LawnMaster CLGT1018B Operator's Manual
Read Online
Read the LawnMaster CLGT1018B Operator's Manual online using the built-in PDF viewer.
Text of the manual
18V-10" Li-On Cordless Grass Trimmer
Read all safety rules and instructions carefully before operating this tool.
Distributed By Cleva North America 601 Regent Park Court Greenville, SC 29607 (866)-384-8432
CLGT1018B
Operators Manual
EN p. 2
Capacity Battery Pack
Voltage Battery Pack
Type Battery Pack
Rated No Load Speed No
Cutting Device
Cutting Width 10"
Weight (With Battery) 5.5 Lbs
2
Contents 2
Product Specifications 2
General Safety Rules 3-4
Electrical Information 5
Symbols 6
Know Your Cordless Grass Trimmer 7
Assembly 8-12
Operation 13-18
Maintenance 19
Troubleshooting 20
Warranty 21
Exploded View 22
Parts List 23
Notes 24
CONTENTS
PRODUCT SPECIFICATIONS
18V-10" Li-On Cordless Grass Trimmer
Model No.: 18lc01-etl
Rated Input Voltage
Rated Output Voltage
Rated Output Current
Charging Time
1.5 Ah
18 V d.c.
Li-Ion
8500 min-1
Plastic blade
Charger
120 V~, 60 Hz
20.8 V
1.85 A
approx. 1 h
GENERAL SAFETY RULES
WARNING
Read and understand all instructions before using this product. Failure to follow all
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
Do not allow children or untrained individuals to use this unit.
Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
Do not handle plug or tool with wet hands.
Never allow children to operate the equipment. Never allow adults to operate the equipment
without proper instruction.
Always wear safety glasses with side shields. Everyday glasses have only impact resistant
lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury. Use
face mask if operation is dusty.
Wear eye protection when operating this product. Secure long hair above shoulder level to
prevent entanglement in moving parts.
Do not expose to rain, store indoors.
Do not operate in poor lighting.
Keep all parts of your body away from any moving part.
Wear heavy long pants, boots, and gloves. Avoid loose garments or jewelry that could get
caught in moving parts of the machine or its motor.
Do not force tool. Use the correct tool for your application. The correct tool will do the job
better and safer at the rate for which it is designed.
Do not operate the equipment while barefoot or when wearing sandals or similar lightweight
footwear. Wear protective footwear that will protect your feet and improve your footing on
slippery surfaces.
Secure long hair so it is above shoulder level to prevent entanglement in any moving parts.
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
Keep all bystanders, children, and pets at least 50 ft. away.
medication.
Do not operate in poor lighting.
GENERAL SAFETY RULES
Keep all parts of your body away from any moving parts and all hot surfaces of the unit.
Do not put any object into openings. Do not use with any opening blocked; keep openings free
Check the work area before each use. Remove all objects such as rocks, broken glass, nails,
wire, or string which can be thrown or become entangled in the machine.
Use only identical manufacturer’s replacement parts and accessories. Use of any other parts
may create a hazard or cause product damage.
Do not charge battery tool in rain, or damp or wet location. Following this rule will reduce the
risk of electric shock.
For household use only.
Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards when not using your battery tool or when
personal injury.
Remove or disconnect battery before servicing, cleaning or removing material from the
gardening appliance.
Use only this type and size batteries provided by us.
Store idle appliances - When not in use, blower should be stored indoors in a dry, locked
place out of the reach of children.
possible special disposal instructions.
Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if swallowed.
explosion and possibly injury.
Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce
the risk of serious personal injury, never use any cordless product in the presence of open
immediately.
Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has
been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly
dispose of a dropped or damaged battery immediately.
Exercise care in handling batteries in order not to short the battery with conducting materials
such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.
Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if swallowed.
For best results, your battery tool should be charged in a location where the temperature is
more than 50°F but less than 100°F. To reduce the risk of serious personal injury, do not store
outside or in vehicles.
Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in
contact with your skin, wash immediately with soap and water, then neutralize with lemon juice
then seek immediate medical attention. Following this rule will reduce the risk of serious
personal injury.
If the power supply cord is damaged, it must be replaced only by the manufacturer or by an
authorized service center to avoid risk.
Do not point the blower nozzle in the direction of people or pets.
Never run the unit without the proper equipment attached. Always ensure the sweeper tubes
are installed.
When not in use, blower should be stored indoors in a dry, locked up place—out of the reach
of children.
Maintain tool with care. Keep fan area clean for best and safest performance. Follow
unplugging it.
To reduce the risk of electrical shock, do not expose to rain, do not use on wet surfaces. Store
indoors.
Save these instructions. Refer to them frequently and use them to instruct others who may
use this power tool. If you loan someone this power tool, loan them these instructions also.
W A R N I N G (PROPOSITION 65)
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending on how often you do this type of
work. To reduce your exposure to these chemicals, work in a well-ventilated area, and work with
particles.
CHILD SAFETY
Tragic accidents can occur if the operator is not aware of the presence of children.
Keep children out of the working area and under the watchful care of a responsible adult.
Do not allow children under the age of 14 to operate this hedger. Children who are 14
years of age and older must read and understand the operating instructions and safety
rules in this manual and must be trained and supervised by a parent.
Stay alert, and turn the hedger off if a child or any other person enters the working area.
Look behind and down for small children before and while cutting backwards.
Use extreme care when approaching blind corners, doorways, shrubs, trees, or other
objects that may obscure your view of a child who may run into the path of the hedger.
On the product, the rating label and within these instructions you will find among others he following
symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries
and damage to property.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watts
Power
min
Minutes
Time
Alternating Current
Type of current
Direct Current
Type or a characteristic of current
No Load Speed
Rational speed, at no load
/min
Per Minute
Revolutions, strokes, surface speed, orbits etc.,
per minute
Wet Conditions Alert
Do not expose to rain or use in damp locations
Read The Operator’s Manual
To reduce the risk of injury user must read and
understand operator’s manual before using this
product.
Eye Protection
Wear eye protection when operating
this equipment.
Safety Alert
Precautions that involve your safety.
Long Hair
Failure to keep long hair away from the air inlet
could result in personal injury.
Loose Clothing Failure to keep loose clothing from being drawn
into air intake could result in personal injury.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
KNOW YOUR CORDLESS GRASS TRIMMER
KNOW YOUR PRODUCT
The safe use of this product requires an understanding of the information on the product and in
this operator’s manual as well as a knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules.
1. Main handle
2. Rear safety guard
3. On/off switch
4. Unlock button
5. Battery pack
6. Auxiliary handle
7. Storage compartment
8. Quick release knob
9. Handle support
10. Angle adjustment button
11. Locking sleeve (length adjustment)
12. Telescopic pole
13. Tilt adjust pivot point
All reference numbers above are used throughout the manual to indicate an action.
14. Safety guard
15. Mounting screws (pre-assembled)
16. Cutting device (TrimFast Blades)
17. Flower Guard
18. Air vents
19. Trimmer head
20. Power cord with plug
21. Charger
22. Indicator lights (charger)
23. Release button
24. Button for battery capacity
25. Indicator lights (battery pack)
1
2 3
4
5
6
78
9
10
11
12
13
14
15
16
17
18
19
22
20
21
23
24
25
All referenced numbers are indicated on page 7.
Attaching Guard (See fig. 1)
Fig.1
Align the guard (14) with the trimmer head (19).
Secure it by tightening the three mounting screws (15) with a screwdriver (Fig. 1).
WARNING! Never use the product without the guard properly fitted.
/RRVHQWKHTXLFNUHOHDVHNQREDQWLFORFNZLVHDQGUHPRYHLWIURPWKHDX[LOLDU\KDQGOH
$OLJQWKHDX[LOLDU\KDQGOHZLWKWKHKDQGOHVXSSRUW0DNHVXUHWKHVWRUDJHFRPSDUWPHQW
(7) faces upward.
,QVHUWLQWKHTXLFNUHOHDVHDQGWLJKWHQFORFNZLVHE\KDQG
Attaching and Adjusting Auxiliary Handle (See figs. 2-7)
Fig.2
Fig.3
Attaching or Replacing TrimFast Blade (See figs. 9-11)
Fig.9
Fig.10
Fig.7
Fig.8
3ODFHWKHZLGHUH\HOHWRIFXWWLQJEODGHRYHUWKHPHWDOVWXGDQGILUPO\SXOOXQWLOEODGHLVFRPSOHWHO\
seeded on stud.
5HPRYHLQRSSRVLWHRUGHU
NOTE! Only tighten the quick release knob so that it is possible to clamp the lever down with light
pressure. If the lever cannot be clamped, slightly loosen the quick release knob. If the lever can be
clapped without resistance, tighten the quick release knob.
Fig.11
Fig.4
Fig.5
Fig.6
Store the TrimFast cutting blades in the (16) storage compartment (7) found on the auxiliary
handle (6).
Storage of cutting device (See fig. 12)
NOTE: This kind of trimming blade can be used from two sides. For the first replacemen turn the
blade over and refit it. If both sides of a blade are worn out, replace with a new blade.
3UHVVWKHUHOHDVHEXWWRQRQWKHEDWWHU\SDFNDQGUHPRYHLWIURPWKHSURGXFW)LJ
$OLJQWKHEDWWHU\SDFNWRWKHVORWVDWWKHERWWRPVLGHRIWKHUHDUVDIHW\JXDUGDQGVOLGHLWLQ
until it locks in place (Fig. 14).
Attaching and Removing the Battery Pack (See figs. 13-14)
Fig.12
Fig.13
Fig.14
before first use.
$OLJQWKHEDWWHU\SDFNWRWKHVORWVRQWKHFKDUJHUDQGVOLGHLWLQXQWLOLWORFNVLQSODFH
(Fig. 15, 16).
&RQQHFWWKHFKDUJHUWRWKHSRZHUVXSSO\
$OORZVXIILFLHQWFKDUJLQJWLPHVHHWHFKQLFDOGDWDDQGWKHQGLVFRQQHFWWKHFKDUJHUIURPWKH
power supply.
3UHVVWKHUHOHDVHEXWWRQRQWKHEDWWHU\SDFNDQGUHPRYHLWIURPWKHFKDUJHU
Charging the Battery Pack (See figs. 15-16)
Fig.15
WARNING! Always remove the battery pack from the product for charging! Charge
in a safe location away from moisture, heat or any hazard to the charger or other danger!
NOTE: It is normal for the battery pack and charger to become warm (but not hot) during
charging process. If the battery does not charge properly, check to make sure the electrical outlet
is "live".
NOTE: Always charge the battery before storage! To reduce risk of fire, never leave the battery
connected with the charger for more than 24 hours!
WARNING! Check the voltage! The voltage must comply with the information on the
rating label!
Fig.16
Battery LED Indicators (See figs. 17-18)
Starting And Stopping
0DNHVXUHWKHRQRIIVZLWFKLVLQLWVRIISRVLWLRQ
$WWDFKWKHEDWWHU\SDFNWRWKHSURGXFW(QVXUHLWVQDSVLQSODFH
On/off Switch (See fig. 19)
3UHVVWKHXQORFNEXWWRQRQHLWKHUVLGHDQGKROGLWLQSRVLWLRQ
3UHVVWKHRQRIIVZLWFKWRVZLWFKWKHSURGXFWRQ)LJ
5HOHDVHWKHRQRIIVZLWFKWRVZLWFKWKHSURGXFWRII
This grass trimmer CLGT1018B is with rated battery voltage of 18 V . 18LC01-ETL designates
the respective charger with a charging voltage of 20.8 V .
The product is intended for cutting weed, grass or similar soft vegetation in areas that are hard to
reach, e.g. under bushes, on slopes and edges. It may not be used to work on unusual thick, dry or
wet grass, e.g. pasture grass, or to shred leaves.
This product is intended for private domestic use only, not for any commercial trade use. It must not
be used for any purposes other than those described.
Fig. 19
4
3
Adjusting Shaft Length (See figs. 20-21)
Adjust the length to suit your height. We recommend always using the product with the pole fully
extended (12).
/RRVHQWKHORFNLQJVOHHYHLQDQDQWLFORFNZLVHGLUHFWLRQ
3XOOWKHWHOHVFRSLFSROHWRGHVLUHGOHQJWK
7LJKWHQWKHORFNLQJVOHHYHLQDFORFNZLVHGLUHFWLRQ
Fig. 20
fully extended
Fig. 21
Retracted
Adjust the angle of the trimmer head (19) according to the intended operation.
3XOOWKH$QJOHDGMXVWPHQWEXWWRQEDFNZDUGDQGKROGLWLQSRVLWLRQ)LJ
$GMXVWWRGHVLUHGSRVLWLRQ$GMXVWWRZKHQWULPPLQJJUDVVRQIODWJURXQG)LJ$GMXVWWR
90° or 180° when trimming near edges and walls (Fig. 23, 24).
Adjusting Power Head Angle (See figs. 22-24)
Adjust the trimmer head (19) to a suitable angle (Fig. 25-27). The joint has several snap-in
positions between 0° and 90°.
With guard on ground, place foot on top of guard, adjust tilt by pushing either up or down on the
shaft to tilt.
Power Head Tilt Adjustment (See figs. 25-27)
(QVXUHWKDWWKH$QJOHDGMXVWPHQWEXWWRQVQDSVLQSODFH
Fig. 25
Fig. 26
Fig. 27
0°
90°
WARNING! Always ensure that the Angle adjustment button snaps in place! Only adjust
to indicated angles! Never adjust to any other intermediate position.
Fig. 24, 180°
Fig. 22, initial position 0°
Fig. 23, 90°
Flower Guard (See figs. 28-29)
Use the yoke to keep distance to obstacles that could be hit by the cutting device.
Ɣ3XVKWKH)ORZHU*XDUGWRLWVRXWHUSRVLWLRQIRURSHUDWLRQXQWLOLWVQDSVLQWRSODFH)LJ
Ɣ3XVKWKH)ORZHU*XDUGWRLWVLQQHUSRVLWLRQDIWHURSHUDWLRQDQGZKHQVWRULQJ)LJ
Ɣ&KHFNWKHSURGXFWLWVEDWWHU\SDFNDQGFKDUJHUDVZHOODVDFFHVVRULHVIRUGDPDJHEHIRUHHDFK
use. Do not use the product if it is damaged or shows wear.
Ɣ'RXEOHFKHFNWKDWDFFHVVRULHVDQGWULPPLQJEODGHVDUHSURSHUO\IL[HG
Ɣ$OZD\VKROGWKHSURGXFWE\LWVKDQGOHV.HHSWKHKDQGOHVGU\WRHQVXUHVDIHVXSSRUW
Ɣ(QVXUHWKDWWKHDLUYHQWVDUHDOZD\VXQREVWUXFWHGDQGFOHDU&OHDQWKHPLIQHFHVVDU\ZLWKDVRIW
brush. Blocked air vents may lead to overheating and damage the product.
Ɣ6ZLWFKWKHSURGXFWRIILPPHGLDWHO\LI\RXDUHGLVWXUEHGZKLOHZRUNLQJE\RWKHUSHRSOHHQWHULQJ
the working area. Always let the product come to complete stop before putting it down.
Ɣ'RQRWRYHUZRUN\RXUVHOI7DNHUHJXODUEUHDNVWRHQVXUH\RXFDQFRQFHQWUDWHRQWKHZRUNDQG
have full control over the product.
General Operation
Trimming
Ɣ'RQRWFXWZHWJUDVVEHFDXVHLWWHQGVWRVWLFNWRWKHFXWWLQJPHDQVDQGJXDUGSUHYHQWVSURSHU
discharge of grass clippings, and could cause you to slip and fall.
Ɣ:DLWXQWLOWKHSURGXFWKDVFRPHWRDVWDQGVWLOOEHIRUHSODFLQJLWGRZQ
Ɣ5HJXODUO\UHPRYHFOLSSLQJVDQGGLUWDURXQGWKHWULPPHUKHDGZLWKDVZLWFKHGRIISURGXFW
Fig. 28, working position
Fig. 29 , storing position
WARNING! Adjust the Flower Guard position only when the product is switched off and
the cutting device is at a complete stop!
sensitive bark, and damage fence posts.
Ɣ:RUNUK\WKPLFDOO\6WDQGILUPO\ZLWK\RXUIHHWDSDUW&XWIURPULJKWWROHIWVRWKHWULPPLQJVZLOOEH
thrown away from the work area (Fig. 30).
Ɣ'RQRWPRYHWKHSURGXFWWRRIDVWDVWKLVZLOOUHVXOWLQLQHIIHFWLYHFXWWLQJDQGSRVVLEOHGDPDJH
Ɣ&XWUHSHDWHGO\IURPXSDQGGRZQLQOD\HUVZKHQWKHJUDVVLVYHU\KLJK)LJ
Ɣ.HHSWKHWULPPHUKHDGDWDQDQJOHRIDERXWWRWKHJURXQGZKHQWULPPLQJ$YRLGSUHVVLQJLW
against the ground as this can ruin the lawn and damage the product (Fig. 33).
Fig.32
Fig.31
Fig.30
17
OPERATION
Ɣ$GMXVWWKHWULPPHUKHDGDQJOHZKHQWULPPLQJRQHGJHV
8VHWKH)ORZHU*XDUGWRDYRLGEULQJLQJWKHFXWWLQJGHYLFHLQWRFRQWDFWZLWKKDUGREMHFWVVXFKDV
ZDOOVDQGFXUEV)LJ
Ɣ&DUHIXOO\PDQRHXYUHWKHSURGXFWDURXQGREMHFWVVXFKDVWUHHVDQGEXVKHVHQVXULQJLWGRHV
QRWFRPHLQWRFRQWDFWZLWKWKHP8VHWKH)ORZHU*XDUGWRHQVXUHWKDWWKHFXWWLQJGHYLFHGRHV
QRWFRPHLQWRFRQWDFWZLWKVHQVLWLYHSODQWV)LJ
NOTE: /HWWKHFXWWLQJGHYLFHGRWKHZRUN/HWLWZRUNDWLWVRZQSDFHQHYHU
IRUFHLWLQWRWKHDUHDWREHFXW
Fig. 33
Fig. 34
17
Fig. 35
18
OPERATION
Ɣ6ZLWFKWKHSURGXFWRIIUHPRYHWKHEDWWHU\EDFNDQGOHWLWFRROGRZQ
Ɣ&KHFNFOHDQDQGVWRUHWKHSURGXFWDVGHVFULEHGEHORZ
NOTE: 'RQRWXVHFKHPLFDODONDOLQHDEUDVLYHRURWKHUDJJUHVVLYHGHWHUJHQWV
RUGLVLQIHFWDQWVWRFOHDQWKLVSURGXFWDVWKH\PLJKWEHKDUPIXOWRLWVVXUIDFHV
After Use
Ɣ.HHSWKHJXDUGFOHDQDQGIUHHRIGHEULV5HPRYHWULPPLQJV
Ɣ5HSODFHWKHJXDUGZLWKDRQHRIWKHVDPHW\SHZKHQLW¶VZRUQRUVKRZVGDPDJH
Ɣ&OHDQWKHSURGXFWZLWKDGU\FORWK8VHDEUXVKIRUDUHDVWKDWDUHKDUGWRUHDFK
Ɣ,QSDUWLFXODUFOHDQWKHDLUYHQWVDIWHUHYHU\XVHZLWKDFORWKDQGEUXVK
Ɣ5HPRYHVWXEERUQGXVWZLWKKLJKSUHVVXUHDLUPD[EDU
Ɣ&KHFNIRUZRUQRUGDPDJHGSDUWV5HSODFHZRUQSDUWVDVQHFHVVDU\RUFRQWDFWDQDXWKRULVHG
VHUYLFHFHQWUHIRUUHSDLUEHIRUHXVLQJWKHSURGXFWDJDLQ
Ɣ.HHSWKHFXWWLQJGHYLFHFOHDQDQGIUHHRIGHEULV5HPRYHWULPPLQJV
Ɣ5HSODFHWKHFXWWLQJGHYLFHZLWKDRQHRIWKHVDPHW\SHZKHQLW¶VZRUQRUVKRZVGDPDJH
General Cleaning
Cutting Device
Charger
Guard
Ɣ,IWKHSRZHUFRUGRIWKHFKDUJHULVGDPDJHGLWPXVWEHUHSODFHGE\WKHPDQXIDFWXUHULWVVHUYLFH
DJHQWRUVLPLODUO\TXDOLILHGSHUVRQVLQRUGHUWRDYRLGDVDIHW\KD]DUG
WARNING!:HDUVDIHW\JORYHVZKHQZRUNLQJRQWKHFXWWLQJGHYLFH
DQGFORVHWRLW8VHDSSURSULDWHWRROVWRUHPRYHGHEULVHJDEUXVKRU
ZRRGHQVWLFN1HYHUXVH\RXUEDUHKDQGV
19
Ɣ7KLVSURGXFWGRHVQRWFRQWDLQDQ\SDUWVWKDWFDQEHUHSDLUHGE\WKHFRQVXPHU
&RQWDFWDTXDOLILHGVSHFLDOLVWWRKDYHLWFKHFNHGDQGUHSDLUHG
MAINTENANCE
Repair
Ɣ&OHDQWKHSURGXFWDVGHVFULEHGDERYH
Ɣ6WRUHWKHSURGXFWDQGLWVDFFHVVRULHVLQDGU\IURVWIUHHSODFH
Ɣ$OZD\VVWRUHWKHSURGXFWLQDSODFHWKDWLVLQDFFHVVLEOHWRFKLOGUHQ7KHLGHDOVWRUDJHWHPSHUD
WXUHLVEHWZHHQDQGGHJUHHV)
Ɣ:HUHFRPPHQGXVLQJWKHRULJLQDOSDFNDJHIRUVWRUDJHRUFRYHULQJWKHSURGXFWZLWKDVXLWDEOH
FORWKWRSURWHFWLWDJDLQVWGXVW
Storage
Ɣ6ZLWFKWKHSURGXFWRIIDQGUHPRYHWKHEDWWHU\SDFNEHIRUHWUDQVSRUWLQJLWDQ\ZKHUH
Ɣ$WWDFKWUDQVSRUWDWLRQJXDUGVLIDSSOLFDEOH
Ɣ$OZD\VFDUU\WKHSURGXFWE\LWVKDQGOHV
Ɣ3URWHFWWKHSURGXFWIURPDQ\KHDY\LPSDFWRUVWURQJYLEUDWLRQVZKLFKPD\RFFXUGXULQJWUDQVSRUWD
WLRQLQYHKLFOHV
Ɣ6HFXUHWKHSURGXFWWRSUHYHQWLWIURPVOLSSLQJRUIDOOLQJRYHU
Transportation
3URGXFW GRHV
QRW VWDUW
BDWWHU\ SDFN QRW
SURSHUO\ DWWDFKHG
2 BDWWHU\ SDFN
GLVFKDUJHG
BDWWHU\ SDFN
GDPDJHG
OWKHU HOHFWULFDO GHIHFW
WR WKH SURGXFW
$WWDFK SURSHUO\
2 5HPRYH DQG FKDUJH EDWWHU\ SDFN
&KHFN E\ D VSHFLDOLVW HOHFWULFLDQ
&KHFN E\ D VSHFLDOLVW HOHFWULFLDQ
2 3URGXFW GRHV
QRW UHDFK
IXOO SRZHU
2 BDWWHU\ SDFN FDSDFLW\
WRR ORZ
22 $LU YHQWV DUH EORFNHG
&KDUJH EDWWHU\ SDFN
&OHDQ WKH DLU YHQWV
8QVDWLVIDFWRU\
UHVXOW
&XWWLQJ GHYLFH ZRUQ
5HSODFHZLWKDQHZRQH
21
WARRANTY
:HWDNHSULGHLQSURGXFLQJDKLJKTXDOLW\GXUDEOHSURGXFW7KLV/DZQPDVWHUSURGXFWFDUULHVD
OLPLWHGWZR\HDUVZDUUDQW\DJDLQVWGHIHFWVLQZRUNPDQVKLSDQGPDWHULDOVIURPGDWHRISXUFKDVH
XQGHUQRUPDOKRXVHKROGXVH,ISURGXFWLVWREHXVHGIRUFRPPHUFLDOLQGXVWULDORUUHQWDOXVHD
GD\OLPLWHGZDUUDQW\ZLOODSSO\%DWWHULHVFDUU\DRQH\HDUZDUUDQW\DJDLQVWGHIHFWVLQZRUNPDQVKLS
DQGPDWHULDOV%DWWHULHVPXVWEHFKDUJHGLQDFFRUGDQFHZLWKWKHRSHUDWRU
VPDQXDOVGLUHFWLRQVDQG
UHJXODWLRQVLQRUGHUWREHYDOLG:DUUDQW\GRHVQRWDSSO\WRGHIHFWVGXHWRGLUHFWRULQGLUHFWDEXVH
QHJOLJHQFHPLVXVHDFFLGHQWVUHSDLUVRUDOWHUDWLRQVDQGODFNRIPDLQWHQDQFH3OHDVHNHHS\RXU
UHFHLSWSDFNLQJOLVWDVSURRIRISXUFKDVH7KLVZDUUDQW\JLYHV\RXVSHFLILFOHJDOULJKWVDQG\RX
PD\KDYHRWKHUULJKWVZKLFKYDU\IURPVWDWHWRVWDWH)RUSURGXFWVHUYLFHFDOO&XVWRPHU6HUYLFHDW
,WHPVQRWFRYHUHGE\ZDUUDQW\
$Q\SDUWWKDWKDVEHFRPHLQRSHUDWLYHGXHWRPLVXVHFRPPHUFLDOXVHDEXVHQHJOHFWDFFLGHQW
LPSURSHUPDLQWHQDQFHRUDOWHUDWLRQ
7KHXQLWLILWKDVQRWEHHQRSHUDWHGDQGRUPDLQWDLQHGLQDFFRUGDQFHZLWKWKHRZQHU
VPDQXDO
1RUPDOZHDUH[FHSWDVQRWHGEHORZ
5RXWLQHPDLQWHQDQFHLWHPVVXFKDVOXEULFDQWVEODGHVKDUSHQLQJ
1RUPDOGHWHULRUDWLRQRIWKHH[WHULRUILQLVKGXHWRXVHRUH[SRVXUH
7UDQVSRUWDWLRQ&KDUJHV7UDQVSRUWDWLRQFKDUJHVIRUWKHPRYHPHQWRIDQ\SRZHUHTXLSPHQWXQLWRU
DWWDFKPHQWDUHWKHUHVSRQVLELOLW\RIWKHSXUFKDVHU,WLVWKHSXUFKDVHU¶VUHVSRQVLELOLW\WRSD\
WUDQVSRUWDWLRQFKDUJHVIRUDQ\SDUWVXEPLWWHGIRUUHSODFHPHQWXQGHUWKLVZDUUDQW\XQOHVVVXFK
UHWXUQLVUHTXHVWHGLQZULWLQJE\/DZQ0DVWHU
Assistant Handle Assy
Left Housing
Left Decorating Cover
Left Pivot Housing
Rotate Housing
Inner Cable
Motor Assy
Steel Flower Guard
Blade
Safety Guard
Right Decorating Cover
Right Housing
Right Pivot Housing
Locking Knob
Right Handle
Rotate Control Assy
Connection Assy
Switch Button Assy
Battery
Inner Cable
Aluminium(Alu.) Tube
Pcb Board
Tube
Aluminum Tube Top
Button Assy
Switch
Inner Cable