HEED OBELISK Si Operation & User’s Manual
Text of the manual
Thank you for choosing our product!
In designing the Heed Obelisk Si, our objective was to produce an integrated amplifier that
conveys all the emotional content and immediacy of your recordings faithfully, allowing
the atmosphere, tension, and excitement of the original performance to shine through in
an organic, true-to-life fashion. We sincer
Instructions — All safety and operating instructions should be read and adhered to exactly as written here or as
depicted on the unit. Please retain for future reference.
Water and Moisture — The unit should not be used near water — that is, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or swimming pool, etc.
V
1 Volume Knob
3 Position and on/off indicator LEDs
2 Input Selector Switch
4 Infrared sensor
7 Auxiliary Power Supply connector
17 No. 4. Line level input right channel
8
Speaker right channel connector "+"
18 No. 3. Line level input left channel
5 Power on/off switch
15 No. 5. Line level input right channel
6 Mains connecto
We believe that a Heed Audio component should be, optimally, installed by an approved Heed dealer. Nevertheless, the
procedure is straight-forward enough that you may install your new Obelisk Si yourself by following the instructions contained
herein. Should any problems be experienced which are not covered here, contact your local dealer. If yo
The Obelisk is equipped with high quality loudspeaker connectors suitable for 4mm banana plugs, max. 4mm diameter
bare wire or spades.
Wenn connecting the loudspeaker cables ensure that the speakers are connected correctly
i.e. "+" (red) to "+" and "–" (black) to "–".
Your Obelisk Si has a pre-out (RCA) connection (12,13). Here you can connect an additio
