Intel SPSH4 Technical Product Specification

Revision 1.11 96 9.6.6 Taiwan This server complies with CNS13438 and complies with Taiwan BSMI Regulations. The product is marked with the following BSMI Certification number and EMC Warning. 3912I902 The English translation for the above warning is: This is a class A product. In a domestic environment this device may cause radio interference in which case the user may be required to take adequate measures. 9.7 Replacing The Back Up Battery The lithium battery on the server board powers the real time ...

Revision 1.11 Intel reference number 10736 75 7. System Boards This chapter describes the design and features of the SPSH4 system boards. 7.1 Power Distribution Board The SPSH4 server system power supplys plug into a power distribution board (PDB). The PDB provides power connectivity and server management features to the server system. The PDB is located in the base of the chassis. Right-angle connectors on the PDB allow the blind-mating of up to three power supply connectors. Two pop rivets and four 6-32 screws are used to secure this board t ...

Revision 1.11 Intel reference number 10736 15 4. Power supply Subsystem This section defines the features and functionality of the SSI compliant 600 watt power supply, a universal input switching power supply. The power supplies are located in the power supply bay mounted near the rear of the chassis. The system may be configured either with two 600 W power supplies in a non-redundant configuration, or three 600 W power supplies for a redundant power (2 + 1) configuration. Each power supply requires an individual power cord. When the system ...

SPSH4 Server System External Product Specification Revision 1.11 22 4.2.3 AC Electrical Specifications 4.2.3.1 AC / DC Supply Redundancy The power sub-system has three AC inlets, one for each power supply. Each power supply does not rely on other modules for any functionality except for load sharing. AC input to the power supply is fully isolated. Therefore, it is not subject to AC phase differential issues. All DC outputs have a device to isolate the power supply from the main system power during a power supply failure or during a hot swap operation. The SPSH4 server sy ...