Sima SUR-20 Function Manual
Text of the manual
The Learning function
Overview: In this chapter you will learn how to teach
the SUR-20 codes used by your other remote controls.
The SUR-20 has the ability to learn how to operate any
infra-red controlled device.
Before you use the learning function
Before you start using the SUR-20’s learning function,
please hee
Chapter 4 —The Learning Function
13
Using the learning function
To teach the codes from your remote, set both remotes on a
flat surface facing each other. Be sure to point your device’s
remote control at the SUR-20’s learning eye, which is located
at the bottom of the unit. Do not use the other eye located at
the top of the SUR-20. You do not have to t
The SUR-20 User’s Manual
14
. Follow these instructions:
Press the LEARN button
for three seconds.
1
1
You will hear a beep and
then see the password
screen to the right.
Note: This screen
prevents you from
accidentally modifying the
SUR-20.
Press each number
button until it
disappears.
The touch screen appears
again, with the LEARN
icon appearing above t
Chapter 4 —The Learning Function
15
Select the device you
want to operate.
Press that device
screen button.
TIP: You can exit this
operation by pressing the
LEARN key at any time.
Line up your remote
control and the SUR-20
learning eye, according to
the diagram at right.
The SUR-20 is now ready
to learn your remote
controls buttons. The
power button is the
The SUR-20 User’s Manual
16
You can change the order of
assigning buttons by
pressing any button on the
SUR-20’s LCD touch screen
display panel…
… and then pressing the
corresponding button on
your device’s remote
control.
1
To customize the SUR-20
device screen buttons to
match your remote control’s,
(see Changing the LCD
Layout in Chpt. 3).
