Lambda 2U GENESYS 5kW Technical Manual

2U GENESYSTM 5kW Programmable DC Power Supplies Document: 83-515-000 Rev A LAMBDA AMERICAS 405 Essex Road, Neptune, NJ 07753 Tel: (732) 922-9300 Fax: (732) 922-9334 Web: www.lambda-emi.com ...

FOR UNITS EQUIPPED WITH “IEMD” OPTION, ALSO REFER TO MANUAL 83-030-200 IEMD. ...

WARRANTY……………………………………………………………………………………………. Pg. 1 SAFETY INSTRUCTIONS…………………………………………………………………………….. Pg. 2 GERMAN SAFETY INSTRUCTIONS………………………………………………………………… Pg. ...

3.8.8 Address setting……………….…………………………………………………………….. Pg. 18 3.8.9 Baud rate setting……………………………………………………………………………. Pg. 18 3.9 CONNECTING THE LOAD…………………………………………………………� ...

5.15.1 Basic parallel operation…………………………………………………………………….. Pg. 42 5.15.2 Advanced parallel operation……………………………………………………………….. Pg. 42 5.16 DAISY-CHAIN SHUT-OFF CONNECTION……………………………………………………. ...

7.10.6 Status Control Commands………………………………………………………………... Pg. 63 7.11 STATUS, ERROR AND SRQ REGISTERS…………………………………………………… Pg. 63 7.11.1 General Description………………………………………………………………………. Pg. ...

2 SAFETY INSTRUCTIONS CAUTION The following safety precautions must be observed during all phases of operation, service and repair of this equipment. Failure to comply with the safety precautions or warnings in this document violates safety standards of design, manufacture and intended use of this equipment and may impair the built-in prote ...

3 SAFETY INSTRUCTIONS ENVIRONMENTAL CONDITIONS The GenesysTM power supply series safety approval applies to the following operating conditions: *Indoor use *Ambient temperature: 0°C to 50°C *Maximum relative humidity: 90% (no condensation) *Altitude: up to 3000m *Pollution degree 2 Do not use this product in environments with strong Elect ...