ALCHEMIST 8 INTEGRATED Instruction Manual
Text of the manual
The Product 8 Integrated Amplifier is a class A/B type device, and as such it will need to dissipate a little heat. It
should therefore be placed on a flat surface with free space all around. Under no circumstances must the unit become
covered as this may result in the unit overheating.
The Product 8 Integrated Amplifier comes with an IEC mains lead fitted w
Be sure that your amplifier is switched off when connecting or disconnecting any leads.
.
Product8 Integrated Amplifier
There are three outputs, TAPE and two PRE-OUT connections (one XLR and one RCA sockets).
The PRE-OUT facility has been provided so that you can follow a logical upgrade in the future, following such a path:
1 Product8 In
Output @1kHz into 8 ohms:
Input Sensitivity:
Frequency Response @ 3V:
Residual Noise (Max vol):
Total Harmonic Distortion:
Power Consumption (Nominal):
Power Consumption (Peak):
External Fuse Rating:
Dimensions ( W x H x D):
Weight (Packed):
100 Watts (Class A/B)
390mV
-3dB @ 50KHz
<2mV
<0.5% THD
100 Watts
370 Watts
8A@110-120V
4A@220-240V
470mm x 3
