Kinivo BTX270 Operation & User’s Manual

1 Troubleshooting 1. Unable to pair to smartphone or tablet Ensure that the speaker is in pairing mode (see Bluetooth Pairing section). If you are unable to get the speaker into pairing mode, see Alternate process under section Bluetooth Pairing . Now open the Bluetooth configuration on your smartphone or tablet and scan for Bluetooth devices. You should see the BTX270 speaker - proceed to pair and connect the speaker. 2. Speaker no longer connects to my device To ensure the BTX270 speaker is in working order, delete all existing pairings on all de ...

10 6. LED Indication Status LED Indicator Powered off Off Bluetooth pairing mode Blinking blue and red Powered on Blinking blue Low battery (not plugged in) Blinking red Battery charging Steady red ...

1 6. Error messages when connecting on Mac OS X Verify that the BTX270 speaker are powered on. If you are still unable to connect, restart the computer and remove the BTX270 from the Bluetooth device list. Try to pair the speaker again. If at any point you are unable to resolve your issue, you can contact Kinivo Support via email at [email protected] or on web at support.kinivo.com Frequently Asked Questions 1. What is the BTX270 speaker compatible with? In general, the BTX270 speaker will work with devices that support the A2DP (Advanced Audio Di ...

Kinivo Product Support Online : http://support.kinivo.com Email : [email protected] year limited hardware warranty 1 ...

1 7. Button Functions Function Operation Toggle unit on/off Toggle the power switch Bluetooth pairing mode When the speaker is on, press and hold multifunction button for 6 to 8 seconds Bluetooth pairing mode (if the speaker is already connected to another device) Ensure that the speaker is powered off. While holding the multi- function button, switch on the speaker hold the multifunction button for another 6 to 8 seconds. Voice command Voice dialing (Siri for supported iPhones) Push and hold the multifunction button for 3 seconds To use the voic ...

10 6. LED Indication Status LED Indicator Powered off Off Bluetooth pairing mode Blinking blue and red Powered on Blinking blue Low battery (not plugged in) Blinking red Battery charging Steady red ...

18 Warranty 1 Year Limited Hardware Warranty. Kinivo hereby warrants to the customer of record that this product is in good-working condition and free from defects in mate- rial or workmanship under normal use for a duration of 1 year after the date of purchase. The product has been tested to meet the highest quality standards in each testing category. In the unlikely event that the product proves to be defective, Kinivo will repair or replace the product free of charge. If replacement is required and if Kinivo then no longer carries the same produc ...

12 Refuse incoming call Push and hold the multifunction button for 3 seconds Switch call between phone and BTX270 Push and hold the multifunction button for 3 seconds Answer call, End call Press and release multifunction button Redial last number Press and release multifunction button twice (double click) Toggle microphone mute (during a call) Press and hold the volume button for 1 to 2 seconds Increase volume Press and release volume button Decrease volume Press and release volume button Play music Pause music Press multifunction button Nex ...