Lexmark printer Operation & User’s Manual

registered in the United States and/or other countries. © 2004 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550 Technical Reference

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications related to this product by calling 1-800-553-9727. In the United Kingdom and Eire, call +44 (0)8704 440 044. In other countries, contact your point of purchase. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility. Lexmark, Lexmark with diamond design, MarkNet, MarkVision, and Optra are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. ColorGrade, PerfectFinish, and PictureGrade are trademarks of Lexmark International, Inc. The following terms are trademarks or registered trademarks of other companies: AppleTalk, EtherTalk, LocalTalk, and Macintosh are trademarks of Apple Computer, Inc., registered in the United States and other countries. PCL® is a registered trademark of the Hewlett-Packard Company. PCL 3, PCL 5, and PCL 6 are Hewlett-Packard Company’s designations of a set of printer commands (language) and functions included in its printer products. These printers are intended to be compatible with the PCL 3, PCL 5, and PCL 6 languages. This means these printers recognize PCL 3, PCL 5, and PCL 6 commands used in various application programs, and that the printer emulates the functions corresponding to the commands. PostScript® is a registered trademark of Adobe Systems Incorporated. PostScript is Adobe Systems’ designation of a set of printer commands (language) and functions included in its software products. These printers are intended to be compatible with the PostScript language. This means these printers recognize PostScript commands used in various application programs, and that the printer emulates the functions corresponding to the commands. Other trademarks are the property of their respective owners. Safety Information • If your product is not marked with this symbol , it must be connected to an electrical outlet that is properly grounded. CAUTION: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the power cord or telephone, during a lightning storm. • The power cord must be connected to an electrical outlet that is near the product and easily accessible. • Refer to the Setup Guide for additional safety information, and for setting up the equipment. • Refer service or repairs, other than those described in the operating instructions, to a professional service person. Albertus The Monotype Corporation plc Antique Olive Monsieur Marcel OLIVE Apple-Chancery Apple Computer, Inc. Arial The Monotype Corporation plc Candid Agfa Corporation CG Omega Product of Agfa Corporation CG Times Based on Times New Roman under license from The Monotype Corporation plc, is a product of Agfa Corporation Chicago Apple Computer, Inc. Clarendon Linotype-Hell AG and/or its subsidiaries Eurostile Nebiolo Geneva Apple Computer, Inc. GillSans The Monotype Corporation plc Helvetica Linotype-Hell AG and/or its subsidiaries Hoefler Jonathan Hoefler Type Foundry ITC Avant Garde Gothic International Typeface Corporation ITC Bookman International Typeface Corporation ITC Lubalin Graph International Typeface Corporation ITC Mona Lisa International Typeface Corporation ITC Zapf Chancery International Typeface Corporation Joanna MT The Monotype Corporation plc Marigold Arthur Baker Monaco Apple Computer, Inc. New York Apple Computer, Inc. Oxford Arthur Baker Palatino Linotype-Hell AG and/or its subsidiaries Stempel Garamond Linotype-Hell AG and/or its subsidiaries Taffy Agfa Corporation Times New Roman The Monotype Corporation plc TrueType Apple Computer, Inc. Univers Linotype-Hell AG and/or its subsidiaries Wingdings Microsoft Corporation © 1998, 2004 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.

Bibliography........................................................................................................1-5 PCL Emulation..................................................................2-1 Selecting PCL Emulation....................................................................................2-1 Using SmartSwitch........................................................................................2-1 Using the Operator Panel or MarkVision Professional..................................2-1 Using Your Software Program ......................................................................2-2 Page Formatting.................................................................................................2-3 Printable Areas..............................................................................................2-3 Lexmark C510(n) ..........................................................................................2-4 Lexmark X422...............................................................................................2-5 Lexmark E230, E232, E234(n), E330, E332n...............................................2-6 Print Area Menu Item..........................................................................................2-7 Font and Symbol Set Support for the Lexmark X422.........................................2-9 Forward and Backward Compatibility Modes for the Lexmark X422 ..........2-10 Selecting Symbol Sets for the Lexmark X422.............................................2-15 Font and Symbol Set Support for the Lexmark C510(n) ..................................2-19 Forward and Backward Compatibility Modes for the Lexmark C510(n)......2-20 Selecting Symbol Sets for the Lexmark C510(n) ........................................2-25 Font and Symbol Set Support for the Lexmark E230, E232.............................2-29 Forward and Backward Compatibility Modes for the Lexmark E230, E232 2-30 Selecting Symbol Sets for Lexmark E230, E232 ........................................2-32 Font and Symbol Set Support for the Lexmark E234(n), E330, E332n............2-37 Forward and Backward Compatibility Modes for the Lexmark E234(n), E330, and E332n..........................................................................................................2-38 Selecting Symbol Sets for the Lexmark E234(n), E330, and E332n...........2-43 Command Structure .........................................................................................2-59 Control Codes .............................................................................................2-59 Commands..................................................................................................2-59

PCL Emulation Commands by Function .....................................................2-62 GL/2 Commands ..............................................................................................2-84 Raster Image Graphics.....................................................................................2-88 Raster Compression Mode .........................................................................2-88 Macros..............................................................................................................2-95 Printer Job Language ......................................................3-1 PJL Command Notation .....................................................................................3-1 Kernel Commands..............................................................................................3-2 Job Separation Commands................................................................................3-4 Environment Commands and Variables.............................................................3-7 Status Readback Commands...........................................................................3-54 Status Message Format ...................................................................................3-61 Information Messages.................................................................................3-61 Auto-Continuable Conditions ......................................................................3-63 Attendance Conditions................................................................................3-67 Operator Intervention - Paper Handling ......................................................3-72 Operator Intervention - Paper Jams............................................................3-75 Service Errors .............................................................................................3-80 Device Attendance Commands........................................................................3-80 Unique PJL Commands....................................................................................3-82 File Commands for Flash or Disk................................................................3-86 File and Device Protection Commands ............................................................3-93 Protecting a File or Device..........................................................................3-93 Unlocking a Protected File or Device..........................................................3-95 Re-Locking a Protected File or Device........................................................3-96 Unlocking a Protected File or Device for the Current Job...........................3-97 Recovering Lost Passwords........................................................................3-98 PostScript Emulation.......................................................4-1 Selecting PostScript Emulation ..........................................................................4-1 Using SmartSwitch........................................................................................4-1 Using the Operator Panel or MarkVision Professional..................................4-1 Using Your Software Program ......................................................................4-2 Page Formatting.................................................................................................4-3

PostScript Emulation Fonts for the Lexmark X422.............................................4-7 PostScript Emulation Fonts for the Lexmark C510(n) ........................................4-9 PostScript Emulation Fonts for the Lexmark E234(n), E330, E332n................4-12 Supplemental Operators...................................................................................4-14 Command Format .......................................................................................4-14 Paper Size Support.....................................................................................4-15 Paper Tray Support.....................................................................................4-18 Envelope Size Support................................................................................4-23 Envelope Tray Support ...............................................................................4-25 Supplemental Operator Summary...............................................................4-27 Page Device Parameters..................................................................................4-62 Interpreter Parameters .....................................................................................4-76 User Parameters.........................................................................................4-76 System Parameters.....................................................................................4-79 Device Parameters......................................................................................4-85 Status and Error Messages............................................................................4-106 Tagged Binary Not Active .........................................................................4-106 Tagged Binary Active................................................................................4-106 Status Messages.......................................................................................4-107 Unsolicited Messages ...............................................................................4-108 Switching Languages ......................................................5-1 SmartSwitch .......................................................................................................5-1 Setting SmartSwitch for Different Interfaces .................................................5-2 Printer Job Language .........................................................................................5-2 Sniffing................................................................................................................5-3 Flash Memory and Disk ...................................................6-1 Resource Data Collection (Download Target)....................................................6-2 Storing Resources on Flash Memory or Disk................................................6-3 Viewing the Contents of Flash Memory and Disk...............................................6-3 Password Protection...........................................................................................6-7 Rewriting the Flash Content ...............................................................................6-8 Accessing Files with PostScript Emulation.........................................................6-9

Device Search Order...................................................................................6-12 Performance.....................................................................................................6-13 Job Buffering ....................................................................................................6-13 Creating a Partition .....................................................................................6-14 Enabling Job Buffering................................................................................6-14 Disabling Job Buffering ...............................................................................6-15 Recovering from a Power Loss...................................................................6-15 Printer Specifications ......................................................7-1 Airflow Requirement......................................................................................7-1 Noise Emission Levels..................................................................................7-1 Electrical Specifications ................................................................................7-2 Power Requirements.....................................................................................7-2 Physical Specifications..................................................................................7-4 ......................................................................................................................7-4 Clearance Requirements .............................................................................7-4 Environmental Conditions .............................................................................7-5 Altitude Specifications...................................................................................7-5 Atmospheric Pressure...................................................................................7-5 Power On to Ready State Time Period ........................................................7-6 Time to Print the First Page .........................................................................7-6 Printer Interfaces..............................................................8-1 Setting Up the Communications Port .................................................................8-2 Setting Up the Communications Port Using Windows 95/98/Me ..................8-2 Setting Up the Communications Port Using Windows NT 4.0 ......................8-3 Setting Up the Communications Port Using Windows 2000 .........................8-4 Setting Up the Communications Port Using Windows XP ............................8-5 Deciding Which Interface to Use ........................................................................8-6 Parallel Interface.................................................................................................8-7 Standard Parallel Connector.........................................................................8-8 Optional Parallel Connector ..........................................................................8-8 Parallel Connector Pin Assignments.............................................................8-8 Using the INIT* Signal to Initialize...............................................................8-11 Computer-to-Printer Communications.........................................................8-11

Parallel Mode 1 ...........................................................................................8-18 Parallel Mode 2 ...........................................................................................8-19 Signal Descriptions .....................................................................................8-19 Serial Interface .................................................................................................8-25 Using the RS-232C Serial Interface............................................................8-26 Using the RS-422 Serial Interface...............................................................8-36 Network Support...............................................................................................8-42 Input Buffer.......................................................................................................8-43 PCL Support .................................................................... A-1 PJL Support..................................................................... B-1 PostScript Support ......................................................... C-1 Index................................................................................. X-1

Overview The following edition of the Technical Reference contains information about printer commands and printer languages supported by the following Lexmark printers: • Lexmark™ C510(n) • Lexmark X422 • Lexmark E230, E232, E330, E332n, E234(n) To determine which commands and languages your printer supports, see the appendixes in the back of this document or refer to your printer user documentation. If your printer is not included in this edition of the Technical Reference, it may be available in another version. Visit the Lexmark Web site at www.lexmark.com/ publications for more information.

part number from the following table, call 1-800-553-9727, and select option #1 to order a Technical Reference for your printer. The Technical Reference is divided into the following: Chapter 2: “PCL Emulation” Shows how to select PCL emulation and discusses PCL emulation commands, GL/2 commands, and resident font and symbol set support. Chapter 3: “Printer Job Language” Contains detailed information about certain commands that cause the printer to enter PCL emulation, PostScript emulation, and Personal Printer Data Stream (PPDS), and many other types of commands. Chapter 4: “PostScript Emulation” Provides information about PostScript emulation and explains PostScript emulation supplemental operators. Chapter 5: “Switching Languages” Describes ways to switch printer languages and explains when you may want to choose one method over another. Chapter 6: “Flash Memory and Disk” Provides information about using the flash memory and hard disk. It describes how to manage printer memory, store resources (such as fonts and macros), and manage files. Table 1-1: Technical Reference Documentation Available in Hard Copy If you need a Technical Reference for the... Order Lexmark part number... Optra™ K 11A4079 Optra N 11A9979 Optra SC 11C0905 Optra E310 12A2194

Lists printer specifications, including information about hardware and environmental conditions. Chapter 8: “Printer Interfaces” Provides information on printer interfaces, including information about parallel and serial interface, network support, and communication protocols. See the tables in the three appendixes to determine if your printer supports a particular PCL emulation, PJL, or PostScript emulation command. The appendixes are: Appendix A: “PCL Support” Appendix B: “PJL Support” Appendix C: “PostScript Support”

information you need. • To move forward and backward through this document: – Select an option under View in the menu bar at the top of the page. – Use the arrows in the toolbar at the top of the page, or the up arrow and down arrow keys on the keyboard. – Press the Page Up and Page Down keys on the keyboard. – Use the scroll bar to the right of the page. – Click the page number box on the status bar at the bottom of the page and type the page you want. • To increase or decrease the magnification of the pages: – Select the magnifying glass icon on the toolbar at the top of the page and then draw a box around the area you want to view. – Click the magnification box on the status bar and select an option from the drop-down menu. • To jump directly to a particular section or key word in this document: – Click one of the bookmarks in the overview window to the left of the page. – Click a topic in the document’s table of contents. – Select Tools from the menu bar and then choose Find or Search. – Click the binoculars icon on the toolbar and then type a word in the text box. – Click a cross-reference to a figure, page number, or heading in the docu- ment itself. Printing the File Although this book was designed primarily for online viewing, you can print a hard copy by clicking File on the toolbar, and then choosing Print. Make sure you’ve selected the correct printer, range of pages, and number of copies before you click OK. You should be aware that if you print this document on a color printer, the color you see on the paper may not match the color you see on your computer monitor.

emulation printer commands and operators, and interfaces, refer to the following documentation: • Hewlett-Packard DeskJet Printer Family Technical Reference, C2121-90101 • Hewlett-Packard LaserJet 4 Typography and Graphics, Random House Electronic Publishing • Hewlett-Packard PCL 5 Color Technical Reference Manual, 5961-0635 • Hewlett-Packard PCL 5 Printer Language Technical Reference Manual, 5961-0509 • Hewlett-Packard PostScript SIMM Technical Reference, I/O Device Operators and Parameters, C2080-90921 • Hewlett-Packard Printer Job Language Technical Reference Manual, 5961H0512 • IBM Personal System/2 Hardware Interface Technical Reference, S68X-2330 • Interface between Data Terminal Equipment and Data Communications Equipment Employing Serial Binary Data Interchange, Electronic Industries Association, publications EIA RS-232C and EIA\TIA-232-E • Network Printing Alliance Protocol, A Printer/Host Control Specification Developed by the NPA, Level 1, Revision N • PostScript Language Reference Manual (Third Edition), Adobe Systems Incorporated, Addison-Wesley Publishing

When you select PCL emulation as the printer language, the printer supports the Hewlett-Packard Company’s LaserJet Printer Command Language. This chapter shows how to select PCL emulation and discusses PCL emulation commands, along with resident PCL emulation font and symbol set support. To determine which commands your printer supports, see Appendix A: “PCL Support” on page A-1. Selecting PCL Emulation Using SmartSwitch When SmartSwitch is enabled for both printer languages on an interface (for example, Parallel, USB, Serial Option 1, or Network Option 1), the printer automatically switches to the printer language being sent by your software program. The printer is shipped with SmartSwitch enabled for both printer languages in all interfaces. The printer examines all print jobs and switches dynamically between PostScript emulation and PCL emulation. Using the Operator Panel or MarkVision Professional If SmartSwitch is set to Off for both printer languages, you can select PCL emulation from your printer operator panel or from MarkVision™ Professional. Refer to your printer user documentation for information on changing menu settings.

To select PCL emulation, use the Printer Job Language (PJL) Enter Language Command. See “ENTER LANGUAGE Command” on page 3-3 for more information. See “Printer Job Language” on page 3-1 for the syntax and use of PJL. Warning: When you change printer languages, you may lose some or all previously downloaded resources, unless Resource Save is set to On or the resources are stored in flash memory or on disk.

orientation) are illustrated below. See the Legend that follows for definitions of areas A through I. Printable Areas Legend: A Portrait physical page width and landscape physical page length B Portrait physical page length and landscape physical page width C Portrait logical page width D Landscape logical page width E Distance between the side edge of the physical page and the logical page in portrait F Distance between the side edge of the physical page and the logical page in landscape G Distance between the top and bottom edge of the physical page and logical page H Distance between the left and right edge of the physical page and the printable area in portrait, or distance between the top and bottom edge of the physical page and printable area in landscape I Distance between the top and bottom edge of the physical page and the printable area in portrait, or distance between the left and right edge of the physical page and the printable area in landscape Note: The tables beginning on page 2-4 list the page sizes and dimensions of each area labeled on the preceding diagram for all paper and envelope sizes your printer supports. If information about your printer is not included in the following tables, see page 1-1 for information on how to get a Technical Reference for your printer.

envelope sizes the Lexmark C510(n) printer supports. For more information about the printable areas and logical pages for PCL emulation, see “Printable Areas” on page 2-3. Note: The explanation of the printable area assumes the Print Area menu item is set to Normal. For more information about Print Area, see page 2-6. Table 2-1: Lexmark C510(n) Paper and Envelope Dimensions Selection Paper/Envelope Dimensions Dimensions by Area (pels)1 Page Size Parm2 Name mm inches A B C D E F G H I Paper 13, 613 A5 148 x 210 5.83 x 8.27 3496 4960 3196 4720 142 118 0 100 100 12, 45, 612 JIS B5 Paper 182 x 257 7.2 x 10.1 4300 6070 4000 5830 150 120 0 100 100 26, 626 A4 (198 mm)3 210 x 297 8.3 x 11.7 4960 7014 4676 6778 142 118 0 80 80 26, 626 A4 (203 mm)3 210 x 297 8.3 x 11.7 4960 7014 4800 6778 80 118 0 80 80 1, 601 Executive 184 x 267 7.25 x 10.5 4350 6300 4050 6060 150 120 0 100 100 2, 602 Letter 216 x 279 8.5 x 11 5100 6600 4800 6360 150 120 0 100 100 3, 603 Legal5 216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 100 4 or 10 Folio5 216 x 330 8.5 x 13 5100 7800 4800 7560 150 120 0 100 100 15 Statement 139.7 x 215.9 5.5 x 8.5 3300 5100 3000 4860 150 120 0 100 100 101 Universal5 216 x 356 8.5 x 14 5100 8500 4800 8260 150 120 0 100 100 Envelope 90 DL 220 x 110 8.66 x 4.33 2598 5196 2314 4960 142 118 0 100 100 91 C5 229 x 162 9.02 x 6.38 3826 5408 3542 5172 142 118 0 100 100 994, 100 B5 Envelope 250 x 176 9.84 x 6.93 4156 5904 3872 5668 142 118 0 100 100 600 Other Envelope5 216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 412 89 9 (Com 9) 225 x 98 8.875 x 3.875 2326 5324 2024 5084 150 120 0 100 100 81 10 (Com 10) 241 x 105 9.5 x 4.125 2474 5700 2174 5460 150 120 0 100 100 1 Pel dimensions are for 600 dpi. 2 Page Size Parameters are explained in Table 2-30 on page 2-64. 3 The width of the logical page for A4 paper can be changed from the printer operator panel or your software application. 4 Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039. 5 The Lexmark C510(n) supports this size media only with an optional legal tray.

envelope sizes the Lexmark X422 printer supports. For more information about the printable areas and logical pages for PCL emulation, see “Printable Areas” on page 2-3. Note: The explanation of the printable area assumes the Print Area menu item is set to Normal. For more information about Print Area, see page 2-6. Table 2-2: Lexmark X422 Paper and Envelope Dimensions Selection Paper/Envelope Dimensions Dimensions by Area (pels)1 Page Size Parm2 Name mm inches A B C D E F G H I Paper 13, 613 A5 148 x 210 5.83 x 8.27 3496 4960 3196 4720 142 118 0 100 100 12, 45, 612 JIS B5 Paper 182 x 257 7.2 x 10.1 4300 6070 4000 5830 150 120 0 100 100 26, 626 A4 (198 mm)3 210 x 297 8.3 x 11.7 4960 7014 4676 6778 142 118 0 80 80 26, 626 A4 (203 mm)3 210 x 297 8.3 x 11.7 4960 7014 4800 6778 80 118 0 80 80 1, 601 Executive 184 x 267 7.25 x 10.5 4350 6300 4050 6060 150 120 0 100 100 2, 602 Letter 216 x 279 8.5 x 11 5100 6600 4800 6360 150 120 0 100 100 3, 603 Legal 216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 100 4 or 10 Folio 216 x 330 8.5 x 13 5100 7800 4800 7560 150 120 0 100 100 15 Statement 139.7 x 215.9 5.5 x 8.5 3300 5100 3000 4860 150 120 0 100 100 101 Universal 216 x 356 8.5 x 14 5100 8500 4800 8260 150 120 0 100 100 Envelope 90 DL 220 x 110 8.66 x 4.33 2598 5196 2314 4960 142 118 0 100 100 91 C5 229 x 162 9.02 x 6.38 3826 5408 3542 5172 142 118 0 100 100 994, 100 B5 Envelope 250 x 176 9.84 x 6.93 4156 5904 3872 5668 142 118 0 100 100 600 Other Envelope 229 x 356 9.02 x 14 5100 8400 4800 8160 150 120 0 100 100 80 7-3/4 Monarch 191 x 98 7.5 x 3.875 2326 4500 2024 4260 150 120 0 100 100 89 9 (Com 9) 225 x 98 8.875 x 3.875 2326 5324 2024 5084 150 120 0 100 100 81 10 (Com 10) 241 x 105 9.5 x 4.125 2474 5700 2174 5460 150 120 0 100 100 1 Pel dimensions are for 600 dpi. 2 Page Size Parameters are explained in Table 2-30 on page 2-64. 3 The width of the logical page for A4 paper can be changed from the printer operator panel or your software application. 4 Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039.

The following table lists page sizes and print area dimensions for all paper and envelope sizes the Lexmark E230, E232, E234(n), E330, and E332n printer supports. For more information about the printable areas and logical pages for PCL emulation, see “Printable Areas” on page 2-3. Note: The explanation of the printable area assumes the Print Area menu item is set to Normal. For more information about Print Area, see page 2-6. Table 2-3: Lexmark E230, E232, E234(n), E330, E332n Paper and Envelope Dimensions Selection Paper/Envelope Dimensions Dimensions by Area (pels)1 Page Size Parm2 Name mm inches A B C D E F G H I J K L Paper 13, 613 A5 148 x 210 5.83 x 8.27 3496 4960 3196 4720 142 118 0 100 100 100 100 300 12, 45, 612 JIS B5 Paper 182 x 257 7.2 x 10.1 4300 6070 4000 5830 150 120 0 100 100 100 100 300 26, 626 A4 (198 mm)3 210 x 297 8.3 x 11.7 4960 7014 4676 6778 142 118 0 80 80 100 100 300 26, 626 A4 (203 mm)3 210 x 297 8.3 x 11.7 4960 7014 4800 6778 80 118 0 80 80 100 100 300 1, 601 Executive 184 x 267 7.25 x 10.5 4350 6300 4050 6060 150 120 0 100 100 100 100 300 2, 602 Letter 216 x 279 8.5 x 11 5100 6600 4800 6360 150 120 0 100 100 100 100 300 3, 603 Legal 216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 100 100 100 300 4 or 10 Folio 216 x 330 8.5 x 13 5100 7800 4800 7560 150 120 0 100 100 100 100 300 15 Statement 139.7 x 215.9 5.5 x 8.5 3300 5100 3000 4860 150 120 0 100 100 100 100 300 101 Universal 216 x 356 8.5 x 14 5100 8500 4800 8260 150 120 0 100 100 100 100 300 Envelope 90 DL 220 x 110 8.66 x 4.33 2598 5196 2314 4960 142 118 0 100 100 100 100 300 91 C5 229 x 162 9.02 x 6.38 3826 5408 3542 5172 142 118 0 100 100 100 100 300 994, 100 B5 Envelope 250 x 176 9.84 x 6.93 4156 5904 3872 5668 142 118 0 100 100 100 100 300 600 Other Envelope 216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 412 100 100 300 89 9 (Com 9) 225 x 98 8.875 x 3.875 2326 5324 2024 5084 150 120 0 100 100 100 100 300 81 10 (Com 10) 241 x 105 9.5 x 4.125 2474 5700 2174 5460 150 120 0 100 100 100 100 300 1 Pel dimensions are for 600 dpi. 2 Page Size Parameters are explained in Table 2-30 on page 2-64. 3 The width of the logical page for A4 paper can be changed from the printer operator panel or your software application. 4 Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039. 1 1 1

The printable area is the area on a sheet of paper within which a pel can be printed. Logical page is a conceptual entity that defines the area in which margins (top, bottom, left, right) may be set and the area in which the PCL cursor may be positioned. The physical page border is the actual physical boundaries of a page. The Print Area menu item is available from the printer operator panel or through MarkVision Professional. For some printers, Print Area supports three values: Normal, Whole Page, and Fit to Page. Refer to your printer user documentation for more information. The Normal setting, which is the factory default, means the printable area includes the entire page except the narrow border around the edge of the page. This is the nonprintable area. The printer measures margin settings relative to the logical page. For a more detailed explanation of the Normal setting, see “Printable Areas” on page 2-3. PCL Logical Page Area Physical Page Border PCL Printable Area Legend: Only Portrait Orientation shown for all settings Normal setting Whole Page setting

Whole Page is selected, the PCL language sets the logical page area equal to the physical page dimensions. Since the logical page dimensions and the physical page dimensions are the same, in theory, the cursor may be positioned anywhere on the page. However, the PCL language clips the image to the printable area. So, the Whole Page setting is useful for printing scanned images that extend from edge to edge of a page. Some printers offer the Fit to Page setting. When Fit to Page is selected, PCL emulation or PostScript emulation formats a page using a printable area equal to the physical page, which is from one edge of the page to the other edge of the page. If you use this setting, no clipping occurs. In Fit to Page, the PCL emulation logical page dimensions are equal to the physical page dimensions, as in the Whole Page setting. The printer holds this formatted image in memory, but when the page prints, the image is compressed a small amount in both horizontal and vertical directions, and then centered on the physical page for letter-size paper only. This process creates a small margin around the image. This artificial margin prevents printing from one edge to the other, since doing so could contaminate the printer and cause printing problems. The following illustrations show an image held in memory for printing from one edge to the other and how the image would actually print based on the Fit to Page setting. Notice that a small border appears at the edges of the printed page, and the image is slightly compressed. Formatted Image with Fit to Page Printed Image with Fit to Page Physical Page Edge

Your printer has 91 resident fonts in PCL emulation, including 89 scalable fonts and two bitmapped fonts. Several parameters are used to select a font from the data stream. These include symbol set, spacing, point or pitch, style, weight, and typeface number. For scalable fonts, you can vary the size of a font by specifying pitch or point size. For bitmapped fonts, you must choose the pitch or point size listed on the font sample pages. You can print the font sample pages from the MFP control panel, using a PJL command (see “LPRINTPCLFONTS” on page 3-83.) or through MarkVision Professional. Refer to your printer user documentation for more information. A symbol set defines which characters are available for a font and the code point for each of these characters. Your printer supports 88 symbol sets. The tables beginning on page 2-15 show the symbol sets available for each font in PCL emulation. Not all fonts support all symbol sets. You can select a font as the PCL emulation default from the MFP control panel or through MarkVision Professional. Refer to your printer user documentation for more information. The fonts are divided into three major groups. The first 47 fonts (R0 through R46) shown on the font sample pages are the standard PCL emulation fonts. The next 39 fonts (R47 through R85) are called Type 1 fonts and were originally defined for PostScript emulation, but now also work in the PCL emulation. The last five fonts (R86 through R90) include three different Code 3 of 9 bar code fonts, OCR-A and OCR-B fonts. The fonts are further divided into font groups A, B, and C indicating which symbol sets are supported by each font. For a list of the 47 standard PCL emulation fonts, as well as the OCR and Code 3 of 9 bar code fonts, see Table 2-4 on page 2-10. For a list of the 39 Type 1 fonts, see Table 2-5 on page 2-13. Both tables list the forward and backward compatibility font selection commands and the font group (A, B, or C) for each font. For more information on forward and backward compatibility, see page 2-10. For more information on selecting symbol sets, see page 2-15. For compatibility purposes, you can disable Type 1 fonts with the Printer Job Language (PJL) LTYPE1FONTS command. The factory default for these fonts is Enabled. See LTYPE1FONTS on page 3-47 for more information.

number portion from the font identifier shown on the font sample pages, such as 0 or 76 from font identifiers R0 or R76. Use the PJL values shown in the tables beginning on page 2-15 to select a symbol set. If a symbol set does not have a PJL value, use the symbol set ID to select the symbol set. A font selection can be either temporary or set as the default. Use the following PJL commands to select fonts: FONTSOURCE, FONTNUMBER, PITCH, PTSIZE, SYMSET, SET, DEFAULT. See Table 3-5: “Common Variables for PCL Emulation” on page 3-48 for more information about these commands. Forward and Backward Compatibility Modes for the Lexmark X422 Your PCL emulation has forward and backward compatibility modes. The forward compatibility mode is used to emulate the fonts in the Hewlett-Packard Company’s LaserJet 4050. The backward compatibility mode is used for compatibility with the Hewlett-Packard Company’s LaserJet 5 and the Lexmark family of printers. Standard PCL Emulation Fonts, OCR and Code 3 of 9 bar code fonts Table 2-4 on page 2-10 lists the font selection commands for forward and backward compatibility mode for each of the 47 standard PCL emulation fonts, the OCR and Code 3 of 9 bar code fonts. Since the font selection commands for the forward and backward compatibility modes are identical, they are listed together in the table. Most fonts are assigned a font group indicating which symbol sets that font supports. To determine which symbol sets are supported by a particular font, find the font group (A, B, or C) for the font in Table 2-4, and then see Table 2-6 on page 2-15 for the symbol sets that belong to that group. Table 2-4: Forward and Backward Compatibility Font Selection Commands Standard PCL Emulation Font Name Forward and Backward Compatibility Mode Font Group Style Bold Typeface Courier 0 0 4099 A Courier Italic 1 0 4099 A Courier Bold 0 3 4099 A Courier Bold Italic 1 3 4099 A 1 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

1 0 4101 A CG Times Bold 0 3 4101 A CG Times Bold Italic 1 3 4101 A Univers Medium 0 0 4148 A Univers Medium Italic 1 0 4148 A Univers Bold 0 3 4148 A Univers Bold Italic 1 3 4148 A Letter Gothic 0 0 4102 B Letter Gothic Italic 1 0 4102 B Letter Gothic Bold 0 3 4102 B Univers Condensed Medium 4 0 4148 B Univers Condensed Medium Italic 5 0 4148 B Univers Condensed Bold 4 3 4148 B Univers Condensed Bold Italic 5 3 4148 B Garamond Antiqua 0 0 4197 B Garamond Kursiv 1 0 4197 B Garamond Halbfett 0 3 4197 B Garamond Kursiv Halbfett 1 3 4197 B CG Omega 0 0 4113 B CG Omega Italic 1 0 4113 B CG Omega Bold 0 3 4113 B CG Omega Bold Italic 1 3 4113 B Antique Olive 0 0 4168 B Antique Olive Italic 1 0 4168 B Antique Olive Bold 0 3 4168 B Albertus Medium 0 1 4362 B Albertus Extra Bold 0 4 4362 B Clarendon Condensed Bold 4 3 4140 B Marigold 0 0 4297 B Coronet 1 0 4116 B Table 2-4: Forward and Backward Compatibility Font Selection Standard PCL Emulation Font Name Forward and Backward Compatibility Mode Font Group Style Bold Typeface 1 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

0 0 16901 B Times New Roman Italic 1 0 16901 B Times New Roman Bold 0 3 16901 B Times New Roman BoldItalic 1 3 16901 B Arial 0 0 16602 B Arial Italic 1 0 16602 B Arial Bold 0 3 16602 B Arial Bold Italic 1 3 16602 B Symbol1 0 0 16686 Wingdings1 0 0 31402 Line Printer 161 0 0 0 A POSTNET Bar Code1 0 0 0 OCR-A1 0 0 23584 OCR-B1 0 0 23590 D C39 Narrow1 0 0 32774 C39 Regular1 0 0 32772 C39 Wide1 0 0 32777 Table 2-4: Forward and Backward Compatibility Font Selection Standard PCL Emulation Font Name Forward and Backward Compatibility Mode Font Group Style Bold Typeface 1 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

Thirty of the Type 1 fonts have different font selection parameters in the forward and backward compatibility modes and 9 of the fonts work only in the forward compatibility mode. With the appropriate printer driver installed and selected, your software application selects these fonts. The following table shows the font selection commands for forward and backward compatibility modes and indicates the font group for each font. All Type 1 fonts are supported by both the Hewlett-Packard Company’s LaserJet 4050 and the Lexmark family of printers unless otherwise noted. To determine which symbol sets are supported by a particular font, find the font group (A, B, or C) for the font in Table 2-5, and then see Table 2-6 on page 2-15 for the symbol sets that belong to that group. Table 2-5: Forward and Backward Compatibility Font Selection Commands Type 1 Font name Forward Compatibility Mode Backward Compatibility Mode Font Group Style Bold Typeface Style Bold Typeface ITC Avant Garde Book 0 0 24607 0 0 61471 B ITC Avant Garde Book Oblique 1 0 24607 1 0 61471 B ITC Avant Garde Demi 1 0 2 24607 0 3 61471 B ITC Avant Garde Demi Oblique 1 1 2 24607 1 3 61471 B ITC Bookman Light 0 -3 24623 0 -3 61487 B ITC Bookman Light Italic 1 -3 24623 1 -3 61487 B ITC Bookman Demi 0 2 24623 0 2 61487 B ITC Bookman Demi Italic 1 2 24623 1 2 61487 B Century Schoolbook Roman 0 0 24703 0 0 61463 B Century Schoolbook Italic 1 0 24703 1 0 61463 B Century Schoolbook Bold 0 3 24703 0 3 61463 B Century Schoolbook Bold Italic 1 3 24703 1 3 61463 B Helvetica 0 0 24580 0 0 61444 B Helvetica Italic 1 0 24580 1 0 61444 B Helvetica Bold 0 3 24580 0 3 61444 B Helvetica Bold Italic 1 3 24580 1 3 61444 B Helvetica Narrow 4 0 24580 4 0 61444 B 1 Notice the values for forward compatibility and backward compatibility modes differ slightly for Bold. 2 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050. 3 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

5 0 24580 5 0 61444 B Helvetica Narrow Bold 4 3 24580 4 3 61444 B Helvetica Narrow Bold Italic 5 3 24580 5 3 61444 B Helvetica Light 2 0 -3 24580 0 -3 61444 C Helvetica Light Oblique 2 1 -3 24580 1 -3 61444 C Helvetica Black 2 0 5 24580 0 5 61444 C Helvetica Black Oblique 2 1 5 24580 1 5 61444 C Palatino Roman 0 0 24591 0 0 61455 B Palatino Italic 1 0 24591 1 0 61455 B Palatino Bold 0 3 24591 0 3 61455 B Palatino Bold Italic 1 3 24591 1 3 61455 B ITC Zapf Chancery Medium Italic 1 0 45099 1 0 61483 B ITC Zapf Dingbats 3 0 0 45101 0 0 61485 CourierPS 0 0 24579 B CourierPS Oblique 1 0 24579 B CourierPS Bold 0 3 24579 B CourierPS Bold Oblique 1 3 24579 B Times Roman 0 0 25093 B Times Italic 1 0 25093 B Times Bold 0 3 25093 B Times Bold Italic 1 3 25093 B SymbolPS 3 0 0 45358 Table 2-5: Forward and Backward Compatibility Font Selection Commands (Continued) Type 1 Font name Forward Compatibility Mode Backward Compatibility Mode Font Group Style Bold Typeface Style Bold Typeface 1 Notice the values for forward compatibility and backward compatibility modes differ slightly for Bold. 2 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050. 3 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

Hewlett-Packard Company’s driver to select the forward compatibility fonts. The Lexmark PCL driver uses the backward compatibility mode and temporarily switches the printer to this mode. The PCL (PJL) commands to switch the default compatibility modes are: Forward ESC%-12345X@PJL DEFAULT LPARM:PCL LFONTCOMPATIBILITY=PCL6 @PJL RESET ESC%-12345X Backward ESC%-12345X@PJL DEFAULT LPARM:PCL LFONTCOMPATIBILITY=PCL5 @PJL RESET ESC%-12345X Selecting Symbol Sets for the Lexmark X422 To determine which symbol sets a font or typeface from Table 2-4 or Table 2-5 supports, see the complete listing of PCL emulation fonts and symbol sets in the following tables. Table 2-6: Symbol Set Support for PCL Emulation Text Fonts  Indicates the symbol set is supported by the fonts in the font group. Symbol Set ID PJL Value Font Group Symbol Set A B C D Roman Extension 0E     Roman-8 8U ROMAN8     PC-8 Code Page 437 10U PC8     PC-8 Danish/Norwegian (437N) 11U PC8DN    PC-850 Multilingual 12U PC850     PC-852 Latin 2 17U PC852    PC-8 Turkish (437T) 9T PC8TK   PC-775 Baltic (PC-8 Latin 6) 26U   PC-1004 OS/2 9J     Legal 1U LEGAL    DeskTop 7J DESKTOP   MC Text 12J    PS Text 10J PSTEXT   

9U WIN30     Windows Latin 1 19U WINL1     Windows Latin 2 9E WINL2    Windows Latin 5 5T WINL5   Windows Latin 6 (Baltic) 19L   ISO 8859-1 Latin 1 (ECMA-94) 0N ISOL1     ISO 8859-2 Latin 2 2N ISOL2    ISO 8859-9 Latin 5 5N ISOL5   ISO 8859-10 Latin 6 6N   ISO 8859-15 Latin 9 9N     PC-858 Multilingual Euro 13U     Roman-9 4U     Ventura International 13J VNINTL     Ventura US 14J VNUS     Ventura Math 6M VNMATH   PC-861 Iceland 21U    PC-863 Canadian French 23U     PC-865 Nordic 25U     PC-860 Portugal 20U     ABICOMP International 14P     ABICOMP Brazil/Portugal 13P     PC-8 PC Nova 27Q    PC-857 Latin 5 (Turkish) 16U   Turkish-8 8T   Table 2-6: Symbol Set Support for PCL Emulation Text Fonts (Continued)  Indicates the symbol set is supported by the fonts in the font group. Symbol Set ID PJL Value Font Group Symbol Set A B C D

18U  PC-8 Polish Mazovia 24Q   Windows Cyrillic 9R  ISO 8859-5 Latin/Cyrillic 10N  PC-866 Cyrillic 3R  PC-855 Cyrillic 10R  Russian-GOST 12R  PC-8 Bulgarian 13R  Ukrainian 14R  Windows Greek 9G  ISO 8859-7 Latin/Greek 12N  PC-869 Greece 11G  PC-851 Greece 10G  PC-8 Latin/Greek 12G  Greek-8 8G  PC-8 Greek Alternate (437G) 14G  Table 2-7: Non-Text PCL Emulation Symbol Sets Symbol Set Symbol Set ID Fonts PC-911 Katakana 3K Line Printer 16 Symbol 19M Symbol, SymbolPS Wingdings 579L Wingding POSTNET Bar Code 15Y POSTNET Bar Code Ventura ITC Zapf Dingbats 9L ITC Zapf Dingbats PS ITC Zapf Dingbats 10L ITC Zapf Dingbats PCL ITC Zapf Dingbats 14L ITC Zapf Dingbats C39 Bar Code (Uppercase) 9Y Code 3 of 9 C39 Bar Code (plus Lowercase) 109Y Code 3 of 9 Table 2-6: Symbol Set Support for PCL Emulation Text Fonts (Continued)  Indicates the symbol set is supported by the fonts in the font group. Symbol Set ID PJL Value Font Group Symbol Set A B C D

19 symbol sets. C39 Bar Code (plus Human Readable) 209Y Code 3 of 9 OCR-A 0O OCR-A OCR-B 1O OCR-B Table 2-8: ISO PCL Emulation Symbol Sets Symbol Set ID Symbol Set 1E ISO 4: United Kingdom 0U ISO 6: ASCII 0S ISO 11: Swedish for Names 0I ISO 15: Italian 2S ISO 17: Spanish 1G ISO 21: German 0D ISO 60: Norwegian Version 1 1F ISO 69: French 2U ISO 2: IRV (International Ref Version) 0F ISO 25: French 0G ISO: HP German 0K ISO 14: JIS ASCII 2K ISO 57: Chinese 3S ISO 10: Swedish 1S ISO: HP Spanish 6S ISO 85: Spanish 4S ISO 16: Portuguese 5S ISO 84: Portuguese 1D ISO 61: Norwegian Version 2 Table 2-7: Non-Text PCL Emulation Symbol Sets Symbol Set Symbol Set ID Fonts

C510(n) Your printer has 91 resident fonts in PCL emulation, including 89 scalable fonts and two bitmapped fonts. Several parameters are used to select a font from the data stream. These include symbol set, spacing, point or pitch, style, weight, and typeface number. For scalable fonts, you can vary the size of a font by specifying pitch or point size. For bitmapped fonts, you must choose the pitch or point size listed on the font sample pages. You can print the font sample pages from the printer operator panel, using a PJL command (see “LPRINTPCLFONTS” on page 3-83.) or through MarkVision Professional. Refer to your printer user documentation for more information. A symbol set defines which characters are available for a font and the code point for each of these characters. Your printer supports 88 symbol sets. The tables beginning on page 2-15 show the symbol sets available for each font in PCL emulation. Not all fonts support all symbol sets. You can select a font as the PCL emulation default from the printer operator panel or through MarkVision Professional. Refer to your printer user documentation for more information. The fonts are divided into three major groups. The first 47 fonts (R0 through R46) shown on the font sample pages are the standard PCL emulation fonts. The next 39 fonts (R47 through R85) are called Type 1 fonts and were originally defined for PostScript emulation, but now also work in the PCL emulation. The last five fonts (R86 through R90) include three different Code 3 of 9 bar code fonts, OCR-A and OCR-B fonts. The fonts are further divided into font groups A, B, and C indicating which symbol sets are supported by each font. For a list of the 47 standard PCL emulation fonts, as well as the OCR and Code 3 of 9 bar code fonts, see Table 2-4 on page 2-10. For a list of the 39 Type 1 fonts, see Table 2-5 on page 2-13. Both tables list the forward and backward compatibility font selection commands and the font group (A, B, or C) for each font. For more information on forward and backward compatibility, see page 2-10. For more information on selecting symbol sets, see page 2-15. For compatibility purposes, you can disable Type 1 fonts with the Printer Job Language (PJL) LTYPE1FONTS command. The factory default for these fonts is Enabled. See LTYPE1FONTS on page 3-47 for more information.

number portion from the font identifier shown on the font sample pages, such as 0 or 76 from font identifiers R0 or R76. Use the PJL values shown in the tables beginning on page 2-15 to select a symbol set. If a symbol set does not have a PJL value, use the symbol set ID to select the symbol set. A font selection can be either temporary or set as the default. Use the following PJL commands to select fonts: FONTSOURCE, FONTNUMBER, PITCH, PTSIZE, SYMSET, SET, DEFAULT. See Table 3-5: “Common Variables for PCL Emulation” on page 3-48 for more information about these commands. Forward and Backward Compatibility Modes for the Lexmark C510(n) Your PCL emulation has forward and backward compatibility modes. The forward compatibility mode is used to emulate the fonts in the Hewlett-Packard Company’s LaserJet 4050. The backward compatibility mode is used for compatibility with the Hewlett-Packard Company’s LaserJet 5 and the Lexmark family of printers. Standard PCL Emulation Fonts, OCR and Code 3 of 9 bar code fonts Table 2-4 on page 2-10 lists the font selection commands for forward and backward compatibility mode for each of the 47 standard PCL emulation fonts, the OCR and Code 3 of 9 bar code fonts. Since the font selection commands for the forward and backward compatibility modes are identical, they are listed together in the table. Most fonts are assigned a font group indicating which symbol sets that font supports. To determine which symbol sets are supported by a particular font, find the font group (A, B, or C) for the font in Table 2-4, and then see Table 2-6 on page 2-15 for the symbol sets that belong to that group. Table 2-9: Forward and Backward Compatibility Font Selection Commands Standard PCL Emulation Font Name Forward and Backward Compatibility Mode Font Group Style Bold Typeface Courier 0 0 4099 A Courier Italic 1 0 4099 A Courier Bold 0 3 4099 A 1 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

1 3 4099 A CG Times 0 0 4101 A CG Times Italic 1 0 4101 A CG Times Bold 0 3 4101 A CG Times Bold Italic 1 3 4101 A Univers Medium 0 0 4148 A Univers Medium Italic 1 0 4148 A Univers Bold 0 3 4148 A Univers Bold Italic 1 3 4148 A Letter Gothic 0 0 4102 B Letter Gothic Italic 1 0 4102 B Letter Gothic Bold 0 3 4102 B Univers Condensed Medium 4 0 4148 B Univers Condensed Medium Italic 5 0 4148 B Univers Condensed Bold 4 3 4148 B Univers Condensed Bold Italic 5 3 4148 B Garamond Antiqua 0 0 4197 B Garamond Kursiv 1 0 4197 B Garamond Halbfett 0 3 4197 B Garamond Kursiv Halbfett 1 3 4197 B CG Omega 0 0 4113 B CG Omega Italic 1 0 4113 B CG Omega Bold 0 3 4113 B CG Omega Bold Italic 1 3 4113 B Antique Olive 0 0 4168 B Antique Olive Italic 1 0 4168 B Antique Olive Bold 0 3 4168 B Albertus Medium 0 1 4362 B Albertus Extra Bold 0 4 4362 B Clarendon Condensed Bold 4 3 4140 B Marigold 0 0 4297 B Table 2-9: Forward and Backward Compatibility Font Selection Standard PCL Emulation Font Name Forward and Backward Compatibility Mode Font Group Style Bold Typeface 1 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

0 0 16901 B Times New Roman Italic 1 0 16901 B Times New Roman Bold 0 3 16901 B Times New Roman BoldItalic 1 3 16901 B Arial 0 0 16602 B Arial Italic 1 0 16602 B Arial Bold 0 3 16602 B Arial Bold Italic 1 3 16602 B Symbol1 0 0 16686 Wingdings1 0 0 31402 Line Printer 161 0 0 0 A POSTNET Bar Code1 0 0 0 OCR-A1 0 0 23584 OCR-B1 0 0 23590 D C39 Narrow1 0 0 32774 C39 Regular1 0 0 32772 C39 Wide1 0 0 32777 Table 2-9: Forward and Backward Compatibility Font Selection Standard PCL Emulation Font Name Forward and Backward Compatibility Mode Font Group Style Bold Typeface 1 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

Thirty of the Type 1 fonts have different font selection parameters in the forward and backward compatibility modes and 9 of the fonts work only in the forward compatibility mode. With the appropriate printer driver installed and selected, your software application selects these fonts. The following table shows the font selection commands for forward and backward compatibility modes and indicates the font group for each font. All Type 1 fonts are supported by both the Hewlett-Packard Company’s LaserJet 4050 and the Lexmark family of printers unless otherwise noted. To determine which symbol sets are supported by a particular font, find the font group (A, B, or C) for the font in Table 2-5, and then see Table 2-6 on page 2-15 for the symbol sets that belong to that group. Table 2-10: Forward and Backward Compatibility Font Selection Commands Type 1 Font name Forward Compatibility Mode Backward Compatibility Mode Font Group Style Bold Typeface Style Bold Typeface ITC Avant Garde Book 0 0 24607 0 0 61471 B ITC Avant Garde Book Oblique 1 0 24607 1 0 61471 B ITC Avant Garde Demi 1 0 2 24607 0 3 61471 B ITC Avant Garde Demi Oblique 1 1 2 24607 1 3 61471 B ITC Bookman Light 0 -3 24623 0 -3 61487 B ITC Bookman Light Italic 1 -3 24623 1 -3 61487 B ITC Bookman Demi 0 2 24623 0 2 61487 B ITC Bookman Demi Italic 1 2 24623 1 2 61487 B Century Schoolbook Roman 0 0 24703 0 0 61463 B Century Schoolbook Italic 1 0 24703 1 0 61463 B Century Schoolbook Bold 0 3 24703 0 3 61463 B Century Schoolbook Bold Italic 1 3 24703 1 3 61463 B Helvetica 0 0 24580 0 0 61444 B Helvetica Italic 1 0 24580 1 0 61444 B Helvetica Bold 0 3 24580 0 3 61444 B Helvetica Bold Italic 1 3 24580 1 3 61444 B Helvetica Narrow 4 0 24580 4 0 61444 B 1 Notice the values for forward compatibility and backward compatibility modes differ slightly for Bold. 2 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050. 3 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

5 0 24580 5 0 61444 B Helvetica Narrow Bold 4 3 24580 4 3 61444 B Helvetica Narrow Bold Italic 5 3 24580 5 3 61444 B Helvetica Light 2 0 -3 24580 0 -3 61444 C Helvetica Light Oblique 2 1 -3 24580 1 -3 61444 C Helvetica Black 2 0 5 24580 0 5 61444 C Helvetica Black Oblique 2 1 5 24580 1 5 61444 C Palatino Roman 0 0 24591 0 0 61455 B Palatino Italic 1 0 24591 1 0 61455 B Palatino Bold 0 3 24591 0 3 61455 B Palatino Bold Italic 1 3 24591 1 3 61455 B ITC Zapf Chancery Medium Italic 1 0 45099 1 0 61483 B ITC Zapf Dingbats 3 0 0 45101 0 0 61485 CourierPS 0 0 24579 B CourierPS Oblique 1 0 24579 B CourierPS Bold 0 3 24579 B CourierPS Bold Oblique 1 3 24579 B Times Roman 0 0 25093 B Times Italic 1 0 25093 B Times Bold 0 3 25093 B Times Bold Italic 1 3 25093 B SymbolPS 3 0 0 45358 Table 2-10: Forward and Backward Compatibility Font Selection Commands (Continued) Type 1 Font name Forward Compatibility Mode Backward Compatibility Mode Font Group Style Bold Typeface Style Bold Typeface 1 Notice the values for forward compatibility and backward compatibility modes differ slightly for Bold. 2 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050. 3 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

Hewlett-Packard Company’s driver to select the forward compatibility fonts. The Lexmark PCL driver uses the backward compatibility mode and temporarily switches the printer to this mode. The PCL (PJL) commands to switch the default compatibility modes are: Forward ESC%-12345X@PJL DEFAULT LPARM:PCL LFONTCOMPATIBILITY=PCL6 @PJL RESET ESC%-12345X Backward ESC%-12345X@PJL DEFAULT LPARM:PCL LFONTCOMPATIBILITY=PCL5 @PJL RESET ESC%-12345X Selecting Symbol Sets for the Lexmark C510(n) To determine which symbol sets a font or typeface from Table 2-4 or Table 2-5 supports, see the complete listing of PCL emulation fonts and symbol sets in the following tables. Table 2-11: Symbol Set Support for PCL Emulation Text Fonts  Indicates the symbol set is supported by the fonts in the font group. Symbol Set ID PJL Value Font Group Symbol Set A B C D Roman Extension 0E     Roman-8 8U ROMAN8     PC-8 Code Page 437 10U PC8     PC-8 Danish/Norwegian (437N) 11U PC8DN    PC-850 Multilingual 12U PC850     PC-852 Latin 2 17U PC852    PC-8 Turkish (437T) 9T PC8TK   PC-775 Baltic (PC-8 Latin 6) 26U   PC-1004 OS/2 9J     Legal 1U LEGAL    DeskTop 7J DESKTOP   MC Text 12J    PS Text 10J PSTEXT   

9U WIN30     Windows Latin 1 19U WINL1     Windows Latin 2 9E WINL2    Windows Latin 5 5T WINL5   Windows Latin 6 (Baltic) 19L   ISO 8859-1 Latin 1 (ECMA-94) 0N ISOL1     ISO 8859-2 Latin 2 2N ISOL2    ISO 8859-9 Latin 5 5N ISOL5   ISO 8859-10 Latin 6 6N   ISO 8859-15 Latin 9 9N     PC-858 Multilingual Euro 13U     Roman-9 4U     Ventura International 13J VNINTL     Ventura US 14J VNUS     Ventura Math 6M VNMATH   PC-861 Iceland 21U    PC-863 Canadian French 23U     PC-865 Nordic 25U     PC-860 Portugal 20U     ABICOMP International 14P     ABICOMP Brazil/Portugal 13P     PC-8 PC Nova 27Q    PC-857 Latin 5 (Turkish) 16U   Turkish-8 8T   Table 2-11: Symbol Set Support for PCL Emulation Text Fonts (Continued)  Indicates the symbol set is supported by the fonts in the font group. Symbol Set ID PJL Value Font Group Symbol Set A B C D

18U  PC-8 Polish Mazovia 24Q   Windows Cyrillic 9R  ISO 8859-5 Latin/Cyrillic 10N  PC-866 Cyrillic 3R  PC-855 Cyrillic 10R  Russian-GOST 12R  PC-8 Bulgarian 13R  Ukrainian 14R  Windows Greek 9G  ISO 8859-7 Latin/Greek 12N  PC-869 Greece 11G  PC-851 Greece 10G  PC-8 Latin/Greek 12G  Greek-8 8G  PC-8 Greek Alternate (437G) 14G  Table 2-12: Non-Text PCL Emulation Symbol Sets Symbol Set Symbol Set ID Fonts PC-911 Katakana 3K Line Printer 16 Symbol 19M Symbol, SymbolPS Wingdings 579L Wingding POSTNET Bar Code 15Y POSTNET Bar Code Ventura ITC Zapf Dingbats 9L ITC Zapf Dingbats PS ITC Zapf Dingbats 10L ITC Zapf Dingbats PCL ITC Zapf Dingbats 14L ITC Zapf Dingbats C39 Bar Code (Uppercase) 9Y Code 3 of 9 C39 Bar Code (plus Lowercase) 109Y Code 3 of 9 Table 2-11: Symbol Set Support for PCL Emulation Text Fonts (Continued)  Indicates the symbol set is supported by the fonts in the font group. Symbol Set ID PJL Value Font Group Symbol Set A B C D

19 symbol sets. C39 Bar Code (plus Human Readable) 209Y Code 3 of 9 OCR-A 0O OCR-A OCR-B 1O OCR-B Table 2-13: ISO PCL Emulation Symbol Sets Symbol Set ID Symbol Set 1E ISO 4: United Kingdom 0U ISO 6: ASCII 0S ISO 11: Swedish for Names 0I ISO 15: Italian 2S ISO 17: Spanish 1G ISO 21: German 0D ISO 60: Norwegian Version 1 1F ISO 69: French 2U ISO 2: IRV (International Ref Version) 0F ISO 25: French 0G ISO: HP German 0K ISO 14: JIS ASCII 2K ISO 57: Chinese 3S ISO 10: Swedish 1S ISO: HP Spanish 6S ISO 85: Spanish 4S ISO 16: Portuguese 5S ISO 84: Portuguese 1D ISO 61: Norwegian Version 2 Table 2-12: Non-Text PCL Emulation Symbol Sets Symbol Set Symbol Set ID Fonts

E232 Your printer supports 19 fonts in PCL emulation, including 17 scalable fonts and two bitmapped fonts. Several parameters are used to select a font from the data stream. These include symbol set, spacing, point or pitch, style, weight, and typeface number. Print the font sample pages to view the specific parameters for each font. For scalable fonts, you can vary the size of a font by specifying pitch or point size. For bitmapped fonts, you must choose the pitch or point size listed on the font sample pages. You can print the font sample pages using a PJL command (see “LPRINTPCLFONTS” on page 3-83). A symbol set defines which characters are available for a font and the code point for each of these characters. Your printer has 83 resident symbol sets. The tables beginning on page 2-32 show the symbol sets available for each font in PCL emulation. Not all fonts support all symbol sets. You can also select fonts using PJL commands. The selection parameter is the number portion from the font identifier shown on the font sample pages, such as 0 or 18 from font identifiers R0 or R18. Use the PJL values shown in the tables beginning on page 2-32 to select a symbol set. If a symbol set does not have a PJL value, use the symbol set ID to select the symbol set. A font selection can be either temporary or set as the default. Use the following PJL commands to select fonts: FONTSOURCE, FONTNUMBER, PITCH, PTSIZE, SYMSET, SET, DEFAULT. See “Table 3-5: Common Variables for PCL Emulation” on page 3-48 for more information about these commands.

Lexmark E230, E232 Your PCL emulation has forward and backward compatibility modes. The forward compatibility mode is used to emulate the fonts in the Hewlett-Packard Company’s LaserJet 4050. The backward compatibility mode is used for compatibility with the Hewlett-Packard Company’s LaserJet 5 and the Lexmark family of printers. Standard PCL Emulation Fonts The following table lists the font selection commands for forward and backward compatibility mode for each of the 14 standard PCL emulation fonts. Since the font selection commands for the forward and backward compatibility modes are identical, they are listed together in the table. Table 2-14: Forward and Backward Compatibility Font Selection Commands Standard PCL Emulation Font Name Forward and Backward Compatibility Mode Spacing Style Weight Typeface Courier 0 0 0 4099 Courier Italic 0 1 0 4099 Courier Bold 0 0 3 4099 Courier Bold Italic 0 1 3 4099 Times New Roman 1 0 0 16901 Times New Roman Italic 1 1 0 16901 Times New Roman Bold 1 0 3 16901 Times New Roman BoldItalic 1 1 3 16901 Arial 1 0 0 16602 Arial Italic 1 1 0 16602 Arial Bold 1 0 3 16602 Arial Bold Italic 1 1 3 16602 Line Printer 16 0 0 0 0 POSTNET Barcode 1 1 0 0 0 1 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.

The following table lists the font selection commands for forward and backward compatibility mode for each of the five specialty PCL fonts. Since the font selection commands for the forward and backward compatibility modes are identical, they are listed together in the table. Table 2-15: Forward and Backward Compatibility Font Selection Commands Standard PCL Emulation Font Name Forward and Backward Compatibility Mode Spacing Style Weight Typeface C39 Narrow 1 1 0 0 32774 C39 Regular 1 1 0 0 32772 C39 Wide 1 1 0 0 32777 OCR-A 1 0 0 0 23584 OCR-B 1 0 0 0 23590 1 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.

To determine if a font or typeface supports a symbol set, see the complete listing of PCL emulation fonts and symbol sets in the following tables: “Table 2-16: PCL Emulation Symbol Sets - Latin 1” on page 2-32, “Table 2-17: PCL Emulation Symbol Sets - Latin 2, Latin 5, Latin 6, Cyrillic, Greek” on page 2-34, and “Table 2-18: PCL Emulation Symbol Sets - Specials” on page 2-35. Table 2-16: PCL Emulation Symbol Sets - Latin 1 Latin 1 Typeface / Symbol Set Legal Windows 3.0 Latin 1 Windows 98 Latin 1 ISO 8859-1 Latin 1 (ECMA-94) ISO 8859-15 Latin 9 PC-8, Code Page 437 PC-8 Danish/Norwegian (437N) PC-850 Multilingual PC-858 Multilingual Euro PC-860 Portugal PC-861 Iceland PC-863 Canadian French PC-865 Nordic PC-1004 OS/2 ABICOMP Brazil/Portugal ABICOMP International Roman-8 Roman-9 Roman Extension PS Text MC Text Desk Top Ventura International Ventura US PJL Value LEGAL WIN30 WINL1 ISOL1 ISOL9 PC8 PC8DN PC850 PC858 ROMAN8 PSTEXT DESKTOP VNINTL VNUS Symbol Set ID 1U 9U 19U 0N 9N 10U 11U 12U 13U 20U 21U 23U 25U 9J 13P 14P 8U 4U 0E 10J 12J 7J 13J 14J Courier                         Courier Italic                         Courier Bold                         Courier Bold Italic                         Times New Roman                         Times New Roman Italic                         Times New Roman Bold                         Times New Roman Bold Italic                         Arial                         Arial Italic                         Arial Bold                         Arial Bold Italic                         Line Printer 16                          Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set.

✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Narrow ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Regular ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Wide ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ OCR-A ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ OCR-B                    ✘ ✘ ✘   Table 2-16: PCL Emulation Symbol Sets (Continued) - Latin 1 Latin 1 Typeface / Symbol Set Legal Windows 3.0 Latin 1 Windows 98 Latin 1 ISO 8859-1 Latin 1 (ECMA-94) ISO 8859-15 Latin 9 PC-8, Code Page 437 PC-8 Danish/Norwegian (437N) PC-850 Multilingual PC-858 Multilingual Euro PC-860 Portugal PC-861 Iceland PC-863 Canadian French PC-865 Nordic PC-1004 OS/2 ABICOMP Brazil/Portugal ABICOMP International Roman-8 Roman-9 Roman Extension PS Text MC Text Desk Top Ventura International Ventura US PJL Value LEGAL WIN30 WINL1 ISOL1 ISOL9 PC8 PC8DN PC850 PC858 ROMAN8 PSTEXT DESKTOP VNINTL VNUS Symbol Set ID 1U 9U 19U 0N 9N 10U 11U 12U 13U 20U 21U 23U 25U 9J 13P 14P 8U 4U 0E 10J 12J 7J 13J 14J  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set.

Typeface / Symbol Set Latin 2 Latin 5 Latin 6 Cyrillic Greek Windows 98 Latin 2 ISO 8859-2 Latin 2 PC-852 Latin 2 PC-8 Polish Mazovia PC-8 PC Nova Windows 98 Latin 5 ISO 8859-9 Latin 5 PC-857 Latin 5 (Turkish) PC-853 Latin 3 (Turkish) PC-Turkish (437T) Turkish-8 Windows 98 Latin 6 (Baltic) ISO 8859-10 Latin 6 PC-775 Baltic (PC-8 Latin 6) Windows 98 Cyrillic ISO 8859-5 Latin/Cyrillic PC-866 Cyrillic PC-855 Cyrillic Russian-GOST PC-8 Bulgarian Ukrainian Windows 98 Greek ISO 8859-7 Latin/Greek PC-869 Greece PC-851 Greece PC-8 Latin/Greek PC-8 Greek Alternate (437G) Greek-8 PJL Value WINL2 ISOL2 PC852 WINL5 ISOL5 PC8TK Symbol Set ID 9E 2N 17U 24Q 27Q 5T 5N 16U 18U 9T 8T 19L 6N 26U 9R 10N 3R 10R 12R 13R 14R 9G 12N 11G 10G 12G 14G 8G Courier                             Courier Italic                             Courier Bold                             Courier Bold Italic                             Times New Roman    ✘     ✘                    Times New Roman Italic    ✘     ✘                    Times New Roman Bold    ✘     ✘                    Times New Roman BoldItalic    ✘     ✘                    Arial    ✘     ✘                    Arial Italic    ✘     ✘                    Arial Bold    ✘     ✘                    Arial Bold Italic    ✘     ✘                    Line Printer 16                             POSTNET Barcode ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Narrow ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Regular ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Wide ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ OCR-A ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ OCR-B      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set.

Specials Typeface / Symbol Set Ventura Math PS Math Math-8 Pi font Microsoft Publishing PC-911 Katakana POSTNET Barcode OCR-A OCR-B C39 Bar Code (Upper Case) C39 Bar Code (plus Lower Case) C39 Bar Code (plus Human Readable) Symbol Wingdings Ventura ITC Zapf Dingbats PS ITC Zapf Dingbats PCL ITC Zapf Dingbats PJL Value VNMATH PSMATH MATH8 PIFONT MSPUBL Symbol Set ID 6M 5M 8M 15U 6J 3K 15Y 0O 1O 9Y 109Y 209Y 19M 579L 9L 10L 14L Courier      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Courier Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Courier Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Courier Bold Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times New Roman ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times New Roman Italic ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times New Roman Bold ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times New Roman BoldItalic ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Arial ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Arial Italic ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Arial Bold ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Arial Bold Italic ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Line Printer 16       ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ POSTNET Barcode ✘ ✘ ✘ ✘ ✘ ✘  ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Narrow ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘    ✘ ✘ ✘ ✘ ✘ C39 Regular ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘    ✘ ✘ ✘ ✘ ✘ C39 Wide ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘    ✘ ✘ ✘ ✘ ✘ OCR-A ✘ ✘ ✘ ✘ ✘ ✘ ✘  ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ OCR-B ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘  ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set.

19 symbol sets. Table 2-19: ISO PCL Emulation Symbol Sets Symbol Set ID Symbol Set / Typeface 1E ISO 4: United Kingdom 0U ISO 6: ASCII 0S ISO 11: Swedish for Names 0I ISO 15: Italian 2S ISO 17: Spanish 1G ISO 21: German 0D ISO 60: Norwegian Version 1 1F ISO 69: French 2U ISO 2: IRV (International Ref Version) 0F ISO 25: French 0G ISO: HP German 0K ISO 14: JIS ASCII 2K ISO 57: Chinese 3S ISO 10: Swedish 1S ISO: HP Spanish 6S ISO 85: Spanish 4S ISO 16: Portuguese 5S ISO 84: Portuguese 1D ISO 61: Norwegian Version 2

E234(n), E330, E332n Your printer has 91 resident fonts in PCL emulation, including 89 scalable fonts and two bitmapped fonts. Several parameters are used to select a font from the data stream. These include symbol set, spacing, point or pitch, style, weight, and typeface number. For scalable fonts, you can vary the size of a font by specifying pitch or point size. For bitmapped fonts, you must choose the pitch or point size listed on the font sample pages. You can print the font sample pages using a PJL command (see “LPRINTPCLFONTS” on page 3-83), or through MarkVision Professional (network models only). Refer to your printer user documentation for more information. A symbol set defines which characters are available for a font and the code point for each of these characters. Your printer supports 88 resident symbol sets. The tables beginning on page 2-43 show the symbol sets available for each font in PCL emulation. Not all fonts support all symbol sets. You can select a font as the PCL emulation default through MarkVision Professional (network models only). Refer to your printer user documentation for more information. The fonts are divided into three major groups. The first 47 fonts (R0 to R46) shown on the font sample pages are the standard PCL emulation fonts. The next 39 fonts (R47 to R85) are called Type 1 fonts and were originally defined for PostScript emulation, but now also work in the PCL emulation. The final five fonts (R86 to R90) are additional specialty PCL fonts. For a list of the 47 standard PCL emulation fonts, see Table 2-20 on page 2-38. For a list of the 39 Type 1 fonts, see Table 2-21 on page 2-40. For a list of the five additional specialty PCL fonts, see Table 2-22 on page 2-42. These tables list both the forward and backward compatibility font selection commands. For more information on forward and backward compatibility, see page 2-38. For more information on selecting symbol sets, see page 2-43. For compatibility purposes, you can disable Type 1 fonts with the Printer Job Language (PJL) LTYPE1FONTS command. The factory default for these fonts is Enabled. See LTYPE1FONTS on page 3-47 for more information. You can also select fonts using PJL commands. The selection parameter is the number portion from the font identifier shown on the font sample pages, such as 0 or 76 from font identifiers R0 or R76. Use the PJL values shown in the tables beginning

the symbol set ID to select the symbol set. A font selection can be either temporary or set as the default. Use the following PJL commands to select fonts: FONTSOURCE, FONTNUMBER, PITCH, PTSIZE, SYMSET, SET, DEFAULT. See “Table 3-5: Common Variables for PCL Emulation” on page 3-48 for more information about these commands. Forward and Backward Compatibility Modes for the Lexmark E234(n), E330, and E332n Your PCL emulation has forward and backward compatibility modes. The forward compatibility mode is used to emulate the fonts in the Hewlett-Packard Company’s LaserJet 4050. The backward compatibility mode is used for compatibility with the Hewlett-Packard Company’s LaserJet 5 and the Lexmark family of printers. Standard PCL Emulation Fonts The following table lists the font selection commands for forward and backward compatibility mode for each of the 47standard PCL emulation fonts. Since the font selection commands for the forward and backward compatibility modes are identical, they are listed together in the table. Table 2-20: Forward and Backward Compatibility Font Selection Commands Standard PCL Emulation Font Name Forward and Backward Compatibility Mode Spacing Style Weight Typeface Courier 0 0 0 4099 Courier Italic 0 1 0 4099 Courier Bold 0 0 3 4099 Courier Bold Italic 0 1 3 4099 CG Times 1 0 0 4101 CG Times Italic 1 1 0 4101 CG Times Bold 1 0 3 4101 CG Times Bold Italic 1 1 3 4101 Univers Medium 1 0 0 4148 Univers Medium Italic 1 1 0 4148 Univers Bold 1 0 3 4148 1 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.

1 1 3 4148 Times New Roman 1 0 0 16901 Times New Roman Italic 1 1 0 16901 Times New Roman Bold 1 0 3 16901 Times New Roman BoldItalic 1 1 3 16901 Arial 1 0 0 16602 Arial Italic 1 1 0 16602 Arial Bold 1 0 3 16602 Arial Bold Italic 1 1 3 16602 Letter Gothic 0 0 0 4102 Letter Gothic Italic 0 1 0 4102 Letter Gothic Bold 0 0 3 4102 Univers Condensed Medium 1 4 0 4148 Univers Condensed Medium Italic 1 5 0 4148 Univers Condensed Bold 1 4 3 4148 Univers Condensed Bold Italic 1 5 3 4148 Garamond Antiqua 1 0 0 4197 Garamond Kursiv 1 1 0 4197 Garamond Halbfett 1 0 3 4197 Garamond Kursiv Halbfett 1 1 3 4197 CG Omega 1 0 0 4113 CG Omega Italic 1 1 0 4113 CG Omega Bold 1 0 3 4113 CG Omega Bold Italic 1 1 3 4113 Antique Olive 1 0 0 4168 Antique Olive Italic 1 1 0 4168 Antique Olive Bold 1 0 3 4168 Albertus Medium 1 0 1 4362 Albertus Extra Bold 1 0 4 4362 Clarendon Condensed Bold 1 4 3 4140 Marigold 1 0 0 4297 Coronet 1 1 0 4116 Line Printer 16 0 0 0 0 Table 2-20: Forward and Backward Compatibility Font Selection Commands (Continued) Standard PCL Emulation Font Name Forward and Backward Compatibility Mode Spacing Style Weight Typeface 1 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.

Thirty of the Type 1 fonts have different font selection parameters in the forward and backward compatibility modes and 9 of the fonts work only in the forward compatibility mode. With the appropriate printer driver installed and selected, your software program selects these fonts. The following table shows the font selection commands for forward and backward compatibility modes and indicates the font group for each font. All Type 1 fonts are supported by both the Hewlett-Packard Company’s LaserJet 4050 and the Lexmark family of printers unless otherwise noted. POSTNET Barcode 1 1 0 0 0 Wingdings 1 0 0 31402 Symbol 1 0 0 16686 Table 2-21: Forward and Backward Compatibility Font Selection Commands Type 1 Font name Forward Compatibility Mode Backward Compatibility Mode Spacing Style Weight Typeface Spacing Style Weight Typeface Helvetica 1 0 0 24580 1 0 0 61444 Helvetica Italic 1 1 0 24580 1 1 0 61444 Helvetica Bold 1 0 3 24580 1 0 3 61444 Helvetica Bold Italic 1 1 3 24580 1 1 3 61444 Helvetica Narrow 1 4 0 24580 1 4 0 61444 Helvetica Narrow Italic 1 5 0 24580 1 5 0 61444 Helvetica Narrow Bold 1 4 3 24580 1 4 3 61444 Helvetica Narrow Bold Italic 1 5 3 24580 1 5 3 61444 Palatino Roman 1 0 0 24591 1 0 0 61455 Palatino Italic 1 1 0 24591 1 1 0 61455 Palatino Bold 1 0 3 24591 1 0 3 61455 Palatino Bold Italic 1 1 3 24591 1 1 3 61455 1 Notice the values for forward and backward compatibility modes differ slightly for Bold. 2 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050. 3 This font is not implemented in the Lexmark family of printers. Table 2-20: Forward and Backward Compatibility Font Selection Commands (Continued) Standard PCL Emulation Font Name Forward and Backward Compatibility Mode Spacing Style Weight Typeface 1 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.

1 0 -3 24623 1 0 -3 61487 ITC Bookman Light Italic 1 1 -3 24623 1 1 -3 61487 ITC Bookman Demi 1 0 2 24623 1 0 2 61487 ITC Bookman Demi Italic 1 1 2 24623 1 1 2 61487 ITC Avant Garde Book 1 0 0 24607 1 0 0 61471 ITC Avant Garde Book Oblique 1 1 0 24607 1 1 0 61471 ITC Avant Garde Demi 1 1 0 2 24607 1 0 3 61471 ITC Avant Garde Demi Oblique 1 1 1 2 24607 1 1 3 61471 Century Schoolbook Roman 1 0 0 24703 1 0 0 61463 Century Schoolbook Italic 1 1 0 24703 1 1 0 61463 Century Schoolbook Bold 1 0 3 24703 1 0 3 61463 Century Schoolbook Bold Italic 1 1 3 24703 1 1 3 61463 ITC Zapf Chancery Medium Italic 1 1 0 45099 1 1 0 61483 CourierPS 3 0 0 0 24579 CourierPS Oblique 3 0 1 0 24579 CourierPS Bold 3 0 0 3 24579 CourierPS Bold Oblique 3 0 1 3 24579 Times Roman 3 1 0 0 25093 Times Italic 3 1 1 0 25093 Times Bold 3 1 0 3 25093 Times Bold Italic 3 1 1 3 25093 Helvetica Light 2 1 0 -3 24580 1 0 -3 61444 Helvetica Light Oblique 2 1 1 -3 24580 1 1 -3 61444 Helvetica Black 2 1 0 5 24580 1 0 5 61444 Helvetica Black Oblique 2 1 1 5 24580 1 1 5 61444 SymbolPS 3 1 0 0 45358 ITC Zapf Dingbats 1 0 0 45101 1 0 0 61485 Table 2-21: Forward and Backward Compatibility Font Selection Commands (Continued) Type 1 Font name Forward Compatibility Mode Backward Compatibility Mode Spacing Style Weight Typeface Spacing Style Weight Typeface 1 Notice the values for forward and backward compatibility modes differ slightly for Bold. 2 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050. 3 This font is not implemented in the Lexmark family of printers.

Hewlett-Packard Company’s driver to select the forward compatibility fonts. The Lexmark PCL driver uses the backward compatibility mode and temporarily switches the printer to this mode. The PCL (PJL) commands to switch the default compatibility modes are: Forward ESC%-12345X@PJL DEFAULT LPARM:PCL LFONTCOMPATIBILITY=PCL6 @PJL RESET ESC%-12345X Backward ESC%-12345X@PJL DEFAULT LPARM:PCL LFONTCOMPATIBILITY=PCL5 @PJL RESET ESC%-12345X Specialty PCL Fonts The following table lists the font selection commands for forward and backward compatibility mode for each of the five specialty PCL fonts. Since the font selection commands for the forward and backward compatibility modes are identical, they are listed together in the table. Table 2-22: Forward and Backward Compatibility Font Selection Commands Standard PCL Emulation Font Name Forward and Backward Compatibility Mode Spacing Style Weight Typeface C39 Narrow 1 1 0 0 32774 C39 Regular 1 1 0 0 32772 C39 Wide 1 1 0 0 32777 OCR-A 1 0 0 0 23584 OCR-B 1 0 0 0 23590 1 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.

To determine if a font or typeface supports a symbol set, see the complete listing of PCL emulation fonts and symbol sets in the following tables: “Table 2-23: PCL Emulation Symbol Sets - Latin 1” on page 2-43, “Table 2-24: PCL Emulation Symbol Sets - Latin 2, Latin 5, Latin 6, Cyrillic, Greek” on page 2-48, and “Table 2-25: PCL Emulation Symbol Sets - Specials” on page 2-53. Table 2-23: PCL Emulation Symbol Sets - Latin 1 Latin 1 Typeface / Symbol Set Legal Windows 3.0 Latin 1 Windows 98 Latin 1 ISO 8859-1 Latin 1 (ECMA-94) ISO 8859-15 Latin 9 PC-8, Code Page 437 PC-8 Danish/Norwegian (437N) PC-850 Multilingual PC-858 Multilingual Euro PC-860 Portugal PC-861 Iceland PC-863 Canadian French PC-865 Nordic PC-1004 OS/2 ABICOMP Brazil/Portugal ABICOMP International Roman-8 Roman-9 Roman Extension PS Text MC Text Desk Top Ventura International Ventura US PJL Value LEGAL WIN30 WINL1 ISOL1 ISOL9 PC8 PC8DN PC850 PC858 ROMAN8 PSTEXT DESKTOP VNINTL VNUS Symbol Set ID 1U 9U 19U 0N 9N 10U 11U 12U 13U 20U 21U 23U 25U 9J 13P 14P 8U 4U 0E 10J 12J 7J 13J 14J Courier                         Courier Italic                         Courier Bold                         Courier Bold Italic                         CG Times                         CG Times Italic                         CG Times Bold                         CG Times Bold Italic                         Univers Medium                         Univers Medium Italic                         Univers Bold                         Univers Bold Italic                          Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

                        Times New Roman Italic                         Times New Roman Bold                         Times New Roman Bold Italic                         Arial                         Arial Italic                         Arial Bold                         Arial Bold Italic                         Letter Gothic                         Letter Gothic Italic                         Letter Gothic Bold                         Univers Condensed Medium                         Univers Condensed Medium Italic                         Univers Condensed Bold                         Univers Condensed Bold Italic                         Garamond Antiqua                         Garamond Kursiv                         Garamond Halbfett                         Garamond Kursiv Halbfett                         CG Omega                         Table 2-23: PCL Emulation Symbol Sets (Continued) - Latin 1 Latin 1 Typeface / Symbol Set Legal Windows 3.0 Latin 1 Windows 98 Latin 1 ISO 8859-1 Latin 1 (ECMA-94) ISO 8859-15 Latin 9 PC-8, Code Page 437 PC-8 Danish/Norwegian (437N) PC-850 Multilingual PC-858 Multilingual Euro PC-860 Portugal PC-861 Iceland PC-863 Canadian French PC-865 Nordic PC-1004 OS/2 ABICOMP Brazil/Portugal ABICOMP International Roman-8 Roman-9 Roman Extension PS Text MC Text Desk Top Ventura International Ventura US PJL Value LEGAL WIN30 WINL1 ISOL1 ISOL9 PC8 PC8DN PC850 PC858 ROMAN8 PSTEXT DESKTOP VNINTL VNUS Symbol Set ID 1U 9U 19U 0N 9N 10U 11U 12U 13U 20U 21U 23U 25U 9J 13P 14P 8U 4U 0E 10J 12J 7J 13J 14J  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

                        CG Omega Bold                         CG Omega Bold Italic                         Antique Olive                         Antique Olive Italic                         Antique Olive Bold                         Albertus Medium                         Albertus Extra Bold                         Clarendon Condensed Bold                         Marigold                         Coronet                         Helvetica                         Helvetica Italic                         Helvetica Bold                         Helvetica Bold Italic                         Helvetica Narrow                         Helvetica Narrow Italic                         Helvetica Narrow Bold                         Helvetica Narrow Bold Italic                         Palatino Roman                         Table 2-23: PCL Emulation Symbol Sets (Continued) - Latin 1 Latin 1 Typeface / Symbol Set Legal Windows 3.0 Latin 1 Windows 98 Latin 1 ISO 8859-1 Latin 1 (ECMA-94) ISO 8859-15 Latin 9 PC-8, Code Page 437 PC-8 Danish/Norwegian (437N) PC-850 Multilingual PC-858 Multilingual Euro PC-860 Portugal PC-861 Iceland PC-863 Canadian French PC-865 Nordic PC-1004 OS/2 ABICOMP Brazil/Portugal ABICOMP International Roman-8 Roman-9 Roman Extension PS Text MC Text Desk Top Ventura International Ventura US PJL Value LEGAL WIN30 WINL1 ISOL1 ISOL9 PC8 PC8DN PC850 PC858 ROMAN8 PSTEXT DESKTOP VNINTL VNUS Symbol Set ID 1U 9U 19U 0N 9N 10U 11U 12U 13U 20U 21U 23U 25U 9J 13P 14P 8U 4U 0E 10J 12J 7J 13J 14J  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

       Palatino Bold                         Palatino Bold Italic                         ITC Bookman Light                         ITC Bookman Light Italic                         ITC Bookman Demi                         ITC Bookman Demi Italic                         ITC Avant Garde Book                         ITC Avant Garde Book Oblique                         ITC Avant Garde Demi                         ITC Avant Garde Demi Oblique                         Century Schoolbook Roman                         Century Schoolbook Italic                         Century Schoolbook Bold                         Century Schoolbook Bold Italic                         ITC Zapf Chancery Medium Italic                         CourierPS                         CourierPS Oblique                         CourierPS Bold                         CourierPS Bold Oblique                         Table 2-23: PCL Emulation Symbol Sets (Continued) - Latin 1 Latin 1 Typeface / Symbol Set Legal Windows 3.0 Latin 1 Windows 98 Latin 1 ISO 8859-1 Latin 1 (ECMA-94) ISO 8859-15 Latin 9 PC-8, Code Page 437 PC-8 Danish/Norwegian (437N) PC-850 Multilingual PC-858 Multilingual Euro PC-860 Portugal PC-861 Iceland PC-863 Canadian French PC-865 Nordic PC-1004 OS/2 ABICOMP Brazil/Portugal ABICOMP International Roman-8 Roman-9 Roman Extension PS Text MC Text Desk Top Ventura International Ventura US PJL Value LEGAL WIN30 WINL1 ISOL1 ISOL9 PC8 PC8DN PC850 PC858 ROMAN8 PSTEXT DESKTOP VNINTL VNUS Symbol Set ID 1U 9U 19U 0N 9N 10U 11U 12U 13U 20U 21U 23U 25U 9J 13P 14P 8U 4U 0E 10J 12J 7J 13J 14J  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

       Times Italic                         Times Bold                         Times Bold Italic                         Helvetica Light ✘      ✘    ✘           ✘   Helvetica Light Oblique ✘      ✘    ✘           ✘   Helvetica Black ✘      ✘    ✘           ✘   Helvetica Black Oblique ✘      ✘    ✘           ✘   Line Printer 16                         POSTNET Barcode ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Narrow ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Regular ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Wide ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ OCR-A ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ OCR-B                    ✘ ✘ ✘   Wingdings ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Symbol ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ SymbolPS ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Zapf Dingbats ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Table 2-23: PCL Emulation Symbol Sets (Continued) - Latin 1 Latin 1 Typeface / Symbol Set Legal Windows 3.0 Latin 1 Windows 98 Latin 1 ISO 8859-1 Latin 1 (ECMA-94) ISO 8859-15 Latin 9 PC-8, Code Page 437 PC-8 Danish/Norwegian (437N) PC-850 Multilingual PC-858 Multilingual Euro PC-860 Portugal PC-861 Iceland PC-863 Canadian French PC-865 Nordic PC-1004 OS/2 ABICOMP Brazil/Portugal ABICOMP International Roman-8 Roman-9 Roman Extension PS Text MC Text Desk Top Ventura International Ventura US PJL Value LEGAL WIN30 WINL1 ISOL1 ISOL9 PC8 PC8DN PC850 PC858 ROMAN8 PSTEXT DESKTOP VNINTL VNUS Symbol Set ID 1U 9U 19U 0N 9N 10U 11U 12U 13U 20U 21U 23U 25U 9J 13P 14P 8U 4U 0E 10J 12J 7J 13J 14J  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

Typeface / Symbol Set Latin 2 Latin 5 Latin 6 Cyrillic Greek Windows 98 Latin 2 ISO 8859-2 Latin 2 PC-852 Latin 2 PC-8 Polish Mazovia PC-8 PC Nova Windows 98 Latin 5 ISO 8859-9 Latin 5 PC-857 Latin 5 (Turkish) PC-853 Latin 3 (Turkish) PC-Turkish (437T) Turkish-8 Windows 98 Latin 6 (Baltic) ISO 8859-10 Latin 6 PC-775 Baltic (PC-8 Latin 6) Windows 98 Cyrillic ISO 8859-5 Latin/Cyrillic PC-866 Cyrillic PC-855 Cyrillic Russian-GOST PC-8 Bulgarian Ukrainian Windows 98 Greek ISO 8859-7 Latin/Greek PC-869 Greece PC-851 Greece PC-8 Latin/Greek PC-8 Greek Alternate (437G) Greek-8 PJL Value WINL2 ISOL2 PC852 WINL5 ISOL5 PC8TK Symbol Set ID 9E 2N 17U 24Q 27Q 5T 5N 16U 18U 9T 8T 19L 6N 26U 9R 10N 3R 10R 12R 13R 14R 9G 12N 11G 10G 12G 14G 8G Courier                             Courier Italic                             Courier Bold                             Courier Bold Italic                             CG Times                             CG Times Italic                             CG Times Bold                             CG Times Bold Italic                             Univers Medium                             Univers Medium Italic                             Univers Bold                             Univers Bold Italic                             Times New Roman    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times New Roman Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times New Roman Bold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times New Roman BoldItalic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Arial    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Arial Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Arial Bold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

   ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Letter Gothic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Letter Gothic Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Letter Gothic Bold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Univers Condensed Medium    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Univers Condensed Medium Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Univers Condensed Bold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Univers Condensed Bold Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Garamond Antiqua    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Garamond Kursiv    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Garamond Halbfett    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Garamond Kursiv Halbfett    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CG Omega    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CG Omega Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CG Omega Bold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CG Omega Bold Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Antique Olive    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Antique Olive Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Table 2-24: PCL Emulation Symbol Sets (Continued) - Latin 2, Latin 5, Latin 6, Cyrillic, Greek Typeface / Symbol Set Latin 2 Latin 5 Latin 6 Cyrillic Greek Windows 98 Latin 2 ISO 8859-2 Latin 2 PC-852 Latin 2 PC-8 Polish Mazovia PC-8 PC Nova Windows 98 Latin 5 ISO 8859-9 Latin 5 PC-857 Latin 5 (Turkish) PC-853 Latin 3 (Turkish) PC-Turkish (437T) Turkish-8 Windows 98 Latin 6 (Baltic) ISO 8859-10 Latin 6 PC-775 Baltic (PC-8 Latin 6) Windows 98 Cyrillic ISO 8859-5 Latin/Cyrillic PC-866 Cyrillic PC-855 Cyrillic Russian-GOST PC-8 Bulgarian Ukrainian Windows 98 Greek ISO 8859-7 Latin/Greek PC-869 Greece PC-851 Greece PC-8 Latin/Greek PC-8 Greek Alternate (437G) Greek-8 PJL Value WINL2 ISOL2 PC852 WINL5 ISOL5 PC8TK Symbol Set ID 9E 2N 17U 24Q 27Q 5T 5N 16U 18U 9T 8T 19L 6N 26U 9R 10N 3R 10R 12R 13R 14R 9G 12N 11G 10G 12G 14G 8G  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

   ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Albertus Medium    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Albertus Extra Bold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Clarendon Condensed Bold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Marigold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Coronet    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Bold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Bold Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Narrow    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Narrow Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Narrow Bold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Narrow Bold Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Palatino Roman    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Palatino Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Palatino Bold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Palatino Bold Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Bookman Light    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Bookman Light Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Table 2-24: PCL Emulation Symbol Sets (Continued) - Latin 2, Latin 5, Latin 6, Cyrillic, Greek Typeface / Symbol Set Latin 2 Latin 5 Latin 6 Cyrillic Greek Windows 98 Latin 2 ISO 8859-2 Latin 2 PC-852 Latin 2 PC-8 Polish Mazovia PC-8 PC Nova Windows 98 Latin 5 ISO 8859-9 Latin 5 PC-857 Latin 5 (Turkish) PC-853 Latin 3 (Turkish) PC-Turkish (437T) Turkish-8 Windows 98 Latin 6 (Baltic) ISO 8859-10 Latin 6 PC-775 Baltic (PC-8 Latin 6) Windows 98 Cyrillic ISO 8859-5 Latin/Cyrillic PC-866 Cyrillic PC-855 Cyrillic Russian-GOST PC-8 Bulgarian Ukrainian Windows 98 Greek ISO 8859-7 Latin/Greek PC-869 Greece PC-851 Greece PC-8 Latin/Greek PC-8 Greek Alternate (437G) Greek-8 PJL Value WINL2 ISOL2 PC852 WINL5 ISOL5 PC8TK Symbol Set ID 9E 2N 17U 24Q 27Q 5T 5N 16U 18U 9T 8T 19L 6N 26U 9R 10N 3R 10R 12R 13R 14R 9G 12N 11G 10G 12G 14G 8G  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

   ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Bookman Demi Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Avant Garde Book    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Avant Garde Book Oblique    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Avant Garde Demi    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Avant Garde Demi Oblique    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Century Schoolbook Roman    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Century Schoolbook Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Century Schoolbook Bold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Century Schoolbook Bold Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Zapf Chancery Medium Italic    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CourierPS    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CourierPS Oblique    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CourierPS Bold    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CourierPS Bold Oblique    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times Roman    ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Table 2-24: PCL Emulation Symbol Sets (Continued) - Latin 2, Latin 5, Latin 6, Cyrillic, Greek Typeface / Symbol Set Latin 2 Latin 5 Latin 6 Cyrillic Greek Windows 98 Latin 2 ISO 8859-2 Latin 2 PC-852 Latin 2 PC-8 Polish Mazovia PC-8 PC Nova Windows 98 Latin 5 ISO 8859-9 Latin 5 PC-857 Latin 5 (Turkish) PC-853 Latin 3 (Turkish) PC-Turkish (437T) Turkish-8 Windows 98 Latin 6 (Baltic) ISO 8859-10 Latin 6 PC-775 Baltic (PC-8 Latin 6) Windows 98 Cyrillic ISO 8859-5 Latin/Cyrillic PC-866 Cyrillic PC-855 Cyrillic Russian-GOST PC-8 Bulgarian Ukrainian Windows 98 Greek ISO 8859-7 Latin/Greek PC-869 Greece PC-851 Greece PC-8 Latin/Greek PC-8 Greek Alternate (437G) Greek-8 PJL Value WINL2 ISOL2 PC852 WINL5 ISOL5 PC8TK Symbol Set ID 9E 2N 17U 24Q 27Q 5T 5N 16U 18U 9T 8T 19L 6N 26U 9R 10N 3R 10R 12R 13R 14R 9G 12N 11G 10G 12G 14G 8G  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

   ✘     ✘      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Light ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Light Oblique ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Black ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Black Oblique ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Line Printer 16                             POSTNET Barcode ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Narrow ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Regular ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ C39 Wide ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ OCR-A ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ OCR-B      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Wingdings ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Symbol ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ SymbolPS ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Zapf Dingbats ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Table 2-24: PCL Emulation Symbol Sets (Continued) - Latin 2, Latin 5, Latin 6, Cyrillic, Greek Typeface / Symbol Set Latin 2 Latin 5 Latin 6 Cyrillic Greek Windows 98 Latin 2 ISO 8859-2 Latin 2 PC-852 Latin 2 PC-8 Polish Mazovia PC-8 PC Nova Windows 98 Latin 5 ISO 8859-9 Latin 5 PC-857 Latin 5 (Turkish) PC-853 Latin 3 (Turkish) PC-Turkish (437T) Turkish-8 Windows 98 Latin 6 (Baltic) ISO 8859-10 Latin 6 PC-775 Baltic (PC-8 Latin 6) Windows 98 Cyrillic ISO 8859-5 Latin/Cyrillic PC-866 Cyrillic PC-855 Cyrillic Russian-GOST PC-8 Bulgarian Ukrainian Windows 98 Greek ISO 8859-7 Latin/Greek PC-869 Greece PC-851 Greece PC-8 Latin/Greek PC-8 Greek Alternate (437G) Greek-8 PJL Value WINL2 ISOL2 PC852 WINL5 ISOL5 PC8TK Symbol Set ID 9E 2N 17U 24Q 27Q 5T 5N 16U 18U 9T 8T 19L 6N 26U 9R 10N 3R 10R 12R 13R 14R 9G 12N 11G 10G 12G 14G 8G  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

Specials Typeface / Symbol Set Ventura Math PS Math Math-8 Pi font Microsoft Publishing PC-911 Katakana POSTNET Barcode OCR-A OCR-B C39 Bar Code (Upper Case) C39 Bar Code (plus Lower Case) C39 Bar Code (plus Human Readable) Symbol Wingdings Ventura ITC Zapf Dingbats PS ITC Zapf Dingbats PCL ITC Zapf Dingbats PJL Value VNMATH PSMATH MATH8 PIFONT MSPUBL Symbol Set ID 6M 5M 8M 15U 6J 3K 15Y 0O 1O 9Y 109Y 209Y 19M 579L 9L 10L 14L Courier      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Courier Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Courier Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Courier Bold Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CG Times      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CG Times Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CG Times Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CG Times Bold Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Univers Medium      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Univers Medium Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Univers Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Univers Bold Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times New Roman      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times New Roman Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times New Roman Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times New Roman BoldItalic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Arial      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Arial Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Arial Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

     ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Letter Gothic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Letter Gothic Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Letter Gothic Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Univers Condensed Medium      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Univers Condensed Medium Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Univers Condensed Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Univers Condensed Bold Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Garamond Antiqua      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Garamond Kursiv      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Garamond Halbfett      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Garamond Kursiv Halbfett      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CG Omega      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CG Omega Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CG Omega Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CG Omega Bold Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Antique Olive      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Antique Olive Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Antique Olive Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Albertus Medium      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Albertus Extra Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Table 2-25: PCL Emulation Symbol Sets (Continued) - Specials Specials Typeface / Symbol Set Ventura Math PS Math Math-8 Pi font Microsoft Publishing PC-911 Katakana POSTNET Barcode OCR-A OCR-B C39 Bar Code (Upper Case) C39 Bar Code (plus Lower Case) C39 Bar Code (plus Human Readable) Symbol Wingdings Ventura ITC Zapf Dingbats PS ITC Zapf Dingbats PCL ITC Zapf Dingbats PJL Value VNMATH PSMATH MATH8 PIFONT MSPUBL Symbol Set ID 6M 5M 8M 15U 6J 3K 15Y 0O 1O 9Y 109Y 209Y 19M 579L 9L 10L 14L  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

     ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Marigold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Coronet      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Bold Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Narrow      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Narrow Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Narrow Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Narrow Bold Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Palatino Roman      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Palatino Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Palatino Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Palatino Bold Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Bookman Light      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Bookman Light Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Bookman Demi      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Bookman Demi Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Avant Garde Book      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Avant Garde Book Oblique      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Table 2-25: PCL Emulation Symbol Sets (Continued) - Specials Specials Typeface / Symbol Set Ventura Math PS Math Math-8 Pi font Microsoft Publishing PC-911 Katakana POSTNET Barcode OCR-A OCR-B C39 Bar Code (Upper Case) C39 Bar Code (plus Lower Case) C39 Bar Code (plus Human Readable) Symbol Wingdings Ventura ITC Zapf Dingbats PS ITC Zapf Dingbats PCL ITC Zapf Dingbats PJL Value VNMATH PSMATH MATH8 PIFONT MSPUBL Symbol Set ID 6M 5M 8M 15U 6J 3K 15Y 0O 1O 9Y 109Y 209Y 19M 579L 9L 10L 14L  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

     ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Avant Garde Demi Oblique      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Century Schoolbook Roman      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Century Schoolbook Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Century Schoolbook Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Century Schoolbook Bold Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ITC Zapf Chancery Medium Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CourierPS      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CourierPS Oblique      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CourierPS Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ CourierPS Bold Oblique      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times Roman      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times Bold      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Times Bold Italic      ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Light ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Light Oblique ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Black ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Helvetica Black Oblique ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Line Printer 16       ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ POSTNET Barcode ✘ ✘ ✘ ✘ ✘ ✘  ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ Table 2-25: PCL Emulation Symbol Sets (Continued) - Specials Specials Typeface / Symbol Set Ventura Math PS Math Math-8 Pi font Microsoft Publishing PC-911 Katakana POSTNET Barcode OCR-A OCR-B C39 Bar Code (Upper Case) C39 Bar Code (plus Lower Case) C39 Bar Code (plus Human Readable) Symbol Wingdings Ventura ITC Zapf Dingbats PS ITC Zapf Dingbats PCL ITC Zapf Dingbats PJL Value VNMATH PSMATH MATH8 PIFONT MSPUBL Symbol Set ID 6M 5M 8M 15U 6J 3K 15Y 0O 1O 9Y 109Y 209Y 19M 579L 9L 10L 14L  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘    Table 2-25: PCL Emulation Symbol Sets (Continued) - Specials Specials Typeface / Symbol Set Ventura Math PS Math Math-8 Pi font Microsoft Publishing PC-911 Katakana POSTNET Barcode OCR-A OCR-B C39 Bar Code (Upper Case) C39 Bar Code (plus Lower Case) C39 Bar Code (plus Human Readable) Symbol Wingdings Ventura ITC Zapf Dingbats PS ITC Zapf Dingbats PCL ITC Zapf Dingbats PJL Value VNMATH PSMATH MATH8 PIFONT MSPUBL Symbol Set ID 6M 5M 8M 15U 6J 3K 15Y 0O 1O 9Y 109Y 209Y 19M 579L 9L 10L 14L  Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Grey-shaded cells: In the backward compatability mode, this font is not supported or this font does not support this symbol set.

19 symbol sets. Table 2-26: ISO PCL Emulation Symbol Sets Symbol Set ID Symbol Set / Typeface 1E ISO 4: United Kingdom 0U ISO 6: ASCII 0S ISO 11: Swedish for Names 0I ISO 15: Italian 2S ISO 17: Spanish 1G ISO 21: German 0D ISO 60: Norwegian Version 1 1F ISO 69: French 2U ISO 2: IRV (International Ref Version) 0F ISO 25: French 0G ISO: HP German 0K ISO 14: JIS ASCII 2K ISO 57: Chinese 3S ISO 10: Swedish 1S ISO: HP Spanish 6S ISO 85: Spanish 4S ISO 16: Portuguese 5S ISO 84: Portuguese 1D ISO 61: Norwegian Version 2

structure, or syntax. It also demonstrates how you can link commands to abbreviate them. Control Codes Control Codes are single-character instructions. Commands PCL commands are multibyte strings (also known as “escape sequences”) that begin with the Escape control code (ESC, ←, decimal 27, or hexadecimal 1B). The ESC control code notifies the printer that the characters that follow are to be interpreted as part of a command and are not control codes or data to be printed. Table 2-27: Control Codes Code Dec Hex Function Result BS 8 08 Backspace Moves the cursor toward the left margin one horizontal space equal to the last printed character HT 9 09 Horizontal Tab Moves the cursor to the next defined tab stop LF 10 0A Line Feed Advances the cursor to the same horizontal position on the following line as determined by either the Vertical Motion Index (VMI) or Set Line Spacing command FF 12 0C Form Feed Advances the cursor to the same horizontal position at the top margin of the next page CR 13 0D Carriage Return Moves the cursor to the left margin SP 32 20 Space Moves the cursor to the right one column SI 15 0F Primary Font Selects the primary font SO 14 0E Secondary Font Selects the secondary font

ESC & a # C Spaces have been added to this example for readability. The command parameter variables are indicated by a number sign (#). Command Parameters A command parameter sets the value for a command. This value stays constant until either a different value resets the command or a command resets the printer to the default values. For example, after the printer receives a command that selects a right margin beginning at column 63, the right margin of each printed page begins at column 63. That margin stays constant until a right margin command with a different value resets it or until the printer is reset. Parameters for each command are listed in the command tables beginning on page 2-62. Use the Symbol Set Tables to determine the decimal or hexadecimal value for each parameter. To determine a decimal or hex value, first locate the value of the parameter you require in the Symbol Set Table. The decimal value is the value shown in the bottom of the cell or box with that parameter. To find a hex value, go straight up the grid from the desired parameter and read the value in the top heading. This is the first character of the hex value. Next, go straight across the grid to the left of the parameter and read the value in the left column heading. This is the second character of the hex value. For example, ESC (←) is coded 1B in Hex and 27 in decimal. (Any one of the three values ←, 1B, or 27 might be used in your application. Read your documentation to determine which to use.) The example on the following page sets the pitch of the primary font to 16.66 characters per inch. Table 2-28: Description of Command Structure Element Description ESC Decimal 27 or hex 1B & Parameterized character from American National Standard Code for Information Interchange (ASCII) table (range 33 to 47 decimal) a Group character from ASCII table (range 96 to 126 decimal) that specifies a group type of control # Decimal character string value within specified numeric ranges; may be preceded by a + or – sign and contain a decimal point C Termination character from ASCII table (range 64 to 94 decimal)

• Hex: 1B 28 73 31 36 2E 36 36 48 Use the plus symbol (+) or the minus symbol (–) to select a position relative to the current cursor position. For example: ESC&a6C Move to horizontal cursor position, column six ESC&a+6C Move six columns to the right of the current position ESC&a-6C Move six columns to the left of the current position Linking Commands You can combine PCL emulation commands by linking them if the first 3 bytes of the commands are identical. The combined, short form sends the first 3 bytes only once in the string. To combine commands: • Use the first 3 bytes (characters) of the command only once at the start of the command string. • Make the last letter of each command in the string lowercase. • Capitalize the last letter of the string. For example, notice that the first 3 bytes of these two commands are the same: ESC(s10H Select 10 characters per inch ESC(s4099T Select Courier typeface To combine these two commands, use this form: ESC(s10h4099T which is 3 bytes shorter than the long form: ESC(s10HESC(s4099T You can combine more than two commands; for example, you can add Select Stroke Weight Bold (ESC(s3B) to the previous two commands: ESC(s10h3b4099T or in the long form: ESC(s10HESC(s3BESC(s4099T

See the following tables for a listing of the commands grouped by function. To determine which commands your printer supports, see “Table A-1: PCL Emulation Commands” on page A-1. PCL Emulation Commands by Function Table 2-29: Job Control Command / Parameters Function / Result ESCE Printer Reset • Prints any partial pages. • Resets printer environment to defaults. • Deletes all temporary downloaded resources. ESC&d#A 0 = Collation off 1 ... 999 (number of Copies) Number of Collated Copies Turns collation of pages off or sets the number of collated copies. ESC&l#X # = number of Copies (1 to 32767) Default = 1 Number of Copies Affects the page currently in process and subsequent pages. ESC&l#S 0 Single-Sided (Default) 1 Duplex Long-Edge Binding 2 Duplex Short-Edge Binding 100 Manual Duplex First Sides 101 Manual Duplex Second Sides Simplex/Duplex Print Long-edge or short-edge binding refers to the side of the physical page where binding occurs. ESC&l#U # = number of Decipoints Range = -32767 to 32767 (1 Decipoint = 1/720 inch) Default = 0 Long-Edge Offset Registration Also known as Left Offset. Adjusts placement of logical page along the width of the physical page. ESC&l#Z # = number of Decipoints Range = -32767 to 32767 (1 Decipoint = 1/720 inch) Default = 0 Short-Edge Offset Registration Also known as Top Offset. Adjusts placement of logical page along the length of the physical page.

200, 225, 240, 288, 300, 360, 400, 450, 480, 600, 720, 800, 900, 1200, 1440, 1800, 2400, 3600, 7200) Default = 300 units per inch Unit of Measure Sets the size for the PCL Unit (units per inch). The Unit of Measure defines the unit used in the following commands: • Horizontal Cursor Position by PCL Unit (ESC*p#X) • Vertical Cursor Position by PCL Unit (ESC*p#Y) • Horizontal Rectangle Size by PCL Unit (ESC*c#A) • Vertical Rectangle Size by PCL Unit (ESC*c#B) The Unit of Measure also affects the rounding of character escapements and the Horizontal Motion Index. Note: This command does not affect the interpretation of binary raster data for bitmapped fonts, raster graphics, or user defined fill patterns. ESC%–12345X Universal Exit Language (UEL) / Start of PJL This command terminates the current printer language and allows switching into PJL. For more information, see “UNIVERSAL EXIT LANGUAGE Command” on page 3-2. Table 2-29: Job Control (Continued) Command / Parameters Function / Result

Command / Parameters Function / Result ESC&l#A Paper 1 Executive 2 Letter 3 Legal 4, 10 Folio 6, 11 Ledger (11 x 17) 13, 25 A5 Paper 15 Statement 26 A4 Paper 27 A3 Paper 12, 45 B5 Paper 46 B4 Paper 101 Custom Paper/Universal Envelopes 80 Monarch 7 3/4 81 Commercial 10 89 Commercial 9 90 DL 91 C5 99, 100 B5 Envelope 600 Other Envelope Set Page Size Selects the physical size of the paper, which also determines the logical page dimensions. See the tables beginning on page 2-4 for the paper and envelope dimensions your printer supports. If the requested page size is not in the requested source or if no source is requested, sources are checked for the requested size in the following order: multipurpose feeder, tray 1, tray 2, tray 3, tray 4, tray 5, and envelope feeder. Notes: • When the printer receives the page size command, any partially formatted pages are printed, and the cursor position and margins are reset. • Duplex printing is not supported on any envelope. • The size loaded in the active source is checked to see if it matches the requested size. If the multipurpose feeder is configured as Cassette or Manual, the same applies; however, if the multipurpose feeder is configured as First and media is loaded in the multipurpose feeder, then, regardless of media size, it is the source used until it is empty. ESC&l#H 0 Active Source or Eject Page 1 Tray 1 (Default) 2 Manual Paper Feed 3 Manual Envelope Feed 4 Tray 2 5 Tray 3 6 Optional Envelope Feeder 7 Auto Select 8 Multipurpose Feeder 20 Tray 4 21 Tray 5 62 Optional Paper Source Paper Source Selects the paper feed source. Note: If the paper source is changed for the back of a duplexed page, a blank back page prints, the paper source changes, and the information for the back side of the page is printed on the front side of a page sent from the new paper source. ESC&f#G # = number of Decipoints (1 Decipoint = 1/720 inch) Set Universal Width Sets the width of the Universal size in decipoints. ESC&f#F # = number of Decipoints (1 Decipoint = 1/720 inch) Set Universal Height Sets the height of the Universal size in decipoints.

Sets the feed direction of Universal size. Feed direction means which side of the print media, either the short edge or the long edge, feeds first through the printer first. ESC&f#W [custom name] # = number of bytes in the custom name Set Universal Custom Name Sets the user-specified custom name for the Universal paper size being used. ESC&l#O 0 Portrait (Default) 1 Landscape 2 Reverse Portrait 3 Reverse Landscape Select Orientation Specifies the position of the logical page with respect to the physical page. Note: Resets margins, number of printable lines per page, and cursor position. ESC&a#P # = Degrees (0, 90, 180, 270) Default = 0 Print Direction Rotates coordinate system counter-clockwise in 90° increments with respect to current orientation. Note: Margins are not rotated or cleared. ESC&c#T 0 Horizontal Printing -1 Vertical Rotated Printing Character Text Path Direction Vertically rotates text for use in vertical writing, such as printing Japanese text. ESC&a#L # = Column Default = 0 Set Left Margin Sets left margin to left edge of the designated column. Note: The column width is defined by the space character of the active font and the Horizontal Motion Index (HMI). ESC&a#M # = Column Default = Logical Page Width Set Right Margin Sets right margin to right edge of the designated column. Note: The column width is defined by the space character of the active font and the HMI. ESC9 Clear Horizontal Margins Clears left and right margins. ESC&l#E # = number of Lines Default = 3 (1/2 inch) Set Top Margin Sets the number of lines between the top of the physical page and first line of print. Line height is determined by the current Vertical Motion Index (VMI) and/or line spacing value. Note: Setting a top margin of 0 results in the first line of text falling outside of the printable area. ESC&l1T Job Separation This command is parsed and ignored. Table 2-30: Page Control (Continued) Command / Parameters Function / Result

Default = 60 or 64 (Country specific) Set Text Length Sets the bottom margin length in lines, measured from the first line of the page. Text Length equals Logical Page Length –1 inch (–1/2 inch for top and –1/2 inch for bottom). ESC&l#G 0 Auto Select (uses the active bin) 1 Standard Bin 2 Bin 1 or Rear Bin 3 Bin 1 or Rear Bin 4 Bin 2 5 Bin 3 6 Bin 4 7 Bin 5 8 Bin 6 9 Bin 7 10 Bin 8 11 Bin 9 12 Bin 10 Set Output Bin Sets the exit path to direct paper to one of the output bins. ESC&l#L 0 Off 1 On (Default) Skip Perforation Perforation area includes the area from the bottom margin of the current page to the top margin of the next page. When skipping perforations, a line feed past the bottom margin ejects a page and places the cursor at the top margin of the next page. ESC&k#H # = number of 1/120 inch increments (Valid to 4 decimal places) Set Horizontal Motion Index (HMI) Sets the width of all characters for fixed-space fonts. Sets only the width of the space for proportional spaced fonts. ESC&l#C # = number of 1/48 inch increments (Valid to 4 decimal places) Default = 8 Set Vertical Motion Index (VMI) Sets Vertical Motion Index in 1/48 inch increments. The VMI determines the vertical distance between lines. Notes: • For some printers, you can change the default VMI from the printer operator panel or through MarkVision Professional by using the Lines Per Page menu item. Refer to your printer user documentation for more information. • Use of this command alters any previous Set Line Spacing command settings. Table 2-30: Page Control (Continued) Command / Parameters Function / Result

8 8 lines/inch 12 12 lines/inch 16 16 lines/inch 24 24 lines/inch 48 48 lines/inch Set Line Spacing (Alternative Method) Specifies VMI in lines per inch. Notes: • For some printers, you can change the default VMI from the printer operator panel or through MarkVision Professional by using the Lines Per Page menu item. Refer to your printer user documentation for more information. • Unsupported values are ignored. • Use of this command alters any earlier VMI setting. ESC&a#G 0 Next Side 1 Front Side 2 Back Side Duplex Page Side Selection Specifies which physical page side to print next when duplex printing. Note: When the duplex option is not installed, this command causes a conditional page eject. ESC&l#P # = number from 0 to 14 0 = default page length is used (1 to 14 new page length is set) Set Page Length Sets the logical page length in number of lines. Notes: • This command is sent at the beginning of a page in a print job and prior to any printable data. • When the command is sent, the current page is closed and printed. • Unsupported values are ignored. ESC&k#W 5 Turn Text Scale Mode OFF 6 Turn Text Scale Mode ON Text Scale Mode Allows 66 lines of text at six lines per inch to print on an effective page length of 10 1/2 inches. Notes: • Unsupported values are ignored. • The command is ignored when the printer is in landscape mode. Table 2-30: Page Control (Continued) Command / Parameters Function / Result

Command / Parameters Function / Result ESC&n#W [operation] [string] # = number of data bytes that make up the operation and string Operation operation = 100 or 1 byte = 0x64 or 'd' ascii For example: 100 Media Select String string = See Alphanumeric String list at right Alphanumeric ID Selects the media type using a character string. The string ID is case sensitive and may be up to 511 bytes long. The string ID specifies the media type requested. Media Type Alphanumeric String Plain Paper Plain Bond Bond Transparency Transparency Card Stock Card Stock Labels Labels Letterhead Letterhead Pre-printed Preprinted Colored Paper Color Envelope Envelope Custom Type 1 Custom Type 1 or User Type 1 Custom Type 2 Custom Type 2 or User Type 2 Custom Type 3 Custom Type 3 or User Type 3 Custom Type 4 Custom Type 4 or User Type 4 Custom Type 5 Custom Type 5 or User Type 5 Custom Type 6 Custom Type 6 or User Type 6 For example, the following shows the command and parameters used to select bond paper: ESC&n5WdBond To select letterhead paper: ESC&n11WdLetterhead Table 2-32: Cursor Positioning Command / Parameters Function / Result ESC&a#C # = number of Columns1 Horizontal Cursor Position (in Columns) Moves the cursor to a new position along the horizontal axis. Note: The column width is determined by the space character width of the active font or the Horizontal Motion Index (HMI), if set. ESC&a#H # = number of Decipoints1 (1 Decipoint = 1/720 inch) Horizontal Cursor Position (in Decipoints) Moves the cursor to a new position along the horizontal axis. ESC*p#X # = number of PCL Units1 Horizontal Cursor Position (in PCL Units) Moves the cursor to a new position along the horizontal axis. Note: PCL units are set by the Unit-of-Measure Command. 1 Parameter preceded by + or – sign denotes a relative cursor move from the current cursor position. Parameter without a sign denotes an absolute cursor move from the top left margin.

Vertical Cursor Position (in Rows) Moves the cursor to a new position along the vertical axis. Note: Row height is determined by either the Vertical Motion Index (VMI) or the Set Line Spacing Command. ESC&a#V # = number of Decipoints1 (1 Decipoint = 1/720 inch) Vertical Cursor Position (in Decipoints) Moves the cursor to a new position along the vertical axis. ESC*p#Y # = number of PCL Units1 Vertical Cursor Position (in PCL Units) Moves the cursor to a new position along the vertical axis. Note: PCL units are set by the Unit-of-Measure Command. ESC= Half Line-Feed Moves the cursor down 1/2 line (1/2 of the current VMI). ESC&k#G 0 CR=CR, LF=LF, FF=FF (Default) 1 CR=CR+LF, LF=LF, FF=FF 2 CR=CR, LF=CR+LF, FF=CR+FF 3 CR=CR+LF, LF=CR+LF, FF=CR+FF Set Line Termination Controls how the printer responds to the Carriage Return (CR), Line Feed (LF), and Form Feed (FF) control codes. ESC&f#S 0 Push 1 Pop Push / Pop Cursor Position Sets up a cursor position stack for storing and recalling various cursor positions. The stack can store up to 20 cursor positions. Table 2-32: Cursor Positioning (Continued) Command / Parameters Function / Result 1 Parameter preceded by + or – sign denotes a relative cursor move from the current cursor position. Parameter without a sign denotes an absolute cursor move from the top left margin.

parameters set following the best fit selection rules. Table 2-33: Font Selection Command / Parameters Function / Result ESC(# (primary) ESC)# (secondary) # = symbol set ID Default = 10U (PC-8) or 12U (PC-850), [Country specific] Select Symbol Set See “Font and Symbol Set Support for the Lexmark X422” on page 2-9, or “Font and Symbol Set Support for the Lexmark C510(n)” on page 2-19 for more information. Note: The line-draw characters are contained in the symbol set ID 10U, PC-8. The non-U.S. characters are contained in symbol set ID 12U, PC-850. ESC(s#P (primary) ESC)s#P (secondary) 0 Fixed (Default) 1 Proportional Select Spacing Selects a font with proportional or fixed spacing. ESC(s#H (primary) ESC)s#H (secondary) # = characters per inch Default = 10 Select Pitch Selects the number of characters per inch (cpi) for a fixed-space bitmapped or monospaced scalable font. Valid to 2 decimal places. Note: Pitch is not needed for proportional spaced fonts. ESC(s#V (primary) ESC)s#V (secondary) # = height in points (.25 to 999.75) Default = 12 Height (Select Point Size) Sets the font height in points. Valid to 2 decimal places. Note: Point size is not needed for monospaced fonts. For fonts larger than 12 points, it may be necessary to change the line spacing. ESC(s#S (primary) ESC)s#S (secondary) 0 Upright (Default) 1 Italic 4 Condensed 5 Condensed Italic 8 Compressed 24 Expanded 32 Outline 64 Inline 128 Shadowed 160 Outline Shadowed Select Style Identifies the physical traits of a character and the composition of the font symbols. Note: You can only use this command to select fonts currently available in the printer. It cannot alter the appearance of the available fonts.

Selects a font with a particular thickness. Note: This command will not alter the stroke weight of an available font. ESC(s#T (primary) ESC)s#T (secondary) # Typeface identifier (0 - 65535) Note: For a list of typeface numbers, see Table 2-4 on page 2-10 and Table 2-9 on page 2-20. Select Typeface Selects the best fit font design. To obtain the typeface values for downloaded fonts, print the font list from the printer operator panel or through MarkVision Professional. Refer to your printer user documentation for more information. On the printout, the typeface number is the last number on the font selection command example line. The example line is below the name of the font. In the following example, the typeface number is underlined: RO Courier <>(<><>(s0p<>h0s0b4099T ESC(#X (primary) ESC)#X (secondary) # = Font ID (0 - 32767) Select Font by Font ID Selects the font by the identification number. ESC(3@ (primary) ESC)3@ (secondary) Select Default Font Sets all font selection characteristics to the Default Font. ESC&p#X[data] # = number of data of bytes to print as text Transparent Print Data Prints the next number of bytes as text. ESC&d#D 0,1 Fixed 2 Fixed - double 3 Floating 4 Floating - double Select Underline Type (Enable) Notes: • Fixed underline is drawn 5 pels below cursor position. • Floating underline position is determined by all the positions of the characters with descenders in the fonts that are to be underlined. • Underline thickness is 1/100 inch. ESC&d@ Underline - Disable Table 2-33: Font Selection (Continued) Command / Parameters Function / Result

21 1 or 2 byte characters 31 1 or 2 byte characters 38 1 or 2 byte characters 1008 1, 2, or 3 byte characters (UTF-8) Text Parsing Method Communicates to the PCL parser whether character codes are interpreted as 1-byte or 2-byte character codes. ESC&k#S 0 10.00 cpi 2 16.66 cpi 4 12.00 cpi Select Primary and Secondary Pitch Selects the pitch for the primary and secondary font. Table 2-34: User-Defined Symbol Set Command / Parameters Function / Result ESC*c#R # = Symbol Set ID (0 - 32767) Default = 0 Symbol Set ID Code Sets the symbol set identification for the symbol set downloaded. ESC(f#W[data] # = number of data bytes Define Symbol Set Contains the data for the user-defined symbol sets. ESC*c#S 0 Delete all (temporary and permanent) 1 Delete all temporary 2 Delete current (ID) 4 Make current temporary 5 Make current permanent Symbol Set Control Manages user-defined symbol sets. Table 2-33: Font Selection (Continued) Command / Parameters Function / Result

Command / Parameters Function / Result ESC*c#D # = Font ID # (0 - 32767) Default = 0 Set Font ID Sets the identification number for the font being downloaded. ESC)s#W[data] # = number of data bytes Load Font Header Downloads soft font header information. Note: Set Font ID before using this command. ESC*c#F 0 Delete all (temporary and permanent) 1 Delete all temporary 2 Delete previous font ID 3 Delete previous specified character 4 Make previous font ID temporary 5 Make previous font ID permanent 6 Copy current font Caution: Font Control Manages soft fonts. ESC*c#E # = Code Point (0 - 65536) Default = 0 Set Character Code Sets the decimal code point associated with the next character downloaded or deleted. ESC(s#W[data] # = number of data bytes Load Character Downloads character descriptor and data to the current character code. Table 2-36: Macros Command / Parameters Function / Result ESC&f#Y # = Macro ID (0 - 32767) Default = 0 Set Macro ID Sets the ID for the macro you have created on flash or disk. ESC&f#X 0 Start definition 1 End definition 2 Execute macro (previous macro ID) 3 Call macro (previous macro ID) 4 Enable overlay (previous macro ID) 5 Disable overlay 6 Delete all macros 7 Delete all temporary macros 8 Delete current macro ID 9 Make last ID temporary 10 Make last ID permanent Macro Control Manages use of macros. Notes: • GL/2 commands are supported inside macros. • Only call and execute macro commands are allowed within a macro. • A macro may call or execute another macro. This is called nesting. A maximum of two nesting levels are allowed, for a total of three levels. See “Macros” on page 2-95 for additional information.

Command / Parameters Function / Result ESC*c#G Gray Scale Fills 0 White (default) 1-2 2% gray 3-10 10% gray 11-20 15% gray 21-35 30% gray 36-55 45% gray 56-80 70% gray 81-99 90% gray 100 100% gray (Black) Cross-Hatch Fills 1 Horizontal line 2 Vertical line 3 Diagonal line 4 Diagonal line 5 Square grid 6 Diagonal grid User-Defined Patterns # = User-Defined Pattern ID Area Fill ID Selects pattern used to fill a rectangular area. Note: This command is also used to set the user-defined pattern ID. ESC*v#N 0 Transparent (Default) 1 Opaque Source Transparency Mode Affects copying of white pixels from the source onto the destination image. ESC*v#O 0 Transparent (Default) 1 Opaque Pattern Transparency Mode Affects copying of white pixels from the pattern onto the destination image. ESC*l#O # = logical operation, value (0 to 255) Default = 252 Logical Operation Defines boolean operations to be performed on data already printed and data about to be printed. ESC*l#R 0 Grid Intersection (Default) 1 Grid Centered Pixel Placement Determines how pixels are placed for a rectangular area fill and GL/2 objects. Pixel Placement does not affect text or raster images. ESC*v#T 0 Solid Black (Default) 1 Solid White 2 Gray Shading Pattern 3 Cross-Hatch Pattern 4 User Defined Pattern 9 True gray Level Fill Select Current Pattern Selects pattern used when printing text and raster images.

Command / Parameters Function / Result ESC*c#W[data] # = number of data bytes User-Defined Pattern Downloads binary pattern data. ESC*p#R 0 Rotate with print (Default) 1 Fixed Set Pattern Reference Point Sets pattern reference point to the current cursor position for user- defined patterns. Note: Default pattern reference point is the upper left corner of logical page. ESC*c#Q 0 Delete all patterns (temporary and permanent) 1 Delete all temporary patterns 2 Delete pattern (last ID specified) 4 Make pattern of last ID # temporary 5 Make pattern of last ID # permanent Caution: Pattern Control Manages use of user-defined patterns. Note: Use Area Fill ID command (ESC*c#G) to set ID. Table 2-39: Rectangular Area Fill Graphics Command / Parameters Function / Result ESC*c#H # = Number of Decipoints (0 - 32767) (1 Decipoint = 1/720 inch) Default = 0, valid to 4 decimal places Horizontal Rectangle Size (in Decipoints) Specifies the rectangle width in decipoints. ESC*c#A # = Number of PCL Units (0 - 32767) Default = 0 Horizontal Rectangle Size (in PCL Units) Specifies the rectangle width in PCL units. Note: Size of PCL Units is set by Unit-of-Measure command. ESC*c#V # = Number of Decipoints (0 - 32767) (1 Decipoint = 1/720 inch) Default = 0, valid to 4 decimal places Vertical Rectangle Size (in Decipoints) Specifies the rectangle height in decipoints. ESC*c#B # = Number of PCL Units (0 - 32767) Default = 0 Vertical Rectangle Size (in PCL Units) Specifies the rectangle height in PCL units. Note: Size of PCL Units is set by Unit-of-Measure command.

0 White (default) 1-2 2% Gray 3-10 10% Gray 11-20 15% Gray 21-35 30% Gray 36-55 45% Gray 56-80 70% Gray 81-99 90% Gray 100 100% Gray (Black) Cross-Hatch Fills 1 Horizontal Line 2 Vertical Line 3 Diagonal Line 4 Diagonal Line 5 Square Grid 6 Diagonal Grid User-Defined Patterns # = User-Defined Pattern ID Area Fill ID Selects pattern used to fill rectangle area. Note: This command is also used to set the user-defined pattern ID. ESC*c#P 0 Black Fill (Default) 1 White Fill 2 Gray Fill 3 Pre-Defined Cross-Hatch Pattern Fill 4 User-Defined Pattern 5 Current Pattern Fill 9 True gray Level Fill Fill Rectangular Area Fills a rectangular area defined by Horizontal and Vertical Rectangle Sizes with selected pattern. Table 2-39: Rectangular Area Fill Graphics (Continued) Command / Parameters Function / Result

Command / Parameters Function / Result ESC*t#R 75 75 dpi 100 100 dpi 150 150 dpi 200 200 dpi 300 300 dpi 600 600 dpi 1200 1200 dpi Raster Resolution Note: 200 dpi is only supported when the printer is operating in 600 dpi or 1200 dpi mode. ESC*r#F 0 Rotate with print 3 Fixed (Default) Raster Graphics Presentation Sets the Raster Image Orientation in relation to the logical page. ESC*r#S # = Number of Input Pixels Raster Width (Source) Sets width of clip window for raster graphics. ESC*r#T # = Number of Raster Lines Raster Height (Source) Sets height of clip window for raster graphics. ESC*r#A 0 Left Graphics Margin at 0 (Default) 1 Current Cursor Position 2 At logical left page limit with scaling On 3 At current cursor position with scaling On Start Raster Graphics Sets the left margin for raster graphics. ESC*b#V[data] # = Number of Data Bytes Transfer Raster Data by Plane This command is used when the raster data is encoded by plane as specified by the Simple Color command or the Configure Image Data command. The command sends each plane in the row except the last. ESC*b#Y # = Number of Raster Lines Y Offset Moves cursor position down by the specified number of raster lines.

byte 3 Delta Row 5 Adaptive Compression 9 Replacement Delta Row 999 Zlib 1002 Group 4 1003 Group 3 one dimensional 1004 Group 3 two dimensional K=2 1005 Group 3 two dimensional K=4 1006 TIFF word (16 bit) 1007 TIFF double-word (32 bit) 1008 Adaptive compression (includes TIFF word and TIFF double-word) Set Raster Compression Mode Identifies the compression mode the host uses to transfer RIG data. For instance, this command can be run-length encoding or TIFF encoding. Note: For further information, see “Raster Compression Mode” on page 2-88 and “Group 3 and Group 4 Raster Compression” on page 2-93. ESC*b#W[data] # = Number of Data Bytes Transfer Raster Data by Row/Block Transfers RIG data. Note: After each command, the cursor position is moved to the beginning of the next raster row. ESC*rB End Raster Graphics (Version B) Signals end of raster graphics transfer. If a Raster Height is specified, the cursor is moved to the first raster row past the Raster Height. ESC*rC End Raster Graphics (Version C) Same as Version B, but: • Resets compression mode to uncoded. • Sets left graphics margin to 0. ESC*t#H Raster Width (Destination) Sets the width of the destination raster. Table 2-40: Raster Graphics (Continued) Command / Parameters Function / Result

Sets the height of the destination raster. ESC*g#W[data] # - 8 (K-only) or 26 (KCMY) Data Byte 0 - 0x02 (constant) Byte 1 - number of colors 0x01 - K only 0x04 - CMYK Byte 2,3 - X res for K plane 0x012C (300) or 0x0258 (600) Byte 4,5 - Y res for K plane 0x012C (300) or 0x0258 (600) Byte 6,7 - K plane intensity levels 0x02 (1 bit/plane) or 0x04 (2 bits/plane) Byte 8,9 - X res for C plane 0x012C (300) or 0x0258 (600) Byte 10,11 - Y res for C plane 0x012C (300) or 0x0258 (600) Byte 12,13 - C plane intensity levels 0x02 (1 bit/plane) or 0x04 (2 bits/plane) Byte 14,15 - X res for M plane 0x012C (300) or 0x0258 (600) Byte 16,17 - Y res for M plane 0x012C (300) or 0x0258 (600) Byte 18,19 - M plane intensity levels 0x02 (1 bit/plane) or 0x04 (2 bits/plane) Byte 20,21 - X res for Y plane 0x012C (300) or 0x0258 (600) Byte 22,23 - Y res for Y plane 0x012C (300) or 0x0258 (600) Byte 24,25 - Y plane intensity levels 0x02 (1 bit/plane) or 0x04 (2 bits/plane) Set Raster Configuration Sets the configuration of the destination raster. Table 2-40: Raster Graphics (Continued) Command / Parameters Function / Result

Command / Parameters Function / Result ESC&b#M 0 Print in mixed render algorithm mode 1 Print using gray scale equivalent Monochrome Print Mode Changes each color value to its gray scale equivalent. ESC&p#C 0 Delete all palettes except those in stack (active palette is deleted) 1 Delete all palettes in stack (active palette not affected) 2 Delete palette specified by Palette Control ID 6 Copy active palette to ID specified by Palette Control ID Palette Control Provides palette management. ESC&p#I 0 to 32767 Palette ID number Palette Control ID Indicates the ID number used by the Palette Control command. ESC&p#S 0 to 32767 Palette ID number Select Palette Selects a new active palette by indicating the ID number. ESC*l#W[data] 0 Resets or initializes the color lookup tables for each primary color to the unity curve 770, Data Data for color lookup table Color Lookup Tables Enables the color lookup tables and specifies the table to use. ESC*m#W[data] 7 to 32767, Data Data size and data of byte-aligned binary data that specifies a matrix or matrices for the primary colors Download Dither Matrix Downloads a device dependent user-defined dither matrix. ESC*o#W[data] 1 to 32767, Data Specifies lightness, saturation, and image scaling Driver Configuration Command Indicates the lightness, saturation, and scaling algorithm to be applied to a job. ESC*p#P 0 Push (Save) Palette 1 Pop (Restore) Palette Push/Pop Palette Saves (push) the current palette and then restores (pop) it from the palette stack. ESC*r#U -4 4 planes, device KCMY palette -3 3 planes, device CMY palette 1 Single plane, K (black) palette 3 3 planes, device RGB palette Simple Color Creates a fixed-size palette. The color specification of the palette cannot be modified.

0.0 to 4.0 Gamma Number Gamma Correction Improves the perceptual correctness of color data sent from the monitor to any other non-linear device by adjusting the brightness and darkness. ESC*t#J Render Algorithm Selects the algorithm used for dithering images and fills. ESC*v#A -32767.0 to 32767.0 Color Component One Indicates the first primary color specified by the Assign Color Index command. ESC*v#B -32767.0 to 32767.0 Color Component Two Indicates the second primary color specified by the Assign Color Index command. ESC*v#C -32767.0 to 32767.0 Color Component Three Indicates the third primary color specified by the Assign Color Index command. ESC*v#I # = Palette Index 0 to 2n – 1 = Palette Index Assign Color Index Designates the three current color components to the specified palette index number. n represents the number of bits per index. ESC*v#S # = Palette Index 0 to 2n – 1 = Palette Index Foreground Color Sets the foreground color to the specified index in the current palette. n represents the current palette size. ESC*v#W[data] Configure Image Data Creates programmable palettes. ESC*i#W[data] Viewing Illuminant 8, Data Designates the relative white point used in determining a viewing illuminant condition. Table 2-41: Color Extensions (Continued) Command / Parameters Function / Result

Command / Parameters Function / Result ESC*s#T 0 Invalid location (Default) 1 Use currently selected location 2 All locations 3 Internal (resident) 4 Downloaded entity 5 Cartridge 7 User-installable flash 200 Disk Set Status Readback Location Type Sets the status location type to the specified value. The 5 value for Cartridge may be specified, but since your printer does not support font cards or cartridges, the command is ignored. The 7 value for User-installable flash is only valid when flash memory is installed. The 200 value is only valid when a hard disk is installed. ESC*s#U 0 All 1 If download, temporary; otherwise, highest priority 2 If download, permanent; otherwise, next higher priority Set Status Readback Location Unit Sets the status location unit to the specified value. The location unit is used along with the location type to identify a location for the Inquire Status Readback Entity command. Note: The unit value is interpreted differently, depending on the location type specified. ESC*s#I 0 Font 1 Macro 2 User-defined pattern 3 Symbol set (for unbound scalable fonts) 4 Font extended Inquire Status Readback Entity Returns the requested information set by Set Status Readback Location Type and Set Status Readback Location Unit. ESC*s1M Free Space Returns the total available memory and the largest available block of memory. ESC&r#F 0 Flush all complete pages 1 Flush all pages Flush All Pages Holds print jobs in the print buffer until the current job finishes printing. ESC*s#X -32767 to 32767 Default = 0 Echo Returns # back to host computer.

Command / Parameters Function / Result ESC*c#X # of Decipoints: 0 to 32767 (1 Decipoint = 1/720 inch) Picture Frame Horizontal Size (in Decipoints) Specifies the horizontal dimension of the picture frame used when printing a GL/2 plot. ESC*c#Y # of Decipoints: 0 to 32767 (1 Decipoint = 1/720 inch) Picture Frame Vertical Size (in Decipoints) Specifies the vertical dimension of the picture frame used when printing a GL/2 plot. ESC*c0T 0 Set Anchor Point to Cursor Position Set Picture Frame Anchor Point Sets the position of the picture frame anchor point to the cursor position. The picture frame anchor point defines the location of the upper left corner of the picture frame. ESC*c#K Size in inches: 0 to 32767 GL/2 Horizontal Plot Size Specifies the horizontal scaling factor used when importing an image into the picture frame. ESC*c#L Size in inches: 0 to 32767 GL/2 Vertical Plot Size Specifies the vertical scaling factor used when importing an image into the picture frame. ESC%#B 0 Use Previous GL/2 Pen Position 1 Use Current PCL Cursor Position Enter GL/2 Language Exits PCL emulation and uses GL/2 commands to print. ESC%#A 0 Use Previous PCL Cursor Position 1 Use Current GL/2 Pen Position Enter PCL Emulation Exits GL/2 mode and uses PCL emulation commands to print. Table 2-44: Miscellaneous Commands Command / Parameters Function / Result ESC&s#C 0 Enable 1 Disable (Default) End-Of-Line Text Wrap Enabling End-Of-Line Text Wrap moves portions of lines that extend into the unprintable area to the next line. Disabling drops the portion extending into the unprintable area. ESCY Display Functions On Prints all control codes and escape sequences rather than executing them. Notes: • To prevent characters from falling outside the right margin (and not printing), enable End-Of-Line Text Wrap (ESC&s0C). • To see the control characters and other blank codepoints in symbol set Roman8 (8U), set the symbol set to PC-8 (10U).

PCL emulation and cannot be used with software without a unique printer driver written explicitly for GL/2. The following tables list the GL/2 commands by group. To determine which GL/2 commands your printer supports, see “Table A-2: GL/2 Commands” on page A-6. ESCZ Display Functions Off Turns off Display Functions; resumes normal command processing. ESCz Print Test Page Causes a test page to print. ESC*o#M(b) -1 Ink Saver 0 Normal 1 Best Print Quality Selects the print quality setting for the page. ESC&l#M(b) 0 Plain Paper 1 Bond 2 Coated Paper 3 Glossy Paper 4 Transparency 101 Photo Paper 102 Card Stock 103 Labels 104 Envelope 105 Letterhead 106 Preprinted 107 Colored Paper 108 Iron On Paper Type Selects the paper type setting for the page. Table 2-45: Configuration Group Command / Parameter Command Name CO "text" Comment DF; Default Values IN (n); Initialize IP (XP1, YP1(, XP2, YP2)); Input P1 and P2 Table 2-44: Miscellaneous Commands (Continued) Command / Parameters Function / Result

Input Relative P1 and P2 IW (X1, Y1, X2, Y2); Input Window MC (mode(, opcode)); Logical Operation PP (mode); Pixel Placement RO (angle); Rotate Coordinate System SC (Xmin, Xmax, Ymin, Ymax(, type(, left, bottom))); Scale Table 2-46: Vector Group Command / Parameter Command Name AA Xcenter, Ycenter, sweep_angle(, chord_angle); Arc Absolute AR Xcenter, Ycenter, sweep_angle(, chord_angle); Arc Relative AT Xinter, Yinter, Xend, Yend(, chord_angle); Absolute Arc Three Point BR X1, Y1, X2, Y2, X3, Y3(,...); Bezier Relative BZ X1, Y1, X2, Y2, X3, Y3(,...); Bezier Absolute CI radius(, chord_angle); Circle PA (X, Y(,...)); Plot Absolute PD (X, Y(,...)); Pen Down PE (flag(value) | coordinates (...)); Polyline Encoded PR (X, Y(,...)); Plot Relative PU (X, Y(,...)); Pen Up RT Xincr inter, Yincr inter, Xincr end, Yincr end(, chord_angle); Arc Relative Three Point WU (type); Pen Width Units Table 2-47: Polygon Group Command / Parameter Command Name EA X, Y; Edge Rectangle Absolute EP; Edge Polygon ER X, Y; Edge Rectangle Relative EW radius, start_angle, sweep_angle(, chord_angle); Edge Wedge FP (0); Fill Polygon, Odd/Even FP 1; Fill Polygon, Non-Zero Winding PM (mode); Polygon Mode Table 2-45: Configuration Group (Continued) Command / Parameter Command Name

Fill Rectangle Absolute RR X, Y; Fill Rectangle Relative WG radius, start_angle, sweep_angle(, chord_angle); Fill Wedge Table 2-48: Character Group Command / Parameter Command Name AD (kind, value(,...)); Define Alternate Font CF (mode(, pen)); Character Fill CP (spaces, lines); Character Plot DI (run, rise); Absolute Direction DR (run, rise); Relative Direction DT (label_terminator(, mode)); Define Label Terminator DV (path(, line)); Define Variable Text Path ES (width(, height)); Extra Space FI font_ID; Primary Font FN font_ID; Secondary Font LB char...char label_terminator; Label LM (mode,[row number]) Label Mode LO (position); Label Origin LO 21; Uses PCL Label Origin SA; Select Alternate Font SB (mode); Scalable or Bitmapped Fonts SD (kind, value(,...)); Define Standard Font SI (width, height); Absolute Character Size SL (tangent); Character Slant SR (width, height); Relative Character Size SS; Select Standard Font TD (mode); Transparent Data Table 2-47: Polygon Group (Continued) Command / Parameter Command Name

Command / Parameter Command Name AC (X, Y); Anchor Corner CR (red black ref, red white ref, green black ref, green white ref, blue black ref, blue white ref); Color Range FT (fill_type(, option1(, option2)); Fill Type FT22, (PCL User-Defined Pattern ID); Fill Type FT 9, level; Fill Type LA (kind, value(,...));. Line Attributes LT (pattern_number(, pattern_length(, mode))); Line Type NP (number); Number of Pens PC (pen (, red, green, blue)); Pen Color PW (width(, pen)); Pen Width RF (index(, width, height(, pen, ...))); Define Raster Fill SM (character); Symbol Mode SP (pen); Select Pen SV (screen_type(, option1(, option2))); Screened Vectors SV (9, level,) Screened Vectors TM (width, height(, number...)); Threshold Matrix TR (mode); Transparency Mode UL (index(, gap,...gap)); User Defined Line WU (type); Pen Width Units

These commands utilize the raster area. Before sending data, set the presentation mode, the resolution, the compression mode, the raster height and width, and start raster graphics. These parameters are in effect until you overwrite them with a different command or there is a printer reset. To ensure that the printed image appears in the expected area, set width and height parameters. Raster Compression Mode The Raster Compression Mode command determines how raster data is coded. It affects the amount of code required to create an image, and the efficiency of image printing. Syntax: ESC*b#M Parameters: 0 Uncoded (default) 1 Run-Length Encoded 2 Tagged Image File Format (TIFF) Byte 3 Delta Row 5 Adaptive Compression 9 Replacement Delta Row 999 Zlib 1002 Group 4 1003 Group 3 one dimensional 1004 Group 3 two dimensional K=2 1005 Group 3 two dimensional K=4 1006 TIFF word (16 bit) 1007 TIFF double-word (32 bit) 1008 Adaptive Compression (includes TIFF word and TIFF double-word)