Gearmore RC30-60 Operation, Service & Parts Manual

workmanship for a period of twelve (12) months from date of purchase to the original purchaser. This warranty shall not apply to implements or parts that have been subject to misuse, negli- gence, accident, or that have been altered in any way. Our obligation shall be limited to repairing or replacement of any part, provided that such part is returned within thirty (30) days from date of failure to Gearmore through the dealer from whom the purchase was made, transportation charges prepai ...

partially cut grass Mower not level, side to side Blade dull or bent. Blades unable to cut that part of grass pressed by path of tractor tires. Possible build up of material under mower. Level 3-pt. hitch linkage on tractor. Sharpen or replace blades. Slow ground speed of tractor but keep engine running at full PTO rpm. Cutting lower will help. Clean rotary mower. Blade cuts grass lower in center of swath than at the edge. Height of rotary mower lower at rear or at front. Adjust rotary mower height a ...

2 1 300200 Seal, Output Shaft 5 1 300136 Breather Fill Plug 6 1 300202 Oil Level 1/2" Plug ...

1 1/2" - 9" 1 1/2" - 9" Cutting Capacity: Up to 2" Diameter Up to 2" Diameter Up to 2" Diameter Hitch: Cat. I (Clevis Style) Cat. I (Clevis Style) Cat. I (Clevis Style) Machine Weight: 905 lbs. 1040 lbs. 1240 lbs. Gearbox Rating: 85 HP 85 HP 85 HP Blade Size: 1/2" x 4" 1/2" x 4" 1/2" x 4" Blade Tip Speed: 12,645 fpm 14,955 fpm 17,448 fpm Deck Thickness: 10 Gauge 10 Gauge 10 Gauge Side Skirt Thickness: 1/4" 1/4" 1/4" Side Skirt Height: 7 3/4" 7 3/4" 7 3/4" Type Tailwheel: Laminate ...

PART NUMBERS REF# QTY. RC30-60 RC30-72 RC30-84 DESCRIPTION 1 1 300191 300192 300193 Front Chain Guard Frame 2 1 3300194 300194 300194 Rear Chain Guard Frame 3 1 300168 300169 300195 Front Rod 4 1 300170 300170 300170 Rear Rod 5 1 100144 100144 100144 Retaining Bolt 3/8" x 1 1/2", Grade 5 6 1 100137 100137 100137 Retaining Lock Nut 3/8" 7 1 300196 300197 300198 Front Chain Guard Kit 8 1 300199 300199 300199 Rear Chain Guard Kit 9 7 100141 100141 100141 Bolt 5/16" x 3", Grade 5 10 14 100142 100142 100142 Flat Washer 5/16" 11 7 100134 100134 100134 Lock Washer ...

It is not necessary to remove the complete blade holder assembly to replace the blades. Blade bolts are accessible through a hole in the top of the mower deck. Always re- place both blades on a blade holder using two blades having the same weight. Use only OEM replacement blades. (See Figure 4-3) A. Raise rotary mower and securely block in position B. Remove nuts from blade bolts through the access hole in the mower deck (Figure 4-3). The RC30 requires a 1 5/16" socket. C. Inspect blade bolt shoulder for wear. Replace if necessary. D. Assemble ne ...