Hisense 32D20 Quick Setup Manual

Loose connections can result in image or color problems. Make sure that all connections are tight and secure. ACCESSORIES LIST 1 INSTALLING THE STAND 2 INSTALLING A WALL-MOUNT BRACKET 3 If the item is not specif ied in the accessories list, it should be provided by customer. User Manual Quick Setup Guide Important Information Remote Control Battery (AAA) × 2 Screw (ST4×12F)×4 NOTE Product image is only for reference, actual product may vary in appearance. CAUTION Carefully place your TV facedown on a soft, cushioned surface to prevent damage to the TV or scratching to the screen. 1. Attach the stand to the TV set as shown in the picture. 2. Use the screws (ST4X12F)X4 to fix the stand tightly. 1. If you want to attach the TV to a wall-mount bracket (not provided), you should first remove the stand if it is pre-attached. Make sure the TV is laid face-down on a clean, safe, and cushioned surface. 2. Attach purchased bracket on the TV with the 4 screws (Not provided) . 3. Follow instructions provided with the wall bracket. If you are not sure of your ability to complete the installation, contact a professional installer or service technician for assistance. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or incorrect assembly. Be sure to use the provider spacers between the TV and the bracket when attaching the mount. To prevent internal damage to the TV and ensure the TV is mounted securely, be sure to use fixing screws (Not provided) which are 7 mm to 9 mm in length when measured from the attaching surface of the mounting hook. Screws M4 7~9 mm Wall-mount Bracket Screw the TV’s rear cover WARNING Wall-mount hole pattern VESA (mm) 200 × 100 Wall-mount screw size (mm) M4 Screw Bracket USB Connect the USB disk with standard USB 2.0 port to this jack. Data Input from USB Memory Stick only. Do not connect any device to this jack such as digital camera, keyboard, mouse, etc. VGA & PC / DVI AUDIO IN Connect to a personal computer’s video and audio output connector. Connect to a broadcast antenna or cable TV. ANT/CABLE Connect a digital audio device to this jack. DIGITAL AUDIO OUT QUICK SETUP GUIDE TV Bottom View TV Side View ANT/CABLE IN Connect an antenna or cable TV to this jack. HDMI/DVI HDMI (High-Definition Multimedia Interface)provides an uncompressed, all digital audio/video interface between this TV and any HDMI-device, such as a set-top box,Blu-ray disc player,or A/V receiver. Connect to a DVD player, Digital Set-Top-Box, or other A/V devices with component (YPBPR) video and audio output jacks. Component audio Jack share with AV IN audio Jack.Support: 480i\480p\576i\576p\1080i\1080p. AV IN Connect to the composite video and audio (L/R) output jacks on external video devices. VGA PC/DVI AUDIO IN Connect to a PC or other devices with a VGA interface. Item Description HEADPHONE Connect headphone or analog sound system using RCA Y-cable(1/8" -stereo mini to L/R phono-not provided). DIGITAL AUDIO OUT Connect to an external digital audio device. USB Photo, Music, Movie play and software update. COMPONENT IN NOTE Some external devices impossible insert to this set for individual difference. Please replace with appropriate external signal cable or increase the adapter to match with the port in such case. VHF/UHF Antenna Cable ANT OUT ANT/CABLE OR OR r. PC VGA PC/DVI AUDIO IN USB DC 5V 0.3A(MAX) Speaker DIGITAL AUDIO OUT

5 TROUBLE SHOOTING 7 Turning the TV On for the First Time 6 NOTE Features, appearance and specifications are subject to change without notice. HDMI IN Available devices: DVD, Blu-ray player, Audio Video Receiver, cable box, satellite receiver, game station. BEST COMPONENT IN BETTER Available devices: DVD, Blu-ray player, Audio Video Receiver, cable box, satellite receiver, game station. AV IN GOOD Connect the composite video and audio output jacks of your legacy A/V equipment, such as a VCR. CHANGE THE BATTERIES 1. Push the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment cover. If you would like to program your other household remote controls to your new Hisense television, please consult the User’s Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers’ User’s Manuals should include instructions on how to program their remote to your television. 1 2 3 Press [ ▲ / ▼ ] to select your Tuner Mode: Antenna or Cable, press [ENTER] button to confirm. 1. Press [▲/▼] to select your Picture Mode: Home Mode or Retail Mode, press [ENTER] button to confirm. 2. For energy saving, we kindly suggest you select the Home Mode. Connect headphone or analog sound system using RCA Y-cable (1/8"-stereo mini to L/R phono-not provided). HEADPHONE Power on/off Direct channel selection Mute button Select input source Go to the previous channel Increase volume Decrease volume Next channel Previous channel Adjust CC mode Display the information banner ▲/ ▲ / ▲ / ▲ Move Up/Down/Left/Right or adjust settings Menu button Close the menu Auto ajust button Zoom button Sleep timer button Make the screen stop Favorite program controlling button & Media player button Media player button Select picture mode Select sound mode Channel list Select TV AV VGA USB source Open the DTV program guide (if available) Audio select button Mono/Stereo/SAP operation Dash button Select a digital sub-channel INPUT LAST SAP DISPLAY MTS CCD CH. OK VOL EXIT MENU AUTO TV AV VGA MEDIA PICTURE FAVLIST ADD/ERASE FAV+ ASPECT STILL SLEEP MUTE 1 2 3 4 5 6 7 8 9 - - FAV- - + + 0 SOUND CHLIST GUIDE Program Your Universal Cable or Satellite Remote Control to Operate Your New Hisense Television! Gently lift up Insert the batteries Gently push down Setup Wizard Go to next step Please select your preferred mode Select Move Exit Setup Wizard Go to next step Select Move Exit Select the antenna type then auto scan No sound or picture. Check if the power cord is in the AC outlet and if it has electricity. Check if you have pressed [POWER] button on the TV or [POWER] button on the remote control. Check to see if LED light is either red or blue. If illuminated, power to TV is OK. I have connected an external source to my TV and I get no picture and/or sound. Check for the correct output connection on the external source and for the correct input connection on the TV. Make sure you have made the correct selection for the input mode for the incoming signal. [CH V / V] don’t work when I set the Channel to Cable? They work with the Air setting? After switching to Cable, please auto program the channels. The TV will “remember” all the channels then the TV will allow you to surf the channels with [CH V /V] buttons. Remote control does not work. Confirm that TV still has power and is operational. Change the batteries in the remote control. Check if the batteries are correctly installed. Clean the front of the remote control (LED window). If using a universal remote, be sure to select the TV mode on the remote. If the remote still does not work: • Remove and reinstall the batteries correctly to reset the remote or install new batteries. • Press the Power button to turn on the TV. With a universal remote if you have reset or changed the batteries you will need to reprogram the remote for the other units. Check if there is obstruction between the remote control and the TV. TIP: If you have a digital camera / camera phone, you can aim the front of the remote at camera lenses (at this time, the camera should set on camera mode, not play mode). Observe the camera screen while pressing a button on the remote control; you should see flashing light on the screen. If there is no light observed, the remote control is not working. You need to repair or replace the remote control. Picture is normal, but no sound. Check the volume settings. Check if Mute mode is set “on”. Sound but no picture or black and white picture. If black and white picture first unplug TV from AC outlet and replug after 60 seconds. Check Color Setting if picture is black and white. Sound and picture distorted or appear wavy. An electrical appliance may be affecting TV set. Turn off any appliances, if interference goes away, move appliance farther away from TV. Insert the power plug of the TV set into another power outlet. Sound and picture is blurry or cuts out momentarily. If using an external antenna, check the direction, position and connection of the antenna. Adjust the direction of your antenna or reset or fine tune the channel. SYMPTOMS POSSIBLE SOLUTIONS 1. Press [◄ / ►] to select the language to be used for menus and message. 2. Press [▼ / ▲] to select go to next step and press [OK /►] button to go. 1. Press [▼ / ▲] to select the time zone, daylight saving time and time format you want to. 2. Press [◄ / ►] to adjust. 3. Press [▼ / ▲] to select go to next step and press [OK /►] button to go. CY-M131006 HDMI VIDEO AV IN L R L B PR R COMPONENT IN /AUDIO OUT Speaker OR