Garmin 2730 Owner's Manual

Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K. Tel. 44/0870.8501241 Fax 44/0870.8501251 Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Tel. 886/2.2642.9199 Fax 886/2.2642.9099 All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. Garmin®, StreetPilot®, and MapSource® are registered trademarks and City Navigator™ is a trademark of Garmin Ltd. or its subsidiaries and may not be used without the express permission of Garmin. Audible.com® and AudibleReady® are registered trademarks of Audible, Inc. © Audible, Inc. 1997–2005 XM Radio and XM NavTraffic are trademarks of XM Satellite Radio Inc. April 2006 Part Number 190-00476-00 Rev. C Printed in Taiwan

i PREFACE Quick Links PREFACE Contact Garmin If you encounter any difficulty while using your Garmin® StreetPilot® 2730, or if you have any questions, in the U.S.A. contact Garmin Product Support by phone at 913/397.8200 or 800/800.1020, Monday–Friday, 8 AM–5 PM Central Time. You can also visit the Garmin Web site at www.garmin.com/support. In Europe, contact Garmin (Europe) Ltd. at 44/0870.8501241. Serial Number Record the serial number (8-digit number located on the back of the unit, under the auto mount cradle) in case your StreetPilot 2730 needs service or you would like to buy additional maps. Serial Number: ___ ___ ___ ___ ___ ___ ___ ___ Tell us how you like this manual! Fill out the Product Documentation Survey. Go to www.garmin.com /contactUs/ and click Product Documentation Survey. • Finding an address: page 3 • Viewing the map page: page 12 • Listening to MP3 files: page 25 • Listening to an audible book: page 27 • Turning off the GPS to use indoors: page 14 • Transferring files: pages 21–24, page 51 • Adjusting the volume: page 36 • Adjusting the brightness: page 42 • Cleaning and storing your unit: page vi

PREFACE TABLE OF CONTENTS Preface .........................................i Contact Garmin .....................................i Serial Number .......................................i Quick Links ...........................................i Caring for Your StreetPilot 2730 .........vi Find It and Go! ............................1 Finding a Restaurant ........................... 1 Following Your Route .......................... 2 Where To? ...................................3 Finding an Address ............................. 3 Using the Where To? Menu ................. 4 Finding a Place Using the Map ........... 5 Understanding the Information Page .. 6 Finding Recently Found Places ......... 6 Finding Places in a Different Area ....... 7 Narrowing Your Search ....................... 7 My Locations ...............................8 Saving Places You Find ...................... 8 Saving Your Current Location ............. 8 Setting a Home Location ..................... 9 Finding Saved Places ......................... 9 Editing Saved Places ........................ 10 Deleting a Saved Place ......................11 Viewing the Map and Using the Tools ........................................12 Viewing the Map Page ...................... 12 Trip Computer ................................... 13 Turn List ............................................ 13 GPS Info Page .................................. 14 Weather, Stocks, and Traffic ............. 14 Creating and Editing Routes ...15 Creating a New Saved Route ........... 15 Editing a Saved Route ...................... 16 Adding Midpoints (Stops) to Your Route .............................................. 17 Saving the Active Route .................... 18 Navigating a Saved Route ................ 18 Recalculating the Route .................... 18 Deleting All Saved Routes ................ 18 Stopping Your Route ......................... 18 Adding a Detour to a Route .............. 18 Adding Avoidances ............................ 19 Using The Logs .........................20 Adjusting the Track Log .................... 20 Using the Mileage Logs .................... 20 Loading Files on Your 2730 ....21 Step 1: Load the USB Drivers ........... 21 Step 2: Connect AC Power ............... 21 Step 3: Connect the USB Cable ....... 21 Step 4: Select USB Mass Storage .... 22 Step 5: Transfer Files ........................ 22 Step 6: Eject and Unplug the USB Cable .............................................. 23 Information about the Drive ............... 24 Listening to Music and Audible Books ......................................25 Playing MP3 Files ............................. 25 Listening to Audible Books ................ 27

iii PREFACE Listening to Audio Over the Vehicle’s Speakers .................32 FM Transmitter Tips .......................... 33 Traffic Information ....................34 Connecting the GXM 30 to Your StreetPilot ....................................... 34 Viewing Traffic Events ....................... 34 Changing the Traffic Settings ............ 35 Adding an XM Traffic Subscription .... 35 Customizing the StreetPilot 2730 ........................................36 Adjusting the Volume ........................ 36 Customizing the General Settings .... 36 Changing the Map Settings ............... 39 Changing the Navigation Settings ..... 40 Adjusting the Traffic Settings ............ 41 Changing the Screen Settings .......... 41 Viewing Unit Information (About) ...... 41 Restoring the Settings ....................... 42 Appendix ...................................43 Using the Remote Control ................. 43 Looking at the StreetPilot 2730 ......... 44 Using the 2730 Unit Keys ................. 45 Installing the 2730 in Your Vehicle .... 45 Custom POIs (Points of Interest) ...... 47 Customizing the Map Data Fields ..... 48 Technical Specifications .................... 49 Changing the Fuse ............................ 49 Updating the Software and Map Data ................................................ 50 Using a Remote GPS Antenna ......... 50 FCC Compliance ............................... 51 Software License Agreement ............ 51 Declaration of Conformity ................. 51 USB Interface Troubleshooting ......... 52 2730 Troubleshooting ....................... 54 Limited Warranty ............................... 55 Index ..........................................56

PREFACE Warning This manual uses the term Warning to indicate a potentially hazardous situation, which, if not avoided, could result in death or serious injury. Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury. When installing the unit in a vehicle, place the unit securely so that it does not interfere with vehicle operating controls or obstruct the driver’s view of the road (see diagram). Do not mount where driver’s field of vision is blocked. Do not place unsecured on the vehicle dash. Do not mount in front of an airbag field of deployment. When navigating, carefully compare information displayed on the unit to all available navigation sources, including information from street signs, visual sightings, and maps. For safety, always resolve any discrepancies or questions before continuing navigation. Always operate the vehicle in a safe manner. Do not become distracted by the unit while driving, and always be fully aware of all driving conditions. Minimize the amount of time spent viewing the screen of the unit while driving and use voice prompts when possible. Do not enter destinations, change settings, or access any functions requiring prolonged use of the unit’s controls while driving. Pull over in a safe and legal manner before attempting such operations. WARNING: This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is being provided in accordance with California’s Proposition 65. If you have any questions or would like additional information, refer to our Web site at www.garmin.com/prop65.

v PREFACE Failure to avoid the following potentially hazardous situations may result in injury or property damage. The unit is designed to provide you with route suggestions. It does not reflect road closures or road conditions, traffic congestion, weather conditions, or other factors that may affect safety or timing while driving. Use the unit only as a navigational aid. Do not attempt to use the unit for any purpose requiring precise measurement of direction, distance, location, or topography. This product should not be used to determine ground proximity for aircraft navigation. The Global Positioning System (GPS) is operated by the United States government, which is solely responsible for its accuracy and maintenance. The government’s system is subject to changes which could affect the accuracy and performance of all GPS equipment, including the unit. Although the unit is a precision navigation device, any navigation device can be misused or misinterpreted and, therefore, become unsafe. The unit has no user-serviceable parts. If you ever have a problem with your unit, take it to an authorized Garmin dealer for repairs. The unit is fastened shut with screws. Any attempt to open the case to change or modify the unit in any way voids your warranty and may result in permanent damage to the equipment. Caution This manual uses the term Caution to indicate a potentially hazardous situation, which, if not avoided, may result in minor injury or property damage. It may also be used without the symbol to alert you to avoid unsafe practices. Important Information MAP DATA INFORMATION: One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify in product literature and copyright messages displayed to the consumer. Virtually all data sources contain inaccurate or incomplete data to some extent. In some countries, complete and accurate map information is either not available or is prohibitively expensive. NOTICE: This Category II radio communication device complies with Industry Canada Standard RSS-310.

PREFACE Caring for Your StreetPilot 2730 The StreetPilot 2730 is constructed of high quality materials and does not require user maintenance other than cleaning. Cleaning the Unit Clean the unit’s outer casing using a cloth dampened with a mild detergent solution and then wipe dry. Avoid chemical cleaners and solvents that can damage plastic components. Caring for the Touch Screen The touch screen is intended to be operated with a finger. Never use a hard or sharp object to operate the touch screen or damage may result. Though a PDA stylus can also be used to operate the touch screen, never attempt this while operating a vehicle. Clean the touch screen using a soft, clean, lint-free cloth. Use water, isopropyl alcohol, or eyeglass cleaner if needed. Apply the liquid to the cloth and then gently wipe the touch screen. Protecting Your StreetPilot 2730 • Do not store the unit where prolonged exposure to extreme temperatures can occur (such as in the trunk of a car), as permanent damage may result. • To avoid theft, do not leave your StreetPilot in plain sight when you leave your vehicle. • Do not store alkaline batteries in the remote control for extended periods of time. To reduce the chance for battery leakage in the battery compartment, remove the batteries when storing the remote control for more than six months.

1 FIND IT AND GO! FIND IT AND GO! Use the Garmin StreetPilot 2730 to find your destination and go to it. Finding a Restaurant ➋ Touch Food, Hotel…. ➌ Touch Food & Drink. ➊ Touch Where To? ➍ Touch a food category. ➏ Touch Go To. ➎ Touch a place.

FIND IT AND GO! Following Your Route Follow the route to your destination using the map. As you travel, your StreetPilot guides you to your destination with voice prompts, arrows, and directions along the top of the map. If you depart from the original route, your StreetPilot recalculates the route and provides new route instructions. Your route is marked with a magenta line. Follow the arrows. A checkered flag marks your destination. For more information about using the map, see pages 12–14. Taking a Better Route The map page displays a when the StreetPilot has found a better route than the one you are currently taking. Touch the to take the better route. For more information about Continuous Auto Routing, see page 41.

3 WHERE TO? WHERE TO? Finding an Address ➊ From the Menu page, touch Where To? Touch Address. ➍ Enter the street name and touch Done. ➌ Enter the address number and touch Done. ➎ Select the street and then select the city. ➏ Select the address, if necessary. Touch Go To. ➋ Touch a state. Touch Search All Cities or select a city.

WHERE TO? Using the Where To? Menu The Where To? menu (also called the Find menu), provides several different categories you can use to search for locations. From the Menu page, touch Where To? Where To? menu Address—enter the house number and street name to find a specific address. See page 3. Food, Hotel…—search for places such as schools, shopping centers, and hostpitals. Use the and to view all of the categories. Streets & Cities—find a city, street, intersection, or exit. Food, Hotel… menu Browse Map—use the map to find the location you are looking for. See page 5. My Locations—save your favorite locations in My Locations. To find the saved places, search in my Locations. See page 8. Recent Finds—find places you have recently found.

5 WHERE TO? Finding a Place Using the Map From the Menu page, touch View Map. You can also touch Where to? > Browse Map. Touch and drag anywhere on the map to browse the map (view different parts of the map). ➋ Touch Go To or Advanced. ➊ Touch any object on the map. Touch Review. Tips for Browsing the Map • Touch the map and drag to view different parts of the map. • Use the and icons to zoom in and out. • Touch any object on the map. An arrow appears pointing at the object you selected. • Touch Review to open the location’s information page; for more information, see page 6. • Touch Save As Favorite to save the location selected by the pointer to your Favorites. • Touch Back to return to the previous screen.

WHERE TO? Understanding the Information Page When you find a location, select it in the search results list to open the item’s information page. Information Page Touch Go To to create and follow a route to this location. Touch Advanced to view other options for this location: • Insert in Current Route—add this point as the next stop in your route. • Add As Favorite—add this location to your Favorites. For more information, see page 8. • Find Near Point—find a location near this point. • Browse Map—view this location on the map. Finding Recently Found Places Your StreetPilot stores the last 50 places you have found in Recent Finds. ➋ Select an item from the search results list. ➊ Touch Where To? > Recent Finds. Touch Category to display recent finds of a certain category, such as Food, Hotel….

7 WHERE TO? Finding Places in a Different Area You can search for locations in a different area, such as a different city or near your destination. ➊ From the search results list, touch Near…. ➋ Select one of the search options. The locations near the option you selected appear. Narrowing Your Search To narrow your search, you can spell part of the name of the location you are searching for. ➋ Enter part of the name and touch Done. ➊ From the search results list, touch Spell. Locations containing the letters you entered appear.

MY LOCATIONS Saving Places You Find After you have found a place you want to save, select it on the results list. ➊ Touch Advanced. ➋ Touch Add As Favorite. Saving Your Current Location From the Menu page, touch View Map. ➊ Touch anywhere on the map. ➋ Touch Save As Favorite. MY LOCATIONS

9 MY LOCATIONS Setting a Home Location You can set a Home Location for the place you return to most often. From the Menu page, touch Where To? ➌ Touch Save Home. ➋ Select an option. ➊ Touch Go Home. After you set your Home Location, open the Find menu and touch Go Home. Finding Saved Places From the Menu page, touch Where To? ➊ Touch My Locations. ➋ Touch Favorites. ➌ Touch a saved place.

MY LOCATIONS Editing Saved Places From the Menu page, touch Tools > My Data > Favorites. ➌ Touch Edit. ➊ Touch Edit/Review Favorites. ➋ Touch an item to edit. ➍ Touch an item to edit it. Name—enter a new name for the location using the on-screen keyboard. Location—edit the location of the place; you can use the map or enter new coordinates using the keyboard. Elevation—enter the elevation of the saved place. Category—assign this place to a category; touch to view the categories. Symbol—select a symbol to appear on the map for this location.

11 MY LOCATIONS Deleting a Saved Place From the Menu page, touch Tools > My Data > Favorites. ➍ Touch Delete. ➊ Touch Delete Favorites. ➋ Touch By Selection. ➌ Touch a saved location. By Selection—touch each location and delete them each individually. By Category—select one category to delete all of the locations assigned to that category. Delete All—removes all saved places from your Favorites.

VIEWING THE MAP AND USING THE TOOLS VIEWING THE MAP AND USING THE TOOLS Viewing the Map Page From the Menu page, touch View Map to open the map. Touch an area of the map to see additional information, as shown below. The position icon shows your current location. Map Page while Navigating a Route Touch the Speed or Arrival data field to open the Trip Computer. See page 13. While navigating a route, touch the green text bar to open the Turn List. See page 13. Touch to zoom out. Touch to zoom in. Touch the map to view and browse a 2-D map.

13 VIEWING THE MAP AND USING THE TOOLS Trip Computer The Trip Computer indicates your current speed and provides helpful statistics about your trip. To view the Trip Computer, select Speed or Arrival on the map. Or, from the Menu page, touch Tools > Navigation > Trip Computer. Total distance traveled (odometer) Current direction of travel Current speed Distance to your final destination Touch Reset Trip to reset all information on the Trip Computer. To reset the Maximum Speed, touch Reset Max. Turn List The Turn List displays a list of turn-by-turn instructions for your entire route as well as arrival information. While navigating a route, touch the green text bar on the map page to open the Turn List. Or, from the Menu page, touch Tools > Navigation > Turn List. Direction of this turn Distance to this turn Turn details Touch View All to see all the turns in the route. Touch and to scroll through the list. Touch a turn to see the turn on a map (the Next Turn page). Also, press Speak on the remote control to open the Next Turn page. Touch and to scroll through all the turns in the route. Touch and to zoom in and out of the turn on the map.

VIEWING THE MAP AND USING THE TOOLS GPS Info Page From the map or Menu page, touch the signal strength bars in the upper left corner to view the GPS Info page. Or, from the Menu page, touch Tools > Navigation > GPS Info. Sky view Satellite signal strength bars The sky view shows the satellites you are receiving. The satellite signal strength bars indicate the strength of each satellite you are receiving. A solid bar indicates the GPS satellite is ready for use. GPS Settings From the Menu page, touch Settings > General > GPS. You can also access the GPS Settings by touching the GPS Settings button on the GPS Info page. Use Indoors—touch Yes to turn the GPS receiver off and use the unit indoors. Set Position—set your position, if Use Indoors is enabled. Select your location on the map and touch OK. WAAS/EGNOS—disable and enable WAAS/EGNOS. WAAS and EGNOS are systems of satellites and ground stations that provide GPS signal corrections, giving you even better position accuracy. To learn about WAAS and EGNOS, visit www.garmin.com/aboutGPS/waas.html. Weather, Stocks, and Traffic You need an XM Smart Antenna and a subscription for services to use weather, stocks, traffic, and XM Radio. Refer to the GXM 30 XM Smart Antenna Owner’s Manual. See pages 34–35 of this manual for information about traffic.

15 CREATING AND EDITING ROUTES CREATING AND EDITING ROUTES Creating a New Saved Route From the Menu page, touch Tools > My Data > Routes. ➊ Touch Create New Saved Route. ➋ Touch a method and touch Next. Select the start point. ➌ Touch a method and touch Next. Select the end point. ➏ Touch Finish. ➎ Select your preference and touch Next. ➍ To add a stop, touch Yes, then touch Next. Select the point.

CREATING AND EDITING ROUTES Editing a Saved Route From the Menu page, touch Tools > My Data > Routes. Rename—enter a new name for the route using the on-screen keyboard. Edit/Review Points—add, arrange, remove, re-order, and review points in the route. For more info, see page 17. Change Preference—change calculation preference to Faster Time, Shorter Distance, or Off Road. Delete Route—delete this route. ➋ Touch the route to edit. ➊ Touch Edit/Review Routes. ➍ Touch the item to edit. ➌ Touch Edit.

17 CREATING AND EDITING ROUTES Adding Midpoints (Stops) to Your Route You can add midpoints (also called via points or stops) to your route as you create it, as described on page 15. You can also add points to your route when you edit the route, as described below. Follow the steps on the previous page to begin editing the route. Auto Arrange—arranges the points to provide the shortest route. Remove—touch the point you want to remove and then touch Remove. Re-Order—touch the point to move and touch Move Up or Move Down. Touch Done when finished. ➊ Touch Edit/Review Points. ➋ Touch Add. ➌ Touch where you to want to add the point. ➍ Touch a method and then select the point. ➎ Add points as necessary. Touch Done when finished.

CREATING AND EDITING ROUTES Saving the Active Route From the Menu page, touch Tools > My Data > Routes > Save Active Route. Navigating a Saved Route From the Menu page, touch Tools > My Data > Routes > Navigate Saved Route. Touch the route you want to navigate. Recalculating the Route From the Menu page, touch Tools > My Data > Routes > Recalculate Route. Deleting All Saved Routes From the Menu page, touch Tools > My Data > Routes > > Delete All Saved Routes. Stopping Your Route From the Menu page, touch Stop. Adding a Detour to a Route If you need to take a detour from your current route, open the Menu page and touch Detour. 1/2 mile, 2 miles, or 5 miles—select the distance of the detour. For example if a road sign indicates that the street is closed for the next 2 miles, touch 2 miles in the list. Your StreetPilot recalculates your route for the next two miles. Detour by Road(s) In Route—select roads in your route to avoid. For example, if the highway ramp is closed, select the ramp in the list of roads. Your StreetPilot recalculates your route to avoid that ramp. Detour by Traffic Event on Route—if you are using an FM Traffic Receiver or XM NavTraffic, you can detour around traffic events. Remove All Detours—touch to remove any detours you have entered for the route.

19 CREATING AND EDITING ROUTES Adding Avoidances From the Menu page, touch Settings > Navigation > > Avoidance Setup. Select the road type to avoid. Touch to view more road types to avoid. Creating Custom Avoids You can enter specific areas and roads to avoid in your routes. From the Avoidance Setup menu, touch two times and then touch Custom Avoids. ➌ Touch the second corner and touch Next. ➍ Touch Finish. ➋ Touch the first corner and touch Next. ➊ Touch Add New Avoid Area or Add New Avoid Road.

USING THE LOGS Adjusting the Track Log As you travel, the StreetPilot creates a bread crumb trail (track log) of your movement. From the Menu page, touch Tools > My Data > Track Log. Recording—turn off and on the track log recorder. Percentage Full—displays the current percentage capacity of the track log. To clear the track log, touch Percentage Full > Yes > OK. Displaying the Track Log From the Menu page, touch Settings > Map > Zoom Level Detail > Track Log. Select a zoom setting at which the track log is shown. Touch OK. Your track log now appears as a fine dotted line on the map. Using the Mileage Logs You can keep four different mileage logs of your travels. From the Menu page, touch Tools > My Data > Mileage Log. Touch a log to edit it. Name—enter a new name. Distance—reset the mileage log. Active—make this log active or inactive. USING THE LOGS

21 LOADING FILES ON YOUR 2730 Your 2730 can store files, such as MP3 music files and audible books. Using the USB Mass Storage mode, copy and paste files to the 2730 internal memory. Step 1: Load the USB Drivers Before connecting the USB cable to your computer, place the enclosed USB Driver CD-ROM into your computer’s CD-ROM drive. If the CD-ROM does not start automatically, click Start and then Run…. Type the letter of your CD-ROM drive followed by “setup” (example: “D:\setup”). Then press Enter. Follow the on-screen instructions. Step 2: Connect AC Power Connect the enclosed AC Power cable to the Power connector on the back of the StreetPilot. Connect the end to an available electrical outlet. Step 3: Connect the USB Cable Use the USB cable provided to connect the 2730 to your computer. Also use the USB cable when updating the StreetPilot software or loading additional maps. To connect your StreetPilot to your computer: 1. Plug the small end of the USB cable into the connector located on the back of your StreetPilot. 2. Connect the larger end of the USB cable to an available USB port on your computer. LOADING FILES ON YOUR 2730

LOADING FILES ON YOUR 2730 Step 4: Select USB Mass Storage After connecting the USB cable to the StreetPilot and your computer, flip the Power switch down to turn on the StreetPilot. The following screen appears: To transfer files to your StreetPilot, touch USB Mass Storage. If you would like to use MapSource or update your software, touch Garmin Mode. Step 5: Transfer Files After you connect your StreetPilot to your computer and select USB Mass Storage, you are ready to transfer files. 1. Double-click the My Computer icon on your computer’s desktop. 2. Browse your computer for the file you want to copy. 3. Highlight the file, right-click, and select Copy. 4. Open the “GARMIN” drive (see page 24). 5. Select Edit > Paste. The file then appears in the list of files on the “GARMIN” drive. Where Do I Paste the Files? For most files, like your MP3 files, you can paste them anywhere in the “GARMIN” drive. When you transfer Audible Books, AudibleManager places the books in an Audible folder. The POI Loader places custom POIs in the POI folder.

23 LOADING FILES ON YOUR 2730 Deleting Files from Your StreetPilot You can delete files from your StreetPilot just as you would delete files from your computer. With the StreetPilot connected to your computer and in USB Mass Storage mode, open My Computer. Open your “GARMIN” drive. Highlight the file that you want to delete from your StreetPilot and press the Delete key on your computer’s keyboard. CAUTION: Do not delete any files if you are not sure of their purpose. Your StreetPilot contains important map data files that should not be deleted. Be especially cautious of deleting files located in folders titled “garmin.” Additional Help For troubleshooting tips for using the StreetPilot with your computer to transfer files, see page 52. Step 6: Eject and Unplug the USB Cable When you are finished transferring files, double-click the Unplug or Eject icon in your system tray. Select “USB Mass Storage Device” and click Stop. Select the “GARMIN” drive and click OK. You can disconnect your StreetPilot from your computer now. System Tray

LOADING FILES ON YOUR 2730 Information about the Drive After you connect your StreetPilot to your computer, a Removable Disk Drive entitled “GARMIN” appears in your computer’s list of drives. If you are connected to several network drives, the “GARMIN” drive might not appear. To display the drive, right-click on a network drive and click Disconnect. Drive Storage Capacity To view available space for your “GARMIN” drive, right-click on the drive name and select Properties from the shortcut menu. 2730 Removable Disk Drive NOTE: On some Windows Operating Systems, the StreetPilot drive may not be named automatically. Refer to the Windows Help file for directions on renaming your StreetPilot drive.

25 LISTENING TO MUSIC AND AUDIBLE BOOKS LISTENING TO MUSIC AND AUDIBLE BOOKS Playing MP3 Files ➊ Touch Tools. ➍ Touch a category. ➏ Enjoy the music! ➎ Touch Play All. ➋ Touch Music Player. ➌ Touch Source to select MP3 mode. Touch Browse.

LISTENING TO MUSIC AND AUDIBLE BOOKS Using the MP3 Player Touch to adjust the volume. Touch to play the beginning of the song again and touch twice to play the previous song on the playlist. Touch and hold to rewind the song. Touch to skip to the next song on the playlist. Touch and hold to fast forward through the song. Touch to pause the song. Touch to resume play. Touch to repeat the song (repeat mode). Touch to shuffle the playlist (shuffle mode). Touch Playlist to view all of the songs in the playlist. To start playing the playlist from a different song, touch the song. Touch the album cover to view information about the song, artist, and album.

27 LISTENING TO MUSIC AND AUDIBLE BOOKS Listening to Audible Books Your StreetPilot provides several sample Audible books. These sample books are only portions of the book; to hear an entire book, purchase it from Audible.com. See pages 29–31. ➊ Touch Tools. ➍ Touch Browse. ➏ Touch . ➎ Touch the book title. ➋ Touch Music Player. ➌ Touch Source to select Audible Book mode.

LISTENING TO MUSIC AND AUDIBLE BOOKS Moving around the Book Touch to adjust the volume. Touch to play the previous section of the book. Touch and hold to skip back through the book (rewind). Touch to skip to the next section of the book. Touch and hold to skip forward through the book (fast forward). Touch to pause the book. Touch to resume playing the book. Touch the book cover art to view information about the book. Using Bookmarks To create a bookmark, touch and touch Save. To view your bookmarks, touch and then touch a bookmark. Touch Play to listen to the book from the bookmark. Touch Edit to delete the bookmark or rename the bookmark. Tip When you are playing an audible book, press the Page button on the remote control repeatedly to view other pages in the StreetPilot (such as the map).

29 LISTENING TO MUSIC AND AUDIBLE BOOKS Getting Started with Audible.com Before you can listen to audible books on your StreetPilot, you need to complete a few setup steps. These are all one time processes. Step 1: Load the USB Drivers If you have not already loaded the USB drivers to your computer, do so now. Before connecting the USB cable to your computer, load the USB drivers to your computer using the enclosed USB Driver CD-ROM. See page 21. Step 2: Create an Audible Account and download AudibleManager Go to http://garmin.audible.com and create an Audible.com account. After you create an account, download AudibleManager to your personal computer. You can purchase a book now, or wait until step 5. Step 3: Activate Your StreetPilot with AudibleManager Before you can listen to a book you have downloaded from Audible.com, you must activate your StreetPilot to use with AudibleManager. 1. Disconnect your StreetPilot from your computer: double-click the Unplug or Eject icon in your system tray. Select “USB Mass Storage Device” and click Stop. Select the StreetPilot drives and click OK. Unplug the USB cable from your StreetPilot. 2. From your computer’s desktop, double-click the AudibleManager icon to open AudibleManager. 3. In the “Choose your device” window, click the box next to “Garmin” to place a check mark in the box. Click Next.

LISTENING TO MUSIC AND AUDIBLE BOOKS 4. Enter your Audible user name and password. Click Next. 5. Connect your StreetPilot to your computer using the USB cable. Touch USB Mass Storage. Wait a few moments for AudibleManager to detect your StreetPilot. 6. Select Activate my player(s) and click Next. 7. Please wait while AudibleManager attempts to activate your StreetPilot. Upon completion, a message appears saying the process was successful. Click Finish. NOTE: If you are unable to connect to the Internet or have any other problems activating your StreetPilot, refer to the Audible Manager Help file. Select Help from the menu and click Help. Loading Audible Books to Your StreetPilot Each time you want to load an audible book to your StreetPilot, follow these steps: Step 1: Connect the StreetPilot to your computer 1. Connect the mini-USB connector to the back of the StreetPilot. 2. Connect the larger end of the cable to an available USB port on your computer.

31 LISTENING TO MUSIC AND AUDIBLE BOOKS Step 2: Purchase and download the book to your computer Refer to AudibleManager’s Help file for detailed instructions about downloading books to your computer and loading them on your StreetPilot. If you have not purchased audible books yet, you can purchase them now. They are added to your online library so you can download them to your computer. 1. From your computer’s desktop, double-click the AudibleManager icon to open AudibleManager. 2. Click the Go to My Library Online button on the top center of the window. Your Audible.com library opens, displaying the books you have purchased. 3. Click Get it Now to download the book to your computer. 4. Select a format and click Download. Step 3: Transfer the book to your StreetPilot Refer to AudibleManager’s Help file for detailed instructions about downloading books to your computer and loading them on your StreetPilot. You must first activate your StreetPilot before transferring books; see page 29. 1. Open AudibleManager. 2. Select the book title. Click Add to Garmin StreetPilot 2730 in the top left corner. 3. Select how much of the book you want to load. You can load small sections at a time to save memory. Click OK. AudibleManager transfers the book to your StreetPilot. 4. When you are finished, double-click the Unplug or Eject Hardware icon . Click Stop and OK.

LISTENG OVER SPEAKERS LISTENING TO AUDIO OVER THE VEHICLE’S SPEAKERS You can listen to the StreetPilot’s audio ouput over your vehicle’s speakers. Plug the 12-Volt adapter into an outlet in your vehicle and find an unused FM frequency on your radio. ➍ Touch FM Transmitter and then Next. ➊ From the Menu page, touch Volume. ➋ Touch Settings. ➌ Touch Audio Output. ➎ Use the + and - to match the frequency selected on your radio and touch Done. See the page 33 for tips on finding a good frequency for the FM transmitter.

33 LISTENG OVER SPEAKERS FM Transmitter Tips The FM transmitter is intended to transmit your StreetPilot’s audio to your car stereo’s antenna. Do not adjust your FM settings while you are driving your vehicle. When searching for an appropriate FM frequency on your vehicle’s radio, look for an unused frequency that has steady, consistent static. If you hear slight noises and sounds in the background of the static, choose a different frequency. Touch Test to play a sample audio output over your vehicle’s stereo. If the sound is not to your liking, try a different frequency and touch Test again. As you travel, you might need to change the frequency for the FM transmitter. A frequency not used by a radio station in your area might be used by a station elsewhere. As you drive, you may notice changes in the background static even though there is no FM station using that channel. You may notice this as you drive through intersections where certain kinds of traffic lights or other municipal electronic systems are operating. You might also notice this effect when the terrain changes, allowing distant stations to be received by your car stereo that were not received when you made your initial frequency selection. These and other sources of electrical interference may make it necessary to look for another frequency. The distance between the 12-Volt adapter, the StreetPilot, and the vehicle antenna may also affect the noise level. Vehicles with antennas located far away, such as a rear-mounted antenna, may experience more interference from outside noise sources than vehicles with front mounted antennas.

TRAFFIC TRAFFIC INFORMATION Using an XM Smart Antenna, your StreetPilot 2730 can receive and use traffic information. When a traffic message is received, your 2730 displays the event on the map and can change your route to avoid the traffic incident. For more information about the GXM 30 XM Smart Antenna, refer to the GXM 30 XM Smart Antenna for Automotive Owner’s Manual or visit the Garmin Web site (www.garmin.com). For coverage cities for XM NavTraffic, see www.xmnavtraffic.com Connecting the GXM 30 to Your StreetPilot Plug the cable from the GXM 30 into the USB connector on the back of the StreetPilot. For more information, refer to the GXM 30 XM Smart Antenna for Automotive Owner’s Manual. Viewing Traffic Events From the Menu page, touch Tools > Traffic. Select an item in the Traffic Events list to view the details. Touch Near… to view traffic at a different location. Touch Traffic Map to view area traffic events on a map. Color code Traffic symbol Traffic Events List Traffic source and signal strength

35 TRAFFIC Changing the Traffic Settings From the Menu page, touch Settings > Traffic. Traffic Setting Menu Subscriptions—view your traffic subscriptions. If you have the GXM 30 connected, touch Subscriptions to view the software version, your XM subscriptions, and the antenna’s Radio ID. Touch Subscribe to add an XM subscription. Symbols on Map—change the symbols used to indicate the type of traffic event. Touch Style to use American or International symbols. Touch each symbol to set the zoom scale at which each symbol appears on the map. Severity on the Map—select the scale at which the severity is shown on the map. Audio Notification—turn on or off the audio notification when a traffic event occurs on the road you are traveling on or the route you are navigating. Avoid Traffic—enable or disable the StreetPilot to avoid traffic events when generating a route. Adding an XM Traffic Subscription For more information about XM subscriptions, refer to the GXM 30 XM Smart Antenna for Automotive Owner’s Manual.

CUSTOMIZING THE STREETPILOT 2730 Adjusting the Volume From the Menu page, touch Volume. Touch the and to adjust the volume of the speaker. Touch Mute to silence the audio output. Touch Settings to open the Audio Settings page. See page 37 for more information. Touch Advanced to adjust the volume levels of the navigation prompts, XM, MP3/Audible books, and Line In device. Customizing the General Settings From the Menu page, touch Settings > General. GPS From the Menu page, touch Settings > General > GPS. See page 14. Changing the Language From the Menu page, touch Settings > General > Language. CUSTOMIZING THE STREETPILOT 2730

37 CUSTOMIZING THE STREETPILOT 2730 Voice Language—change the language for all voice prompts and messages. Touch the voice you want to use and touch OK. To delete that voice from your StreetPilot, touch Delete and OK. Your StreetPilot contains two different types of voice languages: text-to-speech and pre-recorded. Languages noted with a person’s name and (TTS) are text-to-speech (TTS) voices: for example, American English-Jill (TTS) is a text-to-speech voice. The text-to- speech voices “read” and “speak” the same words that appear on the StreetPilot. The voices have an extensive vocabulary, and they pronounce the street names as you approach turns. Languages without a person’s name are pre-recorded voices, which have a limited vocabulary and do not speak names of locations or streets. NOTE: If you change the Voice Language, your StreetPilot must restart to complete this change. Text Language—change the on-screen text to the selected language. Changing the Text Language does not change the language of map data or user-entered data. Speech Rate—select the rate at which prompts are spoken. Customizing the Keyboard From the Menu page, touch Settings > General > Keyboard. Input Type—select the English Only keyboard, or select West European to use diacritical characters. Customizing the Audio Settings From the Menu page, touch Settings > General > Audio. Audio Output—select Internal Speaker or FM Transmitter. For more information about broadcasting the StreetPilot audio over your vehicle’s stereo using the FM Transmitter, see page 32.

CUSTOMIZING THE STREETPILOT 2730 Attention Tone—turn on or off the attention tone sounded before voice prompts. Touch Screen Tone—turn on or off the tone sounded each time you touch the screen. Keypress Tone—turn on or off the tone sounded each time you press a button on the remote. Speed Adjusted Volume—select how much the volume increases as your speed increases. Low increases your volume only slightly; High increases your volume the most. Audio Jack—select Headphones when using headphones. Select Line Out if you are connecting to the audio input of another device (like a car stereo), and excessive audio noise is heard. Customizing Proximity Alerts From the Menu page, touch Settings > General > Proximity Alerts. This adjusts the visual and audio notifications for custom POIs you have loaded on the StreetPilot. See page 47 for more information. Changing Your Time Settings From the Menu page, touch Settings > General > Time. Time Zone—select your time zone. Time Format—select 12 or 24 hour time format. Daylight Saving—select Auto, Yes, or No. The Auto setting automatically adjusts the time for daylight saving based on your time zone. Selecting Units From the Menu page, touch Settings > General > Units. Change units of measure to Statute, Metric, or Custom.

39 CUSTOMIZING THE STREETPILOT 2730 Turning Safe Mode Off and On From the Menu page, touch Settings > General > Safe Mode. Turn on or off the Safe Mode, which disables all unit functions that require significant operator attention and could become a distraction while driving. Changing the Map Settings From the Menu page, touch Settings > Map. Map Detail—adjust the amount of detail shown on the map. Displaying more detail causes the map to redraw slowly. Orientation—change the perspective of the map. • 2D North Up—display the map in 2 dimensions (2- D) with North at the top. • 2D Track Up—display the map in 2 dimensions (2-D) with your direction of travel at the top of the screen. • 3D Track Up—display the map in 3 dimensions (3-D), with your direction of travel at the top of the screen. This is the default map view. Color Mode—select Day for a bright background. Select Night for a black background. Select Auto to automatically switch between the two. Auto Zoom—disable or enable automatic zooming on the map for optimal viewing. You can also specify a maximum Auto Zoom distance, 120 feet to 800 miles. Route Color—select the color of the route line. Dim Roads—dim roads that are not on your route. You can customize this setting to Never or While Routing.

CUSTOMIZING THE STREETPILOT 2730 Map Data Fields—adjust the size and content of the data fields shown on the Map page. Select None to remove the data fields to see more of the map. Select Wide to make the data fields larger; they take up more room on the map. Select Thin to see make the data fields thinner so you can see more of the map. See page 48 for more information. Text Size—adjust the size of text shown on the map. Zoom Level Detail—customize which map items appear at various zoom levels. For each map item, you can select Off, Auto, or a maximum zoom distance, from 120 feet to 800 miles. NOTE: More detail increases the time it takes the map to refresh. Detail Maps—enable and disable the detailed maps loaded in your StreetPilot. Changing the Navigation Settings From the Menu page, touch Settings > Navigation. Vehicle—specify your vehicle type. Preference—select a preference for route calculations. Ask Preference—select whether the unit asks for your preference each time it calculates a route. Next Turn Pop-up—select when the Next Turn pop-up window appears. Off-Route Recalculation—set the way the unit responds when off the route. You can silence the “off- route, recalculating” message here.

41 CUSTOMIZING THE STREETPILOT 2730 Continuous Auto Routing—enable or disable the Continuous Auto Routing feature. This feature allows the StreetPilot to continually search for a better route to your destination. Continuous Auto Routing may be useful if a traffic accident occurs or there are time-restricted turns on the current route. A appears on the map when the StreetPilot has found a better route than the one you are currently taking. Touch the to take the better route. Avoidance Setup—see page 19. Adjusting the Traffic Settings See page 35. Changing the Screen Settings From the Menu page, touch Settings > Screen. Brightness—select Manual and then touch Next. Touch the to decrease the brightness of the backlight or to increase it. Select Auto for automatic brightness adjustment. Calibrate Touch Screen—if you think the touch screen is not responding properly, you can calibrate the screen. Follow the on-screen instructions. Viewing Unit Information (About) From the Menu page, touch Settings > About > StreetPilot. The unit’s software version, audio version, and unit ID are listed.

CUSTOMIZING THE STREETPILOT 2730 XM—If you have an XM Smart Antenna, you can view the XM Antenna’s Radio ID. Connect the GXM 30 to the StreetPilot. Copyright Info—view copyright information about your StreetPilot. Restoring the Settings To restore the unit to its original settings, open the Menu page and touch Settings > Restore Defaults > Yes.

43 APPENDIX (Zoom) In—zooms into the map. (Zoom) Out—zooms out of the map. Menu—opens the Menu page. Press repeatedly to scroll through the Menu page, the Tools menu, and Settings menu. Map—opens the map page. Press repeatedly to scroll through the Map, Menu, and Music Player. Back—returns to the previous page and cancels data entry. Speak—announces the next turn or the GPS status. Thumb Stick—highlights options and moves the map pointer. Press in to make a selection. Page ▲ and ▼—scrolls through lists and pages. Vol + and - —raises and lowers the volume. Alphanumeric Keys—enters numbers and letters. To enter letters or numbers, press the key repeatedly until the correct character appears. (7)—acts like the rewind button in the Music Player. (9)—acts like the fast forward button in the Music Player. (0)—acts like the Pause/Play button in the Music Player. APPENDIX Using the Remote Control The remote control operates using two AAA batteries. To use the remote, aim it toward the IR window on the front left of the StreetPilot. MENU MAP BACK SPEAK IN OUT PAGE ZOOM 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 0 VOL

APPENDIX Looking at the StreetPilot 2730 Front IR window (aim the remote here) Back Right Side Left Side Audio Out (for headphones or line out) Power switch Mini-USB connector (for USB cable or GXM 30) Touch screen Light sensor Power connector (for 12-Volt or AC adapter)

45 APPENDIX Using the 2730 Unit Keys ➊ ➋ ➌ ➍ ➊ FIND—opens the Find menu. Press twice and the StreetPilot automatically starts calculating your route home (if specified). Press and hold to view Recent Finds. ➋ MENU—opens the Menu page. Press repeatedly to scroll through the Menu page, Tools menu, and Settings menu. ➌ MAP—opens the Map page. Press repeatedly to scroll through the Map page, Turns List, Trip Computer, and Music Player. ➍ SPEAK—announces voice directions. Installing the 2730 in Your Vehicle You can use the permanent or temporary adhesive disks or the non-skid friction mount to install the StreetPilot in your vehicle. To attach the mounting disk to your dashboard: 1. Clean and dry the area where you want to place the mount. 2. Remove one side of the backing from the adhesive and place the adhesive on the bottom of the mounting base. 3. Place the mounting base so the locking lever is facing you and then position the base on the cleaned area. Apply pressure to adhere the base to the dashboard. NOTE: The permanent adhesive disk is extremely difficult to remove. Only install if you are sure you want to leave the mount in that location.

APPENDIX To mount your StreetPilot 2730: 1. Align the power plug on the vehicle adapter to the connector and slide the plug into the connector until fully seated. 2. Slide the locking lever on the mounting base to the left (unlocked). 3. Slide the bottom of the StreetPilot into the mounting base until it clicks into place. Locking lever Release tab 4. Slide the base’s locking lever to the right (locked). 5. Plug the power cable into an available 12-Volt receptacle in your vehicle. 6. Route the cable so it does not interfere with vehicle operation.

47 APPENDIX Custom POIs (Points of Interest) Your StreetPilot 2730 can accept custom points of interest (POI) databases, available from various companies on the Internet. Some custom POI databases contain alert information for points such as safety cameras and school zones. Your StreetPilot can notify you when you approach one of these points. After downloading your POI database, use the Garmin POI Loader to install the POIs into your unit. The POI Loader is available at www.garmin.com/products /sp2730. Select Updates and Downloads. Refer to the POI Loader Help file for more information; press F1 to open the Help file. CAUTION: Garmin is not responsible for the consequences of using a custom POI database or the accuracy of the safety camera or other custom POI database. Adjusting the Proximity Alerts To turn on or off the proximity alerts, open the Menu page and touch Settings > General > Proximity Alerts. Audio Notifications—turn off or on the alerts that sound as you approach a custom POI. Visual Notification—turn off or on the pop-up alerts that appear as you approach a custom POI. Continuous Notification—select which alerts (which types of POIs) you will be continually notified of.

APPENDIX Customizing the Map Data Fields You can customize the information that appears in the data fields on the Map page. From the Menu page, touch Settings > Map > > Map Data Fields. ➊ Touch Wide or Thin. Touch Next. ➋ Touch a preprogrammed configuration or Custom Fields. ➌ Touch the data field you want to customize. ➍ Touch the type of data to appear in this field. ➎ Touch + and - to change the field layout. Touch OK. ➏ Touch Next. Repeat for the available data fields. When done, touch Finish. 1/2, 2/2, 1/3? 1/2 indicates this is your first choice out of two choices for the layout of the data field. 2/2 means this is your second choice. Some types of data fields allow you three choices, but some only provide one.

49 APPENDIX Technical Specifications Size: 5.6” W x 3.2” H x 2.0” D (14.3 x 8.0 x 5.0 cm) Weight: 0.93 lbs (420 g) Unit Case: Rugged; fully gasketed; IPX-7 waterproof* Display: Sunlight-readable, 17:9 WQVGA automotive color TFT display with touch screen and auto dimming; 454 pixels by 240 pixels. Map Storage: Pre-programmed internal memory Temperature: 5° to 158°F (-15° to 70°C) Power Supply Source: 12 VDC Usage: 12 watts maximum @ 13.8 VDC Fuse: 3AG - 1.0 Amp Remote Control: Two AAA alkaline batteries (not included) For a complete list of specifications, visit the Garmin Web site: www.garmin.com/products/sp2730/spec.html. Contact your local waste disposal department for information on properly disposing of the unit. * The Remote Control is not waterproof. Changing the Fuse A 3AG 1.0 Amp fast blow fuse is located at the tip of the vehicle adapter. If you need to change the fuse, simply unscrew the black, round end piece and replace the fuse. Unscrew

APPENDIX Updating the Software and Map Data If you register your 2730, you will receive notification of software and map updates. To register your 2730, go to www.garmin.com/registration/selectreg.jsp. To update the 2730 software: 1. Load the USB drivers using the enclosed CD-ROM. See page 21 for more information. 2. Connect the USB cable to your 2730 and your computer. 3. Connect the AC cable to the power connector on the back of the StreetPilot. Turn on the StreetPilot. 4. Touch Garmin Mode. 5. Go to at www.garmin.com/products/sp2730. Select Updates and Downloads. 6. Click Download next to the unit software. 7. Read and agree to the terms. Click Download. 8. Select Run (or Open). Your software is updated. Check www.garmin.com/unlock/update.jsp to see if an update for your map software is available. Using a Remote GPS Antenna Use an optional external remote GPS antenna (Garmin GA 25) when using the unit in a vehicle with a coated windshield or an in-screen heating system, which can block GPS signals. Connect the antenna to the MCX connector located on the back of the unit. To purchase, go to the Garmin Web site: www.garmin.com/products /sp2730. Click Accessories.

51 APPENDIX FCC Compliance The unit complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE. These limits are designed to provide more reasonable protection against harmful interference in a residential installation, and are more stringent than “outdoor” requirements. Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult an experienced radio/TV technician for help. The unit does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operated this device under Part 15 regulations. Software License Agreement BY USING THE STREETPILOT 2730, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin grants you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin. You acknowledge that the Software is the property of Garmin and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software are valuable trade secrets of Garmin and that the Software in source code form remains a valuable trade secret of Garmin. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America. Declaration of Conformity Hereby, Garmin declares that the StreetPilot 2730 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To view the full Declaration of Conformity, see the Garmin Web site for your Garmin product: www.garmin.com/products/sp2730. Click Manuals and then select Declaration of Conformity.

APPENDIX USB Interface Troubleshooting Problem/Question Solution/Answer How do I know my StreetPilot is in USB Mass Storage Mode? When your StreetPilot is in USB Mass Storage Mode, a picture of a StreetPilot connected to a computer is shown. Also, your computer should show a new Removable Disk Drive listed in My Computer. My computer never senses that the StreetPilot is connected. 1. Unplug the USB cable from your computer. 2. Load the USB drivers to your computer. See page 21. 3. Plug the USB cable into your computer. Select USB Mass Storage. I cannot find any drives named “GARMIN” in my list of drives. Try the solution listed above. If you have several network drives mapped on your computer, Windows may have trouble assigning drive letters to your StreetPilot drives. Follow the steps on page 53 to assign your drive letters. A message saying “Unsafe Removal of Device” appears when I unplug the USB cable. When you are ready to disconnect your StreetPilot from your computer, double-click the Unplug or Eject icon in your system tray. Select “USB Mass Storage Device” and click Stop. Select the StreetPilot drives and click OK. You can disconnect your StreetPilot from your computer now.

53 APPENDIX How can I rename my StreetPilot drives? 1. Open My Computer. 2. Select the drive you want to rename. 3. Right-click and select Rename. 4. Type the new name and press the Enter key. How do I map my StreetPilot drives in Windows? 1. Plug in the USB cable to the StreetPilot and your computer. 2. Flip the Power switch down on your StreetPilot to turn it on. 3. On your computer’s desktop, click Start > Settings > Control Panel > Administrative Tools > Computer Management > Storage > Disk Management. 4. Select a StreetPilot removable disk drive. Right-click and select Change Drive Letter and Path…. 5. Select Edit…, select a drive letter from the drop-down list, and click OK. Tip Be sure you have loaded the USB drivers before you connect the USB cable. See page 21 for information.

APPENDIX 2730 Troubleshooting Problem/Question Solution/Answer The touch screen is not responding to my taps. Calibrate the screen. Press Menu on the remote. Use the remote to select Settings > Display > Recalibrate. Follow the on-screen instructions. The audio levels are unequal. From the Menu page, touch Volume > Advanced. Adjust the levels of each audio item. How do I clear all my user data? Turn off the StreetPilot and then turn it back on. During start up, press and hold the Find button. Keep pressing the button until the message “Do you really want to erase all use data?” appears. Touch Yes to clear all user data. All original settings are restored. Your Recent Selections, audible bookmarks, and any saved XM data (such a Artists and Presets) are also deleted. How do I view weather and stock information on my 2820? You must have an XM antenna connected and an active XM subscription that includes weather and stock data. Information about XM NavTraffic and XM Satellite Radio services can be found at the XM NavTraffic Web site www. xmnavtraffic.com or www.xmradio.com for XM Radio information.

55 APPENDIX Limited Warranty This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will at its sole option repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. This warranty does not cover failures due to abuse, misuse, accident, or unauthorized alteration or repairs. THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. Some states do not allow the exclusion of incidental or consequential damages, so the above limitations may not apply to you. Garmin retains the exclusive right to repair or replace the unit or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. To obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for shipping instructions and an RMA tracking number. The unit should be securely packed with the tracking number clearly written on the outside of the package. The unit should then be sent, freight charges prepaid, to any Garmin warranty service station. A copy of the original sales receipt is required as the proof of purchase for warranty repairs. Garmin International, Inc. Tel. 913/397.8200 Fax. 913/397.8282 Garmin (Europe) Ltd. Tel. 44/0870.8501241 Fax 44/0870.8501251 Online Auction Purchases: Products sold through online auctions are not eligible for rebates or other special offers from Garmin. Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. Garmin will not replace missing components from any package purchased through an online auction. International Purchases: A separate warranty is provided by international distributors for units purchased outside the United States. This warranty is provided by the local in-country distributor and this distributor provides local service for your unit. Distributor warranties are only valid in the area of intended distribution. Units purchased in the United States or Canada must be returned to the Garmin service center in the United Kingdom, the United States, Canada, or Taiwan for service.

INDEX INDEX Symbols 2 Dimensional 39 3 Dimensional 39 A Audible.com 29 AudibleManager 29 audible books 27 bookmarks 28 playing 27 transferring 31 audio jack 38 over the vehicle’s speakers 32 settings 37 version 41 avoidances 19 B better route 2, 41 bookmarks 28 brightness of the screen 41 browse map 6 C caring for your StreetPilot vi clear all user data 54 color mode 39 connecting the USB cable 21 contact Garmin i continuous auto routing 41 coordinates 10 customizing the StreetPilot 36–42 general settings 36 map settings 39 navigation settings 40 restoring the settings 42 screen settings 41 volume 36 customizing the StreetPilot 2820 map data fields 48 custom avoids 19 custom POIs 47 D data fields changing 48 default settings 42 deleting all saved routes 18 bookmarks 28 files from the StreetPilot 23 routes 16 saved locations 11 detours 18 diacritical characters 37 disconnecting your StreetPilot 23, 52 E edit/review points 16 editing saved places 10 EGNOS 14 eject USB 23 elevation 10 F favorites. See My Locations adding 6 FCC compliance 51 finding places 3–7 address 3 expand your search 7 item on the map 5 narrow your search 7 recent finds 6 restaurant 1 saved places 9 spell the name 3 find near point 6 FM Transmitter 32, 33 following your route 2 fuse 49 G GARMIN drive does not appear 24 general settings 36 Go home 9 GPS info page 14 settings 36

57 INDEX H home location 9 I indoor use 14 insert in current route 6 installing the StreetPilot 45 K keyboard, on-screen customizing 37 L language 36 license agreement 51 locations. See My Locations category 10 home 9 saving 8 symbol 10 M map data fields, changing 48 Map page 12 browse 5 customize 39 orientation 39 settings 39 update maps 50 zoom 5, 12, 13 metric units 38 midpoints in the route 17 mileage logs 20 My Locations 8–11 Favorites 9 Go Home 9 Recent Finds 6 saving 8 N narrowing your search 7 navigating a saved route 18 navigation settings 40 Near button 7 North Up 39 O odometer 13 off-route recalculation 40 original settings 42 P places editing 10 finding 3–7 saving 8 POIs (Points of Interest) 47 position icon 12 product support i proximity alert 47 R recalculating 18, 40 Recent Finds 6 remote control vi, 43 renaming bookmark 28 route 16 saved location 10 resetting clear all user data 54 max. speed 13 mileage log 20 trip computer 13 restoring the settings 42 routes 15–19 add point 6 auto arrange 17 create new 15 detour 18 edit a saved route 16 navigate a saved route 18 preferences 40 re-order points 17 remove points 17 save the active route 18 stop 18 S Safe Mode 39 saved places 8 deleting 11 editing 10 finding 9 naming 10 renaming 16 saved routes

INDEX deleting 18 editing 16 navigating 18 saving the active route 18 screen settings 41 serial number i, i–iii settings audio 37 general 36 GPS 36 language 36 map 39 navigation 40 restoring defaults 42 screen 41 time 38 traffic 35 units of measure 38 volume 36 set position 14 software license agreement 51 software version 41 speaker volume 36 specifications 49 speed (speedometer) 13 spell 7 stocks 14, 54 stops in the route 17 stop navigation 18 stop USB 23 storing the unit vi symbol for locations 10 T text language 37 time 38 touch screen vi, 41 track log 20 track up 39 traffic information 34–35 transferring files to your StreetPilot 22 trip computer 13 troubleshooting 54 USB 52 turn List 13 U unit ID StreetPilot 41 XM 42 unplug USB 23 USB 21, 23 use indoors 14 V vehicle type 40 via points 17 viewing the map 12 voice language 37 volume 36 W weather 14, 54 Where To? 3–7 X XM 14, 41, 54 traffic 34 Z zoom 5, 12, 13

Garmin products, visit the Garmin Web site at www.garmin.com. © Copyright 2005–2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K. Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan www.garmin.com Part Number 190-00476-00 Rev. C