BFBS TechniSat Quick Start Manual
Text of the manual
BFBS TechniSat Quick Start Guide
Page 1 of 4
23-8-12
Unpacking
Check that your set top box (STB) has all the following items:
Set top box
Remote control (2 AAA batteries supplied separately)
Mains power unit with two alternative plug adapters
HDMI signal cable
In addition, you will be supplied with a ‘Conditional Access Module’
(CAM) and a BFBS Viewing C
Page 2 of 4
23-8-12
Connections
The mains power is supplied with
an adapter for UK style “13 amp”
sockets and one for European
type 2 pin plugs. Fit the required
one by engaging the end away
from the power outlet cable then
pivot it down until it locks in place.
Rooms equipped for using an STB
will have a cable feed with an “F
type” screw connector.
Page 3 of 4
23-8-12
If your television has an HDMI connection available, this is the one to
choose. SCART and RCA phono connections provide alternatives
but you must then use the STB remote control MENU button as
described in the User Guide to make settings changes.
CAM and viewing card
Towards the right end of the
set top box is a flap covering
the slot for
Page 4 of 4
23-8-12
Card enabling
BFBS television broadcasts are encrypted to prevent programmes
being watched by non-entitled viewers. When a Viewing Card/CAM
is issued, the card is enabled but it can take up to two hours for the
card to begin working.
Until that happens you cannot
watch TV programmes and
the screen will show this “not
authorised” messa
