (Full screen) : Press this button to view the service in full screen size. This button only functions while the service content is being played. - Yellow (Search) : Press this button and input the name of the content that you wish to search in YouTube. When the virtual keyboard is displayed, you can also use the dedicated hot colored buttons for each functions. - Green (Location) : Press and choose your location from the list of world-wide, and many country names in this list. Based on your selected location, corresponding contents list will be provided. - Blue (Category) : Press this blue button to view the list of categories, then choose the one you prefer to view the list of contents in the selected category.

on the front panel.  Check the main power cable and check that it is plugged into a suitable power outlet.  Check the STB main power switch ‘ON’ at the rear of the STB. No Picture  See ‘Does not display any message on the front panel’ above.  To match the STB system with your TV system (PAL/NTSC), press V.Format button until a picture is displayed.  Check the video output port is firmly connected to the TV or VCR.  Check that you have selected the Video Input on your TV.  Press the STB button on the remote to assure you are controlling the STB and no other device with the remote.  Check the brightness level of the TV.  Check the resolution that your TV supports, and set the proper resolution with the remote Resolution button to obtain a picture. Poor picture quality  See ‘No Picture’ above.  Check the signal level, if this is low then tries adjusting the alignment of your dish. No Sound  See ‘No Picture’ above.  Check the volume level of the TV and STB.  Check the Mute status of the TV and STB. Remote Control does not operate  Point remote control directly towards the STB.  Check that the STB button lights up when you press any button  Check and replace batteries. No or Bad Signal  Check the LNB ; Replace the LNB if necessary.  Check the cable from the LNB.  Check the position of the dish; realign dish if necessary.  If you are using a DiSEqC 1.0 switch, check that you have connected and programmed the LNBs to the correct connections on the switch.  Check the ‘Signal Level’ and the ‘Signal Quality’.

Input Connector Loop through out Frequency Range Input Impedance Signal Level LNB Power 22KHz Tone DiSEqC Control Demodulation Input Symbol Rate FEC Decoder F-type, IEC 169-24, Female F-type, IEC 169-24, Female 950MHz ~ 2150MHz 75Ω, unbalanced -65 to -25dBm 13/18VDC, max.400mA (22±2)KHz, (0.6±0.2)V V1.0/1.2/USALS Compatible QPSK / 8PSK 2 ~ 45 Ms/s(QPSK of DVB-S) 2 ~ 45 Ms/s(QPSK of DVB-S2) 2 ~ 35 Ms/s(8PSK of DVB-S2) 1/2, 2/3, 3/4, 5/6 and 7/8 with Constraint Length K=7(DVB-S) 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9 and 9/10 (DVB-S2/QPSK) 3/5, 2/3, 3/4, 5/6, 8/9, 9/10(DVB-S2/8PSK) MPEG Transport Stream A/V Decoding Transport Stream Profile Level Input Rate Video Formats Video Resolution Audio Decoding Audio Mode Sampling Rate H.264(MPEG-4 part 10, MPEG-4/AVC and H26L) MPEG-II ISO/IEC 13818-2/11172-2 MPEG-4/AVC MP@L4, MPEG-II MP@HL Max. 80Mbit/s 4:3 Letter Box, 4:3 PanScan, 16 : 9 720 x 576i, 720 x 576p, 720 x 480i, 720 x 480p 1280 x 720p, 1920 x 1080i, 1920 x 1080p(supports only HDMI) Dolby Digital, MPEG-1 Layer 1,2 and 3 Stereo/Joint stereo/Mono, Dolby Digital bitstream 32KHz, 44.1KHz and 48KHz(According to input) Main System Main Processor Memory STi chipset Flash-ROM : 32 Mbyte SDRAM : 256 Mbytes EEPROM : 256 bytes

TV SCART RCA OPTIC RS-232C USB Ethernet RGB, CVBS Video, Audio L, R Output Video & Audio Output Dolby Digital (SPDIF) 9 pin D-SUB (Male) type, Transfer rate 115Kbps USB 2.0 Host Front & Rear Support. (5V DC 500 mA Max.) RJ45 connector, 100 Mbps Front Panel Slot Display Buttons 1 USB 2.0 Host port 2 Common interface PCMCIA slot 1 Smart Card Slot 7-Segment 3 Buttons (Standby, CH UP/DOWN) Power Supply Input Voltage Type Power Consumption Protection AC 90 ~ 250V, 50/60Hz SMPS Max. 30W Separate Internal Fuse & Lighting protection Physical Specification Size (W x H x D) Weight (Net) Operating Temp. Storage Temp. 260mm X 43mm X 180mm 1.1 Kg 0°C ~ +45°C -10°C ~ +70°C

1. Key Table No KEY NAME TV DVD VCR 1 2 V 3 V V 4 V V V 5 V 6 V.Format 7 SLEEP 8 TV/RAD, Source V 9 Resolution 10 V V 11 V V 12 V V 13 V 14 V 15 V V 16 V V 17 V V 18 19 V 20 V 21 V 22 V 23 INFO 24 RECALL 25 MENU V V 26 EXIT V V 27 V V 28 V V 29 V V 30 V V 31 OK V V 32 33 FAV 34

53 No KEY NAME TV DVD VCR 35 VOL + V 36 VOL - V 37 CH + V V 38 CH - V V 39 EPG 40 41 42 43 44 0 V V V 45 1 V V V 46 2 V V V 47 3 V V V 48 4 V V V 49 5 V V V 50 6 V V V 51 7 V V V 52 8 V V V 53 9 V V V 54 55 56 REV1 57 REV2 58 REV3 59 REV4 60 REV5 61 REV6

r to ‘5.Multi-Brand IR Remote Controller Setting’ in the 16 page of this manual TV Brands Code ADMIRAL 050 134 AKAI 093 049 123 ALBA 068 ALBIRAL 116 ALCATEL 022 AMSTRAD 158 021 ANAM 155 156 157 ARC EN CIEL 028 039 043 145 081 ARISTONA 099 049 050 019 142 149 078 ARTHUR MARTIN 053 139 117 120 122 123 125 128 ASA 050 055 057 113 134 ATLANTIC 099 111 AUDIOSONIC 054 AUSIND 053 AUTOVOX 099 144 055 019 057 069 BAIRD 083 BASICLINE 006 BAUR 011 BEKO 023 049 BLAUPUNKT 094 100 102 111 114 BRANDT 028 039 040 043 145 081 BRION VEGA 050 BRUNS 048 050 BSR 059 110 132 BUSH 033 068 124 074 CENTURY 098 101 050 079 136 CGE 016 101 124 079 132 136 CIHAN 065 CLARIVOX 048 116 CONDOR 099 111 CONTEC 087 CONTINENTAL EDITION 028 039 040 043 145 081 CROSLEY 101 050 109 CROWN 147 CTC CLATRONIC 046

55 TV Brands Code DAEWOO 089 DECCA 099 060 063 115 118 DEGRAAF 036 DIXI 049 090 DRYNATRON 049 DUAL 099 141 DUAL-TEC 096 099 132 DUMONT 046 050 057 073 ELBE 016 116 ELBIT 065 ELCIT 046 097 103 050 109 127 132 ELMAN 046 132 ELTA 090 EMERSON 158 098 050 ERRES 049 142 EUROPHON 098 046 097 099 051 115 132 FERGUSON 146 040 041 150 057 061 116 149 FIDELITY 099 149 FINLUX 034 046 053 055 057 109 113 073 074 079 FISHER 015 048 050 052 109 136 FORGESTONE 149 FORMENTI 099 053 109 111 125 FORTRESS 137 FRABA 075 FRONTECH 054 FUJITSU 025 FUNAI 054 059 GBC 109 132 GEC 099 060 109 115 134 088 GELOSO 103 109 132 134 090 GOLDSTAR 092 003 017 099 049 075 076 077 090 152 GOODMANS 033 049 060 077 GORENJE 066 136 GREATZ 001 058 109 122 123 128 129 130 134

56 TV Brands Code GRANADA 033 099 049 058 060 142 115 125 134 GRUNDIG 094 100 057 058 108 112 114 082 204 206 212 217 222 239 HANSEATIC 033 047 099 049 109 139 111 HANTAREX 097 HEMMERMANN 127 HIFIVOX 028 039 043 145 081 HINARI 158 033 045 143 090 HITACHI 014 033 034 036 099 145 056 109 139 110 067 117 132 134 084 091 081 088 HYPER 093 099 IMPERIAL 016 101 124 079 132 133 INGELEN 001 058 109 122 128 129 130 134 INKEL 000 INNO HIT 093 098 097 099 143 077 090 INTERFUNK 047 049 050 145 058 109 142 123 128 129 091 IRRADIO 093 143 053 077 090 ITT 001 140 058 105 109 122 123 128 148 129 130 134 135 083 089 JVC 033 154 209 213 229 231 235 KTV 099 KAISUI 006 KARCHER 006 KENDO 098 KENNEDY 144 019 109 KORTING 050 059 111 KRIESLER 099 049 050 019 142 149 078 LENOIR 099 LG 202 205 207 213 218 219 220 222

57 TV Brands Code LOEWE OPTA 008 097 047 049 050 115 072 LOGIK 118 149 LUMA 049 120 134 LUXOR 058 139 117 120 123 129 135 083 McMICHAEL 088 MEMOREX 090 MAGNAFON 046 097 099 051 053 115 MARANTZ 049 MATSUI 158 099 106 060 118 068 134 090 MAGNADYNE 046 097 103 050 109 115 127 132 METZ 094 050 114 133 200 239 MINERVA 094 100 057 058 114 MISTRAL 149 MITSUBISHI 033 035 047 049 050 062 118 119 148 080 138 MIVAR 097 099 115 077 MULTITECH 046 099 115 136 MURPHY 134 MAONIS 096 144 019 110 134 NATIONAL 042 104 109 NEC 033 085 NECKERMANN 099 050 139 120 136 NEI 049 NIKKAI 060 NOBLEX 015 NOBLIKO 098 046 099 053 057 NOGAMATIC 028 039 043 145 081 NOKIA 001 140 058 105 109 122 123 128 148 129 130 134 135 083 089 NORDMENDE 028 032 039 043 145 131 091 081 OCEANIC 109 064 123 ONCEAS 099 OPTONICA 137

58 TV Brands Code ORION 158 059 118 068 127 090 OSAKI 060 OSIO 077 OSUME 087 OTTO VERSAND 033 047 049 109 139 P.T ACTTRON 065 PAEL 099 053 PANASONIC 030 042 095 104 107 109 121 126 208 214 217 223 230 231 PATHE CINEMA 099 111 116 132 PERDIO 060 PHILCO 016 030 101 050 109 124 079 132 136 PHILIPS 009 010 013 018 024 099 049 050 019 142 148 149 078 088 200 202 211 212 213 219 225 226 227 233 237 238 231 PHOENIX 099 053 109 111 125 PHONOLA 099 049 050 019 142 149 078 PIONEER 020 049 145 091 PRANDONI-PRINCE 098 097 053 115 134 PREMIER 124 PRINCE 098 097 053 134 PROTECH 049 054 PYE 099 049 050 019 142 148 149 078 QUASAR 046 097 051 053 077 QUELLE 047 099 100 049 053 055 057 058 111 112 113 114 118 123 073 074 128 RADIOLA 099 049 050 019 142 149 078 RADIOMARELLI 046 097 103 050 109 062 127 132 RANK 074 RBM 074 REDIFFUSION 062 123 134

59 TV Brands Code REX 096 144 019 141 110 069 134 ROBOTRON 048 050 RTF 048 050 SABA 028 031 032 037 039 040 043 097 050 145 115 120 086 091 081 SAISHO 158 099 118 119 068 090 SALORA 053 139 117 120 122 123 125 128 135 083 SAMBERS 046 097 051 053 115 077 SAMPO 121 SEG 046 SEI 158 059 SAMSUNG 015 026 099 054 077 136 090 151 153 201 202 203 205 210 213 215 220 222 226 228 231 232 238 234 SANYO 001 002 005 033 044 048 060 113 118 071 054 136 SBR 049 142 148 149 088 SCHAUB LORENZ 001 058 109 122 123 128 129 130 134 SCHNEIDER 096 099 049 050 052 019 141 109 142 125 149 078 132 SELECO 016 096 144 019 141 110 069 134 SHARP 033 087 137 209 223 224 SIAREM 046 097 050 109 115 SICATEL 116 SIEMENS 005 094 036 100 111 114 087 SIERA 099 049 050 019 142 149 078 SILVER 054 SINGER 016 046 050 109

60 TV Brands Code SINUDYNE 158 046 050 059 109 127 SONOKO 049 090 SONY 146 007 027 033 038 118 203 205 209 210 STERN 096 144 019 110 069 134 TANDBERG 133 TANDY 099 060 137 TASHIKO 002 033 TATUNG 099 060 063 065 115 118 TEC 096 099 132 TELEAVIA 028 039 040 043 145 091 081 TELEFUNKEN 028 041 145 150 086 091 TELETECH 090 TELEVIDEON 099 053 109 111 125 TENSAI 049 TOSHIBA 004 016 033 070 074 206 209 224 232 TRANS CONTINENTS 098 097 053 134 THOMSON 012 028 032 039 040 043 145 091 081 THORN-FERGUSON 014 040 041 054 150 057 061 116 149 086 TOCOM 029 TRIUMPH 158 UHER 052 111 125 ULTRA VOX 098 046 099 050 109 120 UNIVERSUM 092 034 054 077 UNIVOX 116 VEGAVOX 079 VOXSON 050 134 WATSON 111 WATT RADIO 046 099 051 109 116 127 WEGA 033 WHITE WESTINGHOUSE 099 111 YOKO 099

VCR Brands Code AKAI 122 133 142 152 132 ALBA 108 120 AMSTRAD 111 ANITSCH 109 ARC EN CIEL 142 156 152 ARISTONA 145 131 ASA 118 AWIA 111 142 BAIRD 142 133 BAUER. BOSCH 114 143 BRIONVEGA 141 BUSH 108 120 BLAUPUNKT 114 143 155 131 154 140 BRANDT ELECTRONIQUE 142 156 152 C.EDISON 141 CANON 114 CAPEHART 120 CGE 111 142 152 CONTINENTAL EDISON 142 156 152 CRAIG 100 113 CURTIS MATHES 119 DAEWOO 101 120 121 DAYTRON 120 DECCA 111 142 DEGRAAF 103 106 111 145 118 DUAL 142 152 DUMONT 103 111 118 DYNATECH 111 EMERSON 102 110 111 119 125 FERGUSON 142 159 130 152 134 136 FIDELITY 111 FINLANDIA 103 118 FINLUX 103 106 111 118 FISHER 100 103 105

63 VCR Brands Code FUNAI 111 GE 119 GENERAL 114 GOLDSTAR 104 162 GOODMANS 108 111 146 GRAETZ 141 142 156 150 152 138 GRANADA 103 105 118 GRUNDIG 114 143 118 155 131 153 154 HANSEATIC 143 HARMAN-KARDON 104 HIFIVOX 142 156 152 HINARI 102 108 124 127 HITACHI 106 107 111 142 157 IMPERIAL 111 INGELEN 142 156 152 138 INGERSOL 127 ITT 105 141 142 156 150 152 133 138 JENSEN 142 JVC 142 156 160 130 152 163 KENWOOD 105 142 160 KRIESLER 145 131 KUBA 143 LLOYD 111 LOEWE OPTA 114 118 129 131 LOGIK 108 127 LUXOR 133 138 MAGNADYNE 141 MAGNASONIC 138 MAGNAVOX 119 MARANTZ 104 114 146 118 131 MATUI 110 125 127 MEMOREX 100 103 105 111 145 METZ 114 143 131 154 137

64 VCR Brands Code MGA 117 MINERVA 155 154 MINOLTA 106 107 MITSUBISHI 160 117 149 MTC 111 113 MULTITECH 108 111 MURPHY 111 NAONIS 142 156 152 NATIONAL 140 NEC 104 142 160 152 NECKERMANN 102 141 114 142 152 NOGAMATIC 142 156 152 NOKIA 103 105 141 142 156 150 152 133 138 NORDMENDE 139 142 156 152 153 135 OPTONICA 145 146 ORION 102 110 125 127 OSAKI 111 OTTO VERAND 143 P. CINEMA 114 PALLADIUM 141 114 PANASONIC 123 151 140 PATHE MARCONI 142 156 152 PENTAX 106 107 PERDIO 111 PHILIPS 112 114 145 146 118 129 131 PHONOLA 114 145 118 129 131 PIONEER 160 PORTLAND 120 PROLINE 111 PYE 114 145 118 129 131 QUARTZ 105 QUELLE 102 144 154 RADIOLA 145 131 RADIOMARELLI 141

65 VCR Brands Code RCA 119 REALISTIC 100 103 105 111 113 145 146 REX 142 156 152 SABA 139 142 156 152 135 SAISHO 102 110 125 127 SALORA 105 117 SAMSUNG 113 119 132 161 SANSUI 142 160 SANYO 100 103 105 125 138 SBR 118 129 SCHAUB LORENZ 141 142 156 150 152 138 SCHNEIDER 108 111 145 131 SEI-SINUDYNE 127 SELECO 142 156 152 SENTRA 120 SHARP 145 146 1105 148 SHINTOM 108 SIEMENS 114 143 155 131 154 138 SIERA 145 131 SINUDYNE 127 SONY 144 115 116 126 128 STERN 142 156 152 STS 106 SUNKAI 125 SYLVANIA 111 117 SYMPHONIC 111 117 TASHIKO 111 TATUNG 111 142 TEAC 111 142 TEKNIKA 111 TELEAVIA 142 156 152 TELEFUNKEN 142 156 152 TENOSAL 108 THOMSON 142 156 152

66 VCR Brands Code THORN-FERGUSON 139 142 159 130 152 134 136 TOSHIBA 101 142 156 117 158 152 TOTELEVISION 113 UHER 142 ULTRA VOX 141 UNITECH 113 UNIVERSUM 141 114 143 URANYA 141 VECTOR 104 VICTOR 142 160 VIDITAL 141 WESTING HOUSE 141 WARDS 119 YAMAHA 104 142 ZANUSSI 142 156 152 ZENDER 152 ZOPPAS 142 156

DVD Brands Code AIWA 002 AKAI 007 044 ALBA 036 ANAM 074 ANSONIC 152 AMES 051 APEX 003 011 025 037 039 044 047 048 054 040 AUDIOSONIC 044 A-TREMD 061 BROKSONIC 000 BULE SKY 158 036 BUSH 067 044 000 152 CAT 036 CLASSIC 051 CELESTIAL 158 CENTREX 158 CINEULTRA 036 CONIA 158 COMBRIDGE AUDIO 088 CROWN 044 CYBERCOM 152 CYBERRHOME 061 DAEWOO 005 045 052 DAEWOO INTERNATIONAL 036 DEC 036 DENON 041 050 DENVER 036 DENZEL 083 DIGITREX 011 158 DIK 152 DK DIGITAL 152 DRAGON 152 DUAL 083 152 ELTA 004 010 044 ENZER 083 EMERSON 013 019 032 067 FISHER 015 FUNAI 019 032 GE 044 062 GOLDSTAR 013 067 GOLEMANS 044 GO-VIDEO 012 016 021

68 DVD Brands Code GRADIENTE 008 HARMAN/KARDON 023 HITEKER 011 158 HOHER 152 HITACHI 001 035 004 070 067 083 INTEGRA 057 JEKEN 036 JVC 014 028 067 KENWOOD 036 041 KENDO 036 KISS 083 KLH 044 KONKA 042 049 056 063 KOSS 008 LASONIC 006 LECSON 088 LENCO 036 152 LENOXX 044 NEXIA 036 LIFETEC 152 LG 013 072 067 059 LUXMAN 004 070 MAGNAVOX 026 027 MARANTZ 013 026 027 MDS 036 MEDION 152 MEMOREX 018 MICROSOFT 020 MICROSTAR 152 MINTEK 044 MITAUBISHI 055 MONYKA 083 MUSTEK 051 NAD 013 065 NAKAMICHI 058 NORDMENDE 152 MBO 044 NEUFUNK 083 ONKYO 056 OMNI 044 036 OPTIMUS 001 ORITRON 008 PALSONIC 158 067 PANASONIC 041 068

69 DVD Brands Code PACIFIC 018 152 PHILIPS 026 027 064 045 PHONOTREND 036 PIONEER 001 PROLINE 008 158 085 PROSCAN 062 PROSONIC 036 RADIOSHACK 038 066 067 RAITE 083 REC 067 REOC 053 REVOY 036 RCA 038 044 062 066 067 ROADSTAR 067 044 036 ROTEL 067 SAMSUNG 012 021 070 071 SAMPO 022 SANSUI 000 SANYO 015 SCOTT 158 SEG 029 083 SILVASCHNEIDER 152 SHARP 020 067 SHANGHAI 158 SHERWOOD 009 073 SHINCO 044 SINGER 044 SM ELECTRONIC 044 SONY 033 034 004 070 SOUNDWORKS 088 SYLVANIA 019 032 SYLMPHONIC 019 032 SVA 158 TEAC 001 067 TECHNICS 041 068 TEASAI 044 TEVION 018 031 046 053 060 THETA DIGITAL 001 TOSHIBA 000 017 024 026 TOKAI 083 UMAX 044 UNITED 035 UNIVERSUM 067 VOXSON 152 WELKIN 152

70 DVD Brands Code WESDER 036 WHARFEDALE 059 085 088 WINDY SAM 040 070 XMS 067 YAMAHA 041 043 YAMAKAWA 030 083 ZENITH 068 013 069 067